bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
10,465 Commits 1 Branch 4 Tags 151 MiB
931ab4ec40
Commit Graph

8727 Commits

Author SHA1 Message Date
Scott Lahteine
683dc24e0f When homing with Z probe bump at Z_PROBE_SPEED_SLOW 2018-04-28 08:50:23 -05:00
Scott Lahteine
8db7fb226a Fix M420 C for UBL 2018-04-28 08:14:20 -05:00
Scott Lahteine
ed8d2bc225 Clean up some endstop inverting examples 2018-04-28 08:04:43 -05:00
Scott Lahteine
c7305be4d2 Fix some endstop inverting settings 2018-04-28 08:04:33 -05:00
Bob-the-Kuhn
f973ff49ae [2.0.x] MKS SBASE - Separate SD_DETECT for LCD and on-board SD cards (#10557) 2018-04-28 07:24:07 -05:00
Scott Lahteine
5ac226aa93 Further cleanup of inline delays 2018-04-27 19:22:22 -05:00
Marcio Teixeira
724e9f56c8 Removed "const" to match parser. (#10548) 2018-04-27 17:48:52 -05:00
Giuliano
2e1939e85c [2.0.x] report error on unsupported commands (#10553) 
Raise an error when an unknown/unsupported G/M command is requires.

This will address #10546
 2018-04-27 17:40:27 -05:00
Scott Lahteine
a474a7e675 Correct AVR_ATmega328_FAMILY macro 
…as with #10540

Co-Authored-By: per1234 <per1234@users.noreply.github.com>
 2018-04-27 03:13:46 -05:00
Scott Lahteine
f790b4bc0a Reorganize some conditionals 2018-04-27 02:23:11 -05:00
Scott Lahteine
a51ba6e3f6 Fix ABL grid bounds test for Delta/SCARA 
Addressing #10538
 2018-04-27 02:23:10 -05:00
Scott Lahteine
df6bc812b5 Fix disable of Z_HOMING_SENSITIVITY for HOMING_Z_WITH_PROBE 
As pointed out in #10532
 2018-04-27 02:23:10 -05:00
Scott Lahteine
63e0b36f8b Fix G29_RECOVER_COMMANDS typo 2018-04-27 02:23:10 -05:00
Scott Lahteine
f83361a814 Apply const to tmc_sensorless_homing 2018-04-27 02:23:10 -05:00
Scott Lahteine
212e52e485 Basic delay for Max7219 on ARM 2018-04-27 00:41:29 -05:00
Scott Lahteine
7b6e742436 Wrap delay macros in do{}while(0) 2018-04-26 18:18:23 -05:00
Karl Andersson
58ca3be1ec delayMicroseconds() cannot be called in critical section (#10535) 
on the STM32 platform
 2018-04-26 14:31:01 -05:00
Bob-the-Kuhn
00dfaae8df [2.0.x] Platformio - automate build & environment selection (#10503) 2018-04-26 02:42:06 -05:00
Scott Lahteine
299c4fed42 Undefine PIDTEMPBED without a bed heater 2018-04-26 01:30:10 -05:00
Scott Lahteine
456cf971af HAL FastIO cleanup and fixes 2018-04-26 00:40:16 -05:00
J.C. Nelson
5b5e322356 Set Interrupt Priorities and Grouping for STM32F103. (#10517) 2018-04-26 00:21:16 -05:00
Scott Lahteine
0e450df6a2 MKS OLED support for RUMBA 
Based on #10519

Co-Authored-By: Alex <alex18881@users.noreply.github.com>
 2018-04-25 23:00:44 -05:00
Scott Lahteine
2578996631
[2.0.x] Emergency parser for multiple serial ports (#10524) 2018-04-25 20:58:00 -05:00
Scott Lahteine
8cc31d1b2e Cleanup to emergency parser 
Followup to #10516
 2018-04-25 06:54:37 -05:00
Chris Pepper
2242b98248 [LPC176x] Emergency Parser Feature (#10516) 2018-04-25 06:44:26 -05:00
Scott Lahteine
eef0248a1c
Add M420 C to adjust the whole mesh (#10522) 2018-04-25 06:43:45 -05:00
Eduardo José Tagle
c1e5ebbc1e [2.0.x] AVR: Atomic bit set and clear of upper pin ports without critical section (#10502) 
* AVR: Atomic bit set and clear

The critical section can be dropped, saving 3 cycles per access. Also simplified pin toggling for all ports.
 2018-04-24 13:45:43 -05:00
Marcio Teixeira
02a711c4d6 [2.0.x] Fix crash upon repeated calls to process_subcommands_now_P (#10509) 2018-04-24 13:44:22 -05:00
Scott Lahteine
a3ce8a3fcd Add sanity checks for EMERGENCY_PARSER 2018-04-24 09:24:26 -05:00
Scott Lahteine
f06c3c38b9 Fix M0_M1 with no LCD 2018-04-24 09:22:05 -05:00
Scott Lahteine
c82dd5129f Revert potentially-not-redundant UBL test 
Response to #10435
 2018-04-24 08:04:13 -05:00
Scott Lahteine
9789c1c719 Fix current_temperature_chamber compile error 
Fix #10505
 2018-04-24 07:55:58 -05:00
Eduardo José Tagle
0c428a66d9 Proper AVR preemptive interrupt handling (#10496) 
Also simplify logic on all ARM-based interrupts. Now, it is REQUIRED to properly configure interrupt priority. USART should have highest priority, followed by Stepper, and then all others.
 2018-04-23 22:05:07 -05:00
Scott Lahteine
f423e54f77 Strip trailing spaces 2018-04-23 18:00:43 -05:00
Scott Lahteine
8177c4334e
Merge pull request #10498 from xC0000005/MalyanLCDFix 
Fix overridden Malyan LCD functions
 2018-04-23 17:22:43 -05:00
Scott Lahteine
cb46cb8480
Add HAS_HEATED_BED conditional (#10495) 2018-04-23 17:13:01 -05:00
Marcio Teixeira
10a25f733e Add SENSORLESS_HOMING to Archim 2.0 (#10500) 2018-04-23 17:11:33 -05:00
xC0000005
24d23ce49b Fix function definitions for Malyan LCD 2018-04-23 16:56:37 -05:00
Alexey Shvetsov
ad58b626a3 Fix pin mappings for Viki2 on Azteeg X5 GT (#10487) 2018-04-22 18:41:30 -05:00
Scott Lahteine
9e07df5c1b
Extra options for LEVEL_BED_CORNERS (#10483) 2018-04-22 02:50:48 -05:00
Scott Lahteine
1c3d49afe0 Fix G28 with Z_AFTER_PROBING 
Fix #10476
 2018-04-22 01:23:26 -05:00
Scott Lahteine
b6747c742a Cleanup AZTEEG_X5_GT pins for VIKI 
What should the SD detect and SDSS pins be? Followup soon on #8138
 2018-04-22 01:19:43 -05:00
Scott Lahteine
023385ca59
Merge pull request #10479 from thinkyhead/bf2_creality_power_loss_resume 
[2.0.x] Creality3D Power-Loss Recovery
 2018-04-22 00:17:44 -05:00
Scott Lahteine
3396671011
[2.0.x] Reset LCD status to fallbacks (#10470) 
* Remove obsolete strings
* Tweak some static consts
* Reset LCD status to fallbacks
 2018-04-22 00:16:30 -05:00
Scott Lahteine
d58450c82a Russian language update 
Co-Authored-By: anton-piliugin <34044202+anton-piliugin@users.noreply.github.com>
 2018-04-22 00:14:20 -05:00
Scott Lahteine
11ab017dd0 Creality3D Power-Loss Recovery 2018-04-21 21:56:50 -05:00
Scott Lahteine
594d6f9efd Add POWER_LOSS_RECOVERY to example configs 2018-04-21 19:40:46 -05:00
Scott Lahteine
7dcd0a1cff Add R parameter to G28 to specify pre-raise 2018-04-21 19:07:48 -05:00
Scott Lahteine
2f4b4d6076 Add Stopwatch::resume method 2018-04-21 19:06:05 -05:00
Scott Lahteine
a90cbc6339
[2.0.x] Wait for bed heaters between probing (#10472) 2018-04-21 15:43:21 -05:00
Scott Lahteine
a0dac95d25
Merge pull request #10460 from thinkyhead/bf2_trigorilla_14 
[2.0.x] Split TRIGORILLA into 1.3 and 1.4
 2018-04-20 18:25:40 -05:00
Scott Lahteine
f0cbf3d432 Correction to sanity check 2018-04-20 18:16:27 -05:00
Scott Lahteine
d8a8eec6ea Add THERMAL_PROTECTION capability 
Based on #10465

In response to `M115` the firmware reports if Thermal Protection is enabled (1) or not (0). This information can be used by software such as OctoPrint (more precisely the Printer Safety Check plugin) to warn users when Thermal Protection is not enabled in the firmware.

Co-Authored-By: andrivet <sebastien@advtools.com>
 2018-04-20 16:50:50 -05:00
Scott Lahteine
186d71b361 Complete CREALITY_ENDER revert 2018-04-20 16:17:25 -05:00
Scott Lahteine
11ef432476 Match Makefile to boards.h 2018-04-20 16:13:50 -05:00
Scott Lahteine
2be5fe5ddf Split TRIGORILLA into 1.3 and 1.4 2018-04-20 16:12:25 -05:00
Scott Lahteine
80e29492c6 TRIGORILLA => TRIGORILLA_13 2018-04-20 16:12:25 -05:00
Scott Lahteine
dea686cf55
Define short pin names in fastio for STM32 (#10461) 2018-04-20 14:54:35 -05:00
Scott Lahteine
65a6a86d19 Don't report point 0 in MBL G29 2018-04-20 13:12:50 -05:00
Scott Lahteine
6faa93d787 Add G29_RETRY_AND_RECOVER to example configs 2018-04-19 19:45:53 -05:00
Marcio Teixeira
5cc7916e69 Add G29_RETRY_AND_RECOVER feature 
- Add an option to retry G29, optionally executing a G-code procedure after each failed probe.
 2018-04-19 19:45:53 -05:00
Scott Lahteine
78ea4871f9 Fix up enqueue now functions 
…and apply to MALYAN_LCD.
 2018-04-19 19:45:53 -05:00
Roxy-3D
23635c2b64
Update ubl_motion.cpp 
Restore necessary and needed loop termination logic.
 2018-04-19 12:04:35 -05:00
Scott Lahteine
8ca3c43d73 Updated language_data spacing, headers 2018-04-19 06:16:16 -05:00
Scott Lahteine
184c077c58 Correct includes (u8g.h) and spelling 2018-04-19 06:16:16 -05:00
Yunhui Fu
627348b46c move the TALL_FONT_CORRECTION to language files 2018-04-19 06:16:16 -05:00
Yunhui Fu
77bc653524 Use X windows 6x12 bitmap font to support western languages. 2018-04-19 06:16:15 -05:00
Yunhui Fu
d81649b365 Update language data for sk. 2018-04-19 06:15:19 -05:00
Yunhui Fu
41839746a2 Removed unused macros 2018-04-19 06:15:19 -05:00
Scott Lahteine
4f184ba5da
[2.0.x] Add BOARD_MKS_BASE_15 with digital micro-stepping (#10454) 
* Add BOARD_MKS_BASE_15 with digital micro-stepping
* Rename MKS_13 to MKS_GEN_13
 2018-04-18 22:58:43 -05:00
Scott Lahteine
ad6baa5c9d Fix for UBL set_bed_leveling_enabled 2018-04-18 00:14:48 -05:00
Scott Lahteine
df2f24617b Use 0 as the bed position (not Z_MIN_POS) 2018-04-17 20:32:56 -05:00
Karl Andersson
428c54f2ad [2.0.x] HAL for STM32F4 (#10434) 2018-04-17 17:33:29 -05:00
Chris Pepper
744bcaee61 [2.0.x] Fix problems compiling with Arduino IDE (#10441) 
* Fix problems compiling u8glib utf8 support on Arduino
* Change header in auto-generated font data
* Change include in font gen scripts
 2018-04-17 17:28:55 -05:00
GMagician
20772492aa Fix compile warnings in AVR fastio.h (#10440) 2018-04-17 17:26:57 -05:00
Scott Lahteine
f57a008c58
Merge pull request #10443 from thinkyhead/bf2_fix_and_improve 
[2.0.x] Improve UBL mesh report, M420 V T, M421 N, and…
 2018-04-17 16:59:31 -05:00
Scott Lahteine
89b1580587 Fix compile error in tmc_status 2018-04-17 16:13:28 -05:00
Scott Lahteine
52c024e260 M221 with no parameters report flow 2018-04-17 16:06:25 -05:00
Scott Lahteine
01b01f6dfd Tweak fwretract.retract debug, comments 2018-04-17 16:05:25 -05:00
Scott Lahteine
e4acd2c40e One fewer compare in _lcd_move_xyz 2018-04-17 16:03:15 -05:00
Scott Lahteine
e05c825a05 Update position for UBL non-segmented activate/deactivate 2018-04-17 16:02:02 -05:00
Scott Lahteine
d462be6de6 Try FIXFLOAT rounding based on sign 2018-04-17 15:59:04 -05:00
Scott Lahteine
39c6f65ce7 Ignore LCD_BED_LEVELING with UBL 2018-04-17 15:57:44 -05:00
Scott Lahteine
0746aff595 Improve UBL mesh report. Add M420 T, M421 N 2018-04-17 15:52:56 -05:00
Scott Lahteine
3c826e5d05 Prevent delay when power is already on 
Fix #10410
 2018-04-17 04:34:31 -05:00
Scott Lahteine
5a064d0e94 Fix bug in planner.set_position_mm 2018-04-16 04:19:58 -05:00
Scott Lahteine
0945674ba2
Use H0 by default with UBL_MESH_EDIT_MOVES_Z (#10428) 2018-04-15 20:49:14 -05:00
Scott Lahteine
6cb83758d7 Fix Brazilian Portuguese language duplicates 2018-04-15 19:18:08 -05:00
Scott Lahteine
8f57e098de Use end-of-line comments in planner.cpp 2018-04-15 19:02:30 -05:00
Scott Lahteine
6c7a17dba6
Abort SD printing more safely (#10407) 
Allow the current command to complete when aborting an SD print, otherwise some commands (G28, G29, etc.) will cause trouble.
 2018-04-15 18:27:54 -05:00
Chris Pepper
c9aed73987 Fix missed includes from HAL macro patch (#10416) 2018-04-15 18:27:34 -05:00
Scott Lahteine
9f8a96fb8a
Brazilian Portuguese update (#10409) 2018-04-15 13:13:46 -05:00
Yunhui Fu
93273a4c9e Fix u8g.h search path error (#10419) 
Support env MARLIN_LANGS for user select generated language, and update doc; update script to generate dogm_font_data_ISO10646_1.h automatically.
 2018-04-15 13:12:02 -05:00
Scott Lahteine
584735c994 u8g.h => clib/u8g.h 2018-04-14 12:26:01 -05:00
Scott Lahteine
29dda871cb Patch "upload_disk" to make python happy 2018-04-13 22:27:08 -05:00
Scott Lahteine
36b97bde9f clear_block_buffer, kill_current_block in quick_stop 2018-04-13 22:04:53 -05:00
Scott Lahteine
99282a46e9 Make sure ABL (manual) starts close to the bed 2018-04-13 20:19:30 -05:00
Roxy-3D
21f13f9e57
Stow Probe at end of G29 J3 2018-04-13 14:46:47 -05:00
KangDroid
6c535081ec [2.0.x] Add optional menu item to toggle software endstops (#10389) 2018-04-13 00:24:09 -05:00
Scott Lahteine
3c5c6d478a Prettify process_parsed_command 2018-04-13 00:23:11 -05:00
Scott Lahteine
0535ebc4d2 MESH_BED_LEVELING before PROBE_MANUALLY 2018-04-12 22:45:52 -05:00
Scott Lahteine
bb7064cc30 Tweak MBL move to bed code 2018-04-12 22:43:02 -05:00
Chris Pepper
cc6d41e1d3 Use a macro for HAL header redirection (#10380) 2018-04-12 20:25:08 -05:00
Luc Van Daele
12785583d0 [2.0.x] G33 MIN_STEPS_PER_SEGMENT (#10386) 2018-04-12 20:22:29 -05:00
Yunhui Fu
c96412a78f [2.0.x] UTF-8 language translation support (#10213) 2018-04-12 20:14:01 -05:00
Scott Lahteine
daa712455b Make sure MBL starts close to the bed 
Fix #10390
 2018-04-12 19:36:37 -05:00
Scott Lahteine
4c8751727a Fix M118 parameter handling 
Fix #10388
 2018-04-12 19:10:04 -05:00
Scott Lahteine
3bc179a16f Compress/update comments ubl_motion 
…to fit more code on the screen and correct outdated commentary contrasting ABL.
 2018-04-12 18:07:19 -05:00
Luc Van Daele
646aa20b43 Overhaul of G33 Delta Calibration (#8822) 2018-04-11 21:14:48 -05:00
Luc Van Daele
ac2e0afb62 Low Point for delta calibration (#10363) 2018-04-11 18:59:46 -05:00
Eduardo José Tagle
57a899a412 [2.0.x] 6th-order jerk-controlled motion planning in real-time for AVR (#10373) 2018-04-11 18:13:42 -05:00
Bob-the-Kuhn
85014cd132 [2.0.x] LPC1768 - automatic selection of upload disk (#10374) 2018-04-11 14:41:16 -05:00
Scott Lahteine
8669dba5e6
Merge pull request #10172 from noingwhat/2.0.x-Filament-Change-Acceleration 
[2.0.x] Filament load/unload add acceleration for Bowden
 2018-04-11 00:39:11 -05:00
Scott Lahteine
472ab0cc24 Tweak RAMPS SDSS pins 2018-04-10 16:47:48 -05:00
LichtiMC
b94c8defee Provide additional information about SMART-RAMPS board (#10353) 2018-04-10 04:02:55 -05:00
Scott Lahteine
6f8e228880 Add RESET_PIN to pins_RAMPS_SMART.h 2018-04-10 03:34:20 -05:00
Sean
2d9b0a66fe Add Filament Change accelerations 2018-04-09 23:57:27 -05:00
Scott Lahteine
71d3523254 Add Filament Change accelerations to example configs 2018-04-09 23:57:23 -05:00
Scott Lahteine
8b8ad14178 Add Z_PROBE_LOW_POINT to prevent damage 2018-04-09 17:23:03 -05:00
Scott Lahteine
82dafbba33 Add Z_PROBE_LOW_POINT to example configs 2018-04-09 01:55:05 -05:00
Roxy-3D
a731a723e8 Better i3-2020 Z_PROBE_OFFSET_FROM_EXTRUDER 2018-04-08 21:26:36 -05:00
Roxy-3D
26cc12eaa4 Resolve corruption of Max7219 Debug LED Matrix 2018-04-08 21:26:36 -05:00
Scott Lahteine
dca69efc11 Update Bed PID comments 2018-04-08 06:44:47 -05:00
Scott Lahteine
56486c5c0e Apply const to manage_inactivity 2018-04-08 04:00:26 -05:00
Scott Lahteine
a6485456df Fix LIGHTWEIGHT_UI with UBL 
See https://github.com/MarlinFirmware/Marlin/issues/10317#issuecomment-379100702
 2018-04-08 03:24:22 -05:00
Scott Lahteine
e02fc4f1d6 Better RESTORE_LEVELING_AFTER_G28 sanity-check 
As suggested by @GMagician
 2018-04-08 03:24:15 -05:00
Scott Lahteine
44a697ab04 Set STM32F1 TEMP_TIMER_FREQUENCY to 1K 
Responding to https://github.com/MarlinFirmware/Marlin/pull/8833#issuecomment-379426803
 2018-04-08 01:08:05 -05:00
Scott Lahteine
cec6e19099 Add RepRapPro Huxley configuration 
Based on #10343 by @indazoo
 2018-04-08 00:37:18 -05:00
Scott Lahteine
9ff4e9e1e6 Patch _IS_HW_SPI so defined() works 2018-04-07 23:29:00 -05:00
Scott Lahteine
cea398849e Tweak to gcode_line_error/return 2018-04-07 21:25:49 -05:00
etagle
a29adde5c0 Implement BEZIER_JERK_CONTROL 
Enable 6th-order jerk-controlled motion planning in real-time.
Only for 32bit MCUs. (AVR simply does not have enough processing power for this!)
 2018-04-07 21:03:28 -05:00
Scott Lahteine
5932df7ea1 Add BEZIER_JERK_CONTROL to example configs 2018-04-07 21:03:22 -05:00
Lenbok
0e8242180d Chamber temperature monitoring and auto fan control. 
This is an initial cut for feedback, updated for 2.0.x.

Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?

Chamber temperatures are not reported on the LCD in any way.

When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.

As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
 2018-04-06 23:09:06 -05:00
Scott Lahteine
5b3bda1c16 Add Chamber Temp options to example configs 2018-04-06 23:09:06 -05:00
Bob-the-Kuhn
acda4ecb20 Fix DUE Trinamic SW/HW SPI sanity check (#10336) 2018-04-06 22:22:30 -05:00
Bob-the-Kuhn
ab715c70d1 TMC SPI sanity-check and pins debugging (#10324) 2018-04-06 20:24:54 -05:00
Scott Lahteine
4dc7e64789 Update Slovak language 
Based on #10313 by @rmoravcik
 2018-04-06 20:23:20 -05:00
Scott Lahteine
0dccf9ea6a
Merge pull request #10318 from marcio-ao/pr-einsy-retro-tmc2130 
[2.0.x] Fix TMC2130 DIAG1 active high, Einsy Retro
 2018-04-06 20:18:34 -05:00
Marcio Teixeira
2efc072fdb Clear progress bar on completion (#10333) 
Fix #10330
 2018-04-06 20:13:19 -05:00
GMagician
6ce060cfe0 [2.0.x] Update language_it.h (#10322) 
Updated to #10296
 2018-04-06 20:07:46 -05:00
Marcio Teixeira
9356cf648f Added support for Einsy Retro 
http://reprap.org/wiki/EinsyRetro
 2018-04-06 19:48:46 -05:00
Marcio Teixeira
75037493fa Default active low for TMC2130 DIAG1 (#10294) 
- Added sanity check to inform users to set the endstop to inverting
  when using SENSORLESS_HOMING
 2018-04-06 19:48:46 -05:00
Scott Lahteine
e8e60263c8 Scale feedrate (mm/s to deg/s) for SCARA 2018-04-06 19:47:48 -05:00
Scott Lahteine
051303ad42 Russian language updates 
From #10311 by @anton-piliugin
 2018-04-05 00:46:46 -05:00
Sean
2fa0a73c2c Implement filament change continuous purge 2018-04-04 20:57:51 -05:00
Scott Lahteine
d133ad61f3 Add continuous purge to example configs 2018-04-04 20:56:18 -05:00
Scott Lahteine
4b25543633 Backtrace formatting cleanup 2018-04-04 20:24:39 -05:00
Bob-the-Kuhn
902c885782 Switch to TMC2130 compatible hardware SPI & misc (#10299) 2018-04-04 20:13:27 -05:00
Scott Lahteine
1c36606886 Fix MSG_HEATING_FAILED_LCD_BED macro evaluation 2018-04-04 19:01:22 -05:00
Scott Lahteine
fe91514395
MBL should add z_offset regardless of fade (#10308) 2018-04-04 18:57:33 -05:00
Marcio Teixeira
8bc93c6f2b Improve heating/cooling LCD messages (#10293) 2018-04-04 18:29:27 -05:00
GMagician
21a47b50f4 Additional tool-change fixes (#10304) 
Followup to #10257
 2018-04-04 17:06:33 -05:00
Scott Lahteine
f68b4265a6 Fix a probe pin definition 2018-04-02 21:52:34 -05:00
Yunhui Fu
a019eebdd6 support utf8 unicode for test language (#10220) 2018-04-02 20:03:25 -05:00
Scott Lahteine
656219d867 Add configs for Creality CR-8 2018-04-02 20:02:04 -05:00
Karl Andersson
7cbbc2af7a [2.0.x] Optional heater signal inversion (#10260) 2018-04-02 19:37:41 -05:00
Marcio Teixeira
4d1a61335c [2.0.x] Fixed Makefile for Marlin 2.0 (#10255) (#10281) 
* Fixed Makefile for Marlin 2.0 (#10255)

- Makefile now supports the new Marlin 2.0 directory hierarchy.
- RELOC_WORKAROUND is now automatically enabled based on avr-gcc version.

* Makefile support for U8glib and TMC2130Stepper

- Updated paths for oliver's U8glib 1.19.1
- Added option for teemuatlut's TMC2130Stepper 2.2.1
 2018-04-02 19:36:27 -05:00
Scott Lahteine
241996d5d6
Merge pull request #10257 from thinkyhead/bf2_tool_change_debug 2018-04-02 19:33:45 -05:00
Scott Lahteine
4c79dc1093 Fix a Serial+EEPROM compile error 
Fixes #10278
 2018-04-02 03:11:20 -05:00
Scott Lahteine
93305a2d5e Fix some spellings 2018-04-02 03:03:37 -05:00
Scott Lahteine
adcb87f0db Z Endstop Servo => Z Probe Servo 2018-04-01 23:54:21 -05:00
Scott Lahteine
4f0eafce8f Add more AVR boards to Makefile 2018-04-01 18:22:06 -05:00
Scott Lahteine
4a23069de9 Fix Ender 4 / CR-8 compilation 
- Assign 243 (like EFB) as Ender-4/CR-8 board ID
- Add to `Makefile`
- Add to `pins.h`
 2018-04-01 18:22:06 -05:00
Scott Lahteine
02f0f95d40
Handle disabled HYBRID_THRESHOLD in EEPROM (#10275) 2018-04-01 16:58:37 -05:00
Scott Lahteine
9ec2c03c5b Fix likely error in retract/recover 
Addressing #10200
 2018-03-31 23:01:13 -05:00
Scott Lahteine
49f384a2ab Note about MKS_MINI_12864 in sanitycheck 2018-03-31 22:52:23 -05:00
Scott Lahteine
2672120a97 Do a small raise for all move-back 2018-03-31 22:43:05 -05:00
Scott Lahteine
5acccbacc1 Simplified leveling-based tool change 2018-03-31 22:43:05 -05:00
Scott Lahteine
1a75165f35 For set_z_fade_height use set_bed_leveling_enabled 2018-03-31 22:43:05 -05:00
Scott Lahteine
d1734a089a Split up tool_change for some setups 2018-03-31 22:43:05 -05:00
Scott Lahteine
a9f94f260a Some RADDS pin updates 2018-03-31 22:15:24 -05:00
Scott Lahteine
31df43212c Use lcd_printPGM_utf in more places 
Fix #10256
 2018-03-31 20:49:20 -05:00
Scott Lahteine
7d8a46519f Output ABC for delta stepper counts 2018-03-31 20:13:32 -05:00
Scott Lahteine
6098efcc59 Use float62 for LCD edit of Z Fade 2018-03-31 20:03:09 -05:00
Scott Lahteine
f6d13e2295 Allow Z_SAFE_HOMING sanity checks to handle floats 2018-03-31 19:01:56 -05:00
Scott Lahteine
889fd5f71f Backtrace minor cleanup 2018-03-31 18:59:36 -05:00
Scott Lahteine
53f0c7522a Symmetrical FWRETRACT Z Hop 
Do the Z lift normally before setting Z back to its prior value. But do the Z lower using spoofing. This should produce proper symmetrical movement.
 2018-03-30 15:54:01 -05:00
Scott Lahteine
ac7e97f4fe Change order of inactive stepper disable/enable 
This ensures that steppers that share an enable pin will only be disabled for a miniscule time.
 2018-03-30 15:07:38 -05:00
Scott Lahteine
55e9b85ad6 Clear the "Wait for user" message set by M0/M1 
See https://github.com/MarlinFirmware/Marlin/issues/10246#issuecomment-377146936
 2018-03-29 18:38:12 -05:00
Scott Lahteine
b6a55f0891 Temporary workaround for tool-change compile error 
Pending a more complete solution to tool-change Z deviation.
 2018-03-29 17:55:57 -05:00
Scott Lahteine
b852781eba Fix BLTOUCH compile error 
Followup to #10250
 2018-03-29 17:55:57 -05:00
AnHardt
c1f58a238d No delay in sensorless quick homing (#10254) 2018-03-29 16:10:20 -05:00
Scott Lahteine
1be955e52a Alert users about low Z jerk values 2018-03-28 23:08:33 -05:00
Scott Lahteine
9e4c037cef
Wait before turning off PRINTER_EVENT_LEDS at print end (#10248) 2018-03-28 22:59:28 -05:00
Scott Lahteine
8b7381b626 Clear sensorless homing in home_delta after first move-to-top 2018-03-28 22:01:42 -05:00
Scott Lahteine
dbe2b6f7b0 Do moves towards endstops differently in do_homing_move 2018-03-28 22:01:42 -05:00
Scott Lahteine
d573a2cada Fix pins_RAMPS.h for 32-bit platforms 
Followup to 436e5b7
 2018-03-28 22:01:20 -05:00
Scott Lahteine
f04be05a14 "G28 Z Forbidden" => "Home XY first" 
Some languages will need to be updated for proper phrasing
 2018-03-28 21:51:15 -05:00
Scott Lahteine
a97624dd81 Allow pinsDebug "Analog in" long int 2018-03-28 20:40:28 -05:00
Scott Lahteine
7b8bb2519e Fix gcode_line_error call 
Followup to 3007eee
 2018-03-28 20:29:41 -05:00
Scott Lahteine
aa20b3ef7c Fix linear/3-point manual leveling buffer overrun 
Fixes #10137
 2018-03-28 18:41:22 -05:00
Alexey Shvetsov
cbdc78ec0f Fix STM32 compilation with PlatformIO (#10245) 2018-03-28 18:35:20 -04:00
Scott Lahteine
9d2ea5d64b Undo German changes 
See 941e9bd329 (commitcomment-28262166)
 2018-03-28 17:05:14 -05:00
Scott Lahteine
2bc7f416ee Fix missing comma in tmc_sgt 
Fixes #10209
 2018-03-28 17:05:14 -05:00
Scott Lahteine
38378cd0e8 M218 with DELTA needs planner.h 
Fix #10232
 2018-03-28 17:05:14 -05:00
Scott Lahteine
3007eee22e Require a checksum when writing to SD 
From #10204 by @adriancuzman
 2018-03-28 17:05:13 -05:00
Bob-the-Kuhn
9656a82609 Fix G53/CNC_COORDINATE_SYSTEMS compilation, Travis testing (#10227) 2018-03-28 14:14:39 -04:00
Eduardo José Tagle
749f19e502 [2.0.x] Move backtrace to a shared location (#10237) 
- And implement the `backtrace()` function call
 2018-03-28 14:13:20 -04:00
xC0000005
7dc256432f Restore STM32F1 series to working order. (#10229) 
The `_O2` attribute is no longer needed on the malyanlcd function, and the macros have broken timer numbers - reset this to a function to return the right device. Also fix the bit order cast in SPI.
 2018-03-28 14:07:52 -04:00
Rob Power
d1f14202a9 [2.0.x] NANODLP_Z_SYNC requires linear axes (#10240) 2018-03-28 14:03:34 -04:00