df09532a9c
Reassign FIL_RUNOUT_PIN for ReARM boards ( #15519 )
...
Reassign FIL_RUNOUT_PIN from P1_18 to P1_19
P1_18 is connected to a buffer in order to output 5V making it unsuitable for input.
2019-10-12 21:02:20 +01:00
59378db7de
Eliminate clutter in Formbot T-Rex 3 Configuration.h file
...
The extra clutter was making the Junction Deviation patch script calculate the wrong value.
(The script wasn't smart enough to see the extra lines were commented out and used the wrong values in the calculation.)
All fixed now with a JUNCTION_DEVIATION_MM calculated at .017
2019-10-11 17:11:24 -05:00
c8e348731f
Correct Junction Deviation value for Formbot Raptors
...
Re-apply the formula .4 * V^2 / Default_Acceleration to work correctly in Raptor configuration.h file.
(The problem is there are multiple XJerk and YJerk values declared based on the step sticks used on the printer.)
This change should provide correct values for all setups.
2019-10-11 16:52:47 -05:00
7a1fa2177c
Eliminate multiple DEFAULT_ACCELERATION declarations.
...
Re-calculate and fix the Junction Deviation value using correct DEFAULT_ACCELERATION number.
2019-10-11 16:31:24 -05:00
1df90aaf0e
Followup to num2str update ( #15518 )
2019-10-11 08:45:15 -05:00
ac8083588b
Add config for Wanhao Duplicator i3 v2.1
2019-10-11 00:59:58 -05:00
e79666a82b
Followup to "Fix G2/G3 rounding" ( #15510 )
2019-10-10 21:16:37 -05:00
b20d5a7cc6
Estimate Remaining Time (graphical display) ( #15497 )
2019-10-10 21:03:33 -05:00
5641adb01b
Clean up stray tabs
2019-10-10 20:16:16 -05:00
d8aeeb8ff6
Fix G2/G3 rounding error ( #15507 )
2019-10-10 19:50:08 -05:00
2cf35267c4
Set Junction Deviation value from Jerk and Default Acceleration ( #15509 )
...
Formula: `0.4 * sq(min(xjerk, yjerk)) / (default accel)`
2019-10-10 19:44:15 -05:00
6f60838736
Fix PAUSE_MODE_CHANGE_FILAMENT menu item ( #15501 )
2019-10-10 19:39:32 -05:00
ac466ecf74
Change Junction Deviation to Classic Jerk ( #15505 )
2019-10-10 19:31:59 -05:00
3664beec29
Don't refresh on status line changes
2019-10-10 19:29:17 -05:00
13cf417a98
[cron] Bump distribution date
2019-10-10 00:00:04 -05:00
541a9f2b85
Defer test of Lulzbot UI for now
2019-10-09 23:39:22 -05:00
b119c14017
Clean up LCD print, align ( #15498 )
2019-10-09 20:41:44 -05:00
46763efb75
Fix tool-change move with hotend offset ( #15491 )
2019-10-09 19:48:00 -05:00
6a865a6146
Multi-language support ( #15453 )
2019-10-09 19:46:10 -05:00
dc14d4a13c
Improvements and fixes to Lulzbot UI ( #15490 )
2019-10-09 19:44:49 -05:00
e6055dce76
Followup to position refactor
2019-10-08 22:08:05 -05:00
b4d48fdc91
Followup to #15481
2019-10-08 21:38:02 -05:00
af80653f3f
Always report all PIDs in M503
...
Fix #14474
2019-10-08 21:07:19 -05:00
a525cc06c1
Add ARC_SUPPORT to DUE tests
2019-10-08 20:46:01 -05:00
914605c89c
gcc is forgiving of stray ;
2019-10-08 20:36:39 -05:00
89490171ef
Use "concatenatable" language codes
2019-10-08 20:17:23 -05:00
c0005e939c
Enable junction deviation by default ( #15481 )
2019-10-08 19:42:18 -05:00
1df6c7a46c
Work around a compiler bug
...
See #15478
2019-10-08 19:27:03 -05:00
5becda25c5
Followup to E renumbering
2019-10-08 17:37:17 -05:00
cb1cb72c76
Fix Move Z menu item
2019-10-08 17:24:40 -05:00
e34aa1ff8f
Add A8, A8 Plus, A6 logos to configs ( #15489 )
...
Co-Authored-By: Leo <leo@nutz.de >
2019-10-08 15:33:24 -05:00
58f81f8e7e
Followup to progress override ( #15488 )
2019-10-08 15:24:14 -05:00
d45ab47139
[cron] Bump distribution date
2019-10-08 14:33:57 -05:00
9dcccc11ba
Fix extra condition
2019-10-07 22:36:49 -05:00
cc822c1a05
Use lambdas in menus, where possible ( #15452 )
2019-10-07 19:44:33 -05:00
cd791f1cba
Move long tests to the end
2019-10-07 19:41:15 -05:00
59508edf64
Suppress data[] array warning
2019-10-07 19:32:23 -05:00
e84389c976
Fix G2/G3 workspace plane parameters ( #15475 )
2019-10-07 17:09:20 -05:00
19b7be067c
Allow M73 to override SD position ( #15449 )
2019-10-07 16:38:58 -05:00
d04561805b
Support for BTT SKR Mini E3 v1.2 ( #15476 )
2019-10-07 15:45:11 -05:00
71526fa5ce
Fix ExtUI onMeshUpdate event ( #15477 )
2019-10-07 15:39:52 -05:00
56595a4c9c
Improve G2/G3 precision
...
See https://github.com/MarlinFirmware/Marlin/issues/14745#issuecomment-538781253
2019-10-07 00:03:17 -05:00
211ff67440
Patch blocking and manual moves
2019-10-06 23:58:19 -05:00
c6ffa7f38d
MKS Robin: SD pins not required (SDIO) ( #15474 )
2019-10-06 23:20:43 -05:00
519cc1bc67
NUM_AXIS is now obsolete
2019-10-06 22:18:16 -05:00
4134c6398a
Update 'mftest' (local test build) script
2019-10-06 22:04:28 -05:00
9188ce1a8d
Add JOIN for simple append
2019-10-06 22:01:06 -05:00
51ae13fc8c
Compact MIN/MAXTEMP_ALL
2019-10-06 21:58:58 -05:00
5449088a8e
Fix Japanese language extra define
2019-10-06 21:58:58 -05:00
fc6a0937b8
Improve Malyan M200 integration ( #15462 )
2019-10-05 22:37:22 -05:00
