37cde8a191
Report changes from previous PR from old code base including :
...
I've updated the minimum values from the LCD.
It has been a while that i want to at least fix this.
I have an inductive probe and often i need to set my zOffset to something lower than 0.5.
With the current implementation, the default LCD value is set to 0.5 for some reason.
On my case i need to be able to set it down to 0.0 as my inductive probe can be lower than 0.5.
Before with the LCD we couldn't change this value below 0.5. We had to flash the firmware every time which was painful.
Now we are able to change this value down to 0.0 if needed.
I've also changed the minimum value for Z min acceleration.
In the default configuration it's set to 25 but on the LCD the minimum was 100 which is not coherent.
I've changes the minimum to 10. On this axis, depending on the mechanics/motor drivers we might require very low acceleration, so i guess 10 is somehow realistic.
2015-03-23 12:29:12 +01:00
b26a3ea02c
Merge pull request #1662 from josla972/refactor_scara
...
Refactor SCARA calibration. Save some lines of code and possibly ROM.
2015-03-23 00:51:18 -07:00
e6f6c6e3a1
fix bad insertion config again
2015-03-23 08:32:48 +01:00
7717e1ce33
Fix bad insert in configuration
2015-03-22 21:48:46 -07:00
146501215f
Fix mangled probe_pt calls
...
- Address issue #1669
- Remove the TOPO_ORIGIN configuration setting
2015-03-22 21:45:20 -07:00
15345cc249
Corrected Z_PROBE_ALLEN_KEY behaviour.
2015-03-22 13:54:51 +02:00
0f034dd97e
Clean up Z_RAISE_AFTER_PROBING to work the same in all code paths except Z_PROBE_SLED.
2015-03-22 13:54:45 +02:00
6c96f32069
Blind fix for #1507
2015-03-22 13:54:21 +02:00
379348487e
Removed malplaced comment.
2015-03-22 12:21:31 +01:00
8bd6e37b21
Merge pull request #1661 from thinkyhead/G92_no_offset
...
Don't add home offsets in G29
2015-03-21 16:49:06 -07:00
582cd780cd
Fix compile error with *_DUAL_STEPPER_DRIVERS
...
- Patch up macros in stepper.cpp
2015-03-21 16:43:47 -07:00
9b3462f73f
Refactor SCARA calibration. Save some lines of code and possibly ROM.
2015-03-22 00:37:24 +01:00
691e753cc3
Don't add home offsets in G29
...
- Address #1262 by leaving values as set
- Rename `add_homing` to `home_offset`
2015-03-21 16:30:02 -07:00
9b639b4135
Merge pull request #1619 from epatel/manual-bed-leveling+mesh-bed-level
...
Manual bed leveling + mesh bed leveling
2015-03-21 15:39:42 -07:00
3703694e30
Fix temperature min/max test
...
- Base tests on all thermistors/thermocouples, not just heater 0
2015-03-21 14:23:43 -07:00
3d0a060a7a
Added G29 command
2015-03-21 14:50:47 +01:00
c516747847
Merge branch 'Development' into manual-bed-leveling+mesh-bed-level
2015-03-21 14:49:52 +01:00
64e3d33893
Fix shrinked menucode
...
by updating 'encoderPosition' in END_MENU() line 1.
2015-03-20 23:36:14 +01:00
a7e89d4cfa
Merge branch 'Development' into manual-bed-leveling+mesh-bed-level
2015-03-20 15:46:01 +01:00
2176a22d42
Fix count_direction initializer
...
- Addressing #1625
2015-03-20 05:45:05 -07:00
5644ad6809
Fix hiliting of edit items
2015-03-20 04:29:35 -07:00
526a755a66
Merge pull request #1652 from AnHardt/PIDdebug
...
PID debug
2015-03-20 04:14:08 -07:00
5112cf8422
Added comment for the EEPROM storage
2015-03-20 11:46:47 +01:00
4619d80524
Merge branch 'Development' into manual-bed-leveling+mesh-bed-level
2015-03-20 11:45:06 +01:00
199151a4ed
Merge pull request #1650 from AnHardt/beautify
...
Beautivy statusscreen
2015-03-20 03:38:02 -07:00
2424713a8f
Merge pull request #1640 from AnHardt/warning6
...
codepos not used in gcode_M28()
2015-03-20 02:58:00 -07:00
e85061d20d
Added changes to the 'new' Configuration.h s
2015-03-20 10:36:29 +01:00
a61f679568
Merge branch 'Development' into manual-bed-leveling+mesh-bed-level
2015-03-20 02:28:35 +01:00
c87faa69ed
Shortened mesh_plan_buffer_line()
2015-03-20 02:18:49 +01:00
47c1ea72af
Merge https://github.com/kieranc/Marlin into PIDdebug
...
Conflicts:
Marlin/temperature.cpp
Cleaned merge conflict.
Codeposition had changed.
Variable pid_input had vanished.
Signed-off-by: AnHardt <github@kitelab.de >
2015-03-20 00:07:36 +01:00
f1d3d1524d
Merge branch 'optimize_menu_code' of https://github.com/thinkyhead/Marlin into beautify
...
Conflicts:
Marlin/dogm_lcd_implementation.h
solved merge conflict.
2015-03-19 22:51:22 +01:00
fa889cd6e1
Beautivy statusscreen
...
by shifting things some pixels around
2015-03-19 22:13:37 +01:00
7279e4f82f
Small code tweaks re lcd.print
2015-03-19 14:01:33 -07:00
90ba61b9b8
Include indicator for new drawmenu_generic
...
In the new method we pass the character that should be used for
selected state, not the character to print always.
2015-03-19 13:49:06 -07:00
15d29efad5
Pass sel to lcd_implementation_mark_as_selected
...
- Pass selected state directly to lcd_implementation_mark_as_selected
- Rename sel function parameter
- Include a minor fix for SdBaseFile.h
2015-03-19 13:40:36 -07:00
a547dc2148
Merge branch 'Development' into optimize_menu_code
...
Get upstream changes
2015-03-19 13:31:37 -07:00
e650d4044e
Fix "Stop Print" function in the LCD menu
...
When one hit "Stop Print" option in LCD menu, the command buffer was not
cleared. The printer keep moving until the buffer has been emptied.
Actually I could not clear the command buffer as well.. I don't know
why, it doesnt work as expected.
I need to implement a routine inside Stepper ISR to handle such
situation.
2015-03-19 14:16:18 -03:00
ae01a6b5f2
Make use of codepos.
...
Saves one addition.
Needs one pointer on the stack.
Don't know if this is a go trade.
2015-03-19 09:45:16 +01:00
a534ac197a
Merge pull request #1621 from AnHardt/remove--6x9-font
...
Remove 6x9 font
2015-03-18 23:10:42 -07:00
80e0ee10ca
Merge pull request #1631 from AnHardt/iss1593
...
Decrease KILL_DELAY
2015-03-18 19:10:38 -07:00
4ce79920e5
Merge pull request #1635 from AnHardt/warnings1
...
Negative times are unlikly
2015-03-18 19:10:12 -07:00
76127b8a55
Merge pull request #1630 from Wurstnase/fix_g29
...
optional parameters must be named when ignoring order
2015-03-18 19:09:40 -07:00
be3f2dc1d9
Merge pull request #1636 from AnHardt/warning2
...
lcd_control_retract_menu() is conditional.
2015-03-18 19:09:05 -07:00
8d396584bf
Merge pull request #1637 from AnHardt/warning3
...
lcd_autostart_sd() has two conditions.
2015-03-18 19:08:33 -07:00
8664c6d465
Merge pull request #1638 from AnHardt/warning4
...
delta[3] not used when DELTA not defined.
2015-03-18 19:07:55 -07:00
10711ccc6a
Merge pull request #1639 from AnHardt/warning5
...
G4 could wait for an undefined time
2015-03-18 19:07:14 -07:00
28c91deb5c
EEPROM saving of z_values.
...
Tried to make it a little intelligent.
2015-03-18 21:07:07 +01:00
240b5cfe04
Merge branch 'Development' into manual-bed-leveling+mesh-bed-level
2015-03-18 19:19:46 +01:00
4521f6655b
Restore "S" parameter of M204 for retrocompatibility.
2015-03-18 12:19:30 -03:00
5ddb8d94e2
Update Documentation related to M204
2015-03-18 11:09:10 -03:00
