bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
12,472 Commits 1 Branch 4 Tags 151 MiB
d6265df962
Commit Graph

10597 Commits

Author SHA1 Message Date
Scott Lahteine
785c01f2bc Use US spelling of 'behavior' 2019-05-15 01:49:17 -05:00
Sam Lane
7f1e0c5670 Update EXTRA_LINADV_K with Marlin bit macros (#13993) 2019-05-15 01:07:07 -05:00
Bob Kuhn
48bd8899bd Cohesion 3D Remix: Onboard SD card, Fysetc LCD (#13991) 2019-05-15 00:59:57 -05:00
FanDjango
dcaefc68a5 BLTouch.init should not deploy (#13988) 
Low or unknown probe clearance on init (even at powerup) is a risk and therefore, a deploy should be avoided because dragging the pin is possible: A deploy goes into alarm if it can't extend fully and then the subsequent stow will fail.
 2019-05-14 23:55:11 -05:00
Tanguy Pruvot
8075893352 STM32: fix sdcard filename conversion 2019-05-12 04:26:21 +02:00
chai-md
940ff8e7c8 Improve LV8729 stepping (#13776) 2019-05-11 19:02:19 -05:00
InsanityAutomation
991ee7552b Restore menu edit to 32bit value (#13976) 2019-05-11 18:44:35 -05:00
Tanguy Pruvot
93dd097b1c Use E2END, if defined, for STM32F1 (SD) (#13981) 2019-05-11 18:22:31 -05:00
InsanityAutomation
5108e4b6aa Cleaner EEPROM auto init (#13975) 2019-05-11 16:54:03 -05:00
Bob Kuhn
456a0ee76b Improve Due SW SPI, Fysetc sanity checks, &c. (#13939) 2019-05-11 16:51:39 -05:00
Robby Candra
7b78a20fb7 Fix: Debug Memory Dump size (#13957) 
* Fix Memory Dump size

* Fix Compile error on Memory Dump
 2019-05-11 11:44:39 -05:00
Scott Lahteine
a613bcad2d Fix some spelling 2019-05-10 20:39:19 -05:00
Tanguy Pruvot
62b36d1b98 Fix STM32 timer warnings (#13946) 2019-05-10 20:00:21 -05:00
Giuliano Zaro
f22c9a1ae1 Fix G-code parser with MMU2 (#13951) 2019-05-10 19:57:15 -05:00
Marcio Teixeira
746c38f4be Fix HAL_DUE multiple define error with graphical LCD (#13971) 2019-05-10 19:52:43 -05:00
Bob Kuhn
75eca5c4f8 Fysetc pins updates for RAMPS and SKR 1.3 (#13963) 2019-05-10 19:29:28 -05:00
Marcio Teixeira
227f29090d Add heater timeouts to ExtUI (#13970) 
- Add local UI methods to get heater timeout state.
- Add methods to resume timed-out heaters.
- Re-enable heaters on UI temperature request.
- Make `ExtUI` show a dialog box if pause needs a button press after reheat.
 2019-05-10 15:56:13 -05:00
Bob Kuhn
fa3739aa23 M100: LPC1768 and DUE compatibility (#13962) 2019-05-09 21:57:44 -05:00
InsanityAutomation
3f758d9e00 Fix some edit items for 16-bit encoder (#13948) 2019-05-09 18:28:47 -05:00
ManuelMcLure
51acbb2201 Prevent HOST_PROMPT_SUPPORT compile error (#13943) 2019-05-09 11:48:31 -05:00
Scott Lahteine
ad4ffa1d2f
Use C++ language supported 'nullptr' (#13944) 2019-05-09 11:45:55 -05:00
Tanguy Pruvot
e53d7e5517 STM32: ADC warning fix (#13933) 2019-05-09 00:33:38 -05:00
Scott Lahteine
23ec650410 Consolidate Malyan LCD and ExtUI 2019-05-07 21:31:30 -05:00
InsanityAutomation
6811e2921b BLTouch v3 / 3DTouch Interoperability & performance (#13814) 2019-05-07 21:25:54 -05:00
Giuliano Zaro
40aff7e1f2 Remove extra MMU (non-12V) code (#13938) 
`check_version` in state -5 should not be needed since it has already been called in state -4 and the tested build nr is only updated in state -4.
 2019-05-07 21:02:08 -05:00
Tanguy Pruvot
11adcf1ce3 Add'l PLR options, AVR strstr_P compat (#13880) 2019-05-07 20:38:40 -05:00
InsanityAutomation
5dcb25664f Option to Auto-Initialize EEPROM (#13935) 2019-05-07 16:30:31 -05:00
Ludy
a504366138 Fix probe fan compiling error (#13930) 2019-05-07 14:14:12 -05:00
Tanguy Pruvot
24e956d168 Avoid int8_t underflow on filament runout (#13895) 2019-05-07 13:58:10 -05:00
Stephan
483822f3aa Fix some THERMAL_PROTECTION_CHAMBER issues (#13678) 2019-05-06 19:55:01 -05:00
doggyfan
23a8707ef1 Configurable Thermistor (#13888) 2019-05-06 18:51:06 -05:00
J.C. Nelson
172abc305b Malyan M200 core fixes (#13927) 2019-05-06 18:07:13 -05:00
Scott Lahteine
a36782ac1d Define more u8g command macros 2019-05-06 17:26:34 -05:00
Scott Lahteine
f9a50f451d Serial out cleanup 2019-05-06 17:26:34 -05:00
Scott Lahteine
9853331b34 Fix temp init, loosen ADC grace period 2019-05-05 22:55:03 -05:00
Tanguy Pruvot
a4c24511f7 STM32: Fix Marduino SBI/CBI redefine (#13912) 2019-05-05 22:06:30 -05:00
Ludy
c837e9250c Define tmc variables where needed (#13918) 2019-05-05 22:04:47 -05:00
Ludy
f96eaad1ea Unused variable cleanup (#13917) 2019-05-05 22:01:04 -05:00
Ludy
421d526ba7 Update German language (#13915) 2019-05-05 22:00:19 -05:00
Giuliano Zaro
b07360f32a Update Italian language (#13916) 2019-05-05 21:59:34 -05:00
Robby Candra
79955f0c89 Fix PLR file delete bug (#13860) 2019-05-04 23:30:47 -05:00
ManuelMcLure
09f1b58146 Fix HOST_PROMPT_SUPPORT compile issue (#13847) 2019-05-04 22:55:51 -05:00
Giuliano Zaro
e2a77ed881 Bring chamber temp to completion (#13837) 2019-05-04 22:51:47 -05:00
Robert Mendon
24177954dd Add missing AZSMZ Mini SPI pins (#13824) 2019-05-04 22:04:01 -05:00
kAdonis
ee73e17c9b Hide 'vsense' report row if not used (#13884) 2019-05-04 22:00:24 -05:00
jmdearras
68004174d9 Fix thermistor 501 name (#13839) 2019-05-04 21:40:41 -05:00
Bob Kuhn
c48e6be366 Fysetc panel, RUMBA and ReARM pins, SPI mode 3 (#13900) 2019-05-04 17:59:36 -05:00
Chris
fd9d3ae181 Re-Arm 4x TMC2208 stepper improvement (#13819) 2019-05-04 17:26:13 -05:00
Tanguy Pruvot
e7b3720b81 Menu edit accel in increments of 25 (#13850) 2019-05-04 17:21:58 -05:00
Tanguy Pruvot
7da63fa03f Fix NOMORE() sign warning in stepper (#13894) 2019-05-04 15:59:38 -05:00
Roman Moravčík
6d0ce033c2 Update Slovak language. (#13840) 2019-05-04 15:58:01 -05:00
InsanityAutomation
3fcab8dbf1 Option to disable fans during pause (#13820) 2019-05-04 15:50:44 -05:00
Chris Pepper
66f7065248
[LPC176x] Update extra script to support Python3 (#13908) 2019-05-04 20:52:28 +01:00
Scott Lahteine
2f32a6612d Clean up Temperature::set_fans_paused 2019-05-04 14:36:59 -05:00
Marcio Teixeira
15357af67c Backlash cleanup (#13659) 
…And save backlash, fil. sensor, ExtUI userdata to EEPROM.
 2019-05-03 23:53:15 -05:00
Robby Candra
0181e57417 Add a minimum Z change option to power-loss recovery (#13859) 2019-05-02 22:29:05 -05:00
Robby Candra
c369477cb0 Fix bug: diveToFile breaks M23 (#13865) 2019-05-02 15:54:24 -05:00
Tanguy Pruvot
e5438a9a03 settings: store runout sensor on/off (#13876) 2019-05-02 00:47:26 -05:00
Scott Lahteine
e7682eea42
Use Arduino.h include wrapper (#13877) 2019-05-02 00:45:50 -05:00
Tanguy Pruvot
51d1e0f1dd Auto-mount the SDIO SD card (#13879) 2019-05-02 00:45:21 -05:00
Thomas Moore
ee243e4edf Fix mixing extruder filament change (#13803) 2019-05-01 21:55:58 -05:00
Scott Lahteine
bf54251a10
Finish, improve, clean up FYSETC_MINI_12864 revisions (#13871) 2019-05-01 20:05:29 -05:00
Scott Lahteine
9372e2603c Simpler neopixel comment 2019-05-01 13:55:51 -05:00
Tanguy Pruvot
3272d0db01 Update French language (#13866) 2019-05-01 13:00:07 -05:00
Chris Pepper
95beafa9a2
Fix typo 2019-05-01 16:30:21 +01:00
Ludy
408a5f08dc Update German language (#13853) 2019-05-01 01:25:57 -05:00
Tanguy Pruvot
cf3c746029 Improve French language (#13851) 2019-05-01 01:12:25 -05:00
Clinton James
2740cc64d8 Add SD Release when no SD_DETECT_PIN exists (#13857) 2019-05-01 01:00:21 -05:00
Luu Lac
39ebca6b5f Fix FYSETC, MINIPANEL, MKS_MINI_12864 display (#13864) 2019-05-01 00:37:52 -05:00
Giuliano Zaro
93dcb537ef Update Italian language (#13809) 2019-04-30 20:31:40 -05:00
Roxy-3D
142c8e2fed
Remove redundant Frivolous Game Options 2019-04-28 14:03:53 -05:00
Scott Lahteine
e43afb1a58 Clean up SKR pins 2019-04-27 14:56:12 +02:00
Scott Lahteine
9ccbd382e7 Update Watchdog description 2019-04-27 14:56:12 +02:00
Scott Lahteine
b6279abd30 Better THERMAL_PROTECTION_GRACE_PERIOD 
See #13783
 2019-04-27 14:40:09 +02:00
chai-md
ed9eaa1942 Fix a comment in fwretract.cpp (#13802) 2019-04-26 09:36:29 +02:00
InsanityAutomation
610fb46683 Fix some ExtUI issues (#13799) 2019-04-26 09:32:01 +02:00
Bob-the-Kuhn
db89fc0304 Revert "bring my copy up to date" 
This reverts commit 503905c628.
 2019-04-25 17:38:41 -05:00
Bob-the-Kuhn
503905c628 bring my copy up to date 2019-04-25 12:08:49 -05:00
Bob-the-Kuhn
73726d56b3 Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x 2019-04-25 12:06:01 -05:00
Scott Lahteine
5051909c3c
Update do_select_screen for general use (#13800) 2019-04-24 10:13:44 -05:00
Scott Lahteine
63f6ad3fd2 Basic RAMPS SD_DETECT_PIN override 2019-04-23 18:10:21 -05:00
InsanityAutomation
c6632925e3 Force no move on IDEX full control mode (#13797) 2019-04-23 15:20:59 -05:00
Giuliano Zaro
e2dd2268e8 Add a Z raise-between-probes to G34 (#13791) 2019-04-23 13:40:55 -05:00
Giuliano Zaro
0f9c49ccba Update Italian language (#13790) 2019-04-23 13:36:05 -05:00
Giuliano Zaro
d77ef437db Fix warning for redefined DEBUG_PRINT_P (#13789) 2019-04-23 13:35:02 -05:00
Marcio Teixeira
ca7f6ff287 Fix MSG_En messages for consistency (#13788) 2019-04-23 13:31:51 -05:00
Scott Lahteine
6ff81a33c1 Provide JSON values for SOFT_PWM_SCALE 2019-04-22 14:06:14 -05:00
Scott Lahteine
0c4d3e6622 Improve M906 description 2019-04-22 13:48:02 -05:00
Tanguy Pruvot
04ae3ba1fd Major update to French language (#13784) 2019-04-22 13:31:04 -05:00
chai-md
78d7349fd7 Remove extra Z raises in tool change (#13782) 2019-04-21 21:06:46 -05:00
Kajetan Rzepecki
875e673a8c Add HAL-based thermal protection grace period for all heaters (#13778) 2019-04-21 20:50:32 -05:00
Bob Kuhn
81ca5a4cd4 Fix and improve FYSETC LCD support (#13767) 2019-04-21 20:48:53 -05:00
felixstorm
4e35e6c705 Fix SS pin in ESP32 HW SPI (#13781) 2019-04-21 17:15:15 -05:00
felixstorm
4a48b70c0b Fix (re-)defines in HAL_ESP32 (#13780) 2019-04-21 17:14:38 -05:00
Ludy
4228fd3e03 Update German language (#13769) 2019-04-20 15:01:56 -05:00
Kajetan Rzepecki
5f70c876ae Fix _temp_error-related compile error (#13768) 2019-04-20 13:57:38 -05:00
Kajetan Rzepecki
ea1ee02b53 Disable hardware PWM on ESP32 I2S expander (#13762) 2019-04-20 13:41:17 -05:00
Scott Lahteine
bddb776ddb Add chamber max-temp check 
Followup to #13756
 2019-04-19 22:18:55 -05:00
Marcio Teixeira
d0c1eee53b Add extra max-temp safety checks (#13756) 2019-04-19 21:37:12 -05:00
Marcio Teixeira
4ac28ba6b3 Add missing file (#13754) 2019-04-19 20:20:45 -05:00
jmdearras
b65cb5704d Fix, improve FYSETC_MINI_12864 support (#13730) 2019-04-19 20:11:51 -05:00
Scott Lahteine
69c333ead9 More universal Formbot pins 
Replace `ROXYs_TRex` with pre-defines of the relevant pins at the configuration level.
 2019-04-18 21:09:34 -05:00
Scott Lahteine
0a6835fbea More robust HAS_LCD_CONTRAST 2019-04-18 21:09:34 -05:00
Marcio Teixeira
2e3d121ac4 Squelch compiler warning (#13739) 2019-04-18 13:18:49 -05:00
Kajetan Rzepecki
d83a7924e6 Fix ESP32 TOGGLE() with I2S expander (#13743) 2019-04-18 13:15:35 -05:00
Jimmy Wennlund
e6f6ed76c8 Show UBL Activate/Deactivate menu for current state (#13744) 2019-04-18 13:13:05 -05:00
Marcio Teixeira
08f21335a6 Fix bad opcode in LIGHTWEIGHT_UI; add 32-bit HAL and Due compatibility (#13751) 2019-04-18 13:10:58 -05:00
Kajetan Rzepecki
7c8ee0cd5b Enable more ADC1 channels (pins 32-39) (#13742) 2019-04-18 13:01:24 -05:00
Bob-the-Kuhn
520585c5ed Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x 2019-04-17 15:34:29 -05:00
Kajetan Rzepecki
e1acc09c6e Fix LPC1768 HAL SSD* screen init (#13741) 2019-04-17 14:57:50 -05:00
Marcio Teixeira
836435c5ef Fix action_edit int range bug (#13737) 2019-04-17 14:55:31 -05:00
Antonio Pérez
bf28ad4b6c Fix clear of Z position last digit (#13731) 2019-04-17 14:52:20 -05:00
Marcio Teixeira
866e2d41dc Correct range of LCD axis step editing (#13727) 2019-04-16 15:45:31 -05:00
Scott Lahteine
ab8052887f Add missing MSG_PAUSE_PRINT_INIT_1 for en 2019-04-16 13:54:20 -05:00
petrzjunior
12d340cf2a Update Czech language (#13729) 2019-04-16 13:53:14 -05:00
Robby Candra
e8dc87a2b7 Fix updated Allen Key pause probe logic (#13723) 2019-04-16 12:35:58 -05:00
Robby Candra
7ca1fea22b Option to pause probe deployment only when triggered, for manually-deployed allen-key probe (#13698) 2019-04-16 01:32:43 -05:00
Robby Candra
35160dfb7a Simplify PLR homing when Z homes to max (#13718) 2019-04-16 00:17:27 -05:00
Scott Lahteine
92ed9a2bb6 Fix is_M29 
Followup for #13013
 2019-04-15 23:47:06 -05:00
jmdearras
5f49b65c1f Move LPC SD options to configs, add MKS_MINI_DISPLAY to SKR boards (#13712) 2019-04-15 22:55:33 -05:00
Bob Kuhn
9b578ca343 Support FYSETC_MINI_12864 on Re-ARM, RAMPS_FD, MKS SBASE (#13717) 2019-04-15 22:54:11 -05:00
Scott Lahteine
9992c424f5 Patch G92.9 flags 
Followup to #13703
 2019-04-15 20:26:40 -05:00
ManuelMcLure
b1c13bce58 Fix EEPROM_CHITCHAT (and debug_out.h) (#13716) 2019-04-15 20:21:26 -05:00
Msq001
455ee23499 Fix, improve Power Loss Recovery (#13703) 
- Save and restore workspace offsets
- Add retract and purge (hidden) options
- Always restore axis relative modes
- Use added `G92.9` to do position restores
 2019-04-15 18:53:39 -05:00
Laurent
df75a606ff Support MKS SGen board (#13694) 2019-04-15 17:03:10 -05:00
Kajetan Rzepecki
20dc45bca7 Refactor, fix ESP32 WebSocketSerial (#13689) 2019-04-15 16:32:20 -05:00
Roman Moravčík
db373f130c Update Slovak language (#13692) 2019-04-15 16:14:49 -05:00
Kajetan Rzepecki
6fe90f0324 Define I2S pins for ESP32 (#13714) 2019-04-15 16:13:59 -05:00
InsanityAutomation
aa0f7afbe6 Fix call to uninitialized PWM pin, heater 2 overlap (#13674) 2019-04-15 15:57:34 -05:00
Bob-the-Kuhn
57aaa9110b Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x 2019-04-13 21:14:52 -05:00
Scott Lahteine
6a71df2925 Tweak babystep add_steps 2019-04-13 14:14:26 -05:00
Bob-the-Kuhn
9dd4252b39 Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x 2019-04-12 22:07:12 -05:00
Marcio Teixeira
bdfffee037 Modify Z-offset overlay for clarity (#13660) 2019-04-12 15:43:29 -05:00
Stephan
84273557f9 Move and update heated chamber settings (#13671) 
Co-Authored-By: the-real-orca <stephan.veigl@gmail.com>
 2019-04-12 15:38:10 -05:00
Ludy
62b4265410 Update German language (#13665) 2019-04-12 14:48:13 -05:00
Scott Lahteine
b18316dd37 Fix some spacing 2019-04-12 13:35:42 -05:00
Scott Lahteine
f2ba0a5ae7 Tweak some formatting 2019-04-12 13:15:37 -05:00
Scott Lahteine
7e58d33a2e Update some headers 2019-04-12 13:04:04 -05:00
Giuliano Zaro
64ee064ded Update Italian language (#13661) 2019-04-12 12:22:43 -05:00
Scott Lahteine
14b561f182 Extra AxisEnum values for E0-E5 2019-04-12 12:13:48 -05:00
Robby Candra
9e86fc3831 Require homing to toggle leveling (#13652) 2019-04-11 14:09:41 -05:00
Ludy
9fd3e64ba8 Fix compile error with EXTRUDER>1 (#13651) 2019-04-11 13:58:50 -05:00
Jamie
509dc283f2 Restore declarations of G53-G59 (#13654) 2019-04-11 13:51:05 -05:00
chai-md
2adc37becc MAGNETIC_SWITCHING_TOOLHEAD (#13629) 2019-04-11 13:29:17 -05:00
ManuelMcLure
492883859e Don't protect unused CS pins (#13647) 2019-04-10 21:57:57 -05:00
Scott Lahteine
9898f53361 Fix missing IS_SD_PRINTING 2019-04-10 21:48:16 -05:00
Scott Lahteine
1e59a2ac73 Hide pause/stop unless active printing 2019-04-10 19:46:59 -05:00
Scott Lahteine
ae42206500 Fix SD_REPRINT_LAST_SELECTED_FILE 2019-04-10 17:43:08 -05:00
Scott Lahteine
d72946a8d7 Fix LPC1768 build with no watchdog 
Fix issue mentioned at https://github.com/MarlinFirmware/Marlin/pull/13587#issuecomment-481737509
 2019-04-10 17:34:15 -05:00
Scott Lahteine
cee3b172b9
Fix Marlin splash screen logic (#13646) 2019-04-10 17:14:57 -05:00
ANMay-ru
052f2ac352 Fix RURAMPS4D baud rate (#13644) 2019-04-10 15:53:21 -05:00
Marcio Teixeira
e6ebd30f60 Fix LCD issue on stepper timeout (#13630) 
- Remove a re-paint of the status screen on stepper timeout, which would cause a garbled LCD with `LIGHTWEIGHT_UI` and could interrupt whatever else the user might be doing in a submenu (such as playing games!)
- Use the helper function to reset stepper timeout.
 2019-04-10 15:51:48 -05:00
klcjr89
a8edd4f6d4 Fix Azteeg X5 MINI BOARD_NAME (#13632) 
Co-Authored-By: klcjr89 <klcjr89@users.noreply.github.com>
 2019-04-10 15:46:12 -05:00
Scott Lahteine
5018fdacbe
Support FYSETC_MINI_12864_PANEL (#13365) 2019-04-09 18:34:29 -05:00
InsanityAutomation
4900c28bf6 Fix IDEX tool-change, and more (#13614) 2019-04-09 18:33:40 -05:00
InsanityAutomation
ba31d39f6d Azteeg X5 Mini support (#13425) 2019-04-08 23:10:45 -05:00
Scott Lahteine
9cb5c57b84 Adjustments to ui8tostr_percent 2019-04-08 21:47:50 -05:00
Scott Lahteine
321a5e6580
Fix SD card reselect when scrolled (#13624) 
- Change encoder position to 16-bit integer.
- Fix `SD_REPRINT_LAST_SELECTED_FILE` when the screen is scrolled.
 2019-04-08 21:10:41 -05:00
Scott Lahteine
0e3c9e726d Set default Raptor runout/caselight pins 2019-04-08 18:18:08 -05:00
Scott Lahteine
5e38d70697 Fix M217 report label, general cleanup 2019-04-08 18:18:08 -05:00
Scott Lahteine
fae2b7edc3 Update MMU2 code style 2019-04-08 18:13:42 -05:00
Scott Lahteine
c8a83fb122 SPINDLE_LASER_ENABLE => SPINDLE_LASER_ENA 2019-04-08 18:13:41 -05:00
Scott Lahteine
9abe9aff56
Confirm before starting SD print (#13616) 2019-04-08 13:44:35 -05:00
Scott Lahteine
7e0008f5b3 Fix SETCURSOR_RJ 2019-04-07 20:25:54 -05:00
Robby Candra
81c2c3ec11 Continuous filename scrolling (#13609) 2019-04-07 16:58:32 -05:00
Ludy
c29820f649 Suppress compile warning (#13612) 2019-04-07 16:53:30 -05:00
Scott Lahteine
a2b3ad6d0a Don't override RGB LED pins, by default 2019-04-07 16:42:26 -05:00
Bob Kuhn
9a56d90150 Fix M43 on LPC176x (#13587) 
The real fix. PR #13568 was wrong.
 2019-04-06 18:06:07 -05:00
Roxy-3D
9cee81d47e Option to show babysteps total since G28 (#13580) 2019-04-06 18:04:34 -05:00
Scott Lahteine
3221658a78 Adjust park position description 2019-04-05 20:40:50 -05:00
Scott Lahteine
028b78f623 Suppress a compile warning 2019-04-05 20:06:19 -05:00
Scott Lahteine
cf12fc8366
Expand on serial debugging (#13577) 2019-04-05 20:02:46 -05:00
Marcio Teixeira
bf7b28b456 Fix incorrect variable name (#13585) 2019-04-05 19:04:46 -05:00
Kajetan Rzepecki
27693cec29 Extend ESP32 HardwareSerial with flushTX. (#13588) 2019-04-05 19:04:02 -05:00
Alexander Gavrilenko
3c47e1b4d1 Support Black STM32F407VET6 with RAMPS-like shield (#13524) 2019-04-05 15:30:19 -05:00
VBen
0dfd76ba55 Fix Z hotend offset broken by parking extruder tool change (#13582) 2019-04-05 15:28:32 -05:00
Scott Lahteine
027a901bec Trim whitespace 2019-04-05 15:04:23 -05:00
Kajetan Rzepecki
692a0198f9 Fix SPISettings frequency parameters in ESP32 HW SPI (#13573) 2019-04-04 23:17:14 -05:00
Kajetan Rzepecki
63d95862fa Add FastIO TOGGLE for ESP32 (#13574) 2019-04-04 23:15:17 -05:00
drzejkopf
0992d1a4c8 Fix Invaders game compile error (#13575) 2019-04-04 23:13:11 -05:00
Robby Candra
cd1ef33c8c Drop extra PLR save test (#13554) 2019-04-04 22:47:00 -05:00
Scott Lahteine
72c7751768 Fix SERIAL_POS in use with DEBUG_OUT 2019-04-04 22:12:03 -05:00
Scott Lahteine
cacec5764a Clean up whitespace 2019-04-04 22:12:02 -05:00
Scott Lahteine
83e214478e Click-hold to exit Invaders, fix Brickout compile 2019-04-04 17:07:50 -05:00
Scott Lahteine
240ea1bbb3 Split up games into separate files 2019-04-04 03:06:19 -05:00
Marcio Teixeira
27a4927ed1 Add option to move away from endstop after homing. (#13557) 
Add option to move away from endstop after homing.
- Add `ENDSTOP_BACKOFF` for printers with a recessed Z home button (Lulzbot TAZ 6).
- Also prevents chattering when sensorless homing with axes against bumpers.
 2019-04-04 02:47:19 -05:00
InsanityAutomation
d44e5b1fde Fix stepper direction macros, multi-nozzle scope (#13569) 2019-04-04 02:44:07 -05:00
Scott Lahteine
10b9632bed Fix menu history item selection 2019-04-04 02:41:23 -05:00
Scott Lahteine
f1810689ff Fix bootscreen condition 2019-04-04 00:19:47 -05:00
Kajetan Rzepecki
b21ca53dfc SPIFFS-backed PersistentStore for ESP32 (#13566) 2019-04-03 20:28:26 -05:00
Scott Lahteine
af92ee9dd6 No PLR include needed in queue.cpp 2019-04-03 18:26:31 -05:00
Scott Lahteine
5d2c5877f7 DOGM bootscreen cleanup 2019-04-03 18:10:50 -05:00
Scott Lahteine
2aa35e95af More G26 arc cleanup 
Followup to #13531
 2019-04-03 16:03:21 -05:00
Scott Lahteine
20a41e2f7b SDCARD_RATHERRECENTFIRST with SDCARD_SORT_ALPHA 2019-04-02 22:25:18 -05:00
Robby Candra
46445a5a16 Event G-code for Stop SD Print (#13547) 
Co-Authored-By: 7eggert <7eggert@gmx.de>
Co-Authored-By: robbycandra <robbycandra.mail@gmail.com>
 2019-04-02 22:09:30 -05:00
Kajetan Rzepecki
2cfa9e9008 Fixed chamber-related compile error (#13552) 2019-04-01 17:53:56 -05:00
Scott Lahteine
a0a5c31c05
Power-Loss initialization fix (#13553) 
- Only save to PLR file on moves with E and X or Y
- Save to PLR after any long-ish Z downward move
 2019-04-01 17:52:45 -05:00
Scott Lahteine
8b7c3eec83 Games, for fun (and stress-testing) (#13464) 2019-04-01 17:48:54 -05:00
InsanityAutomation
fbc7b51a24 Use NO_FETCH for Dual X G28 (#13539) 2019-04-01 17:48:21 -05:00
Scott Lahteine
5de7b5b35e
Games, for fun (and stress-testing) (#13464) 2019-04-01 15:43:48 -05:00
InsanityAutomation
4961d8aa3e Update G28.cpp (#13539) 2019-03-31 19:50:40 -05:00
Scott Lahteine
de0046fc8b Fix empty HAS_TIMER macros 2019-03-30 23:04:40 -05:00
Kajetan Rzepecki
c9079165ee Fix MAX6675 readout with Hardware SPI (#13530) 2019-03-30 22:31:49 -05:00
ManuelMcLure
04086fc455 Minor optimization to ARC_SUPPORT code (#13531) 2019-03-30 22:29:37 -05:00
Robby Candra
a3f67acd6d Fix Power Loss Recovery file delete (#13522) 2019-03-30 13:14:58 -05:00
Marcio Teixeira
d992dfe7d5 Use the percent util func in the string func. (#13523) 2019-03-30 13:00:31 -05:00
drzejkopf
b1f739e27b CR10_STOCKDISPLAY support in Bigtreetech SKR (#13516) 2019-03-29 14:19:18 -05:00
Marcio Teixeira
5679fae11e UltraLCD enhancements (lower fan resolution, backlash menu) (#13519) 2019-03-29 14:07:43 -05:00
Msq001
f0d14b83bc Save/restore Relative modes in Power-Loss Recovery (#13501) 2019-03-29 13:40:42 -05:00
Marcio Teixeira
c6466c23fe Silence signed/unsigned comparison warning. (#13508) 2019-03-29 13:33:45 -05:00
InsanityAutomation
7240e3a68f Allow G26 with no heated bed (#13511) 2019-03-29 13:32:43 -05:00
Alexander Gavrilenko
6d9aaca082 Fix compilation error for MKS Robin (#13506) 2019-03-29 12:40:24 -05:00
Scott Alfter
c6dbe6e9d6 Fix Teensy 3.5/3.6 __get_primask (#13514) 2019-03-29 12:23:09 -05:00
Alexander Amelkin
e40636a7c1 Replace digitalPinHasPWM with HAS_TIMER (#13520) 2019-03-29 12:21:14 -05:00
Scott Lahteine
b46ca9aa94 Less timely comment, tweak conditions 2019-03-26 19:20:13 -05:00
InsanityAutomation
eb91f08725 Update descriptions and dont call unneeded functions 2019-03-26 11:24:52 -04:00
Ludy
fe346cd4d1 Fix DEBUG_EEPROM_READWRITE compile error (#13492) 2019-03-26 04:12:22 -05:00
Sam Lane
e3ab54753b Add extra Linear Advance factors (#13490) 2019-03-26 04:02:27 -05:00
Chris Pepper
ffc2c2d7c5 Move FAST_PWM_FAN code to HALs (#13491) 2019-03-26 01:03:23 -05:00
Thomas Moore
263f8edff8 Disable volumetric extrusion during G26 (#13479) 2019-03-25 22:41:52 -05:00
Bob Kuhn
6bd0a0be97 Relocate DUE Stepper ISR to TC0,2 (#13481) 2019-03-25 22:39:51 -05:00
Thomas Moore
13a12f8a87 Fix UBL mesh editor on delta (#13478) 2019-03-25 22:04:57 -05:00
Scott Lahteine
d2e0c03afb Remove trailing whitespace 2019-03-25 20:51:38 -05:00
Marcio Teixeira
7462fe3068 Fix compile error, squelch warnings (#13487) 
- Fix path to `bedlevel.h` include file
- Add default to `case` statements to suppress warnings
 2019-03-25 20:41:38 -05:00
Yannik Sembritzki
0d3ea59bcf Add pins for Dual Z UART on SKR 1.3 (#13474) 
Fix #13470
 2019-03-24 20:09:00 -05:00
pinchies
ef3b93daa1 Fix STM32F1 SD-based EEPROM emulation (#13475) 
If `openFile` is given `true`, then it has read-only access. Because all the writing occurs on the next line, this breaks SD card as EEPROM.
 2019-03-24 20:07:31 -05:00
Chris Pepper
aacc1148b0 Fix M106 for index > extruders (#13473) 2019-03-24 20:03:53 -05:00
Thomas Moore
c5e96544b5 Fix vtool compiler warning (#13476) 2019-03-24 20:02:28 -05:00
Thomas Moore
02dc72acb6 Disable ABL when leveling corners (#13471) 2019-03-24 20:01:18 -05:00
7eggert
d96f7d6068 Minimum segments for G2/G3. Better for small arcs. (#13466) 2019-03-24 19:53:47 -05:00
Scott Lahteine
380c771988 Handle word-padded flash-based eeprom (STM32F1) 
Fix #13445
 2019-03-24 19:14:04 -05:00
Scott Alfter
32332bcd03 Proceed with Teensy 3.5/3.6 HAL (#13450) 2019-03-24 00:08:32 -05:00
Scott Alfter
407202cc0f Fix BLTouch pre-3.0 compatibility (#13454) 2019-03-23 23:28:15 -05:00
Marcio Teixeira
a0ca98f699 Additional ExtUI features (#13449) 2019-03-23 23:09:18 -05:00
Sam Lane
a8fa275dc6 Fix Fan 0 responding to all fan speeds (#13444) 2019-03-23 23:00:31 -05:00
InsanityAutomation
5eeffab5e5 Fix BLTouch Menus (#13441) 2019-03-23 22:58:34 -05:00
Scott Lahteine
d8329d858d Default argument to defer_status_screen 2019-03-23 16:33:37 -05:00
Giuliano Zaro
9562a02c5a Update Italian language (#13440) 2019-03-20 18:26:55 -05:00
drzejkopf
70e6a3db8a Add LEVEL_CORNERS_HEIGHT to LEVEL_BED_CORNERS (#13439) 2019-03-20 18:26:12 -05:00
Roman Moravčík
f3cf95a937 Update Slovak language. (#13435) 2019-03-20 16:37:34 -05:00
Scott Lahteine
144018736a Use USES_Z_MIN_PROBE_ENDSTOP 2019-03-18 16:58:31 -05:00
InsanityAutomation
5b2c37d6c1 Followup to BLTouch (#13422) 2019-03-18 16:31:11 -05:00
InsanityAutomation
3fb8489ae3 EXTUI and UBL compilation fixes (#13420) 2019-03-17 07:57:54 -05:00
Scott Lahteine
b376c7e374 Group DISABLED items 2019-03-17 07:56:35 -05:00
Scott Lahteine
58bca67883 Unify status scrolling further 2019-03-17 07:56:35 -05:00
Scott Lahteine
c4443f885e finishstatus => finish_status 2019-03-17 07:56:35 -05:00
InsanityAutomation
691e5c3bb8 BLTouch V3.0 support (#13406) 2019-03-17 05:57:25 -05:00
Scott Lahteine
49cf92dc36
Extended condition macros (#13419) 
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
 2019-03-16 23:43:06 -05:00
Tobias Frost
d20eab4f83 Fix macro in set_color() (#13417) 2019-03-16 19:05:59 -05:00
Ludy
59353546e8 Fix BUTTON_EXISTS and misplaced comma (#13411) 
Fixes #13410 and redeclaration of `BUTTON_EXISTS`
 2019-03-16 11:59:12 -05:00
InsanityAutomation
09eb30dc05 IDEX Mirror mode based on Formbot / Vivedino Symmetric mode (#13404) 2019-03-15 22:46:27 -05:00
Scott Lahteine
5c1aa5162d Adjust M206 output in M503 for DELTA 2019-03-15 19:20:40 -05:00
Scott Lahteine
ad8b82d054 Fix KILL_PIN assignment for MKS_MINI_12864 
According to #13397
 2019-03-15 19:20:40 -05:00
Scott Lahteine
3a916b4ef2 Create bresenham.h 2019-03-15 19:20:39 -05:00
Karl Andersson
5d3928cb01 PWM is not defined on Arduino Core STM32 (#13405) 2019-03-15 19:14:06 -05:00
Scott Lahteine
9a515cbd32
Fix Pause Print message and behavior (#13394) 2019-03-14 02:26:07 -05:00
Scott Lahteine
f5bcc00570
Unify debugging output with debug_out.h (#13388) 2019-03-14 02:25:42 -05:00
Andrei Pozolotin
cc8a871705 Add capability string CHAMBER_TEMPERATURE (#13391) 
Reference: #13380
 2019-03-13 18:09:22 -05:00
Scott Lahteine
67bee06e43 No patch needed for non-libmaple analogWrite 
See https://github.com/pinchies/Marlin/pull/1#issuecomment-471388743
 2019-03-13 07:21:10 -05:00
Scott Lahteine
f89b375fb9
Fixes and improvements for PWM pins (#13383) 2019-03-13 06:51:15 -05:00
Scott Lahteine
87162658c4
Fix and improve software endstops (#13386) 2019-03-13 05:48:36 -05:00
Scott Lahteine
6214c997c0 Remove includes of <binary.h> 2019-03-13 05:32:33 -05:00
Scott Lahteine
4555ae448f Fixups for ESP32 2019-03-13 05:32:33 -05:00
Scott Lahteine
a5ea3e2f15 Fix hotend offset on switching toolhead change 
See commentary at #11623
 2019-03-13 05:32:21 -05:00
jmz52
8e0ac93d60 Fix 'UNUSED redefined' compiler warning (#13387) 2019-03-13 04:34:02 -05:00
Hadrien Jouet
0278ad0a6d Add ESP32 WiFi interface (#11209) 2019-03-13 00:48:08 -05:00
InsanityAutomation
c03df89921 ExtUI Mesh Leveling Extensions (#13363) 2019-03-13 00:45:52 -05:00
InsanityAutomation
050eac03af Single X Duplication Extension (#13373) 
* Multi-nozzle selective duplication
* Use a bit-mask, reduce stepper_indirection.h size
* Tweak the multi-nozzle duplication description
* Use 'S' as a bool in M605
* Add HAS_DUPLICATION_MODE conditional
* Remove '_MODE' from the option name
* M605 in the style of Stacker M280
* Also include direct mask style (P)
 2019-03-13 00:42:50 -05:00
Scott Lahteine
ad91476d26 Fix USEABLE_HARDWARE_PWM 2019-03-13 00:12:46 -05:00
Scott Lahteine
d63da4592d Tweak to SCARA_move_to_cal 2019-03-12 22:06:50 -05:00
Scott Lahteine
51ff5b68fa Clean up fastIO ahead of PWM patch 2019-03-12 20:39:55 -05:00
Scott Lahteine
388babbcea Tweak SERIAL_PRINTF 2019-03-11 20:58:27 -05:00
Scott Lahteine
d94e077901 Apply HAS_HOTEND_OFFSET where needed 2019-03-11 20:58:27 -05:00
Scott Lahteine
11d6a939df Always define axis_unhomed_err 2019-03-11 20:58:27 -05:00
7eggert
10c8c034bd Allow both encoder and ADC keypad (#13355) 2019-03-11 18:10:56 -05:00
Andrei Pozolotin
31ff7da7ac Add missing CHAMBER options (for M141) (#13371) 2019-03-11 16:50:07 -05:00
Scott Lahteine
0375e92847 Followup to serial rework 
As mentioned in #13370
 2019-03-11 16:46:04 -05:00
jmz52
013bb469ca Fix compilation for STM32F1 with no SDIO (#13366) 2019-03-11 16:40:51 -05:00
Scott Lahteine
e52bcc9408 Limit top bed temp to BED_MAXTEMP - 10 
The chances of a 10° overshoot is pretty minimal.
 2019-03-11 16:32:34 -05:00
Scott Lahteine
98b55421a5 Clean up some temp config 2019-03-11 16:31:23 -05:00
InsanityAutomation
785a7028bf Followup to 'volatile' patch (#13369) 
Originally #13344
 2019-03-11 15:01:57 -05:00
Scott Lahteine
aa1d587128 Some LCD code cleanup 2019-03-11 05:07:31 -05:00
Scott Lahteine
fa11427ec6 Remove obsolete LCD_CONTRAST 2019-03-11 03:33:07 -05:00
pinchies
4df9509ead Add support for printers with inverted fan pins (#13362) 
Add support for printers with inverted fan pins by adding `#define FAN_INVERTING 1` to `Configuration_adv.h` and modifying the fan write macros.
 2019-03-10 20:51:21 -05:00
Scott Lahteine
1f7e220387 Make HAL ISR macros function-like 2019-03-10 20:44:27 -05:00
Scott Lahteine
e3ce346f24 Report position to host in Nozzle::park 2019-03-10 19:09:28 -05:00
Scott Lahteine
77b4176152 Use lib include for bit_constants.h 2019-03-10 19:09:28 -05:00
Scott Lahteine
3419099f0a Clean up whitespace 2019-03-10 19:09:28 -05:00
pinchies
4c43e6c48b Fix "spontaneous heating" issue (WRITE bug) on STM32 (#13356) 
Should fix "spontanous heating" problems due to order of operations error. Error occurs at least with ststm32 v5.1.0 in PlatformIO.
 2019-03-10 17:25:54 -05:00
Michiel Baird
b824a517aa Add G38.4 and G38.5 (#13348) 2019-03-10 17:22:09 -05:00
Bruce j Beare
e4d080e63c Reset after kill with a button on the KILL_PIN (#13091) 2019-03-10 09:57:38 -05:00
MoellerDi
c36989c39e Fix chamber temperature measurement (#13350) 2019-03-10 09:51:13 -05:00
Scott Lahteine
12503fce06 Followup to wait_for_user fix 2019-03-10 09:14:02 -05:00
Scott Lahteine
33a08fc6f7 Fix typos from temperature rework 
Followup to #12201
 2019-03-10 08:28:16 -05:00
Tobias Frost
2efbcc90c5 Fix wait_for_user compile error (#13352) 2019-03-10 08:07:41 -05:00
Tobias Frost
60e82e3929 Send notifications to ExtUI for M0/M1 (#13344) 
- Send notifications to ExtUI for M0/M1

- wait_for_user can be non-volatile (not changed by interrupt)
  C / C++ compilers don't optimize away reads of non-volatile variables when a function call is used between accesses, because *any* variable could be changed by the function call. Since `wait_for_user` can't be changed without a function call, it should be non-volatile so the compiler can optimize away cases where it is read more than once without an intervening function call.
 2019-03-09 14:20:37 -06:00
Marcio Teixeira
00fc43144a Follow up fixes to various PRs. (#13334) 
- Ensure `MarlinUI:get_progress` is defined for `ExtUI`.
- Fix for `BACKLASH_SMOOTHING` with small segments.
  `BACKLASH_SMOOTHING` with extremely small segments failed to fully correct due to the correction factor being rounded down. Rounding up ensures the entire backlash will converge to zero even for small segments.
- Add pinout for the beta revision `EINSY_RETRO`.
- Update soft endstops with tool offsets (for toolchange et. al. move clamping) (#12568)
 2019-03-09 14:20:37 -06:00
Scott Lahteine
c7d618b4d9 Fix SERIAL_ECHOLNPAIR 
Fix #13333
 2019-03-09 14:20:37 -06:00
InsanityAutomation
d54741eda8 Update some G26 plausible values. Add speed control. (#13330) 2019-03-08 03:13:44 -06:00
Msq001
fb3302feda Fix STM32F1 Serial and ADC pins (#13331) 2019-03-08 02:21:32 -06:00