2fd8c248fe
Added Fan control to the pre-heat settings.
...
I find that the PID routine works better when the cooling fan is switched on
at the beginning of a warm up routine. Otherwise when you enable the fan
just before a print, you have a delay as the PIDre-adjusts.
This should also be safer as most cooling fans are directed at the hot -ends
thermal barrier!
2012-02-22 23:05:52 +00:00
d9f2f509d5
Added new menu items under the prepare submenu.
...
Instead of a single pre-heat, now there is pre-heat ABS and PLA options
Added defines to the configuration file to adjust preheat temperatures for both
2012-02-22 22:51:04 +00:00
ae3e7586c6
Added HOME_POS. This adds the posibility to make the center 0
...
Updated the Xsteps ... settings via the LCD menu
2012-02-22 18:07:56 +01:00
df1437bd86
Changed display format for some numbers.
2012-02-21 23:05:43 +01:00
8816ef1c64
Small fixes after merge
2012-02-21 20:36:43 +01:00
d298dd121f
merged SBUBA82 and Justblair
2012-02-21 20:26:59 +01:00
2cc9a89830
Merge remote-tracking branch 'SCUBA82/Marlin_v1' into Marlin_v1
2012-02-21 20:17:35 +01:00
a0a1f81913
various changes
2012-02-21 20:17:28 +01:00
8a8ea50f33
fixed manual axis movement lcd option
2012-02-21 09:31:28 +01:00
b976692d0f
Removed VS project files for tidyness stakes
2012-02-20 22:39:39 +00:00
fe940a142d
Added a structure that will allow easy translations/modifications to the LCD menu.
...
Signed-off-by: Blair Thompson <mail@justblair.co.uk >
2012-02-20 22:22:46 +00:00
b3fb09a20c
change preheat to ABS values of nozzle 227 and be 105 °C
...
next try for manual axis movement
2012-02-20 16:07:27 +01:00
6a3f8cf23f
Infos about fuses to use; correct fuses in boards.txt
2012-02-20 10:25:51 +01:00
a05a261b72
Added a workaround. Ramps SD card does not have sdcarddetect. My temporary solution is to add a momentary swtich
...
that pulls down the SDCARDDETECT pin and mimicking the pull and reinsert ofa a SD card
2012-02-18 23:56:31 +00:00
1b6765ed12
Updated the pin config for RAMPS 1.3 to include ultimaker new style LCD/Rotary Encoder interface
2012-02-18 18:25:04 +00:00
1ff99ae25f
ATMega1284P support for Arduino IDE
...
replace $ARDUINO_HOME/hardware/tools/avr/etc/arduino.conf with this file
2012-02-17 11:41:47 +01:00
234fe8ea67
added infos for this fork
2012-02-17 11:07:24 +01:00
e661578c84
support for GEN7 1.1,1.2 and 1.3
2012-02-17 10:46:48 +01:00
73344e69c1
Added temperature offset/gain settings for AD595.
2012-02-16 11:05:08 +01:00
d309565b56
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
...
Conflicts:
Marlin/Configuration.h
2012-02-13 13:07:55 +01:00
3f20f37c78
Merge remote branch 'upstream/Marlin_v1' into Marlin_v1
2012-02-13 12:39:00 +01:00
0e3631ff4b
smaller changes
2012-02-13 12:31:53 +01:00
fa2e1be0ca
changed default EXTRUDE_MINTEMP to 170.
2012-02-12 17:38:54 +01:00
7699f250e3
Fixed small merge bug
2012-02-12 14:06:08 +01:00
11518a987f
merged with triffid fork
2012-02-12 13:58:36 +01:00
b447815de5
removed unused HEATING_EARLY_FINISH_DEG_OFFSET
...
Simplified stepper inactive time
2012-02-12 18:02:12 +08:00
bde30b2b48
Corrected e-length calculation in planner
2012-02-12 18:02:12 +08:00
13e185d330
removed unused HEATING_EARLY_FINISH_DEG_OFFSET
...
Simplified stepper inactive time
2012-02-11 23:22:16 +01:00
b58eae7657
Corrected e-length calculation in planner
2012-02-11 18:36:42 +01:00
3e7fcb813e
Merge pull request #61 from daid/Marlin_v1
...
Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.
2012-02-11 07:36:24 -08:00
2a77c84c8f
Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.
2012-02-11 16:02:47 +01:00
d47a3e5950
Changed check i mtion_conrol
...
if (millimeters_of_travel == 0.0) => if (millimeters_of_travel < 0.001)
(thanks mooselake)
2012-02-09 21:02:01 +01:00
f87c80889f
Fixed M109 timer overflow (reported by triffid)
2012-02-09 20:54:49 +01:00
154de69c02
Print configuration.h version during startup (thanks hairykiwi)
2012-02-09 20:26:17 +01:00
6ef8459494
Corrected distance calculation. (thanks jv4779)
2012-02-09 19:53:06 +01:00
598eb1d4f1
Fixed compilation for gcc-4.6.2 with avr-lib-1.8.0 (thanks daid)
2012-02-09 19:38:53 +01:00
9173a5713b
Teensylu support.
2012-02-09 19:27:45 +01:00
da040fd393
Fixed ultimaker heater 1 pins. (Thanks daid)
2012-02-09 17:19:45 +01:00
bdb70c0509
Warning for 10k thermistor
2012-02-08 18:38:45 +01:00
5113513cb2
RC 1
2012-02-08 18:28:54 +01:00
d8a0c6450f
Split the configuration file in two parts.
...
One for common settings.
One for advanced settings.
2012-02-07 20:23:43 +01:00
4cc8e37bf1
lcd menue "move_axis" added
2012-02-07 12:58:05 +01:00
b5fae1104b
fixed sUICIDE_PIN disable
2012-02-07 08:50:26 +01:00
f9c5333f97
Made "stop heating wait" optional.
...
Default off.
2012-02-06 20:13:44 +01:00
292ddd2edb
Fix Z_LATE_ENABLE
2012-02-06 17:38:16 +01:00
25cd8af536
added arduino ide GEN7 support Files
2012-02-06 14:11:25 +01:00
14702089ee
-disable TEMP Min MAX Kill while using PS_ON Pin
...
ON GEN7 there is no temperature reading when power is off.. so Marlin
would kill itself. There seems to be an update from "Traumflug" on GEN7
using standby VCC for thermistors.
2012-02-06 12:28:33 +01:00
b51e8bf7e5
-disabled CARDDETECT if PIN is set to -1
...
- redo disable Beeper if PIN is set to -1
2012-02-06 12:22:44 +01:00
3183a14755
-added Configuration for GEN7 which worked for me
2012-02-06 12:12:18 +01:00
5edef148fe
-disalbe beeper if BEEPER_PIN = -1
2012-02-06 12:10:32 +01:00
