Scott Lahteine
f536c4dccb
Move configs
2017-09-06 06:28:30 -05:00
Scott Lahteine
e4fcf460e7
Marlin bugfix-2.0.x Version/README
2017-08-31 17:56:08 -05:00
Michal Holes
54d48130f3
Slovak UTF-8 translation
...
Slovak UTF-8 translation
2017-08-23 19:14:35 -05:00
Vben
4817b39d98
Added new feature for AutoParking Extruder (APE)
2017-08-16 17:33:11 -05:00
Scott Lahteine
385f1bb9e5
Merge pull request #7504 from thinkyhead/bf1_servo_delays
...
Individual servo delays
2017-08-16 16:05:22 -05:00
Scott Lahteine
a1878cd1c0
Add "Level Corners" menu option
2017-08-16 02:54:33 -05:00
GMagician
e9c72978c7
Implement SERVO_DELAY as array
...
This modify give SERVO_DELAY x servo basis
2017-08-15 00:28:47 -05:00
Jozsef Kiraly
97c21e9007
Support for Geeetech GT2560 Rev.A/Rev.A+
2017-08-06 00:42:54 -05:00
Scott Lahteine
804818b4d9
Bring configs up to date
2017-08-05 03:48:52 -05:00
teemuatlut
936d00dda8
Implement probing delay for piezo sensors
2017-07-29 21:46:40 -05:00
Scott Lahteine
51864fd365
Add bed size as a configuration option
2017-07-26 23:04:54 -05:00
C. Scott Ananian
890e7a16a9
Add support for Printrbot Neopixel RGBW strip.
...
Connected as described at http://printrbot.com/shop/led-strip/
Based on patch by Kelly Anderson <kelly@xilka.com> at
http://www.xilka.com/printrbot/marlin/1.1.4/20170707/
2017-07-22 16:07:55 -05:00
Scott Lahteine
fc9ce65095
Add BUSY_WHILE_HEATING
for hosts that need it
2017-07-06 16:28:57 -05:00
Petr Zahradník
8c34233452
UTF-8 mapper for Czech
2017-07-04 15:51:23 -05:00
Scott Lahteine
69297b2d7b
Make all EEPROM optimization options available
2017-07-02 20:47:03 -05:00
Scott Lahteine
232a10410d
LCD_FOR_MELZI
2017-07-01 22:32:20 -05:00
Scott Lahteine
dcec7178d1
Expose DISABLE_M503 option as a test option
2017-07-01 21:31:28 -05:00
Scott Lahteine
5b03f23fa2
Bring configurations up to date, fix some comments
2017-06-28 16:41:49 -05:00
Scott Lahteine
5b11b33854
Add support for Průša MK2 Multiplexer
2017-06-27 04:55:30 -05:00
Scott Lahteine
afbc6e3e2f
Update DELTA/SCARA config comments
2017-06-24 12:47:17 -05:00
Bob-the-Kuhn
325f09ea6c
Add link to custom LiquidCrystal library by F. Malpartida
2017-06-22 13:07:08 -05:00
Scott Lahteine
907cafcbfd
Support for two switching extruders
2017-06-19 17:20:59 -05:00
dot-bob
0bc66bf22c
PCA9632 PWM color LED support
...
Add support for the PCA9632 PWM color LED driver used on the Ultimaker 2 and Wanhao Duplicator 6.
2017-06-12 01:09:24 -05:00
Bob-the-Kuhn
1c107b3949
delete problem line
2017-06-09 11:53:36 -05:00
Scott Lahteine
e556ab1dff
Find three-point leveling points on Delta
2017-06-07 16:07:38 -05:00
Scott Lahteine
1919cb0d1e
Config cleanups
2017-06-01 19:26:16 -05:00
Roxy-3D
364f8fb613
Update Configuration.h files to better names ( #6814 )
...
Changed UBL_G26_MESH_EDITING to UBL_G26_MESH_VALIDATION
Added UBL_MESH_EDIT_MOVES_Z to prepare for that change (coming next)
2017-05-21 11:10:22 -05:00
Scott Lahteine
99c4900a98
SPINDLE/LASER config changes
2017-05-17 04:23:06 -05:00
fixoid
c2321b1cdd
Separate SWITCHING_NOZZLE and SWITCHING_EXTRUDER
2017-05-16 19:25:17 -05:00
Scott Lahteine
1c4ed8b106
Note 5 extruders in config comments
2017-05-07 21:28:54 -05:00
Brian
faa270071d
Improve BLTOUCH_HEATERS_OFF functionality
...
- rename to PROBING_HEATERS_OFF
- move heater pausing functionality into thermalManager
- add variables, pause(), ispaused(), other functions
- add fan pausing functionality -> PROBING_FANS_OFF
- add probing_pause() wrapper
- move pausing into do_homing_move() and do_probe_move() to minimize quiet time and so other probe types can benefit
- example configs
2017-05-07 16:22:08 -04:00
Scott Lahteine
77769e284f
Edit configuration comments
2017-05-05 13:32:31 -05:00
Scott Lahteine
da08e11acd
Add EXTRAPOLATE_BEYOND_GRID option to bilinear leveling
2017-05-04 00:19:07 -05:00
Scott Lahteine
54751e8557
Put DISTINCT_E_FACTORS adjacent to the affected settings
2017-04-30 15:30:31 -05:00
Scott Lahteine
0dbe4b3e54
Edit configurations to reduce verbosity, arrange logically
2017-04-30 15:30:31 -05:00
Scott Lahteine
d7d4378481
Remove inaccurate version description
2017-04-30 14:57:19 -05:00
Scott Lahteine
7db805930a
Cleanup configurations
2017-04-28 18:32:39 -05:00
Roxy-3D
4075b95519
Allow BL-Touch users to control heaters during probe event ( #6485 )
...
The Configuration.h file entries for BL-Touch have been updated to:
```cpp
//#define BLTOUCH
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are
turned off during probe event
```
2017-04-28 09:19:55 -05:00
Scott Lahteine
959566cf0a
Update note about M163 / M164
2017-04-22 16:23:15 -05:00
Scott Lahteine
0e97b3d6d0
Fix some configuration spacing
2017-04-14 22:36:10 -05:00
Scott Lahteine
1bd25fd2b3
Clean up config spacing, section headings, etc.
2017-04-14 19:06:31 -05:00
Scott Lahteine
fd2a0784ba
Add support for SOLENOID_PROBE
2017-04-14 17:24:36 -05:00
Scott Lahteine
dac21ec680
Add support for an RGBW LED
2017-04-11 12:58:55 -05:00
Scott Lahteine
e7746ffee4
Extend RGB LED support, adding Printer Events
2017-04-11 12:15:41 -05:00
Scott Lahteine
9343f6a95f
Put TOSHIBA with other stepper driver options
2017-04-09 20:52:49 -05:00
Scott Lahteine
1855534f20
Config files cleanup
2017-04-09 06:44:52 -05:00
Scott Lahteine
c26a315d0b
Additional missed patches
2017-04-09 04:24:23 -05:00
Scott Lahteine
c54f6cf23d
Updates to support 5 extruders
2017-04-09 03:49:16 -05:00
Scott Lahteine
824f3c1c0d
Fix up configuration comments
2017-04-08 18:59:56 -05:00
Scott Lahteine
995ed90248
Clean up Filament Width Sensor comments
2017-04-08 18:59:56 -05:00
Scott Lahteine
2a84122edd
Configuration changes to support 5 extruders
2017-04-07 10:46:35 -05:00
Bob-the-Kuhn
3b8926bd09
improved wording, consolidation of info, BLTouch warning
...
==============================================
clarified BLTouch calculation & changed comment delimitters/flags
I found it hard to pickout the various sections in this area so I
changed most comments from // style to /** ... */
Made the BLTouch calculation simpler and clarified the units of measure
for the result.
============================================
add changes to example configurations
============================================
add TinyBoy2 to this PR & add BLTouch Delay
2017-04-06 16:06:01 -05:00
Scott Lahteine
d13991ae18
Use same config name for all mesh dimensions
2017-04-06 16:05:59 -05:00
Scott Lahteine
c56eec29f0
Configurable delay for BLTouch servo emulation
2017-04-02 11:14:53 -05:00
Scott Lahteine
9e22184936
Add a "manual" option for ABL
2017-03-31 11:50:18 -05:00
Scott Lahteine
81136c1e82
Merge pull request #6177 from thinkyhead/rc_tinyboy
...
Support for TinyBoy 2 3D printer (and its OLED display)
2017-03-31 04:31:47 -05:00
Stefan Brüns
0fe57ad4f5
Add Support TinyBoy2 OLED/Encoder panel
...
The OLED is driven by an SSD1306, connected to the board via
I2C, the rotary encoder is connected to 3 GPIO pins.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-31 04:05:34 -05:00
Scott Lahteine
edbc024d76
Disable UBL_G26_MESH_EDITING by default
2017-03-31 02:20:20 -05:00
Scott Lahteine
5a2abeca78
Merge pull request #6100 from thinkyhead/rc_soft_pwm_dither
...
Enhancement of PWM, with dithering
2017-03-24 04:57:40 -05:00
Stefan Brüns
35a55d5757
SOFT_PWM: Implement dithering if SOFT_PWM_SCALE is 1 or more
...
If dithering is enabled, the remainder of the soft_pwm_X duty value at
turnoff time is added to the next cycle. If e.g. the duty is set to 9 and
SCALE is set to 2, the PWM will be active for 8 counts for 3 cycles and
12 counts on each fourth cycle, i.e. the average is 9 cycles.
This compensates the resolution loss at higher scales and allows running
fans with SOFT_PWM with significantly reduced noise.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-24 04:13:36 -05:00
Scott Lahteine
783338a0b8
Add UBL_MESH_EDIT_ENABLED to configs
2017-03-24 00:44:55 -05:00
Scott Lahteine
e244399766
Additional cleanup of UBL code
2017-03-22 20:51:10 -05:00
Scott Lahteine
2512871a36
Patch configs UBL followup
2017-03-18 12:32:03 -05:00
Scott Lahteine
27b5666e15
Move Allen Key probe definition to the top
2017-03-18 12:27:37 -05:00
Scott Lahteine
cf94688925
Univeral Bed Leveling - configuration
2017-03-18 11:35:19 -05:00
Scott Lahteine
0e410c9dfd
Software endstop options as simple switches
2017-03-17 06:05:17 -05:00
Scott Lahteine
3e927ff204
Replace MBL Z hacking
2017-03-17 06:05:17 -05:00
Marek Pikuła
6836b94eea
Added circle pattern for nozzle cleaning feature
2017-03-06 03:03:00 -06:00
Colin Gilgenbach
48b7e0f8d8
Nozzle Wipe Vertical Zig-Zag
...
- Add configuration support for zigzags in either the X or Y axis, for
wipe pads significantly longer in one dimension.
- Add configuration for default number of zig-zag triangles, vs. a
magic number in `Marlin_main.cpp`.
- Update description of auto nozzle wiping to match functionality
2017-02-25 21:52:43 -06:00
Scott Lahteine
e282b72151
Remove non-applicable comment on MANUAL_Z_HOME_POS
2017-02-18 05:14:43 -06:00
esenapaj
d38e335272
From "microseconds" to "milliseconds"
...
delay() is milliseconds
2017-01-02 01:19:33 +09:00
Scott Lahteine
5ab7b91615
Comment on filament runout sensor config
2016-12-23 19:50:27 -08:00
Scott Lahteine
78d6d6e076
Merge pull request #5452 from thinkyhead/rc_save_your_mesh
...
Save Bed Leveling to EEPROM
2016-12-15 20:23:01 -08:00
Scott Lahteine
1b2fb2bdc7
ABL_GRID_POINTS_* => ABL_GRID_MAX_POINTS_*
2016-12-15 19:08:41 -08:00
esenapaj
069c6b38dd
Remove unnecessary tabs and spaces
2016-12-16 00:21:32 +09:00
Scott Lahteine
da6a094424
Sanity-check inverting and pullups for Z probe and Z endstop
...
`Z_MIN_ENDSTOP_INVERTING` must match `Z_MIN_PROBE_ENDSTOP_INVERTING`
when using `Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN`.
This is easy to overlook.
2016-12-08 00:12:19 -08:00
Scott Lahteine
aa241c63b3
Include M205 note in configurations
2016-12-07 14:45:44 -06:00
akaJes
d7b948610a
Experimental bilinear subdivision option
2016-12-05 20:11:24 -06:00
Scott Lahteine
3391c785c6
Support for distinct E factors
2016-12-05 07:26:18 -06:00
Scott Lahteine
415294801f
Merge pull request #5330 from thinkyhead/rc_rgb_led
...
Support for an RGB LED using 3 pins
2016-11-30 14:14:00 -06:00
Scott Lahteine
65c50e062e
Support for an RGB LED using 3 pins
2016-11-30 00:02:31 -06:00
jes
f674246397
extend Configurations files
2016-11-29 15:04:36 +02:00
Scott Lahteine
092e949b58
Merge pull request #5169 from thinkyhead/rc_core_inverted
...
Support for COREYX, COREZX, COREZY
2016-11-28 02:26:41 -06:00
Scott Lahteine
f6f77d34a1
Add a fade factor for mesh leveling
2016-11-26 03:41:26 -06:00
Scott Lahteine
eb714ee873
Move dummy thermistor opts, fix redundant sensor comment
2016-11-18 22:24:48 -06:00
Scott Lahteine
7a99c6ce4f
Reformat temp sensor listing
2016-11-18 22:24:47 -06:00
Scott Lahteine
eb120e518c
Followup to new endstop interrupts feature
...
- Fix typos, verbiage
- Fix naming of `setup_endstop_interrupts`
- Some formatting, indentation, spacing
2016-11-18 21:53:45 -06:00
Scott Lahteine
832fe284b4
Merge pull request #5184 from AnHardt/endstop_interrupts
...
Introduce endstop interrupts
2016-11-18 20:50:24 -06:00
Scott Lahteine
2330619da0
Merge pull request #5191 from petrzjunior/const
...
Replace const bool with #define for consistency
2016-11-17 03:37:32 -06:00
Petr Zahradník junior
d7ce5d271b
Replace const bool with #define for consistency
2016-11-16 18:55:21 +01:00
AnHardt
f3eee02596
Introduce endstop interrupts
...
If ENDSTOP_INTERRUPTS_FEATURE is enabled this tries to set up interrupt routines
for all used endstop pins. If this worked without errors, `endstops.update()` is called
only if one of the endstops changed its state.
The new interrupt routines do not really check the endstops and react upon them. All what they
do, is to set a flag if it makes sense to call the endstop test we are used to.
This can be used on:
* ARM (DUE) based boards - all pins can raise interrupts,
* RAMPS - all 6 endstop pins plus some other on EXT-2 can raise interrupts,
* RAMPS based boards - as long the designers did not change the pins for the endstops or at least left enough,
* all boards, if there are enough pins that can raise interrupts, and you are willing/able to swap with pins dedicated to other purpose.
2016-11-15 12:07:41 +01:00
esenapaj
2ae72b0491
Follow up the PR #5167 (Add Turkish Language) again, etc
...
・Update forgotten K8400\Dual-head\Configuration.h
・Adjust spacing
2016-11-09 06:31:21 +09:00
Scott Lahteine
e3c8318504
Add reversed CORE options
2016-11-05 23:47:46 -05:00
Rigid3D
2327764980
Add Turkish Language
2016-11-05 21:06:16 -05:00
Scott Lahteine
0908329d96
Merge pull request #5057 from thinkyhead/rc_mbl_lcd_logical
...
Fix manual leveling coordinates
2016-10-22 06:31:02 -05:00
Scott Lahteine
14e60f0d3b
Correct typo in configs
...
As pointed out by #5044
2016-10-22 05:56:32 -05:00
Scott Lahteine
4f6bfabaad
Patch BAUDRATE line in configs
2016-10-22 00:48:52 -05:00
Scott Lahteine
1e551c0688
Revert "Squashed - Removal of PID functional range"
2016-10-09 16:27:45 -05:00
Rerouter
5f5d87cad3
Update Configuration.h
2016-10-02 07:01:40 -05:00
Scott Lahteine
d19cfcfc1d
max_jerk array, DEFAULT_XYJERK => DEFAULT_[XY]JERK
2016-10-02 06:34:56 -05:00