93af8aa157
Fix home_delta for SENSORLESS_HOMING ( #10145 )
2018-03-17 20:52:06 -05:00
c6ff39cc14
Spacing cleanup
2018-03-17 16:49:08 -05:00
a6feb58837
Delta support for multiple hotends with offsets ( #10118 )
2018-03-16 00:46:42 -05:00
1e946d681d
Update Marlin for newest TMC libraries
...
- TMC2130Stepper v2.2.0
- TMC2208Stepper v0.0.4
2018-03-15 22:23:31 -05:00
4aebe3d82e
Pretty up EEPROM port args
2018-03-14 22:44:25 -05:00
51bf3c9503
Fix E direction for MK2_MULTIPLEXER with LIN_ADVANCE
2018-03-14 07:56:18 -05:00
e7a61de8af
[2.0] FWRetract Reset (Best way) ( #10083 )
2018-03-14 01:35:30 -05:00
e7570f3195
Improve TMC config organization, naming
2018-03-14 00:18:41 -05:00
07cf2cd9c4
Fix sensorless_homing_per_axis compile warning
2018-03-14 00:18:40 -05:00
14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) ( #10069 )
...
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
2018-03-13 01:15:22 -05:00
468f34104b
Patch do_blocking_move_to so 'destination' can be used
2018-03-12 08:16:17 -05:00
28f1276286
[2.0.x] Add Z_AFTER_PROBING option ( #10058 )
...
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
2018-03-11 13:07:55 -05:00
751785fc97
Followup to recent patches
...
- `M666` is static, not inline
- Disambiguate some stepper macros
2018-03-10 21:41:17 -06:00
a0211f5d6c
Disambiguate else in stepper_indirection.h
2018-03-10 19:56:22 -06:00
f10c87b442
Update Endstops class for 1.1.x parity
2018-03-10 06:57:31 -06:00
239902f861
Fix E2END and add EEPROM to Smart RAMPS
...
Reference #9983
2018-03-10 06:57:31 -06:00
419d12ca1b
Add UNKNOWN_Z_NO_RAISE option
...
With this option enabled, Z won't ever be raised until after `G28` has been completed, and it won't raise if Z becomes unknown. This is good for machines whose beds fall when Z is powered off.
2018-03-10 00:17:34 -06:00
3b4c89e4b5
Move do_probe_raise closer to set_probe_deployed
...
…and limit the raise to Z_MAX_POS
2018-03-10 00:17:34 -06:00
2908e76151
Fix position_is_reachable_by_probe typo, add comment
...
Fix #10029
2018-03-10 00:15:41 -06:00
161ff9ff35
Fix UPDATE_ENDSTOP for CorePQ compatibility
...
Fixes #9939
2018-03-09 08:54:48 -06:00
49ca67202f
Patch configuration_store for extra serial port
...
Fix #9948
2018-03-09 07:42:27 -06:00
16a8edc5f0
Add more delay before pulse off in Linear Advance ISR
...
A capital idea from https://github.com/MarlinFirmware/Marlin/pull/9914#issuecomment-371614153
2018-03-09 05:26:29 -06:00
dfd5d2fe75
Have position_is_reachable_by_probe use the whole bed ( #10020 )
...
Previously `position_is_reachable_by_probe` was limited to the area specified for `G29` mesh leveling (even if leveling was disabled). This change will properly consider the entire bed area so that `G30` and other non-leveling probing may take place.
2018-03-09 03:37:30 -06:00
3c2bfa5e53
Update powersupply_on in power_on/off ( #10015 )
...
Fix #10004
2018-03-08 18:56:47 -06:00
8d32fd997f
Wrap NORM_E_DIR/REV_E_DIR macros in do{}while(0)
2018-03-08 16:20:24 -06:00
98d48fc731
Followup to HAL_timer_restrain
...
Followup to #9985
2018-03-07 22:18:37 -06:00
a1a88ebabc
HAL function to ensure min stepper interrupt interval ( #9985 )
2018-03-07 17:53:25 -06:00
9515e5aefb
Fix LA_active_extruder (static)
2018-03-07 05:49:20 -06:00
e5ec793f7e
Wrap stepper indirection macros
2018-03-07 05:42:45 -06:00
5b85464791
Fix for LA ( #9964 )
...
Missed in the original LA 1.5 PR: eISR has to use a local copy of
current_block->use_advance_lead because it might still run wenn the last
block has been set to NULL.
2018-03-07 05:33:13 -06:00
ffbf63e6af
Add HAS_TEMP_SENSOR conditional
2018-03-07 01:53:50 -06:00
2057177184
Make enums into implicit char
2018-03-06 23:39:56 -06:00
ca0def766e
LIN_ADVANCE single stepper optimization
2018-03-06 19:26:54 -06:00
8291ae34f2
Support duplication mode in LIN_ADVANCE
2018-03-06 19:12:23 -06:00
0dd1c4458d
Put more code between pulse start and stop ( #9959 )
2018-03-05 23:06:57 -06:00
36262a0479
Use static classes for job timers ( #9938 )
2018-03-04 21:23:43 -06:00
930720bbbb
Fix broken reverse planner ( #9943 )
...
From #9914 by @Sebastianv650
2018-03-04 21:19:06 -06:00
025118da3e
Init print_job_timer in setup() instead of "early" ( #9937 )
2018-03-04 16:23:44 -06:00
07ae23fe14
No pulse delay on last e_steps in advance isr
2018-03-04 15:06:31 -06:00
ed758de80d
tweak comment in stepper.cpp
2018-03-04 04:03:23 -06:00
d1dc863962
autotemp_factor is not value_celsius_diff
...
See https://github.com/MarlinFirmware/Marlin/issues/9852#issuecomment-369861822
2018-03-03 23:27:54 -06:00
f3914a432e
Clear retracted status when homing the Z axis
2018-03-03 23:18:40 -06:00
6d7f4f84e2
Add board MKS_BASE_HEROIC ( #9926 )
...
Followup to #9008
- Don't define micro-stepping pins for boards that lack them.
- Allow setting of 128 microsteps with `M350`.
2018-03-03 23:14:52 -06:00
649f375494
Fix: M112 calling kill from interrupt ( #9923 )
...
Fix #9906
2018-03-03 23:14:01 -06:00
23a576faf7
[2.0] Fix for FW retract ( #9878 )
2018-03-01 15:15:40 -06:00
91db7930dc
Drop SCARA_FEEDRATE_SCALING
...
The updated planner takes the length of the move, so this pre-calculation is no longer needed.
2018-03-01 04:30:41 -06:00
1746749361
Followup to #9868
2018-03-01 01:53:12 -06:00
a446433c87
Fix SENSORLESS_HOMING for Core Kinematics ( #9868 )
2018-03-01 01:37:31 -06:00
c22f8dd660
Get duration_t in printcounter.h for its clients ( #9843 )
2018-02-28 04:15:29 -06:00
966d9af98a
Mesh export in Bilinear + UBL M503
2018-02-25 23:25:39 -06:00
