oliver
92a0dc552a
MK2_MULTIPLEXER does not require E2/E3 stepper pins
2017-11-24 23:56:39 +01:00
Scott Lahteine
b49acce035
Tweaks for lcd_external_control
2017-11-24 15:53:25 -06:00
Scott Lahteine
1ef1052ae1
Phatter arrows for Z offset overlay
2017-11-24 15:53:25 -06:00
Scott Lahteine
5926c9c97b
Followup for MESH_EDIT_GFX_OVERLAY
2017-11-24 15:53:25 -06:00
Scott Lahteine
ab03a31cc9
Patch G0/G1 for NANODLP_Z_SYNC
2017-11-24 14:11:12 -06:00
Scott Lahteine
a766dfb3b1
Merge pull request #8536 from thinkyhead/bf2_nanodlp_z_move_sync
...
[2.0.x] Implement NANODLP_Z_SYNC for 2.0.x
2017-11-24 13:11:14 -06:00
Scott Lahteine
01e207213f
Fix MK2_MULTIPLEXER stepper indirection
2017-11-24 12:49:28 -06:00
Roxy-3D
ec04cf27d3
Fix the G26 out of scope identifiers in the v2.0.0 branch ( #8543 )
...
These changes may need to be warmed over. I tried to fix things with
the least amount of disruption. I just wanted to get the bugfix_v2.0.0
branch working for people again.
2017-11-24 10:39:56 -06:00
Scott Lahteine
dc82babe8e
Implement NANODLP_Z_SYNC for 2.0.x
2017-11-24 00:28:06 -06:00
Scott Lahteine
c6b0c104bb
Adapt G26 to work for all meshes
2017-11-23 22:31:37 -06:00
Scott Lahteine
5ce7f23afa
Config option G26_MESH_VALIDATION for all meshes
2017-11-23 21:43:23 -06:00
Scott Lahteine
c19eb33408
Move G26 to gcode sub-folder
2017-11-23 21:43:23 -06:00
Scott Lahteine
a03f93bab4
Fix fan kickstart
2017-11-23 21:42:45 -06:00
Scott Lahteine
9e3c41f9e8
Tweak fan kickstart / speed code
2017-11-23 15:20:35 -06:00
GMagician
118ac61e59
[2.0.x] Tool change bad behaviour fix
...
Previous fix did not work as expected when axeis not homed. It raise Z but never return to original position
2017-11-22 20:24:03 -06:00
Scott Lahteine
c35d27f77c
Merge pull request #8299 from tcm0116/2.0.x-BIQU_BQ111-A4
...
[2.0.x] Add BIQU BQ111-A4 board
2017-11-22 19:16:04 -06:00
Scott Lahteine
1685cd193b
Tweak char_mode init
2017-11-22 19:12:08 -06:00
Scott Lahteine
9406c87a97
Fix up LCD init / charset
2017-11-22 18:22:55 -06:00
Thomas Moore
fa577392b2
Add BIQU BQ111-A4 board
2017-11-22 16:34:59 -06:00
Scott Lahteine
c2fc78c3a8
#ifndef => #if !PIN_EXISTS
2017-11-22 16:28:52 -06:00
Scott Lahteine
c613a1ed38
Fix indentation, stepper.h dependency, etc.
2017-11-22 14:55:30 -06:00
teemuatlut
f011a32771
Board definitions for Ultratronics Pro v1.0
2017-11-22 14:55:24 -06:00
Bob-the-Kuhn
9dad534f02
fixed
2017-11-21 21:37:20 -06:00
Scott Lahteine
4371345cbe
Don't re-init graphical LCD after boot screen
...
Followup to 13a3fb1acc
2017-11-21 18:23:39 -06:00
Scott Lahteine
56c02b7f59
Shift register buttons question
...
Can LCD shift registers keep up with faster MCUs?
2017-11-21 16:12:40 -06:00
Scott Lahteine
3994d3b935
General cosmetic LCD
2017-11-21 16:12:40 -06:00
Scott Lahteine
617993d0ea
Patch for !!TEST (was _BV once?)
2017-11-21 16:12:08 -06:00
Scott Lahteine
3269d8dd62
Tweak M42 var
2017-11-21 16:12:08 -06:00
Mateusz Krawczuk
bb1a6eea88
Remove pin count check for MIGTHYBOARD_REVE
...
Remove assert and unused code since it is implemented in pinsDebug_plus_70.h
2017-11-21 14:38:02 +01:00
Scott Lahteine
1ce0fb336b
Patch Max7219_LED_Set input args
2017-11-20 21:15:15 -06:00
GMagician
a61127a421
[2.0.x] tool change bad behaviours
...
This will solve 2 issues on tool change.
1) when no home is done ("no_move" is set) tool change should never move X & Y because... I don't know where I am...only Z should be adjusted to avoid bed collision if other nozzle is lower than current.
Since no move no bed level matrix should be applied
2) When SWITCHING_NOZZLE is enabled and system is homed there are two movements to go to destination, but first can move Z to older position and then crash on the bed
2017-11-20 16:34:55 -06:00
Vitaliy Sapyanov
e2724c68ab
Update pins_RURAMPS4D.h
...
Add and bugfix pins
2017-11-20 15:36:13 -06:00
Scott Lahteine
9770062309
Merge pull request #8463 from thinkyhead/bf2_32bit_M42
...
[2.0.x] Updates to Anet A8 configurations
2017-11-20 15:12:30 -06:00
Scott Lahteine
3066655727
Try port*100+pin, fix config dependency
2017-11-20 13:58:23 -06:00
Scott Lahteine
ba8bc7ea80
Cosmetic tweaks
2017-11-20 13:58:02 -06:00
Scott Lahteine
f409147116
Fix P2_04, P2_05
2017-11-20 13:58:02 -06:00
Bob-the-Kuhn
a28ccabe2a
M42 P1.20 fix
2017-11-20 13:58:02 -06:00
Unknown
33912fa7e8
Update Temperature::setPwmFrequency prototype to match source
...
Introduced with #8446
2017-11-20 01:50:41 -08:00
Scott Lahteine
b9327a4d16
Misc. general cleanup
2017-11-19 15:43:39 -06:00
Scott Lahteine
8836623e0f
Fix sq/min/max macros after platform headers
2017-11-19 15:43:39 -06:00
Scott Lahteine
fe4f009fdd
32-bit unless…
2017-11-19 15:43:38 -06:00
Scott Lahteine
25af9decfe
Remove enum.h include of MarlinConfig.h
2017-11-19 15:43:38 -06:00
Scott Lahteine
1d4571b88d
Dependency adjustments
2017-11-19 15:43:38 -06:00
Scott Lahteine
550f1025f0
Try using <Arduino.h> everywhere
2017-11-19 14:23:02 -06:00
Scott Lahteine
c0000a0cdc
Move servo code to modules/servo.*
2017-11-19 14:23:02 -06:00
Scott Lahteine
81bc428b48
Don't compile custom u8g without DOGLCD
2017-11-19 13:58:38 -06:00
Bob-the-Kuhn
c14000775b
PWM fixes, slow down fan update
...
include LPC1768 syntax for M42
couple more pin_t changes
consistency
change M42 to R, P format
Revert "change M42 to R, P format"
This reverts commit 01f12f579ec9ccc1bb9126e68d2c86449e9b7edf.
2017-11-18 07:05:50 -06:00
Scott Lahteine
60adc6ff02
Display filwidth ratio in terms of E mm
2017-11-18 07:01:49 -06:00
Scott Lahteine
6e533748eb
Fixes #8472
2017-11-18 05:15:55 -06:00
Scott Lahteine
485abb023b
Merge pull request #8456 from thinkyhead/bf2_wednesday_tweaks
...
[2.0] No retroactive adjustment with M851 Z
2017-11-18 04:49:53 -06:00
Scott Lahteine
3bba7d60f3
No retroactive changes with M851 Z
...
If using babystep to adjust the Z probe offset, the axis will move and the mesh will be updated at the same time, causing a doubling of the Z offset over the rest of the print.
To correct for this, the current Z position would need to be modified in the opposite direction, canceling out the additional Z offset added to the mesh. This would be confusing to users, and moreover it would not be accurate without also taking the current Z fade level and current Z height into account.
It might make sense to change the mesh in the case where no babystepping is taking place, but this could be considered an undesirable side-effect of changing the `zprobe_zoffset`.
One way to remedy this would be to return to storing the mesh with `zprobe_zoffset` included, then subtracting `zprobe_zoffset` from the returned Z value. Thus, a babystep moving the Z axis up 1mm would subtract 1 from `zprobe_zoffset` while adding 1 to all mesh Z values.
Without including the `zprobe_zoffset` in the `z_values` there is no safe way to alter the mesh in conjunction with babystepping, although it's fine without it.
2017-11-18 03:36:39 -06:00
Scott Lahteine
32512332df
Apply some formatting
2017-11-18 03:12:30 -06:00
Scott Lahteine
7dacc999b9
Remove obsolete show_bootscreen var
2017-11-17 17:01:43 -06:00
Roxy-3D
9729528d13
Update UBL's Delta Probable locations
...
This is a non-intuitive change. @oldmcg says in this post https://github.com/MarlinFirmware/Marlin/issues/7572#issuecomment-340641207 that using DELTA_PRINTABLE_RADIUS is better than DELTA_PROBABLE_RADIUS for setting the probe limits. This is because the automatic probe code checks all locations for being reachable by the probe prior to doing the probe.
2017-11-17 16:44:57 -06:00
Scott Lahteine
d48cb6bf41
Apply coding standards to Max7219
2017-11-17 15:32:21 -06:00
Scott Lahteine
bd8bcf06e7
Updates to Anet A8 configurations
...
Based on #8426
2017-11-16 23:19:36 -06:00
Bob-the-Kuhn
7eea000f4b
E0 auto fan fixes
2017-11-16 18:42:56 -06:00
Scott Lahteine
b2dda096fe
Fix FILAMENT_LCD_DISPLAY for disabled state
2017-11-16 16:57:48 -06:00
Scott Lahteine
1e8afb66b7
Fix a planner comment
2017-11-16 16:57:47 -06:00
Scott Lahteine
50f09cc029
Miscellaneous cleanup
2017-11-16 00:47:16 -06:00
Scott Lahteine
63257dc083
Fix M503 output for M145
...
Fixes #7978
2017-11-15 04:00:18 -06:00
Scott Lahteine
0918dae66e
Add OV() macro for use in thermistor tables
2017-11-15 03:15:18 -06:00
Scott Lahteine
24057270a3
Merge pull request #8420 from RowanMeara/rm-dithering-2.0.x
...
[2.0.x] Fix Software Fan PWM
2017-11-15 02:30:19 -06:00
Scott Lahteine
5079a02c90
Add HAL_SERVO_LIB to HAL_Due.h
2017-11-15 02:07:01 -06:00
Scott Lahteine
9c3761047e
Merge pull request #8434 from thinkyhead/bf2_fix_M32_subroutines
...
[2.0] Fix 'M32 P' subroutines
2017-11-15 01:15:02 -06:00
Scott Lahteine
e0d367f1fb
Fix M32 P subroutine handling
2017-11-15 00:44:21 -06:00
Scott Lahteine
9f8b4c5ee8
Patch SD lib files for readability
2017-11-15 00:44:21 -06:00
Scott Lahteine
2c8c30437e
Fix parser parameter value handling
2017-11-14 23:20:33 -06:00
RowanMeara
6131533157
Change dithering behavior to intended.
2017-11-14 00:47:07 -08:00
Scott Lahteine
e70b44dc0b
Make sure leveled[] is defined for later use
2017-11-14 02:13:38 -06:00
Scott Lahteine
54774841ba
Merge pull request #8416 from thinkyhead/bf2_M114_DETAIL
...
[2.0] Add M114_DETAIL to Configuration_adv.h
2017-11-14 00:28:55 -06:00
Scott Lahteine
009e3a7aa7
Add M114_DETAIL to Configuration_adv.h
2017-11-14 00:03:17 -06:00
Scott Lahteine
6d6c3b1e97
Fix up REPRAPWORLD_KEYPAD defines
2017-11-13 22:14:54 -06:00
Scott Lahteine
3f0a982b8c
Move Filament Width Sensor to Configuration_adv.h
2017-11-13 21:05:57 -06:00
Scott Lahteine
b76e173205
Move test extrusion options under G26
2017-11-13 21:05:57 -06:00
Scott Lahteine
14ebedca27
Drop unused LARGE_FLASH option
2017-11-13 15:44:24 -06:00
Scott Lahteine
b7feb53e8a
Support for Extrudrboard in Printrboard Rev.F
2017-11-13 15:44:23 -06:00
Scott Lahteine
91baca6abb
Patches for compiler warnings/errors
2017-11-13 04:43:47 -06:00
Scott Lahteine
2f73dec077
Apply native workspace fixes for G92, G53-59
2017-11-13 02:09:12 -06:00
Scott Lahteine
04abd8d459
Improve and clarify M428 code
2017-11-13 02:09:11 -06:00
Dave Johnson
c009a990e4
[2.0.x] Fix some 8-bit Teensyduino compile warnings ( #8385 )
...
* Fix some 8-bit Teensyduino compile warnings
-Override Teensyduino legacy NOT_A_PIN 127 define
-some fixups for Printrboard_RevF pins
* Proper cleanup of Printrboard Rev.F pins
* Apply LCD fixes to Printrboard v1
2017-11-13 01:07:59 -06:00
Scott Lahteine
e8e92f8969
No leveling data in M114 if no leveling is enabled
2017-11-12 23:03:38 -06:00
Scott Lahteine
f5d210c35c
Fix report_current_position
2017-11-12 23:02:53 -06:00
Roxy-3D
faaae7a1b2
Provide more clearance for BL-Touch probe
2017-11-12 13:11:22 -06:00
Scott Lahteine
06ee6584fd
Remove offsets from soft endstops, tool change
2017-11-11 22:47:38 -06:00
Scott Lahteine
c938273bd5
Coding standard patch of M290
2017-11-11 22:14:21 -06:00
Scott Lahteine
98c1265e3b
Disable laser power when PWM goes to 0
2017-11-11 22:00:22 -06:00
Scott Lahteine
d4a1154c25
Use do_blocking_move_to where possible
2017-11-10 20:55:23 -06:00
Scott Lahteine
36426af564
Merge pull request #8356 from tcm0116/2.0.x-M600
...
[2.0.x] Normalize load/unload length in M600
2017-11-10 19:44:08 -06:00
Scott Lahteine
1ed86adf9c
Cleanup around updatePID
2017-11-10 19:27:34 -06:00
Scott Lahteine
75a58ee4b8
Fix position_is_reachable bug in waiting
2017-11-10 19:27:33 -06:00
LVD-AC
e334efb2a7
PROBE_MANUALLY etc.
2017-11-10 19:27:33 -06:00
Bob-the-Kuhn
b6415dc169
finish
2017-11-10 14:39:55 -06:00
Scott Lahteine
0efa66be0b
Updates to Traditional Chinese
...
From @cheton at #8347
2017-11-10 04:52:20 -06:00
Scott Lahteine
cba9c1cf9e
Add pre-calculated planner.e_factor
2017-11-10 03:14:24 -06:00
Thomas Moore
600c85226e
Normalize load/unload length in M600
2017-11-10 02:31:46 -06:00
Scott Lahteine
81b91b3f9d
Clean up some trailing white-space
2017-11-10 02:31:04 -06:00
Roxy-3D
2f9848ede3
Correct gMax 1.5+ example file
...
And... Keep both branches in synchronization.
2017-11-09 23:44:14 -06:00
Scott Lahteine
006dad4b52
Add pins_RURAMPS4D.h & change pins.h
...
http://3dtoday.ru/blogs/svs0724/ruramps4d-ramps-for-adruino-due-the-pilot-shipment-available-for-zack/
2017-11-09 21:51:06 -06:00
Scott Lahteine
00514857e9
SBASE serial port -1, RAMPS spacing
2017-11-09 21:41:07 -06:00
