/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see .
*
*/
#pragma once
/**
* lcd/dogm/ultralcd_DOGM.h
*/
#include "../../inc/MarlinConfigPre.h"
#include
#include "HAL_LCD_class_defines.h"
//#define ALTERNATIVE_LCD
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
// RepRapWorld Graphical LCD
#define U8G_CLASS U8GLIB_ST7920_128X64_4X
#if DISABLED(SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN) && (LCD_PINS_ENABLE == MOSI_PIN)
#define U8G_PARAM LCD_PINS_RS
#else
#define U8G_PARAM LCD_PINS_D4, LCD_PINS_ENABLE, LCD_PINS_RS
#endif
#elif ENABLED(U8GLIB_ST7920)
// RepRap Discount Full Graphics Smart Controller
// and other variant LCDs using ST7920
#if DISABLED(SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN) && (LCD_PINS_ENABLE == MOSI_PIN)
#define U8G_CLASS U8GLIB_ST7920_128X64_4X_HAL // 2 stripes, HW SPI (Shared with SD card. Non-standard LCD adapter on AVR.)
#define U8G_PARAM LCD_PINS_RS
#else
#if ENABLED(ALTERNATIVE_LCD)
#define U8G_CLASS U8GLIB_ST7920_128X64_4X // 2 stripes, SW SPI (Original u8glib device)
#else
#define U8G_CLASS U8GLIB_ST7920_128X64_RRD // Adjust stripes with PAGE_HEIGHT in ultralcd_st7920_u8glib_rrd.h
#endif
#define U8G_PARAM LCD_PINS_D4, LCD_PINS_ENABLE, LCD_PINS_RS // AVR version ignores these pin settings
// HAL version uses these pin settings
#endif
#elif ENABLED(CARTESIO_UI)
// CartesioUI LCD
#if ENABLED(ALTERNATIVE_LCD)
#define U8G_CLASS U8GLIB_DOGM128_2X // 4 stripes
#define FORCE_SOFT_SPI // SW-SPI
#else
#define U8G_CLASS U8GLIB_DOGM128_2X // 4 stripes (HW-SPI)
#endif
#elif ENABLED(U8GLIB_LM6059_AF)
// Based on the Adafruit ST7565 (https://www.adafruit.com/products/250)
#if ENABLED(ALTERNATIVE_LCD)
#define U8G_CLASS U8GLIB_LM6059 // 8 stripes (HW-SPI)
#else
#define U8G_CLASS U8GLIB_LM6059_2X // 4 stripes (HW-SPI)
#endif
#elif ENABLED(U8GLIB_ST7565_64128N)
// MaKrPanel, Mini Viki, Viki 2.0, AZSMZ 12864 ST7565 controller
#define SMART_RAMPS MB(RAMPS_SMART_EFB, RAMPS_SMART_EEB, RAMPS_SMART_EFF, RAMPS_SMART_EEF, RAMPS_SMART_SF)
#define U8G_CLASS U8GLIB_64128N_2X_HAL // 4 stripes (HW-SPI)
#if SMART_RAMPS || DOGLCD_SCK != SCK_PIN || DOGLCD_MOSI != MOSI_PIN
#define FORCE_SOFT_SPI // SW-SPI
#endif
#elif ANY(FYSETC_MINI_12864, MKS_MINI_12864, ENDER2_STOCKDISPLAY)
// The FYSETC Mini 12864 display // "4 stripes"
// The MKS_MINI_12864 V1/V2 aren't exact copies of the MiniPanel.
// Panel management is in u8g_dev_uc1701_mini12864_HAL.cpp with
// extra delays added to remove glitches seen with fast MCUs.
#define U8G_CLASS U8GLIB_MINI12864_2X_HAL // 8 stripes (HW-SPI)
#elif ENABLED(MINIPANEL)
#if ENABLED(ALTERNATIVE_LCD)
#define U8G_CLASS U8GLIB_MINI12864
#else
#define U8G_CLASS U8GLIB_MINI12864_2X // 8 stripes (HW-SPI)
#endif
#elif EITHER(MKS_12864OLED_SSD1306, FYSETC_242_OLED_12864)
// MKS 128x64 (SSD1306) OLED I2C LCD
// - or -
// FYSETC OLED 2.42" 128 × 64 FULL GRAPHICS CONTROLLER
#define FORCE_SOFT_SPI // SW-SPI
#if ENABLED(ALTERNATIVE_LCD)
#define U8G_CLASS U8GLIB_SSD1306_128X64_2X // 4 stripes
#else
#define U8G_CLASS U8GLIB_SSD1306_128X64 // 8 stripes
#endif
#elif ENABLED(ZONESTAR_12864OLED_SSD1306)
// Zonestar SSD1306 OLED SPI LCD
#define FORCE_SOFT_SPI // SW-SPI
#if ENABLED(ALTERNATIVE_LCD)
#define U8G_CLASS U8GLIB_SH1306_128X64_2X // 4 stripes
#else
#define U8G_CLASS U8GLIB_SH1306_128X64 // 8 stripes
#endif
#elif EITHER(MKS_12864OLED, ZONESTAR_12864OLED)
// MKS 128x64 (SH1106) OLED I2C LCD
// - or -
// Zonestar SH1106 OLED SPI LCD
#define FORCE_SOFT_SPI // SW-SPI
#if ENABLED(ALTERNATIVE_LCD)
#define U8G_CLASS U8GLIB_SH1106_128X64_2X // 4 stripes
#else
#define U8G_CLASS U8GLIB_SH1106_128X64 // 8 stripes
#endif
#elif ENABLED(U8GLIB_SH1106_EINSTART)
// Connected via motherboard header
#define U8G_CLASS U8GLIB_SH1106_128X64
#define U8G_PARAM DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, LCD_PINS_DC, LCD_PINS_RS
#elif ENABLED(U8GLIB_SH1106)
// Generic SH1106 OLED I2C LCD
#if ENABLED(ALTERNATIVE_LCD)
#define U8G_CLASS U8GLIB_SH1106_128X64_2X_I2C_2_WIRE // 4 stripes
#else
#define U8G_CLASS U8GLIB_SH1106_128X64_2X // 4 stripes
#endif
#define U8G_PARAM (U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST) // I2C
#elif ENABLED(U8GLIB_SSD1309)
// Generic support for SSD1309 OLED I2C LCDs
#define U8G_CLASS U8GLIB_SSD1309_128X64
#define U8G_PARAM (U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST) // I2C
#elif ENABLED(U8GLIB_SSD1306)
// Generic SSD1306 OLED I2C LCD
#if ENABLED(ALTERNATIVE_LCD)
#define U8G_CLASS U8GLIB_SSD1306_128X64_2X_I2C_2_WIRE // 4 stripes
#else
#define U8G_CLASS U8GLIB_SSD1306_128X64_2X // 4 stripes
#endif
#define U8G_PARAM (U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST)
#elif TFT_SCALED_DOGLCD
// Unspecified 320x240 TFT pre-initialized by built-in bootloader
#define U8G_CLASS U8GLIB_TFT_320X240_UPSCALE_FROM_128X64
#if ENABLED(FSMC_GRAPHICAL_TFT)
#define U8G_PARAM FSMC_CS_PIN, FSMC_RS_PIN
#else
#define U8G_PARAM -1, -1
#endif
#else
#if ENABLED(ALTERNATIVE_LCD)
#define U8G_CLASS U8GLIB_DOGM128 // 8 stripes (HW-SPI)
#else
#define U8G_CLASS U8GLIB_DOGM128_2X // 4 stripes (HW-SPI)
#endif
#endif
// Use HW-SPI if no other option is specified
#ifndef U8G_PARAM
#if ENABLED(FORCE_SOFT_SPI)
#define U8G_PARAM DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0 // SW-SPI
#else
#define U8G_PARAM DOGLCD_CS, DOGLCD_A0 // HW-SPI
#endif
#endif
// For selective rendering within a Y range
#define PAGE_OVER(ya) ((ya) <= u8g.getU8g()->current_page.y1) // Does the current page follow a region top?
#define PAGE_UNDER(yb) ((yb) >= u8g.getU8g()->current_page.y0) // Does the current page precede a region bottom?
#define PAGE_CONTAINS(ya, yb) ((yb) >= u8g.getU8g()->current_page.y0 && (ya) <= u8g.getU8g()->current_page.y1) // Do two vertical regions overlap?
extern U8G_CLASS u8g;