a77f8c6dd5
Implement servo support for STM32F1 ( #11580 )
...
Implement servo support for STM32F1. Original code was incomplete and depended on Servo library from stm32duino which conflicts with `module/servo.h`.
2018-08-20 21:13:51 -05:00
0456caf0ad
Consolidate shared HALs and isolate HAL compile ( #11552 )
2018-08-20 21:11:12 -05:00
dfe18ac633
Fix compilation error for STM32F1 with U8GLIB_SSD1306 or U8GLIB_SH1106 enabled ( #11583 )
...
The `binary.h` file required by `lcd/dogm/dogm_bitmaps.h` is not present in stm32duino environment. Binary macros are defined in `bit_constants.h` in stm32duino framework.
2018-08-20 20:37:56 -05:00
00d24a8219
Don't call __delay_4cycles for 0 cycle delay - takes a really long time. ( #11586 )
2018-08-18 22:50:11 -05:00
0b2d686160
Fix "SD init fail" problem for STM32F1 ( #11579 )
...
Fix "SD init fail" problem for STM32F1 caused by incorrect SS pin state and incorrect SPI mode. Issue #11225
2018-08-17 23:27:10 -05:00
b37bfeffeb
[2.0.x] Use the new const functions of the persistentStore api ( #11544 )
2018-08-14 18:35:36 -05:00
5573ef62c6
[2.0.x] PersistentStore update followup ( #11549 )
2018-08-14 17:54:12 -05:00
834ea7fcea
Remove 'const' from PersistentStore::capacity
2018-08-14 04:46:10 -05:00
c64199941e
Compile only selected PIO environment ( #11519 )
2018-08-14 03:28:52 -05:00
5be2559eda
Use flash memory to emulate EEPROM ( #11500 )
...
Use a sector of the LPC flash memory to emulate EEPROM storage, removing the need to have an SD card to store system parameters.
2018-08-14 01:19:34 -05:00
865ee5985f
Followup persistent store with heading, const
2018-08-13 23:55:33 -05:00
6a8b906318
Followup for persistent_store_api.h
2018-08-13 17:43:35 -05:00
66d2b48b59
Update PersistentStore api ( #11538 )
...
- Clean up the API to use a `static` class instance to adhere to Marlin convention
- Add `const` position data access for read/write
- Add Storage capacity to the interface
2018-08-13 17:30:25 -05:00
15d68cb496
Pre-override of ST7920 delays before HAL.h
2018-07-26 23:33:18 -05:00
244b9a8257
Better fastio 1280/2560 pin list
...
Co-Authored-By: bleughb <36889022+bleughb@users.noreply.github.com >
2018-07-26 05:23:51 -05:00
624986d423
Ensure ADC conversion is complete before reading ( #11336 )
...
The current Marlin implementation relies on a timer interrupt to start the ADC conversion and read it. However in some circumstances the interrupt can be delayed resulting in insufficient time being available for the ADC conversion. This results in a bad reading and false temperature fluctuations. These changes make sure that the conversion is complete (by checking the ADC hardware via the HAL) before reading a value.
See: https://github.com/MarlinFirmware/Marlin/issues/11323
2018-07-26 03:59:19 -05:00
fbcdf5eaeb
Simplify stepper driver per-axis selection
2018-07-25 02:47:43 -05:00
64f007580b
Fix some header comments
2018-07-17 19:50:24 -05:00
f38c81cdde
LPC176x: Expand HW SPI class
2018-07-14 19:06:27 +03:00
3b5dec4b13
Add new LPC include folder
2018-07-14 18:58:56 +03:00
d05e832f29
Add STM32F1 support for SD-based EEPROM
2018-07-06 23:45:47 -05:00
1367df2875
Replace double with float, optimize calculation
2018-07-04 22:28:56 -05:00
e7e896e7d7
More tweaks to fastio_Due.h
2018-07-04 17:57:47 -05:00
55f4744e54
[LPC176x] Endstop Interrupts Feature ( #11202 )
...
Enable the endstop interrupts feature for LPC176x boards. Although Smoothieboard chose to use non-interrupt capable pins for their endstops, and this has been copied by clones, so they can't use it.
2018-07-04 17:51:45 -05:00
5abf5bc8a7
[LPC176x] Fix Interrupt forward declarations ( #11200 )
2018-07-04 17:43:14 -05:00
5616581eb1
[LPC176x] Update fastio _GET_INPUT, _GET_OUTPUT macros ( #11168 )
2018-07-01 23:02:38 -05:00
8a8eae8d97
Implement more fastio_Due macros ( #11165 )
2018-07-01 01:24:06 -05:00
fc10101b06
Tweaks to fastio_Due.h
2018-06-30 00:15:50 -05:00
ffdbc1f42c
STM32F1: Fix SD card persistent store API ( #11090 )
2018-06-26 14:41:23 -04:00
d86f25ab63
Fix Serial ISR priority for LPC1768
...
Co-Authored-By: p3p <p3p@p3psoft.co.uk >
2018-06-25 12:15:41 -04:00
99591dc20c
Filter endstops state at all times ( #11066 )
2018-06-21 20:14:16 -05:00
0312c42f9d
[2.0.x] LPC176x Serial cleanup ( #11032 )
2018-06-16 20:59:22 -05:00
c1269c2ec1
Tweak AVR critical section defines
2018-06-16 17:42:32 -05:00
f88adcbfd5
[2.0.x][LPC176x] Fix binary linking broken by pio update ( #11026 )
2018-06-15 15:32:51 -05:00
e2aeda61ed
HAL for Espressif ESP32 Wifi
2018-06-13 19:33:35 -05:00
19d4c7c1cd
Tweak HAL header comments
2018-06-13 19:08:42 -05:00
a215725df6
Fix stepper pulse timing
...
Always honor minimum period on stepper pulse generation, and fix timing calculations
Signed-off-by: etagle <ejtagle@hotmail.com >
2018-06-12 21:34:24 -05:00
a9861a780e
Tweak HAL heading
2018-06-12 19:40:17 -05:00
cf53e502a2
No need to set input after attachInterrupt
2018-06-12 18:43:11 -05:00
e0276d2f32
Official STMicroelectronics Arduino Core STM32F4 HAL compatibility ( #11006 )
2018-06-12 18:38:00 -05:00
4dbec774b5
HAL_*_TIMER_RATE => *_TIMER_RATE
2018-06-12 16:39:12 -05:00
9b945c13a1
Fix STM32F1 ISR_ENABLED
2018-06-11 22:09:45 -05:00
2ddba201c0
STM32F1 HAL Fixes ( #10999 )
...
- Enable / disable interrupts with `__iSeiRetVal` / `__iCliRetVal`
- Add STM32F1 to Travis CI tests
2018-06-11 20:00:56 -05:00
5590c8ffd0
Fix MarlinSerial (AVR) ( #10991 )
...
An undocumented hw bug makes the UART lose chars when RX ISR is disabled, even for a very small amount of time. This happens when RX_BUFFER > 256, and the result is corrupted received commands. Solved by implementing pseudo-atomic operations on 16bit indices.
2018-06-10 20:32:20 -05:00
117fd007a9
Followup to pin error change
2018-06-10 19:28:45 -05:00
99af086cea
Add hidden Serial overflow debug options
2018-06-10 04:25:42 -05:00
d90e8fcad9
Fix XON/XOFF implementation
...
Pointed out by @GMagician
2018-06-10 04:25:42 -05:00
3701869e6c
Add HAL_timer_start for AVR, use stepper timer to time pulses
2018-06-09 22:30:13 -05:00
a426986df8
Ensure pins set to INPUT after attachInterrupt ( #10928 )
2018-06-06 20:59:08 -05:00
c9d1a620d4
[2.0.x] fix indentations ( #10934 )
2018-06-05 02:03:26 -05:00
