bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
2,257 Commits 1 Branch 4 Tags 151 MiB
9eed8c8cf0
Commit Graph

1800 Commits

Author SHA1 Message Date
Neil Darlow
6e3406d228 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-07-01 10:27:39 +01:00
alexborro
43c298a7a9 Add "Thermal Runaway Protection" feature 
This is a feature to protect your printer from burn up in flames if it
has a thermistor coming off place (this happened to a friend of mine
recently and motivated me writing this feature).

The issue: If a thermistor come off, it will read a lower temperature
than actual. The system will turn the heater on forever, burning up the
filament and anything
else around.

After the temperature reaches the target for the first time, this
feature will start measuring for how long the current temperature stays
below the target minus _HYSTERESIS (set_temperature -
THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).

If it stays longer than _PERIOD, it means the thermistor temperature
cannot catch up with the target, so something *may be* wrong. Then, to
be on the safe side, the system will he halt.

Bear in mind the count down will just start AFTER the first time the
thermistor temperature is over the target, so you will have no problem
if your extruder heater takes 2 minutes to hit the target on heating.
 2014-06-30 15:22:49 -03:00
Pablo Clemente
d86c3cf43c Changed the type of variable to bool, the name to "cancel_heatup", flags implementation and added this fix to M190 gcode too. 2014-06-30 15:12:13 +02:00
cocktailyogi
f0cab611db optimised some math-code 2014-06-24 18:43:36 +02:00
Oskar Linde
269a068032 Fix lcd itostr3() to handle negative numbers 2014-06-24 14:31:15 +02:00
cocktailyogi
fae7d08698 fixed wrong compiler-option 2014-06-23 18:16:42 +02:00
cocktailyogi
512f2a3136 restore Branch from Backup 
sorry for that
 2014-06-23 17:09:57 +02:00
Pablo Clemente
cd3220d055 Inverted state logic for forced_heating_stop variable 2014-06-13 08:39:58 +02:00
Pablo Clemente
86b4b805d2 Fixed stop print LCD function on M104 2014-06-12 18:43:16 +02:00
Greg Tan
6e6e4e2143 Added thermistor table for the 500C thermistor shipped with the Pico hot end. 2014-06-08 09:35:04 +08:00
Neil Darlow
9d11b70436 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-06-07 20:48:25 +01:00
Gina Häußge
0de826160e M30 response is missing linefeed, "ok" therefore not on own line 
This leads to the command not being acknowledged properly
by the firmware, leading to consecutive issues in host software
waiting for an acknowledgement.
 2014-06-02 17:11:32 +02:00
Dim3nsioneer
3c927901a4 Implementation of FW extruder change retract 
FW retraction is extended onto swap retraction invoked by 'G10 S1'.
Bookkeeping of the retract state of all extruders allows for having one
extruder fw standard retracted while another extruder is swap retracted.
An LCD menu item for the swap retract and recover length was added.
 2014-06-02 17:02:10 +02:00
Dim3nsioneer
8a32c5395b renaming the disable inactive extruder feature 2014-06-02 14:07:02 +02:00
Dim3nsioneer
29e7639933 Add switch unused feeder(s) off 
Having the non-active feeder motors powered on all the time is not
necessary. A feature to deactivate the unused feeder motors has been
implemented. The feature is enabled on default but can be switched off
in the configuration.
 2014-06-02 08:13:09 +02:00
Justin Nesselrotte
07c0eeee99 Fixed a comment in the planner 2014-06-01 19:04:41 -05:00
David Forrest
09b84faa00 Configuration.h, pins.h: Add MOTHERBOARD 84 for Teensy++2.0 2014-05-29 17:19:16 -04:00
neildarlow
efb6d61413 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-05-24 13:08:58 +01:00
nothinman
38192cb5f3 Add M112 description to Marlin_main 2014-05-20 15:20:19 +01:00
nothinman
aed5ec008a Merge pull request #851 from DanNixon/estop 
Implemented M112
 2014-05-19 17:55:34 +01:00
Erik van der Zalm
cfb98ef682 More coverity fixes 2014-05-15 22:09:50 +02:00
zaubara
92e14298b0 Fixes typo for lcd backlighting on I2C PCF8575 
When using LCD_I2C_TYPE_PCF8575T (like Sainsmart I2C), the backlight
won't come on; the incorrect ifdef blocks the evocation of the backlight
functions.
 2014-05-15 01:37:23 +02:00
Erik van der Zalm
9db9842aea Fixed error found by the free coverity tool (https://scan.coverity.com/) 
===================================================
Hi,

Please find the latest report on new defect(s) introduced to ErikZalm/Marlin found with Coverity Scan.

Defect(s) Reported-by: Coverity Scan
Showing 15 of 15 defect(s)

** CID 59629:  Unchecked return value  (CHECKED_RETURN)
/Marlin_main.cpp: 2154 in process_commands()()

** CID 59630:  Operands don't affect result  (CONSTANT_EXPRESSION_RESULT)
/Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Tone.cpp: 319 in tone(unsigned char, unsigned int, unsigned long)()

** CID 59631:  Missing break in switch  (MISSING_BREAK)
/Marlin_main.cpp: 1187 in process_commands()()

** CID 59632:  Missing break in switch  (MISSING_BREAK)
/Marlin_main.cpp: 1193 in process_commands()()

** CID 59633:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 914 in disable_heater()()

** CID 59634:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 913 in disable_heater()()

** CID 59635:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 626 in analog2temp(int, unsigned char)()

** CID 59636:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 620 in analog2temp(int, unsigned char)()

** CID 59637:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 202 in PID_autotune(float, int, int)()

** CID 59638:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 214 in PID_autotune(float, int, int)()

** CID 59639:  Out-of-bounds write  (OVERRUN)
/Marlin_main.cpp: 2278 in process_commands()()

** CID 59640:  Out-of-bounds read  (OVERRUN)
/Marlin_main.cpp: 1802 in process_commands()()

** CID 59641:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 51 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()

** CID 59642:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 45 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()

** CID 59643:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 32 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()

________________________________________________________________________________________________________
*** CID 59629:  Unchecked return value  (CHECKED_RETURN)
/Marlin_main.cpp: 2154 in process_commands()()
2148                 }
2149               #endif
2150             }
2151           }
2152           break;
2153         case 85: // M85
   CID 59629:  Unchecked return value  (CHECKED_RETURN)
   Calling "code_seen" without checking return value (as is done elsewhere 66 out of 67 times).
2154           code_seen('S');
2155           max_inactive_time = code_value() * 1000;
2156           break;
2157         case 92: // M92
2158           for(int8_t i=0; i < NUM_AXIS; i++)
2159           {

________________________________________________________________________________________________________
*** CID 59630:  Operands don't affect result  (CONSTANT_EXPRESSION_RESULT)
/Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Tone.cpp: 319 in tone(unsigned char, unsigned int, unsigned long)()
313         else
314         {
315           // two choices for the 16 bit timers: ck/1 or ck/64
316           ocr = F_CPU / frequency / 2 - 1;
317
318           prescalarbits = 0b001;
   CID 59630:  Operands don't affect result  (CONSTANT_EXPRESSION_RESULT)
   "ocr > 65535U" is always false regardless of the values of its operands. This occurs as the logical operand of if.
319           if (ocr > 0xffff)
320           {
321             ocr = F_CPU / frequency / 2 / 64 - 1;
322             prescalarbits = 0b011;
323           }
324

________________________________________________________________________________________________________
*** CID 59631:  Missing break in switch  (MISSING_BREAK)
/Marlin_main.cpp: 1187 in process_commands()()
1181         case 2: // G2  - CW ARC
1182           if(Stopped == false) {
1183             get_arc_coordinates();
1184             prepare_arc_move(true);
1185             return;
1186           }
   CID 59631:  Missing break in switch  (MISSING_BREAK)
   The above case falls through to this one.
1187         case 3: // G3  - CCW ARC
1188           if(Stopped == false) {
1189             get_arc_coordinates();
1190             prepare_arc_move(false);
1191             return;
1192           }

________________________________________________________________________________________________________
*** CID 59632:  Missing break in switch  (MISSING_BREAK)
/Marlin_main.cpp: 1193 in process_commands()()
1187         case 3: // G3  - CCW ARC
1188           if(Stopped == false) {
1189             get_arc_coordinates();
1190             prepare_arc_move(false);
1191             return;
1192           }
   CID 59632:  Missing break in switch  (MISSING_BREAK)
   The above case falls through to this one.
1193         case 4: // G4 dwell
1194           LCD_MESSAGEPGM(MSG_DWELL);
1195           codenum = 0;
1196           if(code_seen('P')) codenum = code_value(); // milliseconds to wait
1197           if(code_seen('S')) codenum = code_value() * 1000; // seconds to wait
1198

________________________________________________________________________________________________________
*** CID 59633:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 914 in disable_heater()()
908          WRITE(HEATER_0_PIN,LOW);
909        #endif
910       #endif
911
912       #if defined(TEMP_1_PIN) && TEMP_1_PIN > -1
913         target_temperature[1]=0;
   CID 59633:  Out-of-bounds write  (OVERRUN)
   Overrunning array "soft_pwm" of 1 bytes at byte offset 1 using index "1".
914         soft_pwm[1]=0;
915         #if defined(HEATER_1_PIN) && HEATER_1_PIN > -1
916           WRITE(HEATER_1_PIN,LOW);
917         #endif
918       #endif
919

________________________________________________________________________________________________________
*** CID 59634:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 913 in disable_heater()()
907        #if defined(HEATER_0_PIN) && HEATER_0_PIN > -1
908          WRITE(HEATER_0_PIN,LOW);
909        #endif
910       #endif
911
912       #if defined(TEMP_1_PIN) && TEMP_1_PIN > -1
   CID 59634:  Out-of-bounds write  (OVERRUN)
   Overrunning array "target_temperature" of 1 2-byte elements at element index 1 (byte offset 2) using index "1".
913         target_temperature[1]=0;
914         soft_pwm[1]=0;
915         #if defined(HEATER_1_PIN) && HEATER_1_PIN > -1
916           WRITE(HEATER_1_PIN,LOW);
917         #endif
918       #endif

________________________________________________________________________________________________________
*** CID 59635:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 626 in analog2temp(int, unsigned char)()
620       if(heater_ttbl_map[e] != NULL)
621       {
622         float celsius = 0;
623         uint8_t i;
624         short (*tt)[][2] = (short (*)[][2])(heater_ttbl_map[e]);
625
   CID 59635:  Out-of-bounds read  (OVERRUN)
   Overrunning array "heater_ttbllen_map" of 1 bytes at byte offset 1 using index "e" (which evaluates to 1).
626         for (i=1; i<heater_ttbllen_map[e]; i++)
627         {
628           if (PGM_RD_W((*tt)[i][0]) > raw)
629           {
630             celsius = PGM_RD_W((*tt)[i-1][1]) +
631               (raw - PGM_RD_W((*tt)[i-1][0])) *

________________________________________________________________________________________________________
*** CID 59636:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 620 in analog2temp(int, unsigned char)()
614         if (e == 0)
615         {
616           return 0.25 * raw;
617         }
618       #endif
619
   CID 59636:  Out-of-bounds read  (OVERRUN)
   Overrunning array "heater_ttbl_map" of 1 2-byte elements at element index 1 (byte offset 2) using index "e" (which evaluates to 1).
620       if(heater_ttbl_map[e] != NULL)
621       {
622         float celsius = 0;
623         uint8_t i;
624         short (*tt)[][2] = (short (*)[][2])(heater_ttbl_map[e]);
625

________________________________________________________________________________________________________
*** CID 59637:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 202 in PID_autotune(float, int, int)()
196       {
197          soft_pwm_bed = (MAX_BED_POWER)/2;
198          bias = d = (MAX_BED_POWER)/2;
199        }
200        else
201        {
   CID 59637:  Out-of-bounds write  (OVERRUN)
   Overrunning array "soft_pwm" of 1 bytes at byte offset 1 using index "extruder" (which evaluates to 1).
202          soft_pwm[extruder] = (PID_MAX)/2;
203          bias = d = (PID_MAX)/2;
204       }
205
206
207

________________________________________________________________________________________________________
*** CID 59638:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 214 in PID_autotune(float, int, int)()
208
209      for(;;) {
210
211         if(temp_meas_ready == true) { // temp sample ready
212           updateTemperaturesFromRawValues();
213
   CID 59638:  Out-of-bounds read  (OVERRUN)
   Overrunning array "current_temperature" of 1 4-byte elements at element index 1 (byte offset 4) using index "extruder" (which evaluates to 1).
214           input = (extruder<0)?current_temperature_bed:current_temperature[extruder];
215
216           max=max(max,input);
217           min=min(min,input);
218           if(heating == true && input > temp) {
219             if(millis() - t2 > 5000) {

________________________________________________________________________________________________________
*** CID 59639:  Out-of-bounds write  (OVERRUN)
/Marlin_main.cpp: 2278 in process_commands()()
2272               tmp_extruder = code_value();
2273               if(tmp_extruder >= EXTRUDERS) {
2274                 SERIAL_ECHO_START;
2275                 SERIAL_ECHO(MSG_M200_INVALID_EXTRUDER);
2276               }
2277             }
   CID 59639:  Out-of-bounds write  (OVERRUN)
   Overrunning array "volumetric_multiplier" of 1 4-byte elements at element index 1 (byte offset 4) using index "tmp_extruder" (which evaluates to 1).
2278             volumetric_multiplier[tmp_extruder] = 1 / area;
2279           }
2280           break;
2281         case 201: // M201
2282           for(int8_t i=0; i < NUM_AXIS; i++)
2283           {

________________________________________________________________________________________________________
*** CID 59640:  Out-of-bounds read  (OVERRUN)
/Marlin_main.cpp: 1802 in process_commands()()
1796             int pin_status = code_value();
1797             int pin_number = LED_PIN;
1798             if (code_seen('P') && pin_status >= 0 && pin_status <= 255)
1799               pin_number = code_value();
1800             for(int8_t i = 0; i < (int8_t)sizeof(sensitive_pins); i++)
1801             {
   CID 59640:  Out-of-bounds read  (OVERRUN)
   Overrunning array "sensitive_pins" of 28 2-byte elements at element index 55 (byte offset 110) using index "i" (which evaluates to 55).
1802               if (sensitive_pins[i] == pin_number)
1803               {
1804                 pin_number = -1;
1805                 break;
1806               }
1807             }

________________________________________________________________________________________________________
*** CID 59641:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 51 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()
45     }
46
47     LiquidCrystal::LiquidCrystal(uint8_t rs,  uint8_t enable,
48     			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3)
49     {
50       init(1, rs, 255, enable, d0, d1, d2, d3, 0, 0, 0, 0);
   CID 59641:  Uninitialized scalar field  (UNINIT_CTOR)
   Non-static class member "_initialized" is not initialized in this constructor nor in any functions that it calls.
51     }
52
53     void LiquidCrystal::init(uint8_t fourbitmode, uint8_t rs, uint8_t rw, uint8_t enable,
54     			 uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
55     			 uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
56     {

________________________________________________________________________________________________________
*** CID 59642:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 45 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()
39     }
40
41     LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable,
42     			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3)
43     {
44       init(1, rs, rw, enable, d0, d1, d2, d3, 0, 0, 0, 0);
   CID 59642:  Uninitialized scalar field  (UNINIT_CTOR)
   Non-static class member "_initialized" is not initialized in this constructor nor in any functions that it calls.
45     }
46
47     LiquidCrystal::LiquidCrystal(uint8_t rs,  uint8_t enable,
48     			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3)
49     {
50       init(1, rs, 255, enable, d0, d1, d2, d3, 0, 0, 0, 0);

________________________________________________________________________________________________________
*** CID 59643:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 32 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()
26
27     LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable,
28     			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
29     			     uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
30     {
31       init(0, rs, rw, enable, d0, d1, d2, d3, d4, d5, d6, d7);
   CID 59643:  Uninitialized scalar field  (UNINIT_CTOR)
   Non-static class member "_initialized" is not initialized in this constructor nor in any functions that it calls.
32     }
33
34     LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t enable,
35     			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
36     			     uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
37     {

________________________________________________________________________________________________________
To view the defects in Coverity Scan visit, http://scan.coverity.com/projects/2224?tab=overview
 2014-05-14 21:59:48 +02:00
Neil Darlow
e541323741 Merge https://github.com/ErikZalm/Marlin into Marlin_v1 2014-05-09 15:02:50 +01:00
Alejandro Romero
1c9a70cee9 Support for Gen3 Monolithic electronics 
Techzone Monotronics support, ignoring the tip manager and using fan connector as on Sprinter FW
TODO: Add support for tipmanager
 2014-05-06 19:24:20 -05:00
daid
2acd3792fc Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1 2014-05-01 12:03:47 +02:00
daid
8b4c4aa5c3 Add feature to check&retry CRC read errors on SD. 2014-05-01 12:03:41 +02:00
nothinman
ce76843dc3 Merge pull request #897 from Makible/5DPrint_D8_Board_Support 
5DPrint D8 Controller Board Support
 2014-04-28 22:11:28 +01:00
Cameron Lai
ad5c8cbba9 Add safety limit for hot bed power in example configuration 2014-04-25 17:04:24 +08:00
Cameron Lai
6460709d92 Fix bug in PID Autotune report 2014-04-25 16:05:05 +08:00
Cameron Lai
105bebb466 Fix for pin mapping for SDSS pin and Fan pin, so Arduino library can be used 2014-04-25 12:57:47 +08:00
Cameron Lai
97ead2eccb Fix for microstepping pin mapping, not using Teensy pin mapping, but Arduino's default pin mapping so Arduino library can be used 2014-04-25 12:57:11 +08:00
Cameron Lai
d85411f13a Revert "Fix for stepper microstepping" 
This reverts commit eea3ba5588.
 2014-04-25 12:41:56 +08:00
Cameron Lai
7c7f2d094e Revert "Fix for reading microstepping resolution" 
This reverts commit 2715f6ddbf.
 2014-04-25 12:41:48 +08:00
Cameron Lai
e2d703377a Enable EEPROM by default for 5DPrint D8 Controller Board in example configuration 2014-04-24 19:15:35 +08:00
Cameron Lai
2715f6ddbf Fix for reading microstepping resolution 2014-04-24 17:48:33 +08:00
Cameron Lai
39e9b133f3 Add example configuration for Makibox printer, which uses the 5DPrint D8 Driver Board 2014-04-24 17:06:07 +08:00
Cameron Lai
da6b536182 Add 5DPrint D8 Driver Board info and temperature table for Makibox hot bed 2014-04-24 16:49:42 +08:00
Cameron Lai
3a8e36f19e Add Digipot config for 5DPrint D8 Driver Board 2014-04-24 12:56:46 +08:00
Cameron Lai
eea3ba5588 Fix for stepper microstepping 2014-04-24 12:56:06 +08:00
Cameron Lai
1cbcbb0971 Add makibox machine information 2014-04-24 12:55:21 +08:00
Cameron Lai
2fa514e88a Add port for 5DPrint D8 Driver board 2014-04-24 12:55:00 +08:00
nothinman
b9126ab497 Merge pull request #894 from MyMakibox/Marlin_v1 
Update Marlin_main.cpp
 2014-04-23 16:23:56 +01:00
MyMakibox
21ec6b88c3 Update Marlin_main.cpp 
Added description of autotemp flags to M109
 2014-04-23 17:33:26 +08:00
MyMakibox
e4dc80d3d3 Update Configuration_adv.h 
Corrected error in AUTOTEMP instructions
 2014-04-23 17:30:07 +08:00
Neil Darlow
6adbdf42e0 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-04-21 15:10:57 +01:00
whosawhatsis
27d544ac25 Speed up QUICK_HOME feedrate for diagonal move 
Speed up the diagonal move while still keeping each individual axis at
or below its homing feedrate.
 2014-04-19 17:29:20 -07:00
nothinman
013793bbe9 Merge pull request #878 from koldoartola/Marlin_v1 
Added new language (Basque-Euskera)
 2014-04-13 22:37:39 +01:00
koldo artola
e5b70237c7 Added new language (Basque-Euskera) 
Added:
* new language (Basque-Euskera)
* some minor corrections for Spanish
* added 2 new constants for every language (required for a minor change
I am preparing to ultralcd.cpp)
 2014-04-13 22:19:38 +02:00
Nutz95
ed6f4a71c5 fix wrong temptable index 2014-04-13 18:00:55 +02:00
Nutz95
3161740df9 This table is made for thermistor 3950 (can be found on ebay for cheap) 
it's caracteristics are :

R25℃ ;100KΩ±1%

B Value(R25/50℃)：3990K 1%
Dissipation Factor(mW/℃)：1.1~1.6 In still Air
Thermal Time Constant(S)：10~17 In Still Air
Operating temperature range：  (-50~+260°C)
Dimension：  1.8mm Dia X4.1mm
Lead Length  ：30mm

This table was found on the following blogs:
http://cae2100.wordpress.com/2014/03/08/beta3950-thermistor-table-for-marlin/

and

http://microfabricator.com/articles/view/id/531ad7e59aad9d3131000000/beta-3950-thermistor-table-for-marlin
 2014-04-13 17:03:20 +02:00
nothinman
086ff1644f Merge pull request #852 from pixatintes/patch-1 
Update language.h
 2014-04-13 00:46:17 +01:00
nothinman
3ffc9651b1 Merge pull request #845 from DerSchultze/Sanguinololu-servo 
Added servo pin assignments to Sanguinololu
 2014-04-13 00:37:28 +01:00
nothinman
357b87b498 Merge pull request #826 from paciotti/patch-1 
Configuration_adv.h
 2014-04-13 00:22:25 +01:00
neildarlow
95ad6ec9a1 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-04-12 22:20:45 +01:00
Gabe Rosenhouse
27a7cf9fcf use existing strings 2014-04-07 05:01:48 -05:00
Gabe Rosenhouse
d3f305332a Allowable range now includes default value 2014-04-06 19:45:56 -05:00
Gabe Rosenhouse
b0aeac117f Adjustable Z probe offset, via custom M-code 2014-04-06 19:45:56 -05:00
Neil Darlow
73b380d8d2 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-04-06 19:15:29 +01:00
nothinman
c23376f2e7 Merge pull request #837 from whosawhatsis/fwretract 
FWRETRACT in mm/s
 2014-04-04 11:47:58 +01:00
nothinman
dfb98101e4 Change CONTROLLERFAN_PIN for board 35 to -1, as it would conflict with board's 33 extruder pin, causing burnout (it's the same board, just different number of fans/extruders, therefore should be pin-compatible) 2014-04-03 18:05:48 +01:00
nothinman
f1501317ca Merge pull request #860 from drf5n/therm3950 
thermistortables.h: Add comments that table 60 uses beta=3950.
 2014-04-02 18:29:57 +01:00
nothinman
9a5d23d96f Merge pull request #866 from sakunamary/Marlin_v1 
fix bug for dual extruders not working
 2014-04-02 18:27:42 +01:00
nothinman
303ee67896 Merge pull request #864 from whosawhatsis/M200 
fix bug in M200 with multiple extruders
 2014-04-02 18:26:15 +01:00
Tim
8759508319 fix bug for dual extruders not working 
some guy find that marlin not working good for dual extruders delta .
when type T0 or T1 to active extruder and  E0 or E1  move causing XYZ
motion . so i locales the bugs and fix it , I have dry run the fix.
 2014-04-01 09:26:19 +08:00
whosawhatsis
a65564eef6 fix bug in M200 with multiple extruders 2014-03-30 11:42:22 -07:00
whosawhatsis
aeaf9b9312 fix bug in M200 with multiple extruders 2014-03-30 11:41:57 -07:00
Neil Darlow
89f78b0b80 Allow use of either SD Card slot when LCD Panel is configured. 
Preference is for Controller SD slot before LCD Panel slot when both are occupied.
 2014-03-27 17:02:17 +00:00
David Forrest
b0093a1513 thermistortables.h: Add comments that table 60 uses beta=3950. 2014-03-26 23:41:10 -04:00
pixatintes
a3530d1141 Update language.h 
Updated to latest version.
 2014-03-23 18:06:48 +01:00
pixatintes
990e770e15 Update language.h 
Added catalan language
 2014-03-23 10:30:08 +01:00
Dan Nixon
f643f4d674 Test and refactor 2014-03-21 20:42:00 +00:00
neildarlow
bbe8fbe13d Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-03-21 18:27:14 +00:00
Dim3nsioneer
c8cdd1fc6f Bugfixes for language option 6 (russian) 2014-03-19 14:27:38 +01:00
Dim3nsioneer
7395dafc1e semantic changes in language.h 2014-03-19 12:30:50 +01:00
Dim3nsioneer
fad2a60ce6 Corrections for preheat extension in language.h 2014-03-19 12:23:35 +01:00
Ralf Schultz
eecda434fb Sanguinololu servo pins set default disabled 2014-03-18 08:25:20 +01:00
Dim3nsioneer
944ced87c5 Extended Preheat options 
Preheat LCD menus base on code by D-Base
 2014-03-17 18:37:46 +01:00
Ralf Schultz
06709ad60e Added servo pin assignments to Sanguinololu 2014-03-17 15:45:13 +01:00
Dim3nsioneer
3906f27c46 Individual extruder flow rate 
Extension of M221, Tune menu
 2014-03-15 18:09:46 +01:00
Dan Nixon
a38c90ee84 Added estop handling 2014-03-15 15:56:15 +00:00
ErikZalm
a00cec8b71 Merge pull request #833 from mattsch/optional_feedrate_multiplier 
Add support for disabling encoder control for feedrate multiplier
 2014-03-15 15:41:45 +01:00
neildarlow
af8be9013b Merge branch 'lcd_detected' of https://github.com/whosawhatsis/Marlin into Marlin_v1 2014-03-15 07:24:47 +00:00
whosawhatsis
0ddee3c7db Prevent SD card insertion from causing a hang when using LiquidTWI2 device detection 2014-03-14 18:46:25 -07:00
Dan Nixon
272072fa20 Added M112 2014-03-14 23:19:43 +00:00
whosawhatsis
aab61e63c3 FWRETRACT in mm/s 
Firmware retraction now stores the retract and recover speeds in mm/s
instead of mm/min. This makes it match the units of the maximum
feedrate, and fixes problems with modifying the value via LCD control
panel. From gcode, the values are still taken in mm/min to match the
units of G1 and similar, and they are converted to mm/s before they are
stored.

I also lowered the default retract feedrate to make it less likely to
cause problems for geared extruders when the user hasn’t bothered to
set a reasonable maximum feedrate, though users should be setting both
of these values to suit their hardware.
 2014-03-14 15:17:28 -07:00
Matthew Schick
6cd85e6008 Add support for disabling encoder control for feedrate multiplier 
Signed-off-by: Matthew Schick <matthew.schick@gmail.com>
 2014-03-12 18:13:50 -04:00
blddk
09af1b90b8 Added CHDK support 
Added CHDK support to take pictures instead of doing an IR command, see more about how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
 2014-03-10 21:57:08 +01:00
blddk
765b2da3d4 Added CHDK support 
Added so M240 can be used to trigger CHDK instead of sending an IR signal, see more about CHDK here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
 2014-03-10 21:52:33 +01:00
paciotti
881e348eed Update Configuration_adv.h 
Increase Z_HOME_RETRACT_MM to 2mm default to avoid end stop not switching during retract.
 2014-03-08 22:35:05 +01:00
neildarlow
5a332df47e Merge https://github.com/ErikZalm/Marlin into Marlin_v1 2014-03-06 20:56:44 +00:00
Tommi Lamberg
15d1b8d719 Fixed finnish translation 
- Fixed Few finnish transalations
- Removed duplicate contrast define
 2014-03-05 14:02:52 +02:00
neildarlow
7325d7102e Activate LiquidTWI2 device detection and space-pad LCD status line. 2014-03-03 21:01:27 +00:00
ErikZalm
7f76a0e064 Merge pull request #813 from drf5n/PID_DEBUG 
temperature.cpp: Fix PID_DEBUG compile error.
 2014-02-26 17:31:48 +01:00
Erik van der Zalm
fcd8524b6e Only increase EEPROM version for DELTA printers. 2014-02-26 17:29:27 +01:00
Jim Morris
8ea5665ee2 Merge remote-tracking branch 'origin/Marlin_v1' into add/M665-set-delta-configuration 
Conflicts:
	Marlin/Marlin_main.cpp
 2014-02-26 00:19:28 -08:00
David Forrest
8c4377dd63 temperature.cpp: Fix PID_DEBUG compile error. 2014-02-26 00:44:22 -05:00
ErikZalm
fde8c2c310 Merge pull request #807 from Cylindric3D/typofixes_upstream5 
Various typo fixes #5 - only in comments, no code changes.
 2014-02-25 18:49:41 +01:00
Cylindric
fdce91192e Various typo fixes - only in comments, no code changes. 2014-02-25 10:01:15 +00:00
Cylindric
d819c55395 Various typo fixes - only in comments, no code changes. 2014-02-25 09:52:58 +00:00
ErikZalm
fd4542f33a Merge pull request #805 from whosawhatsis/M200 
autretract fix
 2014-02-24 22:35:08 +01:00
ErikZalm
e8291ed728 Merge pull request #802 from Makers-Tool-Works/Marlin_v1 
Clarify which PID values to enter
 2014-02-24 22:31:13 +01:00
ErikZalm
465b654d24 Merge pull request #797 from Cylindric3D/update_menu_plan 
Update menu plan
 2014-02-24 22:30:19 +01:00
ErikZalm
88506a80c3 Merge pull request #789 from smiler/Marlin_v1 
Fixed typo.
 2014-02-24 22:26:31 +01:00
ErikZalm
b514d3c87f Merge pull request #781 from Cylindric3D/typofixes_upstream 
Various typo fixes #3 - only in comments, no code changes.
 2014-02-24 22:25:38 +01:00
whosawhatsis
77df0d689a autretract fix 
I made these changes previously, but I can’t find the commit now. This
reapplies the changes to get auto retract working again.

Conflicts:
	Marlin/Configuration_adv.h
	Marlin/Marlin_main.cpp
 2014-02-24 13:24:38 -08:00
ErikZalm
cc5f1d475c Merge pull request #772 from ellensp/Marlin_v1 
Updated gen3+ board pins names to current convention
 2014-02-24 22:22:15 +01:00
Cylindric
91759dede6 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into typofixes_upstream 2014-02-24 17:29:37 +00:00
Cylindric
557217fc05 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into update_menu_plan 2014-02-24 17:29:24 +00:00
RoyOnWheels
aee63afccd Clarify which PID values to enter 
Users can be confused as to which values to enter after a PID tune. Updating the message to help clarity it.
New message: "PID Autotune finished! Put the last Kp, Ki and Kd constants from above into Configuration.h"

Old message: "PID Autotune finished! Put the Kp, Ki and Kd constants into Configuration.h"
 2014-02-23 14:36:50 -08:00
Gabe Rosenhouse
99f6326544 Remove unnecessary dependency on time.h from qr_solve.cpp 
Fixed compiler errors on Ubuntu using arduino-core
 2014-02-20 16:43:37 -08:00
Cylindric
ea669cb504 Fix some extra and some missing tabs, to make the file consistent. 2014-02-20 14:28:29 +00:00
Cylindric
b46a1b6360 Update the menu plan document with the current menu as per ultralcd.cpp. 2014-02-20 14:20:27 +00:00
Cylindric
3cc7626d1f Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into update_menu_plan 2014-02-20 14:12:10 +00:00
Gabe Rosenhouse
174b8d99d5 Simplify 3-point probing using new code only 2014-02-19 21:48:05 -08:00
Gabe Rosenhouse
3b718b816c better documentation 2014-02-19 14:04:37 -08:00
Gabe Rosenhouse
34fd59c370 ABL at any points 2014-02-19 13:18:21 -08:00
Cylindric
541155ea87 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into typofixes_upstream 2014-02-19 15:52:18 +00:00
alexborro
9fa328e5c8 Merge pull request #793 from MissionSt/use_axis_enums 
Use constants instead of numeric literals
 2014-02-19 10:15:57 -03:00
Gabe Rosenhouse
f308a8af91 update comment 2014-02-19 01:06:24 -08:00
Gabe Rosenhouse
357e31270a Prevent G29 without first homing in X and Y 
If position is unknown, then G29 can be dangerous.
 2014-02-19 00:51:43 -08:00
Gabe Rosenhouse
d2d7d186b5 Use descriptive constants, more 2014-02-19 00:10:17 -08:00
Gabe Rosenhouse
2ccdf4f36d Use descriptive constants instead of numeric literals 2014-02-19 00:02:59 -08:00
Christian Axelsson
c00383f286 Fixed typo. 2014-02-18 18:50:12 +01:00
Cylindric
60f72a78a9 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into typofixes_upstream 2014-02-18 17:31:58 +00:00
nothinman
abba7a0003 Merge pull request #782 from marcovannoord/Marlin_v1 
Added dutch to language.h
 2014-02-18 16:19:50 +00:00
Cylindric
b868d668fa Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into typofixes_upstream 2014-02-18 12:11:01 +00:00
Marco
8212d8d543 Revert "Fixed small typo that would prevent compiling" 
This reverts commit 51ae4881ab.
 2014-02-18 10:40:25 +01:00
daid
46bae30573 Merge pull request #776 from whosawhatsis/fwretract 
Fwretract fixes, cleanup
 2014-02-18 10:39:28 +01:00
Marco
51ae4881ab Fixed small typo that would prevent compiling 2014-02-18 09:47:36 +01:00
Marco
498d76fd79 Fixed some messages where the text shown on the screen was more than 17 characters 2014-02-18 09:40:10 +01:00
Jim Morris
af9395ac2e Add M605 to dynamically set delta configuration 
Save above configs in eeprom
fix docs in createTemperatureLookupMarlin.py
add missing azteegX3pro digipot settings in delta example config
 2014-02-17 20:50:59 -08:00
nothinman
fd42f0d226 Merge pull request #783 from MissionSt/fix/syntax-error 
Fix compile error
 2014-02-17 20:59:43 +00:00
nothinman
96217bf36a Merge pull request #777 from PxT/M114 
Add whitespace to M114 output
 2014-02-17 18:07:47 +00:00
Marco
cf5c3b6610 Added dutch to language.h 2014-02-17 17:00:50 +01:00
Gabe Rosenhouse
d1c64b9dc4 Fix syntax error introduced in 477b6fa1d 2014-02-17 07:56:19 -08:00
Cylindric
5d50819791 Various typo fixes - only in comments, no code changes. 2014-02-17 13:04:44 +00:00
nothinman
3f455889d0 Merge pull request #769 from Cylindric3D/typofixes_1 
Various typo fixes - only in comments, no code changes.
 2014-02-17 11:30:01 +00:00
nothinman
4ddedb3b27 Merge pull request #780 from Cylindric3D/typofixes_2 
Various typo fixes #2 - only in comments, no code changes.
 2014-02-17 11:29:18 +00:00
nothinman
d4ba23bc28 Merge pull request #770 from josefpavlik/Marlin_v1 
Marlin v1
 2014-02-17 11:27:05 +00:00
nothinman
bbb424bd2f Merge pull request #779 from MissionSt/makefile-fix-abl 
Makefile fixes
 2014-02-17 11:22:34 +00:00
Cylindric
8f0cee2a14 Various typo fixes - only in comments, no code changes. 2014-02-17 10:58:36 +00:00
Cylindric
08263ae66e Merge branch 'Marlin_v1' into typofixes_1 2014-02-17 10:28:20 +00:00
Gabe Rosenhouse
5bd09d26e2 Makefile works with auto bed leveling 2014-02-16 23:23:29 -08:00
Gabe Rosenhouse
b45beeffd6 typo fix in Makefile 2014-02-16 23:23:29 -08:00
Paul Telford
306588925d Add whitespace to M114 output 2014-02-16 21:01:19 -08:00
whosawhatsis
c43838bb1e disable auto retract by default 
This should make it safe to enable FWRETRACT by default, with
autoretract (which should now be fixed) only enabled by M209. FWRETRACT
should probably now default to enabled (to make G10/G11 and M207-209
available, without changing functionality when they are not used), but
I’ll save that for another pull request/discussion.
 2014-02-16 19:04:54 -08:00
whosawhatsis
99f0e44864 Move FWRETRACT defaults to configuration_adv.h 2014-02-16 19:00:28 -08:00
whosawhatsis
66e3869138 Fix autoretract 
This takes the (now working) G10/G11 code and moves it to a function,
which is called by G10 and G11, and also called by G1 if autoretract is
enabled and a retract/recover move is detected.
 2014-02-16 18:59:04 -08:00
whosawhatsis
2f2459c0db Fix G10/G11 Z-lift 2014-02-16 18:15:34 -08:00
Gabe Rosenhouse
8c5675c290 Use language.h instead of English literals for "bed" 2014-02-16 17:16:00 -08:00
Gabe Rosenhouse
0f7393a13e Refactor 'accurate' auto bed leveling to use probe_pt() 2014-02-16 10:44:15 -08:00
Gabe Rosenhouse
c4fbb44d6d Refactor 3-point auto bed leveling to use probe_pt() 2014-02-16 10:44:08 -08:00
Gabe Rosenhouse
ad2c6488c7 Add probe_pt(), useful for auto bed leveling 2014-02-16 10:38:29 -08:00
Peter
c9c83a4560 Updated gen3+ board pins names to current convention 2014-02-16 00:47:06 +13:00
Mark Hanford
ab0d3c4fb3 Various typo fixes - only in comments, no code changes. 2014-02-14 11:48:24 +00:00
Josef Pavlik
477b6fa1df move engaged from lcd console refreshes power off timeout 2014-02-14 12:37:21 +01:00
Josef Pavlik
831fc2a952 Pt100 and Pt1000 temperature sensors handling 2014-02-14 12:26:27 +01:00
nothinman
7dcd350941 A few changes to Russian, changed LCD strings to be <=17 characters. 2014-02-13 11:58:14 +00:00
daid
c31bb2b7ad Only show the ZProbe offset when auto-bed-leveling is enabled. 2014-02-13 11:48:55 +01:00
daid
46f5bea19f Add configurable beep for UltiPanel. 2014-02-13 11:17:33 +01:00
daid
d16a770855 Ultimainboard 2.x does not has a PS_ON pin. 2014-02-13 10:57:03 +01:00
daid
71bb3a8133 Add comments for Ultimainboard 2.0 configuration. 2014-02-13 10:53:46 +01:00
daid
9b7d87e885 Remove duplicate contrast define. 2014-02-13 10:50:17 +01:00
daid
816f0a678a Merge pull request #768 from whosawhatsis/Marlin_v1 
multiple FWretract fixes
 2014-02-13 09:14:57 +01:00
whosawhatsis
6e43398509 G10/G11 bugfixes 
Previous version was broken by using G92 E0 between retract and recover.
 2014-02-12 13:03:00 -08:00
whosawhatsis
d6c5c503d4 correct feedrate units in comments for M207/M208 2014-02-12 13:02:47 -08:00
nothinman
15d6116188 Merge pull request #689 from cajun-rat/tidy 
Use C++ initialization list
 2014-02-12 16:38:11 +00:00
Martin Lukasik
0b9ecf3824 Language cleanup, part 1. 2014-02-12 13:21:26 +00:00
whosawhatsis
b5ba5c1465 Merge branch 'Marlin_v1' of https://github.com/whosawhatsis/Marlin into Marlin_v1 2014-02-11 19:06:03 -08:00
whosawhatsis
78e7654601 Keep FWRETRACT values in terms of millimeters when using M200 
for volumetric E units
 2014-02-11 19:05:35 -08:00
whosawhatsis
3f6d44d40b Keep FWRETRACT values in terms of millimeters when using M200 for volumetric E units 2014-02-11 18:50:11 -08:00
Cylindric
363dc2f0e8 Merge branch 'Marlin_v1' into update_menu_plan 2014-02-12 00:51:16 +00:00
nothinman
5f797ca29f Updated Polish, changed default firmware URL to Marlin. 2014-02-11 22:38:01 +00:00
Mark Hanford
0778f5f028 Add missing entries to the new Aragonian language. 2014-02-11 14:40:53 +00:00
Mark Hanford
54bab3e0d0 Merge branch 'Marlin_v1' into localisation 
Conflicts:
	Marlin/language.h
 2014-02-11 14:35:28 +00:00
Mark Hanford
bdd0211aeb Move strings in ultralcd.cpp into language.h. 2014-02-11 13:54:43 +00:00
Daniel Martinez
c8e5a82d49 keep English as default lang. 2014-02-09 18:24:24 +01:00
Daniel Martinez
f64592e362 Add Aragonese translation 2014-02-09 18:19:37 +01:00
ErikZalm
ac74f45dc0 Merge pull request #752 from MatixYo/patch-3 
Update language.h
 2014-02-09 17:52:26 +01:00
MatixYo
36086d3ca4 Update language.h 
Updated Polish translations.
 2014-02-07 19:15:51 +01:00
Cylindric
1781031f2d Update LCD Menu Tree with current options, based on ultralcd.cpp and language.h. 2014-02-07 01:52:44 +00:00
Jim Morris
d485988bec fix typo 2014-02-05 14:39:45 -08:00
Jim Morris
8a1fd25363 Default is to not define digipot_i2c 2014-02-05 14:28:23 -08:00
Jim Morris
5097c57d3a Added pins for Azteeg X3 Pro under motherboard 68 2014-02-05 14:25:42 -08:00
Jim Morris
b819fc53ca Add Azteeg X3 Pro as motherboard 68 
Add digipot i2c control for MCP4451
Allow M907 to set i2c digipot currents in amps
Fix Makefile to allow Azteeg motherboards
Fix Makefile to allow Wire libraries only
Add beeper pin for Azteeg X3 Pro
 2014-02-05 01:47:12 -08:00
ErikZalm
e1ae7952eb Merge pull request #743 from Opticalworm/Marlin_v1 
Improved support for panelolu2 encoder and buzzer
 2014-02-03 12:33:10 -08:00
David Forrest
a5f53f0cf3 Heater wattage reporting for M105 using EXTRUDER_WATTS and BED_WATTS 2014-02-03 14:50:28 -05:00
Ronald
8d162e5bd7 Improved support for panelolu2 encoder and buzzer 
I added #define for LCD_FEEDBACK_FREQUENCY_HZ and
LCD_FEEDBACK_FREQUENCY_DURATION_MS  which is used to alter the default
buzzer sound.

When selecting Panelolu2 in configuration.h:
- it automatically sets the correct ENCODER_PULSES_PER_STEP and
ENCODER_STEPS_PER_MENU_ITEM.
- if LCD_USE_I2C_BUZZER is defined it will also set the default
LCD_FEEDBACK_FREQUENCY_HZ and LCD_FEEDBACK_FREQUENCY_DURATION_MS

When selecting the sanguinololu 1284p the following is true:
- its now enables  LARGE_FLASH
- It enables the gcode M300 when the panelolu2 LCD_USE_I2C_BUZZER is
defined
 2014-02-03 07:45:03 +00:00
whosawhatsis
b2c11ba980 Change diameter code to 'D' 
For some reason that I can’t figure out, the decimal is dropped when
using ’S’ for the code.

Also some minor code improvements to M200.
 2014-02-01 18:49:25 -08:00
ErikZalm
61059385a3 Merge pull request #737 from whosawhatsis/M200 
M200 implementation
 2014-02-01 10:37:49 -08:00
whosawhatsis
856edfcc0d Fixed math 
This is why I wanted to sleep on the code I wrote while falling asleep
rather than immediately submitting a pull request.
 2014-01-31 08:43:11 -08:00
ErikZalm
0d81ae77bc Merge pull request #727 from drf5n/oversampling 
temperature.cpp: Actually use OVERSAMPLENR in the oversampling calculation.
 2014-01-31 07:09:10 -08:00
ErikZalm
84df13f7d1 Merge pull request #721 from drf5n/lcdOnly 
Enable basic ULTRA_LCD screen w/o encoders and menus.
 2014-01-31 07:07:12 -08:00
ErikZalm
4c7e9502ad Merge pull request #718 from drf5n/temptableRes 
createTemperatureLookupMarlin.py: Add resolution comments and format for...
 2014-01-31 07:06:02 -08:00
ErikZalm
652a0f6b5a Merge pull request #717 from drf5n/tpins2 
fastio.h: Add AT90USBxx_TEENSYPP_ASSIGNMENTS for teensyduino/Lincomatic/...
 2014-01-31 07:05:20 -08:00
ErikZalm
96a0cdc541 Merge pull request #716 from drf5n/maketeensy 
Makefile: Update for Arduino 1.0.5 and Teensyduino dependent boards (HAR...
 2014-01-31 07:04:29 -08:00
whosawhatsis
d24df7af2c M200 implementation 2014-01-31 00:54:19 -08:00
David Forrest
f0b8d5ba3d createTemperatureLookupMarlin.py: Change comment to refer to actual program name. 2014-01-29 23:34:22 -05:00
David Forrest
50f44d9249 createTemperatureLookupMarlin.py: Truncate to short after application of OVERSAMPLENR for improved resolution. 2014-01-29 23:24:07 -05:00
David Forrest
f5b5dd8038 createTemperatureLookupMarlin.py: Add output of Steinhart-Hart coefficients. 2014-01-29 22:59:47 -05:00
David Forrest
76cf07c3f7 Configuration.h: Use OVERSAMPLENR in dT_PID definition. 2014-01-21 23:25:51 -05:00
David Forrest
476c7193d8 temperature.cpp: Use OVERSAMPLENR in oversampling calculation. 2014-01-21 16:49:03 -05:00
whosawhatsis
f08bb8bb6a Previous commit borked. 2014-01-19 22:06:45 -08:00
whosawhatsis
b1f8f492c6 Remove previous_millis_cmd update from extruder runout prevention code 
This seems to defeat the purpose of previous_millis_cmd, preventing the
time elapsed from previous_millis_cmd from ever reaching
max_inactive_time or stepper_inactive_time while the heat was on.
 2014-01-19 19:22:08 -08:00
whosawhatsis
8a5eaa3c9b Fix crash after home bug 
Fixes a bug in the Extruder Runout Prevention feature that caused the
extruder to move back to “current_position” after a move if it was
activated while the move was in progress. For long home moves (which
are longer than the dimensions of the machine’s working area), this
would cause the machine to crash into the far end of its travel after
homing. This usually occurred on the Z axis, which could result in
damage to the machine if you don’t hit the reset button in time.
 2014-01-19 19:11:51 -08:00
David Forrest
61a7256d42 Enable basic ULTRA_LCD screen w/o encoders and menus. 2014-01-17 17:00:47 -05:00
l.lefebvre
fdac8f6cec Update ConfigurationStore.cpp 
Unable to compile if ENABLE_AUTO_BED_LEVELING is not set (not set by default).
 2014-01-17 16:09:58 +01:00
Alex Borro
05932e4458 Add Z Probe Offset to EEPROM and Ultra LCD 2014-01-16 18:13:46 -02:00
David Forrest
7216583b8b createTemperatureLookupMarlin.py: Add resolution comments and format for Marlin. 2014-01-16 12:40:15 -05:00
David Forrest
e8e0697e48 fastio.h: Add AT90USBxx_TEENSYPP_ASSIGNMENTS for teensyduino/Lincomatic/Printrboard compatibility. 2014-01-16 11:23:29 -05:00
David Forrest
75f39fadfc Makefile: Update for Arduino 1.0.5 and Teensyduino dependent boards (HARDWARE_MOTHERBOARD=={8,81,82,83,84}) 2014-01-16 10:58:35 -05:00
daid
df194f75e1 Added PT100 support for Ultiboard2 2014-01-06 11:20:03 +01:00
daid
380144c20f Add Ultiboard2 electronics. With PWM current settings. For the few people that have this new board as experiment in their UM-Original. 2014-01-06 11:05:02 +01:00
fsantini
6ae7f7870d Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into ErikZalm 
Conflicts:
	Marlin/Configuration.h
	Marlin/Marlin_main.cpp
 2013-12-23 12:20:32 +01:00
Phil Wise
17d6d965dc Use C++ initialization list 
This is the recommended approach for object initialization. The change
doesn't affect binary size (although in theory it could make it smaller).
 2013-12-19 21:21:46 +00:00
Joseivaldo Benito Junior
ce8b9c4fc5 Correct missing parameter from last upmerge 
Signed-off-by: Joseivaldo Benito Junior <jrbenito@benito.qsl.br>
 2013-12-19 00:50:44 -02:00
Joseivaldo Benito Junior
8e48e24c7f Update Delta example files 
Signed-off-by: Joseivaldo Benito Junior <jrbenito@benito.qsl.br>
 2013-12-18 00:04:36 -02:00
ErikZalm
46d2443c7d Merge pull request #676 from IVI053/Marlin_v1 
Minor improvements for encoder configuration, LCD entry for PSU controll and thermistor pins on RAMPS
 2013-12-17 02:28:28 -08:00
-
eed053dffb Revert "Made numbering of heat bed thermistor more logical as D8 is bed, D9 is Extruder 2 and D10 is Extruder 1, so T0 should be E1, T1 E1 and T2 bed to be sequential as MOSFET-Outputs" 
This reverts commit b7eadb9f37.
 2013-12-16 12:22:06 +01:00
Erik van der Zalm
8349fc89a4 Fixed planner bug 2013-12-16 11:40:23 +01:00
Francesco Santini
da2a6f9a31 Accurate bed leveling: x loop inside y and zigzag motion 2013-12-13 10:31:19 +01:00
RicardoGA
d29615dc0c Z and Y dual stepper drivers error 
if you try to enable Z_DUAL_STEPPER_DRIVERS the error "You cannot have dual drivers for both Y and Z" shows even if you don't have defined Y_DUAL_STEPPER_DRIVERS and don't let you compile the firmware

to solve this problem i change this line:

#ifdef Z_DUAL_STEPPER_DRIVERS && Y_DUAL_STEPPER_DRIVERS

to:

#if defined (Z_DUAL_STEPPER_DRIVERS) && defined (Y_DUAL_STEPPER_DRIVERS)

now the error only show if you define both Z_DUAL_STEPPER_DRIVERS and Y_DUAL_STEPPER_DRIVERS
 2013-12-11 14:37:43 -06:00
fsantini
5bde7fcb28 Minor code and comment polishing 2013-12-11 21:27:43 +01:00
-
20faff5935 Incorporate PS_DEFAULT_OFF for starting state on LCD menu entry 2013-12-08 21:35:57 +01:00
-
e5d3044801 Added posibility to set ENCODER_STEPS_PER_MENU_ITEM in Configuration.h like ENCODER_PULSES_PER_STEP as it depends on it for usability 2013-12-08 21:34:56 +01:00
-
b7eadb9f37 Made numbering of heat bed thermistor more logical as D8 is bed, D9 is Extruder 2 and D10 is Extruder 1, so T0 should be E1, T1 E1 and T2 bed to be sequential as MOSFET-Outputs 2013-12-08 21:30:42 +01:00
Michal Dyntar
e8786bf110 Added support for Cheaptronic v1 electronic 2013-12-07 13:29:47 +01:00
fsantini
cc2925b705 Implemented a least squares fit of the bed equation for auto bed leveling. 
The code for the LSQ solver (qr_solve) is copyrighted by John Burkardt and released under LGPL here:
http://people.sc.fsu.edu/~%20jburkardt/c_src/qr_solve/qr_solve.html
(see qr_solve.cpp for further copyright information)
 2013-12-06 21:46:25 +01:00
fsantini
b64661070e Fixed the plane vector equation to a simpler one (only dependent on the normal) 
Removed the calculation of the inverse matrix since the rotation matrix is orthogonal, therefore inverted == transposed.
Much simpler and mathematically robust.
 2013-12-06 21:32:21 +01:00
Alex Borro
5c44f6c434 Bed Heater monitoring in Controller Fan 
In some cases the Bed Heater FET heats up more then stepper drivers, so
this change add the bed monitoring to the controller fan. As soon as the
bed heater is turned on, the controller fan will run as well.
 2013-11-27 23:23:06 -02:00
Alex Borro
b33375d438 Z Axis Safe Homing when using Z Probe 
Recommended for those who are using the Z Probe for Z Homing (as
Z-Endstop)

This feature has two changes:

1) Allow user to choose where the Z Probe will touch the bed when homing
all axis together (G28) by setting below defines:

Z_SAFE_HOMING_X_POINT
Z_SAFE_HOMING_Y_POINT

2) Prevents the user to perform Z Axis Homing when the Z Probe is
outsite bed.
 2013-11-27 22:37:35 -02:00
Alex Borro
35905ea4f9 Allow heaters to stay full On when PWM=127 
In previous version, even with PWM = 127, the system turns the FET off
and then on in the next cycle. This bevavior may increase the FET heat
dissipation.
It was fixed keeping the FET always On when PWM=127.
 2013-11-27 18:13:38 -02:00
Erik van der Zalm
a94e588765 Changed slow buttons behavior. 2013-11-17 17:41:30 +01:00
Erik van der Zalm
69af392554 Added HEATERS_PARALLEL (Request from reifsnyderb) 
This allows a hot end with two heaters and a FET for each heater. This is useful if the FET is not capable of heating two heaters.
 2013-11-17 13:29:02 +01:00
Erik van der Zalm
48a185d004 Fixed compile errors from bad commits. 2013-11-10 16:36:37 +01:00
ErikZalm
24d1f480b6 Merge pull request #647 from shaggythesheep/newfeature-M226 
Implement M226 - GCode Initiated Pause
 2013-11-10 07:27:01 -08:00
ErikZalm
95b41413e6 Merge pull request #641 from hugokernel/master 
M80 - ATX Power On related modification
 2013-11-10 07:26:35 -08:00
ErikZalm
59b96e323e Merge pull request #640 from fmalpartida/SAV-MkI 
Added support for BT on AT90USB devices, corrected LCD bug, added new board and LCD
 2013-11-10 07:26:08 -08:00
ErikZalm
2433ee6fc8 Merge pull request #637 from justuswilhelm/Marlin_v1 
Fix servo control for Melzi v2.0
 2013-11-10 07:22:12 -08:00
ErikZalm
3455a2bac2 Merge pull request #636 from PrintToPeer/Marlin_v1 
Add UUID support to M115 responses.
 2013-11-10 07:21:46 -08:00
Richard Miles
dc887ef99b Implement M226 - GCode Initiated Pause 
Implemented M226 as described here:
http://reprap.org/wiki/G-code#M226:_Gcode_Initiated_Pause

Waits for pin to be become either HIGH, LOW or the inverse of what it
was before. Allows printing to pause until user interaction
 2013-11-09 15:11:58 +00:00
Charles R
c244eb860c If you have a switch on suicide pin, this is useful if you want to 
start another print with suicide feature after a print without
suicide...
 2013-11-04 12:04:04 +01:00
fmalpartida
7b556d2e96 Added BT support on AT90USB devices 
Added AT90USB device BT connectivity support using second UART.
 2013-11-03 19:57:06 +01:00
Kaz Walker
a5e8575829 Add UUID support to M115 responses. 2013-11-01 14:51:50 -06:00
Daniel Benamy
cab84e0e5b Add (correct) missing pin definitions for Y2 
I tested this and it works.
 2013-10-30 22:44:20 -04:00
fmalpartida
5b3f60ea2e Corrected LCD only error 
If only an LCD is defined and no menu or keyboard defined, there is a
compilation error.

Added conditional compilation.
 2013-10-30 21:52:46 +01:00
Justus Perlwitz
62d0b79023 Fix servo control for Melzi 2013-10-30 20:59:58 +01:00
fmalpartida
b5a964fcc5 Initial SAV MkI (RepRap CloneWars board) integration. 
Included support for BT dongle on AT90USB boards.
Added LCD Shift Register LCD control
Included support for RepRap Clone Wars project board (SAV MKI).
 2013-10-30 11:45:32 +01:00
dumle29
f941203172 PS_ON configurable boot state 
Allows the user to select wheter or not the PSU should be turned on or
kept in standby when marlin boots
 2013-10-29 18:44:56 +01:00
whosawhatsis
c79e3967b3 Make G11 not horribly broken 2013-10-24 18:58:42 -07:00
bkubicek
d69822ed51 Fix '#' 
since it can occure in comments.
 2013-10-22 10:34:51 +02:00
bkubicek
2fb2a0a119 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2013-10-22 10:08:21 +02:00
bkubicek
39d88bcccb preparation for hibernation 
If a print is stopped, it would be nice in the future to write a file with the printer state, the filename of the print, and the position within the print.
this file could be read, to continue a previously stopped print.
not finished yet.
 2013-10-22 10:04:08 +02:00
bkubicek
ab965376ff Sub-file calls. 
by overloading M32 it is now possible to execute gcode files from other gcode files, with a fixed recursion level.
This can be used e.g. for having a real start.g and end.g somewhere on the sd card, which are then called from the normal print file.
Another usecase would be to have macro-files for nozzle-change and layerchange.
I have not tested the speedwise performance. The testing was done with pronterface.

syntax:
normal call from sd card will open the new file and continue executing there.
M32 !/path/filename#
this however will call the new file and return to the caller file.
M32 P !/path/filename#
with the optional "S<position>" the  file starting position can be set.
this is for continuing prints from a previous location.
 2013-10-22 10:02:18 +02:00
bkubicek
b2cc27e5ea Added a magic character for sd buffering. 
if a '#' is read now the buffer will be emptied before reading ahead.
This is so one can execute files from within gcode files, without messing the buffer with preread characters from the caller file.
# can not occure in sd files imho, because it should only occure within checksums in ther serial communication.
Yes, thats a lame argument. If you have a better idea please tell me. It has to be a character that one can type
on a keyboard manually.
 2013-10-22 09:54:13 +02:00
Erik van der Zalm
8a08cca0f2 Added temperature status less. 
Hopefully fixed viky button handling without braking other boards
 2013-10-20 12:12:35 +02:00
Erik van der Zalm
667d278f54 Revert "Fix for Viki display" 
This reverts commit 314fd13c39.
 2013-10-20 10:16:46 +02:00
Erik van der Zalm
bf27e79e74 Small BlinkM fix 2013-10-20 10:06:02 +02:00
Erik van der Zalm
87e28c0599 Added ifdefs to blinkm 2013-10-20 09:55:15 +02:00
Erik van der Zalm
24c6b2ab35 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2013-10-20 09:51:58 +02:00
ErikZalm
6a803ba9c5 Merge pull request #590 from timkoster/Marlin_v1 
Added BlinkM support over i2c
 2013-10-20 00:51:35 -07:00
Erik van der Zalm
457d8a0acb Fixed merge conflicts 2013-10-20 09:50:27 +02:00
Alex Borro
6f85a8c7aa Bed auto Leveling change: Raise Z before homing 
- Added "Z_RAISE_BEFORE_HOMING" for raising Z the defined distance
before homing. This is useful to avoid Z-Probe collision when hotend is
near bed.

- Fixed the issue of Z not going bellow Z_PROBE_OFFSET when
"min_software_endstops" is true.
Now the Z_PROBE_OFFSET is not set in Z_MIN_POS, it is added after
homing.
 2013-10-12 17:28:11 -03:00
Alex Borro
dd3086d3f2 Show Temperature ADC values 
If "SHOW_TEMP_ADC_VALUES" is defined in Configuration_adv.h, the M105
command will present, after tradicional temperatures, the ADC value read
from temp sensors. This is great for adjusting thermistor tables with
thermocouple.

From Pronterface you can see the ADC value and compare with a
thermocouple reading.. then you just need to create your own thermistor
table.

Since this merge doesnt change the original information, it doesnt mess
with PC software parsing (tested under Pronterface and Repetier-Host).
 2013-10-12 10:41:23 -03:00
bkubicek
7fad13a1e2 Reverse SD card file name order. 
This is _not_ automatically the cronological, since deleting a file will free
the filesystem descriptor for it, which then will be used by the next file copied on it.
Since this makes the auto0.g file very inaccessible, I put the option back, to have it in the prepare menu.

this should satisfy https://github.com/ErikZalm/Marlin/pull/373

as a reminder, auto0.g will be executed every time after a boot with sd card present and file present.
thereafter, if there is a file auto1.g this will be done. Thats IMHO the best place to put settings, and prepare heating.
I also execute again after each (now again via the prepare menu) before starting a new print/ after a failed one.
It for me 100% replaces any start.gcode form the slicers.
 2013-10-12 13:24:55 +02:00
bkubicek
b832f5b9f6 added delta tower babystepping. Its untested, but hopefully florian horsch will be able to try. 
also, removed some trouble for compilation with corexy.
I think that babystepping is only possible in z for a delta tower.
not sure if it would be usefull to step individual motors on a delta, i don't own one
 2013-10-07 09:14:04 +02:00
bkubicek
c38b0855c8 I think that filament change is ready for the masses. I have tested very often with my ultimaker. 
I strongly vote for it being a single gcode, because otherwise the triggering from the menu is terrible.
 2013-10-06 21:20:26 +02:00
bkubicek
d147a057ac Add the socalled "Babystepping" feature. 
It is a realtime control over the head position via the LCD menu system that works _while_ printing.
Using it, one can e.g. tune the z-position in realtime, while printing the first layer.
Also, lost steps can be manually added/removed, but thats not the prime feature.
Stuff is placed into the Tune->Babystep *

It is not possible to have realtime control via gcode sending due to the buffering, so I did not include a gcode yet. However, it could be added, but it movements will not be realtime then.

Historically, a very similar thing was implemented for the "Kaamermaker" project, while Joris was babysitting his offspring, hence the name.

say goodby to fuddling around with the z-axis.
 2013-10-06 21:14:51 +02:00
Erik van der Zalm
bca353cc12 Fixed duplicate define in fastio.h 2013-10-03 19:24:53 +02:00
Alex Borro
253dfc4bc1 Bed Auto Leveling feature 
Check the Readme for instruction how to enable and configure the feature
 2013-09-29 13:20:06 -03:00
ErikZalm
1bda6bf862 Merge pull request #609 from phq1910/patch-1 
Update Configuration.h
 2013-09-26 11:47:58 -07:00
ErikZalm
c80aac1518 Merge pull request #610 from phq1910/patch-2 
Update pins.h
 2013-09-26 11:47:47 -07:00
Erik van der Zalm
314fd13c39 Fix for Viki display 2013-09-26 20:32:19 +02:00
phq1910
4f7c6dfe35 Update pins.h 
Include Pins cpu Sethi 3D
 2013-09-26 11:40:54 -03:00
phq1910
57173739a1 Update Configuration.h 
Include CPU Sethi 3D
 2013-09-26 11:29:44 -03:00
Erik van der Zalm
0dca49a7c0 Added Azteeg X3 board. 2013-09-24 17:31:16 +02:00
Erik van der Zalm
d8c2c810b4 Added info to the delta configuration files in the configuration.h file 2013-09-23 23:29:46 +02:00
Erik van der Zalm
9bc88f8bab Placed optional ENCODER_PULSES_PER_STEP in the configuration.h file 2013-09-23 23:25:11 +02:00
Erik van der Zalm
3ca1ca6869 Fixed missing ENCODER_PULSES_PER_STEP 2013-09-23 23:18:35 +02:00
Tim Koster
97b0da0c2e Removed #ifndef BLINKM 2013-09-22 10:43:27 +03:00
Tim Koster
61db046b32 Added #ifdef BLINKM around new code. Also refined BlinkM.h. 2013-09-20 10:57:42 +03:00
Richard Miles
77df2ab0e7 Make Y_DUAL_STEPPER_DRIVERS disabled by default 2013-09-17 21:49:44 +01:00
Richard Miles
ed1ab42186 Added Y_DUAL_STEPPER_DRIVERS 
Enables two stepper drivers to be used for the Y axis (useful for
Shapeoko style machines)
Each Y driver can be stepped in either the same way or in opposite
directions, accounting for different hardware setups (leadscrew vs. belt
driven)
 2013-09-17 19:19:20 +01:00
Richard Miles
f4a59e4ce5 Revert "Added Y_DUAL_STEPPER_DRIVERS" 
This reverts commit 7ee275b620.
 2013-09-17 19:05:49 +01:00
Richard Miles
7ee275b620 Added Y_DUAL_STEPPER_DRIVERS 
Enables two stepper drivers to be used for the Y axis (useful for
Shapeoko style machines)
Each Y driver can be stepped either the same way or in opposite
directions, accounting for different hardware setups (leadscrew vs. belt
driven)
 2013-09-17 19:02:00 +01:00
ErikZalm
6a1e980c6d Merge pull request #600 from xoan/Encoder_Pulses_Per_Step 
add ENCODER_PULSES_PER_STEP
 2013-09-14 04:56:45 -07:00
ErikZalm
20076a8bd3 Merge pull request #598 from GDV0/Marlin_v1 
FIx compilation error when enabling SERVO_ENDSTOPS (#591)
 2013-09-14 04:54:19 -07:00
Erik van der Zalm
3626b5ad8b Removed Delta from the default config file. 
Changed EEPROM CHITCHAT behavior. M503 is always enabled.
 2013-09-14 13:50:09 +02:00
Xoan Sampaiño
bf7007d02f add ENCODER_PULSES_PER_STEP 2013-09-13 04:12:51 +02:00
GDV0
f17506c504 FIx compilation error when enabling SERVO_ENDSTOPS (#591) 2013-09-11 23:09:37 +02:00
Martin Lukasik
acd8619809 Fan fix for Panelolu2+Sanguinololu. 2013-09-10 22:10:58 +01:00
George Roberts
595580556c Fixed bug that makes ulticontroller knob backwards introduced Feb 28 2013 by Robert. 
Bug introduced in version 6beb42cdf6.
Robert did a good job of simplifying but messed up this chunk of code.

Looking at working version: 839bef6d5d
it seems there is no case where encrot3 should be defined as 2
because if ULTICONTROLLER is defined then NEWPANEL is also defined.
 2013-09-10 09:56:19 -04:00
Tim Koster
88dfeefca3 Define BlinkM default disabled 2013-09-10 12:32:21 +03:00
Tim Koster
5350faf2a2 Merge https://github.com/timkoster/MarlinBlinkM into Marlin_v1 2013-09-10 12:27:26 +03:00
Tim Koster
7016cc9511 Added BlinkM support over i2c 2013-09-10 12:18:29 +03:00
Tim Koster
3b315b3da0 Added BlinkM support over i2c 2013-09-06 22:25:39 +03:00
Jim Morris
f26f26b7bd Fix the example delta configuration as someone forgot to do it. 2013-09-05 16:36:55 -07:00
Peter Hercek
9aa2229077 add command M666 for adjusting delta printer endstop position 2013-08-28 01:15:20 +02:00
Robert F-C
9547fb9dfb Add duplication and auto-park mode for dual x-carriage support. 2013-08-08 00:10:26 +10:00
Steve Kelly
53614e5144 add pins for rambo lcd 2013-08-03 11:45:53 -05:00
Steve Kelly
b42d24e31e add additional pins to avr2560 for rambo lcd 2013-08-03 11:37:12 -05:00
Nicolas Rossi
b0c8120fcc Added feedrate setting in exemple config for manual moves from panel 2013-08-03 13:09:53 +02:00
Nicolas Rossi
a54fe2d73c Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin.git into Marlin_v1 
Conflicts:
	Marlin/Marlin_main.cpp
 2013-08-03 13:05:56 +02:00
ErikZalm
7ea63d08df Merge pull request #565 from iXce/avrdudeconfpath 
Detect OS in Makefile to use the correct avrdude.conf path
 2013-08-02 13:16:07 -07:00
ErikZalm
4187b637a5 Merge pull request #570 from hg42/separate-INVERTING-macros-for-MIN-and-MAX-endstops 
separate INVERTING for MIN and MAX endstops (6 #defines instead of 3)
 2013-08-02 13:15:30 -07:00
ErikZalm
07e7de3600 Merge pull request #569 from hg42/convert-PROTOCOL-macros-from-statements-to-expressions 
convert PROTOCOL macros from statements to (multiple, comma separated) expressions
 2013-08-02 13:13:29 -07:00
Guillaume Seguin
c0c4c97db6 Detect OS in Makefile to use the correct avrdude.conf path 2013-08-01 19:20:27 +02:00
hg42@gmx.net
2ca983568d separate INVERTING for MIN and MAX endstops (6 #defines instead of 3) 2013-08-01 15:06:39 +02:00
hg42@gmx.net
3700f688f5 convert PROTOCOL macros from statements to (multiple, comma separated) expressions 2013-08-01 14:56:39 +02:00
daid
a504c88346 Fix a bug where the PID controllers D action kicks in hard as soon as the PID controller starts. 2013-08-01 14:12:30 +02:00
Nicolas Rossi
394ed08f88 Added feedrate setting for manual moves from panel 2013-07-30 14:33:30 +02:00
Nicolas Rossi
9bf1cf1b22 Pre-calculate diagonal rod length squared 2013-07-30 14:09:21 +02:00
Nicolas Rossi
4623e78ce0 Added Honeywell thermistor 135-104LAF-J01 2013-07-30 14:02:18 +02:00
Brendan-csel
d7f384f680 Skip SD menu refresh if nothing has changed 2013-07-30 14:02:15 +02:00
Brendan-csel
abc8320a68 Save LCD_CLICKED before it is cleared 
The SD card menu was refreshing so slowly that the button interrupt was clearing LCD_CLICKED before the menu items could check it.
 2013-07-30 14:02:13 +02:00
Guillaume Seguin
f4c3135c6d Add Panelolu2 pins for RAMPS1.3 2013-07-30 14:02:11 +02:00
Guillaume Seguin
aae42c68f9 Update French translation in language.h 2013-07-30 14:02:08 +02:00
Guillaume Seguin
4d435c38a6 Add support of LiquidTWI2-based panels to Makefile 
Use LIQUID_TWI2=1 as make argument to enable this support
 2013-07-30 14:02:06 +02:00
Guillaume Seguin
6c42a3a339 Woops, fix logic 2013-07-30 14:02:04 +02:00
Guillaume Seguin
376d8af2c8 Report temperatures for all extruders 2013-07-30 14:02:01 +02:00
ErikZalm
434b6a05c1 Merge pull request #552 from iXce/Marlin_v1 
Report temperatures for all extruders in reply to M105
 2013-07-29 10:39:21 -07:00
ErikZalm
bdc2621119 Merge pull request #561 from Brendan-csel/Marlin_v1 
Fix for Viki LCD issues printing from SD card
 2013-07-29 10:38:17 -07:00
ErikZalm
6965bd4e15 Merge pull request #560 from njprossi/Marlin_v1 
Fixed move from panel for delta bot #557
 2013-07-29 10:37:40 -07:00
ErikZalm
a55b33e613 Merge pull request #559 from iXce/panelolupinsramps13 
Add Panelolu2 pins for RAMPS1.3
 2013-07-29 10:37:03 -07:00
ErikZalm
8b34351537 Merge pull request #558 from iXce/frenchupdate 
Update French translation in language.h
 2013-07-29 10:36:43 -07:00
ErikZalm
735e556724 Merge pull request #555 from iXce/liquidtwi2_makefile 
Add support of LiquidTWI2-based panels to Makefile
 2013-07-29 10:33:54 -07:00
Brendan-csel
d80aecda0a Skip SD menu refresh if nothing has changed 2013-07-29 21:00:29 +12:00
Brendan-csel
be2dea1dc6 Save LCD_CLICKED before it is cleared 
The SD card menu was refreshing so slowly that the button interrupt was clearing LCD_CLICKED before the menu items could check it.
 2013-07-29 20:58:09 +12:00
Nicolas Rossi
55c287a69e Fixed move from panel for delta bot #557 2013-07-28 22:54:37 +02:00
Guillaume Seguin
1902d339b0 Add Panelolu2 pins for RAMPS1.3 2013-07-28 19:19:57 +02:00
Guillaume Seguin
eb23a68e92 Update French translation in language.h 2013-07-28 18:50:47 +02:00
ErikZalm
1561c6df51 Merge pull request #547 from wolfmanjm/delta-configuration 
Setup Default configuration for Deltas if DELTA is defined
 2013-07-24 03:11:36 -07:00
Guillaume Seguin
374bc99fa3 Add support of LiquidTWI2-based panels to Makefile 
Use LIQUID_TWI2=1 as make argument to enable this support
 2013-07-24 12:09:53 +02:00
Jim Morris
ab624eac2a revert COnfiguratiuon to the same as head 2013-07-24 02:57:46 -07:00
Jim Morris
52f79ffeca add an example default configuration for delta style bots 2013-07-24 02:55:52 -07:00
Jim Morris
b9d7ccf1cd Merge remote-tracking branch 'upstream/Marlin_v1' into delta-configuration 
Conflicts:
	Marlin/Marlin_main.cpp
 2013-07-24 02:49:25 -07:00
Guillaume Seguin
d4d1540727 Use -fno-use-cxa-atexit to override gcc --enable-cxa_atexit 2013-07-24 11:19:38 +02:00
Guillaume Seguin
01ed99143c Woops, fix logic 2013-07-23 23:34:42 +02:00
Guillaume Seguin
76841450c8 Only display poweron/poweroff if PS_ON_PIN > -1 2013-07-23 22:28:30 +02:00
Guillaume Seguin
44f327d738 Uniformly reindent language.h 2013-07-23 22:13:40 +02:00
Guillaume Seguin
326d2db025 Update language.h so that all languages compile 
Some strings still need translation, but at least everything compiles.
 2013-07-23 22:11:54 +02:00
Guillaume Seguin
2cb716f513 Run Marlin/language.h through dos2unix 2013-07-23 21:49:37 +02:00
Guillaume Seguin
34da3a0a3f Merge github.com:ErikZalm/Marlin into Marlin_v1 
Conflicts:
	Marlin/language.h
 2013-07-23 21:46:41 +02:00
Guillaume Seguin
18199ff960 Merge github.com:ErikZalm/Marlin into Marlin_v1 2013-07-23 21:33:52 +02:00
Robert F-C
fb5334f428 Fixed compile error when QUICK_HOME is defined. 
As well a couple of minor changes to handling of extruder offset for
dual x-carriage mode.
 2013-07-22 22:46:14 +10:00
Robert F-C
c3568398b5 Disable DUAL_X_CARRIAGE by default 2013-07-20 23:50:30 +10:00
Robert F-C
39cd3dbdbe Remove dual x-carriage functionality that could/should be implemented in slicer 
Also added a couple of missed merge lines in homeaxis() from previous
commit.
 2013-07-20 13:07:50 +10:00
Jim Morris
fb20ceabce enable soft endstops for delta 
disable delta by default
 2013-07-17 16:21:51 -07:00
Jim Morris
d01ee7e7b5 fix zjerk being the same for delta as xy jerk 
add more delta defaults
on delta make second home even slower
 2013-07-17 16:14:07 -07:00
Robert F-C
d7390e13d9 Support dual x-carriage printers 
Dual x-carriage designs offer some substantial improvements for dual
extruder printing.
 2013-07-17 22:44:45 +10:00
Jim Morris
f3aa2a48e7 update max pos 2013-07-17 01:29:51 -07:00
Jim Morris
460751503e Added default configurations for deltas when DELTA is defined 2013-07-17 01:17:27 -07:00
Maik Stohn
9da94c247a fixed bad lcd commit from makr3d 
#elsif does not exist #elif is correct
 2013-07-15 17:34:21 +02:00
Erik van der Zalm
59004023fd Fixed typo 2013-07-15 17:22:56 +02:00
Erik van der Zalm
461dad6e05 Added : M32 - Select file and start SD print (Can be used when printing from SD card) 
Untested
 2013-07-14 22:39:59 +02:00
Erik van der Zalm
c4a2077951 M109 and M190 now wait when cooling down if R is used instead of S. 
M109 S180 waits only when heating.
M109 R180 also waits when cooling.
 2013-07-14 21:10:24 +02:00
ErikZalm
8a2a3ef91d Merge pull request #531 from iXce/Marlin_v1_lcd 
Only clamp panel movements if software endstops are enabled
 2013-07-14 06:50:23 -07:00
Erik van der Zalm
6397b3339c restored configuration.h defaults 2013-07-14 15:49:03 +02:00
Erik van der Zalm
cdaaad3df1 Merge branch 'Marlin_v1' of https://github.com/makr3d/Marlin into makr3d-Marlin_v1 2013-07-14 15:45:49 +02:00
Erik van der Zalm
e3bdefd873 fixed missing #endif 2013-07-14 15:42:53 +02:00
Erik van der Zalm
a5be0c52c6 no message 2013-07-14 15:35:54 +02:00
Michael Mayer
e509cdbeb0 added contrast control function for gLCDs 2013-07-14 15:28:26 +07:00
Michael Mayer
99b7e926e7 added MaKr3d Melzi board 2013-07-14 15:17:55 +07:00
Gabino Lopez
68be33b1fc Update language.h 
I update the spanish Messages, now this compile for spanish language.
 2013-07-04 10:23:00 +02:00
daid
acb3271c9a Merge pull request #534 from xifle/Marlin_v1 
Fixes compiler warning for feedrate deadzone
 2013-07-01 23:41:51 -07:00
xifle
61fe430d4f Should fix compiler warning for feedrate deadzone 2013-07-01 11:10:02 +02:00
Gord Christmas
fde17d5720 Fix for ugly code compilation errors in SERVO_ENDSTOP checks 2013-06-28 08:02:04 -07:00
Guillaume Seguin
aa65c20d1f Only clamp panel movements if software endstops are enabled 2013-06-28 14:18:00 +02:00
Erik van der Zalm
ecf3ab5de4 Added thermistor 60 to configuration.h 2013-06-27 23:25:51 +02:00
Nicolas Rossi
2daa85918e Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin.git into Marlin_v1 
Conflicts:
	Marlin/Configuration.h
	Marlin/Marlin_main.cpp
	Marlin/language.h
	Marlin/pins.h
	Marlin/ultralcd.cpp
 2013-06-20 23:59:56 +02:00
Erik van der Zalm
2015989f84 Added DISABLE_MIN_ENDSTOPS 2013-06-18 19:20:26 +02:00
Christian Inci
648d45cfb2 Fix Pin Description Typo 
Reverse 'Bed' and 'Fan' at the RAMPS 33 Description.

Signed-off-by: Christian Inci <chris.pcguy.inci@gmail.com>
 2013-06-16 23:35:33 +02:00
ErikZalm
171719f18c Merge pull request #525 from lajos/ultralcd_pid 
ultralcd.cpp compile errors when !defined(PIDTEMP)
 2013-06-16 00:02:54 -07:00
lajos
b519af4f05 fixed another !defined(PIDTEMP) compile in ultralcd.cpp 2013-06-15 20:49:18 -04:00
lajos
7d03c52511 fixed compile error in ultralcd.cpp when PIDTEMP undefined 2013-06-15 18:09:52 -04:00
lajos
02dee80fa5 added Azteeg X1 motherboard 2013-06-15 16:58:17 -04:00
Henrik Brix Andersen
47dc70e3ec Fix location of avrdude.conf 2013-06-15 09:50:25 +02:00
Henrik Brix Andersen
1d258903bb Allow command line compilation when using BEEPER. 2013-06-15 09:36:55 +02:00
Erik van der Zalm
e34c9981ab Delta disabled by default 2013-06-11 22:33:58 +02:00
Erik van der Zalm
26a441fc7d More 3Drag controller patches. 2013-06-10 18:26:15 +02:00
Erik van der Zalm
ac975ed8c2 Merge branch 'deltabot' into Marlin_v1 2013-06-10 18:20:29 +02:00
Jim Morris
caa848f943 fix homing for deltas 2013-06-09 21:10:00 -07:00
Erik van der Zalm
7ad12be763 Merge branch 'Marlin_v1' of https://github.com/codexmas/Marlin into codexmas-Marlin_v1 
Conflicts:
	Marlin/Configuration.h
	README.md
 2013-06-09 23:10:41 +02:00
Erik van der Zalm
408169aef4 Merge branch 'Marlin_v1' of https://github.com/BorisLandoni/Marlin into BorisLandoni-Marlin_v1 
Conflicts:
	Marlin/Configuration.h
	Marlin/language.h
	Marlin/pins.h
 2013-06-09 22:57:40 +02:00
Erik van der Zalm
bd96d22bfb Merge branch 'Marlin_v1' into thinkyhead 
Conflicts:
	Marlin/Configuration.h
	Marlin/Configuration_adv.h
	Marlin/Marlin.h
	Marlin/Marlin_main.cpp
	Marlin/Servo.cpp
	Marlin/language.h
	Marlin/pins.h
	Marlin/planner.cpp
	Marlin/ultralcd_implementation_hitachi_HD44780.h
	README.md
 2013-06-09 22:26:47 +02:00
Erik van der Zalm
73f21cd5d6 Spanish updated so far. 2013-06-09 21:40:35 +02:00
Erik van der Zalm
6f4a6e531c Merge branch 'deltabot' into Marlin_v1 2013-06-09 13:55:18 +02:00
Erik van der Zalm
01edf22a10 Fix home_all_axis to make QUICK_HOME work with Repetier-Host which sends G28 X0 Y0 Z0 instead of G28. Thanks to Matt Schoenholz for reporting this issue. 2013-06-09 13:54:19 +02:00
Erik van der Zalm
ff6fa09ecf Moved corexy implementation from stepper to planner 
(Thanks iquizzle)
 2013-06-09 13:10:06 +02:00
Erik van der Zalm
c8dcc7c208 Allow increasing the software PWM frequency. 2013-06-09 12:52:49 +02:00
Erik van der Zalm
8b0d82e9db Removed "awaiting translation" for french 2013-06-09 12:24:06 +02:00
Erik van der Zalm
1e05d192ab Make the beep tone less offensive 2013-06-09 12:21:16 +02:00
Erik van der Zalm
373f3ecab3 Merge branch 'deltabot' of https://github.com/jcrocholl/Marlin into deltabot 
Conflicts:
	Marlin/Configuration.h
	Marlin/Marlin_main.cpp
	Marlin/pins.h
 2013-06-09 00:51:58 +02:00
kiyoshigawa
f295712008 Trying to fix weird diff on ultralcd_implementation_hitachi_HD44780.h 2013-06-08 09:27:56 -06:00
kiyoshigawa
69b02031ca Fixed small error in lcd define statements. 2013-06-08 09:09:11 -06:00
kiyoshigawa
6a81291c57 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 
This should fix issues with pull request 467, I hope.

Conflicts:
	Marlin/Configuration.h
	Marlin/Marlin.pde
	Marlin/ultralcd_implementation_hitachi_HD44780.h
 2013-06-08 08:48:18 -06:00
BorisLandoni
c1cb5977ee Update Configuration.h 2013-06-08 14:37:39 +02:00
BorisLandoni
8a5bd8a808 Update Configuration.h 2013-06-08 14:37:17 +02:00
BorisLandoni
c1d7cf939e Update language.h 2013-06-07 17:38:17 +02:00
BorisLandoni
4c7d1436e9 Update pins.h 2013-06-07 18:37:44 +03:00
BorisLandoni
6588933c04 Update Configuration.h 2013-06-07 18:36:16 +03:00
Scott Lahteine
5dabc95409 Apply all changes from latest Marlin_V1 
Diffed and merged, preserving my updates
 2013-06-06 15:49:25 -07:00
Gord Christmas
a733537ddd Missed some variable declarations 
Integrated fixes from henrikbrixandersen pull request #504
 2013-06-06 09:18:03 -07:00
Gord Christmas
f4f30c9d64 Added servo actuated enstop coding to allow G28 command to engage and retract a servo to specified angles. 2013-06-06 07:36:52 -07:00
Erik van der Zalm
79374f0b93 Merge branch 'reisnyderb' of https://github.com/ErikZalm/Marlin into Marlin_v1 2013-06-05 17:44:48 +02:00
Maik Stohn
da05b3ba94 faster GLCD (ST7920 SW-SPI) implementation / fixes 
- fixed long menu entries (>14 or >18 chars) caused overrun in dogm lcd
implementation
- fixed pin set problem when in interrupt
- much faster ST7920 SW-SPI implementation
- increased ST7920 framebuffer size for more speed
 2013-06-05 16:27:44 +02:00
kiyoshigawa
4b19c8552e Fixing changed Configuration.h settings to be default values per ErikZalm Request. 2013-06-04 12:01:55 -06:00
Erik van der Zalm
971ec35135 Expanded M302 to allow setting the temp 2013-06-02 17:36:23 +02:00
Erik van der Zalm
5090c56651 More redundant temp sensor changes. (After testing and debugging by reifsnderb) 2013-05-29 19:29:30 +02:00
Guillaume Seguin
16b9239a26 Report temperatures for all extruders 2013-05-29 18:06:12 +02:00
ErikZalm
a964b3cf3d Merge pull request #495 from Gatulibu/Marlin_v1 
Added support for Megatronics v2.0 and Minitronics v1.0
 2013-05-28 07:51:49 -07:00
Maik Stohn
e8572c5239 Fix: Long menu entries (>14 or >18 chars) caused overrun in hitachi display implementation 2013-05-28 15:53:07 +02:00
Maik Stohn
7ee70c2248 Fix: removed wrong ; at end of define 2013-05-28 15:50:48 +02:00
Gatulibu
b78fa6bb70 Added support for Megatronics v2.0 and Minitronics v1.0 
merged from code downloaded from reprapworld.com
 2013-05-28 14:03:31 +02:00
Erik van der Zalm
9be61cdc02 Added redundant temp sensor 2013-05-26 17:57:49 +02:00
Erik van der Zalm
7231a20dba Put #ifdef around servo pins in pins.h. This allows the pins to be used for M42. 2013-05-24 21:05:11 +02:00
Alexander Kasimir
e2ff536b03 Fixed typo in Comment 2013-05-22 16:02:03 +03:00
Robert F-C
40eb07bad4 Revert and extend previous change pin check change 
Reviert previous change of #if BLAH_PIN > 0 to #if defined(BLAH_PIN) &&
BLAH_PIN > -1. Unfortunately some times pin 0 is used. For my sins I've
gone through and replaced all unsafe checks of #if BLAH_PIN > -1 with
the safe version.
 2013-05-22 21:33:23 +10:00
Maik Stohn
bd33cf4a9f fixed typo / added "const" to defines for newer gcc compatibility 2013-05-21 17:58:34 +02:00
ErikZalm
567291e734 Merge pull request #485 from Banjer/Panelolu2_Melzi 
Add Panelolu2 support for Melzi
 2013-05-21 08:46:27 -07:00
Maik Stohn
8d80cbbf4c fix broken LCD commit #dfa549f268 from buildrob - GLCD/DOGM implementation was ignored 2013-05-21 16:53:38 +02:00
xifle
98d0d48191 fixed merge 2013-05-20 14:52:35 +02:00
xifle
bbe67fca5a soft tab correction 2013-05-20 14:50:39 +02:00
xifle
9eeb711c96 Merged from Upstream Master 2013-05-20 14:45:37 +02:00
Bas Spaans
424101110c Add Panelolu2 support for Melzi 2013-05-19 12:09:34 +02:00
Robert F-C
0d4a9444c4 Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1 2013-05-19 08:50:58 +10:00
Erik van der Zalm
86cce025f4 Added #ifdef NUM_SERVOS to servo.cpp 2013-05-18 23:12:28 +02:00
xifle
03141a5ef4 LCD: Added Deadzone at 100% Feedrate 
This adds a deadzone at 100% Feedrate when changing it at the status
screen/main menu. Prevents from unwanted feedrate-changing when
navigating back to the main menu and makes it easier to return to 100%.
 2013-05-18 19:53:46 +02:00
Gord Christmas
28ada096e2 Adding servo documentation 2013-05-18 06:01:58 -07:00
Robert F-C
4121311b9d Change to LCD status indicators 
The I2C LCD status indicators now indicate when the hotends or bed are
turned on at all (rather than just when they are in their heating phase)
 2013-05-18 22:30:42 +10:00
Robert F-C
dfa549f268 Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1 2013-05-18 21:59:39 +10:00
ErikZalm
64360164ad Merge pull request #482 from codexmas/Marlin_v1 
servosupport
 2013-05-16 10:19:00 -07:00
ErikZalm
86405cdd11 Merge pull request #479 from MStohn/thermocouple 
BUGFIXES for temperature.cpp / add RUMBA thermocouple support
 2013-05-16 10:06:59 -07:00
Erik van der Zalm
6c45c3f4e7 BariCUDA changes 2013-05-16 19:01:12 +02:00
Gord Christmas
96624f0f31 Forgot to include reference to Servo in makefile 2013-05-16 08:25:20 -07:00
Gord Christmas
dc59f07d24 First attempt at refactoring of original servo code. Only adding servo support as a start to keep things simple. 2013-05-16 07:03:01 -07:00
Gord Christmas
b668cb0516 Adding in clean copies of Servo library from Arduino 1.0.4 2013-05-16 06:47:42 -07:00
MaikStohn
95dff34b73 fixed wrong compare for min temp check of heater 1 and heater 2 2013-05-16 01:17:38 +02:00
MaikStohn
4cc6f9f6de fixed wrong pin initialization when using temperature 2 pin input 2013-05-16 01:17:08 +02:00
MaikStohn
61a48cc662 Add support for RUMBA thermocouple add on 2013-05-16 01:16:33 +02:00
MaikStohn
9cc15876be Add support for RUMBA thermocouple add on 2013-05-16 01:16:08 +02:00
ErikZalm
c9cf2174dd Merge pull request #474 from xifle/Marlin_v1 
Fixed "Cooldown" Selection not reseting bed temp
 2013-05-14 14:58:53 -07:00
Erik van der Zalm
bd2cd4903e Added #ifdef BARICUDA around the BariCUDA changes 2013-05-14 23:56:32 +02:00
Jordan Miller
37f3199df3 fixed problems in planner with solenoids for BariCUDA when set to 0 2013-05-14 23:35:01 +02:00
Jordan Miller
fbd899a37d Support for BariCUDA Paste Extruder derived from MakerBot Frostruder. Using Ultimachine RAMBo board. M126/M127 and M128/M129. 2013-05-14 23:34:45 +02:00
xifle
29bb8d7d4f Fixed "Cooldown" Selection not reseting bed temp 
- enquecommand with multiple lines "\n" doesn't work -> M140 S0 didn't
get processed. So I wrote a new func for the cooldown which uses
setTargetHotend. In addition this does return to status page after
selection.
    - Added setWatch() to preheat-functions (Temperatur sanity check
would never have worked when preheating from the lcd panel)
 2013-05-14 16:56:19 +02:00
Robert F-C
015d0594b0 Optimize menu selection for Viki rotary encoder. 
The Viki LCD rotary encoder uses a different number of steps per
rotation. This fixes the seeming "missed" steps when selecting a menu.
 2013-05-12 07:51:28 +10:00
gregor
2739c26c4f changes: 
- changed the variables from keypad to reprapworld_keypad
- added a missing ifdef check
 2013-05-10 22:20:02 +02:00
gregor
6fb9573157 added support for the reprapworld keypad 2013-05-10 21:57:17 +02:00
Tim Anderson
594193c908 Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1 2013-05-06 23:29:38 -06:00
Tim Anderson
1fa61c297e Turning off Control Panel by Default and Updating the link to the LiquidCrystal_I2C library to avoid confusion. 2013-05-06 23:23:54 -06:00
kiyoshigawa
b27a59f41e Added support for Elefu RA Board and Elefu Control Panel 2013-05-06 08:44:38 -06:00
midopple
a65a26d6b4 If CORE_XY is in use X and Y Axis had to be activated at the same time 2013-05-05 19:23:59 +02:00
midopple
db2f157a22 Replace the <= to < in the Command M907, M350 and M351. 
The for loop for Axis count over the Array.
Add a break after M907
 2013-05-05 19:19:55 +02:00
Scott Lahteine
a5cd582665 Support for 10 level deep SD folder hierarchy 2013-05-04 04:18:02 -07:00
Arnoud
fc4ab05157 Solved minor bug in controllerFan() 
Extruder 2 was checked where extruder 1 should be checked.
 2013-05-03 21:32:34 +02:00
Scott Lahteine
0ef54f2f85 Make M303 silent when "S0" is sent 
If S is left out perhaps it should be silent, but check the spec for
this M code.
 2013-05-02 09:55:15 -07:00
Scott Lahteine
a200521eab Added CUSTOM_MENDEL_NAME option to Configuration.h and language.h 
Also cosmetic comment changes and spelling corrections in printed
messages
 2013-05-02 09:22:58 -07:00
Martin Renold
1a397825f9 fix DEFAULT_AXIS_STEPS_PER_UNIT minor Z rounding error 2013-05-01 08:30:24 +02:00
Robert F-C
289c02eda4 Remove unnecessary pin initialization in stepper.cpp 
(duplicates initialization in Marlin_main.cpp)
 2013-04-30 01:11:23 +10:00
Robert F-C
d5ad7a0814 Rework change to incorporate CONTROLLERFAN 
Also refactor extruder auto fan logic to simplify further and now only
check every 2.5 seconds
 2013-04-30 01:08:29 +10:00
Robert F-C
c3cdaceab3 Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1 2013-04-29 22:13:55 +10:00
Robert F-C
1c127217df Make DOGLCD merge neater. 2013-04-29 22:03:37 +10:00
Robert F-C
7f57f28ccc Add lcd_buzz function to ultralcd.h so that non-LCD code can make use of lcd's buzzer. 
Argument order of lcd_buzz was set to mirror that on tone(). Change
default M300 frequency to something audible.
 2013-04-29 21:50:52 +10:00
Robert F-C
788d62bcc4 Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1 
Conflicts:
	Marlin/Marlin.pde
	Marlin/ultralcd.cpp
	Marlin/ultralcd_implementation_hitachi_HD44780.h
 2013-04-29 21:13:46 +10:00
Lukasz Stefanowicz
d71f1e9bf6 Add (as an option) slower SD transfer mode 2013-04-24 10:50:57 +02:00
ErikZalm
db5bb8546d Merge pull request #452 from MStohn/Marlin_v1 
128x64 RepRapDiscount Full Graphic Smart Controller support
 2013-04-23 09:43:37 -07:00
daid
4b2ece159b Merge pull request #453 from brackendawson/Marlin_v1 
Make Gen7 1.4+ heater temp sensort pins match silkscreen.
 2013-04-16 10:12:25 -07:00
Bracken Dawson
d5ee2a5a62 Make Gen7 1.4 heater pins match silkscreen 2013-04-16 17:37:38 +01:00
MaikStohn
7ac6d7f78e FIX: Speedup - no explicit display clear needed in u8glib 2013-04-16 14:22:24 +02:00
MaikStohn
13596e8722 Added RepRapDiscount FULL GRAPHIC Smart Controller 2013-04-16 14:21:39 +02:00
MaikStohn
3a6abe1d6e Removed STB custom font hack from u8glib library and moved to marlin project 2013-04-16 13:54:39 +02:00
MaikStohn
16afbf9bfa FIX: adopted latest changes from hitachi implementation 2013-04-16 13:51:48 +02:00
daid303
34bca48b98 Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1 2013-04-15 15:11:38 +02:00
daid303
ac52dcc174 Updated the card menu and watch messages to make it more informative. 2013-04-15 15:11:22 +02:00
Stefanowicz
31bb3fb297 Fix: Build error when EEPROM_SETTINGS is defined and PIDTEMP is undefined 2013-04-12 18:04:32 +02:00
daid303
c80a78bb70 Lower the default max E feedrate a bit. With the stepper fix this is much to high. 2013-04-12 13:54:38 +02:00
Simon Oliver
5d5909fc25 Fix failure to compile with heated bed: remove call to non-existant scaleBedPID(). 2013-04-12 13:32:47 +02:00
Simon Oliver
93f0463b21 Allow Edit menu to call fn after edit; Fix PID Ki and Kd display in menus; Actually use changed PID and Max Accel values 
Add new 'callback' edit-menu types that call a function after the edit is done. Use this to display and edit Ki and Kd correctly (removing the scaling first and reapplying it after). Also use it to reset maximum stepwise acceleration rates, after updating mm/s^2 rates via menus. (Previously, changes did nothing to affect planner unless saved back to EEPROM, and the machine reset).

Add calls to updatePID() so that PID loop uses updated values whether set by gcode (it already did this), or by restoring defaults, or loading from EEPROM (it didn't do those last two). Similarly, update the maximum step/s^2 accel rates when the mm/s^2 values are changed - whether by menu edits, restore defaults, or EEPROM read.

Refactor the acceleration rate update logic, and the PID scaling logic, into new functions that can be called from wherever, including the callbacks.

Add menu items to allow the z jerk and e jerk to be viewed/edited in the Control->Motion menu, as per xy jerk.

Conflicts:
	Marlin/language.h
 2013-04-12 13:31:30 +02:00
Bart K
4fa2260a59 Fixed cardreader.h to resolve issue #440 (Pull Request #425 missing file) 2013-03-31 19:59:16 -04:00
Erik van der Zalm
038d405254 Corrected #endif in language.h 2013-03-31 20:28:29 +02:00
Dirk Eichel
443aaa30bf Removed GIT fragments 
Seems that there was something wrong while merging
 2013-03-30 23:26:42 +01:00
ErikZalm
7f622467fc Merge pull request #425 from kefir-/m928_logging 
M928 logging
 2013-03-30 08:50:34 -07:00
ErikZalm
86867928ac Merge pull request #434 from DDRBoxman/Marlin_v1 
Add support for M300: Play beep sound
 2013-03-30 08:49:54 -07:00
ErikZalm
9a38cad6f0 Merge pull request #430 from STB3/GLCD_128x64_dots 
Final task of the 128x64dots GLCD implementation
 2013-03-30 08:49:14 -07:00
ErikZalm
7a5c474d91 Update Configuration.h 2013-03-28 21:27:50 +01:00
Dirk Eichel
4e448b700a Merged fetched files from Marlin_v1 branch 
Pull requests: #414 #433 #432 #428
 2013-03-26 21:43:04 +01:00
ErikZalm
9f2862ce48 Merge pull request #414 from whosawhatsis/Marlin_v1 
regenerated thermistor table 7
 2013-03-25 13:14:49 -07:00
ErikZalm
9fb8bd5685 Merge pull request #433 from whosawhatsis/bang-mode 
Separate PID_MAX from BANG_MAX
 2013-03-25 13:11:34 -07:00
Colin Edwards
0d075378d5 Add LARGE_FLASH define and enable it for some of the beefier boards 
The LARGE_FLASH flag allows superfluous features to be excluded
on boards with less memory
 2013-03-25 10:42:27 -05:00
Colin Edwards
9a1c90471f Ignore unused beeper pins 2013-03-25 10:28:15 -05:00
Colin Edwards
1a0f889803 Add support for M300: Play beep sound 2013-03-24 23:35:05 -05:00
Robert F-C
9322c408c6 Updated for LiquidTWI2 library version 1.2.3 
The new version of the library means that PANELOLU no longer needs to be
defined in LiquidTWI.h (the library file can be used as is) and the new
version of the library also enables the buzzer on the Panucatt VIKI
panel.
 2013-03-24 18:19:58 +11:00
whosawhatsis
fd5b7e0cec Separate PID_MAX from BANG_MAX 
This allows PID_FUNCTIONAL_RANGE to use a maximum duty cycle higher
than PID_MAX. This is useful for powerful heaters to heat quickly in
bang-bang mode, but use a lower duty cycle that is easier to stabilize
in PID mode.
 2013-03-22 18:16:26 -07:00
blddk
e5a853a3d0 Added automated extruder fan function 2013-03-22 18:49:05 +01:00
blddk
72419f69a9 Added rumba 2013-03-22 18:41:54 +01:00
blddk
91bea43332 Added rumba pinout 2013-03-22 18:29:47 +01:00
blddk
d2b00fe486 Removed html and added rumba 
Found some unwanted html at the bottom of the file which caused it to not be able to compile.
Also added rumba as machine.
 2013-03-22 18:28:16 +01:00
Dirk Eichel
6c66cae694 GLCD init screen cosmetics 2013-03-19 21:25:11 +01:00
Dirk Eichel
f3e0e5184d Add include selector between char. LCD and GLCD 2013-03-19 20:59:21 +01:00
Dirk Eichel
5d3862f9d1 Modified u8glib logo on welcome screen 2013-03-19 20:32:23 +01:00
Dirk Eichel
0b320f75e9 Removed debug code, add some comments 2013-03-19 20:29:25 +01:00
Dirk Eichel
5f1cd70122 Add code to lcd_update() for GLCD 
This code selects between the routines for the GLCD or the char.
display.
 2013-03-19 20:19:16 +01:00
Dirk Eichel
a49c09a776 Add variable for animated fan, add float conversion w/o sign 
A new variable was introduced to allow fan animation on the GLCD.
Add additional float to string conversion routine without sign
character. This is used for the coordinates visualisation on the GLCD.
 2013-03-19 20:13:23 +01:00
Dirk Eichel
26d8863111 Add library selection between GLCD and char. LCD 2013-03-19 20:03:47 +01:00
Dirk Eichel
4a141a694f Marlin code for GLCD display 
This contains the menues, status screen etc...
 2013-03-19 19:59:56 +01:00
Dirk Eichel
83c790a020 Add bitmap graphics for GLCD 
1. Marlin welcome screen
2. Status screen symbols 3 Extruders, heated bed, animated fan logo 1
3. Status screen symbols 3 Extruders, heated bed, animated fan logo 2
 2013-03-19 19:57:35 +01:00
Dirk Eichel
233df9cca0 Add missing LF at the end of the file 2013-03-19 19:12:33 +01:00
Dirk Eichel
bb0de75a92 Removed umwanted HTML code ath the end of the file 
Sorry for that. This does not lead to compile errors. I removed the
unwanted code to make it clean.
 2013-03-19 06:46:05 +01:00
Ryan Turner
7c47e7162d Adding Maker's Tool Works heated bed thermistor 2013-03-18 22:53:37 -05:00
daid
af78d0cbfa Merge pull request #1 from illuminarti/Fix_E_Speed 
Fix step rate bug (especially for retraction)
 2013-03-18 23:36:11 +01:00
Dirk Eichel
9a78f321a4 Add pins for Motherboard variant 64 
These definition contain also the definition for the graphics LCD.
 2013-03-18 23:36:11 +01:00
Dirk Eichel
5de25ccd20 Add Motherboard variant 64 - STB V1.1 
Definition for the graphic LCD are already in it, they will not harm the
configuration as they are only defined constants
 2013-03-18 23:36:10 +01:00
daid
d6ce63c49c Merge pull request #411 from STB3/Marlin_w_STB_Board_support 
Add STB board support to Marlin (next step towards graphic LCD implementation)
 2013-03-18 07:57:39 -07:00
Ketil Froyn
f036be7c4e Clean up tab/whitespace from last commit 2013-03-16 23:11:58 +01:00
Ketil Froyn
07e11c7cf5 Add command M928 to enable logging to file of received gcode commands 2013-03-16 23:02:57 +01:00
daid
92782f9252 Merge pull request #1 from illuminarti/Fix_E_Speed 
Fix step rate bug (especially for retraction)
 2013-03-15 09:07:34 +01:00
whosawhatsis
6a61a3c0b4 missing comma in last commit 2013-03-08 16:15:49 -08:00
whosawhatsis
f0aee4101a regenerated thermistor table 7 
Generated with createTemperatureLookup.py. The old table crapped out at
270C, which was a problem for polycarbonate.
 2013-03-08 13:41:49 -08:00
Nicolas Rossi
aba67e2449 No bed config for RAMPS 
The motherboard 35 is a config without bed with this pins setting :
D8 Extruder
D9 Fan
D10 Controller Fan
 2013-03-05 15:51:24 +01:00
Nicolas Rossi
6504e96165 Turn off power supply off-load 
Disable the high current output and wait a little before to turn off,
because the interrupting capacity of the PSU is unknown.
Could be a function if needed by other.
 2013-03-05 15:03:48 +01:00
Nicolas Rossi
86bf911139 Toggle menu for PSU from LCD pannel 
From the prepare menu, accessible when is not printing, you have the
possibility to turn off the PSU when is on et vice versa.
From the host, you can turn off or turn on the PSU then the menu is
updated accordingly.
From the LCD message, the printer status is reported ready or off
respectively when the PSU is on or off.
 2013-03-05 14:52:51 +01:00
Robert F-C
7bad72359c Support encoder click on PANELOLU2 being read through I2C 
This change also handles the case where the pause/stop/restart button on
the VIKI is not used. Make LCD I2C buzz sound the same as the normal
buzz (300ms is too long for quick feedback).
 2013-03-03 18:47:50 +11:00
Robert F-C
1daf2f3256 Number of extruders is not an advanced configuration - it is a basic property. 2013-03-02 16:14:19 +11:00
Robert F-C
f1263d3f88 Further reduce code by using precompiler logic 2013-03-02 16:12:11 +11:00
Dirk Eichel
140e095c6e Add pins for Motherboard variant 64 
These definition contain also the definition for the graphics LCD.
 2013-03-01 17:47:32 +01:00
Dirk Eichel
b2c1c64fb1 Add Motherboard variant 64 - STB V1.1 
Definition for the graphic LCD are already in it, they will not harm the
configuration as they are only defined constants
 2013-03-01 17:39:54 +01:00
Dirk Eichel
ceb5ee38af Replaced corrupted language.h file on local PC with current from ErikZalm/Marlin 2013-03-01 17:27:57 +01:00
Dirk Eichel
8efd4cfd73 fixed merge conflict 2013-03-01 16:27:35 +01:00
Robert F-C
372e12f83f Implement automatic extruder/cold-end fan control based on temperature 
This change allows fan outputs to automatically turn on/off when the
associated nozzle temperature of an extruder is above/below a threshold
temperature.
Multiple extruders can be assigned to the same pin in which case the fan
will turn on when any selected extruder is above the threshold.
It also makes the M42 command compatible with the M106/M107 command.
The majority of the logic in this change will be evaluated by the
compiler at build time (i.e, low code space requirements).
 2013-03-01 21:57:23 +11:00
Robert F-C
6beb42cdf6 Attempt to address Bernhard's comments 
Refactor configuration to try to make items clearer (what defines a
panel vs what is user changeable).
 2013-03-01 01:17:07 +11:00
Robert F-C
839bef6d5d Fix Configuration.h file to not define LCDs be default. 
Also fix compile time check in Marlin.pde
 2013-02-28 02:32:20 +11:00
Robert F-C
1292d735ba Converge all I2C LCD branches (PANELOLU2, VIKI & PCF8575) 
This includes refactoring the buttons code to remove a large amount of
non-pin dependent duplication from pins.h.
 2013-02-28 02:04:51 +11:00
daid303
4eb81a69e6 Only compile the new extruder offset code if you have multiple extruders. 2013-02-27 12:32:07 +01:00
daid
3e9cd334a4 Merge pull request #383 from dob71/jeff 
Hotend offset handling for multi-extruder machines
 2013-02-27 03:10:18 -08:00
MendelMax
67710df9f3 Made i2c mode wok with the hardware I am able to test (ywrobot / sainsmart i2c LCD 2004) 
Removed incorrect LiquidCrystal_I2C Library
 2013-02-26 22:22:12 +00:00
Bob Clough
b6209c86dd Added import of Wire Library to make I2C LCD support compilable 2013-02-25 15:15:23 +00:00
Bob Clough
2b567d1df5 Added I2C port expander support to HD44780 2013-02-25 14:22:14 +00:00
Bob Clough
06272f463d Added Config variables for activating I2C LCDs and setting type and address 2013-02-25 14:14:46 +00:00
daid303
de3dec7215 Also show the tune menu when USB printing. 2013-02-20 00:54:44 +01:00
Denis Bakin
73d41c10b9 Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into jeff 
Conflicts:
	Marlin/language.h
	Marlin/thermistortables.h
 2013-02-18 12:10:52 -05:00
daid
63da4dc59a Merge pull request #398 from DanieleSdei/Marlin_v1 
Marlin v1, alignment of the Italian language
 2013-02-16 15:41:43 -08:00
Daniele Sdei
82e28851bd Italian language: SD-Card change and SD-Card init 2013-02-16 12:17:29 +01:00
Daniele Sdei
aed5965ad8 Italian language: remove space and some fix 2013-02-16 12:14:50 +01:00
codenamepawel
d360846dd4 Update Marlin/language.h 
Update Polish language 	#define MSG_RESUMING "Wznawiam drukowanie"
 2013-02-16 03:42:53 +01:00
daid303
2f60e324dc Fixed #394 2013-02-14 14:04:26 +01:00
daid
5e2abfcdcd Merge pull request #391 from STB3/Marlin_with_SD-Card_Change_Menu 
Add SD-Card change and SD-Card init. for electronics equipped with LCD Display
 2013-02-13 08:56:00 -08:00
Dirk Eichel
a0d4e8e78e Add Messages for SD Card init. & change 2013-02-13 10:05:18 +01:00
mfeherpataky
bbf0cc1379 Update Marlin/ultralcd_implementation_hitachi_HD44780.h 
Fix to a bug that I just introduced - sorry. Forgot about offset of string length.
 2013-02-12 20:06:51 +01:00
Dirk Eichel
c8f1fbd9d8 Add SD-Card change and SD-Card init. 
Add SD-Card change and SD-Card init. for reprap electronics without
SD-Chard change detect pin.
 2013-02-12 17:35:46 +01:00
mfeherpataky
71ddb8dc60 Update Marlin/ultralcd_implementation_hitachi_HD44780.h 
Use all available characters in narrow LCDs < 20 characters.
 2013-02-12 00:03:40 +01:00
mfeherpataky
d2c547c407 Update Marlin/ultralcd_implementation_hitachi_HD44780.h 
Fix to a minor bug with hardcoded LCD_WIDTH that draws edited values outside of the 16 characters width LCDs.
 2013-02-11 23:25:24 +01:00
Denis B
70871715e4 Added support for extruder offset handling 
The extruder offset can be specified in the configuration
file or adjusted on the fly using the "M218 T# X# Y#" command.
The EEPROM support is not yet merged in.
The "T#" command can take option "F#" that specifies the feedrate
at which the printing head should be re-positioned. If not
specified the re-positioning move is not preformed immediately,
but the coordinates are adjusted for the printer to properly
position the head when the next movement happens.
 2013-02-04 23:05:45 -05:00
Denis B
49b2ddc8c1 Cleaned up non-standard characters 2013-02-04 01:41:40 -05:00
Bernhard Kubicek
f8876a7958 Merge pull request #376 from kintel/skip_longfilenames 
Also skip .files and _files with long filenames. I think its better than before. If somebody dislikes it, or wants additional configuration, it can be done in a future step. Thanks, Marius, and nice to have you helping!
 2013-02-03 03:05:31 -08:00
daid
18fcc367d2 Merge pull request #371 from Banjer/Melzi_LED_PIN 
Chenged LED_PIN for Melzi boards, added comment about broken versions of...
 2013-02-02 03:23:43 -08:00
Bas Spaans
19ce90fe02 Added comment about M42 usage (clean) 2013-01-31 18:20:23 +01:00
Bas Spaans
00fed0a703 Revert "Extended comment explaining M42 usage" 
This reverts commit 01541ee64c.
 2013-01-31 18:11:13 +01:00
Marius Kintel
e06d820909 Also skip .files and _files with long filenames 2013-01-31 12:07:42 -05:00
Bas Spaans
01541ee64c Extended comment explaining M42 usage 2013-01-31 18:00:25 +01:00
Marius Kintel
f24f02e212 compile fix: quickStop() needs stepper.h 2013-01-31 10:43:03 -05:00
Bas Spaans
12c41423ad Fixed typo in comment 2013-01-30 22:54:04 +01:00
Bas Spaans
0995eaa492 Chenged LED_PIN for Melzi boards, added comment about broken versions of the Sanguino libraries 2013-01-30 22:25:01 +01:00
Bernhard
1d06b10962 Added a feature to have filament change by gcode or display trigger. 
[default off for now]
syntax: M600  X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]

if enabled, after a M600, the printer will retract by E, lift by Z, move to XY, retract even more filament.
Oh, and it will display "remove filament" and beep like crazy.

You are then supposed to insert a new filament (other color, e.g.) and click the display to continue.
After having the nozzle cleaned manually, aided by the disabled e-steppers.
After clicking, the printer will then go back the whole shebang, and continue printing with a fancy new color.
 2013-01-27 13:21:34 +01:00
daid303
408b349a84 Fixed #368. Commented out the wrong pin definition, but explained why it is there. 2013-01-21 15:46:17 +01:00
Daniele Sdei
9ecb267b63 Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1 2013-01-14 15:47:40 +01:00
Daniele Sdei
3cf59f6f9a add RepRapPro Huxley thermistor tables 2013-01-14 15:36:08 +01:00
daid
c1730e2b08 Merge pull request #363 from yuroller/sanguino_panelolu 
Panelolu pin assignment for sanguinololu
 2013-01-10 07:19:37 -08:00
Yuri Valentini
86358dd6cd Panelolu pin assignment for sanguinololu from http://reprap.org/wiki/Panelolu 2013-01-10 12:23:20 +01:00
daid303
0f3f5d083d Minor cleanup of the new FAN_KICKSTART code. #334 2013-01-10 11:08:45 +01:00
daid
6ec56fa923 Merge pull request #334 from KevinOConnor/FanKick 
Add feature to briefly run the cooling fan at full speed when it first starts.
 2013-01-09 02:47:59 -08:00
daid
965baf2683 Merge pull request #362 from daid/Marlin_v1 
Finnish language
 2013-01-09 02:42:09 -08:00
Kevin O'Connor
3d91bd486c Add "kick fan" feature - briefly run fan at full speed on start. 
Add a feature to run the cooling fan at full speed for a small period
(default 100ms) when first starting the fan.  Some fans wont reliably
start spinning at low power, and many fans have issue with the PWM at
low power.  However, once the fan starts spinning it can reliably be
set to a wide range of PWM values.
 2013-01-08 18:50:15 -05:00
Kevin O'Connor
3f2f94ef28 Be consistent in setting of the fan PWM. 
Always set the FAN PWM value in check_axes_activity() and always use
the value of the active move if a move is active.
 2013-01-08 18:49:18 -05:00
Henry Palonen
7f30039d2a + Finnish translation 2013-01-08 19:21:34 +02:00
daid303
14e1d495ef Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1 2013-01-08 17:10:30 +01:00
daid303
bbe7d3d0fe Fixed #312 2013-01-08 17:09:57 +01:00
daid
7ce509b9a7 Merge pull request #361 from yuroller/MakefileSanguino 
Makefile sanguino
 2013-01-08 06:22:27 -08:00
Yuri Valentini
9c34c4f05b fixes for ramps compilation using installed arduino ide 2013-01-08 12:54:31 +01:00
daid303
442ade15a6 Move Gen6 stuff into a proper location. 2013-01-08 12:31:28 +01:00
daid
5fd4582cc8 Merge pull request #242 from Drakelive/Marlin_v1 
Fixes issues # 216 and # 135 for Gen6 and Gen6 Deluxe board
 2013-01-08 03:29:20 -08:00
daid303
8b88e3b386 Fixed #345, Fixed #267. 2013-01-08 12:14:55 +01:00
daid
27843388c6 Merge pull request #360 from njprossi/Marlin_v1 
Power signal control definitions for other power supplies
 2013-01-08 02:58:02 -08:00
daid303
921273baa0 Added optional feature to stop printing when an endstop is hit. Made the Z display on the LCD in 3.2 format instead of 3.1. Added LCD message when and endstop is hit. 2013-01-08 11:53:18 +01:00
Yuri Valentini
7d20ec706e Added libraries from Arduino 1.0.3 for sanguino build 2013-01-07 17:26:50 +01:00
Nicolas Rossi
437eb3bafc Initialize PS_ON at startup 2013-01-07 14:57:51 +01:00
Nicolas Rossi
f3c1fc70a9 Power signal control definitions for ATX and others 2013-01-07 14:33:30 +01:00
Yuri Valentini
dad7691df9 makefile for sanguino standalone compilation 2013-01-07 11:08:10 +01:00
Erik vd Zalm
6752cb2d9c PID now per extruder. Fixed typo 2013-01-06 14:26:23 +01:00
Erik vd Zalm
0ac452e252 Disable is now multi extruder compatible. M84 got a T option. 2013-01-06 13:37:01 +01:00
Johann Rocholl
9e7b5056a0 {X,Y,Z}_{MIN,MAX}_POS are actually in Gcode coordinates. 2012-12-28 16:20:10 -08:00
Daniele Sdei
5f82f03ff3 Add italian MSG_RESUMING. 2012-12-28 11:44:35 +01:00
daid303
5e3873c8db Add german MSG_RESUMING. 2012-12-25 20:53:11 +01:00
daid303
01aac2a142 Small changes on the LCD panel, let the speed control work better, line up the parameter edit the same as the menu, remove some unused defines, and remove the Z from the 10mm move menu. 2012-12-21 16:14:47 +01:00
daid303
b69cb9fbd9 Change the end of SD cart print message from minutes/seconds to hours/minutes. 2012-12-19 12:26:40 +01:00
daid
30254e3388 Merge pull request #350 from jcrocholl/Marlin_v1 
Automatically set *_MIN_PIN and *_MAX_PIN according to *_HOME_DIR.
 2012-12-17 02:16:31 -08:00
daid303
38ee395ac7 Replace the 1ms delay for 2 nops to get a 100ns delay. #259 2012-12-17 11:12:11 +01:00
daid303
5df5e4c4a2 Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1 2012-12-17 11:09:18 +01:00
daid303
a95dcd74e7 Fix some of the duplicated PSTRs, saving 500bytes of flash with LCD on. 2012-12-17 11:09:09 +01:00