Bo Herrmannsen
2d1e730216
Update README.md
2015-04-17 15:00:21 +02:00
paclema
581685a231
Added new PID autotune info, to make easy copy & paste results to marlin
2015-04-17 11:15:09 +02:00
Chris Palmer
483384aaa4
Fixed faulty comment merge
2015-04-17 09:31:53 +01:00
Chris Palmer
cc6b7cf3ce
Fixed some comment spellings.
2015-04-17 09:28:08 +01:00
Chris Palmer
e4595fa24a
Fixed jump in speed when using high accelerations on axes with lots of steps.
...
I.e., when acceleration * steps per mm > 2,000,000.
This was done by changing MultiU24X24toH16 to take a 32b bit operand.
Removed the claim that stepper.cpp uses the Leib algorithm.
2015-04-16 23:04:38 +01:00
Wurstnase
b09a957fce
make 'wait' optional and mark as workaround
2015-04-16 21:42:54 +02:00
Scott Lahteine
d0b65ff642
Merge pull request #1923 from thinkyhead/babystep_delay_2us
...
Babystep delay 2us
2015-04-16 07:51:37 -07:00
Scott Lahteine
58d128b7a9
Apply zprobe_zoffset in axis_is_at_home
...
Ensure the probe offset will always be included when homing Z.
2015-04-16 07:41:19 -07:00
Scott Lahteine
63b98b8280
Raise Z for M401 and M402
2015-04-16 07:24:33 -07:00
wurstnase
d69da22f7c
last_command_time inside get_command()
2015-04-16 16:20:23 +02:00
Scott Lahteine
53be0f3399
Babystep delay 2us
2015-04-16 04:16:36 -07:00
wurstnase
574e2d856e
remove config
2015-04-16 13:07:20 +02:00
Scott Lahteine
f49a73d69f
Merge pull request #1919 from paclema/M48_mismatch
...
Fixed M48 mismatch between n and P parameter on documentation
2015-04-16 03:25:23 -07:00
paclema
cde5eee2a5
Removed unnecessary comments
2015-04-15 19:01:09 +02:00
paclema
e1b69db6d1
Fixed M48 mismatch between n and P parameter on documentation
2015-04-15 18:17:58 +02:00
Bo Herrmannsen
d0b1f70118
Update Compilation.md
2015-04-15 16:35:02 +02:00
Bo Herrmannsen
f8389b1076
Update README.md
2015-04-15 15:25:18 +02:00
elgambitero
60f46276bf
Some minor translations to spanish
2015-04-15 10:06:51 +02:00
CONSULitAS
a40c274310
Example Configuration for K8200 back in sync
...
example_configurations\K8200\Configuration.h:
* merge upstream changes from default Configuration.h manually
* add some machine specific comments
2015-04-15 10:06:50 +02:00
CONSULitAS
1de9b568db
Example Configuration for K8200: comments/URL/readme
...
Example Configuration for K8200 : comments/URL/readme
example_configurations\K8200\Configuration.h:
* add machine specific header
* change STRING_URL to K8200 fork (@thinkyhead: What do you think?)
example_configurations\K8200\readme.md:
* updated documentation
* added URLs and links
2015-04-15 10:02:13 +02:00
CONSULitAS
0af5e3a04f
Example Configuration for K8200: comments/URL/readme
...
Example Configuration for K8200 : comments/URL/readme
example_configurations\K8200\Configuration.h:
* add machine specific header
* change STRING_URL to K8200 fork (@thinkyhead: What do you think?)
example_configurations\K8200\readme.md:
* updated documentation
* added URLs and links
2015-04-15 10:00:41 +02:00
Scott Lahteine
637babb99b
Merge pull request #1915 from elgambitero/Development
...
Some minor translations to spanish
2015-04-14 19:59:39 -07:00
Scott Lahteine
71f183a3a2
Merge pull request #1913 from CONSULitAS/Development_Update_K8200_Config
...
Example Configuration for K8200 back in sync
2015-04-14 19:52:47 -07:00
elgambitero
cb9ac490d4
Some minor translations to spanish
2015-04-14 23:14:52 +02:00
CONSULitAS
3851ac6226
Example Configuration for K8200 back in sync
...
example_configurations\K8200\Configuration.h:
* merge upstream changes from default Configuration.h manually
* add some machine specific comments
2015-04-14 17:12:42 +02:00
CONSULitAS
b447a4ffab
Merge remote-tracking branch 'upstream/Development' into Development
2015-04-14 15:35:08 +02:00
Scott Lahteine
d57b23b1e3
Merge pull request #1912 from thinkyhead/some_fixes
...
Enable all old_z_*_endstop vars for Z_DUAL_ENDSTOPS
2015-04-14 05:12:49 -07:00
Scott Lahteine
7336e6df07
Always define old_z, not always z2
2015-04-14 04:55:20 -07:00
Scott Lahteine
5dd87d2e74
Enable all old_z_*_endstop vars for Z_DUAL_ENDSTOPS
...
- Potentially addressing #1911
2015-04-14 04:05:51 -07:00
Scott Lahteine
639ffc341e
Merge pull request #1910 from thinkyhead/some_fixes
...
Rename servos[] array in Marlin to servo[]
2015-04-14 03:44:20 -07:00
Scott Lahteine
3f02da646c
Make sure axis_active is cleared for #1908
2015-04-14 03:41:37 -07:00
Scott Lahteine
e0e68c5cbc
Rename servos[] array in Marlin to servo[]
2015-04-14 03:13:25 -07:00
Chris Petersen
ffaf1b4f22
Add pin configuration for Brainwave Pro
...
Copied from jcrocholl's contributions to the OpenBeamUSA Marlin fork
2015-04-13 23:46:57 -07:00
Scott Lahteine
dee6840c50
Merge pull request #1907 from thinkyhead/some_fixes
...
Fix type of code_has_value
2015-04-13 18:04:53 -07:00
Scott Lahteine
642f6a92bc
fix type of code_has_value
2015-04-13 18:02:17 -07:00
Scott Lahteine
6b51305c4b
Merge pull request #1906 from thinkyhead/some_fixes
...
Naming and code comments
2015-04-13 17:59:48 -07:00
Scott Lahteine
17ad80c1e1
Spacing in XYZ_CONSTS
2015-04-13 17:58:47 -07:00
Scott Lahteine
09d60e0128
Naming and code comments
2015-04-13 17:17:36 -07:00
Scott Lahteine
c05b347617
Merge pull request #1902 from msutas/Development
...
Fix Syntax Error Filament Runout Statement
2015-04-13 14:31:57 -07:00
Mehmet Sutas
5a9e45cc4a
Fix Syntax Error Filament Runout Statement
2015-04-13 22:37:18 +03:00
Scott Lahteine
0908c41156
Merge pull request #1899 from thinkyhead/squash_fixups
...
Several fixups
2015-04-12 23:31:31 -07:00
Scott Lahteine
257a907456
Fix typo in next_bed_check_ms
2015-04-12 23:17:28 -07:00
Scott Lahteine
e4b1e8651b
next_ vars faster than previous_
...
- Change some `previous_` time vars to `next_` so an add only happens
at intervals
- Fix `HEATER_0_USES_MAX6675` polling too frequently, or not at all
2015-04-12 23:06:50 -07:00
Scott Lahteine
cfa60bdb97
Merge branch 'Development' into squash_fixups
...
Conflicts:
Marlin/ultralcd.cpp
2015-04-12 22:51:18 -07:00
Scott Lahteine
ccddc280be
Apply three more commits
2015-04-12 22:47:44 -07:00
Scott Lahteine
666f9cd7b4
Merge pull request #1897 from epatel/Development
...
Manual bed leveling menu fixes.
2015-04-12 21:26:36 -07:00
Scott Lahteine
e7aae314de
Merge pull request #1896 from thinkyhead/cold_extrude
...
Homing fixes
2015-04-12 17:50:19 -07:00
Scott Lahteine
74e4b42f7e
Default MACHINE_NAME to "3D Printer"
2015-04-12 17:17:41 -07:00
Scott Lahteine
8857b9e921
Use the extruder argument in plan_buffer_line
2015-04-12 16:57:00 -07:00
Edward Patel
a37c7ff16d
Manual bed leveling menu fixes.
...
lcdDrawUpdate = 2 helped a lot!
2015-04-12 16:56:17 +02:00
