Karl Andersson
85187290a7
Fix incorrect type on ubl_storage_slot ( #17170 )
2020-03-15 18:03:10 -05:00
Scott Lahteine
695e014075
Do later mounting of LCD-based SD
2020-03-14 19:24:35 -05:00
Scott Lahteine
090a90a036
Add EEPROM_BOOT_SILENT option
2020-03-14 19:24:35 -05:00
Scott Lahteine
095a1123c1
Add a global machine state
2020-03-14 19:24:35 -05:00
Scott Lahteine
41ffe9851d
Fix LCD progress bar
...
Fixes #17162
2020-03-14 19:24:33 -05:00
thinkyhead
5c1970a229
[cron] Bump distribution date (2020-03-15)
2020-03-15 00:04:39 +00:00
Roxy-3D
9f85165101
Allow Tool Offset adjustments to have another digit of precision
...
Some of the items in the Tool Offset Adjustment menu (in particular, the Z Offset!!!) were only adjustable with .1mm accuracy.
This is not enough. So the edit menu is switched to float52 to fix the issue.
2020-03-14 18:12:29 -05:00
Scott Lahteine
8b2d55e345
Config version 020005
2020-03-13 23:22:46 -05:00
InsanityAutomation
cee07f3f6b
Quad Z leveling, G34 (R)ecalculate ( #17122 )
2020-03-13 23:22:04 -05:00
Scott Lahteine
118bd2f8b2
Apply loop shorthand macros ( #17159 )
2020-03-13 23:18:16 -05:00
Scott Lahteine
a96be32fae
Fix G26 corrupted position
2020-03-13 19:27:02 -05:00
thinkyhead
983a8cee45
[cron] Bump distribution date (2020-03-14)
2020-03-14 00:04:00 +00:00
Scott Lahteine
6bead0c1b0
Shorter paths to HAL, ExtUI ( #17156 )
2020-03-13 16:29:29 -05:00
Scott Lahteine
ad980a72f7
M0 Q preserve status
2020-03-13 14:42:42 -05:00
Scott Lahteine
7ec45f4382
Fix end of short (auto0.g) prints
2020-03-13 13:59:17 -05:00
Scott Lahteine
81b0548518
Fix Emergency Parser stuck state
2020-03-13 13:59:17 -05:00
Erkan Colak
aa32c47fb5
Shorten German BLTouch menu item names ( #17151 )
2020-03-13 12:34:03 -05:00
nick-diel
7070ea0b49
Add OnPidTuning event to Malyan LCD ( #17143 )
...
All ExtUI LCDs need to keep up with ExtUI API changes.
2020-03-12 19:48:33 -05:00
Scott Lahteine
59cb1466b7
Fix DUGS / DGUS typo
2020-03-12 19:30:18 -05:00
Jason Smith
9c759e5f74
Fix BAUD_RATE_GCODE, etc. ( #17135 )
2020-03-12 19:26:09 -05:00
thinkyhead
8c11ecaf73
[cron] Bump distribution date (2020-03-13)
2020-03-13 00:04:16 +00:00
thinkyhead
1f55986ed2
[cron] Bump distribution date (2020-03-12)
2020-03-12 00:04:11 +00:00
Scott Lahteine
318a16637b
Fix M810 macro multiple use
...
Fixes #17125
2020-03-11 17:15:39 -05:00
BigTreeTech
8bad6e11e2
Fix STM32 _WRITE macro parameter ( #17121 )
2020-03-11 16:42:28 -05:00
Scott Lahteine
112245ee48
More explicit EEPROM types ( #17127 )
2020-03-11 16:41:18 -05:00
Scott Lahteine
924fa6045c
Non-const REMEMBER needed for RESTORE
2020-03-11 15:25:16 -05:00
Daniel Kreuzhofer (@danieldotnet)
f29d6f802f
Revert Anet 1.x envs change ( #17120 )
2020-03-11 15:08:47 -05:00
George Fu
201c991cfa
Fix and update DGUS displays ( #17072 )
2020-03-11 03:40:30 -05:00
Jamie
23c5701178
Apply soft limits to joystick jogging ( #17114 )
2020-03-10 22:59:49 -05:00
Scott Lahteine
eb6c992bfb
Announce SD file open
...
Requested in #17110
2020-03-10 22:54:19 -05:00
Gurmeet Athwal
bd44f041e8
M220 print FR percentage ( #17101 )
2020-03-10 20:13:59 -05:00
Daniel Kreuzhofer (@danieldotnet)
d78fbce827
Fix pio environments for Anet 1.x ( #17109 )
2020-03-10 20:04:44 -05:00
jufimu12
627aa8db2d
Fix G34, add HOME_AFTER_G34 option ( #17108 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-03-10 20:00:26 -05:00
Scott Lahteine
e7004550c4
Tweaks to finishSDPrinting ( #17082 )
2020-03-10 19:42:57 -05:00
thinkyhead
a31b7339cd
[cron] Bump distribution date (2020-03-11)
2020-03-11 00:04:19 +00:00
Scott Lahteine
4e3a793f1e
Fix broken enqueue_P
2020-03-10 18:28:49 -05:00
Scott Lahteine
9bff67bc74
Always look for PLR file, but more quickly
2020-03-10 17:07:14 -05:00
Vert
8bbcbc528c
Fix Z4 stepper indirection macros ( #17107 )
2020-03-10 15:57:10 -05:00
Scott Lahteine
8f66dbfcd5
SD_DETECT_INVERTED => SD_DETECT_STATE ( #17112 )
2020-03-10 15:43:06 -05:00
thinkyhead
8799f8bfdb
[cron] Bump distribution date (2020-03-10)
2020-03-10 00:04:08 +00:00
Scott Lahteine
972d1bf5b4
Ensure welcome message
2020-03-09 18:19:37 -05:00
Scott Lahteine
b5530775c9
Add debug logging for setup()
2020-03-09 17:46:49 -05:00
Scott Lahteine
13118dbd8d
Additional numtostr functions
2020-03-09 17:46:49 -05:00
Scott Lahteine
0f39386d9b
Make BOOTSCREEN_TIMEOUT generally available
2020-03-09 17:46:49 -05:00
Scott Lahteine
7674befa47
DOGM SPI delay is less common
2020-03-09 17:46:49 -05:00
Scott Lahteine
b579f5dc99
Move 'last_pause_state' closer to usage
2020-03-09 17:46:49 -05:00
thinkyhead
7f490c08da
[cron] Bump distribution date (2020-03-09)
2020-03-09 00:04:03 +00:00
Scott Lahteine
982197b162
Fixes for Z4 axis, CS pins ( #17097 )
2020-03-08 16:31:37 -05:00
MangaValk
57f488738b
[ToolChanger] Lock the current tool at power-up ( #17093 )
2020-03-08 16:13:41 -05:00
Scott Lahteine
b21edce943
More general SD_DETECT_INVERTED override
2020-03-08 14:47:16 -05:00
Scott Lahteine
2a71e4f336
Revert that wack backoff
2020-03-07 23:10:56 -06:00
Scott Lahteine
64d092935b
More useful ENABLED / DISABLED macros ( #17054 )
2020-03-07 22:20:41 -06:00
thinkyhead
5eb6fb1c2f
[cron] Bump distribution date (2020-03-08)
2020-03-08 00:04:21 +00:00
Scott Lahteine
20f93404a7
Add / correct comments
2020-03-07 02:16:17 -06:00
Scott Lahteine
3db784f3c7
More pins debugging cleanup
2020-03-07 02:15:05 -06:00
Scott Lahteine
7b9eb233cb
Emergency Parser dumb terminal compatibility
2020-03-07 02:15:05 -06:00
Scott Lahteine
c99773bae0
Max7219 suspend/resume
2020-03-07 01:18:26 -06:00
Scott Lahteine
8ff25a9566
Max7219 init last
2020-03-07 00:16:44 -06:00
Scott Lahteine
e9f451bffe
Pins debug followup
2020-03-06 21:59:20 -06:00
thinkyhead
3b14158979
[cron] Bump distribution date (2020-03-07)
2020-03-07 00:04:33 +00:00
Scott Lahteine
913de024a9
Change PID dummy value to NAN
...
Fixes #17078
2020-03-06 13:55:27 -06:00
Scott Lahteine
1da49d0ac5
Non-blocking Max7219 test pattern
2020-03-06 13:19:38 -06:00
Scott Lahteine
ca4423ed2a
Clean up pins debugging
2020-03-06 13:14:22 -06:00
Scott Lahteine
6cd99e6a77
Add pins to the pins debug list
2020-03-06 13:14:22 -06:00
Scott Lahteine
6d18f715e4
Fix M0/M1 message string
2020-03-06 13:14:22 -06:00
thinkyhead
459a0dae29
[cron] Bump distribution date (2020-03-06)
2020-03-06 00:04:16 +00:00
Scott Lahteine
3a72b0fd41
Update Chinese (TW) language ( #17071 )
2020-03-05 15:39:49 -06:00
Scott Lahteine
f0248c9ed9
Update Turkish language ( #17070 )
2020-03-05 15:37:02 -06:00
Scott Lahteine
c0801e900d
Define Z_MIN_PROBE_PIN for Cohesion 3D Remix
2020-03-05 15:10:46 -06:00
Scott Lahteine
e3da86fb45
Fix SKR test for ONBOARD SD
2020-03-05 13:37:09 -06:00
Scott Lahteine
0578e9b16e
Move SENSORLESS_PROBING to the probes section
...
Fixes a bug with HAS_BED_PROBE not being set before use.
2020-03-05 11:05:11 -06:00
thinkyhead
7e58739a1f
[cron] Bump distribution date (2020-03-05)
2020-03-05 00:04:13 +00:00
Scott Lahteine
631addbbb4
SAMD51 SoftwareSerial ( #17041 )
2020-03-04 13:15:32 -06:00
Scott Lahteine
d4ac78535c
Allow Z_STOP_PIN override on SKR 1.4 ( #17063 )
2020-03-04 13:12:48 -06:00
Scott Lahteine
70863fbd55
Avoid name conflict with 'UART'
2020-03-04 12:50:58 -06:00
Scott Lahteine
7709261ea9
Move shared code to wait_for_bed_heating
2020-03-04 12:50:57 -06:00
thinkyhead
ab1863ac48
[cron] Bump distribution date (2020-03-04)
2020-03-04 00:04:06 +00:00
Scott Lahteine
72b63e9520
Fix TEMP_PROBE_PIN for SKR 1.4
...
Co-Authored-By: Anthrix <anthrix@users.noreply.github.com>
2020-03-03 14:53:22 -06:00
George Fu
a698bfdc2a
Update FYSETC S6 pins/variants ( #17056 )
2020-03-03 14:30:09 -06:00
thisiskeithb
efc739a880
Use BED_MAXTEMP for PTC_MAX_BED_TEMP ( #17061 )
2020-03-03 14:22:28 -06:00
Scott Lahteine
83a60f15ff
Fix EEPROM compile errors
2020-03-03 14:21:07 -06:00
Scott Lahteine
c083728e4c
General code cleanup
2020-03-03 14:20:37 -06:00
Scott Lahteine
5e28b0f471
Minor EEPROM cleanup
2020-03-02 21:56:21 -06:00
Scott Lahteine
3a07b4412d
Asynchronous M114 and (R)ealtime position option ( #17032 )
2020-03-02 21:52:53 -06:00
Scott Lahteine
5171e9da93
No more direct G28 calls
2020-03-02 21:01:58 -06:00
thinkyhead
12d05e4835
[cron] Bump distribution date (2020-03-03)
2020-03-03 00:04:10 +00:00
Scott Lahteine
07e22d1d65
Neopixel on LPC uses GPIO toggling
2020-03-02 17:20:01 -06:00
Scott Lahteine
646599d0d9
Finish M900 updates
2020-03-02 17:10:51 -06:00
Scott Lahteine
eb4d5120bf
Keep name around for old configs
2020-03-02 16:23:17 -06:00
InsanityAutomation
552f7a91d0
Default on/off for Power Loss Recovery ( #17051 )
2020-03-02 16:07:53 -06:00
jufimu12
ad4a9eb73a
Fix G34 probing range/error bug ( #17052 )
2020-03-02 13:35:02 -06:00
Scott Lahteine
5aa528781f
Fix ambiguous type
...
Co-Authored-By: Andrew Kroll <xxxajk@gmail.com>
2020-03-02 13:23:07 -06:00
ellensp
af23c0480e
Don't define 'valptr' if unused ( #17048 )
2020-03-02 13:17:52 -06:00
ellensp
624ab24a5c
Suppress thisItemNr warning ( #17049 )
2020-03-02 13:14:08 -06:00
Jason Smith
66334820ca
Add TMC micro-steps sanity check ( #17044 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-03-02 13:13:04 -06:00
Scott Lahteine
2c4e054e9a
Fix fastio pin comment
2020-03-02 13:11:30 -06:00
Scott Lahteine
49c5f614c6
Minor motion style changes
2020-03-02 12:54:18 -06:00
Scott Lahteine
6b5347ee39
Improved M900
2020-03-02 12:05:00 -06:00
Scott Lahteine
b1a50d54e2
HAS_TRINAMIC => HAS_TRINAMIC_CONFIG
2020-03-02 12:04:36 -06:00
Scott Lahteine
736521a3f1
Balance mega tests, shorten some env names
2020-03-01 21:20:22 -06:00
Scott Lahteine
870a1f753a
Fix undefined STATUS_CHAMBER_WIDTH
2020-03-01 21:19:50 -06:00
Jason Smith
cc822bf70f
Fix some 8 extruders issues, GTR build ( #17043 )
2020-03-01 21:19:02 -06:00
Jason Smith
5da6819277
Fix build issues with REPRAPWORLD_KEYPAD ( #17038 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-03-01 19:54:22 -06:00
Scott Lahteine
362c9ae79a
Clean up use of extra_xyjerk
2020-03-01 19:23:48 -06:00
thinkyhead
ac93df43cd
[cron] Bump distribution date (2020-03-02)
2020-03-02 00:04:18 +00:00
ellensp
4b256a6fa8
Revert FYSETC Mini encoder change ( #17040 )
...
Reverting #17010
2020-03-01 17:59:00 -06:00
Jason Smith
4a3fcd0bf9
Fix three extruder with auto-fan build ( #17035 )
2020-03-01 17:37:16 -06:00
Scott Lahteine
edd1b76a9a
Fix set_current_from_steppers_for_axis(E_AXIS) bug
2020-03-01 14:36:21 -06:00
Scott Lahteine
c4db8e49a7
XYZ_CHAR macro
2020-03-01 14:36:06 -06:00
Scott Lahteine
3473b21710
Move millis_t includes
2020-03-01 09:50:53 -06:00
Scott Lahteine
5e9a10dbae
Use PSTR for common labels
2020-03-01 08:39:47 -06:00
thinkyhead
1d609d2bbd
[cron] Bump distribution date (2020-03-01)
2020-03-01 00:04:02 +00:00
Vert
6c9ca1bec2
Clarify GT2560 common pins ( #17021 )
2020-02-29 04:35:10 -06:00
Scott Lahteine
730804289c
Catch more LPC1768 pin conflicts ( #17019 )
2020-02-29 04:14:40 -06:00
ManuelMcLure
39c34e4992
Use ADC resolution in AD595/8495 calculation ( #17018 )
...
Fixes thermocouple reading on LP1768 (which uses 12-bit resolution).
2020-02-28 23:28:17 -06:00
thinkyhead
b946530ef6
[cron] Bump distribution date (2020-02-29)
2020-02-29 00:03:54 +00:00
ellensp
9b145c7c73
Reverse encoder for FYSETC Mini 12864 2.1 + SKR 1.3 ( #17010 )
2020-02-28 12:26:54 -06:00
jufimu12
ac755fce82
Fix G34 "Decreasing accuracy" bug ( #17013 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-02-28 11:42:51 -06:00
Scott Lahteine
97e87d8262
Fix G76 reachable test ( #17005 )
2020-02-27 22:47:44 -06:00
Anders Sahlman
c669420134
Pass along sanity_check for (G33) probing ( #17006 )
2020-02-27 19:58:35 -06:00
thinkyhead
f8497b8171
[cron] Bump distribution date (2020-02-28)
2020-02-28 00:03:53 +00:00
Scott Lahteine
bfbd976c09
General G76 cleanup
2020-02-27 07:53:24 -06:00
Scott Lahteine
a75a25cd7c
Replace direct call to G28(true)
2020-02-27 07:48:34 -06:00
Scott Lahteine
4f55723527
RUMBA has 3 E plugs
2020-02-27 07:48:02 -06:00
Scott Lahteine
77b82d300a
Add idle_no_sleep
2020-02-27 06:45:33 -06:00
Scott Lahteine
e5d39063a2
Cleanups for PTC
2020-02-27 06:45:23 -06:00
Scott Lahteine
be62ab2d02
Move reachable test to Probe class
2020-02-27 06:16:33 -06:00
Roman Moravčík
9f8ee31144
Update Slovak language ( #17002 )
2020-02-27 03:38:46 -06:00
Makoto Schoppert
8164cac797
Fix planner.cpp compile ( #16996 )
2020-02-27 03:29:44 -06:00
thinkyhead
a80eda41bc
[cron] Bump distribution date (2020-02-27)
2020-02-27 00:03:42 +00:00
Scott Lahteine
bafe8d920a
Handle print completed LED event in M0
2020-02-26 12:02:54 -06:00
Scott Lahteine
633b716a3a
Define DIAG pins for MKS SGen-L
2020-02-26 11:35:07 -06:00
Scott Lahteine
832951ec44
Case-insensitive g-code option ( #16932 )
2020-02-26 09:23:55 -06:00
Scott Lahteine
18b875dc9f
Allow print recovery after parking
2020-02-26 08:16:46 -06:00
Scott Lahteine
6fd7f4fe1b
Fix unified status bed temp display
2020-02-26 08:09:57 -06:00
Scott Lahteine
263a7beeb5
More extra travel jerk changes
...
Co-Authored-By: josedpedroso <josedpedroso@users.noreply.github.com>
2020-02-26 07:24:36 -06:00
Scott Lahteine
6913a4dfa8
Prevent park_point compile error
2020-02-26 07:10:35 -06:00
Scott Lahteine
025c50cc6d
Quick-homing sensorless back-off ( #16872 )
2020-02-26 06:50:13 -06:00
Scott Lahteine
02cce7d4b4
Add TRAVEL_EXTRA_XYJERK option
...
See #16949
Co-Authored-By: josedpedroso <josedpedroso@users.noreply.github.com>
2020-02-26 06:43:07 -06:00
Scott Lahteine
0a7e7a6fa5
Allow servo features in combination ( #16960 )
2020-02-26 06:26:54 -06:00
Scott Lahteine
daa32013b1
Sanity check for LPC serial pin conflict ( #16981 )
2020-02-26 06:26:30 -06:00
Scott Lahteine
ec1b86d9cb
Serial strings in macros
2020-02-26 05:38:33 -06:00
Scott Lahteine
cf597e2bb1
Allow weird probe values in G33
2020-02-26 05:33:57 -06:00
ellensp
e76f2ed4cb
Fix Trinamic pulse rate auto-assignment ( #16966 )
2020-02-26 04:34:21 -06:00
Scott Lahteine
b5c2190b38
String optimize followup
2020-02-26 04:32:40 -06:00
InsanityAutomation
28008aced0
Correct SKR expansion port pins ( #16974 )
2020-02-26 04:18:34 -06:00
ellensp
70af080813
Add LPC1768 Serial ports for pinsDebug ( #16980 )
2020-02-26 04:12:53 -06:00
Scott Lahteine
5ebba4b19f
More serial strings
2020-02-26 04:11:12 -06:00
InsanityAutomation
cdcd45d651
Set LCD status for EEPROM errors ( #16977 )
2020-02-26 03:04:02 -06:00
Scott Lahteine
e78f607ef3
Use a STR_ prefix for non-translated strings
2020-02-26 03:02:03 -06:00
