bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
11,180 Commits 1 Branch 4 Tags 151 MiB
e5ae7a07d1
Commit Graph

2438 Commits

Author SHA1 Message Date
Scott Lahteine
aa9d329560 Reduce max accel in Creality configs 2018-08-11 22:56:51 -05:00
Scott Lahteine
c93538e9f3 UBL/planner patch tweaks 2018-08-11 22:50:45 -05:00
Scott Lahteine
0af22549a6 Allow G33 to compile with no LCD 2018-08-11 22:32:09 -05:00
Thomas Moore
fc55f1da01 Account for UBL correction when setting the planner position (#11486) 2018-08-10 13:00:50 -05:00
Scott Lahteine
b328fb4dc9
Treat TMC2660 like non-TMC (#11508) 2018-08-10 00:30:28 -05:00
Scott Lahteine
72b086b90d Add A5984 to example configurations 2018-08-09 23:04:27 -05:00
Greg Nutt
a1a5367380 Smoothieboard V1.0/1.1 and A5984 support 2018-08-09 23:03:17 -05:00
Scott Lahteine
f891416e70 No raise on G28 after power-loss 2018-08-07 13:51:36 -05:00
Scott Lahteine
e4ecade8d4 Fix AUTO_POWER_CONTROL compile error 
Counterpart to #11467

Co-Authored-By: lsellens <lsellens@users.noreply.github.com>
 2018-08-06 23:20:51 -05:00
Giuliano
eee1b7c50c [2.0.x] Fix compile error (#11465) 
Address #11463
 2018-08-06 23:14:53 -05:00
Giuliano
e85feb2545 [2.0.x] Better timing handling (#11461) 2018-08-06 23:13:36 -05:00
Scott Lahteine
79835590e3
Easier to disable homing validation (#11458) 2018-08-06 23:11:37 -05:00
Scott Lahteine
131d216afa
Fix drivers.h dependency, defer macro evaluation (#11450) 2018-08-03 21:49:04 -05:00
Scott Lahteine
9c62c47579
[2.0.x] Fix Dual X Carriage tool change crash (#11447) 2018-08-03 20:47:29 -05:00
Scott Lahteine
9bae413901
Add Bigtreetech/BIQU KFB 2.0 board (#11446) 2018-08-03 18:14:26 -05:00
Marcio Teixeira
f2224755ad Fix jumping progress bar. (#11439) 
- When LCD_SET_PROGRESS_MANUALLY was disabled and an SD print was not active (i.e. the printer was idle), progress_bar_percent would read uninitialized memory from stack and cause progress bar to jump wildly.
- Also updated conditions in `#ifdef` to match `ultralcd.cpp`
 2018-08-03 17:17:02 -05:00
Scott Lahteine
aae02827c0 Cosmetic pins changes 2018-08-03 17:03:19 -05:00
Scott Lahteine
64c493ad82 MKS_12864_OLED code cleanup 2018-07-30 23:22:40 -05:00
Scott Lahteine
b826bf4194
Fix initial safe_speed in jerk code (#11417) 2018-07-30 22:50:08 -05:00
forkoz
2cc950d67e [2.0.x] MKS SBASE Trinamic examples/support (#11402) 2018-07-30 22:48:58 -05:00
Roxy-3D
16432376ab
Revert "[2.0.x]Idex and bl touch fixes" (#11407) 
* Revert "[2.0.x] bltouch home refinements (#11397)"

This reverts commit 74900f7a70.

* Revert "[2.0.x]Idex and bl touch fixes (#11395)"

This reverts commit 6dafb90c01.
 2018-07-28 23:14:46 -05:00
Giuliano
74900f7a70 [2.0.x] bltouch home refinements (#11397) 
Just create  a better functions call logic flow
 2018-07-28 19:30:14 -05:00
silentninja1
6dafb90c01 [2.0.x]Idex and bl touch fixes (#11395) 
* Fix BLTouch homing

Deploy at start, dont call generic stow function at finish or raise goes too high before setting 0

* Update tool_change.cpp

* Update motion.cpp

* Update motion.cpp

* Update motion.cpp

* Update motion.cpp

* Change brackets to be more in align of Marlin coding standards
 2018-07-28 10:33:31 -05:00
Giuliano
5ce5ff8e9b [2.0.x] fix bltouch homing (#11379) 
Partially revert. Seems to solve the issue, but one report says G29 still fails.
 2018-07-27 18:30:08 -05:00
Scott Lahteine
15d68cb496 Pre-override of ST7920 delays before HAL.h 2018-07-26 23:33:18 -05:00
Dave Johnson
8a24ff94d1 AT90USB1286 PIO cleanup and optimization (#11230) 
-normalize `env` and `board` to lowercase naming convention.
-make board `name` follow descriptive convention.
-implement `-fsingle-precision-constant` compile optimization per https://github.com/MarlinFirmware/Marlin/pull/11178#issuecomment-401673901
-fix typo in 5DPRINT entry.
 2018-07-26 05:58:28 -05:00
Lee Olivares
094e6d81a5 Add Einstart-S support (#11219) 
Indeed the HAL does not need to be mucked around with to expose ATmega2560 pins not available as numbers on the MEGA board, I'll need to update the wiki with that tidbit and a reference to the pin-mapping comment in `fastio_1280.h`.
 2018-07-26 05:52:22 -05:00
Scott Lahteine
244b9a8257 Better fastio 1280/2560 pin list 
Co-Authored-By: bleughb <36889022+bleughb@users.noreply.github.com>
 2018-07-26 05:23:51 -05:00
Scott Lahteine
955a7f0ae9
Improve driver.h macros (#11371) 2018-07-26 05:11:22 -05:00
MikeLud
aadcf08913 [2.0.x] add Calibrate Z (M915) to Prepare Menu (#11331) 2018-07-26 05:09:49 -05:00
Giuliano
4237c3d9f8 [2.0.x] different bltouch init (#11135) 2018-07-26 05:04:09 -05:00
Andy Shaw
624986d423 Ensure ADC conversion is complete before reading (#11336) 
The current Marlin implementation relies on a timer interrupt to start the ADC conversion and read it. However in some circumstances the interrupt can be delayed resulting in insufficient time being available for the ADC conversion. This results in a bad reading and false temperature fluctuations. These changes make sure that the conversion is complete (by checking the ADC hardware via the HAL) before reading a value.

See: https://github.com/MarlinFirmware/Marlin/issues/11323
 2018-07-26 03:59:19 -05:00
Scott Lahteine
e2aa635e70 Fix Anet A6 thermistors 
Co-Authored-By: vitekn <vitekn@users.noreply.github.com>
 2018-07-26 02:02:27 -05:00
Bo Herrmannsen
67b205fd45 Add support for board RuRAMPS4D v1.3 (#11363) 2018-07-25 19:32:27 -05:00
forkoz
d1c6687ecd Update MKS sBase pins (#11357) 2018-07-25 19:19:09 -05:00
Scott Lahteine
048dbf6eca
Merge pull request #11275 from thinkyhead/bf2_pwm_adjustments 
[2.0.x] Tweak some SoftPWM code
 2018-07-25 19:02:28 -05:00
Scott Lahteine
e05e95cf97 Clean trailing whitespace 2018-07-25 18:49:47 -05:00
Scott Lahteine
22ebbc091f Tweak some SoftPWM code 2018-07-25 18:09:31 -05:00
Scott Lahteine
32de09f5c5 Specify some extra CR-10S pins 2018-07-25 18:08:09 -05:00
J.C. Nelson
9c2bfa2ab3 Remove extra parameter to enqueue. (#11364) 2018-07-25 18:02:02 -05:00
Giuliano
bd3ec66a78 [2.0.x] typo fix (#11365) 
Typo fix
 2018-07-25 18:00:47 -05:00
teemuatlut
fbcdf5eaeb Simplify stepper driver per-axis selection 2018-07-25 02:47:43 -05:00
Scott Lahteine
e5c0b490c8 Add *_DRIVER_TYPE to example configs 
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
 2018-07-25 02:47:30 -05:00
Eyal
fbdbe53290 Fix get_period_inverse(0) so it doesn't crash (#11334) 2018-07-25 01:58:40 -05:00
Scott Lahteine
14e2b11195 Fix spelling in configs 2018-07-24 21:03:38 -05:00
Scott Lahteine
4685c7d59f Followup to M91x I patch 2018-07-24 18:30:28 -05:00
Roxy-3D
62fa028155
Handle dual gantry machines better 2018-07-24 15:34:53 -05:00
Roxy-3D
09485f63e9
add missing ')' 2018-07-22 10:50:41 -05:00
Roxy-3D
a35abce1ac
Fix missing ')' 2018-07-19 19:20:40 -05:00
Scott Lahteine
76d4cfb064 Tweak some Max7219 code 2018-07-19 18:49:39 -05:00
Scott Lahteine
4195757585
Merge pull request #11309 from thinkyhead/bf2_manual_probe_start_z 
[2.0.x] Manual Z Start Height
 2018-07-19 18:26:26 -05:00
Roxy-3D
03b01e2500
Folger Tech i3-2020 now defaults to 2 Max7219 units 2018-07-19 17:02:46 -05:00
Roxy-3D
db85ca93c4
Change Max7219_idle_task() to use a column instead of row if Y-Axis as 16 LED's 2018-07-19 17:01:31 -05:00
Roxy-3D
9660996cc3
Add Multi Unit Support for Max7219 to bugfix_2.0.0 (#11285) 
* Add Multi Unit Support for Max7219 to bugfix_2.0.0

* Apply multi-MAX7219 to example configs

* Tweak some spacing, macros
 2018-07-19 13:56:47 -05:00
Scott Lahteine
39c8aed8ba Add MANUAL_PROBE_START_Z to example configs 2018-07-18 21:49:20 -05:00
Scott Lahteine
2106fa26b1 Add MANUAL_PROBE_START_Z for manual probing 2018-07-18 21:49:20 -05:00
Scott Lahteine
17ed0f815c Fix tool_change call in UBL G29 
Fix #11279, #11252
 2018-07-18 20:30:30 -05:00
Scott Lahteine
6d2aff03bd
Merge pull request #11306 from thinkyhead/bf2_power_loss_pin 
[2.0.x] Add support for power loss detect pin
 2018-07-18 20:13:20 -05:00
Scott Lahteine
63a146d424 planner.synchronize at start of tool_change 
See https://github.com/MarlinFirmware/Marlin/issues/10949#issuecomment-398540498
 2018-07-18 20:10:55 -05:00
Scott Lahteine
665ac1e4d0 Add POWER_LOSS_PIN support 2018-07-18 19:55:10 -05:00
Scott Lahteine
2243f72523 Add POWER_LOSS_PIN to example configs 2018-07-18 19:55:10 -05:00
Chris Pepper
47d5fcbbcc [2.0.x] Change MKS SBASE default serial port to avoid confusion (#11301) 2018-07-18 18:43:20 -05:00
Scott Lahteine
c83109c0ae
Merge pull request #11238 from xC0000005/MalyanLCDUpdate 
[2.0.x] Malyan LCD Feedrate + Better Temp Handling
 2018-07-17 21:06:52 -05:00
Scott Lahteine
64f007580b Fix some header comments 2018-07-17 19:50:24 -05:00
Giuliano
aed1d17a2d Initialize default units (#11295) 
When `INCH_MODE_SUPPORT` is enabled no default unit is set. This fixes it.
 2018-07-17 19:37:30 -05:00
Scott Lahteine
8c40f0c6c7 Reduce TQ message code size 2018-07-17 18:18:52 -05:00
xC0000005
b04e0c0cbb Malyan LCD feedrate, better temp handling. 2018-07-17 18:18:52 -05:00
Scott Lahteine
065e9c3d66 Add card.longest_filename method 2018-07-17 18:18:52 -05:00
Roxy-3D
71df1f7f57
Don't display M421 information for UBL at startup 
It takes too long to display the mesh data for large mesh's at startup.   We should consider ways to speed this up.
Perhaps it makes sense to display an entire row of the mesh instead of just one mesh point?
 2018-07-17 17:19:52 -05:00
Scott Lahteine
be7d1dfb3c
Merge pull request #11267 from teemuatlut/bf2_lpc_spi 
[2.0.x] LPC1768: Expand hardware SPI class
 2018-07-16 21:52:18 -05:00
Giuliano
8f686aa449 [2.0.x] Fix change filament crash (#11269) 
Prevent crash, on filament change, when printer is not homed
 2018-07-16 21:49:29 -05:00
teemuatlut
f38c81cdde LPC176x: Expand HW SPI class 2018-07-14 19:06:27 +03:00
teemuatlut
3b5dec4b13 Add new LPC include folder 2018-07-14 18:58:56 +03:00
Scott Lahteine
e486326910 Vellemann K8400 Y bed size is 180 
Co-Authored-By: kaimimue <kaimimue@users.noreply.github.com>
 2018-07-13 23:19:46 -05:00
Giuliano
e5ea9d200f [2.0.x] fix kill printer (#11260) 
This will fix kill message on dual printer with 0 alignment offset
 2018-07-13 23:12:43 -05:00
Jamie Bainbridge
8c57cadbe7 Include stdlib in fontutils (#11251) 
When `REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER` is defined and Re-ARM build is attempted, `u8g_fontutf8.cpp` includes `fontutils.h` which uses `abs()`.

However, `abs()` is defined in `stdlib.h` which is not included in `fontutils.h`, so compile fails with an error.

Include `stdlib.h` in `fontutils.h` so that `abs()` is defined before `u8g_fontutf8.cpp` needs to use it, resolving the compile error.

Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
 2018-07-13 00:02:38 -05:00
Scott Lahteine
bf7d0ba859 Assert that XY probe offsets are integers 2018-07-12 22:48:07 -05:00
Scott Lahteine
12854f1909 Add Z_CLEARANCE_MULTI_PROBE to example configs 
Co-Authored-By: nightgryphon <ngryph@gmail.com>
 2018-07-12 22:46:34 -05:00
Scott Lahteine
25e2ca8896 Add Z_CLEARANCE_MULTI_PROBE 
Co-Authored-By: nightgryphon <ngryph@gmail.com>
 2018-07-12 22:46:34 -05:00
Scott Lahteine
fd8a76493b
Unify M91x parameter I meaning, simplify reports (#11249) 2018-07-12 22:31:51 -05:00
Scott Lahteine
566d05006d report_state > event_handler 
Make the endstop report method track endstop changes on its own.
 2018-07-11 21:08:07 -05:00
Scott Lahteine
6b521b6df2 Loosen thermistor table size limit 
Co-Authored-By: Aaron Griffith <aargri@gmail.com>
 2018-07-11 21:08:07 -05:00
Scott Lahteine
20761b88e0
Merge pull request #11212 from AlexanderAmelkin/2.0-HD44780-remove-unused-include 
[2.0.x][HD44780] Remove unused include
 2018-07-08 17:19:59 -05:00
Roxy-3D
603e136e87
Resolve issue where user can't edit UBL's mesh 2018-07-08 14:41:38 -05:00
Alexander Amelkin
ed720194d2 [2.0.x][HD44780] Remove unused include 
The <binary.h> header is not available in STM32 toolchain
and is not used anywhere in ultralcd_common_HD44780.h.
If it is used anywhere in HD44780 support for other platforms,
it must be included in the corresponding .cpp file directly
and put under appropriate conditional compilation directives
for the platform requiring it.

As I was unable to find such code, I consider the file unused
and hence remove the inclusion.
 2018-07-06 23:45:47 -05:00
Scott Lahteine
d05e832f29 Add STM32F1 support for SD-based EEPROM 2018-07-06 23:45:47 -05:00
Scott Lahteine
63f4c9bdb9 Followup to float maths patch 2018-07-06 21:34:09 -05:00
Scott Lahteine
2992112da0 Optimize delta kinematics 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-07-04 22:28:56 -05:00
etagle
1367df2875 Replace double with float, optimize calculation 2018-07-04 22:28:56 -05:00
Scott Lahteine
d960d448fa Optimize calculations with LROUND 2018-07-04 22:22:28 -05:00
Scott Lahteine
68e6650df7 Remove Quake Fast Inverse SQRT (it isn't faster) 2018-07-04 22:22:10 -05:00
etagle
e7e896e7d7 More tweaks to fastio_Due.h 2018-07-04 17:57:47 -05:00
Chris Pepper
55f4744e54 [LPC176x] Endstop Interrupts Feature (#11202) 
Enable the endstop interrupts feature for LPC176x boards. Although Smoothieboard chose to use non-interrupt capable pins for their endstops, and this has been copied by clones, so they can't use it.
 2018-07-04 17:51:45 -05:00
Chris Pepper
5abf5bc8a7 [LPC176x] Fix Interrupt forward declarations (#11200) 2018-07-04 17:43:14 -05:00
Chris Pepper
cbea385ed7 [2.0.x] Fix LCD_LANGUAGE options list formatting in config (#11198) 
* Fix LCD_LANGUAGE options list formatting in config
* Remove 'cn' language option from list
 2018-07-04 17:42:14 -05:00
Scott Lahteine
6837252fba
Merge pull request #11196 from thinkyhead/bf2_fix_m914_sgt 
[2.0.x] No M914 or SGT with non-sensorless axes
 2018-07-04 02:34:48 -05:00
Scott Lahteine
5379c115c8 Fix Trigorilla include typo 2018-07-03 20:23:26 -05:00
Scott Lahteine
9c058091e9 No M914 or SGT set for non-sensorless axes 2018-07-03 20:09:13 -05:00
Scott Lahteine
c7ec6c68e7 Patch SCARA config to match 1.1.x 2018-07-03 20:09:13 -05:00
Scott Lahteine
480a3d3d0c Apply sensorless homing requirements only for specified axes 2018-07-03 19:16:09 -05:00
Scott Lahteine
47ee149dfd
Merge pull request #11195 from thinkyhead/bf2_tronxy_x3a 
[2.0.x] Tronxy X3A configurations and thermistor
 2018-07-03 19:06:01 -05:00
Scott Lahteine
8c0ec81a19 Followup to #11187 2018-07-03 18:19:26 -05:00
Scott Lahteine
48c1f32b3e Add configurations for Tronxy X3A 2018-07-03 17:56:48 -05:00
Scott Lahteine
568cfe7caa Add thermistor 501 (100K Zonestar) 2018-07-03 17:52:06 -05:00
Scott Lahteine
1a0f4dedad
Fix and improve POWER_LOSS_RECOVERY (#11187) 2018-07-02 23:21:28 -05:00
Scott Lahteine
e0ab8acf19 Add "Marlin Dev Mode" option 2018-07-02 22:55:21 -05:00
Scott Lahteine
4b2af6ab48 Minor patches to POWER_LOSS_RECOVERY 2018-07-02 17:26:53 -05:00
Scott Lahteine
1ea222e6fc Turn off DISABLE_INACTIVE_EXTRUDER with SWITCHING_NOZZLE 
Fix #11183
 2018-07-02 17:26:53 -05:00
Roman Moravčík
8299ac121d [2.0.x] Slovak translation update (#11175) 2018-07-01 23:15:51 -05:00
teemuatlut
3de0c85d41 Fix RRW graphical LCD constructor macro (#11171) 2018-07-01 23:14:23 -05:00
TheLongAndOnly
cedc158106 [2.0.x] Board specific init macro (#11170) 2018-07-01 23:11:42 -05:00
Chris Pepper
5616581eb1 [LPC176x] Update fastio _GET_INPUT, _GET_OUTPUT macros (#11168) 2018-07-01 23:02:38 -05:00
Scott Lahteine
8a8eae8d97
Implement more fastio_Due macros (#11165) 2018-07-01 01:24:06 -05:00
Scott Lahteine
c51e27d11d
Do a hard kill for failed homing moves (#11161) 2018-06-30 21:54:07 -05:00
Scott Lahteine
90ba77ea0f Lose the old HOMEAXIS macro 2018-06-30 18:13:13 -05:00
Scott Lahteine
2421f3a47d Detect endstop hits in any direction 2018-06-30 17:27:37 -05:00
Scott Lahteine
f9a090b2cf Fix Trigorilla 1.4 pins 
See #11097
 2018-06-30 13:45:55 -05:00
Scott Lahteine
8eaac0dab3
Add delta feedrate scaling (#11153) 2018-06-30 13:44:27 -05:00
Scott Lahteine
444725ae9a Non-conflicting CS pins for MKS Gen L 2018-06-30 02:36:01 -05:00
J.C. Nelson
8c9f90153e Enable Malyan LCD Support for M200 printers. (#11051) 2018-06-30 00:35:54 -05:00
Scott Lahteine
fc10101b06 Tweaks to fastio_Due.h 2018-06-30 00:15:50 -05:00
Scott Lahteine
05518d6add Add newline to end of file 2018-06-29 23:54:16 -05:00
Scott Lahteine
d4fde91222 Fix serial.h including itself 2018-06-29 23:53:25 -05:00
Scott Lahteine
a431013eb7 Fix G33 compile warning 2018-06-29 23:17:51 -05:00
Scott Lahteine
bd7f5848f1
Remove JUNCTION_DEVIATION_INCLUDE_E option (#11147) 2018-06-29 22:42:05 -05:00
Scott Lahteine
fbf1c9b496
Fix and tweak POWER_LOSS_RECOVERY (#11151) 2018-06-29 22:41:02 -05:00
Colin Gilgenbach
0fff79c24b Fixes G29_with_retry behavior (#11045) 
* Fix G29 (ABL) retry behavior
 2018-06-29 20:48:11 -05:00
Scott Lahteine
3349eb0020 Fix SKEW_CORRECTION compile error 2018-06-29 19:38:18 -05:00
Scott Lahteine
a264030526 Fix "G29" G29_MAX_RETRIES handling 2018-06-29 18:46:31 -05:00
Scott Lahteine
42f9921482 Ignore Z min endstop with separate Z-probe 
To allow for the case where a Z endstop (e.g., hall effect) is higher than the probe trigger point, don't check the Z min endstop during probe moves. See #11134
 2018-06-28 05:06:11 -05:00
Scott Lahteine
1b8973eb1c Fix up microsteps conditionals 2018-06-27 23:41:32 -05:00
Scott Lahteine
aa4cd2e861 Eliminate stepper.* signed/unsigned warnings 2018-06-27 23:10:51 -05:00
Eduardo José Tagle
edb21f349a Fix stepper/planner block handling, race conditions (#11098) 
- Allow planner to alter the deceleration phase of the currently executing block.
- Remove BUSY flag, as it is NON ATOMIC to set bits in the Stepper ISR and Planner at the same time.
 2018-06-27 18:11:16 -05:00
Scott Lahteine
4d3a9930c5 Match ASM comment spacing to 1.1.x 2018-06-27 17:26:48 -05:00
Scott Lahteine
053438a3aa
Poll all endstops, even when stationary (#11123) 2018-06-27 04:18:57 -04:00
Andy Shaw
3b3029c4bf Make max_e_jerk an array to reduce CPU usage (#11118) 2018-06-26 22:38:31 -04:00
Scott Lahteine
d13f76b7da Patch some loop macros 2018-06-26 20:30:52 -05:00
Scott Lahteine
229b26b02c Clear LED matrix without startup test 2018-06-26 18:54:01 -05:00
Alexander Amelkin
ffdbc1f42c STM32F1: Fix SD card persistent store API (#11090) 2018-06-26 14:41:23 -04:00
Giuliano
8d8f257384 [2.0.x] Fix advanced pause init values (#11095) 
Fixed for cycle used to initialize default values
 2018-06-26 14:37:52 -04:00
etagle
5b49fccf80 Add stepper driver DIR delay configuration option 
...and recommended pulse width configuration for A4988
 2018-06-26 13:28:04 -05:00
Scott Lahteine
d86f25ab63 Fix Serial ISR priority for LPC1768 
Co-Authored-By: p3p <p3p@p3psoft.co.uk>
 2018-06-25 12:15:41 -04:00
etagle
fb4e0b105b Fix endstops compilation error 2018-06-25 12:10:17 -04:00
Eduardo José Tagle
48a15d1c7e [2.0.x] Fix stepper/planner race condition and Stepper pulse timer (#11081) 
* Planner: Removal of some race conditions between Stepper ISR and Planner, some of them pointed out by @AnHardt, some of my own findings
* Fixing timing on stepper pulses adding a compensation for the non-null time required to set ports.
 2018-06-22 09:15:37 -05:00
Michael Triffon
7e802145cc [2.0.x] Add CR-10 stock display support for Re-Arm (EXP3) (#11068) 2018-06-21 23:08:17 -05:00
Scott Lahteine
50b6204079 Fix LIN_ADVANCE max_e_jerk_factor 
According to https://github.com/MarlinFirmware/Marlin/issues/9917#issuecomment-399204568
 2018-06-21 22:02:34 -04:00
Scott Lahteine
99591dc20c
Filter endstops state at all times (#11066) 2018-06-21 20:14:16 -05:00
Scott Lahteine
a5c11bf578
Merge pull request #11075 from thinkyhead/bf2_value_editing 
[2.0.x] Fix value editing (with callback)
 2018-06-21 20:13:58 -05:00
Roxy-3D
1d7dd0edfd
Add the move_z_after_probing() functionality to UBL's G29 J 2018-06-21 13:26:20 -05:00
Scott Lahteine
383129728a Edit Z fade as whole numbers 2018-06-21 11:52:29 -04:00
Scott Lahteine
1239e8eda2 Fix value editing with callback 2018-06-21 11:52:03 -04:00
Scott Lahteine
7a84b03796 Use MIN/MAX in post-conditionals 2018-06-20 03:15:19 -05:00
Scott Lahteine
a2a30ff0ac Use Tool 0 for Dual X Axis G29 
See https://github.com/MarlinFirmware/Marlin/issues/5597#issuecomment-397683325
 2018-06-20 01:32:23 -05:00
Scott Lahteine
e366d55bc2 Don't reset stepper timeout for all g-codes 2018-06-19 21:48:28 -05:00
Scott Lahteine
7406f04029 Use MAX (not max) in stepper.h 2018-06-19 20:51:07 -05:00
Roxy-3D
7c54c4ed27
Tiny improvement to M7219 
The registers within the Max7219 can get corrupted a number of ways.  This allows the Max7219 to be reset and fully initialized.
And...  it also allows the user to see the initialization pattern.
 2018-06-19 14:46:30 -05:00
Giuliano
a65d15c905 [2.0.x] Fix Italian msg len (#11058) 
Fix message to long for 12864 display
 2018-06-18 22:04:55 -05:00
Scott Lahteine
d4795e5b8e
[2.0.x] Tweaks and additions for MAX7219 (#11034) 2018-06-18 22:04:03 -05:00
Scott Lahteine
e23677a7b2 Update some G-code comments 2018-06-18 16:13:01 -05:00
Chris Pepper
0312c42f9d [2.0.x] LPC176x Serial cleanup (#11032) 2018-06-16 20:59:22 -05:00
Scott Lahteine
c1269c2ec1 Tweak AVR critical section defines 2018-06-16 17:42:32 -05:00
Scott Lahteine
da94e0bd27 Unsigned eeprom mesh addresses 2018-06-15 15:51:57 -05:00
Chris Pepper
f88adcbfd5 [2.0.x][LPC176x] Fix binary linking broken by pio update (#11026) 2018-06-15 15:32:51 -05:00
Simon Jouet
e2aeda61ed HAL for Espressif ESP32 Wifi 2018-06-13 19:33:35 -05:00
Scott Lahteine
091f742432 Add WIFISUPPORT to example configs 2018-06-13 19:27:33 -05:00
Scott Lahteine
19d4c7c1cd Tweak HAL header comments 2018-06-13 19:08:42 -05:00
Giuliano
cce0523a95 [2.0.x] reset bltouch on home (#11018) 
Added reset bltouch instead. This ensure properly stow even when in error.
 2018-06-13 14:09:13 -05:00
Scott Lahteine
4c8d6df13c
Extra insurance against endstop false positives (#11013) 2018-06-13 01:22:02 -05:00
Scott Lahteine
81edbfa665
Merge pull request #11004 from ejtagle/always_honor_maximum_step_rate 
[2.0.x] Fix stepper pulse minimum period and timing calculations
 2018-06-12 22:17:22 -05:00
Scott Lahteine
f3fed52348 Fix coolstep_min_speed / sensorless homing 
Fix #8890
 2018-06-12 22:12:46 -05:00
etagle
a215725df6 Fix stepper pulse timing 
Always honor minimum period on stepper pulse generation, and fix timing calculations

Signed-off-by: etagle <ejtagle@hotmail.com>
 2018-06-12 21:34:24 -05:00
Scott Lahteine
0d79128c8d Localize stepper-specific defines 2018-06-12 21:16:54 -05:00
Scott Lahteine
a9861a780e Tweak HAL heading 2018-06-12 19:40:17 -05:00
Scott Lahteine
cf53e502a2 No need to set input after attachInterrupt 2018-06-12 18:43:11 -05:00
Karl Andersson
e0276d2f32 Official STMicroelectronics Arduino Core STM32F4 HAL compatibility (#11006) 2018-06-12 18:38:00 -05:00
Scott Lahteine
4dbec774b5 HAL_*_TIMER_RATE => *_TIMER_RATE 2018-06-12 16:39:12 -05:00
Scott Lahteine
12689f2470
Merge pull request #11001 from thinkyhead/bf2_junction_deviation_fix 
[2.0.x] Updates for junction_deviation_mm
 2018-06-11 22:31:17 -05:00
Scott Lahteine
9b945c13a1 Fix STM32F1 ISR_ENABLED 2018-06-11 22:09:45 -05:00
Scott Lahteine
9d04f47d98 Improvements for junction_deviation_mm 
- Drop `max_jerk` with `JUNCTION_DEVIATION`
- Add `max_e_jerk_factor` for use by `LIN_ADVANCE`
- Recalculate `max_e_jerk_factor` when `junction_deviation_mm` changes
- Fix LCD editing of `junction_deviation_mm`
 2018-06-11 22:05:16 -05:00
Scott Lahteine
f2c3b0d476 Use bit flags for homed/known 2018-06-11 22:05:16 -05:00
Scott Lahteine
4832be52d7 Followup to G29 O 2018-06-11 21:57:26 -05:00
Robert Mendon
86170e6a66 [2.0.x] Add O (optional) flag to G28/G29 (#10913) 2018-06-11 21:51:48 -05:00
Alexey Shvetsov
2ddba201c0 STM32F1 HAL Fixes (#10999) 
- Enable / disable interrupts with `__iSeiRetVal` / `__iCliRetVal`
- Add STM32F1 to Travis CI tests
 2018-06-11 20:00:56 -05:00
Scott Lahteine
43bdd0bfe4 Fix indent in stepper.h 2018-06-11 19:17:46 -05:00
Scott Lahteine
2ba198a624 Tweak M122 report spacing 2018-06-10 20:33:18 -05:00
Eduardo José Tagle
5590c8ffd0 Fix MarlinSerial (AVR) (#10991) 
An undocumented hw bug makes the UART lose chars when RX ISR is disabled, even for a very small amount of time. This happens when RX_BUFFER > 256, and the result is corrupted received commands. Solved by implementing pseudo-atomic operations on 16bit indices.
 2018-06-10 20:32:20 -05:00
Scott Lahteine
3fd1f32b73 Fix ADC key and chamber temp 2018-06-10 20:11:40 -05:00
Scott Lahteine
117fd007a9 Followup to pin error change 2018-06-10 19:28:45 -05:00
Scott Lahteine
ae07a3e4aa Multiplier edit large ranges 2018-06-10 18:22:12 -05:00
Scott Lahteine
20a5db03bb Junction Deviation limit (0.01 to 0.3) 2018-06-10 18:22:08 -05:00
Scott Lahteine
a2f521d34b
Add Junction Deviation mm runtime setting (#10990) 2018-06-10 18:02:54 -05:00
Scott Lahteine
590ce1c33e Fix serial debug ouput 2018-06-10 17:54:22 -05:00
Scott Lahteine
968a5d2e63 Protected pin err for M226 2018-06-10 17:45:47 -05:00
Scott Lahteine
4b90cd8ead
Merge pull request #10922 from ejtagle/bugfix-2.0.x 
[2.0.x] Adaptive multiaxis step smoothing, and tons of fixes
 2018-06-10 16:28:52 -05:00
Giuliano
f1cdfe3dfd [2.0.x] stow bltouch before start homing (#10987) 2018-06-10 16:27:14 -05:00
etagle
6f14bcaa3e Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping 
The timing value should be properly set for ALL boards. The compiler will check and set maximum step rate calculations based on those values.
 2018-06-10 16:02:47 -05:00
etagle
39a7e7720d Adaptive multiaxis step smoothing 
- Stepper bugs fixed
- Support MIXING_EXTRUDER with Linear Advance
- Miscellaneous cleanup
 2018-06-10 16:02:47 -05:00
etagle
99af086cea Add hidden Serial overflow debug options 2018-06-10 04:25:42 -05:00
etagle
d90e8fcad9 Fix XON/XOFF implementation 
Pointed out by @GMagician
 2018-06-10 04:25:42 -05:00
Scott Lahteine
bbf80440bf Add sanity-check for MOTHERBOARD 2018-06-10 04:03:33 -05:00
Giuliano
b64cc9329e [2.0.x] Fix dual enstop home (#10980) 2018-06-10 02:08:47 -05:00
Scott Lahteine
8a376e6beb Update MINIMUM_STEPPER_PULSE description 2018-06-10 00:13:03 -05:00
Scott Lahteine
3701869e6c Add HAL_timer_start for AVR, use stepper timer to time pulses 2018-06-09 22:30:13 -05:00
Giuliano
e970e429b6 [2.0.x] Fix null check in lsDive (#10978) 2018-06-09 22:03:49 -05:00
etagle
d82704354f Increase the planner first block HOLD delay to 100mS 2018-06-09 21:12:37 -05:00
Scott Lahteine
779d4a17a0 Highlight 64128N and common ST7565 difference 
Followup to #10920, addressing #10962
 2018-06-09 19:18:41 -05:00
Scott Lahteine
b9418439b9 Prevent MB false-positive on bad board name 2018-06-08 19:58:43 -05:00
Scott Lahteine
88314b8910 CREALITY_ENDER is long gone 
As noted in #10965
 2018-06-08 19:53:21 -05:00
Scott Lahteine
334341c632
Hephestos config updates (#10960) 2018-06-07 21:23:55 -05:00
Scott Lahteine
f74278b8b1 Add -4 thermocouple to list in configs 2018-06-07 21:04:06 -05:00
Scott Lahteine
7ba5afff01
Allow FAN_PIN override, pins cleanup (#10956) 2018-06-07 16:46:13 -05:00
Scott Lahteine
55aedf036b Fix M503 ABL mesh report. (Zero-based IJ indices) 2018-06-07 16:36:50 -05:00
Scott Lahteine
e7623b5788 Restore Z_PROBE_PIN to pinsDebug_list.h 2018-06-07 15:39:24 -05:00
Scott Lahteine
a426986df8
Ensure pins set to INPUT after attachInterrupt (#10928) 2018-06-06 20:59:08 -05:00
Scott Lahteine
d8b983f624
More concise M503 output for M906, M913, M914 (#10947) 2018-06-06 20:58:28 -05:00
Giuliano
eb1026d438 [2.0.x] Fix compile warning (#10931) 2018-06-05 22:44:34 -05:00
Scott Lahteine
c2bdbdffaa Prevent a buffer overflow in diveToFile 
Co-Authored-By: akunt
 2018-06-05 22:13:17 -05:00
Giuliano
c9d1a620d4 [2.0.x] fix indentations (#10934) 2018-06-05 02:03:26 -05:00
Roxy-3D
d550da084f
Fix Max7219 control pins for use with 32-bit platforms 2018-06-04 13:37:23 -05:00
Scott Lahteine
c16e41e9e6 STM32F4 pins cleanup 2018-06-03 19:08:04 -05:00
Scott Lahteine
c685c7b7dd STM32F4: All pins can do PWM 2018-06-03 04:30:15 -05:00
Scott Lahteine
2fd9ba56da LED menu item bool (like Case Lights) 2018-06-03 00:34:29 -05:00
Scott Lahteine
ad8d3150aa Cleanup for dual endstops homing 2018-06-03 00:34:29 -05:00
Scott Lahteine
61181b7f24 Add macros for ST7565 commands 2018-06-02 20:48:44 -05:00
Eduardo José Tagle
d3c02410a8 [2.0.x] Small assorted collection of fixes and improvements (#10911) 
* Misc fixes and improvements

- Get rid of most critical sections on the Serial port drivers for AVR and DUE. Proper usage of FIFOs should allow interrupts to stay enabled without harm to queuing and dequeuing.
  Also, with 8-bit indices (for AVR) and up to 32-bit indices (for ARM), there is no need to protect reads and writes to those indices.
- Simplify the XON/XOFF logic quite a bit. Much cleaner now (both for AVR and ARM)
- Prevent a race condition (edge case) that could happen when estimating the proper value for the stepper timer (by reading it) and writing the calculated value for the time to the next ISR by disabling interrupts in those critical and small sections of the code - The problem could lead to lost steps.
- Fix dual endstops not properly homing bug (maybe).

* Set position immediately when possible
 2018-06-01 19:02:22 -05:00
Scott Lahteine
2deff0d9b9 Fix/Improve junction deviation 
- Respect axis max acceleration limits instead of forcing a fixed acceleration value.
- The `junction_unit_vec` ensures proper handling of entry and exit speeds even when the axes involved have different limits.
 2018-05-31 20:09:53 -05:00
Scott Lahteine
6885ca606c Drop JUNCTION_ACCELERATION from example configs 2018-05-31 20:07:28 -05:00
Chris Pepper
d87257f63c [2.0.x][LPC176x] Fix PIO build flags (#10909) 
Don't build and link with different flags, the binary may not work.
 2018-05-31 19:08:31 -05:00
Axel
ae322e0c54 [2.0.x] Add GTM32 Pro VB support (#10898) 2018-05-31 00:11:38 -05:00
Scott Lahteine
d259070980 Clean up trailing spaces from vim, etc. 2018-05-31 00:09:41 -05:00
Scott Lahteine
21d812d502 Fix the Z un-hop on G11 
Co-Authored-By: zarthcode <anthony.clay@zarthcode.com>
 2018-05-29 23:41:36 -05:00
Scott Lahteine
d3c473002a For SCARA probe Y offset is proximal/distal 2018-05-29 21:55:53 -05:00
Scott Lahteine
b90f54b0fc Improve probe logging 2018-05-29 21:54:13 -05:00
Scott Lahteine
3f2a062a57 Fix M914 value range (-64...+63) 
Fix #10896
 2018-05-29 12:02:15 -05:00
Scott Lahteine
b6cd8d9cc6 Set deltas to park on the left 2018-05-29 11:44:31 -05:00
Scott Lahteine
9713538427 HOTENDS for Switching Nozzle with Switching Extruder 2018-05-29 11:05:52 -05:00
Scott Lahteine
c68b7b3913 Update Fan 2 and E0 Auto Fan pins for Trigorilla 2018-05-28 21:11:12 -05:00
Scott Lahteine
cbcb284f4a Allow libServo::attach to work on Teensy 3.5/3.6 2018-05-28 20:56:24 -05:00
Chris Pepper
f89f7c4a82 [2.0.x][LPC176x][Build] Force single precision constants, disable freestanding (#10892) 2018-05-28 19:38:22 -05:00
Scott Lahteine
4299e5dc8b
Modify E-stepping macros for use in LINEAR_ADVANCE (#10885) 2018-05-28 19:34:08 -05:00
Scott Lahteine
8f14ef855d More concise commentary in planner.cpp 2018-05-28 19:25:18 -05:00
Scott Lahteine
6919e87656 Minor cleanup of multi-stepping logic 2018-05-28 17:44:33 -05:00
android444
16da5c62d0 Teensy 3.x fastio pullup (#10890) 2018-05-28 16:25:12 -05:00
Scott Lahteine
853a9056ac Long thermistor tables need special consideration 2018-05-28 06:28:34 -05:00
Scott Lahteine
a4f9c3373f Tweak thermistor spacing 2018-05-28 03:44:32 -05:00
Scott Lahteine
9b9b62b218 delay(SERVO_DELAY) => safe_delay(servo_delay[servo_index]) 2018-05-28 03:44:32 -05:00
Scott Lahteine
1ce97f1f6d
Faster (bisect) search in thermistor tables (#10883) 2018-05-27 23:27:51 -05:00
Scott Lahteine
0ca9db7051 Correct HOTENDS for SWITCHING_EXTRUDER 2018-05-27 23:22:48 -05:00
Scott Lahteine
945139e328 Clean up some formatting 2018-05-27 17:58:40 -05:00
android444
9c235ef821 [HAL]Add support for ST7920 - Teensy 3.x (#10872) 2018-05-27 03:36:57 -05:00
Eduardo José Tagle
7b9f0302d4 Fix Bresenham rounding errors, add link to article (#10871) 2018-05-27 01:49:59 -05:00
Scott Lahteine
2566342979 Adjust some commentary 2018-05-27 00:10:25 -05:00
Scott Lahteine
1b200f3312 Sanity check SWITCHING_EXTRUDER with SINGLENOZZLE 2018-05-26 23:26:23 -05:00
Scott Lahteine
6775a16c97 Fix switching extruder stepping with LA 2018-05-26 19:07:01 -05:00
Scott Lahteine
2e139fe50f Tweak configuration spacing 2018-05-26 18:33:51 -05:00
Scott Lahteine
931ab4ec40 Rename Junction Deviation options 2018-05-26 18:33:51 -05:00
Scott Lahteine
aaaf09bda2 BEZIER_JERK_CONTROL => S_CURVE_ACCELERATION 2018-05-26 18:33:51 -05:00
Scott Lahteine
cf7d5a642a
Fix manual moves for switching tools (#10868) 2018-05-26 18:30:53 -05:00
Eduardo José Tagle
1da2c4f1c1 Text LCD display routine fix. Coauthored with @MagoKimbra (#10864) 2018-05-26 18:13:33 -05:00
Bob-the-Kuhn
1c0ad8bbae wrong type of exit method 2018-05-26 08:17:03 -05:00
Scott Lahteine
01d37e00af
Fix up stepper ISR with linear advance timing (#10853) 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-26 01:00:13 -05:00
Eduardo José Tagle
6f330f397e [2.0.x] Buffer overflow and scroll fix, UTF8 cleanup (#10844) 2018-05-25 23:32:37 -05:00
Bob Kuhn
235facd545 install AVRDUDE 5.10, faster disk find for LPC1768 (#10849) 2018-05-25 20:26:48 -05:00
Scott Lahteine
645df23eb0 Fix warning with FASTER_GCODE_PARSER disabled 2018-05-25 06:45:42 -05:00
Scott Lahteine
d74e333c0f Make sure FAN_ANIM_FRAMES is defined 2018-05-25 05:28:50 -05:00
Bob Kuhn
e2db509d58 [2.0.x] Update/Fix LPC1768 extra script upload_extra_script.py (#10843) 
* Use a different method to find the volume info in Windows
 2018-05-25 04:31:18 -05:00
Scott Lahteine
7261f48872 Fix reset of endstops and move state 2018-05-24 19:33:36 -05:00
Scott Lahteine
50fa8e01c1 Minor optimization of axis_did_move bits 2018-05-24 19:08:07 -05:00
Scott Lahteine
a94506ada0 Fix K8400 Y min pos, M118 comment 2018-05-24 08:21:16 -05:00
Scott Lahteine
336a022529 Support Malyan LCD without SD 2018-05-24 05:01:18 -05:00
Scott Lahteine
f28e366b77 Followup for core endstops 2018-05-24 03:02:57 -05:00
Scott Lahteine
8b44745bc7
Clean up and consolidate SD-related code (#10831) 2018-05-24 01:18:56 -05:00
Scott Lahteine
9644d56b42 Patches for core motion tests 2018-05-24 00:49:01 -05:00
Scott Lahteine
5f8591528e Remove #pragmas that don't help c files 2018-05-23 23:47:16 -05:00
Scott Lahteine
230ae6a143 Default G30 to engage / disengage 2018-05-23 16:57:23 -05:00
Scott Lahteine
3e3789da85
Regression: Endstops Core compatibility (#10823) 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-23 03:45:25 -05:00
Scott Lahteine
c89649b46e Suppress U8glib build warnings 2018-05-23 02:47:36 -05:00
Axel
bbd09a99f1 32 bit boards classification cleanup (#10818) 
- Ordering and match classification between `boards.h` and `pins.h`
- Check `pins.h` environments
 2018-05-22 21:20:24 -05:00
Scott Lahteine
ee333f6be2 Followup to endstops tweaks 2018-05-22 20:41:03 -05:00
Axel
d98bc71af7 Boards classification arrangement (#10814) 
STM32 ARM Cortex-M3 boards were listed as M4
 2018-05-22 02:56:51 -05:00
Scott Lahteine
4b610b333e Tweak G38 formatting 2018-05-22 01:56:03 -05:00
Scott Lahteine
d2647c1f19 Fix G1 behaviour after tool unpark 
Fix #10777 for 2.0.x

Co-Authored-By: Ante Vukorepa <o.orcinus@gmail.com>
 2018-05-22 00:53:00 -05:00
Scott Lahteine
3bb950c69a Fix DEBUG_LEVELING_FEATURE for MBL 
As noted in #10777
 2018-05-22 00:49:15 -05:00
Scott Lahteine
1af98519cd Group and adjust LCD buttons code 2018-05-22 00:37:45 -05:00
Scott Lahteine
0c3773d724 Cleanup in stepper_indirection.h 2018-05-22 00:36:03 -05:00
Scott Lahteine
4118199ddd Tweaks to core headers 2018-05-21 20:32:18 -05:00
Scott Lahteine
4b2f6e3b2b
[2.0.x] Add endstop noise filter (#10796) 2018-05-21 15:51:38 -05:00
Scott Lahteine
65a004564c Stepper::set_position needed for some applications 2018-05-21 15:21:33 -05:00
Scott Lahteine
435ecb6b67 Followup to stepper/planner refactor 2018-05-20 23:13:38 -05:00
Bob Kuhn
6dfbb39f83 [LPC1768] Add error-handling to upload script, update autobuild.py (#10802) 2018-05-20 21:22:04 -05:00
Scott Lahteine
68d7fcec83 Simplify and fix Z fade height edit 
Fix #10761
 2018-05-20 12:29:23 -05:00
Bob Kuhn
d557c84a71 [2.0.x] Error for FAST_PWM_FAN with 32 bit CPU (#10798) 2018-05-20 11:37:55 -05:00
etagle
569df3fc0c Fix interrupt-based endstop detection 
- Also implemented real endstop reading on interrupt.
 2018-05-20 07:10:24 -05:00
etagle
a4af975873 Fix planner block optimization 
- Fixed the planner incorrectly avoiding optimization of the block following the active one.
- Added extra conditions to terminate planner early and avoid redundant computations.
 2018-05-20 07:10:24 -05:00
etagle
e0ca627033 Planner block HOLD flag 
Allows the Stepper ISR to wait until a given block is free for use. Allows Planner to plan the first move, which is split into two.
 2018-05-20 06:23:58 -05:00
etagle
a11eb50a3e Refactor and optimize Stepper/Planner 
Better encapsulation and considerably reduce stepper jitter
 2018-05-20 06:23:58 -05:00
etagle
0566badcef Add memory barrier, optimal interrupt on-off 
Disabling an ISR on ARM has 3 instructions of latency. A Memory barrier is REQUIRED to ensure proper and predictable disabling. Memory barriers are expensive, so avoid disabling if already disabled (See https://mcuoneclipse.com/2015/10/16/nvic-disabling-interrupts-on-arm-cortex-m-and-the-need-for-a-memory-barrier-instruction/)
 2018-05-20 02:39:34 -05:00
Scott Lahteine
c2fb2f54a1 Use assembly for AVR ISR vectors 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-20 01:58:51 -05:00
Scott Lahteine
206014a957 Fix LPC176x timer functions 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-20 01:58:51 -05:00
Scott Lahteine
59f7861bcb
Move backtrace to the HAL folder (#10790) 2018-05-20 01:33:21 -05:00
Scott Lahteine
228139eae6 Tweak some LCD comments 2018-05-19 21:00:08 -05:00
Scott Lahteine
7dc03ce721 Simplified fix for babystep pulse width 
Alternative to the apparently superfluous double delay
 2018-05-19 21:00:08 -05:00
Scott Lahteine
65270d6a96 Fix LIN_ADVANCE + SWITCHING_EXTRUDER 
Followup to #10656
 2018-05-19 18:32:00 -05:00
Bob Kuhn
62e2987488 add AT90USB support & add items to popup menu (#10779) 2018-05-19 17:39:26 -05:00
Bob Kuhn
9ad42d6617 add delay between pulse edges (#10778) 2018-05-19 17:12:16 -05:00
Scott Lahteine
83d42f33e1 Add HAS_HOTEND_OFFSET_Z conditional 2018-05-19 17:05:15 -05:00
GMagician
3c76bda2d8 Fix switching extruder 
`DONT_SWITCH` got lost along the way. Replace it with `DO_SWITCH_EXTRUDER` and adjust the code.
 2018-05-19 17:05:15 -05:00
Scott Lahteine
c173a31060 Fix some compile warnings 2018-05-19 16:54:48 -05:00
Giuliano
e1d9046efc [2.0.x] Temperature reading fix (#10774) 2018-05-19 15:39:36 -05:00
Chris Pepper
9b64fdbc3a [LPC176x] HAL: Add missing program space definition (#10776) 2018-05-19 15:37:54 -05:00
Scott Lahteine
50270b53a0 Clear up some more compile warnings 2018-05-17 18:40:49 -05:00
etagle
06fd4d7b28 Improve NOMORE, NOLESS, and LIMIT macros 2018-05-17 18:23:14 -05:00
etagle
40d7e12827 Removing warnings from compilation 2018-05-17 18:04:22 -05:00
Scott Lahteine
0755fe8ba2 Add FAN_MAX_PWM to example configs 2018-05-15 21:18:47 -05:00
Jiri Jaburek
43ddb29f9e Add FAN_MAX_PWM for M106-controlled fans 2018-05-15 21:18:46 -05:00
Scott Lahteine
0ea60d506a Clear up LCD-related compile issues 2018-05-15 00:06:59 -05:00
Scott Lahteine
eb2eb72720
Modify UBL mesh_is_valid and use in leveling_is_valid (#10746) 2018-05-14 22:36:03 -05:00
Scott Lahteine
b7dfc79988
Disable SERIAL_PORT_2 by default and sanity-check it (#10748) 2018-05-14 21:38:24 -05:00
Scott Lahteine
3f6073e23a Followup tweak to lcdprint_u8g.cpp 2018-05-14 14:42:11 -05:00
Scott Lahteine
fb608938f8 Prevent compilation of unused u8g-oriented code 2018-05-14 13:31:04 -05:00
Scott Lahteine
35258dd50b Consistent heating status and status reset 
Fix #10699
 2018-05-13 17:18:19 -05:00
Scott Lahteine
37b15fe4cf Reorder HAL timer header items 2018-05-13 16:50:39 -05:00
Scott Lahteine
836b0bbeee Fix MBL line_to_destination 
Fix #10708
 2018-05-13 16:50:39 -05:00
Scott Lahteine
ba4c32eec5 Followup to _AXIS patch 2018-05-13 10:43:35 -05:00
Scott Lahteine
d9154ebdf6 Followup to math patch 2018-05-13 09:30:27 -05:00
Scott Lahteine
f07260c33f Don't babystep on long click unless printing 
As pointed out in #10731
 2018-05-13 08:11:35 -05:00
Scott Lahteine
883b0c9880
Convert custom maths to inlines (#10728) 2018-05-13 08:10:08 -05:00
Scott Lahteine
08e36e264e Apply _AXIS macro 2018-05-13 06:51:01 -05:00
Scott Lahteine
99ecdf59af Smarter MIN, MAX, ABS macros 
Use macros that explicitly avoid double-evaluation and can be used for any datatype, replacing `min`, `max`, `abs`, `fabs`, `labs`, and `FABS`.

Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-13 04:52:56 -05:00
Scott Lahteine
083ec9963e Tweaks to heater / lcd conditions 2018-05-13 04:52:56 -05:00
etagle
9d98a62699 Followup to HAL optimizations and delays 
- Cleanups, fixes for Due HAL code.
- TC_IER is write-only. Use TC_IMR to test ISR state.
 2018-05-13 00:46:23 -05:00
Scott Lahteine
8f8c6a9bc4
Move get_axis_position_mm to Planner (#10718) 2018-05-12 09:59:11 -05:00
Scott Lahteine
a1062eec5b
Better handling of DELAY_NS and DELAY_US (#10716) 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-12 08:34:04 -05:00
Scott Lahteine
f5aaa2d6c0 Fix some compiler warnings 2018-05-12 05:28:12 -05:00
Scott Lahteine
3614e6ce0f Fix Switching Extruder with Linear Advance 2018-05-12 02:26:14 -05:00
Scott Lahteine
625035a9ce
Fix M301 access to lpq_len (#10714) 
Co-Authored-By: Zwaubel
 2018-05-12 02:13:40 -05:00
etagle
1b225a2809 DUE: Emergency parser for the USB CDC 2018-05-12 02:12:11 -05:00
Scott Lahteine
306f0f2135
Move Stepper::synchronize to Planner (#10713) 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-12 01:38:02 -05:00
Scott Lahteine
f2e3c9896e Fix compile warnings in backtrace 
Part of #10688

Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-11 23:38:29 -05:00
Scott Lahteine
acacee80a2 Add JUNCTION_ACCELERATION_FACTOR to configs 
Part of #10688

Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-11 23:13:27 -05:00
Giuliano
d99f1b2245 [2.0.x] EEPROM code cleanup (#10710) 2018-05-11 18:06:04 -05:00
ManuelMcLure
8679f671ed Remove dependency on PI. (#10701) 2018-05-11 17:55:56 -05:00
Scott Lahteine
6671c064cd
Use arc moves for G26 if enabled (#10696) 
Co-Authored-By: ManuelMcLure <manuelmclure@users.noreply.github.com>
 2018-05-11 02:15:14 -05:00
Scott Lahteine
325bbbc8c2
[2.0.x] Enable AD595 and AD8495 in concert (#10693) 
* Allow both AD595 and AD8495 in concert
* General temperature code tweaks
 2018-05-11 01:01:51 -05:00
Scott Lahteine
c43235dd39 Remove non-special comments 2018-05-11 00:36:04 -05:00
ManuelMcLure
613a3be167 Remove hidden dependencies on destination. Fixes #10686. (#10691) 2018-05-11 00:30:51 -05:00
Scott Lahteine
23a876b08d Update a comment in motion.cpp 2018-05-10 15:03:37 -05:00
Scott Lahteine
439e0cdd0f
Patch up reverse_pass_kernel (and other planner code) (#10674) 2018-05-10 01:30:55 -05:00
Scott Lahteine
fe5c308872
Correction to Printrboard SDSS pin (#10677) 
Co-Authored-By: Simon Swenson <simon-swenson-8351@users.noreply.github.com>
 2018-05-10 01:28:55 -05:00
Scott Lahteine
265161ba30
Blink the value for unhomed/unknown axes (#10670) 2018-05-10 01:19:20 -05:00
Scott Lahteine
57c2f8d2f6 Trailing whitespace cleanup 2018-05-10 00:17:10 -05:00
Scott Lahteine
b76344c080 More Trinamic cleanup 2018-05-10 00:12:10 -05:00
Scott Lahteine
473c6d3a91 Drop extra RIGIDBOT_PANEL from D6 config 2018-05-09 18:02:07 -05:00
Giuliano
44f3a6dc3b [2.0.x] Add missing axes to M911, M912 (#10668) 2018-05-09 17:58:11 -05:00
Scott Lahteine
722aba77f3
Fix LIN_ADVANCE + SWITCHING_EXTRUDER stepper directions (#10656) 2018-05-09 14:36:09 -05:00
Scott Lahteine
a225d2e99e Fix compilation with UBL and Arc/Bézier 
Fix #10660
 2018-05-09 00:40:37 -05:00
Scott Lahteine
6d9ec1852a Fix compilation of say_units 
Fixes #10663
 2018-05-09 00:30:29 -05:00
Scott Lahteine
19f189b4e5
Add UBL support for G2/G3 and G5 (#10648) 2018-05-08 11:10:45 -05:00
Scott Lahteine
4c663b0216 Add JUNCTION_DEVIATION to example configs 2018-05-08 10:08:54 -05:00
Scott Lahteine
4d4bf7897d Junction Deviation jerk limiting option 2018-05-08 10:08:54 -05:00
Scott Lahteine
0436e16fb2 Apply shorthand Assembler macros 2018-05-08 10:08:54 -05:00
Scott Lahteine
d1b619be52 Standardize some hexadecimals 2018-05-08 09:19:18 -05:00
Scott Lahteine
ec05408453
Add 3-frame fan animation to bitmaps (#10654) 2018-05-08 09:06:01 -05:00
Scott Lahteine
55f1f8446b Show correct current units in M503 2018-05-08 06:29:53 -05:00
Giuliano
4e16e699c1 Fix sanity checks for dual axes (#10633) 2018-05-07 03:34:26 -05:00
Scott Lahteine
a1fab8336e Fix abort of SD printing 2018-05-07 02:52:26 -05:00
Scott Lahteine
e978e6e782
[2.0.x] Arrange LCD options by type (#10630) 2018-05-06 19:16:55 -05:00
Scott Lahteine
8c5bc77fb9 Fix the sanity-check for config versions 2018-05-06 09:37:00 -05:00
Scott Lahteine
1f11b0f612 Fully init planner sync block 2018-05-06 08:16:54 -05:00
Scott Lahteine
f30241bda5
Merge pull request #10614 from thinkyhead/bf2_synced_planner_set_position 
[2.0.x] Improve sync of planner / stepper position, asynchronous G92
 2018-05-06 03:10:43 -05:00
Scott Lahteine
840ff60952 Bring some configs up to date 2018-05-06 02:42:27 -05:00
Phr3d13
71cd681473 Add Geeetech i3 Pro C / W examples (#10626) 
Added base example configs for Geeetech's Pro C and Pro W machines.
 2018-05-06 02:07:54 -05:00
Scott Lahteine
62e7a9c671 Fix up fwretract handling 2018-05-06 01:24:14 -05:00
Scott Lahteine
bfe223e120 Adjust usage of stepper.synchronize 2018-05-06 01:24:14 -05:00
Scott Lahteine
af1950a63e Improve sync of stepper positions 2018-05-06 01:24:14 -05:00
Scott Lahteine
0c23792344 Apply int32_t to stepper 2018-05-05 18:21:03 -05:00
Roxy-3D
c2c02bdc67
Change Max7219 coordinates to traditional (X,Y) 2018-05-05 16:08:54 -05:00
Scott Lahteine
b337698f96 Additional patch for no heated bed 2018-05-04 00:15:37 -05:00
Scott Lahteine
76da6cc544 Fix Ender 2 build volume 2018-05-02 19:03:29 -05:00
Scott Lahteine
81b632c255 Additional temp-oriented improvements 2018-05-02 08:43:22 -05:00
nightdemonx
e911635fb1 Add thermocouple with AD8495 support 2018-05-02 08:43:16 -05:00
Scott Lahteine
00e86f1c2d Add Velleman RGB-LED strip support to K8400 2018-05-02 08:10:48 -05:00
Bob-the-Kuhn
410b023b50 [2.0.x] Add Viki support to RAMPS_FD_V1 (DUE) (#10598) 2018-05-02 07:54:06 -05:00
Scott Lahteine
b7e938a9fb LCD_BED_LEVELING enables a sub-menu for ABL 2018-05-01 07:13:56 -05:00
Scott Lahteine
a90d99c27c Rename float32 => float52, etc. 2018-05-01 07:08:47 -05:00
Scott Lahteine
d7b699ec34 Fewer includes of vector_3.h 2018-05-01 07:05:18 -05:00
thisiskeithb
9312636ee4 Ender-3 config files (#10585) 2018-05-01 06:44:50 -05:00
Scott Lahteine
05fca752d6 Clean up autostart handling 2018-05-01 01:35:57 -05:00
Scott Lahteine
c87b0e21be Add units to probe speed comments 2018-04-30 23:50:28 -05:00
Scott Lahteine
2c1205d8b1 Improve debug of homing move feedrate 2018-04-30 23:49:51 -05:00
Scott Lahteine
c8e4b7c8a6 Fix XY homing move away rate 2018-04-30 23:49:07 -05:00
Scott Lahteine
05c33833e7
[2.0.x] Add NO_LCD_MENUS option (#10582) 2018-04-30 21:16:31 -05:00
Scott Lahteine
524cc392f4 Fix sd_status comparison 
Co-Authored-By: perkmeister <perkmeister@users.noreply.github.com>
 2018-04-30 21:09:50 -05:00
MagoKimbra
1f92b9a4ed Fix do_probe_move with fr_mm_s (#10576) 2018-04-30 16:28:20 -05:00
Scott Lahteine
a73cece360 Fix utility.cpp for DEBUG_LEVELING_FEATURE 
As mentioned in https://github.com/MarlinFirmware/Marlin/issues/9429#issuecomment-385305597

Co-Authored-By: Jack Bradach <jack@bradach.net>
 2018-04-30 03:40:50 -05:00
Scott Lahteine
4dfc011d86 Fix homing with probe feedrates 2018-04-30 03:35:07 -05:00
Scott Lahteine
59fda986ea Allow Z_AFTER_PROBING to be 0 2018-04-30 03:25:47 -05:00
Scott Lahteine
63e4afc910 Do rounding in integer (instead of FIXFLOAT) 
Co-Authored-By: Bob-the-Kuhn <bob-the-kuhn@users.noreply.github.com>
 2018-04-29 19:33:26 -05:00
Scott Lahteine
616651ff23 Add sanity check for LED_CONTROL_MENU 
Addressing #10569
 2018-04-29 18:34:57 -05:00
Scott Lahteine
9e0d99c0c6
Round all floats in string conversion functions (#10566) 2018-04-29 00:51:36 -05:00
Scott Lahteine
3f68203324 Modify FastIO error message 2018-04-28 20:27:36 -05:00
Scott Lahteine
1dab44213a Fix the TMC26X initializer CS pin argument 
From #10531

Co-Authored-By: chriscg9 <chriscg9@users.noreply.github.com>
 2018-04-28 12:02:45 -05:00
Scott Lahteine
cd08f01bb4 Fix M421 comment in gcode.h 2018-04-28 11:16:52 -05:00
Scott Lahteine
7546f87949 Allow a home bump of 0 when homing Z with probe 2018-04-28 10:26:31 -05:00
Scott Lahteine
d470a1234f Fix ENABLED/DISABLED for DUE 
…and any other platforms where `false`/`true` are defined as `0x0`/`0x1`.

This fixes issue #10550.
 2018-04-28 10:12:37 -05:00
Scott Lahteine
683dc24e0f When homing with Z probe bump at Z_PROBE_SPEED_SLOW 2018-04-28 08:50:23 -05:00
Scott Lahteine
8db7fb226a Fix M420 C for UBL 2018-04-28 08:14:20 -05:00
Scott Lahteine
ed8d2bc225 Clean up some endstop inverting examples 2018-04-28 08:04:43 -05:00
Scott Lahteine
c7305be4d2 Fix some endstop inverting settings 2018-04-28 08:04:33 -05:00
Bob-the-Kuhn
f973ff49ae [2.0.x] MKS SBASE - Separate SD_DETECT for LCD and on-board SD cards (#10557) 2018-04-28 07:24:07 -05:00
Scott Lahteine
5ac226aa93 Further cleanup of inline delays 2018-04-27 19:22:22 -05:00
Marcio Teixeira
724e9f56c8 Removed "const" to match parser. (#10548) 2018-04-27 17:48:52 -05:00
Giuliano
2e1939e85c [2.0.x] report error on unsupported commands (#10553) 
Raise an error when an unknown/unsupported G/M command is requires.

This will address #10546
 2018-04-27 17:40:27 -05:00
Scott Lahteine
a474a7e675 Correct AVR_ATmega328_FAMILY macro 
…as with #10540

Co-Authored-By: per1234 <per1234@users.noreply.github.com>
 2018-04-27 03:13:46 -05:00
Scott Lahteine
f790b4bc0a Reorganize some conditionals 2018-04-27 02:23:11 -05:00
Scott Lahteine
a51ba6e3f6 Fix ABL grid bounds test for Delta/SCARA 
Addressing #10538
 2018-04-27 02:23:10 -05:00
Scott Lahteine
df6bc812b5 Fix disable of Z_HOMING_SENSITIVITY for HOMING_Z_WITH_PROBE 
As pointed out in #10532
 2018-04-27 02:23:10 -05:00
Scott Lahteine
63e0b36f8b Fix G29_RECOVER_COMMANDS typo 2018-04-27 02:23:10 -05:00
Scott Lahteine
f83361a814 Apply const to tmc_sensorless_homing 2018-04-27 02:23:10 -05:00
Scott Lahteine
212e52e485 Basic delay for Max7219 on ARM 2018-04-27 00:41:29 -05:00
Scott Lahteine
7b6e742436 Wrap delay macros in do{}while(0) 2018-04-26 18:18:23 -05:00
Karl Andersson
58ca3be1ec delayMicroseconds() cannot be called in critical section (#10535) 
on the STM32 platform
 2018-04-26 14:31:01 -05:00
Bob-the-Kuhn
00dfaae8df [2.0.x] Platformio - automate build & environment selection (#10503) 2018-04-26 02:42:06 -05:00
Scott Lahteine
299c4fed42 Undefine PIDTEMPBED without a bed heater 2018-04-26 01:30:10 -05:00
Scott Lahteine
456cf971af HAL FastIO cleanup and fixes 2018-04-26 00:40:16 -05:00
J.C. Nelson
5b5e322356 Set Interrupt Priorities and Grouping for STM32F103. (#10517) 2018-04-26 00:21:16 -05:00
Scott Lahteine
0e450df6a2 MKS OLED support for RUMBA 
Based on #10519

Co-Authored-By: Alex <alex18881@users.noreply.github.com>
 2018-04-25 23:00:44 -05:00
Scott Lahteine
2578996631
[2.0.x] Emergency parser for multiple serial ports (#10524) 2018-04-25 20:58:00 -05:00
Scott Lahteine
8cc31d1b2e Cleanup to emergency parser 
Followup to #10516
 2018-04-25 06:54:37 -05:00
Chris Pepper
2242b98248 [LPC176x] Emergency Parser Feature (#10516) 2018-04-25 06:44:26 -05:00
Scott Lahteine
eef0248a1c
Add M420 C to adjust the whole mesh (#10522) 2018-04-25 06:43:45 -05:00
Eduardo José Tagle
c1e5ebbc1e [2.0.x] AVR: Atomic bit set and clear of upper pin ports without critical section (#10502) 
* AVR: Atomic bit set and clear

The critical section can be dropped, saving 3 cycles per access. Also simplified pin toggling for all ports.
 2018-04-24 13:45:43 -05:00
Marcio Teixeira
02a711c4d6 [2.0.x] Fix crash upon repeated calls to process_subcommands_now_P (#10509) 2018-04-24 13:44:22 -05:00
Scott Lahteine
a3ce8a3fcd Add sanity checks for EMERGENCY_PARSER 2018-04-24 09:24:26 -05:00
Scott Lahteine
f06c3c38b9 Fix M0_M1 with no LCD 2018-04-24 09:22:05 -05:00
Scott Lahteine
c82dd5129f Revert potentially-not-redundant UBL test 
Response to #10435
 2018-04-24 08:04:13 -05:00
Scott Lahteine
9789c1c719 Fix current_temperature_chamber compile error 
Fix #10505
 2018-04-24 07:55:58 -05:00
Eduardo José Tagle
0c428a66d9 Proper AVR preemptive interrupt handling (#10496) 
Also simplify logic on all ARM-based interrupts. Now, it is REQUIRED to properly configure interrupt priority. USART should have highest priority, followed by Stepper, and then all others.
 2018-04-23 22:05:07 -05:00
Scott Lahteine
f423e54f77 Strip trailing spaces 2018-04-23 18:00:43 -05:00
Scott Lahteine
8177c4334e
Merge pull request #10498 from xC0000005/MalyanLCDFix 
Fix overridden Malyan LCD functions
 2018-04-23 17:22:43 -05:00
Scott Lahteine
cb46cb8480
Add HAS_HEATED_BED conditional (#10495) 2018-04-23 17:13:01 -05:00
Marcio Teixeira
10a25f733e Add SENSORLESS_HOMING to Archim 2.0 (#10500) 2018-04-23 17:11:33 -05:00
xC0000005
24d23ce49b Fix function definitions for Malyan LCD 2018-04-23 16:56:37 -05:00
Alexey Shvetsov
ad58b626a3 Fix pin mappings for Viki2 on Azteeg X5 GT (#10487) 2018-04-22 18:41:30 -05:00
Scott Lahteine
9e07df5c1b
Extra options for LEVEL_BED_CORNERS (#10483) 2018-04-22 02:50:48 -05:00
Scott Lahteine
1c3d49afe0 Fix G28 with Z_AFTER_PROBING 
Fix #10476
 2018-04-22 01:23:26 -05:00
Scott Lahteine
b6747c742a Cleanup AZTEEG_X5_GT pins for VIKI 
What should the SD detect and SDSS pins be? Followup soon on #8138
 2018-04-22 01:19:43 -05:00
Scott Lahteine
023385ca59
Merge pull request #10479 from thinkyhead/bf2_creality_power_loss_resume 
[2.0.x] Creality3D Power-Loss Recovery
 2018-04-22 00:17:44 -05:00
Scott Lahteine
3396671011
[2.0.x] Reset LCD status to fallbacks (#10470) 
* Remove obsolete strings
* Tweak some static consts
* Reset LCD status to fallbacks
 2018-04-22 00:16:30 -05:00
Scott Lahteine
d58450c82a Russian language update 
Co-Authored-By: anton-piliugin <34044202+anton-piliugin@users.noreply.github.com>
 2018-04-22 00:14:20 -05:00