bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
9,346 Commits 1 Branch 4 Tags 151 MiB
9ecdd1f4c7
Commit Graph

771 Commits

Author SHA1 Message Date
Mateusz Krawczuk
bb1a6eea88
Remove pin count check for MIGTHYBOARD_REVE 
Remove assert and unused code since it is implemented in pinsDebug_plus_70.h
 2017-11-21 14:38:02 +01:00
Scott Lahteine
1ce0fb336b Patch Max7219_LED_Set input args 2017-11-20 21:15:15 -06:00
GMagician
a61127a421 [2.0.x] tool change bad behaviours 
This will solve 2 issues on tool change.
1) when no home is done ("no_move" is set) tool change should never move X & Y because... I don't know where I am...only Z should be adjusted to avoid bed collision if other nozzle is lower than current.
Since no move no bed level matrix should be applied
2) When SWITCHING_NOZZLE is enabled and system is homed there are two movements to go to destination, but first can move Z to older position and then crash on the bed
 2017-11-20 16:34:55 -06:00
Vitaliy Sapyanov
e2724c68ab Update pins_RURAMPS4D.h 
Add and bugfix pins
 2017-11-20 15:36:13 -06:00
Scott Lahteine
9770062309
Merge pull request #8463 from thinkyhead/bf2_32bit_M42 
[2.0.x] Updates to Anet A8 configurations
 2017-11-20 15:12:30 -06:00
Scott Lahteine
3066655727 Try port*100+pin, fix config dependency 2017-11-20 13:58:23 -06:00
Scott Lahteine
ba8bc7ea80 Cosmetic tweaks 2017-11-20 13:58:02 -06:00
Scott Lahteine
f409147116 Fix P2_04, P2_05 2017-11-20 13:58:02 -06:00
Bob-the-Kuhn
a28ccabe2a M42 P1.20 fix 2017-11-20 13:58:02 -06:00
Unknown
33912fa7e8 Update Temperature::setPwmFrequency prototype to match source 
Introduced with #8446
 2017-11-20 01:50:41 -08:00
Scott Lahteine
b9327a4d16 Misc. general cleanup 2017-11-19 15:43:39 -06:00
Scott Lahteine
8836623e0f Fix sq/min/max macros after platform headers 2017-11-19 15:43:39 -06:00
Scott Lahteine
fe4f009fdd 32-bit unless… 2017-11-19 15:43:38 -06:00
Scott Lahteine
25af9decfe Remove enum.h include of MarlinConfig.h 2017-11-19 15:43:38 -06:00
Scott Lahteine
1d4571b88d Dependency adjustments 2017-11-19 15:43:38 -06:00
Scott Lahteine
550f1025f0 Try using <Arduino.h> everywhere 2017-11-19 14:23:02 -06:00
Scott Lahteine
c0000a0cdc Move servo code to modules/servo.* 2017-11-19 14:23:02 -06:00
Scott Lahteine
81bc428b48 Don't compile custom u8g without DOGLCD 2017-11-19 13:58:38 -06:00
Bob-the-Kuhn
c14000775b PWM fixes, slow down fan update 
include LPC1768 syntax for M42

couple more pin_t changes

consistency

change M42 to R, P format

Revert "change M42 to R, P format"

This reverts commit 01f12f579ec9ccc1bb9126e68d2c86449e9b7edf.
 2017-11-18 07:05:50 -06:00
Scott Lahteine
60adc6ff02 Display filwidth ratio in terms of E mm 2017-11-18 07:01:49 -06:00
Scott Lahteine
6e533748eb Fixes #8472 2017-11-18 05:15:55 -06:00
Scott Lahteine
485abb023b
Merge pull request #8456 from thinkyhead/bf2_wednesday_tweaks 
[2.0] No retroactive adjustment with M851 Z
 2017-11-18 04:49:53 -06:00
Scott Lahteine
3bba7d60f3 No retroactive changes with M851 Z 
If using babystep to adjust the Z probe offset, the axis will move and the mesh will be updated at the same time, causing a doubling of the Z offset over the rest of the print.

To correct for this, the current Z position would need to be modified in the opposite direction, canceling out the additional Z offset added to the mesh. This would be confusing to users, and moreover it would not be accurate without also taking the current Z fade level and current Z height into account.

It might make sense to change the mesh in the case where no babystepping is taking place, but this could be considered an undesirable side-effect of changing the `zprobe_zoffset`.

One way to remedy this would be to return to storing the mesh with `zprobe_zoffset` included, then subtracting `zprobe_zoffset` from the returned Z value. Thus, a babystep moving the Z axis up 1mm would subtract 1 from `zprobe_zoffset` while adding 1 to all mesh Z values.

Without including the `zprobe_zoffset` in the `z_values` there is no safe way to alter the mesh in conjunction with babystepping, although it's fine without it.
 2017-11-18 03:36:39 -06:00
Scott Lahteine
32512332df Apply some formatting 2017-11-18 03:12:30 -06:00
Scott Lahteine
7dacc999b9 Remove obsolete show_bootscreen var 2017-11-17 17:01:43 -06:00
Roxy-3D
9729528d13
Update UBL's Delta Probable locations 
This is a non-intuitive change.   @oldmcg says in this post https://github.com/MarlinFirmware/Marlin/issues/7572#issuecomment-340641207 that using DELTA_PRINTABLE_RADIUS is better than DELTA_PROBABLE_RADIUS for setting the probe limits.   This is because the automatic probe code checks all locations for being reachable by the probe prior to doing the probe.
 2017-11-17 16:44:57 -06:00
Scott Lahteine
d48cb6bf41 Apply coding standards to Max7219 2017-11-17 15:32:21 -06:00
Scott Lahteine
bd8bcf06e7 Updates to Anet A8 configurations 
Based on #8426
 2017-11-16 23:19:36 -06:00
Bob-the-Kuhn
7eea000f4b E0 auto fan fixes 2017-11-16 18:42:56 -06:00
Scott Lahteine
b2dda096fe Fix FILAMENT_LCD_DISPLAY for disabled state 2017-11-16 16:57:48 -06:00
Scott Lahteine
1e8afb66b7 Fix a planner comment 2017-11-16 16:57:47 -06:00
Scott Lahteine
50f09cc029 Miscellaneous cleanup 2017-11-16 00:47:16 -06:00
Scott Lahteine
63257dc083 Fix M503 output for M145 
Fixes #7978
 2017-11-15 04:00:18 -06:00
Scott Lahteine
0918dae66e Add OV() macro for use in thermistor tables 2017-11-15 03:15:18 -06:00
Scott Lahteine
24057270a3
Merge pull request #8420 from RowanMeara/rm-dithering-2.0.x 
[2.0.x] Fix Software Fan PWM
 2017-11-15 02:30:19 -06:00
Scott Lahteine
5079a02c90 Add HAL_SERVO_LIB to HAL_Due.h 2017-11-15 02:07:01 -06:00
Scott Lahteine
9c3761047e
Merge pull request #8434 from thinkyhead/bf2_fix_M32_subroutines 
[2.0] Fix 'M32 P' subroutines
 2017-11-15 01:15:02 -06:00
Scott Lahteine
e0d367f1fb Fix M32 P subroutine handling 2017-11-15 00:44:21 -06:00
Scott Lahteine
9f8b4c5ee8 Patch SD lib files for readability 2017-11-15 00:44:21 -06:00
Scott Lahteine
2c8c30437e Fix parser parameter value handling 2017-11-14 23:20:33 -06:00
RowanMeara
6131533157 Change dithering behavior to intended. 2017-11-14 00:47:07 -08:00
Scott Lahteine
e70b44dc0b Make sure leveled[] is defined for later use 2017-11-14 02:13:38 -06:00
Scott Lahteine
54774841ba
Merge pull request #8416 from thinkyhead/bf2_M114_DETAIL 
[2.0] Add M114_DETAIL to Configuration_adv.h
 2017-11-14 00:28:55 -06:00
Scott Lahteine
009e3a7aa7 Add M114_DETAIL to Configuration_adv.h 2017-11-14 00:03:17 -06:00
Scott Lahteine
6d6c3b1e97 Fix up REPRAPWORLD_KEYPAD defines 2017-11-13 22:14:54 -06:00
Scott Lahteine
3f0a982b8c Move Filament Width Sensor to Configuration_adv.h 2017-11-13 21:05:57 -06:00
Scott Lahteine
b76e173205 Move test extrusion options under G26 2017-11-13 21:05:57 -06:00
Scott Lahteine
14ebedca27 Drop unused LARGE_FLASH option 2017-11-13 15:44:24 -06:00
Scott Lahteine
b7feb53e8a Support for Extrudrboard in Printrboard Rev.F 2017-11-13 15:44:23 -06:00
Scott Lahteine
91baca6abb Patches for compiler warnings/errors 2017-11-13 04:43:47 -06:00
Scott Lahteine
2f73dec077 Apply native workspace fixes for G92, G53-59 2017-11-13 02:09:12 -06:00
Scott Lahteine
04abd8d459 Improve and clarify M428 code 2017-11-13 02:09:11 -06:00
Dave Johnson
c009a990e4 [2.0.x] Fix some 8-bit Teensyduino compile warnings (#8385) 
* Fix some 8-bit Teensyduino compile warnings

-Override Teensyduino legacy NOT_A_PIN 127 define
-some fixups for Printrboard_RevF pins

* Proper cleanup of Printrboard Rev.F pins

* Apply LCD fixes to Printrboard v1
 2017-11-13 01:07:59 -06:00
Scott Lahteine
e8e92f8969 No leveling data in M114 if no leveling is enabled 2017-11-12 23:03:38 -06:00
Scott Lahteine
f5d210c35c Fix report_current_position 2017-11-12 23:02:53 -06:00
Roxy-3D
faaae7a1b2
Provide more clearance for BL-Touch probe 2017-11-12 13:11:22 -06:00
Scott Lahteine
06ee6584fd Remove offsets from soft endstops, tool change 2017-11-11 22:47:38 -06:00
Scott Lahteine
c938273bd5 Coding standard patch of M290 2017-11-11 22:14:21 -06:00
Scott Lahteine
98c1265e3b Disable laser power when PWM goes to 0 2017-11-11 22:00:22 -06:00
Scott Lahteine
d4a1154c25 Use do_blocking_move_to where possible 2017-11-10 20:55:23 -06:00
Scott Lahteine
36426af564
Merge pull request #8356 from tcm0116/2.0.x-M600 
[2.0.x] Normalize load/unload length in M600
 2017-11-10 19:44:08 -06:00
Scott Lahteine
1ed86adf9c Cleanup around updatePID 2017-11-10 19:27:34 -06:00
Scott Lahteine
75a58ee4b8 Fix position_is_reachable bug in waiting 2017-11-10 19:27:33 -06:00
LVD-AC
e334efb2a7 PROBE_MANUALLY etc. 2017-11-10 19:27:33 -06:00
Bob-the-Kuhn
b6415dc169 finish 2017-11-10 14:39:55 -06:00
Scott Lahteine
0efa66be0b Updates to Traditional Chinese 
From @cheton at #8347
 2017-11-10 04:52:20 -06:00
Scott Lahteine
cba9c1cf9e Add pre-calculated planner.e_factor 2017-11-10 03:14:24 -06:00
Thomas Moore
600c85226e Normalize load/unload length in M600 2017-11-10 02:31:46 -06:00
Scott Lahteine
81b91b3f9d Clean up some trailing white-space 2017-11-10 02:31:04 -06:00
Roxy-3D
2f9848ede3
Correct gMax 1.5+ example file 
And...   Keep both branches in synchronization.
 2017-11-09 23:44:14 -06:00
Scott Lahteine
006dad4b52 Add pins_RURAMPS4D.h & change pins.h 
http://3dtoday.ru/blogs/svs0724/ruramps4d-ramps-for-adruino-due-the-pilot-shipment-available-for-zack/
 2017-11-09 21:51:06 -06:00
Scott Lahteine
00514857e9 SBASE serial port -1, RAMPS spacing 2017-11-09 21:41:07 -06:00
Scott Lahteine
c66696c507
Merge pull request #8344 from tcm0116/2.0.x-delta_height 
[2.0.x] Add delta_height variable in lieu of using home_offset
 2017-11-09 01:21:53 -06:00
Scott Lahteine
22e18fe832 Patch _manual_goto_xy for kinematics 2017-11-08 22:21:38 -06:00
Scott Lahteine
0cfb936dd1 Clarify some motion code 2017-11-08 22:15:55 -06:00
Thomas Moore
f34c3597dc Add delta_height variable in lieu of using home_offset 2017-11-08 22:10:08 -06:00
Bob-the-Kuhn
d47fbf791b Arduini IDE compatibility changes 
changed includes to make Arduino IDE happy
 2017-11-08 20:49:49 -06:00
Scott Lahteine
95ea43bde4 Update XYZ dual stepper configurations 2017-11-08 20:31:43 -06:00
Scott Lahteine
b0b4a20930 Tweaks to core motion code 2017-11-08 20:09:09 -06:00
Scott Lahteine
8805e24cc7
Fix tilt_mesh_based_on_probed_grid output bug 2017-11-08 20:06:20 -06:00
Scott Lahteine
24437fbb13
Fix G26 Y argument bug 2017-11-08 19:20:10 -06:00
Scott Lahteine
09b05c9d79
Merge pull request #8321 from Bob-the-Kuhn/pins_re-arm 
2.0.x - pins_RAMPS_RE_ARM.h - add mega2560 pin numbers
 2017-11-08 13:11:13 -06:00
Scott Lahteine
e6788bb6ae Fix get_destination_from_command for E 2017-11-08 12:54:00 -06:00
Roxy-3D
967104e1ce
Default Extrusion Settings were off a few lines in some of the example config files. (#8333) 2017-11-08 11:56:00 -06:00
Bob-the-Kuhn
8875885a15 pins add old names 
fix typo

re-write PWM section, add "not on Re-ARM" list
 2017-11-08 11:11:38 -06:00
Roxy-3D
1c6e83c137
if !HAS_MESH we still need to do some motion! (#8328) 
* if !HAS_MESH we still need to do some motion!

Thank You MagoKimbra !

* Ooops....   need #else and not #elif
 2017-11-08 09:42:21 -06:00
Scott Lahteine
82f45c3e6a Patch G33 misuse of PROBE_MANUALLY 2017-11-08 00:36:06 -06:00
Scott Lahteine
064e6fe60e Remove debugging pin toggle from LCD code 2017-11-07 23:00:54 -06:00
Bob-the-Kuhn
0483a7df91 AVR RRD works 
LPC1768 VIKI2 & RRDFG are working

looks like all SPIs are working

library change

sh1106 locks up

fixed lockup, started I2C SW com

pretty

re-org

restore a few files

make library happy

switched HAL version of rrd

fix travis error

travis error fixes

another travis fix

cleanup

minor update

one more

correct spacing in platformio.ini
 2017-11-07 18:40:29 -06:00
Scott Lahteine
96c9d715f3 Patch abuse of sprintf_P in G33 2017-11-07 17:33:50 -06:00
Roxy-3D
ed62c621d7
Fix G26 Circle Drawing. Add Default Extrusion Settings (#8313) 
- Fix G26 Circle Drawing.
- Add default extrusion settings so machine can print lines on print bed
- Yet to be done: Get LCD Menu's to use these settings.
 2017-11-07 17:13:53 -06:00
Scott Lahteine
8fea26aa9d Fix PID_autotune watch temp increase value 2017-11-07 15:51:48 -06:00
Scott Lahteine
2c099fd4c2 Update Thermal Protection Documentation 2017-11-07 15:46:44 -06:00
Colten Edwards
a6160916b0 [2.0] Fix M48 for delta printers/ABL compile issue (#8286) 
* fix M48 for delta printers

fix M48 for delta printers. home printer if not already homed.

* remove ENABLED(DELTA)

remove ENABLED(DELTA) as it is not needed.

* Update M48.cpp

* abl needs queue.h

without queue.h abl will not compile since there is a script that runs at the end of it and we need to queue it up.
 2017-11-07 15:36:33 -06:00
Scott Lahteine
17ef0a513b Update G92 for native workspace 2017-11-07 13:07:16 -06:00
Scott Lahteine
b4bf8928aa German language updates 
Corresponding to #8306
 2017-11-07 12:10:29 -06:00
Thomas Moore
73ca5345e1 Fix Delta EEPROM 2017-11-07 16:48:21 +00:00
Scott Lahteine
714d2b9bbc
Merge pull request #8297 from thinkyhead/bf2_M118_and_others 
[2.0] Fix M118, compiler warnings, etc.
 2017-11-06 23:25:49 -06:00
Alexey Shvetsov
83555933aa Add platformio support for stm32 (#8246) 
[2.0] Add platformio support for stm32
 2017-11-06 23:03:59 -06:00
Scott Lahteine
85a62bbf46 Misc. fixes to compiler warnings, etc. 2017-11-06 22:57:05 -06:00
Scott Lahteine
e6aba99f16 Fix M118 parameters, with strict guideline 2017-11-06 22:57:01 -06:00
Scott Lahteine
e9b1944a67 Patch non-extended font option 2017-11-06 21:42:21 -06:00
Roxy-3D
6324b09934
Revert "Fix EEPROM crc (#8284)" (#8292) 
This reverts commit 172c36f517.
 2017-11-06 19:52:05 -06:00
Rowan Meara
172c36f517 Fix EEPROM crc (#8284) 2017-11-06 19:19:30 -06:00
Scott Lahteine
cc4d28b73c
Update bilinear for native workspace 2017-11-06 17:04:41 -06:00
Scott Lahteine
94c7205d64
Merge pull request #8281 from thinkyhead/bf2_alligator_dac 
[2.0] Use fastio for Alligator dac084s085, etc.
 2017-11-06 12:16:18 -06:00
Scott Lahteine
2246316605 Fix name collision. timer_t => hal_timer_t 2017-11-05 19:31:07 -06:00
Jason Hitesman
4efaef7039 [2.0.x] Fix archim2 SSDS define (#8278) 
* Fix SSDS define

* Update pins_ARCHIM2.h
 2017-11-05 19:23:19 -06:00
Scott Lahteine
c8dfa26bc8 Use fastio for STM32F1 endstop interrupts 2017-11-05 19:20:28 -06:00
Scott Lahteine
185dec800b Use fastio for HAL SPI EEPROM 2017-11-05 19:20:03 -06:00
Scott Lahteine
297666ea14 Use fastio for Alligator dac084s085 2017-11-05 19:14:42 -06:00
Scott Lahteine
c5d95d318b
Merge pull request #8249 from thinkyhead/bf2_nozzle_cleanup 
[2.0] Cleanup Nozzle class, fix XY vs Z move order
 2017-11-05 18:51:11 -06:00
Scott Lahteine
7e2fee9d56
Merge pull request #8274 from tcm0116/2.0.x-re_arm_D8 
[2.0.x] Correct RAMPS_D8_PIN for Re-ARM
 2017-11-05 18:39:28 -06:00
Scott Lahteine
59c558d612
Merge pull request #8275 from GMagician/2.0.x-Typo-fix 
[2.0.x] typo fix (removed spaces)
 2017-11-05 18:39:04 -06:00
Scott Lahteine
be73d5cc08 Cleanup Nozzle class, fix XY vs Z move order 2017-11-05 18:31:07 -06:00
GMagician
9e93b7ccbd [2.0.x] removed spaces 
Removed spaces in array declaration
 2017-11-05 20:42:48 +01:00
Thomas Moore
b91a822d7a Correct RAMPS_D8_PIN for Re-ARM 2017-11-05 13:03:42 -06:00
studiodyne
d295f984e3
Update fwretract.cpp 2017-11-05 15:42:30 +01:00
Scott Lahteine
1b40e9c464 Implement CNC_COORDINATE_SYSTEMS 2017-11-04 22:28:46 -05:00
Scott Lahteine
1b42fba39b Add CNC_COORDINATE_SYSTEMS to configs 2017-11-04 22:28:46 -05:00
Scott Lahteine
a22434508f Match tweaks to G33 from 1.1 2017-11-04 22:28:46 -05:00
Scott Lahteine
c07bbd4154 Prettify some EEPROM code 2017-11-04 22:28:46 -05:00
Scott Lahteine
d6aa127c76 Remove I2CPEM workspace offset 2017-11-04 22:28:46 -05:00
Scott Lahteine
79772219ae Fix Fan Multiplexer init 2017-11-04 22:28:46 -05:00
Scott Lahteine
ca7d36d9ed RAMPS pins for ANET_KEYPAD_LCD 2017-11-04 21:22:53 -05:00
Colten Edwards
e0a6ee8da5 [2.0] Fix up G33, LPC1768 + SDCARD_SORT_ALPHA (#8250) 
* Update Conditionals_post.h

* Add a cast to round() to convert to a unsigned int

Add's a cast to round() so that it will compile properly. round() returns a float which must be cast to a integer for the following % operation. Use a unsigned int as a negative index to an array is wrong. Should never be more than 255 points allowing us to use a 8 bit cast.

* Update G33.cpp
 2017-11-04 18:04:18 -05:00
Scott Lahteine
dac1f6fe74 Tweaks to cubic_b_spline code style 2017-11-04 14:46:10 -05:00
Scott Lahteine
4df024d7b9
Merge pull request #8234 from thinkyhead/bf2_native_operation 
[2.0.x] Operate in Native Machine Space
 2017-11-04 14:31:44 -05:00
Scott Lahteine
601ccded89 Fix case-insensitive config issue 2017-11-04 14:10:13 -05:00
Scott Lahteine
f8393a0908 Operate in Native Machine Space 2017-11-04 00:05:38 -05:00
Scott Lahteine
d83a9a53e8
Merge pull request #8220 from thinkyhead/bf2_serial_port_-1 
[2.0] Add SERIAL_PORT -1 option for configurators
 2017-11-03 15:25:12 -05:00
Scott Lahteine
93ba72ea83 Add SERIAL_PORT -1, set on SBASE, STM32F103RET6 2017-11-03 15:22:45 -05:00
Scott Lahteine
7e43dd1d23 Fix probes configuration url 
Based on #8241 by @machaj
 2017-11-03 13:35:40 -05:00
AnHardt
ca0e4b4e96 Some cleanup around 'lcd_bootscreen()' and 'lcd_kill_screen()' 
Move 'lcd_bootscreen()' from `lcd_init()` to 'setup()' where it is cexecute exactly once. Saves 'bool show_bootscreen'.
Move the call of 'lcd_custom_bootscreen()' to the begin of 'lcd_bootscreen()'.
Move the delays into the related functions.
Move the picture loop around 'lcd_kill_screen()' into the function.
 2017-11-03 12:02:48 +01:00
Scott Lahteine
84b93d941f
Merge pull request #8178 from thinkyhead/bf2_config_tweak 
[2.0.x] Faster menu navigation for Anet A8
 2017-11-03 04:49:17 -05:00
teemuatlut
70be4d206e [2.0.x] UltiMachine Archim2 (#8190) 
* UltiMachine Archim2 support

* SPI gets included by the library

* Invert TMC2130 diag pin state

* Clean up Archim2 pins

* Update Archim2 config

* FAN2 -> FAN1

* Cleanup

* Add brief Archim installation instructions

* Bring pins into compliance

* Update 1.0 SD Detect pin for 1.1

* Update Configuration.h

* Update pins_ARCHIM2.h
 2017-11-03 04:48:15 -05:00
Scott Lahteine
f3deb37bdf
Merge pull request #8236 from thinkyhead/bf2_protect_M303 
[2.0.x] M303 thermal runaway protection
 2017-11-03 04:42:14 -05:00
Scott Lahteine
31f112cf58 Cleanup trailing whitespace 2017-11-03 04:07:45 -05:00
Scott Lahteine
2f9e42feb9 M303 thermal runaway protection 2017-11-03 03:57:46 -05:00
Scott Lahteine
e5ae545647 Remove ADCKey steps acceleration 2017-11-03 03:41:55 -05:00
Luc Van Daele
6827e243a0 [2.0.x] G33 magic numbers (#8171) 
* [2.0.x] G33 magic numbers

* oops

* Comments

* oops

* warning

* better comment section

* remarks

* extra grids
 2017-11-03 03:36:16 -05:00
Scott Lahteine
8735ae984b
Merge pull request #8227 from tcm0116/2.0.x-pin_mapping 
LPC1768: updates to use the new pin_t typedef
 2017-11-03 03:10:19 -05:00
AnHardt
c72a0610b4 Fix watchdog in WATCHDOG_RESET_MANUAL mode AVR 2017-11-03 04:43:00 +01:00
Thomas Moore
13d839795c LPC1768: updates to use the new pin_t typedef 2017-11-02 18:43:57 -05:00
Scott Lahteine
eb13b8d985 Add MKS Gen L board 2017-11-02 17:06:08 -05:00
Morten
063e957fc4 Update pins_MKS_SBASE.h (#8188) 
* Update pins_MKS_SBASE.h

Deleted E_MUX2, not used.
Changed #define LCD_PINS_D4      P0_14  // EXP1.5 to #define LCD_PINS_D4      P0_15  // EXP1.5, wrong in MKS's pinout schematic.
Swapped TEMP_BED_PIN and TEMP_0_PIN port's, request from user, more logical...

* Update pins_MKS_SBASE.h

Moved MUX signals to J8 and re added MUX2, cleaner wiring..
 2017-11-02 13:50:23 -05:00
Scott Lahteine
f7133e53fd
Fix case light off 
Addressing #8205
 2017-11-01 21:22:15 -05:00
Scott Lahteine
0108d5181f Allow asterisks in G-Code commands 
Addressing #6655
 2017-10-31 21:20:41 -05:00
Scott Lahteine
34745b2183 Organize boards.h by architecture 2017-10-31 16:10:38 -05:00
android444
9cc1d8e312 [2.0.x] Support for SilverGate Board 2017-10-31 15:27:26 -05:00
Scott Lahteine
03e5369411 Faster menu navigation for Anet A8 
Addressing #8166
 2017-10-31 14:46:55 -05:00
Scott Lahteine
f1edf83720
Merge pull request #8187 from rafaljot/patch-5 
Update InterruptVectors_Due.cpp
 2017-10-31 14:14:08 -05:00
Scott Lahteine
b2bd77c40a
Merge pull request #8191 from thinkyhead/bf2_rearm_more 
[2.0.x] Add SDCARD_SORT_ALPHA options for LPC1768
 2017-10-31 14:12:14 -05:00
Scott Lahteine
571ced712d Add SDCARD_SORT_ALPHA options for LPC1768 2017-10-31 14:05:40 -05:00
rafaljot
778e4e4c23
Update InterruptVectors_Due.cpp 
const pfnISR_Handler *isrtab = get_relocated_table_addr();

What compiler do you use? Arduino 1.8.5 can't compile this "const".
 2017-10-31 15:00:06 +01:00
Scott Lahteine
cae8703e0d
Merge pull request #8181 from thinkyhead/bf2_fix_bootscreen_repeat 
[2.0.x] Only show custom bootscreen once
 2017-10-31 02:37:40 -05:00
Scott Lahteine
a516856df9 Only show custom bootscreen once 2017-10-31 01:47:30 -05:00
GMagician
727a403ba1 [2.0.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour (#8176) 
* [2.0.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour

NO_MOTION_BEFORE_HOMING should prevent XYZ movements only when homing is not done.
E axes should be allowed

* Update G0_G1.cpp

* Update G0_G1.cpp
 2017-10-30 22:50:22 -05:00
Alexey Shvetsov
577659cacf Basic support for Azteeg_X5_GT (#8139) 
* Basic support for Azteeg_X5_GT

Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>

* Add fan pins for AZTEEG X5 GT

Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>

* Fix endstop pins

* Add servo0 pin
 2017-10-30 16:01:20 -05:00
Scott Lahteine
0b02f9cc33
Merge pull request #8168 from thinkyhead/bf2_config_tweak 
[2.0.x] Apply Re-ARM SPI review items
 2017-10-30 15:49:50 -05:00
Scott Lahteine
04c0d9f3c3 Implement kinematic software endstops 2017-10-30 15:16:30 -05:00
Scott Lahteine
9f89b5d876 Fix for MAX_VFAT_ENTRIES sanity check 2017-10-30 15:11:47 -05:00
Scott Lahteine
2cdde08339 Apply items specified in code review 
Followup to #8122
 2017-10-30 15:03:07 -05:00
Scott Lahteine
34be5d33c0 The plural of 'axis' is 'axes' 2017-10-30 14:21:43 -05:00
Bob-the-Kuhn
6e5f13a5c2
Merge pull request #8122 from Bob-the-Kuhn/2.0.x-restore-Re-ARM-RepRap-Discount-Full-Graphics-fix-(partial-solution) 
2.0.x - Restore fix for garbaged display on Re-ARM with RepRap Full Graphics Smart Controller
 2017-10-30 13:16:16 -05:00
Bob-the-Kuhn
b7a66742dd tested 
add sort alpha section to other LPC1768 boards
 2017-10-30 13:01:19 -05:00
Jeffrey Li
bbc2e66634 Fix AZSMZ MINI pins for new LPC1768 pinmapping 2017-10-30 04:19:06 -07:00
Scott Lahteine
31e96935f7 Fix EXTRA_FAN_SPEED 
Addressing #8158
 2017-10-30 00:10:00 -05:00
Scott Lahteine
c94dce6b32
Merge pull request #8113 from thinkyhead/bf2_fixup_sd_reprint 
[2.0.x] Cleanup after SD Print Again, whitespace, tabs
 2017-10-29 23:57:51 -05:00
Scott Lahteine
ce1c9c0808 Tweak QUICK_HOME description 2017-10-29 23:48:13 -05:00
Scott Lahteine
12458cefc4 Remove 5s timer hack. Encoder pos is saved on print start! 2017-10-29 22:45:19 -05:00
Scott Lahteine
9a4cf11835 Remove return_to_status_ms hack, just use defer... 2017-10-29 22:45:18 -05:00
Scott Lahteine
8949c8c0a5 Move SD_REPRINT_LAST_SELECTED_FILE to ultralcd.cpp 2017-10-29 22:45:18 -05:00
Scott Lahteine
817175613a
Merge pull request #8157 from thinkyhead/bf2_anet_10_servo 
[2.0.x] Define a default SERVO0_PIN for Anet 1.0
 2017-10-29 19:55:00 -05:00
Scott Lahteine
723f2a77f6 Implement support for Dual X and Y endstops 2017-10-29 18:56:04 -05:00
Scott Lahteine
e04425281d Add Dual Steppers / Endstops to configs 2017-10-29 18:56:04 -05:00
Scott Lahteine
edff2c917b Cleanup for DIGIPOTS settings 2017-10-29 18:56:03 -05:00
Scott Lahteine
3e8754a38a Add/correct time units on planner vars / M205 B 2017-10-29 18:47:21 -05:00
Scott Lahteine
b2a48f1a04 Provide a SERVO0_PIN for non-standard LCD 2017-10-29 18:36:16 -05:00
Scott Lahteine
b232f39341 AVR: Hidden option to use 8s watchdog 2017-10-29 18:36:16 -05:00
Scott Lahteine
9d4cfd2013
Merge pull request #8142 from thinkyhead/bf2_fix_m303 
[2.0.x] Fix M303 thermal protection
 2017-10-29 04:46:34 -05:00
Scott Lahteine
eae0aea1e0 Fix M303 thermal protection 2017-10-29 04:30:50 -05:00
Luc Van Daele
a1a4fc277e (2.0.x) serious bug G33 (#8136) 
* (2.0.x) serious bug G33

* Revert config changes

This reverts commit 74b5a98223b7b7fb970d05b8541f4a079c3cfe56.
 2017-10-29 04:12:33 -05:00
Thomas Moore
325233b454 Fix automatic stepper assignment for X/Y/Z dual stepper drivers (#8130) 2017-10-28 19:45:07 -05:00
Thomas Moore
50b4f9cbf7 LPC1768 Pin Mapping and M43 cleanup (#8119) 
* LPC1768 M43 cleanup

* Update pinmapping.h to #define pins
 2017-10-28 19:44:54 -05:00
Scott Lahteine
6b1d1a818b Revert default BABYSTEP_MULTIPLICATOR to 1 2017-10-27 19:45:44 -05:00
etagle
ba8dc678f5 Arduino Due XON/XOFF implementation 
Alos includes emergency parser and configurable TX/RX buffers for Arduino Due.
 2017-10-27 03:24:23 -05:00
etagle
8d9c3cc2b7 Add a module for Due SRAM-based Interrupt Vector Table 
This is the ONLY way to be able to override ISRs stolen by the Arduino Runtime, such as Serial or USB device interrupts. This feature is needed so Arduino modules can be replaced and enhanced.
 2017-10-27 03:24:23 -05:00
etagle
c9bbef6380 Cosmetic fix for HAL_AVR/MarlinSerial.cpp 
Instead of using const char, it is better to use uint8_t
 2017-10-27 03:24:23 -05:00
LVD-AC
dcfc2503c2 G33 Autotune calibration update #10 2017-10-27 02:11:24 -05:00
Scott Lahteine
b338cafc65 Merge pull request #8111 from thinkyhead/bf2_fwretract_fix_oct26 
[2.0.x] Improved Firmware Retraction logic
 2017-10-27 02:02:06 -05:00
Scott Lahteine
ada90f7335 Clean up trailing spaces 2017-10-26 23:33:43 -05:00
Scott Lahteine
7fad26549b Concise SD_REPRINT_LAST_SELECTED_FILE description 2017-10-26 23:33:02 -05:00
Scott Lahteine
33f379fe88 Add some Polish language 
Thanks @SCiunczyk
 2017-10-26 22:49:04 -05:00
Scott Lahteine
daeff5a11a Tweak neopixel self-test 2017-10-26 22:47:07 -05:00
Scott Lahteine
0ceec1f166 Fix leveling_active_at_z warning 2017-10-26 22:22:54 -05:00
studiodyne
eb02f8c719 Improve FWRETRACT logic, add common sense 2017-10-26 22:22:54 -05:00
Scott Lahteine
bd78ca0ee3 Add M290 Babystepping 2017-10-26 20:44:43 -05:00
Scott Lahteine
ce5f0ec85a Bring STM32 example config up to date 2017-10-26 17:25:44 -05:00
Scott Lahteine
46e9eae159 Tweak to M100 config comment 2017-10-26 17:25:44 -05:00
Scott Lahteine
c45514f811 Merge pull request #8094 from thinkyhead/bf2_neopixel_led_parity 
[2.0.x] Bring NEOPIXEL_LED into parity with 1.1.x
 2017-10-26 17:24:38 -05:00
Bob-the-Kuhn
229a27a1c7 save FLASH by using reduced font for some languages 2017-10-26 16:08:17 -05:00
Roxy-3D
3f5f39576b Reprint option for last SD Memory card file (#8106) 
* Re-Print of same SD Memory Card file with single click

* Re-Print of same SD Memory Card file with single click
* This is the bugfix-v2.0.0 version of  https://github.com/MarlinFirmware/Marlin/pull/8104
 2017-10-26 15:50:18 -05:00
Thomas Moore
9e699811d2 Make LPC1768 pinmapping not specific to Re-ARM (#8063) 
* Merging early because of build failures.  See #8105

* Make LPC1768 pinmapping not specific to Re-ARM

* Add HAL_PIN_TYPE and LPC1768 pin features

* M43 Updates

* Move pin map into pinsDebug_LPC1768.h

* Incorporate comments and M226

* Fix persistent store compilation issues

* Update pin features

* Update MKS SBASE pins

* Use native LPC1768 pin numbers in M42, M43, and M226
 2017-10-26 13:37:26 -05:00
Scott Lahteine
3ac581eac9 Neopixel changes for parity with 1.1.x 2017-10-25 18:40:04 -05:00
jeffyl
7b3098bbd5 Add AZSMZ Mini (#8005) 
* Add AZSMZ Mini

* Remove tabs, adjust spacing

* Renumber boards to group by family

* Patch up spacing

* Tweak
 2017-10-25 01:16:54 -05:00
Scott Lahteine
e00ed10c4c GT2560 config MKS_MINI_12864 => SDSUPPORT 2017-10-25 01:12:48 -05:00
Scott Lahteine
10a5e4d80f Merge pull request #8078 from thinkyhead/bf2_mks_mini_lcd 
[2.0.x] Add MKS MINI 12864 support to GT2560
 2017-10-25 01:10:03 -05:00
Scott Lahteine
ee9b8bf0f1 Add MKS MINI 12864 support to GT2560 2017-10-24 19:15:41 -05:00
Scott Lahteine
f65fc7ffab Merge pull request #8044 from thinkyhead/bf2_mesh_consolidate 
[2.0.x] Simplify mesh bounds config
 2017-10-24 18:56:43 -05:00
Scott Lahteine
070cd34fe8 Merge pull request #8077 from thinkyhead/bf2_MKS_BASE_followup 
Clean up HAL trailing spaces, MKS SBASE pins
 2017-10-24 18:38:48 -05:00
Scott Lahteine
7f55d82fd1 Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h 2017-10-24 18:26:43 -05:00
Scott Lahteine
90a14b4f5b Clean up HAL trailing spaces, MKS SBASE pins 2017-10-24 18:20:23 -05:00
Thomas Moore
51fafccc16 [2.0.x] Enable hardware serial ports on LPC1768 (#8004) 
* Enable hardware serial ports on LPC1768

* Fix compilation errors with other HALs

* FIx order of includes in LPC1768 HAL main.cpp

* Add support for RX_BUFFER_SIZE and TX_BUFFER_SIZE options in Configuration_adv.h
 2017-10-24 17:28:33 -05:00
Scott Lahteine
580b6e9089 Apply physical limits to mesh bounds 2017-10-24 16:54:07 -05:00
Scott Lahteine
4e2baeb3e1 Update indentation, file-wrapping for Marlin 2.0.x 2017-10-24 16:54:06 -05:00
Scott Lahteine
60af705e6d Relocate SPI.h to the HAL folder 2017-10-24 16:54:06 -05:00
Scott Lahteine
46aae4c6e7 Merge pull request #8074 from thinkyhead/bf2_verbiage_like_8061 
Fix some config verbiage
 2017-10-24 15:25:12 -05:00
Scott Lahteine
3356d5a72d Merge pull request #8072 from thinkyhead/bf2_fix_M600 
[2.0.x] Fix position sync in M600 pause/resume
 2017-10-24 14:55:46 -05:00
Scott Lahteine
5f87324536 Fix some config verbiage 2017-10-24 14:53:42 -05:00
Scott Lahteine
272f9f65dc Fix some typos 2017-10-24 14:29:15 -05:00
studiodyne
8181220bfd Fix position sync in M600 pause/resume 2017-10-24 14:29:15 -05:00
cdedwards
6296ab2173 Add GFX overlay to UBL mesh edit (#8038) 
* Add GFX overlay to UBL mesh edit

Fixed misplaced HAS_TEMP_BED in dogm_bitmaps.h

rename _lcd_babystep_zoffset_overlay to _lcd_zoffset_overlay_gfx and move it out of BABYSTEP_ZPROBE_OFFSET to we can use it for over things. Add this function into UBL mesh edit screen.

update all Configuration.h to add ENABLE_MESH_EDIT_GFX_OVERLAY

* Add Sanity to UBL  insanity

Need to check for DOGLCD  otherwise error out.
 2017-10-24 14:14:03 -05:00
Roxy-3D
72156a2029 change to better (more clear) names (#8050) 
set_destination_to_current() changed to set_destination_from_current()

set_current_to_destination() changed to set_current_from_destination()
 2017-10-21 11:42:26 -05:00
Scott Lahteine
0cb423b5b3 Apply consistency for other configs 2017-10-21 00:41:51 -05:00
Scott Lahteine
8c78f8f790 Add Makeboard MINI for Micromake C1 2017-10-21 00:41:51 -05:00
Scott Lahteine
1fbb307aaf Merge pull request #8021 from thinkyhead/bf2_scroll_longnames 
[2.0.x] Add SCROLL_LONG_FILENAMES to reveal longer filenames
 2017-10-20 21:33:54 -05:00
Scott Lahteine
3d2b2eb1ca Prevent SDCARD_SORT_ALPHA from exploding 2017-10-20 19:13:21 -05:00
Scott Lahteine
783ddf9691 Add SCROLL_LONG_FILENAMES option 2017-10-20 19:13:21 -05:00
Roxy-3D
5439358281 Basic UBL operations working on 32-bit platforms (#8024) 
* 32-bit work for UBL

* Update FT i3-2020 reference file
 2017-10-19 10:44:45 -05:00
Scott Lahteine
9e5cbf0198 BQ should set this in its config, and does 2017-10-18 22:56:03 -05:00
Scott Lahteine
348e5e3109 Simplify Cartesian probing boundaries 
Followup to #8012
 2017-10-18 17:14:32 -05:00
Luc Van Daele
3986a84f77 boolval revisited (#8016) 2017-10-18 14:03:17 -05:00
Roxy-3D
572cf0ec95 UBL able to generate mesh and save and load it on 32-bit platforms (#8015) 
* Get UBL Mesh Generation, Mesh Save & Mesh Load working with 32-Bit platforms

* clean up read_data() and write_data() for non-LPC1768 HAL's

* Get read_data() and write_data() return codes consistent

All HAL's read_data() and write_data() return false if they succeed.

* Get read_data() and write_data() return codes to be consistent

Make read_data() and write_data() return true if an error happens.

* Say UBL is now checked out on machine types in default Configuration.h file.
 2017-10-18 14:00:29 -05:00
Thomas Moore
67cc29cd3c Update UBL mesh boundaries to accomidate beds centered at 0, 0 (#8012) 2017-10-18 10:03:30 -05:00
Roxy-3D
6cb26c98c8 Fix Baby Stepping on 32-Bit platforms (#8001) 
Also, Max7219 debug code was used for this effort.   It has been
improved and hardened.
 2017-10-16 16:29:37 -05:00
Scott Lahteine
3b7b0492f8 Merge pull request #7993 from jeffyl/bugfix-2.0.x 
[2.0.x] Proper support for AZSMZ 12864 LCD on SmartRAMPS
 2017-10-16 14:12:29 -05:00
Jeffrey Li
26531f2715 Add lcd to all sample configs 2017-10-16 03:24:25 -07:00
Scott Lahteine
ce48403a0b Add EXTRA_FAN_SPEED feature 
Based on #7883 by @studiodyne
 2017-10-16 02:34:13 -05:00
Jeffrey Li
eeb4611606 Add proper support for the AZSMZ 12864 LCD on a SMART RAMPS 2017-10-16 00:33:07 -07:00
Scott Lahteine
c46189e429 Fix UBL+Delta segmented feedrate 
Based on #7948
 2017-10-15 16:31:09 -05:00
Scott Lahteine
5c4f3e0107 Add LCD_SET_PROGRESS_MANUALLY 2017-10-15 03:05:29 -05:00
Scott Lahteine
014a83fe09 Merge pull request #7984 from thinkyhead/bf2_micromake_c1 
[2.0.x] Micromake C1 Configurations, Unaccented French
 2017-10-14 21:19:32 -05:00
Scott Lahteine
bc7df0188e Add Micromake C1 configurations 2017-10-14 20:28:12 -05:00
Scott Lahteine
34a261416f Add unaccented French language 2017-10-14 20:28:12 -05:00
Scott Lahteine
e587f0893c Define AVR_ATmega2560_FAMILY_PLUS_70 in Conditionals 2017-10-14 19:05:32 -05:00
Scott Lahteine
fd128b3c93 Fix some AVR HAL code style 2017-10-14 19:05:10 -05:00
Scott Lahteine
799360c576 Enhance Teensy/RAMPS pins files 2017-10-14 18:44:20 -05:00
Scott Lahteine
d3e5a22a5d Add MIN_SOFTWARE_ENDSTOP_[XYZ] to example configs 2017-10-14 18:44:20 -05:00
Jeff Eberl
b206f70693 Split the software endstop capability by axis. 2017-10-14 18:44:20 -05:00
Scott Lahteine
ec69e97bda Merge pull request #7974 from jeffyl/bugfix-2.0.x 
Fix include path for VIKI
 2017-10-14 17:38:42 -05:00
Morten
91e28edda6 [2.0.x] Add new board: MKS Sbase (#7945) 
* Add files via upload

* Add files via upload

* Add files via upload

* Checked LCD / edited / revised pins_MKS_BASE.h

As requested :)

* Delete Configuration_adv.h

* Delete Configuration.h

* Deleted /Marlin/Marlin/src/config/examples/MksSbase/*.* and moved them to /Marlin/Marlin/src/config/examples/Mks/Sbase/*.*

* Add files via upload
 2017-10-14 09:44:18 -05:00
Jeffrey Li
3c8a3a02ba Fix include path for VIKI 2017-10-14 04:06:17 -07:00
Scott Lahteine
4586acad8c Merge pull request #7959 from alexxy/bugfix-2.0.x 
Python isnt always python2
 2017-10-14 05:02:07 -05:00
Scott Lahteine
497f86453e Merge pull request #7964 from gallynero/patch-2 
fix 'axis_unhomed_error' not defined error
 2017-10-14 05:00:58 -05:00
Scott Lahteine
c0dddd4233 Tweaks to tool_change, GcodeSuite::T() 2017-10-14 02:53:19 -05:00
Scott Lahteine
ca66574062 ADC sensor fix inspired by 'Evgen2' on Twitter 2017-10-14 02:28:13 -05:00
Scott Lahteine
1344ca4b2f UBL no longer needs ubl_state 2017-10-14 02:18:32 -05:00
Scott Lahteine
8dd08425fd Improve LCD leveling edits 2017-10-14 02:18:31 -05:00
Scott Lahteine
3e3911fb81 Use planner.leveling_active for all leveling systems 2017-10-14 02:18:31 -05:00
Scott Lahteine
32c607ffe2 Ensure fade factor is recalculated if fade height changes 2017-10-14 02:18:31 -05:00
Scott Lahteine
ca1e47375c Move fade_scaling_factor_for_z to Planner 2017-10-14 02:18:31 -05:00
Scott Lahteine
9a930ebec2 Make leveling_is_active a macro 2017-10-14 02:18:31 -05:00
Scott Lahteine
58abc66c1d Tweak bed leveling conditionals 2017-10-14 02:18:31 -05:00
Scott Lahteine
1adb5a6a48 Remove obsolete UBL z_offset 2017-10-13 08:22:46 -05:00
gallynero
3619a4cbea fix 'axis_unhomed_error' not defined error 
Fix 'axis_unhomed_error' not defined error when pause with unhomed status
 2017-10-13 09:08:02 +02:00
Alexey Shvetsov
12d212d1b4 Python isnt always python2 
So now this script is compatible with both python versions 2 and 3

Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
 2017-10-13 01:39:06 +03:00
Bob-the-Kuhn
4e3ee845b9 config_adv (#7941) 
get rid of twi.h

move to board files
 2017-10-11 15:42:24 -05:00
Roxy-3D
0e260c6c1d Get FolgerTech i3-2020 working again with 32-bit platforms (#7944) 
Setup FolgerTech i3-2020 Configuration files as a reference platform for
32-Bit work.

Also fix MAX7219 debug lights on 32-bit platforms.
 2017-10-11 15:23:04 -05:00
Bob-the-Kuhn
26bfae58d4 MPC4451 I2C support 2017-10-11 00:30:41 -05:00
Scott Lahteine
1f5c432e29 Merge pull request #7920 from thinkyhead/bf2_neopixel_full 
[2.0.x] Move FILAMENT_RUNOUT_SENSOR to a feature
 2017-10-10 03:05:00 -05:00
Scott Lahteine
732e87e83c Merge pull request #7892 from GMagician/Serial-double-echo-fix 
[2.0.x] Serial double echo fix
 2017-10-10 02:42:16 -05:00
Scott Lahteine
f8e8fcb978 Move FILAMENT_RUNOUT_SENSOR to a feature 2017-10-10 02:37:42 -05:00
Slawomir Ciunczyk
a11e6a1022 Different NEOPIXEL types 
Same as #7728 but for 2.0.x,
Lot of cleanup and remove references in whole code to other "LED files" than leds.h. Now will be much easier to add next drivers/libraries. e.g. FastLED. But bad news, currently FastLED is suporting only RGB devices (no RGBW)
 2017-10-10 02:17:36 -05:00
Scott Lahteine
b30b55307c Merge pull request #7909 from thinkyhead/bf2_goodbye_legacy_advance 
[2.0.x] Remove legacy ADVANCE feature
 2017-10-10 00:31:18 -05:00
Scott Lahteine
1d04197f2f Merge pull request #7916 from thinkyhead/bf2_probeless_ubl 
[2.0.x] Allow UBL G29 and G26 to build without a probe
 2017-10-10 00:30:27 -05:00
Thomas Moore
9b0ee53b12 Use segmented moves when moving axis from LCD 2017-10-09 23:25:43 -05:00
Scott Lahteine
442669d23c Allow UBL to build without a probe 2017-10-09 18:57:41 -05:00
Scott Lahteine
20ebe218c8 Tweaks to VIKI lcd support 2017-10-09 17:01:07 -05:00
Scott Lahteine
09fa34a9e1 Modernize configs 2017-10-09 16:18:10 -05:00
Scott Lahteine
560d366b80 Move VIKI SCK/MOSI pins fix to Conditionals_POST.h 2017-10-09 16:13:49 -05:00
Scott Lahteine
e9bcb9d048 Add 4 new LCD displays 2017-10-09 15:58:02 -05:00
Scott Lahteine
03f4891fb9 Remove legacy ADVANCE feature 2017-10-09 04:25:18 -05:00
GMagician
546f02c6f4 [2.0.x] Addressing #7896 
Compiler error, added char c variable
 2017-10-08 23:16:35 +02:00
GMagician
eb96d37da0 Serial double echo fix 
Fix double character sent when TX buffer size is 0 on mega2560
 2017-10-07 22:20:00 +02:00
Scott Lahteine
deeea98d22 LCD filename already concatenated 2017-10-07 15:16:05 -05:00
Scott Lahteine
a058638d11 Merge pull request #7875 from thinkyhead/bf2_fill_eeprom_dat_ff 
[2.0.x] Update LPC persistent store to initialize eeprom.dat with FF
 2017-10-07 15:13:21 -05:00
Scott Lahteine
ae1a18d0a1 LCD filename already concatentated 2017-10-07 15:10:15 -05:00
Scott Lahteine
12aa1b999a Fix display issue with SD_SORT_ALPHA cached names 2017-10-07 15:08:08 -05:00
Dave Johnson
9d0e4ea3d5 [2.0.x] Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled (#7879) 
* Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled

If HOME_AFTER_DEACTIVATE, there is no need to warn on LCD since printer will home prior to starting print.  Saves 60 bytes PROGMEM on AVR with U8g panel.

* Reduce lines used

* Reduce lines used
 2017-10-07 15:02:55 -05:00
Scott Lahteine
8315a8a716 Apply fixes for DUE 
Alternative to #7882. If F_CPU is greater than 1000 it can be evenly divided by 8. Over 10000, 16; over 100000, 32; over 1 million, 64; etc.
 2017-10-07 14:31:18 -05:00
Scott Lahteine
4b36a542e0 Merge pull request #7876 from thinkyhead/bf2_hotend_messages 
[2.0.x] Addressing #7612
 2017-10-07 13:37:43 -05:00
Unknown
12730c1303 [2.0.0] Resolve USE_CONTROLLER_FAN compile errors 
Add to controllerfan.cpp:
#include "../module/stepper_indirection.h"
#include "../module/temperature.h"
 2017-10-07 05:26:36 -07:00
Scott Lahteine
7fb3343bda [2.0.x] Addressing #7612 
Change "extruder" to HOTEND in sanity error messages
 2017-10-07 02:27:26 -05:00
victorpv
8998f31ee1 Update LPC persistent store to initialize eeprom.dat with FF 
This change initialize any data in eeprom.dat beyond the current file size to FF.
That way if eeprom.dat is deleted and created again, it doesn't take the old values or random ones, but rather starts with FF in all positions as a real brand new or erased eeprom.dat
Currently if you delete eeprom.dat and restart the board, the new file is created in the same sector with the same content, since FAT does not actually delete the data, just marks the sector as free. I tested by deleting the file, and then rebooting the board, and checking the file content.
The change can be tested in the same way, deleting, rebooting the board, and then the new content should be all FF.

If an eeprom file already exist with data on it, but smaller than E2END, it will be padded with FF on first access, so it will not have random or old content appended.
 2017-10-07 02:18:42 -05:00
Scott Lahteine
2aa22c5a5e Merge pull request #7874 from thinkyhead/bf2_anet_encoder_pulses 
[2.0.x] Fixing ANET encoder pulses
 2017-10-07 01:21:23 -05:00
Scott Lahteine
f99d1dedae Fixing #7833 
Derived from #7873
 2017-10-07 00:10:05 -05:00
Scott Lahteine
de84f57a9c Patch SD file draw bug 2017-10-06 23:57:11 -05:00
Scott Lahteine
ef90b49fff Remove extra NEWPANEL settings in Conditionals_LCD.h 2017-10-06 23:56:58 -05:00
Scott Lahteine
67a7dd9792 Merge pull request #7866 from thinkyhead/bf2_finally_G33_is_done 
[2.0.x] Apply G33 updates
 2017-10-06 16:03:26 -05:00