Nils Hasenbanck
f9299c4461
Make timer definition in pin files for STM32 possible ( #12874 )
...
RemRam needs to redefine a particular timer to work correctly. The HAL did foresee this possibility and checks if the timer was already defined for either the stepper or temperature timer.
Prior to this commit the header file for the timers couldn't see those definitions in the pin file, but this commit will fix this.
Tested on an actual hardware to verify. (It wouldn't boot without it.)
2019-01-12 14:40:49 -06:00
InsanityAutomation
082f6a27de
ADAPTIVE_FAN_SLOWING extension to hotend thermal protection ( #12853 )
2019-01-12 00:41:48 -06:00
Scott Lahteine
459f4fef60
Fix Temperature::init bug with HEATER_4_PIN
2019-01-11 22:54:26 -06:00
InsanityAutomation
a403d9a50c
Improve menu pause / resume ( #12876 )
2019-01-11 20:42:11 -06:00
Alain Martel
432c21456f
Add 3DFabXYZ Migbot example config ( #12775 )
...
Co-Authored-By: Alain Martel <alain74martel@gmail.com>
2019-01-11 20:41:20 -06:00
Scott Lahteine
fb8111553e
getStatus => report_status
2019-01-11 19:51:00 -06:00
Chris Pepper
2919f3045d
[LPC176x] Update PIO extrascript ( #12878 )
2019-01-11 19:45:33 -06:00
Scott Lahteine
19fea772e5
Use E_AXIS_N where it makes sense
2019-01-11 19:42:34 -06:00
Scott Lahteine
0d30ccf767
Tweaks to TMC26XStepper
2019-01-11 19:42:34 -06:00
HackingGulliver
1fd8e2c649
Fix: Junction Deviation calculates wrong cos(theta) on CoreXY ( #12879 )
2019-01-11 19:25:48 -06:00
Scott Lahteine
b402040059
Split bed size sanity check into two
2019-01-11 15:49:57 -06:00
Chris Barr
1d33784bf9
Add RUMBA32 Board ( #12856 )
2019-01-10 19:34:31 -06:00
Ondřej Nový
a0ef6198ff
Level bed corners Z-hop height option ( #12858 )
2019-01-10 19:15:17 -06:00
Karl Andersson
8ae6f1e556
Fix errors and some compiler warnings with HAL_STM32 PlatformIO build ( #12869 )
2019-01-10 19:01:31 -06:00
Scott Lahteine
e6484d9dab
Return to status when SD card is removed
2019-01-10 15:43:31 -06:00
Scott Lahteine
5f2d75f45b
Move PINS_DEBUGGING to @section develop
2019-01-08 20:05:05 -06:00
Scott Lahteine
da42f27c9e
Use maths macros for ceil/floor
2019-01-05 21:21:02 -06:00
Ludy
de4561c980
VORON Add LCD option BEEP_ON_FEEDRATE_CHANGE ( #12822 )
2019-01-05 14:12:05 -06:00
Giuliano Zaro
709a6356f7
Remove obsolete test conditions ( #12829 )
2019-01-05 14:02:45 -06:00
Luu Lac
bcf347403b
Fix M106 extruder & fan count ( #12820 )
2019-01-05 14:01:35 -06:00
Kaushik Vemparala
ba7e35cbab
Add LCD option BEEP_ON_FEEDRATE_CHANGE ( #12774 )
2019-01-04 19:30:08 -06:00
jmz52
d372e7e477
SDIO support for STM32F1 ( #12782 )
2019-01-04 13:38:07 -06:00
Marcio Teixeira
6a8fb0f25f
Simplify backlash compensation code. ( #12813 )
...
- Use `TEST(dm,axis)` to determine directions instead of doing comparisons.
- Remove recomputation of `millimeters` and `delta_mm` since backlash compensation should not affect the distance over which material is extruded.
2019-01-04 13:30:56 -06:00
luxflow
7f244f9b9c
Update LPC SD pins for BIQU SKR ( #12767 )
...
(Exactly matching the Azteeg X5 MINI Wifi)
2019-01-03 10:44:00 -06:00
jmz52
813a4ea107
Add support for Mks Robin TFT display ( #12706 )
...
* Add support for MKS Robin TFT display
- Add support for MKS Robin TFT display and encoder for MKS Robin board.
- Generic 128x64 UI with x2 upscale is used (for now).
- Tested on MKS Robin TFT V2.0 with ST7789V controller.
2019-01-03 10:38:39 -06:00
jmz52
c4237b529f
Fix MKS Mini and SD card conflct over SPI mode ( #12783 )
2019-01-03 10:27:53 -06:00
Phr3d13
01f75591c6
Fix GTM32_PRO_VB Serial and HAL via watchdog ( #12753 )
...
Move `watchdog_reset` from `.h` to `.cpp` to eliminate the need to include `MarlinConfig.h` in a HAL-related file.
2019-01-03 09:46:49 -06:00
Scott Lahteine
288340cb6c
Followup to VORON
2019-01-03 09:14:14 -06:00
Scott Lahteine
2aaa681dea
Remove unused Cheaptronic pins
2019-01-03 08:58:55 -06:00
Marcio Teixeira
81e753064a
Fix ExtUI compile warnings and error ( #12799 )
2019-01-03 08:36:43 -06:00
Ludy
74c47803f7
Add VORON printer ( #12705 )
2019-01-03 06:27:03 -06:00
kAdonis
637fb20c75
Allow 4 fan animation frames ( #12772 )
2019-01-03 06:03:06 -06:00
petieken
d9cf5e4883
Update pins_BIQU_SKR_V1.1.h ( #12758 )
2019-01-02 13:50:05 -06:00
TheLongAndOnly
cb643d87df
Adding missing code for triple Z-stepper auto-align ( #12786 )
2019-01-01 18:22:04 -06:00
Ludy
14a7faf087
Fix compile warning comparison uint and int ( #12788 )
2019-01-01 18:20:12 -06:00
Marcio Teixeira
60cb36bef3
Misc. improvements ( #12747 )
...
* Make ExtUI respect MAXTEMP limits
- Temperatures are now clamped by MAXTEMP limits rather than arbitrary values.
* Speed up USB init, add status
- Speed up USB initialization
- Show status message if init failed
* Enable status messages for EXTENSIBLE_UI
* Adjust max limit to MAX_TEMP - 15
* Misc. tweaks to formatting, const, etc.
2019-01-01 15:17:48 -06:00
InsanityAutomation
4f2473053c
Fix M106 with SINGLENOZZLE
2018-12-31 20:10:18 -06:00
Reece Kibble
7557f8d68c
Rename all Stm32f1 to STM32F1 ( #12639 )
2018-12-31 16:36:49 -06:00
Scott Lahteine
371d9a1acf
Fix line-endings, formatting, whitespace
...
Followup to #12770
2018-12-30 15:38:20 -06:00
Ludy
135c74017c
Fix compile DEBUG_EEPROM_READWRITE error ( #12746 )
2018-12-30 11:37:20 -06:00
Giuliano Zaro
54ba44ee37
Fix bad sanitycheck ( #12748 )
2018-12-30 10:44:15 -06:00
swilkens
b01a630bd0
[2.0.x] Correct Ender 3 bed size ( #12769 )
2018-12-30 10:42:47 -06:00
Alain Martel
44ed34475b
Add MKS BASE 1.4 pins ( #12770 )
2018-12-30 10:40:22 -06:00
Roxy-3D
3a16cb6d7f
Slightly Slower Max X Axis speed
...
On some T-Rex 2+ machines the previous max step rate could lose steps....
2018-12-28 09:14:48 -06:00
Ludy
814d93c7cf
Fix G33 sprintf output warning ( #12738 )
2018-12-27 18:05:42 -06:00
Ludy
3877bf9704
Fix compile error with delta and sensorless homing ( #12740 )
2018-12-27 17:51:22 -06:00
Ludy
cfc5e96b4b
Move JD to Config.h (and fix jerk->eeprom bug) ( #12720 )
2018-12-27 15:29:39 -06:00
Roman Moravčík
594898aea7
Limit hotend / bed temperature to maxtemp-15 ( #12713 )
2018-12-27 11:46:05 -06:00
InsanityAutomation
530ef5846f
Make nomove=false for toolchange on filament swap ( #12739 )
2018-12-27 11:38:35 -06:00
InsanityAutomation
14ddda285c
Confirmation on Abort SD print ( #12717 )
2018-12-27 11:36:39 -06:00