Marlin_Firmware

Author	SHA1	Message	Date
Scott Lahteine	d91710e9aa	Followup for UBL translated strings	2017-06-09 16:59:26 -05:00
Scott Lahteine	761df686bd	Minor cleanup in gcode.h	2017-06-09 16:59:26 -05:00
Thomas Moore	897bc2ac1f	Updates for ensure_safe_temperature (#6963 ) * Updates for ensure_safe_temperature * M600 fixes	2017-06-09 15:19:08 -05:00
Bob-the-Kuhn	1c107b3949	delete problem line	2017-06-09 11:53:36 -05:00
Diederik van der Pant	5b270417ed	added shift register pins for reprapworld keypad v1.1 I recently upgraded my Marlin to V1.1.x and decided to publish my fix to make marlin compile properly when #define board megatronics 2 in combination with #define reprapworld keypad v1.1. It was previously described in the comments of a closed pull request. MarlinFirmware#472. All the buttons on the keypad are now operational.	2017-06-09 14:17:47 +02:00
bgort	2f55870edb	[New Feature] I2C position encoder support (#6946 ) * [New Feature] I2C position encoder support I plan to continue improving/cleaning this up, as there areas that need work. * let the cleanups begin. * progress * more progress * comments, rename files, etc. * clean * Cleanups per thinkyhead * a few more cleanups * cleanups, bugfixes, etc. * remove unnecessary passes_test(), additional cleanups/optimizations * cleanups * misc. * Fix up I2CPEM.init() and a few other things. * organize, fix, rename, etc. * more optimization * a few more tweaks	2017-06-09 08:06:23 -04:00
Bob-the-Kuhn	28d72f48f1	change to DWORD	2017-06-08 16:15:02 -05:00
Bob-the-Kuhn	8d1d9040b6	add static	2017-06-08 14:59:21 -05:00
Bob-the-Kuhn	a17ffe1ece	Merge pull request #6985 from Kaibob2/patch-1 Fix for #6980 (case_light compile problem when EXTENDED_CAPABILITIES_REPORT is enabled)	2017-06-08 11:18:56 -05:00
Tannoo	731c8e6372	Translatable Strings for ubl_G29 (#6990 )	2017-06-08 10:09:39 -05:00
Kai	abb6b8ad54	update language_de.h (#6986 ) There was quite a lot to translate this time. I'm not absolutely confident with the whole UBL stuff and it's a PITA to translate. I don't use any kind of levelling myself as i just have a perfectly level cast aluminium plate as bed. So maybe someone who really uses it might take a closer look at it after it's merged.	2017-06-08 10:04:52 -05:00
Kai	c2eff60d3f	Fix for #6980 Line 7830 prevented successfull compilation when #define CASE_LIGHT_ENABLE is uncommented	2017-06-08 09:19:04 +02:00
Scott Lahteine	1419126721	Merge pull request #6965 from thinkyhead/bf_save_more_sram Use createChar_P to save SRAM in bootscreen	2017-06-07 17:34:19 -05:00
Scott Lahteine	a453be7357	Merge pull request #6973 from bgort/autoreportT Enable AUTO_REPORT_TEMPERATURES by default	2017-06-07 17:33:40 -05:00
Scott Lahteine	1d615e0a67	Merge pull request #6976 from Tannoo/Leveling_in_About_Printer Leveling type in About Printer	2017-06-07 17:26:21 -05:00
Scott Lahteine	707707d71a	Fix LCD status message padding	2017-06-07 16:07:38 -05:00
Scott Lahteine	e556ab1dff	Find three-point leveling points on Delta	2017-06-07 16:07:38 -05:00
Scott Lahteine	a27b08e6af	Various code style tweaks	2017-06-07 16:07:38 -05:00
Scott Lahteine	dac29e0f75	Cleaner failure of UBL without EEPROM	2017-06-07 16:07:38 -05:00
Scott Lahteine	9128d9ab45	Improve sanity checks with static_assert, organize	2017-06-07 16:07:38 -05:00
Scott Lahteine	6bb05c4543	Save 20b in smart_fill_mesh with PROGMEM	2017-06-07 16:07:38 -05:00
Scott Lahteine	b7dc4d9973	Save 92b PROGMEM, 14b SRAM with extruder auto fan	2017-06-07 16:07:38 -05:00
Scott Lahteine	c9e3caf928	Save lots of PROGMEM, ~20b SRAM with DIGIPOT_I2C	2017-06-07 16:07:38 -05:00
Scott Lahteine	4134a6b526	Save 88b PROGMEM, 48 bytes SRAM in settings.reset	2017-06-07 16:07:38 -05:00
Scott Lahteine	36cc03a9b4	Save 224b PROGMEM, 48b SRAM in get_homing_bump_feedrate	2017-06-07 16:07:38 -05:00
Scott Lahteine	2a41f0ff84	Save 28b PROGMEM in ultralcd.cpp (line_to_current)	2017-06-07 16:07:38 -05:00
Scott Lahteine	e6d10f6ddd	Spend 48b PROGMEM to save 16b SRAM ...by moving `homing_feedrate_mm_s` to PROGMEM.	2017-06-07 16:07:38 -05:00
Scott Lahteine	97e13a30ba	Save over 100 bytes SRAM in pin_is_protected	2017-06-07 16:07:38 -05:00
Scott Lahteine	45c74406cf	Recover 32 bytes of SRAM in Marlin bootscreen code	2017-06-07 16:07:38 -05:00
Scott Lahteine	e1c5a43247	Cleanup stepper current control config options	2017-06-07 16:07:38 -05:00
Scott Lahteine	efc198f952	Spacing, const, comments	2017-06-07 16:07:38 -05:00
Scott Lahteine	4406fba994	Fixes #6975	2017-06-07 11:14:30 -05:00
Scott Lahteine	d28f5d8a78	Fix: z_endstop_adj is never initialized	2017-06-07 10:29:56 -05:00
Scott Lahteine	5d5ff36446	Fix a compile error with _lcd_set_z_fade_height	2017-06-07 10:29:56 -05:00
Tannoo	b88957e0d4	Leveling type in About Printer Show the Leveling system in use on the About Printer screen.	2017-06-07 06:28:33 -06:00
Brian	dd071a4a65	Enable AUTO_REPORT_TEMPERATURES by default	2017-06-07 02:52:35 -04:00
bgort	8db1197c9b	Enable extended capabilities report by default (#6969 ) Ref #5139	2017-06-07 02:36:34 -04:00
bgort	82e662fc69	Remove requirement for LCD when UBL is used. (#6971 ) * Remove requirement for LCD when UBL is used. * fix previous oversights * further refinement - error messages for P2 & P4 * require R on G26 when not using LCD; default to all points	2017-06-07 02:24:36 -04:00
Tannoo	2c2b991b59	UBL Manual Build Menu Option (#6972 ) One click option to manually build UBL mesh.	2017-06-06 22:14:18 -05:00
Roxy-3D	0dd0033b33	Save up to 94 bytes of RAM on 20x4 LCD Display machines (#6964 ) * Save up to 94 bytes of RAM on 20x4 LCD Display machines Moved the custom screen characters out of RAM into Program Memory. With SD-Card support and the Progress Bar enabled, this saves 94 bytes of RAM memory. This was tested using the example_configurations/FolgerTech-i3-2020 files. So a couple small changes to those files snuck into this Pull Request. Probably... We can find similar savings in the Graphics LCD code it we comb through it. And if so... That is the place we really need to save RAM memory! * Tidy up white space and indentation	2017-06-05 17:02:00 -05:00
Bob-the-Kuhn	ba0bd33c38	Removed check for 2560 family	2017-06-04 22:16:27 -05:00
Scott Lahteine	04b07a6ecc	Unused var in Stepper	2017-06-04 17:25:16 -05:00
Scott Lahteine	eb8af486d2	Ensure safe temperature for M600	2017-06-04 17:25:16 -05:00
Scott Lahteine	bfe7fbe5c0	Maintain message scroll rate	2017-06-04 17:25:15 -05:00
Scott Lahteine	6411d65c48	Fix Morgan SCARA S2 calculation	2017-06-04 12:24:09 -05:00
Scott Lahteine	46752588b9	Merge pull request #6948 from Bob-the-Kuhn/redundant_temperature fix redefinition errors for redundant_temperature	2017-06-04 12:16:09 -05:00
Scott Lahteine	5938dae200	Merge pull request #6950 from MagoKimbra/fix_g29_3_point Fix G29 with 3 point	2017-06-04 12:15:44 -05:00
Scott Lahteine	c5e0f08e35	Merge pull request #6951 from fixoid/patch-4 Initializing extruder/nozzle servo when turning on the printer	2017-06-04 12:13:05 -05:00
Scott Lahteine	e4937b0285	Cleanup of spacing and formatting	2017-06-04 11:31:43 -05:00
fixoid	1aab9906e6	Initializing extruder/nozzle servo when when turning on the printer	2017-06-04 16:57:24 +03:00
MagoKimbra	663ff7f92a	Fix G29 with 3 point	2017-06-04 14:39:31 +02:00
oldmcg	9f295581f0	Ubl delta fixes and improvements (#6941 ) * Change all direct changes of ubl.state.active to set_bed_leveling_enabled() which handles apply/unapply leveling to maintain current_position consistency. Fix invalidation of UBL mesh to invalid unreachable mesh points as well (delta corners). Fix UBL_DELTA unapply_leveling logic and when it gets applied, including fade_height changes. Add optional M114 D for detailed position information, disabled from compilation by default (M114_DETAIL). * UBL_DELTA raw and inline kinematics * UBL planner fall through fix * consistent variable names * Cleanup orphaned code and whitespace changes. Use _O2. * compile warnings cleanup * Remove redundant #ifdef condition	2017-06-03 17:11:43 -05:00
Bob-the-Kuhn	c34d7a29a6	fix redefinition errors for redundant_temperature Removing redundant_temperature from public section and leaving it in the private section	2017-06-03 16:40:14 -05:00
Bob-the-Kuhn	6a5d3b580d	fix "hex_address not defined" when UBL is enabled	2017-06-03 13:19:55 -05:00
Scott Lahteine	789b2928a8	Tweak scrolling message code	2017-06-02 23:45:53 -05:00
Scott Lahteine	fc7d7f87b4	Init probe test pin with FastIO	2017-06-02 23:45:52 -05:00
Scott Lahteine	0282452cea	Make Parser::seen volatile	2017-06-02 23:45:52 -05:00
Scott Lahteine	9a305a467b	Patch LCD Contrast menu item	2017-06-02 23:45:52 -05:00
Scott Lahteine	90ccac4bcf	Clean up after recent commits	2017-06-02 23:45:52 -05:00
Bob-the-Kuhn	2130f10de8	allow space between parameter and value	2017-06-02 19:57:22 -05:00
Bob-the-Kuhn	ebda4663c3	for discusion	2017-06-02 19:42:43 -05:00
FATALHERMIT	911079104e	Support for ZRIB v2.0 Control Board	2017-06-02 12:05:46 -05:00
Scott Lahteine	65a0212866	Easier override of FILWIDTH_PIN	2017-06-02 12:05:46 -05:00
Scott Lahteine	147d9d76fc	Merge pull request #6928 from Bob-the-Kuhn/Fix-case-light-logic-on-Azteeg-X3-boards Fix case light logic on Azteeg_X3 boards.	2017-06-01 20:14:15 -05:00
guntherv73	4288c4fb4f	Configurations for Malyan M150	2017-06-01 19:26:29 -05:00
Scott Lahteine	1919cb0d1e	Config cleanups	2017-06-01 19:26:16 -05:00
Bob-the-Kuhn	9a9bbfc57c	Fix case light logic on Azteeg_X3 boards.	2017-06-01 12:33:24 -05:00
Thomas Moore	a32f7b329c	Fix heater status display for advanced pause	2017-06-01 12:29:47 -05:00
Scott Lahteine	445865ea03	REPRAPWORLD_KEYPAD is NEWPANEL but not ULTIPANEL	2017-05-31 23:48:03 -05:00
Scott Lahteine	4296a8b74e	For status scrolling, pad a short message	2017-05-31 23:48:03 -05:00
Scott Lahteine	4a96433b7e	Simplify counting of printable characters	2017-05-31 23:45:41 -05:00
Scott Lahteine	8d69394ae1	Fix LCD printing of progmem strings	2017-05-31 23:36:57 -05:00
Scott Lahteine	c74d4dede6	Prevent illegal leveling combinations Addressing issue #6901	2017-05-31 23:36:57 -05:00
Scott Lahteine	155aa62fb0	Merge pull request #6912 from thinkyhead/bf_better_pulse_delay Account for dual XYZ in pulse delay cycles estimate	2017-05-31 22:21:47 -05:00
Scott Lahteine	a5fa586642	Preferred patch to gcode.h	2017-05-31 21:18:16 -05:00
Bob-the-Kuhn	1b41e1f645	another compile error only seen if #if ENABLED(TEMPERATURE_UNITS_SUPPORT) ... #if ENABLED(ULTIPANEL) && DISABLED(DISABLE_M503)	2017-05-31 13:59:49 -05:00
Bob-the-Kuhn	65bd4c8c94	Merge pull request #6797 from Bob-the-Kuhn/M355-case-lightimprovements-(1.1.x) M355 case light improvements (replaces PR #5685)	2017-05-31 13:33:59 -05:00
Bob-the-Kuhn	9657e7d3ee	copied file changes from PR #5685 ============================== Configuration_adv.h changes ============================== add "live" LCD update ============================== P & S version ============================== final (hopefully) tested version ============================== update M115 capabilities print ============================== Menu changes portion of the requested changes ============================== changed USEABLE_HARDWARE_PWM from a function to a series of macros ============================== changes per review	2017-05-31 13:22:38 -05:00
Bob-the-Kuhn	8206bb9bb9	fix compile error invalid conversion from 'const char' to 'char' [-fpermissive]	2017-05-31 13:17:01 -05:00
Scott Lahteine	df91346188	Account for dual XYZ in pulse delay cycles estimate	2017-05-31 12:23:28 -05:00
Scott Lahteine	7236109f2a	Patch M24 / M125 for delta	2017-05-30 23:07:29 -05:00
Scott Lahteine	be17033762	Fix case light menu toggle	2017-05-30 14:03:45 -05:00
Scott Lahteine	89b93058e3	Merge pull request #6887 from christianh17/PR-sanitycheck enable DEACTIVATE_SERVOS_AFTER_MOVE with switching nozzle	2017-05-30 13:43:39 -05:00
Scott Lahteine	05b66234ae	Merge pull request #6895 from thinkyhead/bf_user_commands Custom user commands menu	2017-05-30 13:40:50 -05:00
Scott Lahteine	84a0a77c59	Merge pull request #6852 from tcm0116/mixing_extruder_lin_advance Generate error if MIXING_EXTRUDER and LIN_ADVANCE are both enabled	2017-05-30 13:37:51 -05:00
Scott Lahteine	266ae8912a	Formatting in _draw_heater_status	2017-05-30 03:32:16 -05:00
Scott Lahteine	6b9ca16f36	Patch lcd_print edge limit code	2017-05-30 03:32:15 -05:00
Tannoo	74d6dee920	User Command (Script) Menu The menu (commands / scripts) is configurable in `Configuration_adv.h`. - Added conditionals. - Changed script handling. - Slimmed and working! - Added Status message. - Returning to lcd status screen now! - Example Configs Updated. - Cleanups by @thinkyhead	2017-05-30 02:33:57 -05:00
Scott Lahteine	d9c8072037	Edit PROPORTIONAL_FONT_RATIO comment	2017-05-30 01:29:39 -05:00
Scott Lahteine	46b32e4548	Cleanup LCD interface, add lcd_reset_status	2017-05-29 22:16:13 -05:00
Scott Lahteine	ca99d67ede	Fix UBL "Info screen" menu items	2017-05-29 19:55:26 -05:00
Scott Lahteine	2c7a39bc0e	Fix LCD print aborted message	2017-05-29 19:52:01 -05:00
Scott Lahteine	0f1e8c195d	Draw on LCD after value has changed	2017-05-29 19:42:30 -05:00
Scott Lahteine	51587c4b43	Rename Feedrate to Velocity to match prior naming	2017-05-29 17:54:15 -05:00
Scott Lahteine	9677f3f2f5	Patch up LCD Bed Leveling menu	2017-05-29 17:51:11 -05:00
Scott Lahteine	fc2eaab7f3	Show home option in level bed menu	2017-05-29 17:51:10 -05:00
Scott Lahteine	c6a7adc293	Patch G29 A and Q arguments to bypass setup	2017-05-29 17:51:10 -05:00
Scott Lahteine	4cece2d72e	Use NAN for G29 W omitted parameters	2017-05-29 17:51:10 -05:00
Scott Lahteine	2d71569138	Fix spacing in JSON output	2017-05-29 17:51:10 -05:00
Scott Lahteine	b2d3c8aedd	Have G28 do a refresh of the display	2017-05-29 17:51:10 -05:00
Scott Lahteine	50ab9c2e04	General cleanup of spacing, comments	2017-05-29 15:34:14 -05:00
Scott Lahteine	f1e33afda4	Return to Bed Leveling menu when done	2017-05-29 15:31:02 -05:00
Scott Lahteine	78d8c598e1	Fix lcd_synchronize with message	2017-05-29 15:31:02 -05:00
Scott Lahteine	eb39d6e3e2	Don't draw progress bar until it has 1%	2017-05-29 15:31:01 -05:00
Scott Lahteine	194f8b2f55	Start at Z=0 in manual probing	2017-05-29 15:31:01 -05:00
Scott Lahteine	6f89db11f0	Allow lcd_setstatusPGM to reset the alert level	2017-05-29 15:31:00 -05:00
Scott Lahteine	3fe333143c	Case light as a toggle menu item	2017-05-28 14:32:07 -05:00
Scott Lahteine	d013bddfa8	Merge pull request #6876 from thinkyhead/bf_extend_leveling_menu Extend the ABL/MBL Bed Leveling menu	2017-05-28 14:19:02 -05:00
Scott Lahteine	01e7e234c6	Add more options to the Bed Leveling menu	2017-05-28 14:04:28 -05:00
Scott Lahteine	0cbe448edf	Split up Control > Motion submenu	2017-05-28 12:52:24 -05:00
Scott Lahteine	a3645ec921	Reference op with variable name	2017-05-28 11:33:22 -05:00
Scott Lahteine	71367fd518	Scrolling status message option	2017-05-28 11:26:28 -05:00
Scott Lahteine	b0eae68f57	Prevent bed temperature being set too high	2017-05-28 11:11:17 -05:00
Scott Lahteine	493f0b0c62	Fix some compiler warnings	2017-05-28 11:06:33 -05:00
christianh17	f379a326cc	enable DEACTIVATE_SERVOS_AFTER_MOVE with switching nozzle When using switching nozzle it should be possible to disable the servo after move. Do it only if you do not need the servo power to keep the position.	2017-05-28 15:33:28 +02:00
Scott Lahteine	33279a1e02	Code style tweak to gcode.h	2017-05-27 19:47:26 -05:00
Ernesto Martinez	ac959b12ee	Updates to language_es.h based on latest updates. (#6871 ) Spanish language updates	2017-05-27 19:08:39 -05:00
Scott Lahteine	55c700d537	Tweak to gcode.h	2017-05-26 22:11:31 -05:00
Bob-the-Kuhn	868e7db4ae	value check was looking at the code	2017-05-26 14:49:42 -05:00
Thomas Moore	fb5e0ffe16	Unify M600 and M125 pause features (#6407 ) * Unify M600 and M125 pause features * Cleanup per thinkyhead's comments * Rename filament_change_menu_response to advanced_pause_menu_response * Include HAS_BED_PROBE in QUIET_PROBING * Update gMax example file * is_idle() is out of scope without the braces * Convert FT-i3-2020 to Advance Pause names... * Allow pause even if not printing	2017-05-26 13:01:02 -05:00
Scott Lahteine	b3a97b5013	Patch up LCD level bed menus	2017-05-25 23:53:31 -05:00
Scott Lahteine	78af2b1444	Fix PROBE_MANUALLY via G-code	2017-05-25 23:53:31 -05:00
Scott Lahteine	082da23391	One fewer EOL in M503 output	2017-05-25 23:53:31 -05:00
Scott Lahteine	b15e531464	Fix screen change on character display	2017-05-25 15:29:14 -05:00
Thomas Moore	44e657766e	Add incompatibility error to Sanity Check for MIXING_EXTRUDER and LIN_ADVANCE	2017-05-25 08:06:27 -05:00
Scott Lahteine	735405b2a4	Merge pull request #6848 from thinkyhead/bf_scara_M665 Add M665 for SCARA	2017-05-24 20:51:51 -05:00
Scott Lahteine	ffa901f373	Merge pull request #6839 from thinkyhead/bf_day_ending_in_y UBL ultralcd.cpp patches	2017-05-24 17:55:44 -05:00
Scott Lahteine	361cbba113	Use M665 to set SCARA angle offsets	2017-05-24 17:49:24 -05:00
Scott Lahteine	5ed63a5724	Apply const in prepare_kinematic_move_to	2017-05-24 17:49:24 -05:00
Scott Lahteine	5cbe0244c5	Fixes for spindle/laser and SCARA probe bounds	2017-05-24 17:49:23 -05:00
Scott Lahteine	1f52c9f5df	Neater Megatronics 3 pins	2017-05-24 17:49:23 -05:00
Scott Lahteine	af81cb4cbb	Patch for M503 output	2017-05-24 17:49:09 -05:00
Scott Lahteine	1d167a6874	Some cleanup, fixes for ultralcd.cpp UBL code - Free up 30 bytes of SRAM in UBL LCD code - Fix BUILD_ABS_MESH temperature - Fix UBL indentation in ultralcd.cpp - UBL vars lowercase, "convert to positive" sensibly	2017-05-24 01:10:42 -05:00
Scott Lahteine	f4028fe088	New GCode Parser - Implementation	2017-05-23 14:15:10 -05:00
Scott Lahteine	002a06c507	New GCode Parser - Configuration	2017-05-23 14:15:07 -05:00
Scott Lahteine	ad915b667e	One more mesh_index_to_npos update Followup to #6827	2017-05-23 13:02:50 -05:00
Scott Lahteine	2881f0a48d	Fix, extend G42 with P (probe) parameter - Also fix handling of SCARA and misuse of `codenum`.	2017-05-23 04:55:42 -05:00
Scott Lahteine	d252d1b6a2	Merge pull request #6831 from thinkyhead/bf_move_g7 Move G7 to G42	2017-05-23 03:02:57 -05:00
Brian	82ca6248e2	Move G7 to G42 See: #6777	2017-05-22 23:21:35 -05:00
Scott Lahteine	26ffa558a3	Use redraw flag for both types of LCD	2017-05-22 18:34:54 -05:00
Scott Lahteine	3ff7515527	Merge pull request #6817 from cbusillo/patch-1 missing enable for M605 for duplication mode	2017-05-22 18:07:11 -05:00
Scott Lahteine	34cfbc90cd	Use new attribute macros in more places	2017-05-22 17:38:58 -05:00
Scott Lahteine	85b967657e	Embed G26/G29 in ubl class, with enhancements	2017-05-22 17:38:58 -05:00
Scott Lahteine	c99bd69889	Apply const float & more	2017-05-22 17:38:36 -05:00
Scott Lahteine	ad5638f78c	Cleanup some fastio code	2017-05-22 17:38:36 -05:00
Scott Lahteine	e271521c39	Single user_canceled function in G26	2017-05-22 17:38:36 -05:00
Scott Lahteine	c2ea22da49	Clean up whitespace	2017-05-22 17:38:36 -05:00
Scott Lahteine	ceb62fc7e1	Fixes #6828 : M428 bug	2017-05-22 17:34:03 -05:00
oldmcg	48f7652143	UBL G29 -P3.1 smart fill (#6823 ) * UBL G29 -P3.1 mesh fill with distance-weighted least squares fit. * Back to original -O0 on G29 for now.	2017-05-22 12:33:50 -05:00
Scott Lahteine	850203fb3a	Merge pull request #6816 from thinkyhead/bf_lcd_live_editing Constrain LCD status message rendering	2017-05-22 11:15:35 -05:00
Roxy-3D	3129260c44	Misc. Clean Up (#6822 ) * Misc. Clean Up Mostly UBL related clean up. - But fixed a bug in the thermistortables. - Made G26 more responsive to user aborts. - Added sanity checks for older name for UBL_MESH_VALIDATION. - Made G29 P4 able to edit invalidated mesh points - Restore a reasonable Fade Height for UBL when creating new state information - Get UBL's Topology Map to look a little bit better - Make sure the user doesn't see a blank screen when doing Mesh Editing. * Huh??? GitHub Desktop screwed up! * get the planner object in scope * Fix out of scope z_fade_height * Travis timed out... I need a change so I can force a new commit and sync.	2017-05-21 22:09:51 -05:00
cbusillo	3b4116e73b	missing enable for M605 for duplication mode I believe gcode_M605 will not be called when using DUAL_NOZZLE_DUPLICATION_MODE without this change.	2017-05-21 13:54:20 -04:00
Scott Lahteine	5e8892d6b5	Show Restore Failsafe item with EEPROM off	2017-05-21 12:52:44 -05:00
Scott Lahteine	76af9ac7c5	tweaks	2017-05-21 12:51:58 -05:00
Scott Lahteine	ba5910ab6c	Constrain LCD status message rendering	2017-05-21 12:35:16 -05:00
MagoKimbra	2c309a8f7c	Fix set_lcd_contrast	2017-05-21 19:01:44 +02:00
Scott Lahteine	22dbb2117c	Merge pull request #6812 from thinkyhead/bf_day_ending_in_y Cleanup code, organize & document fastio pin mappings	2017-05-21 11:39:04 -05:00
Roxy-3D	364f8fb613	Update Configuration.h files to better names (#6814 ) Changed UBL_G26_MESH_EDITING to UBL_G26_MESH_VALIDATION Added UBL_MESH_EDIT_MOVES_Z to prepare for that change (coming next)	2017-05-21 11:10:22 -05:00
Scott Lahteine	d7fda2fe49	Formatting, const in G33	2017-05-21 10:40:05 -05:00
Scott Lahteine	1519b0e7c1	Split up fastio.h, document pin mappings	2017-05-21 10:33:27 -05:00
Scott Lahteine	49599caade	General cleanup to utf_mapper.h	2017-05-21 10:33:27 -05:00
Scott Lahteine	02f15f6775	UBL-related cleanup, spacing, standards Reference: #6804	2017-05-21 10:33:26 -05:00
Scott Lahteine	52e20aeab3	Pins-related cleanup, formatting	2017-05-21 07:18:03 -05:00
Scott Lahteine	ea906e4da7	Merge pull request #6810 from thinkyhead/bf_lcd_live_editing Add "live editing" option to LCD menus	2017-05-21 06:11:52 -05:00
Scott Lahteine	11fc9564c9	Add live editing option to LCD menu	2017-05-21 05:29:46 -05:00
Scott Lahteine	8a0a5cfccc	Temp-related cosmetic changes	2017-05-21 04:49:25 -05:00
Scott Lahteine	b29dbbd5e4	Use uint16_t for temps	2017-05-21 04:48:53 -05:00
Scott Lahteine	ebcd1aaf88	Access hotend/bed temperatures as float	2017-05-21 04:46:31 -05:00
Scott Lahteine	6ce2b1ff4a	G33 evolutionary changes	2017-05-20 19:23:39 -05:00
Scott Lahteine	3c061a9f9a	UBL tabs, whitespace, spelling, etc.	2017-05-19 14:16:50 -05:00
Scott Lahteine	75badae2f8	Disable PROBE_MANUALLY for UBL Plus some other UBL tweaks.	2017-05-19 07:13:18 -05:00
Scott Lahteine	94a4af1d7f	Merge pull request #6773 from thinkyhead/bf_lcd_patch_e5 Patch LCD code for 5th extruder	2017-05-18 15:26:55 -05:00
Brian	01f452c37c	Tweak Azteeg X3 PRO _pins.h so Viki2 will work for those without a case light. - add comment explaining that the Panucatt Viki2 wiring diagram uses pin 44	2017-05-18 13:00:13 -04:00
Brian	e09b4ce4a5	Add checking	2017-05-17 19:46:16 -04:00
Brian	13599a73c7	Add `G7` gcode command to move between UBL mesh points - can be augmented in the future to enable for other leveling systems Quite simple, but did not want to modify `G1` as the additional checking would slow it down. Tested & working.	2017-05-17 19:05:36 -04:00
Brian	43c24f0027	Fix recent regressions, &c. - fix broken `M421` due to less-than-careful optimization - add HOME_AFTER_DEACTIVATE define to advanced config so not everyone has to rehome after steppers are deactivated - misc. cleanups (remove unused label, unused variables)	2017-05-17 17:21:46 -04:00
Scott Lahteine	3843a5151a	Patch LCD code for 5th extruder, EEPROM reset	2017-05-17 15:33:51 -05:00
Scott Lahteine	6c064bb7d6	Some probe_pt error-handling	2017-05-17 15:33:51 -05:00
Brian	3370329751	Fix broken EEPROM save/load	2017-05-17 12:41:27 -04:00
Scott Lahteine	f0fe26c411	Ensure Arduino.h and configs are included for serial.cpp	2017-05-17 05:07:35 -05:00
Scott Lahteine	ffb5353294	Merge pull request #6738 from thinkyhead/bf_config_crc_rebase Implement CRC16, develop mesh allocation table	2017-05-17 04:44:00 -05:00
Scott Lahteine	e806e6419a	Merge pull request #6768 from thinkyhead/rc_spindle_m3_m5 Spindle / Laser support	2017-05-17 04:39:32 -05:00
Scott Lahteine	d6f49c6626	Merge pull request #6752 from jdelahayes/bugfix-1.1.x Update french language	2017-05-17 04:32:28 -05:00
Scott Lahteine	55a87da036	SPINDLE/LASER implementation	2017-05-17 04:26:15 -05:00
Scott Lahteine	ffe0e2d19a	SPINDLE/LASER pins changes	2017-05-17 04:23:06 -05:00
Scott Lahteine	99c4900a98	SPINDLE/LASER config changes	2017-05-17 04:23:06 -05:00
Scott Lahteine	a3abfeac47	Mark strings needing translation	2017-05-17 03:49:33 -05:00
Scott Lahteine	7f4e4b1212	UBL name/state methods	2017-05-17 03:49:32 -05:00
Brian	7852369987	Implement CRC16, develop mesh allocation table - Add crc16 utility function - Implement CRC16 for config store, remove old checksum, increment layout version - Move UBL mesh store/load to MarlinSettings; increment UBL_VERSION - Begin to lay out MAT structure, prototype functions, etc. - Rename ubl.state.eeprom_storage_slot to .storage_slot - Misc. optimization - Cleanup/standardize/improve some messages This is a work in progress!	2017-05-17 03:49:19 -05:00
Scott Lahteine	00d358d92d	Fix a PROBE_MANUALLY bug in ultralcd.cpp	2017-05-17 03:49:19 -05:00
fixoid	c2321b1cdd	Separate SWITCHING_NOZZLE and SWITCHING_EXTRUDER	2017-05-16 19:25:17 -05:00
Scott Lahteine	238fb53617	Patch home_all_axes to ignore G28 XYZ parameters	2017-05-16 16:18:38 -05:00
Scott Lahteine	6b6630e11b	Clean up trailing whitespace and tabs	2017-05-16 16:06:18 -05:00
Roxy-3D	d30e478f97	Fix incorrectly optimized find_closest_mesh_point_of_type() function (#6761 )	2017-05-16 15:24:24 -05:00
oldmcg	5a9e52a3e0	Use COPY_XYZE macro to copy exactly 4 elements (#6758 ) Fix undefined DELTA_PROBEABLE_RADIUS for UBL_DELTA	2017-05-16 11:47:51 -05:00
Roxy-3D	8606644343	M48 Fix for Delta Configuration Files & UBL G29 only homes when necessary (#6757 ) * Fix M48 for Delta's There was a scope issue: DELTA_PROBEABLE_RADIUS wasn't getting defined. * Check if the specified G29 command requires homing	2017-05-16 11:23:50 -05:00
Tannoo	0cd398c25d	UBL Menu Updates (#6751 ) Things should be pretty stable for a while. But it wouldn't surprise me if the Delta people have a need for a few special commands.	2017-05-16 08:45:31 -05:00
Johann Delahayes	a5737cba7c	Update french language	2017-05-16 12:27:42 +02:00
Scott Lahteine	0fef9a2983	Remove "ubl." prefix from calls within ubl method	2017-05-16 01:19:45 -05:00
Scott Lahteine	14a4257c7b	UBL tabs, whitespace, spelling, etc.	2017-05-16 01:19:45 -05:00
Scott Lahteine	56e2e331ed	UBL G29: replace 'O' with 'T' Since we already used 'T' for `G29` Topology Report in the past, and since 'T' is available…	2017-05-16 01:18:41 -05:00
Scott Lahteine	091f94a6bf	Fix up M421 and some comments	2017-05-16 01:14:03 -05:00
Scott Lahteine	4ec4ecff1a	Reduce find_closest_mesh_point_of_type a little	2017-05-16 01:14:03 -05:00
Scott Lahteine	f1a1c6873e	Patch lcd_implementation_status_screen compiler warning	2017-05-16 00:59:50 -05:00
moebyusDev	2266c0780d	fixed spanish lang It was missing MSG_FILAMENT_CHANGE_HEAT_2 and MSG_FILAMENT_CHANGE_HEATING_2	2017-05-16 00:35:36 -05:00
oldmcg	b213a45efb	UBL_DELTA post merge cleanup (#6705 ) * UBL_DELTA post merge cleanup: fix fade_height, lost during some previous merge fix float cx,cy which are not const move repeated z_cxcy calc line inside loop style fixes and comment fixes/alignment * Update ubl_motion.cpp remove unnecessary parentheses * Update Conditionals_post.h Change name of define to more accurate meaning: UBL_GRANULAR_SEGMENTATION_FOR_CARTESIAN which is not and should not be the default for cartesians with UBL.	2017-05-16 00:30:29 -05:00
Roxy-3D	6f86c46fa6	Fix typo that caused scope issues for DELTA (#6750 )	2017-05-15 23:13:45 -05:00
Roxy-3D	1fbcbc05f6	UBL no longer flout's the sacred GCode standard (#6745 ) Also clean up ubl_motion.cpp debug info and fix declaration of cx & cy	2017-05-15 16:25:01 -05:00
Scott Lahteine	c262ea92e0	Merge pull request #6733 from abusca/Euskera Updated Basque translation	2017-05-15 02:30:11 -05:00
Scott Lahteine	267f77b18b	More constraint on axis_unhomed_error	2017-05-14 16:03:02 -05:00
Aaron Busca	645096b87a	Updated Basque translation Updated Basque translation with new strings.	2017-05-14 18:29:50 +02:00
Roxy-3D	40d95a4e23	Update the gMax files to display better with Proportional Fonts (#6727 ) Update the gMax files to display better with Proportional Fonts	2017-05-13 16:33:04 -05:00
Roxy-3D	c06af63f87	G26's default behaviour ought to be the entire mesh (#6726 ) Adding the capability to specify ahead of time how much of the validation pattern to print made it so by default G26 only did one circle and no connecting lines. It is more natural for the unsophisticated user to just do the entire mesh (bed). We default the repetition count to GRID_MAX_POINTS+1 to insure we get every last one of them!	2017-05-13 15:53:44 -05:00
Roxy-3D	15040821e0	Setup FolgerTech-i3-2020 files better for the user (#6724 ) UltiPanel was enabled, but technically, it is a REPRAP_DISCOUNT_SMART_CONTROLLER Either configuration works on the machine. But we want it 'Right'. Setup the Proportional Font spacing so columns line up nicer on PronterFace and Repetier Host.	2017-05-13 15:14:03 -05:00
Scott Lahteine	67c9b1e332	Update M665 comment, fix M665 code_value code.	2017-05-13 05:11:29 -05:00
Scott Lahteine	37399e3cb5	Fix prepare_move_to_destination_cartesian for UBL	2017-05-13 04:13:19 -05:00
Scott Lahteine	a7fb55ea6d	Use GRID_MAX_POINTS. Some formatting	2017-05-12 06:57:19 -05:00
Scott Lahteine	e51b5774db	Merge pull request #6699 from mtowara/patch-1 Bugfix PRINTER_EVENT_LEDS	2017-05-12 05:58:25 -05:00
Scott Lahteine	056350d9bf	Merge pull request #6656 from FHeilmann/fix_fwretract_pos_z_move Fix FWRetract with positive z-moves during retracted state	2017-05-12 05:56:08 -05:00
Scott Lahteine	0e582bcfb7	Fix #6691 - redundant line in M665	2017-05-12 05:17:38 -05:00
Markus Towara	68ae7c8d7a	Bugfix PRINTER_EVENT_LEDS Extra closing curly bracket terminates while loop early if PRINTER_EVENT_LEDS defined	2017-05-12 12:13:23 +02:00
Scott Lahteine	ba29da56e0	Add disclaimer for verboten parameters	2017-05-12 02:34:53 -05:00
Scott Lahteine	0696dda470	Cleanups to UBL_DELTA	2017-05-12 02:34:53 -05:00
Scott Lahteine	cbfca29522	M421 tweaks, just to use const	2017-05-12 01:32:34 -05:00
Scott Lahteine	233f824dd6	Define GRID_MAX_POINTS	2017-05-12 01:32:34 -05:00
Scott Lahteine	b17e2d3dcd	Apply const in Marlin_main.cpp	2017-05-12 01:32:33 -05:00
Scott Lahteine	92fbea2906	Add some GCodes to the header of Marlin_main.cpp	2017-05-12 01:32:33 -05:00
Scott Lahteine	94e90ca26c	Tweak M80/M81 descriptions	2017-05-12 01:32:33 -05:00
Scott Lahteine	ee50dfaaf3	Adjust G26 arguments	2017-05-12 01:32:33 -05:00
Scott Lahteine	b0ba5cae73	Fix a spelling boo	2017-05-12 01:32:33 -05:00
oldmcg	91841d75c9	UBL_DELTA (#6695 ) UBL on Delta's.... Should be close! Should not affect any Cartesian printer.	2017-05-11 22:33:47 -05:00
bgort	445003dbb8	Merge pull request #6694 from bgort/g29p2b UBL: Minor improvement to G29 P2	2017-05-11 20:44:43 -04:00
Brian	5a5dba6fc8	UBL: Minor improvement to G29 P2 - allow H code value to override probing height - minor cleanups	2017-05-11 18:54:34 -04:00
Brian	ae676490c9	M421: Add 'adjust closest point' capability - Split M421 into separate versions for bilinear and ubl - Fix minor issue in G26	2017-05-11 12:10:38 -04:00
Scott Lahteine	9a688d1456	Merge pull request #6682 from thinkyhead/bf_M80_s_arg "M80 S" to report the state of the PSU pin	2017-05-10 20:29:01 -05:00
Roxy-3D	b63e82f309	M421 Mesh Point Offset and misc. UBL clean up (#6685 ) * M421 Mesh Point Offset and misc. UBL clean up Allow M421 to accept an offset as well as absolute value for a specified mesh point. And misc. UBL clean up to reduce redundent code. * Better error checking for M421 * Fix M421 Y index bug I just noticed.... We've had a Y index bug for who knows how long?	2017-05-10 18:54:10 -05:00
Pablo Ventura	539e0c2f31	"M80 S" to report the state of the PSU pin	2017-05-10 17:58:58 -05:00
bgort	df42428281	Merge pull request #6665 from bgort/font Add proportional font adjustment ratio	2017-05-10 17:30:51 -04:00
Brian	2604742191	Add proportional font adjustment ratio - update example configs	2017-05-10 17:19:03 -04:00
bgort	b3407a371b	Merge pull request #6676 from bgort/g26zhop G26: Add 0.5mm Z-bump between circles to minimize pattern scraping	2017-05-10 17:12:05 -04:00
bgort	c33d99c5b2	Merge pull request #6680 from bgort/g26repeat G26: Add 'Repeat' Option	2017-05-10 17:11:34 -04:00
Bob-the-Kuhn	7325035aac	Merge pull request #6637 from Tannoo/UBL_Menu_System_1.1 UBL Menu System 1.1	2017-05-10 15:54:48 -05:00
Brian	f7a201b0d0	G26: Add 'Repeat' Option - Allows for specifying number of points to print/validate, using 'R' code like with G29 P4 Rx - Moved the code for Random to 'M' so we could be consistent with G29 P4 - G26 instructions indenting/cleanup	2017-05-10 16:52:08 -04:00
Brian	9c5957fc77	G26: Add 0.5mm Z-bump between circles to minimize pattern scraping	2017-05-10 16:11:59 -04:00
Brian	4da14b14f4	UBL Cleanup/Bugfix - Fix bug in ubl_line_to_destination - Improve/fix output of some ubl.h functions	2017-05-10 13:56:17 -04:00
Tannoo	66db6c3acc	UBL Menu System 1.1 /** * UBL System submenu * * Prepare * - Unified Bed Leveling * - Activate UBL * - Deactivate UBL * - Mesh Storage * Memory Slot: * Load Bed Mesh * Save Bed Mesh * - Output Map * Map Type: * Output Bed Mesh Host / Output Bed Mesh CSV * - UBL Tools * - Build Mesh * Build PLA Mesh * Build ABS Mesh * - Build Custom Mesh * Hotend Temp: * Bed Temp: * Build Custom Mesh * Info Screen * - Build Cold Mesh * - Fill-in Mesh * Fill-in Mesh * Smart Fill-in * Manual Fill-in * Info Screen * Continue Bed Mesh * Invalidate All * Invalidate Closest * - Validate Mesh * PLA Mesh Validation * ABS Mesh Validation * - Custom Mesh Validation * Hotend Temp: * Bed Temp: * Validate Mesh * Info Screen * - Edit Mesh * Fine Tune All * Fine Tune Closest * - Adjust Mesh Height * Height Amount: * Adjust Mesh Height * Info Screen * - Mesh Leveling * 3-Point Mesh Leveling * - Grid Mesh Leveling * Side points: * Level Mesh * Info Screen * - Output UBL Info */	2017-05-10 12:14:43 -05:00
Brian	3b0127cf8e	Fix compiler complaint related to M100	2017-05-09 21:45:44 -04:00
Scott Lahteine	11104f177b	Apply const in BABYSTEPPING	2017-05-09 12:37:23 -05:00
Scott Lahteine	081bf1f879	Patch #else / #endif comments	2017-05-09 12:37:23 -05:00
Scott Lahteine	a9487c9443	Reduce redundancy in BLTOUCH conditionals	2017-05-09 11:52:24 -05:00
Scott Lahteine	8d961b51cc	Eliminate M100 compiler warnings?	2017-05-09 11:32:15 -05:00
bgort	efb9ce24d9	Merge pull request #6645 from tcm0116/bltouch_config Automatically define Z_MIN_PROBE_ENDSTOP_INVERTING for BLTouch	2017-05-09 09:49:16 -04:00
bgort	e2f07917ab	Merge pull request #6644 from tcm0116/bltouch_menu Move BLTouch LCD menu from Main to Main/Control	2017-05-09 09:49:02 -04:00
Florian Heilmann	fe96376a73	Fix FWRetract with positive z-moves during retracted state	2017-05-09 13:54:57 +02:00
Scott Lahteine	47cae2929f	Patch platformio.ini to fix build error in DevIoT For compatibility with DevIoT, until that can be solved.	2017-05-08 20:27:14 -05:00
Scott Lahteine	911a87e006	Disable SCARA feedrate scaling by default	2017-05-08 14:41:03 -05:00
Scott Lahteine	71396f77d3	Cleanups following recent commits	2017-05-08 14:23:01 -05:00
Scott Lahteine	dca48f0e63	Move platformio.ini back to Marlin folder - it works there	2017-05-08 14:23:01 -05:00
Scott Lahteine	a6dafb058e	Small reduction in error code size	2017-05-08 13:58:09 -05:00
Scott Lahteine	a1e04942a2	Cleanup to software PWM variables	2017-05-08 13:51:45 -05:00
Thomas Moore	a20d0794e6	Automatically define Z_MIN_PROBE_ENDSTOP_INVERTING for BLTouch	2017-05-08 16:28:44 +00:00
Thomas Moore	3279337f47	Move BLTouch LCD menu from Main to Main/Control	2017-05-08 15:21:01 +00:00
Brian	6cb0fa4128	Cleanup previous implementation of new quiet probing Saves a few lines of code.	2017-05-08 08:13:46 -04:00
bgort	4b7f8ad9c6	Merge pull request #6610 from bgort/pio-improvements2 PlatformIO-related changes	2017-05-08 07:52:42 -04:00
Scott Lahteine	56ca47ab9d	Patch configuration temp units	2017-05-07 21:32:01 -05:00
Scott Lahteine	421dd62800	Adjust spacing of "spaces"	2017-05-07 21:28:54 -05:00
Scott Lahteine	26dba44cd3	Patch redundant lcd settings	2017-05-07 21:28:54 -05:00
Scott Lahteine	34b5041576	Spacing adjustment, ubl_G29	2017-05-07 21:28:54 -05:00
Scott Lahteine	1c4ed8b106	Note 5 extruders in config comments	2017-05-07 21:28:54 -05:00
Scott Lahteine	6e4a5cc8c6	Patch missing const in temp_abs	2017-05-07 21:13:44 -05:00
bgort	d35e2fda10	Merge pull request #6622 from bgort/silentprobing Improve BLTOUCH_HEATERS_OFF functionality	2017-05-07 21:33:44 -04:00
Scott Lahteine	6ed52fb765	Adjust spacing in LSF	2017-05-07 19:11:52 -05:00
Roxy-3D	110afff415	More misc UBL fixes and update gMax examples (#6632 ) I think I forgot to Sync before I committed last time. Some UBL changes did not stick. Also, update the gMax configuaration.h file so other than unique numbers and settings, it exactly matches the default configuration.h file.	2017-05-07 19:02:24 -05:00
Roxy-3D	d92fa40c62	misc. UBL fixes (#6631 ) * Restore LSF functionality Some of the typo's persisted... Hopefully this gets them all fixed. * Restore user's expectations of how G28 should behave * Allow Nozzle size control with ornery host programs	2017-05-07 18:23:48 -05:00
Brian	faa270071d	Improve BLTOUCH_HEATERS_OFF functionality - rename to PROBING_HEATERS_OFF - move heater pausing functionality into thermalManager - add variables, pause(), ispaused(), other functions - add fan pausing functionality -> PROBING_FANS_OFF - add probing_pause() wrapper - move pausing into do_homing_move() and do_probe_move() to minimize quiet time and so other probe types can benefit - example configs	2017-05-07 16:22:08 -04:00
lrpirlet	d66e9efac5	G29 P1 stops reporting Invalid location with this patch	2017-05-07 15:07:26 +02:00
Scott Lahteine	ce507deb9f	Support temperature units in M503	2017-05-06 20:24:51 -05:00
bgort	a59066bca9	Various improvements - mostly UBL-related (#6607 ) UBL Clean up.	2017-05-06 18:59:16 -05:00
Brian	0446dd3ad8	PlatformIO-related changes - move platformio.ini out of source directory to be more consistent with 'normal' PlatformIO usage - facilitates IDE integration - add related .gitignores	2017-05-06 06:22:10 -04:00
Scott Lahteine	77769e284f	Edit configuration comments	2017-05-05 13:32:31 -05:00
Scott Lahteine	6876e79d42	Tweak command index increment	2017-05-05 13:32:31 -05:00
Scott Lahteine	7fcb5c1424	Minor fix in K8200 readme	2017-05-05 11:25:11 -05:00
Max Matveev	267f3a03d9	Fixed USE_CONTROLLER_FAN #define usage	2017-05-04 23:38:29 +02:00
bgort	ae7c602031	fix error in M105 output -- use SERIAL_PROTOCOL for ints instead of SERIAL_PROTOCOL_F (#6584 ) also removed wayward 'address of' ampersand in setTargetHotend and setTargetBed parameters	2017-05-04 16:09:45 -05:00
Scott Lahteine	3cd9af2409	bugfix-1.1.x ReadMe, Version, helper scripts	2017-05-04 07:17:10 -05:00
Florian Heilmann	15268770f5	Fix broken fwretract recovery extruder feedrate When both lowering and recovery are performed using the same "prepare_move_to_destination()" the extruder recovery feedrate ends up being ignored and, instead, is only capped by either the maximum e-speed or the time it takes to perform the z-lowering. Performing the two moves separately from each other ensures a correct recovery feedrate.	2017-05-04 11:34:28 +02:00
Scott Lahteine	58210c3a19	Merge pull request #6568 from thinkyhead/rc_bilinear_extension Add EXTRAPOLATE_BEYOND_GRID option to bilinear leveling	2017-05-04 00:46:05 -05:00
Scott Lahteine	da08e11acd	Add EXTRAPOLATE_BEYOND_GRID option to bilinear leveling	2017-05-04 00:19:07 -05:00
Scott Lahteine	6834e36871	Merge pull request #6567 from thinkyhead/rc_sdcard_stop Shutdown heaters, autotemp on SD Cancel	2017-05-03 23:54:29 -05:00
Scott Lahteine	399efd66ed	Click to resume	2017-05-03 22:26:06 -05:00
Scott Lahteine	1196e3ca59	SDCard print completion can use "M0"	2017-05-03 22:24:03 -05:00
Scott Lahteine	6854f08d22	Shut down autotemp in disable_all_heaters	2017-05-03 20:54:26 -05:00
Thomas Moore	acec237092	Shutdown heaters and fan after canceling a print from the SD card	2017-05-03 20:43:09 -05:00
Scott Lahteine	11b6a3cbb6	Fix regression in least_squares_fit.cpp	2017-05-03 19:21:44 -05:00
Scott Lahteine	e1b85ff67b	Merge pull request #6559 from thinkyhead/rc_more_optimal Compact smart_fill_mesh slightly	2017-05-03 19:07:36 -05:00
Scott Lahteine	9890141f7b	M100 tweak	2017-05-03 17:28:09 -05:00
Scott Lahteine	2658cc707a	Treat temperature as integer, when possible	2017-05-03 17:27:25 -05:00
Scott Lahteine	1b2c7ec20a	Make G26 compatible with inches and thermal unit modes	2017-05-03 17:12:48 -05:00
Scott Lahteine	241bdffe65	Dress up Bilinear Leveling code	2017-05-03 17:12:35 -05:00
Scott Lahteine	67ecf06cc4	Patch issue in gcode_M900 Noted in #6550	2017-05-03 15:26:00 -05:00
Scott Lahteine	de5e485ed7	Explicit upward angle solution	2017-05-03 01:19:44 -05:00
Scott Lahteine	ecdf68735f	Compact smart_fill_mesh slightly	2017-05-03 01:06:58 -05:00
Scott Lahteine	628391304f	Merge pull request #6552 from thinkyhead/rc_more_ubl_cleanup Further cleanup of UBL	2017-05-02 22:46:04 -05:00
Scott Lahteine	902fe76db9	Merge pull request #6556 from thinkyhead/rc_use_controller_fan Implement USE_CONTROLLER_FAN as a feature	2017-05-02 22:43:26 -05:00
Scott Lahteine	7ba7474a73	Drop extra parens from address-of operator	2017-05-02 22:22:23 -05:00
Scott Lahteine	0bf5add075	Use UBL_MESH_(MIN\|MAX)_[XY] for G29 move limits	2017-05-02 22:22:23 -05:00
Scott Lahteine	b8ba3b7647	Use 'sq' macro where possible	2017-05-02 22:22:23 -05:00
Scott Lahteine	66eba3346b	Remove G29 lcd control debugging	2017-05-02 22:22:23 -05:00
Scott Lahteine	3517154135	Reduce code size, fix bug in smart_fill_mesh	2017-05-02 22:22:23 -05:00
Scott Lahteine	c4e34adcf1	Apply formatting, coding standards to UBL	2017-05-02 22:22:23 -05:00
Scott Lahteine	f4239e62b1	Merge pull request #6557 from thinkyhead/rc_hotend_status_item Keep refreshing LCD if hotend status is on-screen	2017-05-02 22:04:21 -05:00
Scott Lahteine	fc857c5b78	Merge pull request #6549 from thinkyhead/rc_bltouch_refix Fix BLTOUCH_HEATERS_OFF bug	2017-05-02 21:53:09 -05:00
Thomas Moore	b39f634252	Continuously update LCD when hotend status is displayed in Filament Change screens	2017-05-02 21:49:40 -05:00
Scott Lahteine	2c13922c46	Implement USE_CONTROLLER_FAN as a feature	2017-05-02 20:18:52 -05:00
Scott Lahteine	492bc536bf	Modify debug methods to take PSTR	2017-05-02 17:53:40 -05:00
Bob-the-Kuhn	e5a27d9f36	G29 P2 & P4 bug fixes & improvements	2017-05-02 17:53:40 -05:00
Scott Lahteine	b93be716cf	Remove trailing whitespace	2017-05-02 17:53:40 -05:00
Scott Lahteine	76eca9732d	Fix mis-named language string define in Dutch	2017-05-02 16:08:09 -05:00
Scott Lahteine	806f670092	Merge pull request #6511 from Bob-the-Kuhn/UBL--G26-minor-improvements UBL: G26 minor improvements	2017-05-02 16:06:22 -05:00
Scott Lahteine	0803c9d997	Merge pull request #6533 from thinkyhead/rc_autocal_patches General cleanup of G33	2017-05-02 16:01:02 -05:00
Brian	ff5fed137f	Fix BLTOUCH_HEATERS_OFF bug	2017-05-02 15:53:52 -05:00
Scott Lahteine	ca1dd739a3	Organize ubl.h defines by the files they serve	2017-05-02 15:47:06 -05:00
Scott Lahteine	0449f69179	Cleanup patch to recent merge	2017-05-02 15:47:06 -05:00
LVD-AC	da2abad636	Various cleanups of G33 - update comment section - redefined P5 grid - minor clean to probe radius routine - updated EEPROM version to V37 according remark in #6517	2017-05-02 15:47:06 -05:00
Bob-the-Kuhn	7ce613db0a	Fix Conditionals test for endstop plug used by Z2 or probe.	2017-05-02 15:41:47 -05:00
Scott Lahteine	ef750ae86b	Towards supporting Z2 in Endstops::report_state	2017-05-02 15:39:32 -05:00
Scott Lahteine	c03c623951	Sanity-check Z2 endstop assigned to a nonexistent pin.	2017-05-02 15:39:00 -05:00
Scott Lahteine	70f31b6c76	Throw an error if no E stepper is free for X2, Y2, Z2	2017-05-02 15:13:47 -05:00
Scott Lahteine	ac69eca586	Merge pull request #6538 from bgort/ubl_gridlbls Fix, cleanup, prettify `G29 O` output	2017-05-02 14:09:18 -05:00
Scott Lahteine	99b11db1a1	Merge pull request #6537 from thinkyhead/rc_cleanup_sunday Various leveling-related patches	2017-05-02 00:59:59 -05:00
Roxy-3D	41e63bbb7c	Fix Horizontal and Vertical UBL optimization bug. (#6540 ) * Fix Horizontal and Vertical optimization bug. And drastically reduce the debug code foot print.... * Yeah Baby! The debug print is going A - OK !	2017-05-01 23:52:33 -05:00
Scott Lahteine	e79b335367	Patches for leveling reactivation in G28 / M48	2017-05-01 17:38:57 -05:00
Brian	92e22c3bf2	Fix, cleanup, prettify `G29 O` output	2017-05-01 18:19:57 -04:00
Scott Lahteine	7d5cd7e0d7	Tweak set_bed_leveling_enabled	2017-05-01 16:46:52 -05:00
Scott Lahteine	ed81e9b3d3	Adjust leveling conditionals	2017-05-01 16:46:48 -05:00
Scott Lahteine	a64e5659ce	Clean up G26 external references, private vars	2017-05-01 15:17:52 -05:00
Scott Lahteine	2887c20788	Add a function to home all axes (i.e., gcode_G28)	2017-05-01 15:03:37 -05:00
Scott Lahteine	8f895d5e01	Merge pull request #6530 from thinkyhead/rc_cleanups_2 Fixes for DUAL_NOZZLE_DUPLICATION_MODE	2017-05-01 12:34:11 -05:00
Scott Lahteine	8002672938	Fixes for DUAL_NOZZLE_DUPLICATION_MODE	2017-05-01 12:20:25 -05:00
Scott Lahteine	f69acde966	Merge pull request #6528 from MarlinFirmware/revert-6416-negative-mesh-fix Revert "Fix for Meshpositions if printer has negative endstop positions"	2017-05-01 11:51:13 -05:00
Scott Lahteine	4803a4322e	Revert "Fix for Meshpositions if printer has negative endstop positions"	2017-05-01 11:25:07 -05:00
Scott Lahteine	4f74c416a4	Patch for BLTOUCH_HEATERS_OFF	2017-05-01 11:13:40 -05:00
Scott Lahteine	1823a6ea29	Patch for missing DELTA_HEIGHT	2017-05-01 11:05:35 -05:00
Scott Lahteine	d814e468d2	Fix set_heaters_for_bltouch and usage - Only call `set_heaters_for_bltouch` when actually deploying/stowing - Clear `next_emi_protection` when re-enabling heaters	2017-05-01 02:27:52 -05:00
Brian	4e1448e75a	Various fixes for compiler warnings add BLTouch-related messages in english and (rusty) french; add missing endstops.h in ultralcd.cpp; fix misc. compiler warnings; fix lsf_reset - ZERO macro can't handle a pointer as it would only memset the size of the pointer, not the size of the entire struct	2017-05-01 02:12:40 -05:00
Scott Lahteine	fc9919b749	Merge pull request #6515 from thinkyhead/rc_cleanup_sunday Some minor cleanups to code formatting	2017-04-30 22:58:16 -05:00
Scott Lahteine	c12bc51a59	cardreader.cpp spacing tweak	2017-04-30 22:27:47 -05:00
Scott Lahteine	46b714a52f	Cleanup spacing in pinsDebug.h	2017-04-30 22:27:26 -05:00
Scott Lahteine	88141ca717	Remove things that aren't pins from pinsDebug_list.h	2017-04-30 22:24:51 -05:00
Scott Lahteine	ff35b11d08	Resolve compiler complaint about memset volatile *	2017-04-30 22:24:03 -05:00
Scott Lahteine	0b421e97c9	Rename some (unused) OMCA pins	2017-04-30 22:16:44 -05:00
Scott Lahteine	c2c9f01c8e	Patch newly-introduced bug in IS_Z2_OR_PROBE	2017-04-30 20:17:10 -05:00
Scott Lahteine	819df5e06d	Cleanups to pins debugging	2017-04-30 20:17:10 -05:00
Scott Lahteine	42824b0e1f	Use new serial spacing function to save PROGMEM	2017-04-30 20:14:42 -05:00
Scott Lahteine	cd72901fb7	Cleanups to UBL code	2017-04-30 20:14:42 -05:00
Bob-the-Kuhn	ce87c7803e	implement G26 changes per review	2017-04-30 19:05:25 -05:00
jaysonkelly	769817ce5e	Need to define this for Rigidboard V2 Motor current defaults need to be defined for Rigidboard	2017-04-30 19:04:27 -05:00
Scott Lahteine	39c6c5621b	Merge pull request #6416 from SkyNet3D/negative-mesh-fix Fix for Meshpositions if printer has negative endstop positions	2017-04-30 17:38:41 -05:00
Scott Lahteine	671a44b8aa	Merge pull request #6410 from teemuatlut/LVD-Delta Delta auto-calibration updates	2017-04-30 16:39:51 -05:00
Scott Lahteine	5d5c9a040a	Merge pull request #6509 from thinkyhead/rc_config_patches Configuration cleanup	2017-04-30 16:10:27 -05:00
Scott Lahteine	d480b6f75a	Enable E1 stepper for DUAL_NOZZLE_DUPLICATION_MODE	2017-04-30 16:01:01 -05:00
Bob-the-Kuhn	dcde202157	Add startup notice & update host temperatures while waiting Right now G26 doesn't send a notice to the host that it's running. It's not until the heaters are at temperature that you know for sure if it's running or not. Added host temperature prints so that someone watching the host interface will see the temperatures change during the warm up period. Updates are sent every 5 seconds.	2017-04-30 15:51:58 -05:00
Scott Lahteine	54751e8557	Put DISTINCT_E_FACTORS adjacent to the affected settings	2017-04-30 15:30:31 -05:00
Scott Lahteine	0dbe4b3e54	Edit configurations to reduce verbosity, arrange logically	2017-04-30 15:30:31 -05:00
Scott Lahteine	0750933bc6	Merge pull request #6490 from Bob-the-Kuhn/Missing-X-stop Endstop not enabled if pin is zero	2017-04-30 15:09:36 -05:00
bgort	5ace3699b1	Output (commented) coordinates on G29 S-1; helps identify the x/y points that correspond with i/j coordinates, which eases manual tweaking of z values (#6507 )	2017-04-30 14:59:34 -05:00
Scott Lahteine	d7d4378481	Remove inaccurate version description	2017-04-30 14:57:19 -05:00
Scott Lahteine	f169c04604	Merge pull request #6491 from thinkyhead/rc_cleanup_wednesday Various cleanups for recent merges	2017-04-30 14:56:48 -05:00
Scott Lahteine	6d63255ddc	Merge pull request #6508 from bgort/pio_improvements PlatformIO-related improvement	2017-04-30 14:53:22 -05:00
LVD-AC	cafc48dff8	little oops	2017-04-30 22:17:49 +03:00
Brian	627730948d	Add U8glib as a dependency to platformio.ini for those who use PlatformIO; this makes compiling even easier as u8glib will be downloaded and included automatically. Also added the new .pio-related directory to .gitignore, and a few ignores for those who use cmake.	2017-04-30 15:13:51 -04:00
bgort	5974d8e168	change G26 default nozzle size to 0.4, consistent with instructions (#6506 )	2017-04-30 13:23:46 -05:00
LVD-AC	471a321624	leaner code for probe routine	2017-04-30 19:15:16 +03:00
bgort	3c0d5ba0a1	allow idle() to be called - fixes sometimes crash/hang in G29 I; (#6505 )	2017-04-30 10:22:31 -05:00
Roxy-3D	2509587b5a	Correct over optimization of pre-initialized variables (#6500 ) * Correct over optimization of pre-initialized variables NEAR_ZERO() works most of the time... But it leaves corner cases uncovered. We need to explicitly check if these variables are +/- infinity. * Correct over optimization of pre-initialized variables	2017-04-29 22:01:29 -05:00
LVD-AC	585c00a728	Proposed changes This is what I did yesterday: - basicly gave the tests more comprehensive names; put all the declarations at the top; got rid of the magic negative C-value (renamed to P + A, O, T) - "cos(RADIANS(180 + 30 * axis)) * (1 + circles * 0.1 * ((zig_zag) ? 1 : -1)) * delta_calibration_radius" compiles wrong is zig_zag statement is without brackets - DELTA_TOWER_ANGLE_TRIM reset to 3 values (the calcs use the 3th value to normalize will not compile otherwise) -Wrote 3 dummies to keep EEPROM lenght the same -Reset the configs to the 'original' with autocal + menu disabled (but can be enabled of course)	2017-04-29 18:53:14 +03:00
Scott Lahteine	29fa241617	Initial patches to G33	2017-04-29 15:29:49 +03:00
Scott Lahteine	12ce051b55	Add a function to output spaces to serial	2017-04-29 15:29:49 +03:00
Scott Lahteine	42f4c53254	Starting on G33 rewrite	2017-04-29 15:29:49 +03:00
Scott Lahteine	baf3b91460	DELTA_TOWER_ANGLE_TRIM only needs AB	2017-04-29 15:29:49 +03:00
emartinez167	27cd165adf	Last three Spanish language strings Updates as per @thinkyhead request.	2017-04-29 11:33:30 +08:00
Scott Lahteine	2cc9774f34	Apply bltouch_menu As proffered in #6252	2017-04-28 18:43:03 -05:00
Scott Lahteine	1a111180de	Clean up set_heaters_for_bltouch	2017-04-28 18:32:39 -05:00
Scott Lahteine	7db805930a	Cleanup configurations	2017-04-28 18:32:39 -05:00
Scott Lahteine	8bf3a3fcdb	Remove inaccurate comments from ubl.h	2017-04-28 18:32:38 -05:00
Scott Lahteine	47557d5a19	Fix up formatting in ubl.h	2017-04-28 18:32:38 -05:00
Scott Lahteine	0a8e09c723	Clean up excess whitespace, comment formatting	2017-04-28 18:32:38 -05:00
Scott Lahteine	a35c681453	Clean up least_squares_fit	2017-04-28 17:33:28 -05:00
Bob-the-Kuhn	40089249c3	add PIN_EXISTS to HAS_xyz_MIN macro	2017-04-28 16:47:59 -05:00
Scott Lahteine	8020069371	Apply coding standards for indentation	2017-04-28 15:43:06 -05:00
Scott Lahteine	dabca83742	Merge pull request #6437 from Kaibob2/patch-1 Update language_de.h	2017-04-28 14:47:47 -05:00
Kai	3d0a4c4ea9	Update language_de.h	2017-04-28 21:09:10 +02:00
Silvio	6bf1d50188	Added missing translations (#6458 )	2017-04-28 13:49:16 -05:00
Mehmet Sutas	404f767d44	Update language_tr.h (#6463 )	2017-04-28 13:48:31 -05:00
Petr Zahradnik	5e701524f8	Update language_cz.h for new translations (#6465 ) * Update language_cz.h for new translations * Correction translate * Revert correction back to hotend	2017-04-28 13:47:43 -05:00
gege2b	0a92ce7a98	Completed french translation (#6475 )	2017-04-28 13:46:09 -05:00
Ernesto Martinez	ff4fb42e7d	Add new strings as per recent changes in RCBugFix (#6482 ) Adding missing strings to Spanish language, as per changes recently done to the RCBugFix branch.	2017-04-28 13:45:22 -05:00
paulusjacobus	67d1fc5556	Update language_nl.h (#6478 ) updated the RCbugfix release with additional Dutch translations	2017-04-28 13:42:39 -05:00
benlye	8c6b4537a6	Fix issue in itostr4sign with numbers <100 (#6487 ) The first character in the string wasn't blanked if the number went from >= 100 to <100, resulting in artefacts in the displayed string.	2017-04-28 13:35:11 -05:00
LVD-AC	4ea8d0f89b	Solved "The Travis CI build failed "	2017-04-28 19:55:21 +03:00
LVD-AC	ed6b361e27	cleanup ready to squash	2017-04-28 18:09:18 +03:00
LVD-AC	7a6a1ef583	M666 normalize positive values to <=0 M666 + tower radians absolute value	2017-04-28 18:05:24 +03:00
Roxy-3D	4075b95519	Allow BL-Touch users to control heaters during probe event (#6485 ) The Configuration.h file entries for BL-Touch have been updated to: ```cpp //#define BLTOUCH //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event ```	2017-04-28 09:19:55 -05:00
Roxy-3D	6e8ecb908a	Shut down heaters during BL-Touch probe event The electro-magnetic interference from the bed and nozzle are affecting the BL-Touch repeatability for some users. This problem can be helped by shutting down the heaters during the actual probe event and then quickly turning them back on. Because this code is messing with the heaters, it is written in a paranoid manner. It only turns the heaters back on if everything is EXACTLY as it expects things to be. The BL-Touch probe must have been put into a deployed state less than 20 seconds prior, or the stow() function will NOT turn the heaters on. This code has been tested and works for both G28 and probing functions.	2017-04-27 18:52:58 -05:00
LVD-AC	d8102aeca8	Cn negative : no tower angle calibration Giving a negative number of probe points disables the tower angle correction calibration ('4point' instead of '7point' solution) EEPROM version updated	2017-04-27 21:13:07 +03:00
Roxy-3D	3601f08e87	Better tuned FolgerTech i3-2020 example file	2017-04-27 11:16:38 -05:00
Roxy-3D	a20b7d9581	Better tuned Example file for FolgerTech i3-2020 Also setting up Z-Probe on the machine.	2017-04-27 11:16:38 -05:00
Kai	bf2fe46062	Update language_de.h	2017-04-27 10:13:02 +02:00
Kai	11d34be060	Update language_de.h	2017-04-27 10:06:26 +02:00
Scott Lahteine	817ecb9ff4	Merge pull request #6453 from thinkyhead/rc_cleanup_wednesday Minor cleanups, work-in-progress	2017-04-26 19:41:52 -05:00
Roxy-3D	22f6e277af	Get example files fully into compliance Change to support new name GRID_MAX_POINTS_XY Start UBL at version 1.0 in the CUSTOM_MACHINE_NAME	2017-04-26 16:22:17 -05:00
LVD-AC	a9bc1d30cc	z_offset change Avoids to have to recalibrate the delta_height after a z_offset change	2017-04-26 21:57:11 +03:00
Roxy-3D	ec26e23e7e	Add my two 'Nice' machines as example configurations These are my two 'Nice' machines. Both are good example machines. The FolgerTech i3-2020 is probably the best value kit on the market right now. And it has developed a 'Cult Following' of hobbiests. I'll always have an up to date Configuration.h file set for it, so it may as well be an example configuration. And the gCreate gMax 1.5+ is the best printer I've ever seen that runs Marlin. For sure, I'll always have up to the minute Configuration.h files for this printer also. I've moved over to using the gMax as my primary development machine for Marlin. So... Besides being a good machine, it is a nice convienience for me to have this Configuration.h file as an 'Example'.	2017-04-26 12:46:12 -05:00
Scott Lahteine	adb8e68592	Fix stuck "Print Aborted" LCD message Fixes #6393	2017-04-26 06:24:23 -05:00
Scott Lahteine	096b927102	Minor optimization of FILAMENT_WIDTH_SENSOR	2017-04-26 06:24:23 -05:00
Scott Lahteine	5bdb0b567d	Cosmetic patches	2017-04-26 06:24:23 -05:00
Kai	38ae7f4238	Added more translation strings There are some quite tricky ones which are hardly translateable. Maybe @Sebastianv650 can review this	2017-04-26 11:58:11 +02:00
Scott Lahteine	4d96d3eab1	Bootscreen delay after clear, then set chars Fixes #6426	2017-04-25 23:37:28 -05:00
Scott Lahteine	5512130d6c	Only set Compare Mode for channel A Fixes #6445	2017-04-25 23:14:16 -05:00
Roxy-3D	d467e97679	Smart-Fill and Mesh-Tilting (both 3-point and grid) working! Also... The memory corruption issue may be fixed. The GCC compiler was inlining static functions and this caused the G29() stack frame to become much larger than the AVR could handle.	2017-04-25 21:03:41 -05:00
Scott Lahteine	a699967ec8	Merge pull request #6443 from thinkyhead/rc_interrupt_fastio Patch fastio.h with Timer 2 interrupt support	2017-04-24 20:09:41 -05:00
Scott Lahteine	2823bf0874	Update fastio.h with special handling for Timer 2	2017-04-24 16:58:22 -05:00
Scott Lahteine	fd535e111a	Fix up XYZ_CONSTS_FROM_CONFIG macro	2017-04-24 14:05:11 -05:00
Kai	03c2f756b9	Update language_de.h	2017-04-24 13:32:16 +02:00
LVD-AC	dcf30a69d6	Allowing #define DELTA_TOWER_ANGLE_TRIM[C_AXIS] More consistent with M665 where C-value is allowed as well, then normalized	2017-04-23 14:51:24 +03:00
Brian	f41fb2b635	Numerous UBL-related changes: * relocated ubl state to config. store: * removed a number of ubl state variables and padding which were largely unused - saved 58 bytes of both SRAM and EEPROM; * modified ubl sanity_check - no longer checks removed state variables that were otherwise unused, where checking didn't seem to accomplish anything, ultimately; * removed pre_initialized state, saving 64 bytes of SRAM; * removed automatic saving of UBL state after UBL activation/deactivation; * consolidated multiple GRID_MAX_POINTS_X/Y to 'Global Leveling' section of EEPROM; * minor update to G29 Sx notes/instructions; * renamed mesh load and save parameter to 'slot' from 'm' for clarity;	2017-04-22 18:44:39 -05:00
Brian	f1a4758cef	use progmem instead of sram for mesh_index_to_x/ypos array; fix maximum mesh_index_ array size at 16 (15+1);	2017-04-22 18:34:49 -05:00
Scott Lahteine	87d240042a	Optimize number-to-string functions, no-fan display	2017-04-22 16:23:15 -05:00
Scott Lahteine	959566cf0a	Update note about M163 / M164	2017-04-22 16:23:15 -05:00
Scott Lahteine	830851df13	Spend some SRAM to optimize bilinear leveling	2017-04-22 16:19:31 -05:00
Scott Lahteine	091179d960	bed_level_grid => z_values (also *_virt array)	2017-04-22 16:19:31 -05:00
Scott Lahteine	23cdbbb2d3	Add a method to refresh bilinear bed level after a change	2017-04-22 16:19:30 -05:00
Scott Lahteine	ccda63c473	Drop the accessor form for LCD value editing	2017-04-22 16:19:30 -05:00
Scott Lahteine	10da175be5	Fix a pair of compiler complaints	2017-04-22 16:19:30 -05:00
Scott Lahteine	ff0018e287	Format hex values as uppercase	2017-04-21 21:42:41 -05:00
android444	77aa16005d	Polish font Add polish font for GLCD displays only. HD44780 work properly without polish character. Update language_pl.h.	2017-04-21 21:42:41 -05:00
teemuatlut	244f67590e	Delta probe height bug solved	2017-04-22 02:23:56 +03:00
Hans Raaf	406a83ff2d	Fix for Meshpositions if printer has negative endstop positions	2017-04-22 00:16:16 +02:00
benlye	3ed737425d	Fix typo in new SET_COM macro	2017-04-21 15:08:18 -05:00
Brian	88649b06a6	use planner.z_fade_height, etc. instead of private, ubl-specific g29 fade height	2017-04-21 09:09:09 -05:00
LVD-AC	004928148c	Tower angles Adding '7-point' tower angle correction calibration	2017-04-21 12:48:45 +03:00
LVD-AC	76ec7a0f80	Adding upto 7*7 probe grids - adding Cn 5, 6 and 7	2017-04-21 11:58:39 +03:00
LVD-AC	d4f593d200	Delete 'expert level' and getting rid off verbose level 3 and configuration_adv settings	2017-04-21 11:58:39 +03:00
LVD-AC	13c8493878	M665 rework and related issues (all delta's) - Making M665 compatible with repetier (see http://reprap.org/wiki/G_code#M665:_Set_delta_configuration) - M665 B also sets the radius for manual calibration menu - Converting tower ajustment definitions to arrays - tower angle corrections compatible with Esher 3D wizzard - Only tower angles need to be adjustable with M665 and stored to EEPROM - tower radius and diag rod can be adjusted in the FW only with #define	2017-04-21 11:58:39 +03:00
Scott Lahteine	e0e069c6d8	Clean up trailing whitespace	2017-04-20 17:52:07 -05:00
Scott Lahteine	9b94210394	Bring FLSUN config more up to date	2017-04-20 17:52:06 -05:00
Scott Lahteine	b0aa256bc0	Updates for all configs	2017-04-20 17:52:05 -05:00
Scott Lahteine	ee46ce1743	Add and apply interrupt helper macros	2017-04-20 16:04:29 -05:00
Scott Lahteine	6131c62499	General cleanup	2017-04-20 16:04:29 -05:00
benlye	2c86dfd3b5	Fix compiler type conversion errors after LCD changes	2017-04-20 16:04:29 -05:00
Scott Lahteine	55f9e76610	Merge pull request #6367 from thinkyhead/rc_cleanup_followup Cleanup after some direct commits	2017-04-20 15:13:24 -05:00
Scott Lahteine	d38a792a91	Merge pull request #6382 from MagoKimbra/fix_configuration_store Fix double definition in configuration_store	2017-04-20 15:06:58 -05:00
Scott Lahteine	b98bc034ae	Replace c_assert hack with static_assert	2017-04-19 13:07:35 -05:00
Scott Lahteine	5eb2b1a790	Clear up G29 compiler warnings	2017-04-19 13:07:35 -05:00
Scott Lahteine	4ce2a63db0	Apply const, spacing to Marlin_main.cpp	2017-04-19 13:07:34 -05:00
Scott Lahteine	e97f1284c1	Cleanup of pins testing code	2017-04-19 13:07:34 -05:00
Scott Lahteine	e9b53ae00c	Cleanup after some direct commits https://github.com/MarlinFirmware/Marlin/commit/5e9726530ff21d3bc62beaa6 ac1b9437c276130a	2017-04-19 13:07:34 -05:00
Scott Lahteine	e05d050a1e	Add hex routine to print an address	2017-04-19 13:07:34 -05:00
Scott Lahteine	4542282f5e	Fix broken TOGGLE macro in fastio.h	2017-04-19 12:38:13 -05:00
MagoKimbra	ed52275a14	Fix double definition in configuration_store	2017-04-18 17:57:40 +02:00
Scott Lahteine	de569e3d4e	Merge pull request #6327 from Bob-the-Kuhn/M43-toggle-&-Z-probe-fixes M43 Toggle & Z servo test - fix bug & add another check	2017-04-18 03:21:57 -05:00
Scott Lahteine	f33a650ecc	Merge pull request #6368 from thinkyhead/rc_linear_advance_eeprom Add Linear Advance values to EEPROM and LCD	2017-04-18 02:54:12 -05:00
Scott Lahteine	a00ae4790a	Replace M905 with unique code M900	2017-04-17 16:39:37 -05:00
Scott Lahteine	1286d9603d	Clean up and organize ultralcd.cpp	2017-04-17 16:39:36 -05:00
Scott Lahteine	3cdf78a79f	MSG_VOLUMETRIC => MSG_FILAMENT	2017-04-17 16:39:36 -05:00
Thomas Moore	f8e77d6545	Add Linear Advance values to EEPROM and enable configuration of K via LCD	2017-04-17 16:39:36 -05:00
Scott Lahteine	eb2d073dae	Add M905 R for setting the E/D ratio directly	2017-04-17 16:39:36 -05:00
Scott Lahteine	69dfa54a84	Use code_value_linear_units for known-linear axes	2017-04-17 16:39:36 -05:00
Scott Lahteine	b956f2642b	Show M503 report with current linear units	2017-04-17 16:39:36 -05:00
Scott Lahteine	ba4a005ceb	Merge pull request #6373 from mtowara/mt_makefile_fix Fix Makefile build	2017-04-17 16:16:37 -05:00
towara	150b15c311	fix compiler errors generated by more stringent flags in Makefile: - use volatile for registers - avoid implicit casts	2017-04-17 11:59:47 +02:00
towara	f6095c9325	fix missing serial.cpp in Makefile	2017-04-17 11:59:03 +02:00
Scott Lahteine	871f92378c	Tweak headings in EEPROM structure	2017-04-16 18:42:33 -05:00
Scott Lahteine	bf2548be4a	Merge pull request #6362 from tcm0116/babystepping Only queue babysteps if axis is in a known position	2017-04-16 17:46:06 -05:00
dot-bob	9c410ddf68	Fixed an issue where a display with a hardware reset pin (LCD_RESET) may not get initialized properly.	2017-04-15 22:45:15 -06:00
Thomas Moore	72a7fac461	Only queue babysteps if axis is in a known position	2017-04-15 23:19:43 -05:00
Roxy-3D	5e9726530f	Setup to find data corruption and general clean up This data corruption problem is very difficult. Just changing the code a little bit changes whether the problem even happens and what is affected. I need these changes in the main branch so I can operate with the extra debug code always available and turned on. Everything is setup such that if M100 is turned off or DEBUG(ECHO) is turned off, the code is not affected. M100 has been made a little bit more inteligent so it can display the serial command buffers in a more meaningful way (because the data corruption seems to often times end up in that area).	2017-04-15 19:26:43 -05:00
Scott Lahteine	e519e95953	Merge pull request #6358 from thinkyhead/rc_doubleclick_fix Show Cancel/Continue screen for ABL "Level Bed"	2017-04-15 17:25:37 -05:00
Scott Lahteine	a81606c680	Show Cancel/Continue screen for ABL "Level Bed"	2017-04-15 16:51:03 -05:00
Scott Lahteine	51021bc7b8	Merge pull request #6353 from thinkyhead/rc_endstop_coolness Clean up endstop triggering code	2017-04-15 16:49:54 -05:00
Scott Lahteine	857dec0990	Merge pull request #6342 from benlye/benlye-fix-softspi Fix softspi variant conditional for 1284p	2017-04-15 16:33:50 -05:00
Scott Lahteine	4e04383d18	Merge pull request #6354 from thinkyhead/rc_doubleclick_fix Fix undefined symbol if DOUBLECLICK_FOR_Z_BABYSTEPPING and HAS_BED_PROBE defined	2017-04-15 16:06:29 -05:00
Thomas Moore	8dd0492e68	Show lcd_babystep_zoffset screen if DOUBLECLICK_FOR_Z_BABYSTEPPING is enabled and HAS_BED_PROBE is defined	2017-04-15 14:44:50 -05:00
benlye	0a2f60fab4	Make spi.h inclusion conditional spi.h is only needed if HEATER_0_USES_MAX6675 is defined, so making its inclusion conditional on HEATER_0_USES_MAX6675 being defined.	2017-04-15 16:22:42 +01:00
Bob-the-Kuhn	60471b7592	minor improvements Configuration_store.cpp - changed a couple of print statements so the values were printed. The old method resulted in the formula being printed. ubl_G29 1) added support for R option to P4. Now probes all points unless R is present and the number is greater than 0. 2) P2 - moved map print statement so it showed the point that was currently being probed, The old location did this only for the first point. 3) P4 - Moved the map print for the same reason. ultralcd.cpp - changed "Mesh Editor :" to "Mesh Editor" because the LCD draw routine puts a ":" in automatically so you end up with an extra ":" using the old message.	2017-04-15 09:31:55 -05:00
Scott Lahteine	25a61e9061	Improve motion-based endstop triggering code	2017-04-15 06:16:50 -05:00
Scott Lahteine	a2356c2825	Fix compiler warning about z-offset callback	2017-04-15 02:50:27 -05:00
Scott Lahteine	037c964d26	Reverse bools on prepare_move sub-functions	2017-04-15 01:08:19 -05:00
Scott Lahteine	d9c4333806	Extra logging of Dual X modes	2017-04-15 01:08:19 -05:00
Scott Lahteine	4067d15c92	Cleanup, extend TMC2130 implementation	2017-04-14 23:00:00 -05:00
Scott Lahteine	d60c02c5b1	Cleanup, extend TMC2130 configuration	2017-04-14 22:43:56 -05:00
Scott Lahteine	0e97b3d6d0	Fix some configuration spacing	2017-04-14 22:36:10 -05:00
Scott Lahteine	cf6f483378	Merge pull request #6187 from thinkyhead/rc_flsun_delta_autocal Delta: DELTA_HEIGHT, G33 Auto-Calibrate, drop M206/M428, add M665 H	2017-04-14 22:32:12 -05:00
Scott Lahteine	24882adfbf	Allow NO_WORKSPACE_OFFSETS with DELTA_AUTO_CALIBRATION - On `DELTA` the `M665 H` option supplants `M206` - On `DELTA` `NO_WORKSPACE_OFFSETS` only reverts `G92` behavior - Spawn 4 conditionals based on `NO_WORKSPACE_OFFSETS` - Optimize coordinate space conversion for `DELTA` workspace - To keep EEPROM version, retain `home_offset[XYZ]`, just ignore XY	2017-04-14 21:56:49 -05:00
Bob-the-Kuhn	1acb84ba02	fix 1 bug, add error messages =============================================== make changes requested by reviewers =============================================== add M43 test to Travis, fix EOL, remove trailing spaces	2017-04-14 20:57:45 -05:00
LVD-AC	8821963873	Implement delta auto-calibration and delta_height	2017-04-14 19:46:31 -05:00
Scott Lahteine	b305699046	Merge pull request #6341 from benlye/benlye-lcd_babystep_zoffset Fix lcd_babystep_zoffset()	2017-04-14 19:11:46 -05:00
LVD-AC	03bda24d19	Add delta auto-calibration and configuration for Flsun AC	2017-04-14 19:08:14 -05:00
Scott Lahteine	1bd25fd2b3	Clean up config spacing, section headings, etc.	2017-04-14 19:06:31 -05:00
Scott Lahteine	153b0ae967	Tweak Delta Printer configuration note	2017-04-14 19:06:06 -05:00
Scott Lahteine	81ffd98dd9	Allow faux leveling	2017-04-14 19:06:06 -05:00
Scott Lahteine	2355d87e11	Merge pull request #6346 from thinkyhead/rc_broken_abl_test Add support for SOLENOID_PROBE	2017-04-14 18:36:32 -05:00
Scott Lahteine	f4685c28b7	Reorder Conditionals_post.h and add comments	2017-04-14 18:18:21 -05:00
Scott Lahteine	0ac2b5c045	Additional 5 extruders support (solenoids, microstepping)	2017-04-14 18:18:20 -05:00
Scott Lahteine	fd2a0784ba	Add support for SOLENOID_PROBE	2017-04-14 17:24:36 -05:00
Scott Lahteine	5803ba43a9	Expose EXT_SOLENOID as an advanced option	2017-04-14 17:24:36 -05:00
Scott Lahteine	ea734f910b	Use direct pin manipulation whenever possible	2017-04-14 16:55:35 -05:00
Scott Lahteine	19d0c6a0c0	Patch to init W with RGBW_LED	2017-04-14 16:55:23 -05:00
Scott Lahteine	3e079660b0	Never define SLED_PIN	2017-04-14 16:36:32 -05:00
benlye	1a447d0047	Fix variant conditional for 1284p	2017-04-14 18:46:09 +01:00
benlye	1f9ee42750	Fix lcd_babystep_zoffset() Resolve 'steps_to_mm was not declared in this scope' compilation error after recent changes to merge babystepping with M851	2017-04-14 18:38:35 +01:00
Bob-the-Kuhn	445d39e95a	CORExx endstop detection fixes 1. The CORExx printers were checking more endstop axis than needed. 2. Removed all the CORE_xx_NOT logic. The motor_direction(xx) routine always returns the correct data so it is not needed. It was actually cause the wrong direction to be checked in some cases. 3. Made the logic/defines for X, Y & Z axis all the same. The old logic checked inappropriate configurations for Y and didn't check all the correct configurations on Z. 4. Added a check for zero steps before the X, Y & Z axis. Previously would check the they axis even if there were no movement.	2017-04-13 21:43:37 -05:00
Roxy-3D	28fec61f92	M100 Fixes and Features All the memory accesses need to be unsigned char in order to avoid false errors being detected. Two new features are available for developers to call into the M100 functionality to look for data corruption.	2017-04-13 18:20:53 -05:00
Scott Lahteine	52c3ace102	Add BABYSTEP_ZPROBE_OFFSET as an optional feature	2017-04-13 16:29:43 -05:00
Scott Lahteine	cd4e6abec8	Group BABYSTEPPING options together	2017-04-13 16:26:45 -05:00
Scott Lahteine	60ac41a32c	Add code to handle changes to zprobe_zoffset	2017-04-13 15:46:35 -05:00
Scott Lahteine	8fa4209916	Movement/adjustment should be reverse of probe offset change	2017-04-13 15:46:05 -05:00
Thomas Moore	361655828f	Use babystepping to adjust bed probe z-offset	2017-04-13 15:46:05 -05:00
Scott Lahteine	36e5c7c389	Merge pull request #6330 from thinkyhead/rc_improvements Sanity check per-axis options' array sizes	2017-04-13 13:08:44 -05:00
Scott Lahteine	02fca543bb	Merge pull request #6272 from thinkyhead/rc_adc_variable_rate Make ADC sensor reading frequency adjustable	2017-04-13 12:49:31 -05:00
Scott Lahteine	34308368c0	Sanity check per-axis settings for size	2017-04-13 11:35:20 -05:00
Scott Lahteine	ac96ae89f9	Apply `const` in Stepper::isr	2017-04-13 06:20:36 -05:00
Scott Lahteine	2fa1e882d0	Merge pull request #6325 from thinkyhead/rc_M20_with_size Simplified M20 with size	2017-04-13 05:06:52 -05:00
Bob-the-Kuhn	1b12fea0fa	simplified M20 with size	2017-04-13 04:56:58 -05:00
Scott Lahteine	4022b971db	Merge pull request #6315 from thinkyhead/rc_unify_M421 Unify M421	2017-04-12 19:43:28 -05:00
Scott Lahteine	b236562354	Merge pull request #6306 from thinkyhead/cleanup_after_6302 Adjustments to M100	2017-04-12 19:12:27 -05:00
Scott Lahteine	5e4f4d387f	Swap MBL z_values dimensions to [X][Y]	2017-04-12 17:24:05 -05:00
Scott Lahteine	063f641651	Unify M421	2017-04-11 15:46:13 -05:00
Scott Lahteine	6d5400dc31	Merge pull request #6240 from thinkyhead/rebuild_rgb_led Extend RGB LED with Printer Events	2017-04-11 15:16:57 -05:00
Scott Lahteine	dac21ec680	Add support for an RGBW LED	2017-04-11 12:58:55 -05:00
Scott Lahteine	e7746ffee4	Extend RGB LED support, adding Printer Events	2017-04-11 12:15:41 -05:00
Scott Lahteine	c7063eb55c	theTarget => target_temp	2017-04-11 12:15:41 -05:00
Scott Lahteine	36bda2bade	Add HAS_RESUME_CONTINUE shorthand macro	2017-04-11 12:15:40 -05:00
Scott Lahteine	53e6c33c37	2 is DXC_DUPLICATION_MODE	2017-04-11 12:15:40 -05:00
Scott Lahteine	a2cb0a3d54	Use multiply for delta probe constraint	2017-04-11 12:15:40 -05:00
Scott Lahteine	6487c96a4a	Merge pull request #6313 from Kaibob2/patch-10 Allow 10mm Movements for Z-Axis	2017-04-11 12:04:10 -05:00
Kai	001bc14255	Allow 10mm Movements for Z-Axis I use the movement options via LCD quite often. Especially to get the nozzle out of the way. I see no reason, why the 10mm option is disabled for the Z-Axis, this is why i always delete this line when i compile a new version. If this is unwanted, please just close this PR	2017-04-11 18:39:26 +02:00
Scott Lahteine	6a9b008044	Fix MINIMUM_STEPPER_PULSE maths	2017-04-11 11:11:17 -05:00
Scott Lahteine	68773f4486	Simplify stepper macros by renaming enable/disable macros	2017-04-11 11:10:26 -05:00
Scott Lahteine	e02a5a6371	Add macros for delays by machine cycle	2017-04-11 09:18:32 -05:00
Scott Lahteine	ecc537015a	Have M109 / M190 do nothing with no parameters	2017-04-11 05:06:25 -05:00
Scott Lahteine	03aa9a390e	Apply coding standards to M100, break up into functions	2017-04-10 21:09:43 -05:00
Scott Lahteine	48c16fc6ef	Merge pull request #6307 from thinkyhead/rc_less_no_reentrance Only lcd_synchronize needs no_reentry	2017-04-10 20:58:32 -05:00
Scott Lahteine	4fcfe926d6	Only lcd_synchronize needs no_reentry	2017-04-10 20:13:23 -05:00
Scott Lahteine	67fb7f82ac	Merge pull request #6283 from thinkyhead/rc_eeprom_z_fade Save / restore z_fade_height in EEPROM	2017-04-10 20:05:20 -05:00
Scott Lahteine	eff5af569b	Merge pull request #6300 from MagoKimbra/rc_fix_mesh_report Fix mbl_mesh_report	2017-04-10 19:37:19 -05:00
Scott Lahteine	4a18968c10	Merge pull request #6297 from Kaibob2/patch-9 Fix EPROM -> EEPROM	2017-04-10 19:35:30 -05:00
Roxy-3D	ba85faabc0	Fix M100 Free Memory Checker M100 had numerious changes and quit working. Part of the problem is the overloading of the SERIAL_PROTOCOL functions. Also, some of the address arithmatic was changed to use char *ptr and passing ptr into the SERIAL_PROTOCOL functions caused them to try to print a string instead of a number. M100 is working again. Let's keep it that way! M100 has been expanded to now have a function int free_memory_is_corrupted() that can be called from other code to see if the free space is still contiguous. It may make sense to add a flag to control its verbose nature but right now, the extra chit chat is very helpful to know int free_memory_is_corrupted() is doing the right thing and what it found at various points when it was called. A 'Show & Tell' is coming up with int free_memory_is_corrupted().	2017-04-10 15:33:55 -05:00
Kai	3b82db5fe9	Missing semicolon in ultralcd.cpp When PARK_HEAD_ON_PAUSE is defined Marlin won't compile because of two missing semicolon.	2017-04-10 14:45:51 -05:00
MagoKimbra	7d2e637867	Fix mbl_mesh_report	2017-04-10 20:50:19 +02:00
Kai	afeb0452ef	Fix EPROM -> EEPROM These fixes are neede because before it showed the englisch text even if language = de was selected	2017-04-10 18:37:00 +02:00
Scott Lahteine	7f950a80c0	Make ADC sensor reading frequency adjustable	2017-04-09 22:18:21 -05:00
Scott Lahteine	786af73e24	Convert config code to a static class	2017-04-09 22:06:41 -05:00
james94jeans2	5b9476fe78	Added z_fade_height to EEPROM-Settings Firmware was forgetting the z_fade_height in Planner, set by M420 Z<f>, after each reset or loading settings from EEPROM. Added the float z_fade_height to EEPROM-Storage, now remembers the value.	2017-04-09 21:16:58 -05:00
Scott Lahteine	9343f6a95f	Put TOSHIBA with other stepper driver options	2017-04-09 20:52:49 -05:00
Scott Lahteine	7a704af5e6	Merge pull request #6284 from thinkyhead/rc_wt150_rebase wt150 (Mightyboard Rev E) & RRD Full Graphic Smart Controller	2017-04-09 20:27:44 -05:00
Max Matveev	2031fb913b	Fixed comparison of float values to NaN	2017-04-09 20:28:46 +02:00
Scott Lahteine	e48a52a530	Patch a display issue with LCD_DECIMAL_SMALL_XY The `ftostr4sign` function got munged by the `WITHIN` patch	2017-04-09 10:25:35 -05:00
Scott Lahteine	1a3cd6a090	Merge pull request #6213 from thinkyhead/rc_gitattributes Init bed_level_virt_interpolate on EEPROM load	2017-04-09 08:13:11 -05:00
Scott Lahteine	314a02e2d5	Toggle with XOR	2017-04-09 07:58:47 -05:00
Scott Lahteine	8bc0d90b00	Init bed_level_virt_interpolate on EEPROM load	2017-04-09 07:04:20 -05:00
MD	20dd5376b8	Cheaptronic V2 Add support for new electronics www.reprapobchod.cz	2017-04-09 06:57:43 -05:00
Scott Lahteine	4cdda5615b	Bring other configs up to date with wt150 changes	2017-04-09 06:45:42 -05:00
Paweł Stawicki	9b0885f4f6	Allow boards without a thermistor	2017-04-09 06:45:41 -05:00
Paweł Stawicki	64cfcebe66	Update SlowSoftI2CMaster link. MightyBoard digipots I2C bus has no resistors.	2017-04-09 06:45:03 -05:00
Paweł Stawicki	0eb16d9ff7	Add example config for the wt150 printer with RepRapDiscount Full Graphic Smart Controller	2017-04-09 06:44:54 -05:00
Paweł Stawicki	652bedfa18	Add RepRapDiscount Full Graphic Smart Controller support to MIGHTYBOARD REVE	2017-04-09 06:44:53 -05:00
Paweł Stawicki	44cdebb8f1	Add software spi support for max6675	2017-04-09 06:44:53 -05:00
Paweł Stawicki	191fec009f	Add digipot i2c control for MCP4018	2017-04-09 06:44:53 -05:00
Scott Lahteine	e5b16081cb	Update TinyBoy2 configurations	2017-04-09 06:44:53 -05:00
Scott Lahteine	1855534f20	Config files cleanup	2017-04-09 06:44:52 -05:00
Scott Lahteine	c26a315d0b	Additional missed patches	2017-04-09 04:24:23 -05:00
Scott Lahteine	39617e10b8	Patch configs comment formatting	2017-04-09 03:49:16 -05:00
Scott Lahteine	c54f6cf23d	Updates to support 5 extruders	2017-04-09 03:49:16 -05:00
Scott Lahteine	2b88ccd0aa	Apply UBL mesh bounds to remaining configs	2017-04-09 03:49:15 -05:00
Scott Lahteine	60be3d264b	Macros to print floats, hiding imprecision	2017-04-09 03:48:40 -05:00
Scott Lahteine	b356d73239	Merge pull request #6278 from thinkyhead/pr_delta_angles Followup to additional delta trim options	2017-04-08 22:25:57 -05:00
Jimmy Envall	f78d44e91a	Added support for delta tower angle corrections.	2017-04-08 21:13:44 -05:00
Scott Lahteine	d3b4d84586	Merge pull request #6277 from thinkyhead/pr_roxy3d_rcbugfix Unify UBL Command Parsing	2017-04-08 20:17:46 -05:00
Scott Lahteine	d4ce839351	Cleanup following Pins Debug update	2017-04-08 18:59:57 -05:00
Scott Lahteine	c7a8f7970b	Formatting / cleanup	2017-04-08 18:59:57 -05:00
Scott Lahteine	29d4ec8257	Support 5 extruder auto fans	2017-04-08 18:59:57 -05:00
Scott Lahteine	824f3c1c0d	Fix up configuration comments	2017-04-08 18:59:56 -05:00
Scott Lahteine	995ed90248	Clean up Filament Width Sensor comments	2017-04-08 18:59:56 -05:00
Scott Lahteine	5a7b810fdd	General comment cleanup	2017-04-08 18:58:33 -05:00
Scott Lahteine	0027c22839	Drop extraneous calls to lcd_update	2017-04-08 18:58:33 -05:00
Scott Lahteine	d6db7a9b03	patch "step_remaining"	2017-04-08 18:13:20 -05:00
Scott Lahteine	cbc2331187	Use LCD_MESSAGEPGM over lcd_setstatuspgm	2017-04-08 18:04:39 -05:00
Scott Lahteine	3729510b1e	Set and check main parameter values, report all errors	2017-04-08 17:15:55 -05:00
Roxy-3D	34d3ed9ab1	These items were removed from the UBL Command Parsing Having these items randomly (and errorniously) disappear cost me several hours of work yesterday.	2017-04-08 15:30:20 -05:00
Scott Lahteine	15edb41cee	Patches to UBL	2017-04-08 14:59:14 -05:00
Roxy-3D	14cf527bb8	Getting setup for debugging	2017-04-08 14:59:14 -05:00
Scott Lahteine	f8408036f2	Merge pull request #6264 from thinkyhead/rc_five_extruders Support up to 5 extruders in Marlin	2017-04-07 12:48:56 -05:00
Bob-the-Kuhn	f7fc49c3a3	Finish name change DAC_STEPPER_DFLT wasn't changed to DAC_MOTOR_CURRENT_DEFAULT in all places on PR #6124	2017-04-07 11:05:24 -05:00
Scott Lahteine	832064e4f2	Implementation changes to support 5 extruders	2017-04-07 10:46:37 -05:00
Scott Lahteine	04050237f0	Header and pins changes to support 5 extruders	2017-04-07 10:46:36 -05:00
Scott Lahteine	2a84122edd	Configuration changes to support 5 extruders	2017-04-07 10:46:35 -05:00
Scott Lahteine	edf18977c1	Patch pins files hotends/e-steppers sanity check	2017-04-07 10:46:33 -05:00
Scott Lahteine	dc84678fc1	Fix HOTEND_STATUS_ITEM for graphical display	2017-04-06 23:07:30 -05:00
Scott Lahteine	a0de5d94e2	Merge pull request #6258 from benlye/benlye-bilinearfix2 Better fix for bilinear Z offset and G29 Z (update to #6251)	2017-04-06 20:51:57 -05:00
Scott Lahteine	b23aef5b8d	Merge pull request #6190 from Bob-the-Kuhn/Stop-and-Kill-prints---round-2 Message for every KILL and STOP (also need delays)	2017-04-06 20:40:12 -05:00
Roxy-3D	945303c0d5	eleminate bootscreen.h	2017-04-06 19:55:41 -05:00
Roxy-3D	ef3da3971e	Update ubl.h	2017-04-06 19:55:41 -05:00
Roxy-3D	8644dc170b	get synchronized to current file names	2017-04-06 19:55:41 -05:00
Roxy-3D	1451b7eacf	UBL's Grid Based Leveling code Pretty much... The code is in place. Still more work to do. But it has a lot of hooks and variables in other code, so commit and merge before I pick up a million 'Conflicts'.	2017-04-06 19:55:41 -05:00
Bob-the-Kuhn	549055f20c	Merge pull request #6124 from Bob-the-Kuhn/MCP4728-consistency MCP4728 consistency & fix ultralcd.cpp (PRINTRBOARD Rev F and RIGIDBOARD V2)	2017-04-06 16:35:50 -05:00
Bob-the-Kuhn	a77875c9d2	Merge pull request #6114 from Bob-the-Kuhn/try2-add-BLTouch-retry Another BLTouch retry place (replaces PR #6108)	2017-04-06 16:25:55 -05:00
Bob-the-Kuhn	3b9ff2cb12	Merge pull request #5676 from Bob-the-Kuhn/configuration.h Configuration.h - reword Z PROBE section	2017-04-06 16:18:34 -05:00
Bob-the-Kuhn	6643d553f6	# This is a combination of 2 commits. # This is the 1st commit message: MCP4728 consistency & fix ultralcd.cpp The MCP4728 DAC controls the stepper motor current strenth on the PRINTRBOARD Rev F and RIGIDBOARD V2 boards. PR #5792 on 9 FEB 2017 implemented default drive percentages but only on the RIGIDBOARD V2. This change moves the default settings to Configuration_adv.h. Also, ultralcd.cpp won't compile because of a type def conflict. Changed it to match the one in stepper_dac.cpp =========================================================== reword stepper curent section for clarity =========================================================== change name & improve comments =========================================================== changed name from A4JP to SCOOVO_X9H per PR #6139 # This is the commit message #2: fix typo	2017-04-06 16:16:27 -05:00
Bob-the-Kuhn	a44b3432c1	add BLTouch retry to a second place & add/update delays ================================================= implement requested changes ================================================= remove delays (they're in another PR) & move return	2017-04-06 16:13:07 -05:00
Bob-the-Kuhn	a5abc61fb9	Merge pull request #6219 from Bob-the-Kuhn/Servo-probe-and-toggle-pins M43 - add Toggle utility and Z servo utility (replaces PR #5864)	2017-04-06 16:10:50 -05:00
Bob-the-Kuhn	3b8926bd09	improved wording, consolidation of info, BLTouch warning ============================================== clarified BLTouch calculation & changed comment delimitters/flags I found it hard to pickout the various sections in this area so I changed most comments from // style to /** ... */ Made the BLTouch calculation simpler and clarified the units of measure for the result. ============================================ add changes to example configurations ============================================ add TinyBoy2 to this PR & add BLTouch Delay	2017-04-06 16:06:01 -05:00
Scott Lahteine	55d296aaf0	pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins	2017-04-06 16:06:01 -05:00
Scott Lahteine	e116723b8b	Adjust indentation in ubl.h	2017-04-06 16:06:00 -05:00
Scott Lahteine	1b3a26f2f5	Rename all UBL files with a ubl_ prefix	2017-04-06 16:06:00 -05:00
Scott Lahteine	d13991ae18	Use same config name for all mesh dimensions	2017-04-06 16:05:59 -05:00
Bob-the-Kuhn	f9686a108c	add Z servo test and toggle pins to M43	2017-04-06 15:59:38 -05:00
Scott Lahteine	62cbaa302e	Z_DUAL_ENDSTOP - make offset a configuration item The offset for Z_DUAL_ENDSTOP (z_endstop_adj) is already in Marlin. This PR just makes it a configuration item. z_endstop_adj is initialized in two places so both had to be modified.	2017-04-06 15:57:10 -05:00
Scott Lahteine	c9e35004e7	pinsDebug with more features, uses less RAM I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins	2017-04-06 14:46:28 -05:00
Scott Lahteine	4abd53f65a	Adjust indentation in ubl.h	2017-04-06 05:36:16 -05:00
Scott Lahteine	f5c5c1f771	Rename all UBL files with a ubl_ prefix	2017-04-06 05:33:27 -05:00
benlye	f1d50ac1dc	Fixing bilinear Z offset and G29 Z The fix in #6251 for bilinear Z offset was flawed and broke the Z parameter of G29 for bilinear levelling. This is reverted and a different fix is used for the double-addition of the Z-probe offset to the bilinear correction grid.	2017-04-06 07:41:46 +01:00
Scott Lahteine	eb1e6aa29b	Use same config name for all mesh dimensions	2017-04-06 00:42:52 -05:00
Scott Lahteine	c961dd084d	Add hidden option to output Bilinear grids in JSON	2017-04-05 23:43:17 -05:00
Scott Lahteine	df7b4252fd	Reduce M420 code for UBL slightly	2017-04-05 22:30:29 -05:00
Scott Lahteine	8866158d03	Add LEVELING_DATA as a capability	2017-04-05 22:30:28 -05:00
benlye	0a2b4f3486	Fix bilinear levelling z offset Since run_probe was altered to return the probe Z position rather than the nozzle Z position bilinear levelling has been broken because the Z-offset has been applied twice - once in the run_probe function, and then again in the G29 code for bilinear levelling.	2017-04-05 22:01:40 -05:00
Scott Lahteine	44a849bdce	Fix broken M206/M428/G92 offsets	2017-04-05 22:01:37 -05:00
Roxy-3D	52978e5ba5	Fix spelling mistake when UBL's mesh is Inactive	2017-04-02 20:07:09 -05:00
Roxy-3D	0423e93c42	Fix M421 AUTO_BED_LEVELING_BILINEAR and AUTO_BED_LEVELING_UBL M421 was not connected up for AUTO_BED_LEVELING_BILINEAR. M421 needed to migrate mesh data to new UBL EEPROM layout.	2017-04-02 16:46:37 -05:00
Scott Lahteine	3412950abc	Merge pull request #6209 from thinkyhead/rc_psu_zero Power Supply 0 as "General"	2017-04-02 16:44:42 -05:00
Roxy-3D	3e9e94801f	Fix problem described in issue # 6175 As it turns out... an unsigned int can not go to less than 0, so the loop never terminates.	2017-04-02 13:00:27 -05:00
Scott Lahteine	289e3d6844	Merge pull request #6215 from thinkyhead/rc_bed_false_alarm Fix thermal runaway when nonexistent bed temp is set	2017-04-02 11:59:58 -05:00
Scott Lahteine	948728e63b	Fix line-endings in UBL_G29	2017-04-02 11:48:26 -05:00
Scott Lahteine	699310d1d2	Fix: Thermal runaway if nonexistent bed's temp is set	2017-04-02 11:48:10 -05:00
Scott Lahteine	c56eec29f0	Configurable delay for BLTouch servo emulation	2017-04-02 11:14:53 -05:00
Scott Lahteine	deaad78df9	Merge pull request #5678 from Bob-the-Kuhn/G38-optional-double-tap G38 bug fix, made double touch optional & reverted to Z_MIN_PROBE	2017-04-02 10:32:04 -05:00
Scott Lahteine	5bce731962	Fix LCD preheat menus	2017-04-02 09:32:22 -05:00
Scott Lahteine	4c72167af3	Prevent a warning on echo_command	2017-04-02 08:36:58 -05:00
Scott Lahteine	9b5fd9522e	Fix formatting, order for a UBL change	2017-04-02 07:15:40 -05:00
Tannoo	54173c80ad	Power Supply 0 as "General"	2017-04-02 06:21:34 -05:00
Scott Lahteine	a2775d0c70	can wstring be removed?	2017-04-02 04:43:33 -05:00
Scott Lahteine	de4e19f17e	Patch MarlinSerial to match up with 32-bit version	2017-04-02 04:39:18 -05:00
Scott Lahteine	2cbc7b4b73	Relocate serial macros and functions	2017-04-02 01:05:25 -05:00
Scott Lahteine	eaa66f3c46	Indent MarlinSerial code	2017-04-02 01:05:25 -05:00
Scott Lahteine	7a7a80e6c5	status_printf => lcd_status_printf_P	2017-04-02 01:05:25 -05:00
Scott Lahteine	0e6ec34228	Use PSTR versions of lcd_status... to save SRAM	2017-04-02 00:45:39 -05:00
Scott Lahteine	34e2420b9b	Apply const args, clean up find_closest_circle_to_print	2017-04-01 23:15:41 -05:00
Scott Lahteine	e19fbd27ce	Minor spelling patch	2017-04-01 23:08:00 -05:00
Scott Lahteine	790a3e9a8c	Remove extraneous check of UBL_G26_MESH_EDITING	2017-04-01 23:03:40 -05:00
Scott Lahteine	7310110ec0	Fix logic of UBL::fade_scaling_factor_for_z	2017-04-01 22:52:48 -05:00
Scott Lahteine	1a775cecac	Revert behavior of enqueue_and_echo_commands_P	2017-04-01 21:53:46 -05:00
Scott Lahteine	79d42d87c1	Syntax cleanup	2017-04-01 21:53:46 -05:00
Scott Lahteine	b47fd31c37	Revert some changes to UBL	2017-04-01 21:53:45 -05:00
Bob-the-Kuhn	185337e787	add delays to allow stop & kill messages to get out	2017-04-01 00:23:14 -05:00
Scott Lahteine	63abb65146	Update description of PINS_DEBUGGING	2017-03-31 18:57:48 -05:00
Scott Lahteine	73e193da1d	Implement LCD_BED_LEVELING for PROBE_MANUALLY	2017-03-31 11:50:18 -05:00
Scott Lahteine	fcadc7bb1a	Implement the "manual" option for ABL	2017-03-31 11:50:18 -05:00
Scott Lahteine	9e22184936	Add a "manual" option for ABL	2017-03-31 11:50:18 -05:00
Scott Lahteine	541165e878	Merge pull request #6181 from thinkyhead/rc_ubl_further_fixes Further adjustments to UBL code	2017-03-31 11:35:02 -05:00
Scott Lahteine	b19a15fa7f	Within applied to UBL	2017-03-31 11:12:57 -05:00
Scott Lahteine	342ee458ae	Additional UBL fixes, optimizations	2017-03-31 11:12:57 -05:00
Scott Lahteine	a5e085cbea	Have run_probe() return probe Z, not nozzle Z	2017-03-31 09:27:49 -05:00
Scott Lahteine	4487d22d56	Apply FIXFLOAT macro	2017-03-31 09:27:48 -05:00
Scott Lahteine	6cac0f43eb	MBL fiddle	2017-03-31 09:27:48 -05:00
Scott Lahteine	25a6bfa7ed	Add and apply WITHIN macro	2017-03-31 09:27:48 -05:00
Scott Lahteine	81136c1e82	Merge pull request #6177 from thinkyhead/rc_tinyboy Support for TinyBoy 2 3D printer (and its OLED display)	2017-03-31 04:31:47 -05:00
Scott Lahteine	93aad54dc1	Clean up code, remove _now command function	2017-03-31 04:17:31 -05:00
Stefan Brüns	6ba6c92a81	Add example configuration for TinyBoy L10/L16 The TB2 is a Indiegogo funded 3d printer. It uses a MKS SMELZI V1.0 main board (based on MELZI, i.e. Sanguinololu). I comes as a complete kit, including display and panel. Two variants exists, L10 and L16, with a height of 100 and 160 mm. The heating function of the provided bed can enabled by soldering a thermistor and some wires to it. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>	2017-03-31 04:05:35 -05:00
Stefan Brüns	0fe57ad4f5	Add Support TinyBoy2 OLED/Encoder panel The OLED is driven by an SSD1306, connected to the board via I2C, the rotary encoder is connected to 3 GPIO pins. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>	2017-03-31 04:05:34 -05:00
Scott Lahteine	65ca6472ba	Make G26 compatible with G92 and M206	2017-03-31 02:20:20 -05:00
Scott Lahteine	4902fd4e95	More data in UBL class, make it a static class - Make all `unified_bed_leveling` data/methods static - Move some UBL-related variables into the class - Replace `map_[xy]_index_to_bed_location` with `mesh_index_to_[xy]pos`	2017-03-31 02:20:20 -05:00
Scott Lahteine	edbc024d76	Disable UBL_G26_MESH_EDITING by default	2017-03-31 02:20:20 -05:00
Scott Lahteine	9e4bd6b3b5	Further repairs to UBL, comments, spacing	2017-03-31 02:20:20 -05:00
Bob-the-Kuhn	f3618c3337	Reduce UBL RAM usage by making G26/G29 optional	2017-03-31 02:20:19 -05:00
Scott Lahteine	c9eb1d6ab7	Make MBL a static class, use lookup for index-to-point conversion	2017-03-31 01:28:07 -05:00
Scott Lahteine	de9d2cddc3	Merge pull request #6152 from thinkyhead/rc_cleanup_6150_etc UBL cleanup, optimization	2017-03-30 17:40:29 -05:00
Scott Lahteine	9217e4b8ec	Various UBL cleanups and bug fixes	2017-03-30 17:09:49 -05:00
Scott Lahteine	9924199802	Merge pull request #5908 from thinkyhead/rc_fix_slowdown General minor cleanup	2017-03-29 21:43:33 -05:00
Scott Lahteine	0e71e7b2fb	Cleanup to planner.cpp	2017-03-29 06:48:07 -05:00
Scott Lahteine	f105cad43c	Marlin: Slight cleanup to Marlin_main.cpp	2017-03-29 06:40:29 -05:00
Scott Lahteine	499f9e04e1	Marlin: Temperature soft-PWM cleanup	2017-03-29 06:37:27 -05:00
Scott Lahteine	7ddd94dc61	Merge pull request #5994 from StefanBruens/fix_Makefile_errors Fix makefile errors, cleanup	2017-03-29 06:32:08 -05:00
Scott Lahteine	af09095f03	Merge pull request #6154 from thinkyhead/rc_fil_sensor_vs_sd Show Filament Width on LCD when SD is disabled	2017-03-29 05:24:48 -05:00
Remo Kallio	d38b1bc4b1	Show filament width sensor values in LCD constantly if SD card support is not enabled.	2017-03-29 04:03:08 -05:00
Scott Lahteine	e3459ec178	Merge pull request #5989 from MagoKimbra/rc_fix_delta_angles Fix delta_angles	2017-03-29 03:35:18 -05:00
Scott Lahteine	f49aec057f	Tweak "can not" => "can't" in RUMBA pins	2017-03-29 01:04:50 -05:00
Scott Lahteine	0a23a1bb3b	Dynamic feedrate on SCARA, converting target mm/s to deg/s	2017-03-28 17:21:07 -05:00
Roxy-3D	d8724bb546	Get G29's P1 (Automated Probing) working again. Incorrect optimizations of data types and ternary operators caused some issues.	2017-03-28 17:11:02 -05:00
Scott Lahteine	c7f6ee9c93	Board A4JP should be SCOOVO_X9H	2017-03-27 22:22:13 -05:00
Scott Lahteine	a9fc30ae2e	Use safe_delay to ensure watchdog reset	2017-03-26 23:49:56 -05:00
Roxy-3D	171904b6c7	Make G29 What command print reliably and fix G29 P1 bug Waldo found	2017-03-26 17:05:58 -05:00
Roxy-3D	9d3ac66f73	Map clean up of UBL UBL's maps are cleaner. And with a 1 value, G29 O 1 will generate a map suitable to be Cut & Pasted into Excel so a Suface Map can be generated.	2017-03-25 18:55:05 -05:00
Roxy-3D	9a1949a91e	Cleaned up G26 ready to replace existing one at MarlinFirmware/Marlin	2017-03-25 10:15:40 -05:00
Roxy-3D	aec85ad45a	Start of process to get UBL running again. The wait_for_user change totally broke UBL. But there is stuff wrong now in the thermal code and/or LCD Panel code.	2017-03-24 18:38:27 -05:00
Scott Lahteine	b47eaf14ae	Merge pull request #6109 from thinkyhead/rc_soft_pwm_dither PWM dithering followup	2017-03-24 18:21:07 -05:00
Scott Lahteine	34d1c41b5f	Merge pull request #6111 from benlye/benlye-patch-echo_command Fix type conversion issue with echo_command	2017-03-24 17:57:28 -05:00
benlye	6a601aca35	Fix type conversion issue with echo_command With the the current definition of echo_command I cannot compile RCBugFix (Arduino IDE 1.8.1) with the error "invalid conversion from 'const char' to 'char'". This change resolves that.	2017-03-24 17:23:02 +00:00
Scott Lahteine	009a6ddd39	Adjust bilinear grid in M851	2017-03-24 06:28:59 -05:00
Scott Lahteine	eab7854a73	Merge pull request #6074 from thinkyhead/rc_immediate_shove Immediate commands take precedence	2017-03-24 05:52:27 -05:00
Stefan BrÃ¼ns	5699e2b881	Add SOFT_PWM_DITHER to other configurations	2017-03-24 05:02:24 -05:00
Scott Lahteine	5a2abeca78	Merge pull request #6100 from thinkyhead/rc_soft_pwm_dither Enhancement of PWM, with dithering	2017-03-24 04:57:40 -05:00
Scott Lahteine	043be2856b	Use "& 0x3F" instead of "% 64"	2017-03-24 04:13:50 -05:00
Stefan Brüns	6a040a6967	SOFT_PWM: Do not switch off heaters twice on pwm_count wraparound After wraparound, pwm_count <= pwm_mask holds, thus soft_pwm_X <= pwm_count guarantees soft_pwm_X < pwm_mask is true, and the heater will be switched off in the first branch. Do not evaluate the pwm conditions a second time, this reduces the instruction count (4 instructions per PWM) and text size (6 byte). Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>	2017-03-24 04:13:50 -05:00
Stefan Brüns	0a74774af1	soft_pwm: avoid useless refetches of pwm_count The compiler is not able to reuse the value of pwm_count, but reloads it on every evaluation, if is stored in a static variable, as it cannot prove it will be unchanged. A variable with local scope may not be modified from the outside, so its value can be reused. Doing so reduces text size and instruction count. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>	2017-03-24 04:13:50 -05:00
Stefan BrÃ¼ns	35a55d5757	SOFT_PWM: Implement dithering if SOFT_PWM_SCALE is 1 or more If dithering is enabled, the remainder of the soft_pwm_X duty value at turnoff time is added to the next cycle. If e.g. the duty is set to 9 and SCALE is set to 2, the PWM will be active for 8 counts for 3 cycles and 12 counts on each fourth cycle, i.e. the average is 9 cycles. This compensates the resolution loss at higher scales and allows running fans with SOFT_PWM with significantly reduced noise. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>	2017-03-24 04:13:36 -05:00
Stefan Brüns	2aed66a955	temperature: Fix SOFT_PWM off by one A 128 step PWM has 127 intervals (0/127 ... 127/127 duty). Currently, a PWM setting of 1/127 is active for 2/128, i.e. double the expected time, or, in general n+1/128 instead of n/127. Fixes issue#6003. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>	2017-03-24 04:13:36 -05:00
Scott Lahteine	b5711a99a2	Patches to bring UBL closer to compliance	2017-03-24 01:37:52 -05:00
Scott Lahteine	d076c1b604	Apply some general cleanup to code	2017-03-24 01:37:51 -05:00
Scott Lahteine	d1e6b0e21a	Reduce STEP_PULSE_CYCLES code slightly	2017-03-24 00:50:05 -05:00
Scott Lahteine	783338a0b8	Add UBL_MESH_EDIT_ENABLED to configs	2017-03-24 00:44:55 -05:00
Scott Lahteine	8d54ffbf05	Adjust vector_3 code with const, some optimization	2017-03-23 19:41:42 -05:00
Roxy-3D	8ee2612ebb	The hex nibble routine can print again! The code to print a hex nibble got broke. SERIAL_ECHO( (char) ) isn't suitable for its use.	2017-03-23 16:08:37 -05:00
Roxy-3D	b8e4a6970b	Get UBL up and running again All the changes to get the code into compliance with Marlin coding standards made UBL sick. This pretty much gets UBL back up and running.	2017-03-23 16:08:37 -05:00
Roxy-3D	5de1da2b3c	Make UBL honor the #define ENABLE_LEVELING_FADE_HEIGHT option	2017-03-23 16:08:37 -05:00
Scott Lahteine	8f9face956	Merge pull request #6088 from rafaljot/patch-3 Update Marlin_main.cpp	2017-03-23 01:51:51 -05:00
Scott Lahteine	782634b6c9	Merge pull request #6081 from Sebastianv650/MIN_STEPPER_PULSE_for_Babystepping Add MINIMUM_STEPPER_PULSE ability to babystepping	2017-03-22 21:57:36 -05:00
Scott Lahteine	af2ea23e9c	EXTRUDER_RUNOUT_PREVENT uses buffer_line_kinematic	2017-03-22 20:51:12 -05:00
Scott Lahteine	cd882b88db	#if defined => #ifdef / PIN_EXISTS	2017-03-22 20:51:11 -05:00
Scott Lahteine	e244399766	Additional cleanup of UBL code	2017-03-22 20:51:10 -05:00
Bob-the-Kuhn	0934563b97	G38 optional double touch Made the double touch portion a conditional compile based on the PROBE_DOUBLE_TOUCH flag. ============================================== Bugfix The current G38 only stopped a move if it involved the Z axis. Moved all the G38 code to it's own section and put it where it would always be executed no matter what axis was moving or if the endstop was enabled. Also added a comment to configuration_adv to alert the user the double tap had to be turned on. ============================================== Change G38 back to using Z_MIN_PROBE There's no Z_MIN endstop if Z_DUAL_ENDSTOPS is enabled and you have them set to the top of the gantry. G38 started out as using the Z_MIN_PROBE pin. I don't remember why we changed it to the Z_MIN endstop.	2017-03-22 15:08:49 -05:00
Scott Lahteine	cc3204509c	UBL patch from Bob-the-Kuhn	2017-03-22 07:54:20 -05:00
Scott Lahteine	b904b5ae8d	Audible feedback for settings store/load/reset	2017-03-22 02:15:21 -05:00
Sebastianv650	bf57eb2447	Protect Babystepping against other ISRs Especialy against stepper ISR. This is even more important when a minimum pulse width is set, increasing the runtime of a babystep.	2017-03-21 18:05:44 +01:00
Sebastianv650	80830919dc	Add MINIMUM_STEPPER_PULSE ability to babystepping	2017-03-21 17:50:38 +01:00
rafaljot	6da949bbf0	Update Marlin_main.cpp Sometimes after killing heaters are still on.	2017-03-21 15:06:01 +01:00
Roxy-3D	72f7b14e66	Make G29's Interactive Mesh Editor Work	2017-03-20 12:52:51 -05:00
Roxy-3D	3fd74b121f	Get G29's Interactive Mesh Editor running G29 P4 R O should work now.	2017-03-20 12:52:51 -05:00
Roxy-3D	1d58558bec	Spelling fix	2017-03-20 12:52:51 -05:00
Scott Lahteine	2573f4dd05	Merge pull request #6052 from thinkyhead/rc_lift_on_pause Add PARK_HEAD_ON_PAUSE feature / M125	2017-03-20 03:36:31 -05:00
Scott Lahteine	48c6284c91	Immediate commands take precedence	2017-03-19 21:50:48 -05:00
Roxy-3D	76c270fdf2	Allow FWRETRACT with UBL Enabled The retraction flag in UBL's G26 was conflicting with the FWRETRACT option. All fixed!	2017-03-19 15:43:12 -06:00
Roxy-3D	c377c59d47	Allow G29 P1 R to generate the mesh Fix the logic change that happened when UBL got merged.	2017-03-19 15:13:33 -06:00
Scott Lahteine	ff0dd162b7	PARK_HEAD_ON_PAUSE implementation	2017-03-19 07:27:35 -05:00
Scott Lahteine	26473cab6d	Add PARK_HEAD_ON_PAUSE feature	2017-03-19 05:06:55 -05:00
Scott Lahteine	4cf51157b3	Use XYZE rather than NUM_AXIS	2017-03-19 01:14:39 -05:00
Scott Lahteine	4c7f14752a	Add disable_e_steppers function	2017-03-19 01:14:39 -05:00
Scott Lahteine	8eb29f91e6	Patch filament change options and beep code	2017-03-19 01:14:39 -05:00
Scott Lahteine	56c9dfc83b	Merge pull request #6066 from thinkyhead/rc_felix_fix Update Felix config for UBL	2017-03-19 01:11:02 -05:00
Scott Lahteine	9b2b53f63a	Merge pull request #6042 from thinkyhead/rc_fix_toolchange_z Move Z last in tool-change for SWITCHING_EXTRUDER	2017-03-19 00:34:41 -05:00
Scott Lahteine	f98fb6b38e	Update Felix config for UBL	2017-03-19 00:28:48 -05:00
Scott Lahteine	7cabe81373	Merge pull request #6057 from thinkyhead/rc_followup_6054 Followup 6054 with some cleanup	2017-03-18 13:49:20 -05:00
Scott Lahteine	4bca27ab89	Fix Kelvin conversion Thanks to @ospalh -- #6056	2017-03-18 13:23:08 -05:00
Scott Lahteine	143ab8f329	Remove Roxy's personal configurations	2017-03-18 12:35:02 -05:00
Scott Lahteine	2512871a36	Patch configs UBL followup	2017-03-18 12:32:03 -05:00
Scott Lahteine	27b5666e15	Move Allen Key probe definition to the top	2017-03-18 12:27:37 -05:00
Scott Lahteine	77cf648ed3	Move menu selection past static items in 1 screen	2017-03-18 12:26:21 -05:00
Scott Lahteine	2c630a1b5c	Merge pull request #6054 from thinkyhead/rc_ubl_renewal UBL for RCBugFix — cleanup, rebase, patch	2017-03-18 12:07:57 -05:00
Scott Lahteine	0492a3a8f1	Merge pull request #6027 from Bob-the-Kuhn/add_kill_info Message for every KILL and STOP	2017-03-18 11:49:35 -05:00
Scott Lahteine	6618346148	Patches to work around "register spill" compiler bug	2017-03-18 11:35:21 -05:00

... 13 14 15 16 17 ...

7340 Commits