Commit Graph

11327 Commits

Author SHA1 Message Date
AnHardt
f56968ba0b New Continuous Filament Mixer (#12098) 2018-10-16 03:38:57 -05:00
Ludy
2d2cd628c6 Update German language (#12094) 2018-10-16 02:59:04 -05:00
Scott Lahteine
84b59d58fb Clean up whitespace 2018-10-16 02:02:20 -05:00
swilkens
06e2afe8e0 [2.0.x] Reduce HOMING_FEEDRATE_XY for Ender 3 (#12105)
Homing on the Ender 3 with HOMING_FEEDRATE_XY set to 50*60 was shown (#12074) to cause the end-stop micro-switches to bottom out, causing the carriage for both X and Y axis to physically crash into the micro switch. Reducing the homing speed prevents the switches from bottoming out.
2018-10-16 01:51:47 -05:00
TheSFReader
af939c158a Option for G0 to have a separate feedrate (#12089) 2018-10-16 01:49:51 -05:00
Scott Lahteine
3d5be2ea4b
Merge pull request #12093 from p3p/pr_bf2_pulloutlpcframework
[HAL][LPC176x] Pull out framework, improve build, fix things
2018-10-14 17:57:21 -05:00
Christopher Pepper
e5b4bf22d4 Remove debug output from flash persistent store implementation 2018-10-14 18:43:48 +01:00
Christopher Pepper
42fb7c14b0 Update the sdcard usb sharing config and apply to Re-ARM 2018-10-14 18:43:48 +01:00
Christopher Pepper
61fbd0aa59 update lpc builds to use platformios ldf limited to strict mode
need to identify why incompatible libraries are still included without specifically disallowing them
2018-10-14 18:43:48 +01:00
Christopher Pepper
254b68fe2c servo update 2018-10-14 18:43:48 +01:00
Andy Shaw
870bfd08f5 usb and sdcard sharing improvements
* Add traceback after watchdog timeout

Add the cpability to perform a traceback following a watchdog timeout.

* Enhanced hardware SPI

Allow use of either SSP0 or SSP1.
Ensure that no data is left in I/O buffers after calls to enable sharing of SSP hardware.

* Make flash emulation of eeprom the default

Make use of flash for eeprom storage the default. This means that usage of eeprom will not cause USB drive mount/unmount operations.

* Allow sharing of SD card

SD card I/O operations from the USB stack take place in idle loop, rather than at interrupt time. Allowing sharing of the SPI bus.

New configuration options to allow usage of the SD card to be specified.

* Fix problem with hardware SPI pins
2018-10-14 18:43:48 +01:00
Christopher Pepper
5ddf52d58e [HAL][LPC176x] Pull out framework into separate repository
Framework and build platform now located at https://github.com/p3p/pio-framework-arduino-lpc176x and https://github.com/p3p/pio-nxplpc-arduino-lpc176x respectively

fix mkssbase leds

move hardware serial

remove hardware/software serial

Hardware Serial extraction

HardwareSerial ISRs

fix disabled serial2 causing Serial object to link

move usb devices out to framework

separate out adc/pwm peripheral function from hal.cpp

fix includes

remove unused pwm init

move adc

HAL header update

templated filtered adc

LPC1769 platform
2018-10-14 18:43:48 +01:00
Roman Moravčík
213e94bce2 [2.0.x] Updated slovak translation (#12059) 2018-10-14 02:15:15 -05:00
Karl Andersson
a40458405a Fix datasize error when FWRETRACT is disabled (#12086) 2018-10-14 02:14:34 -05:00
Scott Lahteine
951b25163e
Extend M217 with configurable park/raise (#12076) 2018-10-13 23:08:20 -05:00
Kevin Velickovic
ea13a77dcb Fixed Z-Probes NO/NC for Anycubic Kossel (#12083) 2018-10-13 20:34:56 -05:00
N95JPL
ab9d5eb38d Add Bootscreen Animation (#12077) 2018-10-12 22:11:20 -05:00
Scott Lahteine
8653cedee4 Improve use_example_configs script 2018-10-12 21:54:09 -05:00
Scott Lahteine
26208a5c2f Clean up some boot screens 2018-10-12 18:56:39 -05:00
Scott Lahteine
9b6be0ae0f Fix lite status screen SD % 2018-10-12 17:02:59 -05:00
Scott Lahteine
af3bf6c956 Tweak config spacing 2018-10-12 16:09:27 -05:00
Scott Lahteine
a44ef27897 Outdent singlenozzle toolchange code 2018-10-12 15:19:03 -05:00
Scott Lahteine
d338e4d875 Fix singlenozzle toolchange cold extrusion test 2018-10-12 15:15:25 -05:00
Roxy-3D
25b980dddb
Remove erroneous Pin 12 definition
There is no switchable Power Supply.   Don't put it on Pin 12.   
(Pin 12 is actually FAN1)
2018-10-12 13:45:04 -05:00
Scott Lahteine
ddaef1a60c Clean trailing whitespace 2018-10-11 21:40:55 -05:00
Scott Lahteine
49d4ed4d3f
Merge pull request #12063 from thinkyhead/bf2_sensitive_pins
Add MS3 pins. Optimize SENSITIVE_PINS.
2018-10-11 01:10:34 -05:00
Scott Lahteine
1407afad73 Move SENSITIVE_PINS to its own file 2018-10-11 01:10:11 -05:00
Scott Lahteine
45e738876a Add stepper MS3 support
Co-Authored-By: TheLongAndOnly <thelongandonly@users.noreply.github.com>
2018-10-11 01:10:11 -05:00
Giuliano Zaro
d43d4e4219 Refactor PRINTER_EVENT_LEDS, apply to M303 (#12038)
Co-Authored-By: Giuliano Zaro <gmagician@users.noreply.github.com>
2018-10-10 21:25:43 -05:00
Giuliano Zaro
d8d76cd2ba [2.0.x] Italian language update (#12060) 2018-10-10 20:13:10 -05:00
Scott Lahteine
e8d2cf4fb5 EEPROM followup (tmc_stepper_current_t) 2018-10-10 17:25:45 -05:00
Scott Lahteine
50cbca4c55 Hide some menu items when busy 2018-10-10 17:18:33 -05:00
InsanityAutomation
3cb5517ddb Make singlenozzle tool-change honor no_move (#12056)
...Set no move earlier so it applies
2018-10-10 16:49:59 -05:00
InsanityAutomation
d332fcb8fa Fix firmware-retract compile errors (#12061) 2018-10-10 16:46:08 -05:00
Scott Lahteine
43940d59ed Fix trailing spaces 2018-10-10 16:24:35 -05:00
InsanityAutomation
b2c1cd7eda Allow cold change of active extruder (#12055)
Followup to #11994
2018-10-10 09:57:48 -05:00
Scott Lahteine
d556dc1865
Fix and improve EEPROM storage (#12054)
* Clean up Temperature PID
* Improve EEPROM read/write/validate
* Group `SINGLENOZZLE` saved settings
* Group planner saved settings
* Group filament change saved settings
* Group skew saved settings
* Group `FWRETRACT` saved settings
2018-10-10 09:45:20 -05:00
Scott Lahteine
9b5c1a5e77 Fix EEPROM checksum bug
Addressing #12048
2018-10-10 06:14:58 -05:00
Scott Lahteine
272d4a5167 Apply #pragma once 2018-10-10 02:57:01 -05:00
Scott Lahteine
07d33849b0 Fix unused var warning, apply ENABLED 2018-10-09 21:31:28 -05:00
Hannes Brandstätter-Müller
a3e8cb1e44 [2.0.x] Ender-4 small improvements in Configuration (#11843) 2018-10-09 20:58:22 -05:00
Scott Lahteine
cf5284cdf2
Add SD Firmware Update capability (#12043)
Co-Authored-By: timoxd7 <timoxd7@users.noreply.github.com>
2018-10-09 20:00:47 -05:00
Scott Lahteine
0bd54392b7 Use uint8_t in EEPROM code 2018-10-09 19:00:01 -05:00
Scott Lahteine
ce82015d5f Fix include in G80 2018-10-09 17:24:56 -05:00
Marcio Teixeira
cef1de89d0 Fixed incorrect axis index. (#12051) 2018-10-09 16:59:34 -05:00
Scott Lahteine
d52deeb15a Adjust Travis CI tests 2018-10-09 16:48:43 -05:00
Marcio Teixeira
d6d48e63fb Allow #defined TYPE arg to ultralcd menu macros (#12041)
Previously, it was not possible for the TYPE argument to ultralcd menu macros to itself be a #defined value. This made it difficult to create variables to set many related menu items to a common precision that could be easily changed.
2018-10-08 20:01:00 -05:00
Emilio Moretti
2ef7175b42 Update Ender-2 BED_MAXTEMP (#12042)
Also added details to the README to make sure the Ender-2 status is properly documented.
2018-10-08 19:57:44 -05:00
Scott Lahteine
7f94ca950e Add Marlin icons graphics file 2018-10-08 19:53:01 -05:00
Scott Lahteine
5f6aabccbe Tweak M48 spacing 2018-10-08 19:11:25 -05:00