dfb38874f8
Some suggested changes for #1555
2015-03-03 00:48:20 -08:00
715104e477
Fix Endstop check for CoreXY bots.
...
The X_Axis could not home to min while Y_Max endstop was trigged.
2015-03-02 13:36:58 -03:00
266ff227cf
Merge pull request #1510 from docdawning/Development
...
Trivial spelling correction
2015-02-17 20:59:32 +01:00
dfd4e74a5c
Trivial spelling correction
2015-02-17 12:37:05 -07:00
afc737ca0c
Fix CoreXY Homing Routine.
...
Fixed how stepper ISR figure it out when the head (extruder) is going to
Min or Max direction.
Added Homing to Max Endstops.
2015-02-13 14:38:05 -02:00
986e723eeb
Add 4th extruder
2015-01-24 13:37:58 +01:00
9040446780
Merge pull request #1395 from AnHardt/iss1394
...
removed function step_wait() from stepper.cpp
2015-01-23 06:58:10 -08:00
15a00a5a7c
Add 1µs delay in other appropriate spots
2015-01-23 03:24:45 -08:00
23cb899c5a
removed function step_wait() from stepper.cpp
...
removed function step_wait() from stepper.cpp because its used nowhere.
2015-01-21 16:30:45 +01:00
d9d4a78e0f
Add proper delay in stepper.cpp
...
Issue #1385 describes a delay that the compiler is optimizing out and
this solution.
2015-01-21 01:51:29 -08:00
edfcf3b527
Toshiba Stepper Driver support
...
Tosh stepper drivers need to be driven slower, so the stepper code
was interleaved to separate the pin HIGH from the pin LOW. This adds
enough instructions to make it work, without needing nops.
2014-12-03 15:01:52 +01:00
f989bd5435
Simple code cleanup. Rename "homeing" to homing.
2014-10-05 13:20:53 -07:00
2acd3792fc
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2014-05-01 12:03:47 +02:00
8b4c4aa5c3
Add feature to check&retry CRC read errors on SD.
2014-05-01 12:03:41 +02:00
97ead2eccb
Fix for microstepping pin mapping, not using Teensy pin mapping, but Arduino's default pin mapping so Arduino library can be used
2014-04-25 12:57:11 +08:00
d85411f13a
Revert "Fix for stepper microstepping"
...
This reverts commit eea3ba5588
2014-04-25 12:41:56 +08:00
7c7f2d094e
Revert "Fix for reading microstepping resolution"
...
This reverts commit 2715f6ddbf
2014-04-25 12:41:48 +08:00
2715f6ddbf
Fix for reading microstepping resolution
2014-04-24 17:48:33 +08:00
eea3ba5588
Fix for stepper microstepping
2014-04-24 12:56:06 +08:00
380144c20f
Add Ultiboard2 electronics. With PWM current settings. For the few people that have this new board as experiment in their UM-Original.
2014-01-06 11:05:02 +01:00
457d8a0acb
Fixed merge conflicts
2013-10-20 09:50:27 +02:00
b832f5b9f6
added delta tower babystepping. Its untested, but hopefully florian horsch will be able to try.
...
also, removed some trouble for compilation with corexy.
I think that babystepping is only possible in z for a delta tower.
not sure if it would be usefull to step individual motors on a delta, i don't own one
2013-10-07 09:14:04 +02:00
d147a057ac
Add the socalled "Babystepping" feature.
...
It is a realtime control over the head position via the LCD menu system that works _while_ printing.
Using it, one can e.g. tune the z-position in realtime, while printing the first layer.
Also, lost steps can be manually added/removed, but thats not the prime feature.
Stuff is placed into the Tune->Babystep *
It is not possible to have realtime control via gcode sending due to the buffering, so I did not include a gcode yet. However, it could be added, but it movements will not be realtime then.
Historically, a very similar thing was implemented for the "Kaamermaker" project, while Joris was babysitting his offspring, hence the name.
say goodby to fuddling around with the z-axis.
2013-10-06 21:14:51 +02:00
253dfc4bc1
Bed Auto Leveling feature
...
Check the Readme for instruction how to enable and configure the feature
2013-09-29 13:20:06 -03:00
ed1ab42186
Added Y_DUAL_STEPPER_DRIVERS
...
Enables two stepper drivers to be used for the Y axis (useful for
Shapeoko style machines)
Each Y driver can be stepped in either the same way or in opposite
directions, accounting for different hardware setups (leadscrew vs. belt
driven)
2013-09-17 19:19:20 +01:00
f4a59e4ce5
Revert "Added Y_DUAL_STEPPER_DRIVERS"
...
This reverts commit 7ee275b620
2013-09-17 19:05:49 +01:00
7ee275b620
Added Y_DUAL_STEPPER_DRIVERS
...
Enables two stepper drivers to be used for the Y axis (useful for
Shapeoko style machines)
Each Y driver can be stepped either the same way or in opposite
directions, accounting for different hardware setups (leadscrew vs. belt
driven)
2013-09-17 19:02:00 +01:00
9547fb9dfb
Add duplication and auto-park mode for dual x-carriage support.
2013-08-08 00:10:26 +10:00
2ca983568d
separate INVERTING for MIN and MAX endstops (6 #defines instead of 3)
2013-08-01 15:06:39 +02:00
d7390e13d9
Support dual x-carriage printers
...
Dual x-carriage designs offer some substantial improvements for dual
extruder printing.
2013-07-17 22:44:45 +10:00
bd96d22bfb
Merge branch 'Marlin_v1' into thinkyhead
...
Conflicts:
Marlin/Configuration.h
Marlin/Configuration_adv.h
Marlin/Marlin.h
Marlin/Marlin_main.cpp
Marlin/Servo.cpp
Marlin/language.h
Marlin/pins.h
Marlin/planner.cpp
Marlin/ultralcd_implementation_hitachi_HD44780.h
README.md
2013-06-09 22:26:47 +02:00
ff6fa09ecf
Moved corexy implementation from stepper to planner
...
(Thanks iquizzle)
2013-06-09 13:10:06 +02:00
5dabc95409
Apply all changes from latest Marlin_V1
...
Diffed and merged, preserving my updates
2013-06-06 15:49:25 -07:00
40eb07bad4
Revert and extend previous change pin check change
...
Reviert previous change of #if BLAH_PIN > 0 to #if defined(BLAH_PIN) &&
BLAH_PIN > -1. Unfortunately some times pin 0 is used. For my sins I've
gone through and replaced all unsafe checks of #if BLAH_PIN > -1 with
the safe version.
2013-05-22 21:33:23 +10:00
a200521eab
Added CUSTOM_MENDEL_NAME option to Configuration.h and language.h
...
Also cosmetic comment changes and spelling corrections in printed
messages
2013-05-02 09:22:58 -07:00
289c02eda4
Remove unnecessary pin initialization in stepper.cpp
...
(duplicates initialization in Marlin_main.cpp)
2013-04-30 01:11:23 +10:00
92782f9252
Merge pull request #1 from illuminarti/Fix_E_Speed
...
Fix step rate bug (especially for retraction)
2013-03-15 09:07:34 +01:00
921273baa0
Added optional feature to stop printing when an endstop is hit. Made the Z display on the LCD in 3.2 format instead of 3.1. Added LCD message when and endstop is hit.
2013-01-08 11:53:18 +01:00
9b160972a1
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2012-12-09 23:46:42 +01:00
e036750bdf
Use the disable macros on initialization. Which fixes a bug when there is no pin defined for stepper enabled (motherboard 4)
2012-12-09 23:46:25 +01:00
6cba11f087
Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.
2012-12-09 01:32:09 -08:00
4e26ecc940
The Partial release message (which does not really tell you anything) overwrites the final print time on the LCD, which is a real shame. So I removed the message.
2012-12-05 19:32:26 +01:00
6a9bee27cc
Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.
2012-12-03 12:52:00 +01:00
94ea26ff46
Some minor changes on code style. And a bugfix where the counters for positioning in the stepper where wrong depending on compiler settings. (Caused strange values to reported back with M114 and endstop triggers). Also fixed compiling with FWRETRACT enabled.
2012-12-03 12:13:20 +01:00
97fa2a9c30
Few simple fixes that save RAM, as static strings are stored in RAM by default.
2012-11-28 10:30:34 +01:00
dbbf050005
More rambo fixes
2012-11-21 20:53:56 +01:00
f934d0ef5b
Merge remote-tracking branch 'tonokip/Marlin_v1' into Marlin_v1
...
Conflicts:
Marlin/Configuration.h
2012-11-21 20:36:30 +01:00
72586eb30a
Solved few warnings.
2012-11-12 09:29:12 +01:00
1c1fddc7ac
Added support for the Rambo reprap electronics board. Added Mcodes to set
...
motor current and microstepping pins.
2012-08-30 00:16:57 -07:00
de0448343f
added KILL_PIN support / cleaned up manage_inactivity function definition
2012-08-21 14:48:29 +02:00
