bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
7,158 Commits 1 Branch 4 Tags 151 MiB
af2ea23e9c
Commit Graph

5913 Commits

Author SHA1 Message Date
Scott Lahteine
97b6fb6381 Reduce / optimize LIN_ADVANCE code 2017-02-14 07:52:03 -06:00
Sebastianv650
271ced7341 Prevent re-entering of temperature ISR 
If Marlin is inside the temperature ISR, the stepper ISR is enabled. If
a stepper event is now happening Marlin will proceed with the stepper
ISR. Now, at the end of the stepper ISR, the temperatre ISR gets enabled
again. While Marlin proceed the rest of the temperature ISR, it's now
vulnerable to a second ISR call.
 2017-02-14 07:52:03 -06:00
Sebastianv650
1b59766fcb Cleanup position_float 
Hopefully fixes Marlin #5481
 2017-02-12 13:09:06 +01:00
Scott Lahteine
a950c31e2d Merge pull request #5815 from thinkyhead/rc_pulses_per_step 
Give encoder pulse/steps conditionals their own block
 2017-02-12 04:14:00 -06:00
Scott Lahteine
7176de8605 Merge pull request #5814 from thinkyhead/hotend_loop_always 
Make HOTEND_LOOP more consistent, let compiler optimize it
 2017-02-12 04:13:14 -06:00
Scott Lahteine
adec219ca5 Merge pull request #5811 from thinkyhead/fix_two_strings 
No space after X: or A: in M114 output
 2017-02-12 04:11:51 -06:00
jes
eaa829b58c Reduce memory use by ABL_BILINEAR_SUBDIVISION slightly 2017-02-12 04:09:48 -06:00
Scott Lahteine
1c99ca82d8 Give encoder pulse/steps conditionals their own block 2017-02-12 03:57:57 -06:00
Scott Lahteine
e44294bb4d Make HOTEND_LOOP more consistent, let compiler optimize it 2017-02-12 02:50:38 -06:00
Scott Lahteine
701f4a6d9d Merge pull request #5729 from Bob-the-Kuhn/guaranteed-BLTouch-detection 
guaranteed BLTouch detection
 2017-02-12 01:13:35 -06:00
Scott Lahteine
c15b9a6a06 No space after X: or A: in M114 output 2017-02-12 00:10:03 -06:00
Scott Lahteine
e1702816f6 Fix SD_CHECK_AND_RETRY condition 
Addressing #5806
 2017-02-11 23:55:56 -06:00
Scott Lahteine
1bc5be3bdf Cast DELTA_PRINTABLE_RADIUS to float in sq() 
Addressing #5625
 2017-02-11 23:28:39 -06:00
Bob-the-Kuhn
0369f97ec1 guaranteed BLTouch detection 
To guarantee that the 5mS pulse from a BLTouch is recognized you need to
have the endstops.update() routine run twice in that 5mS period.

At 200 steps per mm, my system has problems  below a feedrate of 120 mm
per minute.

Two things were done to guarantee the two updates within 5mS:
1) In interrupt mode, a check was added to the temperature ISR.  If the
endstop interrupt flag/counter is active then it'll kick off the endstop
update routine every 1mS until the flag/counter is zero.  This
flag/counter is decremented by the temperature ISR AND by the stepper
ISR.

2) In poling mode, code was added to the stepper ISR that will make sure
the ISR runs about every 1.5mS.  The "extra" ISR runs only check the
endstops.  This was done by grabbing the intended ISR delay and, if it's
over 2.0mS, splitting the intended delay into multiple smaller delays.
The first delay can be up to 2.0mS, the next ones 1.5mS (as needed) and
the last no less than 0.5mS.

=========================================

BLTouch error state recovery

If BLTouch already active when deploying the probe then try to reset it
& clear the probe.

If that doesn't fix it then declare an error.

Also added BLTouch init routine to startup section
 2017-02-11 12:01:34 -06:00
Scott Lahteine
1e4d4e5915 Fix typo in language_uk 
Thanks to @pavlus for this one
 2017-02-10 15:34:31 -06:00
Scott Lahteine
7fe7a0c8be Merge pull request #5793 from thinkyhead/rc_adjust_probe_output 
Adjust probe_pt() terminal output to respect probe z-offset
 2017-02-09 23:05:02 -06:00
Scott Lahteine
633c253bc1 Merge pull request #5792 from thinkyhead/rc_default_dac_vals 
Default DAC values for RigidBoard V2
 2017-02-09 22:56:03 -06:00
Florian Heilmann
7bbc31704c Adjust probe_pt() terminal output to respect probe z-offset 2017-02-09 22:54:22 -06:00
Scott Lahteine
a245656db3 Merge pull request #5713 from gege2b/RCBF-French 
French translation : Added missing strings as well as missing accents
 2017-02-09 22:43:56 -06:00
jaysonkelly
713931338a Default DAC values for RigidBoard V2 2017-02-09 22:39:00 -06:00
Bob-the-Kuhn
ae706233a8 pinsDebug for 644/1284 & USB646/1286 families 
added conditional compilation for PWMs 1C & 3C

add Teensyduino compatibility

==========================================

changes per review - minor formatting changes

1) remove non-printable character at the end of line 687

2) split a really long comment into two lines

3) got rid of some trailing spaces

============================================

Made pinsDebug_Teensyduino.h the same between this PR and PR 5668 which
is for a re-written pinsDebug.h file.

The changes were:
1) added copyright @ GNU license header
2) a blank line crept in.
 2017-02-09 07:24:02 -06:00
Gege2B
22dfcc9a71 French translation : Added missing strings as well as missing accents 2017-01-17 23:29:23 +01:00
Scott Lahteine
9b5515926a Merge pull request #5696 from thinkyhead/rc_volumetric_default 
Allow enabling volumetric filament on config load
 2017-01-14 05:48:51 -08:00
Robert Kirk
0d147ead66 Allow enabling volumetric filament on config load 2017-01-14 04:37:49 -08:00
AnHardt
fa26767efe Replace all remaining 'boolean' with 'bool' 2017-01-13 13:03:52 +01:00
AnHardt
f6858d9974 Fix M110 without leading N 
Store N in the right variable.
This is too rarely used.

"mea culpa, mea culpa, mea maxima culpa"
 2017-01-13 12:33:50 +01:00
Scott Lahteine
0c0c840ba8 Merge pull request #5683 from emartinez167/EMartinez-Changes 
Updates to some incorrectly ended strings in the Spanish translation
 2017-01-12 07:49:15 -08:00
Kai
25dae3bccc Update language_de.h 
Small corrections
 2017-01-12 16:06:58 +01:00
emartinez167
7292145f4e Fix for some wrong strings 
On last commit, some strings were ended with the incorrect character.
This fixes it.
 2017-01-12 22:35:04 +08:00
Scott Lahteine
93a9aa6b76 Merge pull request #5682 from thinkyhead/rc_spanish_jan 
Updates to Spanish language
 2017-01-12 06:14:10 -08:00
Scott Lahteine
7a9c1a279b Merge pull request #5681 from thinkyhead/rc_prevent_boot_loop 
Reset watchdog in SD init to prevent reboot
 2017-01-12 06:13:56 -08:00
Scott Lahteine
e409c7f9e8 Merge pull request #5645 from esenapaj/From-microseconds-to-milliseconds 
From "microseconds" to "milliseconds"
 2017-01-12 06:02:55 -08:00
emartinez167
020c6af7b0 Updates to Spanish language 
Add missing Spanish language definitions.
 2017-01-12 05:53:39 -08:00
Hans Raaf
d29cc8f7bc Reset watchdog in SD init to prevent reboot 
If the watchdog is enabled and bootscreen + SD card checks take too long, Marlin may hang at boot time because of the reset loop. We have this happen all the time with the Anet board if no SD card is inserted.
 2017-01-12 05:33:38 -08:00
Scott Lahteine
7743849608 Merge pull request #5680 from thinkyhead/rc_configs_puhlease 
code_value_float tweak
 2017-01-12 05:22:47 -08:00
Scott Lahteine
16357fbfdf Merge pull request #5619 from Ocarthon/RCBugFix 
Disable SD Detect for K8400
 2017-01-12 05:22:03 -08:00
Scott Lahteine
e57c0fce66 Move MOSFET changes above #include for RIGIDBOARD 
Correction to #5629
 2017-01-12 04:46:49 -08:00
Scott Lahteine
c376f6a2cb code_value_float tweak 2017-01-12 04:38:09 -08:00
Scott Lahteine
fb3c30e24c Fix lcd_wait_for_homing causing menu to block 
As a showcase function for how to do waiting in the lcd menu, this function should be preserved.
 2017-01-12 04:37:23 -08:00
Scott Lahteine
f8ae0fd29f Merge pull request #5647 from manianac/RCBugFix-PrepareMenuFix 
Fix empty Prepare menu
 2017-01-12 04:20:18 -08:00
Robert Kirk
aab5118c6a Remove error causing break command 
Use index macro instead of e
 2017-01-01 17:47:01 -05:00
esenapaj
d38e335272 From "microseconds" to "milliseconds" 
delay() is milliseconds
 2017-01-02 01:19:33 +09:00
Philip Standt
8ae2bc7e2e Disable SD Detect for K8400 2016-12-28 23:21:18 +01:00
Scott Lahteine
4061fca1ad Sanity checks for FILAMENT_CHANGE_FEATURE and FILAMENT_RUNOUT_SCRIPT 2016-12-23 19:55:12 -08:00
Scott Lahteine
5ab7b91615 Comment on filament runout sensor config 2016-12-23 19:50:27 -08:00
Scott Lahteine
922c67f17d Merge pull request #5588 from thinkyhead/rc_remove_biv25 
Drop biv2.5 delta configurations
 2016-12-23 19:14:50 -08:00
Scott Lahteine
8c6c048551 drop biv2.5 delta configurations 2016-12-23 18:56:07 -08:00
Scott Lahteine
92dbeebf40 Define ADV_NEVER, ADV_RATE 2016-12-23 18:43:23 -08:00
Robert Kirk
306c184b1a Allow M600 when dryrun debugging 2016-12-21 20:30:51 -05:00
Scott Lahteine
fe2ea2906f Merge pull request #5573 from thinkyhead/rc_unify_stepper_isr 
LIN_ADVANCE with unified stepper ISR
 2016-12-21 02:53:32 -08:00
Sebastianv650
84c685f8b5 First draft of Unified Stepper / E Advance ISR 2016-12-21 01:34:39 -08:00
Scott Lahteine
83021d82c6 Merge pull request #5502 from AnHardt/symbol-strings 
Add symbol-strings
 2016-12-21 00:51:59 -08:00
Scott Lahteine
036eccfd6e Merge pull request #5572 from Kaibob2/patch-5 
Update language_de.h
 2016-12-21 00:50:40 -08:00
Scott Lahteine
b794b76836 Merge pull request #5567 from AnHardt/fix5194 
Fix 5194
 2016-12-21 00:49:52 -08:00
Scott Lahteine
451ba5df01 Merge pull request #5516 from esenapaj/Suppress-warning 
Suppress warning
 2016-12-21 00:00:35 -08:00
Scott Lahteine
92dbc63949 Merge pull request #5571 from esenapaj/Update-Japanese-translation 
Update Japanese translation
 2016-12-20 23:59:55 -08:00
Kai
ade72535c4 Update language_de.h 
Added tarnslation for
```
#define MSG_DEBUG_MENU 
#define MSG_PROGRESS_BAR_TEST
```
 2016-12-21 08:57:39 +01:00
esenapaj
ab6b005867 Suppress warning 2016-12-21 09:13:03 +09:00
AnHardt
61f15ef7e7 Fix 5194 
I have been a bit too radical in cleaning up this section.
 2016-12-21 00:45:29 +01:00
esenapaj
60515ff700 Update Japanese translation 
・Add new translation
 2016-12-21 08:44:07 +09:00
Scott Lahteine
1e419655f3 Followup to #5550 - spacing before "mm" 2016-12-20 02:27:54 -08:00
Scott Lahteine
1a26ce1cdc Merge pull request #5550 from FHeilmann/patch-2 
Allow negative retract values in the LCD
 2016-12-20 02:10:22 -08:00
Scott Lahteine
bec30c89e7 Merge pull request #5522 from esenapaj/Add-description-for-dual-x 
Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE
 2016-12-20 01:31:53 -08:00
Scott Lahteine
7739c0affa Change "+mm" to "mm" in most languages 
- Japanese and Chinese still need update
 2016-12-20 01:16:51 -08:00
Scott Lahteine
1cba425308 Allow negative recover-swap length from LCD 2016-12-20 01:16:08 -08:00
Scott Lahteine
298a8c6a3c Merge pull request #5561 from thinkyhead/rc_no_case_light 
Support for M335 case light "no case light"
 2016-12-20 01:06:59 -08:00
Scott Lahteine
644f45cbd8 Merge pull request #5563 from akaJes/m600 
FILAMENT_CHANGE_FEATURE allowed in idle mode
 2016-12-20 01:06:10 -08:00
Scott Lahteine
0d2fc13516 Place "Level Bed" closer to "Auto Home" 2016-12-20 00:51:03 -08:00
Scott Lahteine
b031d28ebf Encoder events should not skip stripes 2016-12-20 00:21:51 -08:00
Scott Lahteine
22881f38b9 Fix updating of "bool" menu items 2016-12-20 00:21:51 -08:00
Scott Lahteine
eb68715b94 No "Cooldown" menu if heaters are off 2016-12-20 00:21:51 -08:00
Jesus
4ed976b5ff m600 fixes 2016-12-20 09:47:46 +02:00
Damien
4e2639942b Support for M335 case light "no case light" 2016-12-19 23:23:08 -08:00
Scott Lahteine
18ba31e9b5 Add Debug Menu with LCD_PROGRESS_BAR_TEST as an example 2016-12-19 22:57:14 -08:00
Scott Lahteine
03af5961b0 Hide (or remove) custom character change on boot screen 2016-12-19 22:27:28 -08:00
Scott Lahteine
1642f5ed31 Add macro to some en strings 2016-12-19 22:27:28 -08:00
Scott Lahteine
dbb2d56c89 Correct comment on watchdog timer 2016-12-19 22:27:28 -08:00
Scott Lahteine
41a30923f3 Merge pull request #5559 from thinkyhead/rc_minimum_gcc_version 
Throw an error for gcc before 4.7
 2016-12-19 19:50:44 -08:00
Scott Lahteine
6d6a1db6ec Apply const to _EEPROM_writeData value param 2016-12-19 18:50:43 -08:00
Robert Kirk
f724ef5820 Have bed leveling status output current status, not requested. 2016-12-19 18:47:45 -08:00
Scott Lahteine
20218e553d Merge pull request #5527 from MagoKimbra/rc_configuration_store_fix_size 
Fix size
 2016-12-19 18:47:28 -08:00
Scott Lahteine
dcfbe2bd3c Throw an error for gcc before 4.7 2016-12-19 18:30:51 -08:00
Scott Lahteine
82fde7df2e Merge pull request #5512 from AnHardt/speed-compare-bbr 
Optimize handling of block_buffer_runtime()
 2016-12-19 18:21:06 -08:00
Scott Lahteine
8986225752 Spacing, cleanup in speed_lookuptable.h 2016-12-19 14:52:45 -08:00
Scott Lahteine
e12c8e5cac Split up thermistor tables 2016-12-19 14:47:54 -08:00
Florian Heilmann
a7334fd2a0 Allow negative retract values in the LCD 
This can already be done via G-Code, so adding the capability to the LCD should be straight forward.
 2016-12-19 14:19:06 +01:00
AnHardt
292eb365c6 Optimize handling of block_buffer_runtime() 
millis_t is long - divisions take for ever.

Return a kind of millisecond instead of microsecond -
divided by 1024 instead of 1000 for speed. (2.4% error)

That does not matter because block_buffer_runtime is
already a too short estimation.
Shrink the return-type.
 2016-12-19 11:47:28 +01:00
esenapaj
6854f44bf2 Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE 2016-12-19 02:21:10 +09:00
Scott Lahteine
3f6f036f7c Merge pull request #5524 from thinkyhead/rc_optional_dogm_splitup 
Report EEPROM data size, not final index
 2016-12-16 18:55:48 -08:00
MagoKimbra
86ba7e4542 Fix size 
Fix size for writeData and readData.
For bilinear grid 11 x 11 for example, size is 4 (float) x 11 x 11 = 484. uint8_t max is 255.
 2016-12-16 14:49:33 +01:00
Scott Lahteine
f9f75c8016 Fix USE_RAW_KINEMATICS in prepare_kinematic_move_to 2016-12-15 23:15:38 -08:00
Scott Lahteine
87921f390a Clarify what are "logical" positions in the planner 2016-12-15 23:15:38 -08:00
Scott Lahteine
a4f10f59c3 Write the E parameter length correctly 2016-12-15 23:15:38 -08:00
Scott Lahteine
2e904cb4f9 Merge pull request #5514 from esenapaj/Update-Japanese-translation 
Update Japanese translation
 2016-12-15 21:38:40 -08:00
Scott Lahteine
0b6817e0f9 Merge pull request #5505 from android444/patch-4 
Update for translations language_pl.h
 2016-12-15 21:38:18 -08:00
Scott Lahteine
3bd76f60e4 Report EEPROM data size, not final index 2016-12-15 20:26:28 -08:00
Scott Lahteine
78d6d6e076 Merge pull request #5452 from thinkyhead/rc_save_your_mesh 
Save Bed Leveling to EEPROM
 2016-12-15 20:23:01 -08:00
Scott Lahteine
0d0aa6c20d Patch type for max_acceleration_mm_per_s2 save/restore 2016-12-15 20:05:42 -08:00
Scott Lahteine
d4f5418802 Merge pull request #5517 from esenapaj/Fix-for-PR-#5255 
Fix for the PR #5255 (Case light menu (3rd attempt))
 2016-12-15 20:01:22 -08:00
Scott Lahteine
fa7010b0a1 Merge pull request #5515 from esenapaj/Remove-unnecessary-tabs-and-spaces 
Remove unnecessary tabs and spaces
 2016-12-15 19:58:32 -08:00
Scott Lahteine
6d7b1cdf6c Add M421 for ABL Bilinear 2016-12-15 19:39:11 -08:00
Scott Lahteine
32e65dc429 Extend M420 to print state and, with V, the matrix / mesh 2016-12-15 19:39:11 -08:00
Scott Lahteine
d04258753b Don't throw away the bed level matrix on G28 2016-12-15 19:21:18 -08:00
Scott Lahteine
8f0f225d10 Save ABL Planar Matrix to EEPROM 2016-12-15 19:21:15 -08:00
Scott Lahteine
e2429a9da1 Generalize Bed Leveling flag in EEPROM 2016-12-15 19:20:52 -08:00
Scott Lahteine
e42fd7813a Save ABL Bilinear Grid to EEPROM 2016-12-15 19:20:48 -08:00
Scott Lahteine
492b68f8e3 Better EEPROM read/write error handling 2016-12-15 19:08:44 -08:00
Scott Lahteine
55722c09da Use "UNPROBED" for un-probed bed_level_grid points 2016-12-15 19:08:44 -08:00
Scott Lahteine
2643404ac8 Throw an error in M420 if can't enable 2016-12-15 19:08:43 -08:00
Scott Lahteine
b1539394fd Use planner.unapply_leveling to undo tilt in G29 2016-12-15 19:08:43 -08:00
Scott Lahteine
04636f78eb Re-enable MBL/ABL after M48 2016-12-15 19:08:43 -08:00
Scott Lahteine
9b41638672 Minor tweak to G29 grid points 2016-12-15 19:08:42 -08:00
Scott Lahteine
daa2cad21f Fix comment on G29 to include 'Z' 2016-12-15 19:08:42 -08:00
Scott Lahteine
8244fefcc2 Tweak call to reset_bed_level in G29 2016-12-15 19:08:42 -08:00
Scott Lahteine
0995a5d734 Fixup reset_bed_level 2016-12-15 19:08:42 -08:00
Scott Lahteine
1b2fb2bdc7 ABL_GRID_POINTS_* => ABL_GRID_MAX_POINTS_* 2016-12-15 19:08:41 -08:00
esenapaj
d486361c69 Fix for commented section of Config_RetrieveSettings() 2016-12-16 04:34:47 +09:00
esenapaj
88157ba529 Fix for the PR #5255 (Case light menu (3rd attempt)) 2016-12-16 00:57:32 +09:00
esenapaj
069c6b38dd Remove unnecessary tabs and spaces 2016-12-16 00:21:32 +09:00
esenapaj
9c8116aedf Update Japanese translation 
・Add new translation
 2016-12-16 00:06:58 +09:00
AnHardt
57b1275cde Add symbol-string to _de 
Add symbol-string for _de
to reduce the frquencey of regenerating 'mappers' and 'fonts'
with the new utf-system.
 2016-12-15 14:37:18 +01:00
android444
3363d2c937 Update for translations language_pl.h 2016-12-14 17:32:33 +01:00
Scott Lahteine
06af3b62ba Move HOLLOW_FRAME options to config_adv 2016-12-14 04:31:27 -08:00
Scott Lahteine
67ca6c7bfe Codestyle tweaks to ultralcd.cpp 2016-12-14 04:20:33 -08:00
Scott Lahteine
8d9fcd8e6f Merge pull request #5495 from AnHardt/autoadjusting_display-updates 
Adaptive screen updates for all kinds of displays
 2016-12-14 04:16:26 -08:00
Scott Lahteine
77a360912d Merge pull request #5491 from yhfudev/devel-rcbugfix-language-headers 
UTF-8 language header files
 2016-12-14 02:23:09 -08:00
AnHardt
d0e24e0876 Adaptive screen updates for all kinds of displays 
The target here is to update the screens of graphical and char base
displays as fast as possible, without draining the planner buffer too much.

For that measure the time it takes to draw and transfer one
(partial) screen to the display. Build a max. value from that.
Because ther can be large differences, depending on how much the display
updates are interrupted, the max value is decreased by one ms/s. This way
it can shrink again.
On the other side we keep track on how much time it takes to empty the
planner buffer.
Now we draw the next (partial) display update only then, when we do not
drain the planner buffer to much. We draw only when the time in the
buffer is two times larger than a update takes, or the buffer is empty anyway.

When we have begun to draw a screen we do not wait until the next 100ms
time slot comes. We draw the next partial screen as fast as possible, but
give the system a chance to refill the buffers a bit.

When we see, during drawing a screen, the screen contend has changed,
we stop the current draw and begin to draw the new content from the top.
 2016-12-13 18:44:34 +01:00
yhfudev
2dbd38ce16 tag the utf-8 strings 2016-12-13 11:54:35 -05:00
Scott Lahteine
94ffb58da7 Prevent retract un-hop at wrong height 2016-12-13 08:24:12 -08:00
Scott Lahteine
0772c8e55f Merge pull request #5487 from thinkyhead/rc_easier_move_axis 
Rearrange Move Menu, Fix up Delta Calibration
 2016-12-13 07:07:05 -08:00
Scott Lahteine
b2c8de856b Merge pull request #5478 from AnHardt/stepspermm 
Replace ftostr62sign with ftostr62rj
 2016-12-13 07:05:42 -08:00
Scott Lahteine
1fd8185d37 Merge pull request #5492 from thinkyhead/rc_fix_language_es 
Fix multiple definitions of message macros in the language-es.h
 2016-12-13 06:57:52 -08:00
yhfudev
1cdffdede7 fix multiple definitions of message macros in the language-es.h 2016-12-13 06:48:38 -08:00
Scott Lahteine
b67f8cb499 Merge pull request #5490 from jbrazio/update-bqhp2 
Update the bq Hephestos 2 example configuration
 2016-12-13 05:04:24 -08:00
Scott Lahteine
93b2833347 Move Menu: Select axis first, resolution after 2016-12-13 03:11:14 -08:00
Scott Lahteine
48aa0f6475 Merge pull request #5475 from AnHardt/utf-mapper-tr 
utf8-mapper for Turkish
 2016-12-13 03:03:22 -08:00
Scott Lahteine
b9ee0d7bd3 Merge pull request #5488 from thinkyhead/rc_fade_compiler_warn 
Patch fade_factor compiler warning
 2016-12-13 03:00:47 -08:00
Scott Lahteine
641e0936d4 Patch up Delta Calibration Menu 2016-12-13 02:42:28 -08:00
Scott Lahteine
b4dbf4d18a Non-reentrant "Moving..." screen to safely wait in LCD 2016-12-13 02:42:27 -08:00
Scott Lahteine
7b625e0048 Patch fade_factor compiler warning 2016-12-13 02:29:01 -08:00
Scott Lahteine
6fa8fd15e2 Add negative temperatures for Thermistor 1 
Changes from #5485 by @AndKe
 2016-12-13 02:06:16 -08:00
Scott Lahteine
2b5d424394 Use handle_reprapworld_keypad for keypad handling 2016-12-13 01:41:08 -08:00
Scott Lahteine
887ed73c9b Expose delta_clip_start_height for use by others 2016-12-13 01:41:08 -08:00
João Brázio
3f75edb1d6 Updated bq Hephestos 2 example configuration 2016-12-13 09:26:07 +00:00
Daniel Martinez
b796e7031d Update Aragonese translation 2016-12-12 17:36:33 -08:00
AnHardt
cd2b74e88d Replace ftostr62sign with ftostr62rj 
`ftostr62sign()` is used only when displaing/editing
Steps/mm. A sign is not needed - the value is always positive.
Because the number part is long there is no't much place for the values name.
With this PR the is one more char for the name possible.
 2016-12-12 20:25:20 +01:00
AnHardt
795541f87e utf8-mapper for Turkish 
The non utf8 version of turkish is a bit unhandy.

Delete `language_tr.h`
Rename `language_tr_utf.h` to `language_tr.h`
Provide a propper utf8-mapper for Turkish and use it.
 2016-12-12 15:56:59 +01:00
Scott Lahteine
7c71bb2900 Merge pull request #5471 from thinkyhead/rc_planner_report_m503 
Patch to show E factors in M503
 2016-12-11 17:47:41 -08:00
Scott Lahteine
39401b7472 Patch to show E factors in M503 2016-12-11 17:37:29 -08:00
Scott Lahteine
6b50230022 Merge pull request #5447 from thinkyhead/rc_update_dutch 
Dutch cleanup, ordering, placeholders
 2016-12-10 22:13:20 -08:00
Scott Lahteine
2c97c11731 Merge pull request #5454 from thinkyhead/rc_fix_delta_g29 
Fix G29 starting height on DELTA
 2016-12-10 22:10:33 -08:00
Scott Lahteine
8239c45b30 Merge pull request #5448 from thinkyhead/rc_eeprom_bump 
EEPROM: Prolong life. Better support for `DISTINCT_E_FACTORS`.
 2016-12-10 22:06:00 -08:00
Scott Lahteine
21ed43df5f New Dutch terms 2016-12-10 21:59:45 -08:00
Scott Lahteine
4bc6536f54 Move to safe zone on DELTA if using do_blocking_move_to* 2016-12-10 21:28:24 -08:00
Scott Lahteine
6f389158d7 Compile less code with EEPROM off 2016-12-09 06:05:32 -08:00
Scott Lahteine
f2301a2a04 Add e-stepper count to EEPROM (for planner vars) 2016-12-09 06:05:31 -08:00
Scott Lahteine
53c9fca0f6 Only write to EEPROM when a byte changes 2016-12-09 06:05:31 -08:00
AnHardt
13eebd11cf volatile_block_buffer_runtime_us 
`block_buffer_runtime_us` is mangled in the planner and in the stepper-ISR.
So it needs to be volatile and interrupt protected.
 2016-12-09 14:49:02 +01:00
Scott Lahteine
8383f35b40 Merge pull request #5445 from thinkyhead/rc_reduce_jerk_code 
Slightly shrink jerk and advance code
 2016-12-09 02:54:03 -08:00
Gege2B
40453c1b9a Update french translation (LIGHTS str) 2016-12-09 11:18:29 +01:00
Scott Lahteine
fc2fc828b3 Prettify LIN_ADVANCE code with the positive condition 2016-12-09 00:29:07 -08:00
Scott Lahteine
1929502e15 Add const to some variables 2016-12-09 00:29:06 -08:00
Scott Lahteine
2da4d22520 Pretty up ADVANCE code 2016-12-08 22:51:28 -08:00
Scott Lahteine
af024e1d7c Pretty up coast / reverse jerk code 2016-12-08 22:50:25 -08:00
Scott Lahteine
3f3b5c86d8 Slightly shrink code for jerk-based reduction of safe_speed 2016-12-08 22:24:29 -08:00
AnHardt
87fe20b5f5 Simplify long_move() 
We are not really interested in, if there are blocks.
All information we need is in `block_buffer_runtime_us`.
 2016-12-09 00:13:35 +01:00
Scott Lahteine
574d9c7d3d Merge pull request #5432 from Kaibob2/patch-2 
Update language_de.h
 2016-12-08 13:14:04 -08:00
Scott Lahteine
f089279263 Merge pull request #5431 from esenapaj/Suppress-warnings,-etc 
Suppress warnings, etc
 2016-12-08 13:10:12 -08:00
Scott Lahteine
d92ccb230c Merge pull request #5438 from AnHardt/patch-long_move 
Patch long_move()
 2016-12-08 13:08:36 -08:00
AnHardt
706b240251 Patch long_move() 
While the last move in the planner_buffer is running
it's duration is already subtracted from block_buffer_runtime_us.
 2016-12-08 21:03:26 +01:00
esenapaj
a298a58684 Remove redundant "E" 2016-12-09 02:27:34 +09:00
Kai
390a6d976a Update language_de.h 
#define MSG_ENDSTOP_ABORT  doesn't fit in Display 
See https://github.com/MarlinFirmware/Marlin/issues/5401#issuecomment-265714487
 2016-12-08 12:18:19 +01:00
esenapaj
e9393c3634 Suppress warnings, etc 
・Suppress warnings
・Remove unused variable "did_update"
 2016-12-08 17:47:59 +09:00
Scott Lahteine
da6a094424 Sanity-check inverting and pullups for Z probe and Z endstop 
`Z_MIN_ENDSTOP_INVERTING` must match `Z_MIN_PROBE_ENDSTOP_INVERTING`
when using `Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN`.
This is easy to overlook.
 2016-12-08 00:12:19 -08:00
Scott Lahteine
3fb43c11fc Fix compile error with LCD_I2C_VIKI 2016-12-07 23:29:45 -06:00
Scott Lahteine
aa241c63b3 Include M205 note in configurations 2016-12-07 14:45:44 -06:00
Scott Lahteine
c8a95ec514 Merge pull request #5413 from MagoKimbra/rc_fix_mesh 
Fix Mesh without Fade Height
 2016-12-07 03:16:02 -06:00
Scott Lahteine
35ad9626f1 Merge pull request #5410 from thinkyhead/rc_polish_update 
Update Polish language, reduce filament change messages
 2016-12-07 03:15:53 -06:00
Scott Lahteine
01e5d46ea7 Patch some planner compile errors 2016-12-07 02:26:24 -06:00
MagoKimbra
5383212a28 Fix Mesh without Fade Height 2016-12-07 09:23:42 +01:00
Scott Lahteine
dbe1dc1452 Merge pull request #5406 from Rigid3D/RCBugFix 
Turkish Translation Update
 2016-12-07 00:56:08 -06:00
Scott Lahteine
4783a59249 Remove filament-change empty lines from languages 2016-12-07 00:53:03 -06:00
Scott Lahteine
1705099c3e Save space by not defining unused filament change message lines 2016-12-07 00:53:03 -06:00
android444
9b1f4b514b Update Polish language 
Translation of messages in English to Polish.
 2016-12-06 22:28:33 -06:00
Robert Marko
84f7e1de04 Updates to Croatian language 2016-12-06 22:24:12 -06:00
esenapaj
08cdaaf19b README and Version for 1.1.0-RCBugFix 
Sync with RC8
 2016-12-07 10:43:58 +09:00
Mehmet Sutas
f4663cb677 Update language_tr_utf8.h 2016-12-07 00:21:56 +03:00
Mehmet Sutas
b4fd115d4e Update language_tr.h 2016-12-07 00:20:07 +03:00
Scott Lahteine
83c5026db1 Ignore homing button when SD printing 
As suggested in #5404 by @android444
 2016-12-06 14:22:34 -06:00
Scott Lahteine
312caef472 Merge pull request #5398 from thinkyhead/rc_croatian_cleanup 
Fix Croatian spacing, extra #endif
 2016-12-06 03:22:19 -06:00
Scott Lahteine
46b65773ea Fix Croatian spacing, extra #endif 2016-12-06 03:10:37 -06:00
Scott Lahteine
3f2faac9d1 Merge pull request #5388 from thinkyhead/rc_subdivide_bilinear 
Subdivide Bilinear Grid with Catmull Rom Splines
 2016-12-05 20:28:50 -06:00
Scott Lahteine
b5b5edd9ad Merge pull request #5394 from thinkyhead/rc_drop_board_99 
Remove mystery-board 99
 2016-12-05 20:28:35 -06:00
Scott Lahteine
c48901f355 Remove mystery-board 99 2016-12-05 20:16:50 -06:00
akaJes
d7b948610a Experimental bilinear subdivision option 2016-12-05 20:11:24 -06:00
Scott Lahteine
6253b765aa Merge pull request #5389 from thinkyhead/distribute_screen_updates 
Distribute GLCD screen updates in time
 2016-12-05 20:08:33 -06:00
Scott Lahteine
b203901143 Merge pull request #5393 from AnHardt/Fix-auto_report_temperatures 
Fix auto_report_temperatures()
 2016-12-05 19:38:23 -06:00
AnHardt
59a27ed27d Fix auto_report_temperatures() 
The `auto_report_temperatures` needs a linefeed to be recognized by Repetier Host.
 2016-12-06 01:26:44 +01:00
AnHardt
a6fbd4a5d8 Distribute GLCD screen updates in time 
Currently we draw and send the screens for a graphical LCD all at once.
We draw in two or four parts but draw them directly behind each other.
For the tested status screen this takes 59-62ms in a single block.
During this time nothing else (except the interrupts) can be done.
When printing a sequence of very short moves the buffer drains - sometimes until it's empty.

This PR splits the screen update into parts.
Currently we have 10 time slots. During the first one the complete screen is drawn. (60,0,0,0,0,0,0,0,0,0,0)
Here i introduce pauses for doing other things. (30,30,0,0,0,0,0,0) or (15,15,15,15,0,0,0,0,0,0)
Drawing in consecutive time slots prevents from lagging too much. Even with a 4 stripe display all the drawing is done after 400ms.
Previous experiments with a even better distribution of the time slots like
(30,0,0,0,0,30,0,0,0,0) and (15,0,15,0,15,0,15,0,0,0) did not feel good when using the menu, because of too much lag.

Because of the previous PRs to speed up the display updates and especially reducing the difference between drawing 2 or 4 stripes,
it now makes sense for the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER to go from 2 to 4 stripes. This costs about 1-2ms per complete
screen update, but is payed back by having partial updates lasting only the half time and two additional brakes. Also ~256 byte of
framebuffer are saved in RAM.

13:45:59.213 : echo: #:17 >:13 s:30;   #:16 >:13 s:29;   S#:33 S>:26 S:59
13:46:00.213 : echo: #:16 >:14 s:30;   #:17 >:13 s:30;   S#:33 S>:27 S:60
13:46:01.215 : echo: #:17 >:13 s:30;   #:16 >:13 s:29;   S#:33 S>:26 S:59
13:46:02.215 : echo: #:16 >:13 s:29;   #:16 >:14 s:30;   S#:32 S>:27 S:59
13:46:03.214 : echo: #:17 >:13 s:30;   #:17 >:13 s:30;   S#:34 S>:26 S:60
13:46:04.214 : echo: #:16 >:13 s:29;   #:16 >:14 s:30;   S#:32 S>:27 S:59
13:46:05.212 : echo: #:16 >:14 s:30;   #:17 >:13 s:30;   S#:33 S>:27 S:60
13:46:06.212 : echo: #:17 >:13 s:30;   #:16 >:13 s:29;   S#:33 S>:26 S:59

03:30:36.779 : echo: #:8 >:7 s:15;   #:10 >:7 s:17;   #:8 >:6 s:14;   #:8 >:7 s:15;   S#:34 S>:27 S:61
03:30:37.778 : echo: #:8 >:6 s:14;   #:10 >:7 s:17;   #:9 >:7 s:16;   #:8 >:6 s:14;   S#:35 S>:26 S:61
03:30:38.778 : echo: #:8 >:6 s:14;   #:11 >:7 s:18;   #:8 >:6 s:14;   #:8 >:7 s:15;   S#:35 S>:26 S:61
03:30:39.777 : echo: #:8 >:6 s:14;   #:10 >:7 s:17;   #:8 >:8 s:16;   #:8 >:6 s:14;   S#:34 S>:27 S:61
03:30:40.780 : echo: #:8 >:6 s:14;   #:11 >:7 s:18;   #:8 >:6 s:14;   #:8 >:6 s:14;   S#:35 S>:25 S:60
03:30:41.780 : echo: #:9 >:6 s:15;   #:10 >:7 s:17;   #:8 >:6 s:14;   #:9 >:6 s:15;   S#:36 S>:25 S:61
03:30:42.779 : echo: #:8 >:6 s:14;   #:10 >:8 s:18;   #:8 >:6 s:14;   #:8 >:6 s:14;   S#:34 S>:26 S:60
03:30:43.778 : echo: #:9 >:6 s:15;   #:10 >:7 s:17;   #:8 >:7 s:15;   #:9 >:6 s:15;   S#:36 S>:26 S:62

#: draw a stripe
>: transfer a stripe
s: sum of of draw and transfer for one stripe
S#: sum of draws for a complete screen
S>: sum of transfers for a complete screen
S: time to draw and transfer a complete screen
 2016-12-05 12:22:54 -06:00
Scott Lahteine
f882355994 Merge pull request #5318 from Sebastianv650/Account_for_LCD_improvements 
Account for LCD improvements in ENSURE_SMOOTH_MOVES
 2016-12-05 11:23:58 -06:00