Commit Graph

131 Commits

Author SHA1 Message Date
dbead66988 Allows user to set (almost) any PWM frequency (#12638) 2019-03-08 02:15:42 -06:00
2212da453a Distinguish between analog/digital auto fans (#13298) 2019-03-05 00:41:31 -06:00
758c6c9464 Very minor SPI speedup 2019-02-20 04:36:23 -06:00
0feeef2604 Update copyright in headers 2019-02-12 15:30:11 -06:00
6a57d0b381 Prusa MMU2 (#12967) 2019-01-31 19:10:52 -06:00
f6321f878a Simpler AVR + Trinamic + Soft Serial sanity-check (#12606) 2018-12-08 23:34:26 -06:00
c986239837 A single SERIAL_ECHO macro type (#12557) 2018-11-29 16:58:58 -06:00
826d570162 Combine Travis CI option-setting commands (#12474) 2018-11-18 19:58:02 -06:00
22d7fed60a Fix compile error with SD_FIRMWARE_UPDATE (#12462) 2018-11-17 21:13:36 -06:00
e0956bb572 Drop 'register' storage specifier 2018-11-04 16:17:13 -06:00
f5eab912ed Apply #pragma once, misc cleanup (#12322)
* Apply #pragma once in headers
* Adjust some thermistors formatting
* Misc cleanup and formatting
2018-11-04 02:25:55 -06:00
d015f746cc Fix some compile warnings (#12220) 2018-10-26 03:53:06 -05:00
71e19baf69 Fix kill => disable_all_heaters => print_job_timer.stop (#12146)
- Remove `print_job_timer.stop()` from `disable_all_heaters`
- Call `print_job_timer.stop()` for relevant `disable_all_heaters()`.
- Split up `kill()` for watchdog interrupt safety
2018-10-18 21:20:56 -05:00
0bd54392b7 Use uint8_t in EEPROM code 2018-10-09 19:00:01 -05:00
bfcf570d68 Try ISR_ALIASOF for Endstop Interrupts 2018-10-07 17:05:32 -05:00
d5141c4e03 Fix up leading/trailing whitespace 2018-10-05 18:19:59 -05:00
001f26b642 Template struct simplification for serial (#11990) 2018-10-03 11:01:21 -05:00
d6955f25b2 Expand serial support in DUE/AVR hals exploiting the templated MarlinSerial classes (#11988) 2018-10-03 00:47:27 -05:00
f6f2246f59 Templatized serial classes (#11982) 2018-10-02 22:15:30 -05:00
ee53f7d813 Revert header reorg. 2018-10-02 22:09:41 -05:00
0dedb3e139 Reorganize some core headers (#11983) 2018-10-02 04:25:46 -05:00
84926b1d5a HAL general support for DISABLE_JTAG option (#11211)
Some STM32-based boards may use multiplexed JTAG pins as IO. Up to now the `DISABLE_JTAG` option (defined in pins files) was only supported for AT90-based boards. This commit generalizes the code and adds support for boards based on STM32F1 and STM32F4.
2018-09-27 19:02:50 -04:00
1718eff54a Code changes supporting up to 6 extruders 2018-09-16 22:32:53 -05:00
1a6f2b29b8 Add support for Triple-Z steppers/endstops 2018-09-16 00:35:58 -05:00
6a3207391f Remove obsolete HAL_timer_restrain 2018-08-31 16:17:22 -05:00
5573ef62c6 [2.0.x] PersistentStore update followup (#11549) 2018-08-14 17:54:12 -05:00
834ea7fcea Remove 'const' from PersistentStore::capacity 2018-08-14 04:46:10 -05:00
c64199941e Compile only selected PIO environment (#11519) 2018-08-14 03:28:52 -05:00
865ee5985f Followup persistent store with heading, const 2018-08-13 23:55:33 -05:00
66d2b48b59 Update PersistentStore api (#11538)
- Clean up the API to use a `static` class instance to adhere to Marlin convention
- Add `const` position data access for read/write
- Add Storage capacity to the interface
2018-08-13 17:30:25 -05:00
244b9a8257 Better fastio 1280/2560 pin list
Co-Authored-By: bleughb <36889022+bleughb@users.noreply.github.com>
2018-07-26 05:23:51 -05:00
624986d423 Ensure ADC conversion is complete before reading (#11336)
The current Marlin implementation relies on a timer interrupt to start the ADC conversion and read it. However in some circumstances the interrupt can be delayed resulting in insufficient time being available for the ADC conversion. This results in a bad reading and false temperature fluctuations. These changes make sure that the conversion is complete (by checking the ADC hardware via the HAL) before reading a value.

See: https://github.com/MarlinFirmware/Marlin/issues/11323
2018-07-26 03:59:19 -05:00
fbcdf5eaeb Simplify stepper driver per-axis selection 2018-07-25 02:47:43 -05:00
d05e832f29 Add STM32F1 support for SD-based EEPROM 2018-07-06 23:45:47 -05:00
1367df2875 Replace double with float, optimize calculation 2018-07-04 22:28:56 -05:00
99591dc20c Filter endstops state at all times (#11066) 2018-06-21 20:14:16 -05:00
c1269c2ec1 Tweak AVR critical section defines 2018-06-16 17:42:32 -05:00
19d4c7c1cd Tweak HAL header comments 2018-06-13 19:08:42 -05:00
a215725df6 Fix stepper pulse timing
Always honor minimum period on stepper pulse generation, and fix timing calculations

Signed-off-by: etagle <ejtagle@hotmail.com>
2018-06-12 21:34:24 -05:00
a9861a780e Tweak HAL heading 2018-06-12 19:40:17 -05:00
4dbec774b5 HAL_*_TIMER_RATE => *_TIMER_RATE 2018-06-12 16:39:12 -05:00
5590c8ffd0 Fix MarlinSerial (AVR) (#10991)
An undocumented hw bug makes the UART lose chars when RX ISR is disabled, even for a very small amount of time. This happens when RX_BUFFER > 256, and the result is corrupted received commands. Solved by implementing pseudo-atomic operations on 16bit indices.
2018-06-10 20:32:20 -05:00
99af086cea Add hidden Serial overflow debug options 2018-06-10 04:25:42 -05:00
d90e8fcad9 Fix XON/XOFF implementation
Pointed out by @GMagician
2018-06-10 04:25:42 -05:00
3701869e6c Add HAL_timer_start for AVR, use stepper timer to time pulses 2018-06-09 22:30:13 -05:00
c9d1a620d4 [2.0.x] fix indentations (#10934) 2018-06-05 02:03:26 -05:00
d3c02410a8 [2.0.x] Small assorted collection of fixes and improvements (#10911)
* Misc fixes and improvements

- Get rid of most critical sections on the Serial port drivers for AVR and DUE. Proper usage of FIFOs should allow interrupts to stay enabled without harm to queuing and dequeuing.
  Also, with 8-bit indices (for AVR) and up to 32-bit indices (for ARM), there is no need to protect reads and writes to those indices.
- Simplify the XON/XOFF logic quite a bit. Much cleaner now (both for AVR and ARM)
- Prevent a race condition (edge case) that could happen when estimating the proper value for the stepper timer (by reading it) and writing the calculated value for the time to the next ISR by disabling interrupts in those critical and small sections of the code - The problem could lead to lost steps.
- Fix dual endstops not properly homing bug (maybe).

* Set position immediately when possible
2018-06-01 19:02:22 -05:00
9b9b62b218 delay(SERVO_DELAY) => safe_delay(servo_delay[servo_index]) 2018-05-28 03:44:32 -05:00
6f330f397e [2.0.x] Buffer overflow and scroll fix, UTF8 cleanup (#10844) 2018-05-25 23:32:37 -05:00
4118199ddd Tweaks to core headers 2018-05-21 20:32:18 -05:00