f38570ac55
Add custom user menu title ( #11769 )
2018-09-19 15:04:34 -05:00
c5e5cc5e9f
Fix some trailing whitespace, macros
2018-09-17 17:30:04 -05:00
378f354939
IDEX Scaled Duplication is still under development
...
Take it out of the menu until it is tested and working.
2018-09-17 10:26:44 -05:00
0780913848
IDEX Improvements ( #11848 )
2018-09-17 01:06:22 -05:00
39732838b4
Tweak indent of Chinese languages
2018-09-17 00:58:32 -05:00
1718eff54a
Code changes supporting up to 6 extruders
2018-09-16 22:32:53 -05:00
c437bb08f1
Overhaul of the planner ( #11578 )
...
- Move FWRETRACT to the planner
- Combine leveling, skew, etc. in a single modifier method
- Have kinematic and non-kinematic moves call one planner method
2018-09-16 21:24:15 -05:00
84ed9b5a63
Send "G33 S P1" for Delta Height Calibration ( #11831 )
2018-09-15 20:17:35 -05:00
8bce5370c7
Updated slovak translation ( #11807 )
2018-09-12 03:29:17 -05:00
64d629ba2a
[2.0.x] Italian language fix ( #11796 )
2018-09-12 03:28:22 -05:00
06949ae510
Fix MSG_FILAMENT_CHANGE_HEAT_1 for small LCD
2018-09-10 23:21:37 -05:00
d882717d98
Save some PROGMEM with constexpr ( #11798 )
...
When possible, make `active_extruder` a `constexpr` to save some PROGMEM.
2018-09-10 23:09:26 -05:00
4f883d5971
[2.0.x] Extruder-Distinct Linear Advance K Factors ( #11789 )
2018-09-10 22:37:32 -05:00
2ebfe90be9
Add custom preheat temp to filament change ( #11475 )
2018-09-10 02:51:46 -05:00
72af8e0f02
Patch extruder_advance_K edit menu
...
Fix #11776
2018-09-09 03:21:08 -05:00
eafd62308e
Use TMC2208Stepper v0.2.5 ( #11714 )
2018-09-08 20:41:21 -05:00
beb51c2d58
Show manual extrusion moves as relative in LCD
...
- Implements FR#11724
- Old behavior can be restored by commenting out MANUAL_E_MOVES_RELATIVE
2018-09-06 02:00:25 -05:00
12fded46c2
Correct some FR strings
...
Co-Authored-By: pipersw <pipersw@users.noreply.github.com >
2018-09-04 04:00:22 -05:00
8b837dc3ad
No need for last \n in G-code items
2018-09-03 23:23:20 -05:00
d1ceaf5550
[2.0.x] Followup to IDEX changes ( #11707 )
2018-09-03 23:15:31 -05:00
7680b64aa6
IDEX clean up ( #11690 )
2018-09-02 10:18:59 -05:00
66de50f5f8
Updated slovak translation ( #11684 )
2018-08-31 15:37:49 -05:00
0966bdcbc4
Reorganized ultralcd menu (10317) ( #10360 )
...
Replaced "Prepare" and "Control" menus with "Movement", "Temperature", "Configuration" and "Advanced Settings"
2018-08-29 16:51:14 -05:00
0f14977b5d
LIGHTWEIGHT_UI: Allow feedrate % to exceed 255% ( #11656 )
...
- Changed type of integer used for feedrate percentage from uint8_t to uint16_t.
2018-08-27 21:26:32 -05:00
a15e570d3b
Fix SD progress with Lite Status Screen
...
Co-Authored-By: Lê Hoàng <icy.lord.love.angel@gmail.com >
2018-08-26 17:12:05 -05:00
acf5ae3083
!ENABLED => DISABLED
2018-08-24 16:36:37 -05:00
3671c63cde
Einsy Full Graphic LCD Fix ( #11604 )
...
Fixed issue with LCD timings for Einsy RAMBo board.
2018-08-21 23:43:52 -05:00
c2553f9888
2.0.x - Idex match119 ( #11556 )
...
* Update ubl_G29.cpp
* Update ultralcd.cpp
2018-08-15 13:26:11 -05:00
67613bf5bd
Update Czech translations ( #11510 )
2018-08-14 18:45:16 -05:00
c64199941e
Compile only selected PIO environment ( #11519 )
2018-08-14 03:28:52 -05:00
6964e1a95a
Clean up trailing whitespace
2018-08-14 00:55:37 -05:00
f891416e70
No raise on G28 after power-loss
2018-08-07 13:51:36 -05:00
f2224755ad
Fix jumping progress bar. ( #11439 )
...
- When LCD_SET_PROGRESS_MANUALLY was disabled and an SD print was not active (i.e. the printer was idle), progress_bar_percent would read uninitialized memory from stack and cause progress bar to jump wildly.
- Also updated conditions in `#ifdef` to match `ultralcd.cpp`
2018-08-03 17:17:02 -05:00
64c493ad82
MKS_12864_OLED code cleanup
2018-07-30 23:22:40 -05:00
094e6d81a5
Add Einstart-S support ( #11219 )
...
Indeed the HAL does not need to be mucked around with to expose ATmega2560 pins not available as numbers on the MEGA board, I'll need to update the wiki with that tidbit and a reference to the pin-mapping comment in `fastio_1280.h`.
2018-07-26 05:52:22 -05:00
aadcf08913
[2.0.x] add Calibrate Z (M915) to Prepare Menu ( #11331 )
2018-07-26 05:09:49 -05:00
9c2bfa2ab3
Remove extra parameter to enqueue. ( #11364 )
2018-07-25 18:02:02 -05:00
8c40f0c6c7
Reduce TQ message code size
2018-07-17 18:18:52 -05:00
b04e0c0cbb
Malyan LCD feedrate, better temp handling.
2018-07-17 18:18:52 -05:00
065e9c3d66
Add card.longest_filename method
2018-07-17 18:18:52 -05:00
8c57cadbe7
Include stdlib in fontutils ( #11251 )
...
When `REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER` is defined and Re-ARM build is attempted, `u8g_fontutf8.cpp` includes `fontutils.h` which uses `abs()`.
However, `abs()` is defined in `stdlib.h` which is not included in `fontutils.h`, so compile fails with an error.
Include `stdlib.h` in `fontutils.h` so that `abs()` is defined before `u8g_fontutf8.cpp` needs to use it, resolving the compile error.
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com >
2018-07-13 00:02:38 -05:00
20761b88e0
Merge pull request #11212 from AlexanderAmelkin/2.0-HD44780-remove-unused-include
...
[2.0.x][HD44780] Remove unused include
2018-07-08 17:19:59 -05:00
603e136e87
Resolve issue where user can't edit UBL's mesh
2018-07-08 14:41:38 -05:00
ed720194d2
[2.0.x][HD44780] Remove unused include
...
The <binary.h> header is not available in STM32 toolchain
and is not used anywhere in ultralcd_common_HD44780.h.
If it is used anywhere in HD44780 support for other platforms,
it must be included in the corresponding .cpp file directly
and put under appropriate conditional compilation directives
for the platform requiring it.
As I was unable to find such code, I consider the file unused
and hence remove the inclusion.
2018-07-06 23:45:47 -05:00
1367df2875
Replace double with float, optimize calculation
2018-07-04 22:28:56 -05:00
1a0f4dedad
Fix and improve POWER_LOSS_RECOVERY ( #11187 )
2018-07-02 23:21:28 -05:00
8299ac121d
[2.0.x] Slovak translation update ( #11175 )
2018-07-01 23:15:51 -05:00
3de0c85d41
Fix RRW graphical LCD constructor macro ( #11171 )
2018-07-01 23:14:23 -05:00
fbf1c9b496
Fix and tweak POWER_LOSS_RECOVERY ( #11151 )
2018-06-29 22:41:02 -05:00
3349eb0020
Fix SKEW_CORRECTION compile error
2018-06-29 19:38:18 -05:00
