bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
6,052 Commits 1 Branch 4 Tags 151 MiB
8c7ee4599e
Commit Graph

4943 Commits

Author SHA1 Message Date
Scott Lahteine
b183442c61 Fix inactive_extruder_x_pos for coordinate space 2016-07-24 17:20:36 -07:00
Scott Lahteine
f75b0c2ee1 Make POSITION macros global 2016-07-24 17:20:36 -07:00
Scott Lahteine
101b60ef42 Tweak Dual X Carriage data spacing 2016-07-24 17:20:35 -07:00
Scott Lahteine
1fe60b723f Merge pull request #4400 from thinkyhead/rc_sanity_check_temp_sensor 
Sanity check for too many temp sensors
 2016-07-24 15:38:41 -07:00
Scott Lahteine
bedda3be61 Patch generic delta error caught by sanity check 2016-07-24 15:24:40 -07:00
Scott Lahteine
a5212bf277 Sanity check for too many temp sensors 2016-07-24 13:47:27 -07:00
Scott Lahteine
d8f2876753 Replace some float division with multiplication 2016-07-24 13:27:50 -07:00
Scott Lahteine
ddde785b37 Code formatting in planner.cpp 2016-07-24 13:27:50 -07:00
Scott Lahteine
f8b5749235 Replace division in planner with multiplication 2016-07-24 13:27:49 -07:00
Scott Lahteine
b921f6b69d Optimize calculation of block->millimeters for DELTA 2016-07-24 13:27:49 -07:00
Scott Lahteine
db5df9500b Move sync_plan_position closer to the top 2016-07-24 13:27:49 -07:00
Scott Lahteine
2839c56f5a Merge pull request #4390 from jbrazio/duration_t 
Renamed timestamp_t to duration_t
 2016-07-24 13:24:05 -07:00
Scott Lahteine
d6c50671d3 Sanitycheck: Z_SAFE_HOMING points are reachable 2016-07-24 10:54:47 -07:00
Scott Lahteine
a6203366b6 Sanitycheck: Z_SAFE_HOMING requires a probe 2016-07-24 10:54:25 -07:00
Scott Lahteine
bbe5b80492 Always define probe limits if there is a probe 2016-07-24 10:53:58 -07:00
Silvio Didonna
950397f2a0 Added missing translations. Removed trailing spaces for consistency (#4376) 2016-07-24 17:22:30 +02:00
João Brázio
50fb0f7cec M31 serial output is now always in EN 2016-07-24 15:52:03 +01:00
João Brázio
62d96d72f3 Renamed timestamp_t to duration_t 2016-07-24 03:16:02 +01:00
Scott Lahteine
3e2b3353b0 Fix axis indices for COREYZ 2016-07-23 19:02:14 -07:00
Scott Lahteine
c287846f46 Merge pull request #4387 from thinkyhead/rc_anhardt_more_4370 
Update Z in a unified way in run_z_probe
 2016-07-23 16:47:10 -07:00
Scott Lahteine
22d0654fe6 Merge pull request #4382 from esenapaj/Update-Japanese-translation 
Update Japanese translation
 2016-07-23 16:31:38 -07:00
Scott Lahteine
bb93b6822a Use set_current_from_steppers_for_axis 2016-07-23 15:25:54 -07:00
AnHardt
96a162beda Use implications from #4370 in run_z_probe() 
See also https://github.com/MarlinFirmware/Marlin/pull/4370#issuecomment-234713680
 2016-07-23 13:09:28 -07:00
Scott Lahteine
4e67a85a5d Macros to loop over axes 2016-07-23 13:09:28 -07:00
esenapaj
784be56e99 Follow-up the PR #4353 (General cleanup: enum) 
・Update description of M111
 2016-07-24 00:53:35 +09:00
esenapaj
3c11977558 Update Japanese translation 
・Add translation
・Change translation
・Remove translation
 2016-07-23 22:07:20 +09:00
Scott Lahteine
08459a003f Undo the self-sabotage that is do_blocking_move_to_axis_pos 2016-07-23 00:59:11 -07:00
esenapaj
d32c4056ad Fix for the PR #4379 (Additional logging of do_blocking_move_to) 
・Remove unneeded PSTR()
 2016-07-23 16:38:57 +09:00
Scott Lahteine
8099ee51a5 Merge pull request #4379 from thinkyhead/rc_blocking_move_logging 
Additional logging of do_blocking_move_to
 2016-07-23 00:10:55 -07:00
Scott Lahteine
8633b644cf Merge pull request #4378 from thinkyhead/rc_debug_leveling_docs 
Document DEBUG_LEVELING_FEATURE
 2016-07-22 23:57:01 -07:00
Scott Lahteine
ad16d5019e Additional logging of do_blocking_move_to 2016-07-22 23:53:08 -07:00
Scott Lahteine
bb9da6ebdd Document DEBUG_LEVELING_FEATURE 2016-07-22 23:37:41 -07:00
Scott Lahteine
652fd8a826 Merge pull request #4362 from thinkyhead/rc_duplication_mode 
DUAL_NOZZLE_DUPLICATION_MODE
 2016-07-22 21:17:59 -07:00
Scott Lahteine
1766b990b8 Merge pull request #4376 from jbrazio/timestamp_t-short 
Adds short format to timestamp_t
 2016-07-22 21:17:17 -07:00
Scott Lahteine
6da3729531 Merge pull request #4370 from thinkyhead/rc_delta_fwd_kinematics 
Delta Forward Kinematics (and LOGICAL_POSITION)
 2016-07-22 21:16:00 -07:00
João Brázio
9e5dbf67e8 Update the stats menu to include longest job and extruded filament 2016-07-23 03:05:45 +01:00
João Brázio
86d9311495 Rework LCD implementation to use timestamp_t 2016-07-23 03:05:36 +01:00
Scott Lahteine
b3eb0c8569 Add LOGICAL_POSITION macro, apply to kinematics 2016-07-22 18:38:13 -07:00
Scott Lahteine
35a610abf9 const arg to inverse_kinematics 2016-07-22 17:42:48 -07:00
João Brázio
b4aad85c9a Rework stats menu to use timestamp_t 2016-07-23 01:42:21 +01:00
João Brázio
ecd48027fa Adds short timestamp format to timestamp_t 2016-07-23 01:41:25 +01:00
Scott Lahteine
b6afa028f4 Don't call adjust_delta on SCARA 2016-07-22 16:36:34 -07:00
Scott Lahteine
d5e2d523c7 Generalize kinematics function names 2016-07-22 16:36:34 -07:00
Scott Lahteine
9c4ad7d7ef Clean up delta declarations in Marlin_main.cpp 2016-07-22 16:36:33 -07:00
Scott Lahteine
4b1725628b Move kinematic functions to "private" scope 2016-07-22 16:36:33 -07:00
Scott Lahteine
cde068ea42 Use set_current_from_steppers in quickstop_stepper 2016-07-22 16:36:33 -07:00
Scott Lahteine
9f30cc84ce Use set_current_from_steppers for other kinematics 2016-07-22 16:36:33 -07:00
AnHardt
5db9b940ee Use forwardKinematics in DELTA run_z_probe() 2016-07-22 16:36:33 -07:00
Scott Lahteine
b5a9647fec Use ENABLED in stepper_indirection.h 2016-07-22 16:26:06 -07:00
Scott Lahteine
cbc7f22ad9 Implement DUAL_NOZZLE_DUPLICATION_MODE 2016-07-22 16:23:58 -07:00
Scott Lahteine
91777dd76c Add DUAL_NOZZLE_DUPLICATION_MODE option 2016-07-22 16:22:56 -07:00
Scott Lahteine
260bbb3109 Fix a couple of simple typos 2016-07-22 16:22:56 -07:00
Scott Lahteine
179e091473 Merge pull request #4374 from thinkyhead/rc_jbrazio_timestamp_t 
Implements timestamp_t structure
 2016-07-22 16:08:10 -07:00
AnHardt
499e404fbf forwardKinematics for Delta printers 2016-07-22 16:01:51 -07:00
João Brázio
23043a1e05 Rework some code to use timestamp_t struct (saves 72 bytes) 2016-07-22 15:53:31 -07:00
João Brázio
9388dcfa49 Implements timestamp_t structure 2016-07-22 15:53:31 -07:00
Scott Lahteine
0b2c608d2f Merge pull request #4372 from jbrazio/gcc-bark 
Fix minor gcc warning
 2016-07-22 15:18:53 -07:00
Scott Lahteine
311c7dadb6 Cleanup do_blocking_move_to for DELTA 2016-07-22 14:18:45 -07:00
Scott Lahteine
b78590e63d Patch and cleanup run_z_probe 2016-07-22 14:18:45 -07:00
João Brázio
2f7716987d Fix minor gcc warning 2016-07-22 16:08:56 +01:00
João Brázio
efd3aabda8 Adds missing documentation to the point_t structure 2016-07-22 15:19:20 +01:00
Scott Lahteine
39caef4279 Merge pull request #4361 from AnHardt/imp-dbmt-for-delta 
DELTA do_blocking_move_to() more like the Chartesian one
 2016-07-21 20:05:04 -07:00
Scott Lahteine
7d869ad98b Merge pull request #4365 from thinkyhead/rc_shrink_planner_accel 
Adjustments to planner acceleration limit
 2016-07-21 18:18:15 -07:00
AnHardt
376a57232e DELTA do_blocking_move_to() more like the Chartesian one 2016-07-22 03:12:46 +02:00
Scott Lahteine
824c6859e2 Merge pull request #4369 from thinkyhead/rc_no_static_moves 
inline to fix warnings, smaller build size (sometimes)
 2016-07-21 14:46:09 -07:00
Scott Lahteine
976c31235d inline to fix warnings, smaller build size (sometimes) 2016-07-21 13:49:37 -07:00
AnHardt
6ef26a85d8 Back to the differences method in run_z_probe() 2016-07-21 18:16:38 +02:00
Scott Lahteine
4226f56f53 Revert the planner acceleration logic somewhat 2016-07-20 19:19:47 -07:00
Scott Lahteine
16e5348659 Merge pull request #4360 from thinkyhead/rc_toolchange_for_G28 
Always switch to tool 0 for G28
 2016-07-20 19:07:35 -07:00
Scott Lahteine
209f5c03d0 Fewer temporary vars in planner accel limit 2016-07-20 18:29:29 -07:00
Scott Lahteine
62ecd107ba Patch ultralcd_impl header conditional names 2016-07-20 09:36:55 -07:00
Scott Lahteine
d2e9a9c188 Always switch to tool 0 for G28 2016-07-20 09:36:55 -07:00
Scott Lahteine
194d9521c3 Merge pull request #4356 from thinkyhead/rc_simpler_run_z_probe 
Unify run_z_probe
 2016-07-19 19:02:39 -07:00
Scott Lahteine
4a6ed5e221 Use HOMING_FEEDRATE_Z for Z_PROBE_SPEED_FAST 2016-07-19 18:42:48 -07:00
AnHardt
09a3cc33e6 Unify run_z_probe 
Unify run_z_probe
Add double touch for DELTAs.
Introduce Z_PROBE_SPEED_FAST and Z_PROBE_SPEED_SLOW
  defaulting to homing_feedrate_mm_m[Z_AXIS] and homing_feedrate_mm_m[Z_AXIS]/2
 2016-07-19 18:42:48 -07:00
Scott Lahteine
6137a1d934 Merge pull request #4359 from thinkyhead/rc_wrangle_movement_etc 
Use ENABLED(MAPPER_NON)
 2016-07-19 18:22:55 -07:00
Scott Lahteine
0432613ad7 use enabled macro for mapper setting 2016-07-19 18:08:56 -07:00
Scott Lahteine
e44b37cdc2 motion section marker below homing speeds 2016-07-19 17:31:58 -07:00
Scott Lahteine
204fd6ec44 Set homing feedrates individually 2016-07-19 17:31:58 -07:00
Scott Lahteine
2bad02e60d Reprapworld Keypad: F1 opens the Move Axis menu 2016-07-19 16:40:39 -07:00
Scott Lahteine
eaa6f568ee Prevent re-entrant call of Reprapworld Keypad handler 2016-07-19 16:40:39 -07:00
Scott Lahteine
6abf916575 Reprapworld Keypad move step is 1mm 2016-07-19 16:40:39 -07:00
Scott Lahteine
06ac1f3bcf Reduce Reprapworld Keypad move code size 2016-07-19 16:40:39 -07:00
Scott Lahteine
5d5affdfca Merge pull request #4355 from thinkyhead/rc_rename_ultralcd_files 
Rename ultralcd implementation files for consistency
 2016-07-19 16:14:27 -07:00
Scott Lahteine
bb225dedc6 Merge pull request #4354 from thinkyhead/rc_jbrazio_rework_g12 
NOZZLE_CLEAN_FEATURE with no dependency on HAS_BED_PROBE
 2016-07-19 15:26:59 -07:00
Scott Lahteine
8a2efd1155 Rename ultralcd implementation files for consistency 2016-07-19 15:26:14 -07:00
João Brázio
b869fbc05e Update all config files with the new G12 options 2016-07-19 15:07:03 -07:00
João Brázio
47fef80848 Nozzle::clean() no longer requires HAS_BED_PROBE 2016-07-19 15:07:02 -07:00
Scott Lahteine
f1f1bac0e1 Merge pull request #4341 from esenapaj/Update-Japanese-translation 
Update Japanese translation
 2016-07-19 15:04:22 -07:00
Scott Lahteine
6c899bb520 Merge pull request #4349 from jbrazio/gcc-bark-bark 
Removes some minor GCC warnings
 2016-07-19 13:42:33 -07:00
Scott Lahteine
ef0a22871e Merge pull request #4350 from jbrazio/followup-a875861 
Adds utility.h
 2016-07-19 13:40:52 -07:00
Scott Lahteine
9eba58a031 Merge pull request #4351 from jbrazio/u8glib-converter 
Updates u8glib's bmp2hex converter
 2016-07-19 13:39:33 -07:00
Scott Lahteine
c502018eab Merge pull request #4353 from jbrazio/global-enum-file 
General cleanup: enum
 2016-07-19 13:37:56 -07:00
Scott Lahteine
0f9953b031 Merge pull request #4342 from AnHardt/rep-cons-g28 
Introduce line_to_axis_pos() for use in homeaxis()
 2016-07-19 12:56:58 -07:00
AnHardt
11c075c6b2 Introduce line_to_axis_pos(axis_codes axis, float where, float feed_rate = 0.0) 
and use it in `homeaxis()` instead of `do_blocking_move_to_axis_pos()`.
`do_blocking_move_to_axis_pos` was wrong because it performed subdivided, delta-corrected moves for x- and y-axis.

The first common move for delta homing is like quick_home but for 3 towers.

Fix two warnings.
 2016-07-19 17:24:44 +02:00
João Brázio
3ebad4e020 Moves all global enums to a central file 2016-07-19 14:31:09 +01:00
João Brázio
238fefcb00 Updates Stopwatch class to use internal state enum 2016-07-19 14:30:44 +01:00
João Brázio
30ac0782a9 Comment section style correction 2016-07-19 03:27:42 +01:00
João Brázio
8ecee431c4 Updates u8glib's bmp2hex converter 2016-07-19 03:16:30 +01:00
João Brázio
79e7721b76 Removes some minor GCC warnings 2016-07-19 03:03:11 +01:00
João Brázio
f4d63796b2 Adds utility.h 2016-07-19 02:55:23 +01:00
esenapaj
361307831e Follow-up the PR #4335 (Debug char, fix compile errors for lcd pins) 
・Solve a flickering when SD card is inserted or removed at using a ASCII
LCD + language_kana.h
 2016-07-18 20:09:24 +09:00
esenapaj
ff48bbb86a Update Japanese translation 
・Add new translation
 2016-07-18 17:01:56 +09:00
Scott Lahteine
46117593b9 Merge pull request #4185 from esenapaj/Update-Japanese-translation 
Update Japanese translation (work in progress)
 2016-07-17 18:36:34 -07:00
Scott Lahteine
3422103863 Merge pull request #4310 from thinkyhead/rc_mbl_position_shift 
Fix position shift with MBL
 2016-07-17 18:31:25 -07:00
Scott Lahteine
92757bd7b3 Merge pull request #4339 from esenapaj/Follow-up-the-PR-#4163 
Follow-up the PR #4163 (Mixing and Switching Extruders)
 2016-07-17 18:15:23 -07:00
Scott Lahteine
493d30cd97 Drop intermediate nx, ny, and set destination directly 2016-07-17 17:59:52 -07:00
Scott Lahteine
07a735ad22 We always use destination so modify mesh_buffer_line 2016-07-17 17:57:33 -07:00
Scott Lahteine
04a5b7b257 A macro to normalize positions 2016-07-17 17:57:32 -07:00
esenapaj
5c8e87a866 Follow-up the PR #4163 (Mixing and Switching Extruders) 
・Update forgotten K8400 files
 2016-07-18 09:48:13 +09:00
Scott Lahteine
86eb5251c5 Fix some debug messages 2016-07-17 17:10:02 -07:00
Scott Lahteine
1e57a6af73 Use blocking_move, current_position in G28 homing 2016-07-17 16:56:13 -07:00
Scott Lahteine
f6a3a1da09 nz and ne are always set, so drop them down 2016-07-17 14:12:39 -07:00
Scott Lahteine
d0009e013b Rename cell index vars 2016-07-17 14:12:39 -07:00
Scott Lahteine
697373b071 Reduce code size of mesh_buffer_line 2016-07-17 14:11:25 -07:00
Scott Lahteine
103d312f6d MBL can actually do up to 9 x 9 2016-07-17 14:11:25 -07:00
Scott Lahteine
f4a69281fc Only call mesh_buffer_line when MBL is active 2016-07-17 14:11:25 -07:00
Scott Lahteine
799a31cd30 Include the position_shift when splitting mesh lines 2016-07-17 14:08:20 -07:00
Scott Lahteine
f242aea032 Merge pull request #4319 from thinkyhead/rc_feedrates_to_mess_with_you 
Wrangle feed rate variables
 2016-07-17 14:07:52 -07:00
Scott Lahteine
0342661b3f Merge pull request #4335 from thinkyhead/rc_status_pad_jp 
Debug char, fix compile errors for lcd pins
 2016-07-17 14:07:08 -07:00
Scott Lahteine
81e01152bb Merge pull request #4336 from thinkyhead/rc_bltouch_sensor 
BLTouch probe sensor
 2016-07-17 14:06:32 -07:00
Scott Lahteine
1583177ef4 BLTOUCH probe config option 2016-07-17 13:55:38 -07:00
Scott Lahteine
176b9627c7 Some cleanup ahead of BLTOUCH support 2016-07-17 13:55:38 -07:00
Scott Lahteine
39706f3e57 Endstop invert flags as macros instead of const bool 2016-07-17 13:51:02 -07:00
Scott Lahteine
7242d44810 Endstops vars already initialized 2016-07-17 13:38:48 -07:00
Scott Lahteine
5ed1e7a464 codenum => dwell_ms 2016-07-17 13:35:21 -07:00
Scott Lahteine
69d6016941 Revert default state of endstops in M502 2016-07-17 13:35:21 -07:00
Scott Lahteine
0fcd3706dd Replace ENDSTOPS_ONLY_FOR_HOMING with ENDSTOPS_ALWAYS_ON_DEFAULT 2016-07-17 13:35:21 -07:00
Scott Lahteine
671634bf11 Fix spacing after section header 2016-07-17 13:35:21 -07:00
Scott Lahteine
f38553b482 fix a debug message 2016-07-17 13:29:42 -07:00
Scott Lahteine
3d78b8f929 Use HYPOT macro instead of hypot function 2016-07-17 13:29:42 -07:00
Scott Lahteine
9f9fe043ba Apply sq macro throughout 2016-07-17 13:29:41 -07:00
Scott Lahteine
93ba5bddd7 Append units to feedrate variables 2016-07-17 13:29:41 -07:00
Scott Lahteine
5e3d3918b6 Patch compile error for RAMPS LCD pins 2016-07-17 12:27:37 -07:00
Scott Lahteine
94955a8bf7 pad string in lcd_finishstatus 2016-07-17 12:27:37 -07:00
Scott Lahteine
21ee0612e3 Debug char 2016-07-17 12:27:36 -07:00
Scott Lahteine
8f24e0a556 Debugging of MBL in G28 2016-07-17 11:08:30 -07:00
Scott Lahteine
05da02f0a2 Implement MIXING_EXTRUDER and SWITCHING_EXTRUDER 2016-07-17 10:53:10 -07:00
Scott Lahteine
22b4cff423 New extruder type configuration options 2016-07-17 00:13:56 -07:00
esenapaj
601015b73e Update Japanese translation 2016-07-17 16:04:12 +09:00
Scott Lahteine
9766e24504 Merge pull request #4277 from thinkyhead/rc_mks_13_viki2 
Support for VIKI2 with MKS 1.3 / 1.4
 2016-07-16 23:49:33 -07:00
Scott Lahteine
02285662f5 Merge pull request #4298 from jbrazio/feature/filament-counter 
Adds filamentUsed and longestPrint stats to PrintCounter
 2016-07-16 23:48:46 -07:00
Scott Lahteine
bf16ae5a70 Merge pull request #4299 from jbrazio/feature/g27-park-nozzle 
Implements park nozzle feature
 2016-07-16 23:47:12 -07:00
Scott Lahteine
aaa0d298b9 Merge pull request #4326 from thinkyhead/rc_no_static_items_fix 
Suppress compiler warnings in ultralcd.cpp
 2016-07-16 23:38:08 -07:00
Scott Lahteine
cc3ef73583 Merge pull request #4327 from thinkyhead/rc_petrzjr_long_print 
LCD Longer print
 2016-07-16 23:37:34 -07:00
Scott Lahteine
77c8fb627f Merge pull request #4329 from thinkyhead/rc_italian_fix 
Added missing Italian translations
 2016-07-16 23:37:15 -07:00
Scott Lahteine
b14888501b Merge pull request #4301 from Ingramz/RCBugFix 
Add Cartesio CN Controls V11
 2016-07-16 22:35:07 -07:00
Silvio Didonna
32e0d71729 Added missing translations 2016-07-16 22:26:46 -07:00
Scott Lahteine
0f3232065e Merge pull request #4305 from jbrazio/feature/splash-improvement 
Custom boot screen feature improvement
 2016-07-16 21:59:39 -07:00
Petr Zahradník junior
2d7fe9dc78 LCD Longer print 2016-07-16 18:21:06 -07:00
Scott Lahteine
eee903bd4b Format some DAC lines 2016-07-16 17:59:13 -07:00
Scott Lahteine
d53dcaa796 Suppress some compiler warnings 2016-07-16 17:59:01 -07:00
João Brázio
fa4274cf4c Improves the custom bootscreen logo feature 2016-07-17 01:31:44 +01:00
João Brázio
1f3283e3a5 Adds custom boot logos for bq Hephestos 2 and Cartesio 2016-07-17 01:31:36 +01:00
João Brázio
dfa1c45075 Adds a notice to vendors about the SHOW_CUSTOM_BOOTSCREEN directive 2016-07-17 01:15:17 +01:00
Scott Lahteine
ed468e848f Merge pull request #4321 from esenapaj/Follow-up-the-PR-#4287 
Follow-up and fix the PR #4287 (Allow stopwatch and printcounter to go over 18:12:15)
 2016-07-16 17:14:21 -07:00
João Brázio
a8758619ec The safe_delay() is now globaly accessible 2016-07-16 12:28:06 +01:00
João Brázio
9a00108cb6 Adds the WEBSITE_URL as the boot screen line 2 2016-07-16 12:24:37 +01:00
João Brázio
f5234b0695 Adds a customizable screen timeout for the default boot screen 2016-07-16 12:24:36 +01:00
João Brázio
2f26bc2153 Adds filamentUsed and longestPrint stats to PrintCounter 2016-07-16 12:12:27 +01:00
João Brázio
336481ea81 Added G27 configuration options to all configs 2016-07-16 12:07:59 +01:00
João Brázio
c711701626 Implements a nozzle parking command (G27) 2016-07-16 12:07:59 +01:00
João Brázio
5f368d1bc3 Followup for #4320 2016-07-16 11:57:35 +01:00
João Brázio
d7c51bc4b9 Merge pull request #4320 from jbrazio/followup/4307 
Moves do_blocking_move_to_xy() out of the HAS_BED_PROBE define
 2016-07-16 11:48:00 +01:00
esenapaj
af9b1d79b1 Follow-up and fix the PR #4287 (Allow stopwatch and printcounter to go over 18:12:15) 
・Remove MSG_END_HOUR and MSG_END_MINUTE from all the language files
・Change from MSG_INFO_TOTAL_PRINTS to MSG_INFO_PRINT_COUNT in German
file
 2016-07-16 18:39:22 +09:00
Scott Lahteine
e563634a25 Merge pull request #4314 from AnHardt/use-d_b_m_t-in-g28 
Use do_blicking_move_to*() in G28
 2016-07-15 20:22:02 -07:00
Scott Lahteine
59ae1811c2 Merge pull request #4303 from AnHardt/delta-g28 
DELTA: Move out of the clip-zone after G28
 2016-07-15 20:20:22 -07:00
João Brázio
fdea8b6e6a Moves do_blocking_move_to_xy() out of the HAS_BED_PROBE define 2016-07-16 03:59:49 +01:00
AnHardt
d2a49c016d DELTA: Move out of the clip-zone after G28 
Move down to a safe height after G28 for DELTAs.
 2016-07-15 15:22:44 +02:00
AnHardt
46994fd17d Use do_blicking_move_to*() in G28 2016-07-15 15:02:15 +02:00
João Brázio
ffbb31b235 Fixes an PSTR overflow with print_xyz() 2016-07-15 11:25:34 +01:00
Indrek Ardel
ecb23c1b65 Add Cartesio CN Controls V11 board 2016-07-15 12:55:47 +03:00
Indrek Ardel
c8f2dd7cd5 Fix CN Controls 12 styling 2016-07-15 09:54:09 +03:00
Scott Lahteine
cec7110409 Merge pull request #4308 from thinkyhead/rc_debug_gcode_t 
Added logging related to gcode_T
 2016-07-14 19:46:33 -07:00
Scott Lahteine
6446d3939a Merge pull request #4309 from thinkyhead/rc_static_item_fix_77 
Fix skipping of static items
 2016-07-14 19:28:49 -07:00
Scott Lahteine
95ab2fd3ae Fix skipping of static items 2016-07-14 19:16:16 -07:00
Scott Lahteine
166f19251e Add more debugging for leveling 
- Especially in `gcode_T`
- In `update_software_endstops`
- Some tweaks to observe
 2016-07-14 19:04:13 -07:00
Scott Lahteine
7ac0b91a45 Collapsible long comment in gcode_T 2016-07-14 18:28:41 -07:00
João Brázio
e71a631f8f do_blocking_move_*() no longer depend on HAS_BED_PROBE 2016-07-15 01:54:14 +01:00
Scott Lahteine
8bf6861af8 Merge pull request #4054 from jbrazio/feature/g12-clean-tool 
Implements clean nozzle feature (Lulzbot's REWIPE)
 2016-07-14 14:38:38 -07:00
Scott Lahteine
c5e51f6b96 finished => completed 2016-07-14 11:46:35 -07:00
Scott Lahteine
1618870c84 card.printingHasFinished does print_job_timer.stop 2016-07-14 11:39:58 -07:00
Scott Lahteine
34da77dad3 Simply run M31 at the end of an SD print 2016-07-14 11:39:58 -07:00
Scott Lahteine
23d2bc5ab0 Patch Greek for new strings 2016-07-14 11:39:58 -07:00
Scott Lahteine
a8d71f0ac6 Support longer print times in M31 2016-07-14 11:39:58 -07:00
Scott Lahteine
e481b79af1 Allow stopwatch and printcounter to go over 18 hours 2016-07-14 11:39:57 -07:00
João Brázio
68c343a09a Added G12 configuration options to all configs 2016-07-14 00:38:42 +01:00
João Brázio
4937f9ada4 Minor G12 tweaks and point_t struct extension 2016-07-14 00:07:36 +01:00
Scott Lahteine
6080924589 Merge pull request #4296 from jbrazio/feature/bqh2-update 
Update the bq Hephestos 2 configuration
 2016-07-13 13:18:09 -07:00
Scott Lahteine
ed89c71e53 Merge pull request #4291 from esenapaj/Follow-up-the-PR-#4278 
Follow-up the PR #4278 (Fixups for PID_ADD_EXTRUSION_RATE and HOTENDS==1)
 2016-07-13 13:17:03 -07:00
João Brázio
021544f572 Improves G12 zig-zag pattern 2016-07-13 21:14:56 +01:00
João Brázio
b05a75655a Implements a nozzle cleaning pattern generator (G12) 2016-07-13 21:14:19 +01:00
João Brázio
005af84140
Update the bq Hephestos 2 configuration 2016-07-13 21:06:31 +01:00
esenapaj
8f03f0be9b Follow-up the PR #4252 (Replace PLA/ABS preheating with generic) 2016-07-13 22:42:16 +09:00
esenapaj
c2c8ab4698 Follow-up the PR #4278 (Fixups for PID_ADD_EXTRUSION_RATE and HOTENDS==1) 2016-07-13 22:24:31 +09:00
Scott Lahteine
4f77adddbe Merge pull request #4286 from thinkyhead/rc_debug_clean 
Prefix and suffix in debug output
 2016-07-12 20:49:15 -07:00
Scott Lahteine
e5c7af5ddc Merge pull request #4222 from thinkyhead/rc_allow_cold_extrude 
M302: Add "P" parameter, status output
 2016-07-12 20:40:14 -07:00
Scott Lahteine
2224032568 Merge pull request #4285 from thinkyhead/rc_manual_move_fast_fine 
No delay for the smallest LCD moves
 2016-07-12 20:16:38 -07:00
Scott Lahteine
cdd77d23bb Neaten up temperature member data 2016-07-12 20:04:15 -07:00
Scott Lahteine
d4c68279c8 Add "P" parameter to M302 2016-07-12 20:04:15 -07:00
Scott Lahteine
a5bae3c7d5 Merge pull request #4229 from blubbfish/patch-1 
Update language_de.h for German translation
 2016-07-12 20:01:46 -07:00
Scott Lahteine
a8b6b6a128 Merge pull request #4252 from thinkyhead/rc_rename_hpb 
Replace PLA/ABS preheating with generic
 2016-07-12 20:00:33 -07:00
Scott Lahteine
1e14df876d Use varname as prefix in DEBUG_POS, string as suffix 2016-07-12 19:58:09 -07:00
Scott Lahteine
9e8b3e5ee6 Homing direction is irrelevant in probe raise! 2016-07-12 18:09:02 -07:00
Scott Lahteine
ecd5e810ac No delay for the smallest LCD moves 2016-07-12 18:09:01 -07:00
Scott Lahteine
2b9515d60f Merge pull request #4281 from AnHardt/lang-system 
Don't use UTF-strlen() if the text is not UTF
 2016-07-12 17:21:28 -07:00
Scott Lahteine
973a669aa3 Merge pull request #4264 from thinkyhead/rc_ultralcd_encoder_pos 
Remove extraneous conditions for encoder position
 2016-07-12 16:54:13 -07:00
Scott Lahteine
e9f62d8fdb Remove extraneous conditions for encoder position 2016-07-12 16:41:00 -07:00
Scott Lahteine
7c81398f95 Merge pull request #4279 from esenapaj/Follow-up-the-PR-#4271 
Follow-up the PR #4271 (X_DUAL_STEPPER_DRIVERS)
 2016-07-12 16:39:37 -07:00
Scott Lahteine
0554b65d22 Merge pull request #4284 from thinkyhead/rc_serial_ln_macros 
Sled-probe sanity fix, conditionals for remaining types of leveling
 2016-07-12 16:36:33 -07:00
Scott Lahteine
655c3fd55f Move delta ABL sanity checks up 2016-07-12 16:10:16 -07:00
Scott Lahteine
db0882d068 AUTO_BED_LEVELING_3POINT and DELTA_BED_LEVELING_GRID 2016-07-12 16:10:11 -07:00
Scott Lahteine
e974ac63ef Init matrix in planner.init 2016-07-12 15:55:27 -07:00
Scott Lahteine
47d55513ec Merge pull request #4280 from AnHardt/msg-file-upload 
Finalalize MSG_SD_WRITE_TO_FILE message with a \n
 2016-07-12 13:02:52 -07:00
AnHardt
b273736962 Make MAPPER_NON the fall back mapper 
Make MAPPER_NON the fall back mapper - if no other is defined.
One list less to maintain.
 2016-07-12 19:59:14 +02:00
AnHardt
54d35230df Don't use UTF-strlen() if the text is not UTF 2016-07-12 19:59:03 +02:00
Scott Lahteine
a1de96d152 Merge pull request #4278 from thinkyhead/rc_more_hotends_1 
Fixups for PID_ADD_EXTRUSION_RATE and HOTENDS==1
 2016-07-12 10:36:13 -07:00
AnHardt
87957c7b44 Finalalize MSG_SD_WRITE_TO_FILE message with a \n 
Finalalize MSG_SD_WRITE_TO_FILE message with a \n
else RH hangs.
 2016-07-12 13:13:04 +02:00
esenapaj
9b5cbf2423 Follow-up the PR #4271 (X_DUAL_STEPPER_DRIVERS) 
・Update a forgotten Configuration_adv.h of K8400
 2016-07-12 17:50:49 +09:00
Scott Lahteine
809da999dc Apply HOTEND_INDEX in preheat methods 2016-07-11 22:27:25 -07:00
Scott Lahteine
3d78b690e5 Single PID dataset with HOTENDS == 1 2016-07-11 22:27:24 -07:00
Scott Lahteine
bf9967c65d Apply HOTEND_INDEX in MILLISECONDS_PREHEAT_TIME 2016-07-11 22:27:24 -07:00
Scott Lahteine
11dcbae7a2 Only a single E axis. Can tool-change reseed position[E_AXIS]? 2016-07-11 22:27:24 -07:00
Scott Lahteine
4865447830 Merge pull request #4276 from esenapaj/Suppress-warnings 
Suppress warnings
 2016-07-11 19:08:59 -07:00
Scott Lahteine
815df28b0b Merge pull request #4274 from esenapaj/Follow-up-the-PR-#4024 
Follow-up the PR #4024 (Greek Language by @psavva)
 2016-07-11 19:04:44 -07:00
Scott Lahteine
44f739a5eb Merge pull request #4273 from esenapaj/Fix-for-the-PR-#4256 
Fix for the PR #4256 (Additional tweaks for HOTENDS == 1)
 2016-07-11 19:02:45 -07:00
Scott Lahteine
02f711fe00 Merge pull request #4275 from AnHardt/dont-deploy 
Don't deploy/stow the probe if z-min-endstop is used for homing
 2016-07-11 18:46:23 -07:00
Scott Lahteine
6a45aad893 Merge pull request #4272 from AnHardt/m100-rep 
Repair M100
 2016-07-11 18:45:13 -07:00
Scott Lahteine
243ad4312a Merge pull request #4271 from thinkyhead/rc_X_DUAL_STEPPER_DRIVERS 
X_DUAL_STEPPER_DRIVERS
 2016-07-11 18:38:45 -07:00
Scott Lahteine
6e68dd292b Merge pull request #4243 from thinkyhead/rc_fix_static_scrolling 
Improve STATIC_ITEM implementation
 2016-07-11 18:25:00 -07:00
Scott Lahteine
d17b161832 Don't draw current screen if simply changing screens 2016-07-11 18:14:04 -07:00
Scott Lahteine
096f9981d1 Scroll to the top when changing screens 2016-07-11 18:14:04 -07:00
Scott Lahteine
7ae84d768e Tweak conditionals for REPRAPWORLD_KEYPAD 2016-07-11 18:14:04 -07:00
Scott Lahteine
155af6b861 Rename vars, add comments for menu macros 2016-07-11 18:14:04 -07:00
Scott Lahteine
31f2cf5f6f Make encoderLine signed for proper compares 2016-07-11 18:14:03 -07:00
Scott Lahteine
d9f75f62c0 START_ROW => START_COL 2016-07-11 18:14:03 -07:00
Scott Lahteine
d2099fef0d Left-justify thermistor info 2016-07-11 18:14:03 -07:00
Scott Lahteine
85aeb02aa6 Invert headings on Graphical LCD 2016-07-11 18:14:03 -07:00
Scott Lahteine
3a67fb77b0 Concatenate LCD static strings 2016-07-11 18:14:02 -07:00
Scott Lahteine
13dc619f43 Scroll static screens more simply 2016-07-11 18:14:02 -07:00
Scott Lahteine
5051723c2e Redraw after cursor correction in STATIC_ITEM 2016-07-11 18:14:02 -07:00
esenapaj
58177a1602 Suppress warnings 2016-07-12 08:22:24 +09:00
Scott Lahteine
10ebf28ee3 Allow override of ENCODER_FEEDRATE_DEADZONE, lower default for Viki 2016-07-11 15:43:08 -07:00
Scott Lahteine
9b1ba1012a Support for VIKI2 with MKS Gen 1.3 / 1.4 2016-07-11 15:43:08 -07:00
Scott Lahteine
55dc8051d8 Cleanup of RAMPS LCD pins 2016-07-11 15:38:55 -07:00
AnHardt
7bcab26f2a Don't deploy/stow the probe if z-min-endstop is used for homing 
Don't deploy/stow the probe if z-min-endstop is used for homing.
Don't apply `zprobe_zoffset` if probe was not used.
 2016-07-11 22:01:44 +02:00
esenapaj
84ded1f659 Follow-up the PR #4024 (Greek Language by @psavva) 
・Update forgotten Configuration.h of K8400
 2016-07-12 04:19:09 +09:00
esenapaj
6af525e252 Fix for the PR #4256 (Additional tweaks for HOTENDS == 1) 2016-07-12 03:51:29 +09:00
AnHardt
23e0134596 Repair M100 
M100 D was running too long - caused watchdog resets.
M100 I showed more free memory than a Arduino Mega has RAM.
 2016-07-11 20:44:30 +02:00
Scott Lahteine
4b4a582c4f X_DUAL_STEPPER_DRIVERS implementation 2016-07-11 10:22:19 -07:00
Scott Lahteine
91bd6eade7 X_DUAL_STEPPER_DRIVERS configuration option 2016-07-11 10:22:19 -07:00
Scott Lahteine
6121c9018a Merge pull request #4265 from thinkyhead/rc_buzzer_patchup 
Two strategies to address a stuck buzzer
 2016-07-10 19:46:15 -07:00
Scott Lahteine
4a100c6832 Merge pull request #4250 from AnHardt/wait-for-cooling-slope 
Adjust wait_for_cooling slope
 2016-07-10 19:45:23 -07:00
Scott Lahteine
ed018c98d5 Merge pull request #4024 from thinkyhead/rc_greek_language 
Greek Language by @psavva
 2016-07-10 19:42:09 -07:00
Scott Lahteine
d1dffc7ad1 timestamp => endtime 2016-07-10 19:36:46 -07:00
Scott Lahteine
71674059c3 Two strategies to address a stuck buzzer 2016-07-10 19:25:23 -07:00
Scott Lahteine
928ff6487a Greek language pack from @psavva 2016-07-10 18:59:04 -07:00
AnHardt
e92e58df1f Adjust wait_for_cooling slope 
Adjust wait_for_cooling slope
and drop mintemp for cooling.

See
https://github.com/MarlinFirmware/Marlin/pull/4169#issuecomment-231544532
 2016-07-11 03:36:23 +02:00
Scott Lahteine
167f4aa0cc Merge pull request #4259 from clexpert/patch-3 
Update language_cz.h
 2016-07-10 18:26:23 -07:00
Scott Lahteine
8dda05e92a Merge pull request #4258 from clexpert/patch-2 
Total print time for LCD correction (hours:minutes format)
 2016-07-10 18:25:18 -07:00
Scott Lahteine
182c8d7f8f Dyze High Temp Thermistor Support 2016-07-10 17:59:05 -07:00
Scott Lahteine
5b0e46c986 Merge pull request #4256 from thinkyhead/rc_fix_singlenozzle_temp 
Additional tweaks for HOTENDS == 1
 2016-07-10 17:57:00 -07:00
Scott Lahteine
ee0983ab57 Further reduction when HOTENDS == 1 2016-07-10 16:54:30 -07:00
Scott Lahteine
3e1bbd5e27 Indentation in gcode_M100 2016-07-10 16:33:51 -07:00
Scott Lahteine
b72238f406 Invariant get_pid_output with HOTENDS < 2 2016-07-10 16:33:51 -07:00
Petr Zahradnik
66602f4af6 Update language_cz.h 
New strings:
#define MSG_HALTED
#define MSG_PLEASE_RESET
Some texts shortened for smaller displays.
 2016-07-10 13:25:50 +02:00
Petr Zahradnik
eaf9e615ce Total print time for LCD correction (hours:minutes format) 2016-07-10 13:08:05 +02:00
esenapaj
9e56d5825e Adjust spacing 2016-07-10 14:25:29 +09:00
esenapaj
5832f4b848 Follow-up the PR #4253 (Runout Sensor without SD Card, Print Timer support in M104) 
・Update forgotten example configuration files
 2016-07-10 14:24:57 +09:00
Scott Lahteine
77283f5bf0 Merge pull request #4245 from thinkyhead/rc_simpler_therm_check 
Simpler/extensible thermistor test in thermistortables.h
 2016-07-09 21:13:42 -07:00
Scott Lahteine
f9e08b1fcd Merge pull request #4254 from AnHardt/killscreen 
Add a kill-screen
 2016-07-09 20:44:42 -07:00
AnHardt
faac2bcfdb Add a kill-screen 2016-07-10 04:50:45 +02:00
Scott Lahteine
3b3e52616c Merge pull request #4253 from thinkyhead/rc_clexpert_runout 
Runout Sensor without SD Card, Print Timer support in M104
 2016-07-09 19:10:36 -07:00
Scott Lahteine
aa3ab93971 Merge pull request #4240 from AnHardt/sampler-8-7-16 
Today's fix and cleanup collection
 2016-07-09 19:09:45 -07:00
Scott Lahteine
4cd045791c Reduce code size by trusting the compiler 2016-07-09 18:17:44 -07:00
Scott Lahteine
a8538bd7ce General cleanup, code reduction in Marlin_main.cpp 2016-07-09 18:17:44 -07:00
Scott Lahteine
1026e5b071 Replace PLA/ABS preheating with generic 2016-07-09 18:06:51 -07:00
Petr Zahradnik
e282d69f63 Print job timer comment changed 2016-07-09 17:57:54 -07:00
Petr Zahradnik
a2159cfbc3 Error message change in SanityCheck.h 2016-07-09 17:57:54 -07:00
Petr Zahradník junior
315b4c2153 Runout sensor without SD Card 2016-07-09 17:57:53 -07:00
Scott Lahteine
51c9c3fe2c Indentation in MarlinSerial.cpp 2016-07-09 17:57:53 -07:00
Scott Lahteine
e03414b2dd Simpler/extensible thermistor test in thermistortables.h 2016-07-08 19:54:45 -07:00
AnHardt
4b44a23a36 Add TX-buffer for MarlinSerial 
Similar to the current Arduino HardwareSerial
but with max. 256 byte buffer-size.

Deactivated by default.

The boards with AT90USB processor (USBCON) already use a TX-buffer.
 2016-07-08 17:25:21 +02:00
AnHardt
468f7f03a2 homeaxis() can leave early 
when no known axis needs to be homed.

Most changes are only caused from altering the indentation.
```
if (axis == X_AXIS ? HOMEAXIS_DO(X) : axis == Y_AXIS ? HOMEAXIS_DO(Y) : axis == Z_AXIS ? HOMEAXIS_DO(Z) : 0) {
  ...
}

to

if (!(axis == X_AXIS ? HOMEAXIS_DO(X) : axis == Y_AXIS ? HOMEAXIS_DO(Y) : axis == Z_AXIS ? HOMEAXIS_DO(Z) : 0)) return;
...

```
 2016-07-08 15:59:33 +02:00
AnHardt
eff7912243 Ensble/disable hardware endstops in G28 globally. 
For moving away from the endstops we do not have to disable them.
They are not tested anyway.
 2016-07-08 15:49:10 +02:00
AnHardt
f69434d81c Eliminate void setup_for_endstop_move() 2016-07-08 15:23:20 +02:00
AnHardt
0ea6247fc2 Use logic in Z_SAFE_HOMING 
Use logic in Z_SAFE_HOMING

From
```
if (home_all_axis || homeZ) {
  if (home_all_axis) {
  ...
  home z
  }
  else if (homeZ) { // Don't need to Home Z twice
  home z
  }
}

```
to
```
if (home_all_axis || homeZ) {
  if (home_all_axis) {
  ...
  }
  home z
}
```
 2016-07-08 15:08:50 +02:00
AnHardt
de3a169336 Always define MIN_Z_HEIGHT_FOR_HOMING even if 0 
Always define MIN_Z_HEIGHT_FOR_HOMING even if 0
Always make a potential rise to `home_offset[Z_AXIS]` possible in G28.
Get rid of some very ugly constructs in MBL (ultralcd.cpp).
 2016-07-08 15:08:32 +02:00
AnHardt
88ed232f53 Remove HAS_BED_PROBE case in first raise in G28 
Differentiating made sense here when we could save a dozen lines of code,
but not for one line.
 2016-07-08 14:59:44 +02:00
AnHardt
653eff3b31 Clean up quick_home_xy() 
Since we do the actual homing now in the 'normal' routines `quick_home_xy()`
can be simplified to a relative simple diagonal move.
 2016-07-08 14:59:27 +02:00
Scott Lahteine
98d0167a57 Merge pull request #4226 from thinkyhead/rc_emergency_command_parser 
MarlinSerial emergency-command parser (with M108)
 2016-07-07 16:53:55 -07:00
Scott Lahteine
2ee4e4f791 Make wait_for_heatup volatile 2016-07-07 16:37:23 -07:00
Scott Lahteine
bd5a825b8b Wait for end of line before invoking action 2016-07-07 16:37:23 -07:00
Scott Lahteine
ea47803ae2 Simplify emergency parser (only parse initial command) 2016-07-07 16:37:22 -07:00
Scott Lahteine
834ad14c8d Add quickstop_stepper to update current position with stepper.quick_stop() 2016-07-07 16:37:22 -07:00
Scott Lahteine
ecffe92e20 Group EMERGENCY_PARSER commands 2016-07-07 16:37:22 -07:00
AnHardt
a129078927 Add an emergency-command parser to MarlinSerial (supporting M108) 
Add an emergency-command parser to MarlinSerial's RX interrupt.

The parser tries to find and execute M108,M112,M410 before the commands disappear in the RX-buffer.

To avoid false positives for M117, comments and commands followed by filenames (M23, M28, M30, M32, M33) are filtered.

This enables Marlin to receive and react on the Emergency command at all times - regardless of whether the buffers are full or not. It remains to convince hosts to send the commands. To inform the hosts about the new feature a new entry in the M115-report was made. "`EMERGENCY_CODES:M112,M108,M410;`".

The parser is fast. It only ever needs two switch decisions and one assignment of the new state for every character.

One problem remains. If the host has sent an incomplete line before sending an emergency command the emergency command could be omitted when the parser is in `state_IGNORE`.
In that case the host should send "\ncommand\n"

Also introduces M108 to break the waiting for the heaters in M109, M190 and M303.

Rename `cancel_heatup` to `wait_for_heatup` to better see the purpose.
 2016-07-07 16:37:22 -07:00
Scott Lahteine
9f42b1a075 Merge pull request #4235 from thinkyhead/rc_revert_quickhome_test 
Fix quick homing, tweak MIN_Z_HEIGHT_FOR_HOMING
 2016-07-07 13:37:14 -07:00
Scott Lahteine
ad968f2325 Merge pull request #4234 from thinkyhead/rc_better_position_logging 
Move XYZ in print_xyz and DEBUG_POS to the front
 2016-07-07 12:31:15 -07:00
Scott Lahteine
4036c73cdd Don't raise Z if only homing Z 2016-07-07 12:28:37 -07:00
Scott Lahteine
0b6f8f8244 Apply MIN_Z_HEIGHT_FOR_HOMING raise literally 2016-07-07 12:25:02 -07:00
Scott Lahteine
177ec20bf0 Revert quick-home changes 2016-07-07 12:17:34 -07:00
Scott Lahteine
9c5b462ef2 Move XYZ in print_xyz and DEBUG_POS to the front 2016-07-07 11:42:19 -07:00
Scott Lahteine
4e84c803a3 Merge pull request #4232 from thinkyhead/rc_no_axis_codes_needed 
Don't use axis_codes if a literal will do
 2016-07-06 20:05:16 -07:00
Scott Lahteine
e2f7cb0905 Don't use axis_codes if a literal will do 2016-07-06 18:37:21 -07:00
Scott Lahteine
6559f7359f Fix comment on Z raise for homing, save a few bytes 2016-07-06 16:21:51 -07:00
Scott Lahteine
799c60cadc Merge pull request #4217 from thinkyhead/rc_fix_homing_raise 
Don't do_probe_raise with MIN_Z_HEIGHT_FOR_HOMING
 2016-07-06 14:39:37 -07:00
Scott Lahteine
d7e9647505 Sanity Check for probe raises 2016-07-06 13:46:06 -07:00
Scott Lahteine
d0b29cabf3 Don't re-home X and Y if you quick homed 2016-07-06 13:46:06 -07:00
Scott Lahteine
e0a6b978f5 Don't do_probe_raise with MIN_Z_HEIGHT_FOR_HOMING 2016-07-06 13:46:05 -07:00
Philip Schell
cf8ec1216a Update language_de.h for German translation 
@MarlinFirmware/language-team my changes for the German language. Feel free to improve :)
 2016-07-06 21:44:16 +02:00
petrzjunior
b81b77111b Update language_cz.h 2016-07-06 21:04:34 +02:00
Scott Lahteine
7735ec5e7a Merge pull request #4223 from thinkyhead/rc_rename_heatup 
Change cancel_heatup to wait_for_heatup
 2016-07-06 11:25:44 -07:00
Scott Lahteine
160a2be117 Change cancel_heatup to wait_for_heatup 2016-07-06 09:17:50 -07:00
AnHardt
16c83d203b Make use of the good features of a sled probe for all probes. 
Move and extend axis_unhomed test to deploy/stow_z_probe().
Move and extend position store/restore to deploy/stow_z_probe().

Now all kinds of probes can use the 'E' parameter in G29/M48.
Allen key probes can be used now for grid and 3-point levelling.

Deploying the Allen Key probe uses big moves in z direction.
Too dangerous for an unhomed z-axis.
Throw a compile time error when we try to configure an
Allen Key probe homing to z-min and having no other z-min-endstop.
 2016-07-06 04:11:04 +02:00
AnHardt
8555816a11 Generalize and simplify 'triggered when stowed test` 
The `PROBE_IS_TRIGGERED_WHEN_STOWED_TEST` is able to detect if a probe is
successfully deployed/stowed.
It was part of the Allen Key probes code only.
Now the function is generally available.

Currently this test is compulsory for Allen Key probes to not alter the used behaviour
If you want to add the test for an other type of probe simply add
```
#define PROBE_IS_TRIGGERED_WHEN_STOWED_TEST
```
to your config.
 2016-07-06 03:56:17 +02:00
AnHardt
5126cce7fd Move Allen Key probe move scripts to their own functions 
There was an hidden extra move after the scripts. This is configurable now.
Added the extra moves to the relevant configs.
 2016-07-06 03:46:40 +02:00
AnHardt
7d063c111c Add a optional feedrate parameter to do_blocking_move() 
Add a optional feedrate parameter to `do_blocking_move()` and its companions.
 2016-07-06 03:46:34 +02:00
Scott Lahteine
b114b6a0b3 Save 152 bytes using uint8_t for command indices 2016-07-05 16:29:28 -07:00
Scott Lahteine
0d4ff0c48b Allow the queue to be cleared from within commands 2016-07-05 16:25:20 -07:00
Scott Lahteine
c450851401 Merge pull request #4209 from AnHardt/too-high-G28 
Make raise for probe deploy relative in homeaxis()
 2016-07-05 11:07:42 -07:00
AnHardt
f799f18388 MBL typo 2016-07-05 18:19:53 +02:00
AnHardt
8b02e68cb6 Make raise for probe deploy relative in homeaxis() 
Make raise for probe deploy relative in homeaxis()
by setting `current_position[axis]` to zero later.
 2016-07-05 10:42:33 +02:00
Scott Lahteine
e48502866b Merge pull request #3611 from alephobjects/M108_cancel_heatup 
Introduce M108 cancel wait for heatup/cooldown of the hotend and bed
 2016-07-04 01:19:31 -07:00
Scott Lahteine
d70197f514 Merge pull request #4204 from thinkyhead/rc_fix_gcode_t_position 
Additional patches for gcode_T position change
 2016-07-04 01:16:22 -07:00
Scott Lahteine
869b517589 Merge pull request #4205 from thinkyhead/rc_fixup_unit_references 
References to millimeters in code comments need an update
 2016-07-04 01:15:34 -07:00
Scott Lahteine
e104b91ea6 References to millimeters in code comments need an update 2016-07-03 20:13:29 -07:00
AnHardt
ff91d28a3a Remove wants_to_cool warning 
Remove wants_to_cool warning
 2016-07-04 03:12:11 +02:00
Scott Lahteine
c9e536cf87 Additional patches for gcode_T position change 2016-07-03 18:11:02 -07:00
Scott Lahteine
60865fc45b Merge pull request #4202 from thinkyhead/rc_fix_gcode_t_position 
Fix position adjustment with gcode_T and MBL
 2016-07-03 17:55:43 -07:00
Scott Lahteine
f841038313 Merge pull request #4201 from thinkyhead/rc_info_fit 
Shorter labels for Print Stats info
 2016-07-03 17:47:00 -07:00
Scott Lahteine
f31af61ee2 Fix position adjustment with gcode_T and MBL 2016-07-03 17:44:04 -07:00
Scott Lahteine
a8f5c2bf96 Merge pull request #4192 from birkett/k8400 
Add Velleman K8400 board support.
 2016-07-03 17:41:13 -07:00
Scott Lahteine
ef8980bfa0 Shorter labels for Print Stats info 2016-07-03 16:00:24 -07:00
Scott Lahteine
2ed625dafa Fix compiler warnings for static screens 2016-07-03 15:26:17 -07:00
Anthony Birkett
e77844594d readme.md -> README.md 2016-07-03 22:15:24 +01:00
Anthony Birkett
a0b00d29e3 Add a ported example configuration for the Velleman K8400 (Vertex) printer. 
Supports both dual and single head printers (with the correct config).
Includes community sourced feed rate fix.

Rename / move files.

Remove redundant definitions.
 2016-07-03 22:09:08 +01:00
lrpirlet
9b42c6b44b apply correction when swtiching from MBL to physical in G28 X 2016-07-03 21:43:42 +02:00
Andrea Cimbalo
46196e9ee5 Add working PlatformIO support 2016-07-03 15:33:24 +02:00
esenapaj
95347fc650 Follow-up the PR #3662 (Rewritten FILAMENT_CHANGE_ENABLE feature) 
・Update a forgotten Configuration_adv.h of Cartesio
 2016-07-03 09:04:29 +09:00
Scott Lahteine
a06c5165a7 Shorter strings for smaller LCDs 2016-07-02 15:47:16 -07:00
Scott Lahteine
982f10e6a0 Use STATIC_ITEM for LCD message display 2016-07-02 15:47:15 -07:00
Petr Zahradnik
43ff0ce35f Rewritten FILAMENT_CHANGE_ENABLE feature 2016-07-02 15:34:33 -07:00
Scott Lahteine
51b7820686 Patch up About Printer sub-menus 2016-07-02 15:22:34 -07:00
Scott Lahteine
439e78147d Static menu items take an optional string, LJ by default 2016-07-02 15:22:34 -07:00
Scott Lahteine
fa9b2a925d Tweak spacing in printcounter.cpp 2016-07-02 15:22:33 -07:00
Scott Lahteine
dbfc87cdcf Squish sanity check for build info 2016-07-02 15:22:33 -07:00
Anthony Birkett
7a377c1d75 Add "About Printer" information menu. 
Includes:
  *firmware version / branch / date.
  *extruder count
  *board information (name, serial details, power supply type)
  *thermistors (names, min/max temperatures)
  *printer statistics (PRINTCOUNTER details)

Thanks to @thinkyhead for contributions.
 2016-07-02 15:22:26 -07:00
Scott Lahteine
77a923d8ce Merge pull request #4186 from thinkyhead/rc_array_macros 
Simplified variable-size array macros
 2016-07-01 20:48:12 -07:00
Scott Lahteine
e650a75b88 Simplified variable-size array macros 2016-07-01 20:36:05 -07:00