bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
9,890 Commits 1 Branch 4 Tags 151 MiB
e74a5829c7
Commit Graph

1260 Commits

Author SHA1 Message Date
Bob-the-Kuhn
2d749d490b Fix / complete USE_CONTROLLER_FAN (#9666) 2018-02-16 02:18:50 -06:00
Scott Lahteine
08d685c97a Followup to 21e60fd 2018-02-16 02:09:17 -06:00
Scott Lahteine
c49844df66 !ENABLED => DISABLED 2018-02-16 01:51:34 -06:00
Scott Lahteine
304e0f8945 Followup to 21e60fd 
`ENABLED` only works for flag-type options. Floats must use `#ifdef`.
 2018-02-15 22:24:23 -06:00
Scott Lahteine
6a70a4fbb3
Fix G26 circles (#9627) 
Easier to configure. Catch an odd divisor.
 2018-02-15 22:11:26 -06:00
Bob-the-Kuhn
349dafa728 config update (set to -1) 2018-02-15 21:42:54 -06:00
Roxy-3D
21e60fd3ed
Allow user to control Z-Height correction for off mesh movements (#9661) 2018-02-15 15:07:42 -06:00
Petr Zahradník
5d9e16ea49 Update Czech advanced pause 2018-02-15 20:22:22 +01:00
Roxy-3D
c78e1c0f23
Fix G26 Circles... (#9641) 
* Fix G26 Circles...
 2018-02-15 11:15:15 -06:00
Bob-the-Kuhn
b648999528
Merge pull request #9624 from Bob-the-Kuhn/RRD-8-bit-code-to-2.0.x 
[2.0.x] Add delays to AVR driver for RRD Full Graphic Smart Controller
 2018-02-14 22:43:17 -06:00
Marcio Teixeira
8db67d1647 Fixed compilation when using avr-gcc 
- avr-gcc is more strict than the Arduino IDE, it seems.
 2018-02-14 15:51:25 -07:00
Marcio Teixeira
f05bd7f082 Added files missing from earlier commit. 2018-02-14 14:51:35 -07:00
Marcio Teixeira
4880ac6533 Added a light-weight status screen for the ST7920 
- The status screen uses the ST7920 character generator to greatly
  reduce SPI traffic and MCU load when updating the status screen.

- Has been tested with the RepRapDiscount Full Graphics Smart Controller
  but should work with any LCD that uses an ST7920 or fully compatible
  controller.
 2018-02-14 14:43:54 -07:00
Roxy-3D
3d74ff3c87
Cartesian UBL systems should not use SEGMENT_LEVELED_MOVES 
There is significant downside to breaking up the long line segments on UBL Cartesian machines.   It adds a lot of extra computation but worse...  It cuts out all of UBL's off mesh Z-Height correction checks.    There have been a large number of people complaining about the nozzle going to infinity or crashing into the bed lately.   They are being caused by
```
void unified_bed_leveling::line_to_destination_cartesian()
```
not watching over the segments being queued up for movement.
 2018-02-14 14:16:12 -06:00
Scott Lahteine
5dc04c5201 Fix #9361 2018-02-14 07:48:20 -06:00
AnHardt
133b38b93b Complete M48 description (#9631) 2018-02-14 05:17:58 -06:00
Scott Lahteine
93c0198b2d Init LCD welcome message programmatically 2018-02-14 05:09:44 -06:00
Scott Lahteine
67a4cc610b French update 
Based on #9610
 2018-02-14 04:15:47 -06:00
Scott Lahteine
e7b50c89b0 Fix #9201 
FILAMENT_LCD_DISPLAY can work with SDSUPPORT
 2018-02-14 03:29:47 -06:00
Scott Lahteine
8d71ad37cb flush comment to match 1.1.x 2018-02-14 02:56:18 -06:00
Scott Lahteine
272f132b82 Remove stray ` from STM32F1 HAL 
As noted in #8585
 2018-02-14 01:06:37 -06:00
Scott Lahteine
5b70d3da1c Update DIGIPOT_I2C_MOTOR_CURRENTS comments 2018-02-13 22:54:12 -06:00
Scott Lahteine
2ec65051fd Fix serial comment sp. 2018-02-13 22:40:56 -06:00
Bob-the-Kuhn
9a423e9a89 tested 2018-02-13 21:59:18 -06:00
Scott Lahteine
d741bcf8a9 Tweak boards spacing 2018-02-13 03:49:28 -06:00
Scott Lahteine
f8912bb19f French update 
Based on #9590 by @studiodyne
 2018-02-12 01:07:47 -06:00
Scott Lahteine
e6b8207b03 Restore welcome message 2018-02-12 01:02:30 -06:00
Scott Lahteine
89165326b4 Cleanup after vim and vigor 2018-02-11 06:07:30 -06:00
Scott Lahteine
423bf9955e Set Megatronics baud rate to 115200 
Fix #9092
 2018-02-11 03:43:36 -06:00
Scott Lahteine
377108619b Fix plan_arc clockwise (G2) 
Fix #9482
 2018-02-11 03:34:25 -06:00
Scott Lahteine
378867d894 Update PB Rev.F pins 2018-02-11 01:45:37 -06:00
Scott Lahteine
8e0c107545
Have Kossel Pro use Z_MIN_PROBE_ENDSTOP (#9586) 2018-02-11 01:41:40 -06:00
Scott Lahteine
03d790451f
[2.0.x] HAL timer set/get count => set/get compare (#9581) 
To reduce confusion over the current timer count vs. the compare (aka "top") value. Caution: this re-uses the function name, changing its meaning.
 2018-02-10 20:42:00 -06:00
Scott Lahteine
7a4029d1b1 Correct MOTHERBOARD for Geeetech i3 Pro X 2018-02-10 20:29:29 -06:00
Scott Lahteine
451fb16f9b Fix CYCLES_PER_MICROSECOND conflict 2018-02-10 20:08:48 -06:00
Scott Lahteine
3e384b60ce
Malyan M200 fix E0_AUTO_FAN_PIN (#9580) 
Fixes #8794
 2018-02-10 20:04:09 -06:00
Scott Lahteine
33752de12d Update some outdated configs 2018-02-10 19:48:16 -06:00
Scott Lahteine
38c7d53bf7 Repair some spacing 2018-02-10 19:33:26 -06:00
Scott Lahteine
e3043d7ac7 Fix #8744 2018-02-10 16:54:42 -06:00
Scott Lahteine
d3ddd5ffaa
Merge pull request #9576 from thinkyhead/bf2_more_tests 
[2.0.x] Fix Power class
 2018-02-10 16:43:55 -06:00
Scott Lahteine
7280fa1e31 Patch Power class 2018-02-10 15:41:18 -06:00
Scott Lahteine
4aff6c1c32 Tronxy X5S pins and configuration 2018-02-10 15:07:04 -06:00
Scott Lahteine
05aa75cecf Melzi boards use melzi pins 2018-02-10 14:44:14 -06:00
gege2b
5785bbb491 Updated french translation (#9556) 2018-02-10 14:15:41 -06:00
GMagician
299606e4ae [2.0.x] Memory overflow protection (#9562) 2018-02-10 14:14:34 -06:00
teemuatlut
5990266724 Init CS pins before loading settings (#9566) 2018-02-10 14:08:53 -06:00
teemuatlut
d3fdb44ad8 Update TMC section with SW SPI pins (#9554) 2018-02-09 22:54:34 -06:00
Scott Lahteine
3168f0e646
Merge pull request #9549 from thinkyhead/bf2_prevent_comments_resetting 
[2.0.x] Prevent watchdog reset due to many comments
 2018-02-09 07:13:26 -06:00
Scott Lahteine
9be6aa3f79
Merge pull request #9544 from thinkyhead/bf2_reliable_probe_heaters_off 
[2.0.x] More reliable PROBING_HEATERS_OFF with BED_LIMIT_SWITCHING
 2018-02-09 07:12:29 -06:00
Scott Lahteine
c0dd9ef9f2
Support for AnyCubic TriGorilla board (#9551) 2018-02-09 05:41:52 -06:00
Scott Lahteine
da693a636e Fix handling of escapes in serial input 2018-02-09 05:19:33 -06:00
Scott Lahteine
cc9cef7f7a Fix HAS_CONTROLLER_FAN in is_power_needed 2018-02-09 05:19:33 -06:00
Scott Lahteine
112917cfef No EXTRUDER_RUNOUT_PREVENT during print 2018-02-09 05:19:33 -06:00
Scott Lahteine
c30a8067ab Prevent watchdog reset due to many comments 
Addressing #7449
 2018-02-09 05:19:33 -06:00
Scott Lahteine
b7053156fe Minor comment/condition cleanup 2018-02-09 01:53:35 -06:00
Scott Lahteine
f64d300cfd
Sanity check SERIAL_PORT 
Addressing #7400
 2018-02-09 00:44:15 -06:00
Scott Lahteine
5a70887467
Size lcd_status_message based on language (#9545) 2018-02-08 23:03:47 -06:00
Scott Lahteine
545cd8fa60 Tweak malyanlcd.cpp 2018-02-08 22:00:23 -06:00
Scott Lahteine
e698998343 More reliable PROBING_HEATERS_OFF with BED_LIMIT_SWITCHING 2018-02-08 21:10:11 -06:00
shaktee
27faeafc1b [2.0.x] BIBO Cyclops (#9541) 2018-02-08 21:01:31 -06:00
Scott Lahteine
2014d38e10 NEOPIXEL_BRIGHTNESS parity 2018-02-08 18:55:19 -06:00
Scott Lahteine
694d2ebec0 TMC SW SPI pins in Configuration_adv.h 
Counterpart to #9632
 2018-02-08 18:49:38 -06:00
GMagician
9854262334 [2.0.x] Fix compile warning (#9539) 2018-02-08 17:59:03 -06:00
Scott Lahteine
b639f1ad4b
Correct some retract() comments 2018-02-08 17:57:48 -06:00
Thomas Moore
1541224a81 Enable Z axis and delta sensorless homing (#9516) 2018-02-08 04:20:44 -06:00
Scott Lahteine
b2f8b4ada5
I2C position encoders update (#9533) 
Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.
 2018-02-08 03:57:11 -06:00
Thomas Moore
93af0365e8 [2.0.x] Add support for Cohesion3D ReMix and Mini (#9512) 
* Add support for Cohesion3D ReMix and Mini
* Two separate pins files for pedantic reasons
 2018-02-08 03:14:39 -06:00
Scott Lahteine
23240f7986 Fix sw serial pins for TMC2208 
From #9518 by @melvinisken
 2018-02-08 02:54:49 -06:00
Scott Lahteine
d42a87cb31 Update language Italian 
From #9508 by @tnw513
 2018-02-08 02:10:15 -06:00
Scott Lahteine
2538f019d0 Update language Basque-Euskera 
From #9514 by @1138-4EB
 2018-02-08 02:08:41 -06:00
Scott Lahteine
d168ee9bed Drop leveling include from steppers.cpp 2018-02-08 01:32:19 -06:00
Scott Lahteine
09c8807a36 Minor formatting in queue.cpp 2018-02-08 01:31:19 -06:00
Scott Lahteine
704d33c374 Special override of LCD_WIDTH 2018-02-08 01:30:56 -06:00
Scott Lahteine
b3f115fa0a
Marlin.ino needs no content (#9506) 2018-02-06 02:28:18 -06:00
Scott Lahteine
ca8fdff1af Comment G26 properly 2018-02-06 00:58:28 -06:00
Scott Lahteine
8558264514
Configs for Prusa i3 Pro B GT2560 Rev.A Plus (#9505) 
One without probe and one with BLTOUCH.
 2018-02-06 00:24:21 -06:00
Scott Lahteine
b5e92f4f90
[2.0.x] Enable / disable PSU automatically (#9503) 2018-02-06 00:22:30 -06:00
Scott Lahteine
eecb0188c0 Add ULTI_CONTROLLER to example configs 2018-02-05 22:30:03 -06:00
Scott Lahteine
16739264d3 Add UltiController v2.1 support 
Add compatibility with the original screen bord from Ultimaker 2 printer (UltiController v2.1 with the PG-2864ALBP I2C display)
 2018-02-05 22:30:03 -06:00
Scott Lahteine
a8c4174a13 M100 comment 2018-02-05 21:54:50 -06:00
Scott Lahteine
38d62494ef Adjustment to DOG_CHAR_*_EDIT 2018-02-05 20:25:45 -06:00
Scott Lahteine
8a6feab1c4 Num-to-string functions for DEBUG_LEVELING_FEATURE 2018-02-05 19:08:27 -06:00
Scott Lahteine
766faa05a9
sp 2018-02-05 15:57:29 -06:00
GMagician
f27c89980a [2.0.x] Simplify bltouch configuration (#9488) 2018-02-05 14:38:09 -06:00
GMagician
338dac258b [2.0.x] Fix compiler error when G26 is enabled (#9492) 2018-02-05 14:27:39 -06:00
Scott Lahteine
4ddb6a3a1f
Merge pull request #9470 from thinkyhead/bf2_malyan_clueless 
[2.0.x] Malyan M200 LCD
 2018-02-05 05:03:18 -06:00
Scott Lahteine
03bfc0d7c8
Merge pull request #9439 from thinkyhead/bf2_fix_G26_circle_bumps 
[2.0.x] Change G26 circle angles
 2018-02-04 19:05:18 -06:00
Scott Lahteine
e5ee0b6f6c Implement MALYAN_LCD 2018-02-04 18:52:44 -06:00
Scott Lahteine
b939a2e88c Watchdog conditional for LPC 2018-02-04 18:52:44 -06:00
Scott Lahteine
4925f60cff Add MALYAN_LCD to configs 2018-02-04 18:52:44 -06:00
Scott Lahteine
3a1225e438 Sanity check SENSORLESS_HOMING 2018-02-04 18:52:44 -06:00
Scott Lahteine
2ea4e74ed3 Misc. comments 2018-02-04 17:40:39 -06:00
Scott Lahteine
aecf0c9bb9 Allow override of CS pins generally 2018-02-04 16:36:30 -06:00
Scott Lahteine
0891b58c30 #ifdef tweaks 2018-02-04 16:36:30 -06:00
Bob-the-Kuhn
428f164d02 [2.0.x] Bug fix - "M114 D" and Due (dtostrf C linkage) (#9481) 2018-02-04 16:11:27 -06:00
Scott Lahteine
693843f1fa
Allow override of RAMPS CS Pins (#9472) 2018-02-04 16:00:16 -06:00
ABH10
ac6bf7226a Update of comments in thermistor files. No functional changes. (#8986) 2018-02-04 06:06:21 -06:00
Alexey Shvetsov
da3a0d619c Add Selena Compact board (#9407) 
5-axis, high performance, powerful board with Smoothieware opensource firmware. Designed for 3D printer, Laser cutter or CNC mill. Five changed independent drivers on board. Two extruders 3d printer support.
 2018-02-04 03:15:09 -06:00
Thomas Moore
786746404b [2.0.x] Apply feedrate to nozzle movement for kinematic machines (#8778) 2018-02-04 00:26:05 -06:00
Scott Lahteine
5364b92c37 Drop obsolete string 2018-02-03 23:58:31 -06:00
shaktee
34624cf399 [2.0.x] BIBO TouchX configuration (#9469) 2018-02-03 23:21:02 -06:00
Bob-the-Kuhn
3d72fe0730 snapshot 2018-02-03 21:28:05 -06:00
Scott Lahteine
33ec599ca0 Tweaky LPC1768 SPI spacing/style 2018-02-03 20:25:57 -06:00
Scott Lahteine
c46de340b7 Clean up trailing whitespace 2018-02-03 20:05:23 -06:00
Thomas Moore
e1fd9c08b3 [2.0.x] Add support for LPC1769 at 120 MHz (#9423) 2018-02-03 19:33:26 -06:00
GMagician
6ace57e1b0 [2.0.x] remove duplicated include (#9445) 
This was present in #9357 but lost
 2018-02-03 19:32:05 -06:00
GMagician
9e13d1fad5 [2.0.x] Fix temperature out of LCD (#9461) 
Fix bug introduced in #9415
 2018-02-03 19:25:04 -06:00
Scott Lahteine
e6cdc438fd Change G26 circle angles 
To prevent the nozzle from colliding with the printed pattern.
 2018-02-03 19:17:49 -06:00
Scott Lahteine
a8764ac5d5 G26 parity with 1.1.x 2018-02-02 05:19:14 -06:00
Manuel Valentino
374f2a5e16 [2.0.x] Fixed wrong information about TMC2208 wiring (#9335) 2018-02-02 04:45:55 -06:00
Bob-the-Kuhn
a0570ff1eb Fix caselight on Due (#9364) 2018-02-02 04:13:33 -06:00
Scott Lahteine
b13099de3f General cleanup of HAL code 2018-02-02 03:37:15 -06:00
Scott Lahteine
9b9350e010 Fix jerky Z motion between probes 
Suggested by #9375
 2018-02-02 02:32:11 -06:00
Scott Lahteine
d6e29e9597 Update French language 
Based on #9373 by @nikkoura
 2018-02-02 01:56:25 -06:00
GMagician
e1117a8492 [2.0.x] fix compile errors when CNC_COORDINATE_SYSTEMS is enabled (#9380) 2018-02-02 01:45:46 -06:00
GMagician
ea9ad4e46d [2.0.x] Fix compile error on delta when NO_WORKSPACE_OFFSETS (#9388) 2018-02-02 01:44:48 -06:00
Scott Lahteine
79796b22ad Fix up _Bootscreen.h and _Statusscreen.h 2018-02-02 00:57:16 -06:00
Bob-the-Kuhn
21179f8300 Fix the "slow" version of the G-code parser 2018-02-02 00:35:58 -06:00
Scott Lahteine
c251601916 Simplified SET_BIT, moved to endstops.cpp 2018-02-02 00:34:23 -06:00
Scott Lahteine
eb18ae9003 Define LSBFIRST / MSBFIRST for LPC 2018-02-02 00:34:23 -06:00
Scott Lahteine
f8227abf1c
Merge pull request #9384 from tcm0116/2.0.x-retract 
[2.0.x] Clear retracted status when homing the Z axis
 2018-02-01 23:36:36 -06:00
Scott Lahteine
ea5f91737f
Merge pull request #9392 from studiodyne/studiodyne-pause 
[2.0.x] Pause resuming fix
 2018-02-01 23:32:24 -06:00
teemuatlut
5c69d45f5b [2.0.x] TMC2130 support for LPC platform (#9114) 2018-02-01 21:49:40 -06:00
Scott Lahteine
34160806c0 Fix broken G29 W I J 2018-02-01 21:37:35 -06:00
Scott Lahteine
f5cfdf6efe Use _BV32 to avoid name conflict 2018-02-01 21:37:35 -06:00
Scott Lahteine
6339b506c0 Make sure binary.h is included as needed 2018-02-01 21:37:35 -06:00
studiodyne
51d080d2c1
Update Pause 2018-01-29 21:57:37 +01:00
Thomas Moore
7035471982 Clear retracted status when homing the Z axis 2018-01-29 19:40:04 +00:00
GMagician
6d4bc9a1f8 [2.0.x] Fix SD wrong filename list (#9342) 
If last file in directory has short filename and is preceded by a deleted long file name. SD menu will wrongly report long deleted file name as last entry
 2018-01-26 14:03:51 -06:00
Bob-the-Kuhn
c6e01ebd52 never mind ... 2018-01-25 22:13:32 -06:00
Bob-the-Kuhn
ab709ccac1 add USEABLE_HARDWARE_PWM & clear up some compiler warnings 2018-01-24 21:42:36 -06:00
Scott Lahteine
fc5c1a28d8 Fix M118 parameter parsing 2018-01-24 00:30:13 -06:00
Scott Lahteine
399bca316a Fix has_value with FASTER_GCODE_PARSER 2018-01-24 00:30:13 -06:00
Scott Lahteine
80d3ded895 Change parser codebits from array to int32_t 2018-01-24 00:30:13 -06:00
Scott Lahteine
053b1371c7 Simplify G-code debug option 2018-01-24 00:06:07 -06:00
Scott Lahteine
608f8b10da Parser val method parity with 1.1.x 2018-01-24 00:06:07 -06:00
Scott Lahteine
2bea1bda56 Move more strings to PROGMEM 2018-01-24 00:06:06 -06:00
Scott Lahteine
58671e1bc1 Marlin must override _BV for 32-bit masks! 2018-01-23 23:52:35 -06:00
Scott Lahteine
45cfb16424
Merge pull request #8355 from tcm0116/2.0.x-TwoWire 
[2.0.x] Master-only TwoWire (I2C) class for LPC1768
 2018-01-23 20:14:02 -06:00
Scott Lahteine
1dcfe193ac Optimize some serial strings 2018-01-23 19:14:00 -06:00
Scott Lahteine
9644fe1839 Lightly optimize arc length calculation 2018-01-23 19:13:59 -06:00
Scott Lahteine
c9bda932fe
Patch M114 D logical output 2018-01-23 18:50:37 -06:00
Scott Lahteine
e5ca60acf5 Patch G29 no_action for A and Q 2018-01-23 14:00:06 -06:00
Scott Lahteine
696f8eb4c6 Include Z Fade in log_machine_info 2018-01-23 14:00:06 -06:00
Scott Lahteine
3217da6fa5 Followup patch for TMC stepper init 2018-01-23 14:00:06 -06:00
Scott Lahteine
db031d5d76 Add missing SoftwareSerial begin for TMC2208 
Based on #9299
 2018-01-22 10:43:24 -06:00
Thomas Moore
3db35ba9be [2.0.x] Fix change filament for delta machines (#9295) 2018-01-22 10:21:42 -06:00
Scott Lahteine
2ebf52e57d Fix Skew Correction pre-calculation overflow error 2018-01-22 08:20:21 -06:00
Scott Lahteine
adb2ac4747 Fix skew settings report precision 2018-01-22 08:09:36 -06:00
Scott Lahteine
205c5fa078
Merge pull request #9277 from oysteinkrog/fix/DualX_Endstops 
[2.0.x] Fix DUAL_X_CARRIAGE endstop tests
 2018-01-22 07:42:49 -06:00
Scott Lahteine
90d011cc48 Use ADD_PORT_ARG for all cases 2018-01-22 06:27:22 -06:00
Scott Lahteine
51c7b5d46f Fix set_home_offset bug from bad porting 2018-01-22 06:16:21 -06:00
Scott Lahteine
b1cd012aa6 Clean up and document load/unload/pause/resume 2018-01-22 05:45:46 -06:00
Scott Lahteine
266086670b Better LCD message when heating needed 2018-01-22 04:38:37 -06:00
Scott Lahteine
a718f5bdf3 Don't run M600 on filament runout if the nozzle is cold 2018-01-22 04:38:37 -06:00
Scott Lahteine
61bf8478a2 Add hotEnough methods 2018-01-22 04:38:37 -06:00
Scott Lahteine
7a52dfad55
Merge pull request #9283 from thinkyhead/bf2_jgaurora_configs 
[2.0.x] Add JGAurora A5 support
 2018-01-22 02:21:56 -06:00
Chris Pepper
f875f49caa [2.0.x] LPC1768: Fix: Serial pins disabled correctly when in use (#9193) 2018-01-22 01:54:41 -06:00
Scott Lahteine
c63cffca7f Add example configs for JGAurora A5 2018-01-22 01:27:11 -06:00
Scott Lahteine
7d6c009104 Add thermistor 15 tuned for JGAurora A5 2018-01-22 01:27:11 -06:00
Scott Lahteine
582d073de1 Patch up digital microstepping and SPI CS pins 2018-01-22 01:27:11 -06:00
Scott Lahteine
ab8a1a2a0d Sync gCreate gMax1.5+ config with 1.1.x 2018-01-22 01:05:12 -06:00
Scott Lahteine
f9dbd4d9f4 Updated FolgerTech i3-2020 config 2018-01-22 01:05:12 -06:00
Scott Lahteine
348b454401 Probe bounds based on bed size 2018-01-22 01:05:11 -06:00
Bob-the-Kuhn
a440522f84
Merge pull request #9284 from Bob-the-Kuhn/DUE-pins-debug 
[2.0.x] PINS_DEBUGGING maintenance
 2018-01-21 18:40:39 -06:00
Scott Lahteine
58ed9901d7 Consistent NEOPIXEL_TYPE options 2018-01-21 17:19:38 -06:00
Scott Lahteine
382a5e3318 Clean up trailing whitespace 2018-01-21 17:19:38 -06:00
Øystein Krog
441517bbe1 Fix DUAL_X_CARRIAGE endstops 
\#8170 fixed
 2018-01-21 15:32:19 +01:00
Scott Lahteine
b46932f0c0
Merge pull request #9273 from thinkyhead/bf2_creality_tuneup 
[2.0.x] Fix and improve Creality configs
 2018-01-21 02:53:16 -06:00
Scott Lahteine
49bcb5ce2d
Merge pull request #9220 from benlye/lcd-timer 
[2.0.x] Fix LCD timer string length
 2018-01-21 02:47:59 -06:00
Scott Lahteine
07db5638e2 Add a heating indicator X offset 2018-01-21 02:04:14 -06:00
Scott Lahteine
c68ce8667d Fix and improve Creality configs 2018-01-21 02:04:14 -06:00
Scott Lahteine
8190fdb260
[2.0.x] Option to use Neopixel as case light (#9270) 
* Add option to use Neopixel as case light

* Apply CASE_LIGHT_USE_NEOPIXEL to example configs
 2018-01-20 16:58:41 -06:00
GMagician
9b519864bf [2.0.x] Relative movements fix (#9259) 2018-01-20 15:22:03 -06:00
Scott Lahteine
887664aa61 Restore broken Dual X Carriage 2018-01-20 15:08:50 -06:00
Scott Lahteine
fb044b6a64 Fix HAL_timer_set_current_count for STM32F1 2018-01-20 14:57:17 -06:00
Scott Lahteine
a8638aa20d Update STM32F1 timer code to use libmaple bb_perip 2018-01-20 14:56:57 -06:00
Scott Lahteine
2e2fd8fd79
Merge pull request #9261 from tcm0116/2.0.x-delta_softstops 
[2.0.x] Allow DELTA to compile with soft endstops disabled
 2018-01-20 14:16:30 -06:00
Scott Lahteine
750cc02b3a
Use delay() in serial temp report 2018-01-20 14:13:17 -06:00
Scott Lahteine
9de8c04945
Allow FIL_RUNOUT_PIN override on RAMPS-based boards 2018-01-20 12:00:59 -06:00
Scott Lahteine
57b61491d3
Set FIL_RUNOUT_PIN for Creality CR10-S 
Tested with M43 and found to be connected to DIO 2
 2018-01-20 11:56:57 -06:00
Scott Lahteine
4a4d832344
Use standard encoder pulses/steps for CR-10S 2018-01-20 11:35:52 -06:00
Thomas Moore
44239b1062 Allow DELTA to compile with soft endstops disabled 2018-01-20 09:40:36 -06:00
Scott Lahteine
4bc4351250
Date refresh 2018-01-20 09:17:57 -06:00
Scott Lahteine
303d792b9f
Merge pull request #9253 from tcm0116/2.0.x-mks_sbase 
[2.0.x] Cleanup MKS-SBASE compile warnings
 2018-01-19 22:37:38 -06:00
Scott Lahteine
afec16e644
Merge pull request #9240 from tcm0116/2.0.x-eeprom 
[2.0.x] Follow-on to #9161
 2018-01-19 22:36:24 -06:00
Scott Lahteine
f2ea8a0529
Merge pull request #9197 from p3p/pr_bf2_operation_freemem 
[2.0.x] LPC1768: Free up some RAM
 2018-01-19 22:35:45 -06:00
Scott Lahteine
0c176c677e
Merge pull request #9231 from GMagician/2.0.x-ramps-pins-fixup 
[2.0.x] Expand RAMP case light possibilities
 2018-01-19 22:29:32 -06:00
Scott Lahteine
f2d09f27bb
Merge pull request #9246 from GMagician/2.0.x-bed-temp-limit-fix 
[2.0.x] Standardized max temp values
 2018-01-19 22:27:19 -06:00
Bob-the-Kuhn
16eb966ee3 PINS_DEBUGGING cleanup for DUE 2018-01-19 21:12:24 -06:00
Thomas Moore
63fd23ab1c Cleanup MKS-SBASE compile warnings 2018-01-19 15:46:34 -06:00
Bob-the-Kuhn
11e68541b0
Merge pull request #9245 from Bob-the-Kuhn/TMC2208-sanity-check-2.0.x 
[2.0.x] add TMC2208 sanity check to AVR
 2018-01-19 15:42:53 -06:00
Thomas Moore
429e6ba8a6 Fix lcd_preheat dummy variable types 2018-01-19 15:24:13 -06:00
GMagician
719cd53e09 Standardized max temp values 
Everywhere in menu items temperatures are "defined value" subtracted by 15.
In one place is subtracted by 5
 2018-01-19 19:32:46 +01:00
Bob-the-Kuhn
0ea9cdf4f2 TMC2208 sanity check 2018-01-19 12:19:34 -06:00
Roxy-3D
7c469c0712
Suggested change to fix Due compile problem 2018-01-18 23:00:03 -06:00
Roxy-3D
bfd9728cf4
Serial buffer over run work around for v2.0.0 (#9236) 
* Work around for serial buffer over run

PronterFace sends a lot of M105 commands.  During long operations such
as UBL's G29 P1, G29 P2, G29 P4 and G26 this can over run the serial
buffer.   This results (very often) in a M1 (actually a M1M105) ending
up in the command queue.

Until we figure out a better way to resolve this issue, this will keep
the UBL commands from experiencing bogus commands at thier completion.
 2018-01-18 19:57:18 -06:00
GMagician
c371bdc499 Expand RAMP case light possibilities 
Pin 6 is only used by servos when 2 or more of them are used
 2018-01-18 18:31:08 +01:00
blye
7c18c2ea5f Fix LCD timer string length 2018-01-17 21:10:45 +00:00
Roxy-3D
9d0cf02fef
Correct mesh size calculations 2018-01-17 09:36:12 -06:00