Bob Kuhn
1a5cbc9052
Fix STM401/4xx/STM32F7xx timers, STEVAL_3DP001V1 warning ( #16621 )
2020-01-20 18:33:36 -06:00
thinkyhead
f36225c3e0
[cron] Bump distribution date (2020-01-21)
2020-01-21 00:07:07 +00:00
InsanityAutomation
97b5a5f469
Provide methods for M420 + MBL ( #16602 )
2020-01-20 01:44:36 -06:00
Bob Kuhn
a1f5245e27
L64xx M906 Fix status variable, formatting ( #16597 )
2020-01-20 01:15:00 -06:00
Giuliano Zaro
ef8f829513
Fix CHAMBER_MAXTEMP security margin ( #16600 )
2020-01-20 00:44:51 -06:00
InsanityAutomation
d9cdb4ae19
Move steps/mm out of slim menus ( #16603 )
2020-01-20 00:43:19 -06:00
0r31
451062553e
LPC1768: Allow I2C master channel override ( #16584 )
2020-01-19 23:59:06 -06:00
InsanityAutomation
0fcf2b1110
Quad Z stepper support ( #16277 )
2020-01-19 23:35:07 -06:00
0r31
f36f084465
Fix Greek language string ( #16601 )
2020-01-19 23:03:19 -06:00
Jason Smith
439e73d79c
AVR sanity check for MONITOR_DRIVER_STATUS with SW Serial ( #16421 )
2020-01-19 22:25:38 -06:00
ellensp
0547d9d651
Reset shutdown timer on M85 ( #16587 )
2020-01-19 22:24:12 -06:00
thisiskeithb
3b34fbd4c4
Update BTT002 pins ( #16591 )
2020-01-19 22:21:32 -06:00
Giuliano Zaro
aec211fc80
SAMD51: ADC for probe temperature compensation ( #16596 )
2020-01-19 22:17:08 -06:00
Bob Kuhn
1084068a3e
Simplify a drivers.h macro ( #16589 )
2020-01-19 20:59:47 -06:00
Scott Lahteine
e9ae585647
Patch for _STEP_INIT
2020-01-19 20:50:33 -06:00
Scott Lahteine
dda76e50a9
Use bool in pin compare
2020-01-19 20:05:53 -06:00
Scott Lahteine
37849969ad
Function-like macros
2020-01-19 20:01:22 -06:00
Scott Lahteine
707349d492
Updates for L64XX
2020-01-19 19:53:12 -06:00
Scott Lahteine
f6a6839a82
Simplify TMC monitor code
2020-01-19 19:29:30 -06:00
Scott Lahteine
79c2f05e7d
Fix M112 with Emergency Parser
2020-01-19 19:00:24 -06:00
thinkyhead
4dca6d50c0
[cron] Bump distribution date (2020-01-20)
2020-01-20 00:06:48 +00:00
thinkyhead
23fc81f1af
[cron] Bump distribution date (2020-01-19)
2020-01-19 00:07:06 +00:00
Scott Lahteine
d035bfb1a9
Allow RRW Keypad with any LCD
2020-01-18 14:48:24 -06:00
thinkyhead
80400ab3f8
[cron] Bump distribution date (2020-01-18)
2020-01-18 00:04:25 +00:00
tompe-proj
a338dce83f
PINDA v2 temperature sensor / compensation ( #16293 )
2020-01-17 17:16:45 -06:00
George Fu
4108c5d01f
Update FYSETC S6 pins ( #16559 )
2020-01-17 13:16:05 -06:00
vivian-ng
e94f782f51
Shared SPI sanity check ( #16581 )
2020-01-17 02:54:22 -06:00
Scott Lahteine
a578749622
Clean up HAL ADC, old test scripts
2020-01-17 02:44:01 -06:00
Bob-the-Kuhn
0d0dfba203
STM32 soft SPI. STEVAL_3DP001V1 SD read. M906 tweaks. ( #16579 )
2020-01-17 02:44:01 -06:00
thinkyhead
91a399ae7f
[cron] Bump distribution date (2020-01-17)
2020-01-17 00:06:39 +00:00
felixstorm
2b9eb4437b
ESP32 HAL: Fix random pauses during prints ( #16548 )
2020-01-16 05:57:14 -06:00
ellensp
5bd66241df
Fix TOUCH_UI_FTDI_EVE bugs ( #16540 )
2020-01-16 05:50:00 -06:00
Scott Lahteine
1bb1ce7475
Move macros to stepper/indirection
2020-01-16 05:25:16 -06:00
Jason Smith
c305c2cc6b
Fix some warnings, Melzi pins
2020-01-15 19:57:16 -06:00
dagorel
bda4957f9b
Fix I2C address of MCP4728 on LPC176x ( #16578 )
2020-01-15 19:15:54 -06:00
thinkyhead
bc483b2354
[cron] Bump distribution date (2020-01-16)
2020-01-16 00:08:10 +00:00
Dennis
2d7f94cae1
Adjustable ADC debounce delay ( #16264 )
2020-01-15 18:06:03 -06:00
gjdodd
7481563bd9
Nikon IR support for time lapse photos ( #16539 )
2020-01-15 17:59:41 -06:00
Scott Lahteine
b419ca254b
Fix typo
2020-01-15 01:27:32 -06:00
thisiskeithb
7eed008e8e
Use Flash EEPROM on BTT002 ( #16558 )
2020-01-15 01:27:32 -06:00
Bob Kuhn
53dfeed6c0
Steval_3DP001V1 timers, analog inputs, etc. ( #16565 )
2020-01-14 23:19:13 -06:00
Lino Barreca
ef513ef7fb
Fix build error with unsupported reset flags ( #16562 )
2020-01-14 23:19:13 -06:00
thinkyhead
8e1a21cf53
[cron] Bump distribution date (2020-01-15)
2020-01-15 00:08:21 +00:00
InsanityAutomation
ffd8b595d1
Fix PLR cancel with ExtUI ( #16556 )
2020-01-13 20:52:24 -06:00
Scott Lahteine
1457e40208
Make lcd_power_loss_recovery_cancel exportable
2020-01-13 20:25:12 -06:00
Bob Kuhn
1ad53cee1f
Improved STMicro L64XX stepper driver support ( #16452 )
2020-01-13 18:47:30 -06:00
thinkyhead
53f1e5ff5b
[cron] Bump distribution date (2020-01-14)
2020-01-14 00:08:54 +00:00
Scott Lahteine
0e6ef65aec
Clean up whitespace
2020-01-13 16:56:56 -06:00
Scott Lahteine
ee17051933
Version 2.0.1
2020-01-13 16:49:49 -06:00
Bob Kuhn
c4ffe74d71
Add SERVO, TONE timers to variant for better STEVAL_3DP001V1 support ( #16538 )
2020-01-13 00:26:17 -06:00
David Klasinc
55b2af9464
Fix Linux upload path detection ( #16514 )
2020-01-13 00:23:55 -06:00
thinkyhead
fc4a42bbdc
[cron] Bump distribution date (2020-01-13)
2020-01-13 00:08:17 +00:00
thinkyhead
57499291d3
[cron] Bump distribution date (2020-01-12)
2020-01-12 00:10:02 +00:00
Ryan V1
56e51efeea
Use RECIPROCAL macro (not _RECIP) ( #16530 )
2020-01-11 17:16:16 -06:00
Jason Smith
d22eb261cf
Fix probeless delta build ( #16537 )
2020-01-11 17:14:33 -06:00
FlyingSamson
fbf2f36cae
Only constrain motion on homed axes ( #16533 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-01-11 17:06:52 -06:00
thinkyhead
e8941d2bd8
[cron] Bump distribution date (2020-01-11)
2020-01-11 00:08:42 +00:00
Luc
d854c8fa5f
ESP3d integration for ESP32 ( #16515 )
2020-01-10 17:22:41 -06:00
Giuliano Zaro
e9a97127f7
Update Italian language ( #16527 )
2020-01-10 16:19:52 -06:00
Giuliano Zaro
0391e5bcc7
Prevent Z misaligment on tool change ( #16518 )
2020-01-10 16:12:21 -06:00
thinkyhead
d02a867424
[cron] Bump distribution date (2020-01-10)
2020-01-10 20:47:56 +00:00
Acenotass
2d820e6204
Update Russian language ( #16522 )
2020-01-10 13:06:02 -06:00
Tanguy Pruvot
f9f7697b96
Fix Probe Offset XY edit items (et Français) ( #16523 )
2020-01-10 13:04:59 -06:00
InsanityAutomation
409d7378d9
Add Probe Offsets menu ( #16444 )
2020-01-10 00:47:38 -06:00
ellensp
669fe74096
Fix compile error w/out LCD ( #16502 )
2020-01-09 04:51:41 -06:00
Jamie
36d08f8ad3
Add ARC_SEGMENTS_PER_SEC for finer G2/G3 arcs ( #16510 )
2020-01-09 04:48:00 -06:00
Scott Lahteine
6e658a7c04
Code style and comment tweaks
2020-01-08 20:00:26 -06:00
Scott Lahteine
95046c9047
Extend SERIAL_CHAR to take multiple arguments
2020-01-08 18:36:47 -06:00
thisiskeithb
5beca89412
Add menu item Tune > Advance K ( #16488 )
2020-01-08 17:43:36 -06:00
Alejandro Aguilera
5a5e1d0401
Fix Change Filament menu item with runout ( #16485 )
2020-01-08 16:03:23 -06:00
dagorel
a88b91b3ed
Provide some missing Arduino macros ( #16497 )
2020-01-07 21:56:47 -06:00
Lino Barreca
5c4c052fd7
Fix SKR Pro BLTouch conflicting timers ( #16499 )
2020-01-07 21:54:26 -06:00
Vertabreaker
d26c32375e
Fix EEPROM array size bug ( #16475 )
2020-01-07 21:49:27 -06:00
ellensp
994c695862
Fix MKS_SGEN sanity check ( #16501 )
2020-01-07 21:47:45 -06:00
ManuelMcLure
675295692b
Fix unused var warning ( #16467 )
2020-01-05 02:52:38 -06:00
Tanguy Pruvot
d1e55a2d1d
Remove extra UBL map edit menu item ( #16451 )
2020-01-05 02:25:03 -06:00
Vertabreaker
5e1f0e5e90
Followup to EEPROM patch ( #16470 )
2020-01-05 02:19:50 -06:00
Tanguy Pruvot
bdcccee203
Improve French language (UBL) ( #16453 )
2020-01-05 02:09:27 -06:00
Justin
d70dad6807
Fix permyriad progress bar ( #16460 )
2020-01-05 02:08:24 -06:00
Acenotass
93e35880ce
Update Russian language ( #16461 )
2020-01-05 02:04:28 -06:00
Jamie
9b970cf12f
Add option to invert joystick axes ( #16466 )
2020-01-05 02:01:05 -06:00
Jamie
022b6b9067
Fix M115 cap with EXTRUDERS == 0 ( #16459 )
2020-01-05 01:54:30 -06:00
Jamie
fc07b0ea30
Fix EEPROM error with EXTRUDERS == 0 ( #16464 )
2020-01-05 01:54:30 -06:00
George Fu
e593da1c23
Update and fix DGUS ( #16317 )
2020-01-03 21:00:44 -06:00
greppp
7f87a044cd
Fix Ender-2 display pins, add BTN_ENC ( #16349 )
2020-01-03 20:44:16 -06:00
Vertabreaker
b841b9bd01
Add example configs. Expand custom menu. ( #16286 )
...
- Anet E10
- Geeetech D200
- Geeetech M201
- JGAurora Magic
- MakerFarm Pegasus 12
2020-01-03 20:37:22 -06:00
George Fu
ceeba58dc9
FYSETC F6 v1.4 board support ( #16321 )
2020-01-03 20:29:25 -06:00
Scott Lahteine
aa4db785f2
MSG_WATCH => MSG_INFO_SCREEN
2020-01-03 19:50:55 -06:00
Jason Smith
3cade6245e
Fix MIN_PROBE_EDGE bug in default ABL G29 ( #16367 )
2020-01-03 17:46:26 -06:00
ellensp
d7aee3b7b6
Pins debugging AVR serial pins ( #16437 )
2020-01-03 17:40:56 -06:00
thisiskeithb
64fdc4f24b
BTT002: Add runout, PLR, and RGB pins ( #16442 )
2020-01-03 17:38:15 -06:00
Scott Lahteine
1d0452c41e
Standardize drivers.h values, add class indirection ( #16448 )
2020-01-03 17:11:36 -06:00
Jason Smith
595e684658
Add Leapfrog Xeed 2015 support ( #16400 )
2020-01-02 22:04:13 -06:00
Tanguy Pruvot
cda363a15e
Touch UI: Fix UBL mesh value editing ( #16432 )
2020-01-02 21:26:03 -06:00
ellensp
7a50dbc00d
Add motherboard BIGTREE_SKR_V1.4_TURBO ( #16374 )
2020-01-02 21:15:34 -06:00
InsanityAutomation
d129ac1b37
Z-offset edit precision based on value limits ( #16425 )
2020-01-02 20:40:40 -06:00
Tanguy Pruvot
1ea529b9c1
STM32F1: Fix misleading indent / nullptr on FSMC ( #16431 )
2020-01-02 20:19:07 -06:00
Acenotass
5ffabd56eb
Update Russian language ( #16426 )
2020-01-02 20:17:08 -06:00
Dirk O. Kaar
d0e1166cce
Fix Visual Micro "Arduino IDE for Visual Studio" support ( #16418 )
2020-01-02 19:01:38 -06:00
Scott Lahteine
5b75a018b7
Misc patches preceding DGUS PR
2020-01-02 17:59:38 -06:00
randellhodges
c75b560604
PWM pin not needed for Neopixel brightness / submenu ( #16345 )
2020-01-02 17:50:19 -06:00
Scott Lahteine
a2cda631d9
Clean up trailing whitespace
2020-01-02 16:33:50 -06:00
Jason Smith
9ff2d34bf8
Fix warnings in stepper.cpp ( #16364 )
2020-01-01 22:06:50 -06:00
Jason Smith
92ad973729
Fix some DOGM warnings ( #16363 )
2020-01-01 21:58:16 -06:00
rado79
0be8b22d3c
Add FILAMENT_UNLOAD_PURGE_FEEDRATE ( #16372 )
2020-01-01 21:56:58 -06:00
Jason Smith
4e1f2f89f6
Refactor TMC-related macros and sanity checks ( #16384 )
2020-01-01 21:51:15 -06:00
Lino Barreca
ac32ed74b4
Return from loop() on non-AVR boards ( #16390 )
2020-01-01 21:13:43 -06:00
Alexander Gavrilenko
c6f7ea9f22
MKS Robin ILI9328 TFT support ( #16401 )
2020-01-01 20:55:37 -06:00
Bob Kuhn
747b2b9bf4
Improve STEVAL_3DP001V1 and future STEVAL_* support ( #16404 )
2020-01-01 20:52:56 -06:00
Pascal de Bruijn
23bdc1556d
Permit ENDSTOP_INTERRUPTS_FEATURE on more STM32 ( #16412 )
2020-01-01 20:41:35 -06:00
Giuliano Zaro
47edbd9220
Fix min limit for acc, feed, jerk ( #16416 )
2020-01-01 20:38:33 -06:00
Scott Lahteine
832321f55d
Fix games menu back item, titles
2019-12-31 16:06:16 -06:00
Scott Lahteine
941a09b6ac
Fix Max7219 with 256 or more cels
2019-12-31 16:04:29 -06:00
Scott Lahteine
0673f335e1
Merge remote-tracking branch 'upstream/bugfix-2.0.x' into 2.0.x
2019-12-24 00:05:04 -06:00
InsanityAutomation
1c9ccce520
Add NOZZLE_AS_PROBE (no probe offsets) ( #15929 )
2019-12-24 00:03:08 -06:00
petrzjunior
254d352fca
Update Czech language ( #16305 )
2019-12-23 18:14:51 -06:00
Luu Lac
baa101253a
MKS Robin 2 (STM32F407ZE) base support ( #16270 )
2019-12-22 18:16:08 -06:00
Scott Lahteine
ac7ee4b94a
Release version 2.0.0
2019-12-22 18:03:36 -06:00
ferengi82
2230ef6e09
MKS SGen-L pins EEBF or EFBF scheme ( #16296 )
2019-12-22 17:11:49 -06:00
Luc
24eaf2d7e0
Some ESP32 patches ( #16297 )
2019-12-22 16:11:17 -06:00
randellhodges
f4196d394b
Flash leveling (for some STM32) ( #16174 )
2019-12-22 16:04:09 -06:00
randellhodges
ebdf8b6b1a
Fix STM32 flush of TX (used by UBL) ( #16197 )
2019-12-22 03:08:17 -06:00
FLYmaker
59f9bb2120
Add FLYBOARD (STM32F407ZG) ( #16257 )
2019-12-22 03:05:30 -06:00
Luc
a3d88aebed
Add MRR_ESPA/_ESPE (ESP32) boards ( #16238 )
2019-12-21 18:58:00 -06:00
Jason Smith
d5bc5547ee
Step timing cleanup and rounding fix ( #16258 )
2019-12-21 18:36:25 -06:00
Tanguy Pruvot
f8065da48f
Reset runout.ran_out on resume ( #16230 )
2019-12-21 18:35:35 -06:00
Jason Smith
0d8c81b2a6
Fix axis CS sanity check ( #16271 )
2019-12-20 22:05:42 -06:00
Markus Towara
856013cc0f
Fix planner compile error ( #16272 )
2019-12-20 22:04:49 -06:00
randellhodges
0b6c2d893e
Fix G34 with Z_DUAL_STEPPER_DRIVERS compile ( #16274 )
2019-12-20 22:03:37 -06:00
Jason Smith
2e235aff03
Fix HAL_STM32 + Arduino IDE SoftwareSerial conflict ( #16266 )
2019-12-20 19:14:27 -06:00
Scott Lahteine
87992f3669
Use Github Actions for CI, date bump ( #16269 )
2019-12-20 19:11:53 -06:00
Scott Lahteine
64ebec50dc
Move pins debug condition
2019-12-20 10:19:41 -06:00
Jeff Eberl
70325a6a0f
Update test scripts to error on unknown ( #16229 )
2019-12-19 21:03:42 -06:00
Scott Lahteine
d81de7f521
Tweak sanity checks
2019-12-19 21:02:14 -06:00
Scott Lahteine
deff538909
Fix broken M100_dump_routine
2019-12-19 21:02:14 -06:00
Scott Lahteine
10f7bbee32
Use MYSERIAL0 (not SerialUSB) for Malyan LCD
2019-12-19 19:53:06 -06:00
Scott Lahteine
b49a0e39d5
HOME_USING_SPREADCYCLE is obsolete
...
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
2019-12-19 16:02:57 -06:00
Scott Lahteine
937dca4432
Followup to TMC2209 spreadcycle patch
2019-12-19 15:54:44 -06:00
BigTreeTech
bbe0ffb2fa
BigTreeTech SKR v1.4 support ( #16236 )
2019-12-19 02:41:35 -06:00
Jason Smith
1bad8f1b17
Improve pulse timing and step reliability ( #16128 )
2019-12-19 02:38:48 -06:00
Mario Costa
5f06f42ccd
Spindle/Laser pins for RADDS ( #16119 )
2019-12-19 02:37:07 -06:00
elementfoundry
e5edbf9d35
Allow TMC2209 to save/restore spreadCycle ( #16153 )
...
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
2019-12-19 02:23:54 -06:00
Scott Lahteine
865071a946
Tweak code formatting
2019-12-19 02:16:17 -06:00
Moshi Binyamini
dcdaa2025f
Sanity-check Z_STEPPER_AUTO_ALIGN coordinates ( #16231 )
2019-12-19 00:59:01 -06:00
Scott Lahteine
0400783444
Tweak G34, fix a declaration
2019-12-19 00:42:39 -06:00
Scott Lahteine
768a1d2713
[cron] Bump distribution date
2019-12-19 00:39:55 -06:00
Scott Lahteine
262ff9584c
[cron] Bump distribution date
2019-12-16 00:00:04 -06:00
Vertabreaker
e0c71344ed
Define more FAN pins for GT2560 ( #16235 )
2019-12-15 20:28:55 -06:00
chzj333
42a336f8bc
Update BTT002 platform (fixing SD init) ( #16217 )
2019-12-15 12:24:54 -06:00
Tanguy Pruvot
a0badf572e
STM32 Touch UI timings, Longer onboard pullups ( #16219 )
2019-12-15 12:03:39 -06:00
thisiskeithb
a358b72ec8
Add SKR Mini E3 + Zonestar LCD warning ( #16214 )
2019-12-15 12:02:20 -06:00
danym21
6e8dcba698
Fix G28 debug line, M569 calls ( #16213 )
2019-12-15 12:00:00 -06:00
Luc
9d6b2ebf50
Improve ESP32 HAL (EEPROM, watchdog) ( #16228 )
2019-12-15 11:39:39 -06:00
thisiskeithb
dc8d8cb39c
Fix MKS SGen-L SD detect pin ( #16224 )
2019-12-15 11:25:07 -06:00
Luu Lac
509e1ab053
TOUCH_MI_DEPLOY_XPOS fallback to X_MIN_POS ( #16226 )
2019-12-15 11:21:39 -06:00
Luu Lac
e9dadacf7b
Fix bad #ifdef ( #16227 )
2019-12-15 11:16:36 -06:00
Scott Lahteine
6a514a1e8e
Move status screen defines
2019-12-12 22:20:03 -06:00
Scott Lahteine
303ddb862a
Tweak some config names
2019-12-12 22:18:04 -06:00
Scott Lahteine
f3d64b7115
Cardreader read/write open methods
2019-12-12 18:46:49 -06:00
Bo Herrmannsen
98382fcea5
Include Z in SCARA steps feedrate ( #16193 )
2019-12-12 17:13:49 -06:00
iain MacDonnell
629c039eed
Update M503 MBL G29 report ( #16199 )
2019-12-12 16:54:54 -06:00
randellhodges
2a7f1091ce
Fix compile error (macro substitution typo) ( #16194 )
2019-12-12 16:51:35 -06:00
Anders Sahlman
3d4aa015a8
Add MKS Robin Mini EEPROM defines ( #16203 )
2019-12-12 16:35:46 -06:00
InsanityAutomation
7b512742f4
Tweak ExtUI Probeless Babystepping ( #16177 )
2019-12-12 15:51:56 -06:00
ManuelMcLure
b065a60dd0
Onboard (always-on) pullups support ( #16144 )
2019-12-12 15:49:14 -06:00
thisiskeithb
98814e1c47
MKS 12864 OLED pins for SGEN-L ( #16188 )
2019-12-11 02:18:21 -06:00
André Kjellstrup
c2342c3528
Use error message !! hints ( #16145 )
2019-12-11 01:46:11 -06:00
MangaValk
96cf556139
Fix multiple servos with STM32 ( #16151 )
2019-12-11 01:44:05 -06:00
MS1987
31fdaea269
Add MKS Robin Pro, MKS Robin Lite3 ( #16163 )
2019-12-11 00:23:47 -06:00
Scott Lahteine
1c48817a47
[cron] Bump distribution date
2019-12-11 00:00:04 -06:00
Scott Lahteine
0d52eaa875
Superscript 3 for mm3
2019-12-10 23:45:39 -06:00
Tanguy Pruvot
5ebef425ce
Update french (objects, retract...)
2019-12-10 23:45:39 -06:00
Giuliano Zaro
5dfa152ba2
Update Italian language ( #16147 )
2019-12-10 23:38:14 -06:00
dagorel
1c4f672eae
Formalize DAC percent strings ( #16176 )
2019-12-10 23:37:25 -06:00
Anders Sahlman
1bcd47e65f
Correct MKS Robin Mini pins ( #16178 )
2019-12-10 23:32:11 -06:00
Antti Andreimann
1465fc0632
Fix controller and SD on Robin Nano ( #16187 )
2019-12-10 23:29:33 -06:00
Scott Lahteine
07a61057ba
[cron] Bump distribution date
2019-12-10 00:11:19 -06:00
Scott Lahteine
bb5717c5b3
[cron] Bump distribution date
2019-12-07 00:00:05 -06:00
Tanguy Pruvot
ab61c09bff
Improve touch buttons behavior ( #16109 )
2019-12-06 00:47:50 -06:00
Antti Andreimann
b65ab21733
Fix compile error with disabled PIDTEMP ( #16108 )
2019-12-05 20:51:41 -06:00
randellhodges
7f8ca85e69
STM32F1 Flash-based EEPROM fixes ( #16118 )
2019-12-05 20:48:11 -06:00
Scott Lahteine
f64649933f
[cron] Bump distribution date
2019-12-04 01:57:33 -06:00
ManuelMcLure
68da497f35
Remove debug_out.h '#pragma once' (again) ( #16098 )
2019-12-04 01:29:02 -06:00
Vertabreaker
0832a60db3
EXP3D Imprimante Multifonction ( #16079 )
2019-12-03 06:52:38 -06:00
ellensp
cb4cd76086
Fix TMC_SW_MOSI for BTT_SKR_MINI_V1.1 ( #16081 )
2019-12-03 06:44:36 -06:00
Scott Lahteine
6134bff81b
Expand environments in platformio.ini
2019-12-02 21:19:23 -06:00
Scott Lahteine
b2c670fd94
[cron] Bump distribution date
2019-12-02 00:00:04 -06:00
Scott Lahteine
cb7817093f
More serial macro cleanup
2019-12-01 22:23:36 -06:00
Scott Lahteine
9114a14eca
Fix commas in EEPROM code
2019-12-01 21:59:58 -06:00
Vertabreaker
3874f4a097
Geeetech A30 / GTM32 support ( #16071 )
2019-12-01 21:25:45 -06:00
Luu Lac
01e4b0c067
Add Laser / Spindle bitmap for LCD ( #16068 )
2019-12-01 21:20:15 -06:00
Scott Lahteine
3dc49fd1c6
Split up hotend / bed drawing
2019-12-01 20:52:59 -06:00
InsanityAutomation
7126a5e5a7
Add Host Prompt Notification Method ( #15942 )
2019-12-01 17:39:28 -06:00
ManuelMcLure
c061656659
Use PSU powerup delay for all powerups ( #16065 )
2019-12-01 17:36:49 -06:00
Scott Lahteine
25a7ceabdb
Fix missing step_current_down semicolons
2019-12-01 17:30:22 -06:00
Scott Lahteine
9b6d2da9bf
Fix debug out macros
2019-12-01 17:28:18 -06:00
Scott Lahteine
4718b8ad02
Add _P variants to debug_out
2019-12-01 13:32:32 -06:00
Felicia Hummel
6c2438deae
Fix PSU_POWERUP_DELAY compile error ( #16064 )
2019-12-01 12:55:28 -06:00
brian park
b258cc85bf
Mostly Printed SCARA (MPSCARA) support ( #15573 )
2019-11-30 08:57:34 -06:00
hammerhead2k2
19f840a9b5
BTT SKR 1.3 pins for Anet Full Graphics LCD ( #16047 )
2019-11-30 08:21:54 -06:00
Scott Lahteine
83a4e8559c
Followup to "optimize common strings"
2019-11-30 08:18:23 -06:00
InsanityAutomation
b24b0f385f
Add ExtUI Flow Rate method ( #16048 )
2019-11-30 07:23:53 -06:00
Felicia Hummel
690ed531b6
Configurable PSU power-on delay ( #16050 )
2019-11-30 07:17:24 -06:00
Scott Lahteine
27943f9e31
Multiple axis TMC OTPW step down ( #16044 )
2019-11-30 06:59:44 -06:00
Scott Lahteine
1ee648ecd2
Followup to "optimize common strings"
2019-11-30 06:55:32 -06:00
Scott Lahteine
0138c0b55b
[cron] Bump distribution date
2019-11-30 00:00:04 -06:00
Scott Lahteine
f83bc0aa13
Optimize common strings
...
Saves 128 bytes in testing with `mftest mega 1 -y`
2019-11-29 22:54:42 -06:00
Scott Lahteine
2d74c2042a
Clean up whitespace, GTM32 pins
2019-11-29 20:05:32 -06:00
Chris Pepper
e585c37d7d
Fix #16038
2019-11-29 16:44:11 +00:00
Vertabreaker
1803f672f8
Pins for GTM32 board variants ( #16020 )
2019-11-29 07:12:49 -06:00
BigTreeTech
441ee3e53f
Add 'M114 E' to get E position (M114_DETAIL) ( #16026 )
2019-11-29 06:53:32 -06:00
Chris Pepper
a63491e6eb
Sanity check ADC pins and FAST_PWM_FAN with Servos ( #16038 )
2019-11-29 06:52:28 -06:00
Bob
0f2ee414db
Update thermistornames.h ( #16027 )
2019-11-29 02:06:11 -06:00
Scott Lahteine
0f14e0e978
[cron] Bump distribution date
2019-11-29 00:00:06 -06:00
Bob
5a98c83eef
Use MAX6675 SPI pins for MAX31865 over SPI pins ( #16024 )
2019-11-27 01:45:03 -06:00
Jason Smith
752a1e76ab
Float ABL mesh boundaries, no probe position rounding ( #16018 )
2019-11-27 01:29:25 -06:00
Jason Smith
ce9a4afe95
Better ST7920 timings for FYSETC S6 ( #16022 )
2019-11-27 01:26:21 -06:00
Scott Lahteine
289c5dcccb
Fix boot screen sanity check
2019-11-27 01:10:23 -06:00
Scott Lahteine
98f83dc756
Add comments to G29
2019-11-27 01:05:22 -06:00
Dirk O. Kaar
0550f30790
Renkforce configuration updates ( #16017 )
2019-11-26 20:22:17 -06:00
Scott Lahteine
077eeaa0f4
Fix mixing extruder feedrate ( #15905 )
2019-11-26 18:03:59 -06:00
Vertabreaker
12417d087b
E2 pins for GT 2560 v3 ( #16016 )
2019-11-26 17:43:27 -06:00
timeburn
a5a143f944
Include host_actions.h in G34 ( #16014 )
2019-11-26 16:38:41 -06:00
George Fu
cf1e19d167
Fysetc S6 support ( #15850 )
2019-11-26 16:15:03 -06:00
Dirk O. Kaar
1cea1687f3
Renkforce RF100 (V1), V2, XL, and XL Plus ( #15695 )
2019-11-26 14:06:23 -06:00
thisiskeithb
f786cc5145
Revert default BTT STM32F103 environment ( #16006 )
2019-11-26 04:28:13 -06:00
madmattco
049e8d5963
Add VAKE / VAKE403D support ( #15631 )
2019-11-26 04:00:59 -06:00
Heilig Benedek
993802c404
Fix Ender 2 display SCK, BTN_ENC pins ( #15997 )
2019-11-26 03:48:21 -06:00
haschtl
ff6518c0a8
Add PID_FAN_SCALING option ( #15585 )
2019-11-26 03:34:43 -06:00
lukasmatena
8ccfdaca02
Add M220 B/R with PRUSA_MMU2 ( #15739 )
2019-11-26 03:34:18 -06:00
Chris Pepper
c1aac3a0c9
Fix delta_mm.e with zero extruders ( #15996 )
2019-11-26 02:58:17 -06:00
Marcio T
43d0391d82
Fix Touch UI message strings ( #16004 )
2019-11-26 02:56:25 -06:00
Robby Candra
fc9f8d27eb
Fix Progress / Remaining display on DOGM ( #16005 )
2019-11-26 02:55:22 -06:00
Jason Smith
d0282e5ba8
Allow slop in position_is_reachable for delta ( #16003 )
2019-11-26 02:53:28 -06:00
Scott Lahteine
1d150e41b6
Reduce MMU2 code, add test
2019-11-26 02:15:31 -06:00
Robby Candra
55595d444d
Use LCD_WIDTH for indexed string ( #15979 )
2019-11-24 19:06:23 -06:00
InsanityAutomation
2142beb2e5
Fix UI compile error in UBL ( #15981 )
2019-11-24 17:04:19 -06:00
Jason Smith
c497a491f4
Fix a PID_EXTRUSION_SCALING menu item ( #15988 )
2019-11-24 17:01:14 -06:00
Scott Lahteine
b11551c767
Touch UI updates for Cocoa Press ( #15986 )
2019-11-24 06:08:05 -06:00
Scott Lahteine
441e822fb3
LULZBOT_TOUCH_UI => TOUCH_UI_FTDI_EVE
2019-11-23 17:04:17 -06:00
Scott Lahteine
47c19aa2b3
Clean up probe accessors
2019-11-23 17:02:04 -06:00
pfillion42
4a5dee6356
(SKR 1.3) Assign DIAG pins for homing dir ( #15972 )
2019-11-23 16:20:13 -06:00
Denis Semenov
0fcd1f4a49
Fix HAS_CLASSIC_E_JERK and related issues ( #15968 )
2019-11-23 15:56:07 -06:00
Scott Lahteine
8f09d2e790
Add STM32F103RE_bigtree to Auto Build
2019-11-22 16:47:31 -06:00
Gustavo Alvarez
b2a275891c
Support RET6 in BTT SKR Mini ( #15957 )
2019-11-21 05:09:01 -06:00
Jason Smith
b904ba0f29
Improve Delta probing / calibration ( #15887 )
2019-11-21 03:26:00 -06:00
Jason Smith
4ede13e36a
Fix G29 for updated meshCount type ( #15960 )
2019-11-21 03:19:56 -06:00
Bob
751cd1f533
MAX31865 temperature sensor ( #15930 )
2019-11-21 03:15:10 -06:00
Roman Moravčík
5681017d0c
Update Slovak language ( #15953 )
2019-11-20 17:41:14 -06:00
BigTreeTech
ab8b24fdba
Power Loss Recovery with a UPS ( #15943 )
2019-11-20 17:40:21 -06:00
Scott Lahteine
ab9f0f2c4f
Followup to meshCount patch
2019-11-20 04:57:04 -06:00
InsanityAutomation
e81b946f06
Better singlenozzle stored fan speed menus ( #15921 )
2019-11-20 00:14:56 -06:00
Daniel Negut
a3229b30ec
Add Zonestar/Anet LCD for SKR mini E3 ( #15931 )
2019-11-20 00:06:26 -06:00
InsanityAutomation
798f34abcd
Float XY probe offset followup (probe edge) ( #15928 )
2019-11-19 23:29:52 -06:00
Giuliano Zaro
31e329f143
Update Italian language ( #15925 )
2019-11-19 23:27:53 -06:00
Jason Smith
9906e96ffb
Allow UBL G29 J1 with PAUSE_BEFORE_DEPLOY_STOW ( #15934 )
2019-11-19 23:26:38 -06:00
Evgeny-SPB
7116a8645c
G34 logic / typo fix ( #15938 )
2019-11-19 23:25:07 -06:00
Giuliano Zaro
aa89bb71f9
Fix MMU2 compile error ( #15923 )
2019-11-19 23:22:02 -06:00
TheAssassin
814d908a8a
Ender-2 LCD on BTT SKR E3 ( #15924 )
2019-11-19 23:21:27 -06:00
InsanityAutomation
4d4e692c81
Match onMeshUpdate() index sign ( #15920 )
2019-11-19 23:16:43 -06:00
Luu Lac
4d9a5fef3b
Update Vietnamese language ( #15940 )
2019-11-19 21:08:47 -06:00
Scott Lahteine
865055e07a
[cron] Bump distribution date
2019-11-18 00:00:08 -06:00
Scott Lahteine
2bd6dc02d6
[cron] Bump distribution date
2019-11-17 00:00:06 -06:00
Robby Candra
40bbe58371
Use lcd_uint_t in lcd_put_u8str_ind_P ( #15909 )
2019-11-16 16:37:21 -06:00
Roxy-3D
f19fa64e98
Eliminate multiple settings to extruder_duplication_enabled in G28
...
If the IDEX mode was previously set (via GCode or the LCD Panel) to a duplication mode... It was lost after a G28 due to this redundant setting of 'extruder_duplication_enabled'.
It is very important to the various use cases of IDEX machines that extruder_duplication_enabled is preserved across a G28. The reason is this allows a person to use the LCD Panel to put the machine into a duplication mode, and then send a 'normal' part file to the printer and get two parts out of the process.
2019-11-15 15:42:01 -06:00
thisiskeithb
0f57818f2d
Support 512K "RCT6" in BTT SKR Mini ( #15890 )
2019-11-15 02:51:26 -06:00
Scott Lahteine
27cb4db80e
Reduced string storage using tokens ( #15593 )
2019-11-14 20:30:30 -06:00
Lino Barreca
bd321d4b7c
Don't compile STM32 SoftwareSerial unless STM32 ( #15894 )
2019-11-14 05:21:23 -06:00
Scott Lahteine
ac2d7ab14c
Fix timers.h include
2019-11-14 04:47:53 -06:00
Scott Lahteine
a022defe06
[cron] Bump distribution date
2019-11-14 00:00:12 -06:00
Scott Lahteine
3f4636e916
"nozzle_to_probe_offset" is obsolete
2019-11-13 03:07:54 -06:00
Scott Lahteine
602ca5dea6
No USE_M73_REMAINING_TIME without LCD_SET_PROGRESS_MANUALLY
2019-11-13 02:07:17 -06:00
Robby Candra
fcfde7c2f5
Only assign CS/RX/TX on extra axes with SPI/UART ( #15886 )
2019-11-13 02:03:34 -06:00
Scott Lahteine
a4709ba765
Store unscaled PID values in EEPROM ( #15884 )
2019-11-13 01:47:46 -06:00
Jason Smith
9fd35c84ce
SoftwareSerialM for SKR STM32F1 boards ( #15875 )
2019-11-12 22:16:54 -06:00
Jamie
32028902c3
Use max feedrate for joystick motion ( #15870 )
2019-11-12 21:01:04 -06:00
Giuliano Zaro
bb93ea1be4
[SAMD51] Activate ADCs oversampled 12bits ( #15874 )
2019-11-12 20:59:17 -06:00
Roman Moravčík
e110f5abce
M73 R : Set Remaining Time ( #15549 )
2019-11-12 19:36:54 -06:00
Lino Barreca
ac71cdc265
New HardwareTimer for STM32 5.7.0 ( #15655 )
2019-11-12 19:23:02 -06:00
Chris Pepper
4762dfe797
Fix lpc u8g i2c ( #15876 )
2019-11-12 01:59:36 +00:00
Chris Pepper
af61f37b65
Update lpc176x requirements ( #15869 )
2019-11-11 03:25:56 +00:00
ManuelMcLure
b9703fdf36
Ensure TMC + LIN_ADVANCE pulse length ( #15807 )
2019-11-10 19:04:28 -06:00
Scott Lahteine
5e5045c4ee
Touch UI finishing touches
2019-11-10 18:52:53 -06:00
Marcio Teixeira
5639b8ca20
Touch UI fixes for Cocoa Press ( #15847 )
2019-11-10 18:49:41 -06:00
danym21
28e1614c2e
Add Sensorless Homing current ( #15690 )
2019-11-10 18:45:06 -06:00
Chris Pepper
86d0bc1af5
Update lpc176x framework version requirement ( #15868 )
2019-11-10 23:30:28 +00:00
LinFor
48b7a1e66e
Allow non-zero "fan off" PWM value ( #15709 )
2019-11-10 16:33:56 -06:00
Jason Smith
770adcfa15
Raise Z before homing X/Y on unknown Z ( #15859 )
2019-11-10 16:21:20 -06:00
Scott Lahteine
624336f453
Fix up Megatronics 3.2 test
2019-11-10 16:19:57 -06:00
ellensp
7b29c60c46
Fix compile with chamber enabled ( #15862 )
2019-11-10 16:15:08 -06:00
Scott Lahteine
534f2d69c1
[cron] Bump distribution date
2019-11-10 00:00:04 -06:00
Jademalo
37874a6472
Fix E0_SERIAL_RX_PIN typo ( #15841 )
2019-11-09 22:51:20 -06:00
Marcelo Cerri
b9d351899a
Update SKR mini E3 1.2 Filament Runout pin ( #15843 )
2019-11-09 22:49:33 -06:00
Scott Lahteine
7010f92c4b
Board-based LCD delays
2019-11-09 22:33:38 -06:00
Scott Lahteine
9ca25118d0
Whitespace cleanup
2019-11-09 21:17:52 -06:00
Jason Smith
b3f81eead5
Fix/improve TURBO_BACK_MENU_ITEM ( #15856 )
2019-11-09 19:27:30 -06:00
Scott Lahteine
776632c503
Add and apply REPEAT macro ( #15829 )
2019-11-09 17:59:04 -06:00
Scott Lahteine
8061836e74
Fix Lulzbot tag 30: "Heaters Off"
2019-11-08 03:57:34 -06:00
Scott Lahteine
249f600ceb
[cron] Bump distribution date
2019-11-08 00:00:03 -06:00
Marvin Sinister
8d157a4520
Fix MKS MINI12864 on SKR 1.3 ( #15836 )
2019-11-07 19:39:08 -06:00
Luu Lac
ed6bbe012b
Fix incomplete 'Homing XYZ' screen draw ( #15830 )
2019-11-07 19:14:02 -06:00
AnHardt
4db68d704f
Update Display Throttling ( #15837 )
2019-11-07 19:04:19 -06:00
Scott Lahteine
bb5b1e19b0
Function-style stepper macros
2019-11-07 17:14:36 -06:00
Scott Lahteine
0be9fdb455
Move single-use to lambdas
2019-11-07 00:28:33 -06:00
Scott Lahteine
84ce3a6bea
LCD corner screen handler lambda
2019-11-07 00:24:16 -06:00
Scott Lahteine
711703dcd1
[cron] Bump distribution date
2019-11-07 00:00:06 -06:00
LinFor
a84e3d1b80
Use native ADC resolution where possible ( #15719 )
2019-11-06 17:49:17 -06:00
Miroslav Šustek
9201197878
Fix SKR E3 board BLTOUCH + SPEAKER timer conflict ( #15781 )
2019-11-06 17:34:29 -06:00
Jason Smith
814a2eaf8f
Allow TMC baud rate override ( #15773 )
2019-11-06 17:08:12 -06:00
teemuatlut
d9b0b964be
Fix TMC2208 HW Serial constructor ( #15782 )
2019-11-06 16:57:48 -06:00
Axel
786617e375
Fix RAMPS + VIKI i2c ( #15811 )
2019-11-06 16:52:28 -06:00
Scott Lahteine
e6dfc991ae
Patch tabs, heater led tests
2019-11-06 16:28:36 -06:00
Scott Lahteine
a89f4703df
Tweak permissions
2019-11-06 16:10:14 -06:00
Roman Moravčík
41b5d720e2
Fix filament Change heading on LCD ( #15783 )
2019-11-06 15:58:06 -06:00
Luu Lac
4ee3502c8f
Fix "confused intellisense" ( #15817 )
2019-11-06 15:54:09 -06:00
Scott Lahteine
f5b5b9e8ec
Bring filament menu up to speed
2019-11-05 17:16:12 -06:00
ellensp
f088c6a850
Add MKS_GEN_L_V2 controller support ( #15793 )
2019-11-04 16:31:27 -06:00
aleknest
cf87d3c700
More compatible uint8_t for Experimental i2c Bus buffer ( #15788 )
2019-11-04 16:28:16 -06:00
Scott Lahteine
e9805a0bcb
Go to previous menu on object cancel
2019-11-04 16:13:10 -06:00
Scott Lahteine
51fd226a4d
Unconfuse intellisense
2019-11-04 15:40:56 -06:00
Scott Lahteine
d80ef43c19
Followup to es int patch
2019-11-04 15:40:45 -06:00
Giuliano Zaro
35cd545106
Use prior endstop pin-to-interrupt macros ( #15771 )
2019-11-04 15:24:41 -06:00
Scott Lahteine
328ddda654
Clean up whitespace
2019-11-04 13:23:26 -06:00
Scott Lahteine
55991962be
Patch extra axis MS pins for debugging
2019-11-04 12:28:10 -06:00
Chris Pepper
b9116d4050
LPC176x Framework update ( #15722 )
...
Changes required for compatibility with framework-arduino-lpc176x 0.2.0
2019-11-03 02:34:09 +00:00
Scott Lahteine
15f94e5ee5
Add NUL_STR global
2019-11-02 07:31:07 -05:00
Scott Lahteine
ea3217cd46
Move 'draw' methods into Menu Item classes ( #15760 )
2019-11-02 07:28:20 -05:00
ManuelMcLure
76b861d759
Fix kill screen with null string ( #15747 )
2019-11-02 07:13:42 -05:00
Robby Candra
7360e9343a
Minor DOGM status screen fix ( #15746 )
2019-11-02 07:04:31 -05:00
Robby Candra
bdb452ed81
Fix missing % on DOGM Status Screen ( #15748 )
2019-11-02 07:01:50 -05:00
Giuliano Zaro
65ef774e8d
Fix mega Port J endstop interrupts ( #15758 )
2019-11-02 06:59:38 -05:00
Scott Lahteine
a920b10483
Fix true/false redefined warnings
2019-11-02 06:04:28 -05:00
Scott Lahteine
ed8f1ca9cf
Revert Cortex delay for now
2019-11-02 04:12:18 -05:00
Scott Lahteine
ca6d00b862
Save some string flash
2019-11-02 00:48:05 -05:00
Scott Lahteine
23d21dd81c
Tweak lambdas
2019-11-02 00:05:23 -05:00
Scott Lahteine
a7d7f36871
[cron] Bump distribution date
2019-11-02 00:00:05 -05:00
Scott Lahteine
93db4f4535
Tweak backtrace.cpp include
2019-11-01 22:08:33 -05:00
Scott Lahteine
f0d952d33a
Cortex M3-M7 can use DWT->CYCCNT ( #15762 )
...
Suggested by Alex Kenis at https://youtu.be/ZfyPcdhQnAA?t=502
2019-11-01 22:07:51 -05:00
Scott Lahteine
ad28da7eb4
Patch ABL G29 loop
...
Followup to e3ddf6e81a
2019-11-01 15:39:05 -05:00
Scott Lahteine
e7d9db284e
Followup to M240 patch
2019-10-31 17:27:19 -05:00
Raúl Lázaro Sánchez
7c60853219
Fix blocking delay in Photo G-code M240 ( #15728 )
2019-10-31 17:14:11 -05:00
The-Force
c6f694a247
Power Loss Recovery for volumetric extrusion ( #15734 )
2019-10-31 14:09:37 -05:00
Scott Lahteine
4e6e02bc3e
Include pause.h for M701-702
2019-10-31 13:18:50 -05:00
Scott Lahteine
e3ddf6e81a
Fix meshCount signed-ness
2019-10-31 13:18:50 -05:00
Scott Lahteine
899e0fcdbb
[cron] Bump distribution date
2019-10-31 00:00:07 -05:00
Scott Lahteine
35b1149d96
Patch es int tests for Arduino 1.8.10
2019-10-30 15:52:02 -05:00
Scott Lahteine
c80eda073f
M119 => report_states
2019-10-30 15:24:10 -05:00
LinFor
7d24f152d8
Fix a typo breaking the build ( #15726 )
2019-10-30 15:10:08 -05:00
Scott Lahteine
61225e685d
Abort SD followup
2019-10-29 17:04:49 -05:00
Scott Lahteine
d5c1c72a76
Tweak CW/CCW bitmaps
2019-10-29 16:53:07 -05:00
Scott Lahteine
aaf018e5a0
Language changes
2019-10-29 16:20:35 -05:00
Scott Lahteine
583fc4ee2a
Move abortSDPrinting with others
2019-10-29 16:00:28 -05:00
Scott Lahteine
c5713b5e98
Clean Endstops::event_handler
2019-10-29 15:58:26 -05:00
Scott Lahteine
be498d6280
[cron] Bump distribution date
2019-10-29 00:00:05 -05:00
Aurawin
b09b469dd5
Add BIQU TANGO V1 support ( #15682 )
2019-10-28 18:21:59 -05:00
studiodyne
319e2b5760
Fan menus fix. FR cosmetic change. ( #15714 )
2019-10-28 16:49:31 -05:00
studiodyne
f139642e0f
XY/Z Babystep Multiplicators ( #15691 )
2019-10-28 16:44:17 -05:00
Scott Lahteine
ade76e53de
Fix A10M/A20M mixer display
...
Co-Authored-By: 3Dangel <3dangel@users.noreply.github.com>
2019-10-28 16:26:54 -05:00
InsanityAutomation
cc4d3a215e
Fix ExtUI UBL method calls ( #15704 )
2019-10-28 15:50:27 -05:00
InsanityAutomation
d4f5821cd6
Fix 3-point sanity check ( #15696 )
2019-10-28 15:46:59 -05:00
Scott Lahteine
9aff30da0c
Confirm object cancellation ( #15660 )
2019-10-27 19:50:21 -05:00
Scott Lahteine
78899fc241
Followup to E Total
2019-10-27 18:40:33 -05:00
Scott Lahteine
7a342ecb93
Show Total E during print ( #15703 )
2019-10-27 17:49:27 -05:00
Scott Lahteine
0f8c3ed29a
Prevent extra "too long/cold" errors
2019-10-27 17:40:07 -05:00
Scott Lahteine
9720d21301
Clean up trailing whitespace
2019-10-27 15:32:29 -05:00
Scott Lahteine
9e8021d6a4
Fix pins debug of CS/MS pins
2019-10-26 18:46:39 -05:00
Scott Lahteine
ab0fe1a7dd
Tweak G29 faux point
2019-10-26 14:41:54 -05:00
Giuliano Zaro
6fd13879ae
Update Italian language ( #15676 )
2019-10-26 12:54:59 -05:00
Scott Lahteine
600429a067
Cancel Objects followup
2019-10-25 20:08:45 -05:00
Roman Moravčík
e690471739
Print startup message after print statistics are loaded ( #15664 )
2019-10-25 19:46:56 -05:00
Scott Lahteine
732bf89878
Get 'cancelable' for gcode.cpp
2019-10-25 19:38:23 -05:00
Tanguy Pruvot
c58cc113dd
MKS Robin: restore the TFT v2.0 support (ST7789V) ( #15675 )
2019-10-25 19:30:43 -05:00
Scott Lahteine
014b739bac
Fix M486 int parameters
2019-10-25 19:19:33 -05:00
Scott Lahteine
f8ad15fde8
Rename BOARD_STM32F4 to fix use with MB()
2019-10-25 18:12:29 -05:00
Scott Lahteine
408751d5e0
Fix CANCEL_OBJECTS missing include
2019-10-25 15:45:55 -05:00
Evgeny Zyatkov
12a244f24f
Fix #endif typo ( #15661 )
2019-10-25 12:27:23 -05:00
Scott Lahteine
f12285015a
[cron] Bump distribution date
2019-10-25 12:18:21 -05:00
Scott Lahteine
93f0012959
Cancel Objects - As seen at ERRF2019 ( #15590 )
2019-10-24 15:35:40 -05:00
Marcio T
f6a799c7b3
Allow compile under Windows Subsystem for Linux ( #15606 )
2019-10-24 14:57:20 -05:00
InsanityAutomation
82fb046013
Allow suicide pin inverting ( #15586 )
2019-10-24 14:07:28 -05:00
Scott Lahteine
2a7e1d459f
Option to rotate Percent, (E)lapsed, and (R)emaining time ( #15578 )
2019-10-24 14:00:59 -05:00
Scott Lahteine
464d98d178
Short time prefixes, no percent prefix
2019-10-24 14:00:32 -05:00
Scott Lahteine
ff4301a422
Update status_screen_DOGM.cpp
2019-10-24 13:42:02 -05:00
Scott Lahteine
326d5b84e7
Update status_screen_DOGM.cpp
2019-10-24 13:39:32 -05:00
Scott Lahteine
5edd5d1e1f
Clean up
2019-10-24 13:38:39 -05:00
Jacob Jordan
9895e6d766
Only use slow homing speed where applicable ( #15640 )
2019-10-24 13:14:45 -05:00
InsanityAutomation
b3d7d33faf
Fix CUSTOM_VERSION_FILE has_include ( #15635 )
2019-10-24 13:07:29 -05:00
Robby Candra
cf8541a7a7
Fix G92.9 (thus PLR Z position) ( #15625 )
2019-10-24 13:05:50 -05:00
Scott Lahteine
cd3ec5a77b
Add error-check to M422
2019-10-24 12:59:50 -05:00
Timm
e02b06672c
Increase MMU2 serial buffer size with USB serial ( #15646 )
2019-10-24 12:28:41 -05:00
Giuliano Zaro
0f5d457252
Allow redundant temp sensor with SINGLENOZZLE ( #15650 )
2019-10-24 12:23:06 -05:00
Daniel Callander
475041656c
Reset position_shift on G28 ( #15653 )
2019-10-24 12:20:09 -05:00
Bo Herrmannsen
04a55c9188
Fix LPC176x build script for Python 3 ( #15637 )
...
Co-Authored-By: Sven Holzmann <powerprobot@users.noreply.github.com>
2019-10-24 12:16:02 -05:00
milkpirate
6bcd4eb12d
Fix M420 (UBL) undefined variables ( #15621 )
2019-10-24 12:07:17 -05:00
Luu Lac
efeb6efe77
Set pullup on BTN_BACK pin ( #15654 )
2019-10-24 12:04:45 -05:00
Evgeny-SPB
b7db91c46d
Fix apply_rotation function ( #15636 )
2019-10-24 12:02:27 -05:00
Roxy-3D
3642a12fc1
fix parameter order of mark, marked and unmark
...
The parameter order was wrong on mark(), marked() and unmark().
This was breaking the G26 Mesh Validation algorithm.
2019-10-23 11:34:24 -05:00
Scott Lahteine
af214ff121
Fix up PSU_CONTROL checks
2019-10-22 16:16:12 -05:00
Scott Lahteine
62b875f918
Fix PLR condition saving retract
2019-10-22 16:16:12 -05:00
Robby Candra
2c42526763
FIx Estimation String Pos
2019-10-22 10:02:27 +07:00
Robby Candra
d64ab63026
Fix Estimation String Macro
2019-10-22 08:16:29 +07:00
Scott Lahteine
f00b48f9a8
Expand encoder value range
2019-10-21 18:56:24 -05:00
Scott Lahteine
160c8be191
Fix BABYSTEP_DISPLAY_TOTAL output
2019-10-21 13:53:19 -05:00
Robby Candra
52a8bbefcf
Make sure estimate time = 0 not displayed
2019-10-20 23:44:05 +07:00
Robby Candra
6241bcf0c8
Fix Progress at the end of print.
2019-10-20 06:06:48 +07:00
Evgeny Zyatkov
9470554f63
Fix DUE HAL serial defines ( #15594 )
2019-10-19 12:30:38 -05:00
Robby Candra
f368c14a61
Fix Probe Manually Grid ( #15598 )
2019-10-19 12:29:50 -05:00
Scott Lahteine
f2ce4a25a3
Fix host_response_handler debug
2019-10-18 16:47:13 -05:00
Chris Pepper
11f1392026
Fix Python3 (Windows) compatibility ( #15597 )
2019-10-18 21:15:26 +01:00
Scott Lahteine
725ec68faa
[cron] Bump distribution date
2019-10-18 00:00:04 -05:00
Robby Candra
9b88c3e79b
DOGM Progress Display, option to disable display rotation
2019-10-17 05:26:09 +07:00
Scott Lahteine
0652f19673
Fix M420 for moved probe methods
2019-10-16 15:56:34 -05:00
Scott Lahteine
bb381e22b2
Fix left-shift warning
2019-10-16 15:42:46 -05:00
Bo Herrmannsen
0d7736d663
Enable M191 ( #15531 )
2019-10-16 15:02:37 -05:00
Antti Andreimann
40de135d4d
Fix CUSTOM_USER_MENU_TITLE non-translated string ( #15575 )
2019-10-16 13:53:12 -05:00
Francois Rainville
dd0c5de4c7
Provide LONG_FILENAME_LENGTH for headers ( #15582 )
2019-10-16 13:51:18 -05:00
Jason Smith
832cb7e1ac
Z_STEPPER_AUTO_ALIGN — To align with Z stepper points ( #15195 )
2019-10-16 13:39:58 -05:00
Robby Candra
7af99d03d3
Don't show prefix if no elapsed time
2019-10-16 16:25:52 +07:00
Robby Candra
bf850827f7
Fix Progress Display
2019-10-16 16:18:20 +07:00
Scott Lahteine
e0e406dbcc
[cron] Bump distribution date
2019-10-16 00:00:03 -05:00
Scott Lahteine
0ff57c640c
Fix compile warning
2019-10-15 17:13:07 -05:00
Scott Lahteine
3949d246df
Fix ESP32 name conflict
2019-10-15 17:13:07 -05:00
Scott Lahteine
b7b303f4bf
Spindle/Laser power in planner blocks ( #14437 )
2019-10-15 16:10:20 -05:00
Jason Smith
53abfdc2c3
Fix BLTOUCH and FAN PWM conflicts on SKR E3 boards ( #15547 )
2019-10-15 14:18:46 -05:00
Slawomir Ciunczyk
8668571bee
Update Polish language ( #15569 )
2019-10-15 13:36:17 -05:00
Scott Lahteine
faacfe13c2
Tweak M105 layout
2019-10-15 13:35:13 -05:00
Antti Andreimann
d47f29bd4c
Give a dummy response to M105 with zero thermistors ( #15568 )
2019-10-15 13:30:52 -05:00
Piotr
fe4c69b64a
Poll *all* enabled endstop pins ( #15525 )
2019-10-15 13:28:04 -05:00
Slawomir Ciunczyk
99f983d066
Update Polish language ( #15541 )
2019-10-15 12:34:18 -05:00
InsanityAutomation
0074d63962
Vendor version override ( #14189 )
...
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
2019-10-15 12:32:44 -05:00
Scott Lahteine
7622973a31
Fix elapsed time overflow warning
2019-10-15 11:47:24 -05:00
Scott Lahteine
d57a668097
Update Spanish Translation ( #15556 )
2019-10-15 11:38:57 -05:00
Markus Towara
437978d349
Bring SPI_SENSORLESS code up to date ( #15560 )
2019-10-15 11:34:45 -05:00
Tanguy Pruvot
a988f9304d
reduce the required size with uint16_t modifiers
2019-10-14 20:11:59 +02:00
Tanguy Pruvot
21867c7fef
elapsed time overflow warning fix
...
tried to fix it with snprintf in libs/duration_t.h but its worst... :/
2019-10-14 20:00:59 +02:00
sL1pKn07
d37bd33c31
Update Spanish Translation
2019-10-14 16:02:54 +02:00
Roman Moravčík
b4f82d1081
Update Slovak language ( #15527 )
2019-10-13 17:35:38 -05:00
Tanguy Pruvot
ee20f21a24
Fix undefined max in multi-language ( #15521 )
2019-10-13 18:31:28 -04:00
Giuliano Zaro
7714152013
Update Italian language ( #15533 )
2019-10-13 17:28:03 -05:00
Bo Herrmannsen
5ad9257df4
Fix DUE HAL serial defines ( #15536 )
2019-10-13 17:06:15 -05:00
Krystian Booker
62aa137548
Fixed pid_autotune_menu made pid_label accessible ( #15551 )
2019-10-13 16:46:06 -05:00
Roxy-3D
37550e9d98
Allow 3-digit LCD Display of value
...
The LCD Display shows 3 digits of precision, not 4.
So change the bounding value to something more rational.
2019-10-13 14:34:51 -05:00
Roxy-3D
05eed72b69
Allow LCD Menu to adjust Junction Deviation lower
...
Allow LCD Menu to adjust Junction Deviation lower than .01. Some machines currently have a JUNCTION_DEVIATION_MM value as low as .005 mm. In the case of non-Linear-Advance machines... The upper limit is raised to .5 mm.
Probably more thought needs to be given to the Linear Advance case. It maybe it doesn't need a special case and should just use the same bounds as the non-Linear Advance case.
2019-10-12 17:36:43 -05:00
Gustavo Alvarez
df09532a9c
Reassign FIL_RUNOUT_PIN for ReARM boards ( #15519 )
...
Reassign FIL_RUNOUT_PIN from P1_18 to P1_19
P1_18 is connected to a buffer in order to output 5V making it unsuitable for input.
2019-10-12 21:02:20 +01:00
Haxk20
1df90aaf0e
Followup to num2str update ( #15518 )
2019-10-11 08:45:15 -05:00
Matthew Piercey
ac8083588b
Add config for Wanhao Duplicator i3 v2.1
2019-10-11 00:59:58 -05:00
Robby Candra
e79666a82b
Followup to "Fix G2/G3 rounding" ( #15510 )
2019-10-10 21:16:37 -05:00
LinFor
b20d5a7cc6
Estimate Remaining Time (graphical display) ( #15497 )
2019-10-10 21:03:33 -05:00
Scott Lahteine
5641adb01b
Clean up stray tabs
2019-10-10 20:16:16 -05:00
Ed Williams
d8aeeb8ff6
Fix G2/G3 rounding error ( #15507 )
2019-10-10 19:50:08 -05:00
Robby Candra
6f60838736
Fix PAUSE_MODE_CHANGE_FILAMENT menu item ( #15501 )
2019-10-10 19:39:32 -05:00
Robby Candra
ac466ecf74
Change Junction Deviation to Classic Jerk ( #15505 )
2019-10-10 19:31:59 -05:00
Scott Lahteine
3664beec29
Don't refresh on status line changes
2019-10-10 19:29:17 -05:00
Scott Lahteine
13cf417a98
[cron] Bump distribution date
2019-10-10 00:00:04 -05:00
ANMay-ru
b119c14017
Clean up LCD print, align ( #15498 )
2019-10-09 20:41:44 -05:00
Jason Smith
46763efb75
Fix tool-change move with hotend offset ( #15491 )
2019-10-09 19:48:00 -05:00
Marcio Teixeira
6a865a6146
Multi-language support ( #15453 )
2019-10-09 19:46:10 -05:00
Marcio Teixeira
dc14d4a13c
Improvements and fixes to Lulzbot UI ( #15490 )
2019-10-09 19:44:49 -05:00
Scott Lahteine
e6055dce76
Followup to position refactor
2019-10-08 22:08:05 -05:00
Scott Lahteine
af80653f3f
Always report all PIDs in M503
...
Fix #14474
2019-10-08 21:07:19 -05:00
Scott Lahteine
914605c89c
gcc is forgiving of stray ;
2019-10-08 20:36:39 -05:00
Scott Lahteine
89490171ef
Use "concatenatable" language codes
2019-10-08 20:17:23 -05:00
Scott Lahteine
c0005e939c
Enable junction deviation by default ( #15481 )
2019-10-08 19:42:18 -05:00
Scott Lahteine
1df6c7a46c
Work around a compiler bug
...
See #15478
2019-10-08 19:27:03 -05:00
Scott Lahteine
5becda25c5
Followup to E renumbering
2019-10-08 17:37:17 -05:00
Scott Lahteine
cb1cb72c76
Fix Move Z menu item
2019-10-08 17:24:40 -05:00
LinFor
58f81f8e7e
Followup to progress override ( #15488 )
2019-10-08 15:24:14 -05:00
Scott Lahteine
d45ab47139
[cron] Bump distribution date
2019-10-08 14:33:57 -05:00
Scott Lahteine
cc822c1a05
Use lambdas in menus, where possible ( #15452 )
2019-10-07 19:44:33 -05:00
Scott Lahteine
59508edf64
Suppress data[] array warning
2019-10-07 19:32:23 -05:00
Scott Lahteine
e84389c976
Fix G2/G3 workspace plane parameters ( #15475 )
2019-10-07 17:09:20 -05:00
LinFor
19b7be067c
Allow M73 to override SD position ( #15449 )
2019-10-07 16:38:58 -05:00
chzj333
d04561805b
Support for BTT SKR Mini E3 v1.2 ( #15476 )
2019-10-07 15:45:11 -05:00
InsanityAutomation
71526fa5ce
Fix ExtUI onMeshUpdate event ( #15477 )
2019-10-07 15:39:52 -05:00
Scott Lahteine
56595a4c9c
Improve G2/G3 precision
...
See https://github.com/MarlinFirmware/Marlin/issues/14745#issuecomment-538781253
2019-10-07 00:03:17 -05:00
Scott Lahteine
211ff67440
Patch blocking and manual moves
2019-10-06 23:58:19 -05:00
Tanguy Pruvot
c6ffa7f38d
MKS Robin: SD pins not required (SDIO) ( #15474 )
2019-10-06 23:20:43 -05:00
Scott Lahteine
519cc1bc67
NUM_AXIS is now obsolete
2019-10-06 22:18:16 -05:00
Scott Lahteine
9188ce1a8d
Add JOIN for simple append
2019-10-06 22:01:06 -05:00
Scott Lahteine
51ae13fc8c
Compact MIN/MAXTEMP_ALL
2019-10-06 21:58:58 -05:00
Scott Lahteine
5449088a8e
Fix Japanese language extra define
2019-10-06 21:58:58 -05:00
Me No Dev
fc6a0937b8
Improve Malyan M200 integration ( #15462 )
2019-10-05 22:37:22 -05:00
Giuliano Zaro
a1ad01e4ab
Limit Case Light PWM ( #15459 )
2019-10-05 22:32:50 -05:00
Scott Lahteine
f8498d8a52
GET_TEXTF => GET_TEXT_F
2019-10-05 20:47:28 -05:00
LinFor
e854eb933d
Allow pins overrides for SKR V1.3 ( #15451 )
2019-10-05 20:40:01 -05:00
Jimmy Page
203d260a41
Update Japanese font and translation ( #15470 )
2019-10-05 20:35:20 -05:00
Daniel Andersen
0076e1e792
Fix CR10 Stock Display timing with SKR_PRO V1.1 ( #15446 )
2019-10-05 20:33:46 -05:00
Giuliano Zaro
a3ec573984
Uniform fan speed & case light
2019-10-05 18:34:11 -05:00
Giuliano Zaro
ff55601dc3
Update Italian language
2019-10-05 18:30:48 -05:00
Roman Moravčík
b90dff020e
Update Slovak language
2019-10-05 18:29:17 -05:00
Giuliano Zaro
43aba9f918
Fix compile errors & temp range
2019-10-05 18:27:03 -05:00
Scott Lahteine
1ac629f919
[cron] Bump distribution date
2019-10-05 00:00:09 -05:00
Luu Lac
5d81d7cefe
if no HOTENDS
2019-10-04 16:18:18 -05:00
Tanguy Pruvot
895f64fbab
Add missing MKS Robin TOUCH_CS_PIN ( #15445 )
2019-10-04 01:51:07 -05:00
Scott Lahteine
b7dfbb6af5
[cron] Bump distribution date
2019-10-04 00:00:05 -05:00
Scott Lahteine
c83c2a5022
Patch compile glitches
2019-10-03 15:37:13 -05:00
Scott Lahteine
6b945eb548
Show "FILAMENT CHANGE" during filament change
2019-10-03 07:45:52 -05:00
Scott Lahteine
0322348924
Handle runout in runout.cpp
2019-10-03 06:27:30 -05:00
Scott Lahteine
72d791a736
Standardize active/paused functions
2019-10-03 06:27:30 -05:00
Scott Lahteine
719615a6b6
Simplify edit menu items
...
The `edit` part of menu items displaying values is not needed. Menu edit types can be modeled on sub-menus.
2019-10-03 06:27:30 -05:00
Scott Lahteine
273cbe931e
Aliases for common menu item types
2019-10-03 06:15:21 -05:00
tonokip
df48ef6df3
Fix step timer on Archim1 ( #15447 )
2019-10-03 03:29:15 -05:00
Scott Lahteine
acbe84c8ef
[cron] Bump distribution date
2019-10-03 00:00:05 -05:00
Scott Lahteine
d0ef7b6588
[cron] Bump distribution date
2019-10-02 00:00:04 -05:00
Oliver Jean Eifler
d52b908627
Fix coordinate size for G26 w/out arcs ( #15443 )
2019-10-01 20:02:27 -05:00
InsanityAutomation
438835f6a5
Configurable Max Accel, Max Feedrate, Max Jerk edit limits ( #13929 )
2019-10-01 19:59:48 -05:00
Scott Lahteine
f9400b6a3c
[cron] Bump distribution date
2019-10-01 00:00:05 -05:00
Scott Lahteine
7cd72de8bc
General cleanup, style
2019-09-30 22:57:23 -05:00
Scott Lahteine
806d64e1bf
X_SENSORLESS includes AXIS_HAS_STALLGUARD
2019-09-30 22:56:22 -05:00
Scott Lahteine
e3fd0519b3
Reduce need for UNUSED
2019-09-30 22:56:22 -05:00
Marcio Teixeira
e3ff27c95a
Prevent duplication of PSTRs to save memory ( #15435 )
2019-09-30 22:53:34 -05:00
LinFor
98f614ddb1
Use MAX_BED_POWER instead of BANG_MAX to heat outside PID_FUNCTIONAL_RANGE ( #15431 )
2019-09-30 22:19:12 -05:00
Marcio Teixeira
087fe0e9d6
Improve and fix LULZBOT_TOUCH_UI ( #15434 )
...
- Add start print confirmation dialog box
- Fix incorrect text colors in UI
- Adjust bio printer UI
2019-09-30 22:15:48 -05:00
Timm
b198f321c8
Add missing motion inline methods ( #15433 )
2019-09-30 19:57:22 -05:00
Giuliano Zaro
15efe8d839
Update Italian language ( #15436 )
2019-09-30 19:31:06 -05:00
Scott Lahteine
a9c259c77a
Patch PrintrboardG2 build (on spec)
2019-09-30 02:47:55 -05:00
DrDitto
55b8547f04
Simplify MKS_MINI_12864 init (move 5ms to u8g seq.) ( #15428 )
2019-09-30 02:11:58 -05:00
Scott Lahteine
b7a9481e01
[cron] Bump distribution date
2019-09-30 00:00:04 -05:00
Scott Lahteine
139b7196a0
Watchdog cleanup ( #15283 )
2019-09-29 17:57:29 -05:00
Scott Lahteine
24706aedbd
Fix Neopixel typos
2019-09-29 17:36:29 -05:00
Scott Lahteine
f307ff68f7
Multiply by float, not double
2019-09-29 17:25:27 -05:00
Scott Lahteine
74746c6573
Fix probe_offset EEPROM field test
2019-09-29 16:55:50 -05:00
Alex Somesan
10bbed7f69
Fix comma/semicolon typo ( #15420 )
2019-09-29 16:50:53 -05:00
Bob Kuhn
178dcd6fd8
SPI chaining with TMCStepper simplified interface ( #15179 )
2019-09-29 05:47:20 -05:00
Frederik Kemner
4564ad2920
Fix build if EXTRUDERS = 0 ( #15417 )
2019-09-29 04:32:24 -05:00
Scott Lahteine
50e4545255
Add custom types for position ( #15204 )
2019-09-29 04:25:39 -05:00
Tanguy Pruvot
43d6e9fa43
STM32F103.. reorganization, SKR mini fix ( #15398 )
2019-09-29 02:04:53 -05:00
Scott Lahteine
5e9898600b
[cron] Bump distribution date
2019-09-29 00:00:07 -05:00
Scott Lahteine
f2d93f61c3
Revert errant const
2019-09-28 23:52:54 -05:00
Scott Lahteine
7c5e6900e1
Tweak comment
2019-09-28 22:08:02 -05:00
Tim Moore
7e72768433
Info Menu: Runaway Watch state ( #14827 )
2019-09-28 21:53:40 -05:00
Scott Lahteine
81b9c7c6ee
No motion constraint before homing
...
Sensible approach to soft endstops before the machine is homed.
Ref: https://github.com/MarlinFirmware/Marlin/pull/15027#issuecomment-533301094
Co-Authored-By: comps <comps@nomail.dom>
2019-09-28 21:35:49 -05:00
Christian
ddded80ff3
Fix mixing for up to 6 steppers ( #15374 )
2019-09-28 19:12:23 -05:00
Scott Lahteine
8683d4abfd
Improved list-oriented macros
2019-09-28 19:03:07 -05:00
InsanityAutomation
0ca6abce72
Add reporting to M290 ( #15376 )
2019-09-28 16:58:48 -05:00
InsanityAutomation
e942b352c6
Fix Photograph Pin Sanity Check ( #15406 )
2019-09-28 16:18:23 -05:00
Ludy
41ea2d8c31
Fix auto-fan compile error ( #15402 )
2019-09-28 15:37:41 -05:00
InsanityAutomation
be3c4a7930
Bring Raptor pins in parity with others ( #15410 )
2019-09-28 15:35:13 -05:00
Ludy
a628d77798
Fix compile error with 6 hot-ends ( #15405 )
2019-09-28 15:30:41 -05:00
Ludy
6509dc04f5
Fix German error ( #15404 )
2019-09-28 15:29:41 -05:00
Scott Lahteine
2277c6dffc
Optimize SD card reader, sorting ( #15395 )
2019-09-28 15:28:05 -05:00
Scott Lahteine
1834d86df5
Fix sanity check typos
2019-09-28 15:26:21 -05:00
InsanityAutomation
a6b0223eea
Revive and improve DELTA probe bounds, LRFB options ( #15372 )
2019-09-28 01:19:11 -05:00
Maxim
1b9fc64d8a
Add M997 support for SKR PRO 1.1 ( #15394 )
2019-09-28 00:54:30 -05:00
Scott Lahteine
f57ce2b40a
[cron] Bump distribution date
2019-09-28 00:00:04 -05:00
Scott Lahteine
ebfdf740bc
EZBoard only knows stock display
2019-09-27 22:08:13 -05:00
InsanityAutomation
5221e2d991
Restore Host Prompt Info ( #15387 )
2019-09-27 17:06:26 -05:00
Marcio Teixeira
02bbc51195
Keep C extension for now, restore (void) arg ( #15380 )
2019-09-27 14:02:35 -05:00
Giuliano Zaro
a8aca59c04
Update Italian language ( #15373 )
2019-09-27 13:05:53 -05:00
Scott Lahteine
4c16661153
Use named styles in draw_menu_item_static
2019-09-27 04:45:01 -05:00
Scott Lahteine
d683f98019
Return buffer in duration.toString
2019-09-27 04:45:01 -05:00
Scott Lahteine
dc65788511
Shorthand for __VA_ARGS__
2019-09-27 04:43:34 -05:00
Marcio Teixeira
a18d16fb8b
Do not implicitly concatenate localized strings ( #15383 )
2019-09-27 04:38:43 -05:00
Scott Lahteine
62e4e05a19
[cron] Bump distribution date
2019-09-27 00:00:04 -05:00
Berezovskyi Oleksandr
c0d5b57cf9
Init i2c for all i2c EEPROM use ( #15366 )
2019-09-26 22:25:56 -05:00
Scott Lahteine
665e45e0ba
Reduce string storage, use masking 'seen'
2019-09-26 04:30:55 -05:00
Scott Lahteine
455dabb183
Add a feedRate_t data type ( #15349 )
2019-09-26 01:28:09 -05:00
Scott Lahteine
ee7558a622
Tweaks to Z fade behavior
2019-09-26 01:15:47 -05:00
Scott Lahteine
d49d40f7b0
Home XYZ newline
2019-09-25 22:26:16 -05:00
Scott Lahteine
b72fd7ea9c
Supply 'super' for servo subclasses
2019-09-25 22:07:14 -05:00
Scott Lahteine
b2e1f77f58
Fix extraneous "Home XYZ First" message
2019-09-25 21:57:20 -05:00
Scott Lahteine
39578a5919
Fix probe without leveling
2019-09-25 19:57:52 -05:00
Marcio Teixeira
8cbb5350ad
Refactor joystick support in ExtUI ( #15318 )
2019-09-25 18:46:36 -05:00
DrDitto
04e4eb35be
MKS_MINI, FYSETC RGB, backlight ( #15334 )
2019-09-25 18:41:04 -05:00
Scott Lahteine
ddd9d9032a
Fix option / string name conflict
2019-09-25 17:12:13 -05:00
Robby Candra
c3f09e2b1b
Set MAX_OVERSHOOT_PID_AUTOTUNE to 30 ( #15257 )
2019-09-25 09:43:00 -05:00
Jason Smith
f98999ca20
Fix includes in RAMPS_DUO and RAMPS_SMART ( #15321 )
2019-09-25 09:42:03 -05:00
Scott Lahteine
0b4aedf13e
Less use of "this"
2019-09-25 09:29:58 -05:00
Scott Lahteine
661c3cfc99
Fix mesh bounds for MBL
2019-09-25 09:05:46 -05:00
Scott Lahteine
25c4c2f24e
Fix bool in M851
2019-09-25 08:39:11 -05:00
Scott Lahteine
da1bda493e
Apply Marlin conventions to M851
2019-09-25 03:57:16 -05:00
InsanityAutomation
e9cf46a9a5
M851 XY 3 point followup (incomplete) ( #15361 )
2019-09-25 02:43:41 -05:00
Jason Smith
66d0221077
Fix build with more than 2 Trinamic E steppers ( #15329 )
2019-09-25 02:30:07 -05:00
Robby Candra
9c288a682d
Followup to probe_at_point change ( #15342 )
2019-09-25 02:29:10 -05:00
Marcio Teixeira
149e9b733e
Simplified ExtUI language selection ( #15359 )
2019-09-25 01:25:21 -05:00
Jason Smith
53124ca6b7
Fix 32-bit crash due to fwretract_settings_t pack(1) ( #15333 )
2019-09-25 01:08:30 -05:00
Scott Lahteine
bd6d144cdb
[cron] Bump distribution date
2019-09-25 00:00:04 -05:00
Scott Lahteine
5288c399ce
Patch probe offset name, defines
2019-09-24 23:39:23 -05:00
Scott Lahteine
4e8d9fe59b
zprobe_offset => probe_offset
2019-09-24 23:36:09 -05:00
Scott Lahteine
3819f79945
Fix pid_output declaration
2019-09-24 22:32:13 -05:00
InsanityAutomation
df1e51258a
Add M851 X Y probe offsets ( #15202 )
2019-09-24 21:29:21 -05:00
Scott Lahteine
ebc9a8a0b0
ExtUI patch followup
2019-09-24 20:21:31 -05:00
Marcio Teixeira
4ff59d178d
LULZBOT_TOUCH_UI extended character set ( #15301 )
2019-09-24 18:49:40 -05:00
Scott Lahteine
bd2b44c4ed
Require newest TMCStepper
2019-09-24 18:00:06 -05:00
Marcio Teixeira
bafcd084cc
LULZBOT_TOUCH_UI performance/cosmetic fixes ( #15319 )
2019-09-24 17:46:00 -05:00
Jason Smith
9aaa056286
Fix SCARA build from Arduino IDE ( #15317 )
2019-09-24 17:29:25 -05:00
Scott Lahteine
48e2f90304
Improve TMC sanity checks
2019-09-24 17:20:39 -05:00
Scott Lahteine
07eb213046
[cron] Bump distribution date
2019-09-24 00:00:11 -05:00
Scott Lahteine
5e13fe989f
Rename some feedrate-oriented functions
2019-09-23 22:36:41 -05:00
Scott Lahteine
9e7e8e229c
[cron] Bump distribution date
2019-09-23 00:00:08 -05:00
Scott Lahteine
6c62732ae1
Handle no Timer 3C
2019-09-22 21:50:18 -05:00
Scott Lahteine
7fc4f7b815
[cron] Bump distribution date
2019-09-21 00:00:13 -05:00
Scott Lahteine
13d725d24d
Tweak debug messages
2019-09-20 23:35:22 -05:00
Jason Smith
6ed2bf631d
Fix FILAMENT_RUNOUT_SCRIPT without ADVANCED_PAUSE_FEATURE build ( #15313 )
2019-09-20 00:50:11 -05:00
Jason Smith
514223f960
Fix BACKLASH_COMPENSATION compiler issues ( #15307 )
2019-09-20 00:48:41 -05:00
Scott Lahteine
de78b61d35
[cron] Bump distribution date
2019-09-20 00:00:10 -05:00
InsanityAutomation
6a312fae80
Add before/after dir change delays ( #15314 )
2019-09-19 23:05:17 -05:00
Scott Lahteine
1803c27afb
Fix macros for overloaded comparisons
2019-09-19 02:16:40 -05:00
Scott Lahteine
86e0b9eb05
[cron] Bump distribution date
2019-09-19 00:00:08 -05:00
Marcio Teixeira
7f117bfc60
EXTENSIBLE_UI Joystick support ( #15303 )
2019-09-18 19:35:03 -05:00
Jason Smith
252f31b6f1
Fix/improve backoff feedrates ( #15300 )
2019-09-18 17:04:13 -05:00
Scott Lahteine
bcf630d8d1
Clarify a sanity check
2019-09-18 16:43:30 -05:00
Scott Lahteine
c44b5fd13a
Try to fit logo by narrowing icons
2019-09-18 16:43:30 -05:00
Scott Lahteine
d5a34afa56
Undefine pins only in debug list
2019-09-18 11:53:42 -05:00
Scott Lahteine
712aaa26d5
Use provided 'constrain'
2019-09-18 04:07:14 -05:00
Scott Lahteine
1a1375964f
Drop unused G26 function
2019-09-18 04:07:14 -05:00
Robby Candra
787d522036
LCD Size Defines ( #15297 )
2019-09-18 02:58:58 -05:00
Marcio Teixeira
b590ae4875
LULZBOT_TOUCH_UI: Only use %S on AVR ( #15292 )
2019-09-18 02:33:26 -05:00
Scott Lahteine
ce74e4b3e4
Undefine… redux
2019-09-18 00:28:26 -05:00
Scott Lahteine
356b582a9f
[cron] Bump distribution date
2019-09-18 00:00:05 -05:00
Scott Lahteine
b73744f9e7
Update ExtUI, add test under DUE ( #15298 )
2019-09-17 23:41:34 -05:00
Scott Lahteine
b39ab3db37
Sanity-check for SD reprint
2019-09-17 23:34:14 -05:00
Scott Lahteine
34d521234d
Undefine pins to reduce warnings
2019-09-17 23:34:14 -05:00
Scott Lahteine
73ac213cdd
Fix FileList::isAtRootDir
2019-09-17 23:34:14 -05:00
Scott Lahteine
b71a755a30
Add float suffix in G33
2019-09-17 23:30:27 -05:00
Scott Lahteine
c353eaa146
Misc changes from struct refactor ( #15289 )
2019-09-17 18:16:28 -05:00
Tanguy Pruvot
7c3d52cd6b
HAL_DUE build fix ( #15286 )
2019-09-17 04:51:27 -05:00
Scott Lahteine
2405ccb7ef
Patch use of UNUSED
2019-09-17 00:05:35 -05:00
Scott Lahteine
282c39e3d0
[cron] Bump distribution date
2019-09-17 00:00:06 -05:00
Tanguy Pruvot
d277e93f4d
Configurable TOUCH_BUTTONS repeat delays ( #15245 )
2019-09-16 21:32:55 -05:00
Scott Lahteine
f01f0d1956
Drop C-style 'void' argument
2019-09-16 20:31:21 -05:00
Scott Lahteine
7d8c38693f
Formatting
2019-09-16 20:31:21 -05:00
Scott Lahteine
a06010e08a
Macrofy attachInterrupt
2019-09-16 20:31:20 -05:00
Marcio Teixeira
4c00ddae56
Remove obsolete LULZBOT_TOUCH_UI code ( #15284 )
2019-09-16 19:45:05 -05:00
Robby Candra
98233b1de0
Add root flag to CardReader ( #15275 )
2019-09-16 17:49:55 -05:00
Tanguy Pruvot
eb1a368277
Fix Lerdge K typos ( #15273 )
2019-09-16 16:50:57 -05:00
Marcio Teixeira
7a569ad4d0
LULZBOT_TOUCH_UI fixes. Fix some warnings. ( #15276 )
2019-09-16 16:49:46 -05:00
Bas Stottelaar
847e4ced11
Fix M43 without watchdog ( #15280 )
2019-09-16 16:09:43 -05:00
Scott Lahteine
7e95ee9e4b
Patch missing millis
2019-09-16 15:57:25 -05:00
Scott Lahteine
d63e0f6d98
Pending refactor tweaks
2019-09-16 15:10:14 -05:00
Scott Lahteine
9c218381c5
[cron] Bump distribution date
2019-09-16 00:00:05 -05:00
J.C. Nelson
896162b722
Add pins for Lerdge X and K. ( #15271 )
2019-09-15 15:23:04 -05:00
Giuliano Zaro
c96844fae2
[SAMD51] Remove RuRamps4D ( #15264 )
2019-09-15 14:17:20 -05:00
Tanguy Pruvot
02d400e413
STM32F1: Sync SPI changes from maple master ( #15266 )
2019-09-15 13:46:17 -05:00
Scott Lahteine
20fbb751f1
Tell externals it's Marlin
2019-09-15 03:12:44 -05:00
Scott Lahteine
d5f5203880
Use "mount" as card verb
2019-09-15 03:12:44 -05:00
Tanguy Pruvot
2386c147ad
Mount the SD card early ( #15255 )
2019-09-15 03:05:01 -05:00
Scott Lahteine
c4090b1375
[cron] Bump distribution date
2019-09-15 00:00:05 -05:00
Scott Lahteine
79635f8e94
Fix some debug out lines
2019-09-14 16:45:06 -05:00
Marcio Teixeira
18821f29d5
LULZBOT_TOUCH_UI: Localization, runtime language selection ( #15249 )
2019-09-14 06:51:49 -05:00
Tanguy Pruvot
15bea5043c
Followup to SD menu optimization ( #15252 )
2019-09-14 06:42:28 -05:00
Evgeny Zyatkov
61e3f119f4
FYSETC_MINI_12864 pins for SKR PRO 1.1 ( #15253 )
2019-09-14 06:22:30 -05:00
Scott Lahteine
465c6d9230
Simpler Allen Key config. Fixes, cleanups from refactor ( #15256 )
2019-09-14 03:05:10 -05:00
Scott Lahteine
ffb418b226
Move some SD comments
2019-09-14 02:31:47 -05:00
Robby Candra
acd76e8609
Allow odd mm bed sizes ( #15258 )
2019-09-14 01:26:14 -05:00
Scott Lahteine
bbbfb0015b
[cron] Bump distribution date
2019-09-14 00:00:14 -05:00
Scott Lahteine
ef8ce2e2e5
Allow TEMP_CHAMBER_PIN override
2019-09-13 18:45:59 -05:00
Scott Lahteine
f9961ddebb
Optimize SERIAL_ECHOPAIR_F
2019-09-13 08:47:41 -05:00
Frederik Kemner
3348a7d223
Fix Info Menu with EXTRUDERS==0 ( #15230 )
2019-09-13 01:36:44 -05:00
Tanguy Pruvot
2435c6082a
STM32F1: AUTO_BED_LEVELING_UBL build fixes ( #15240 )
2019-09-13 01:33:33 -05:00
Scott Lahteine
ae7ae89bb3
[cron] Bump distribution date
2019-09-13 00:00:04 -05:00
Robby Candra
3f129b6574
Touch Buttons variable repeat delay ( #15236 )
2019-09-12 22:14:24 -05:00
Tanguy Pruvot
5bf635cec2
STM32F1: Only include USBComposite if flagged ( #15243 )
2019-09-12 18:35:27 -05:00
Robby Candra
1ab3521351
Optimize Media Menu display/scrolling ( #15233 )
2019-09-12 18:06:07 -05:00
Tanguy Pruvot
f1162243f6
STM32F1: No USBSerial without USB-serial bridge ( #15242 )
2019-09-12 17:59:31 -05:00
Scott Lahteine
7cf1befbec
[cron] Bump distribution date
2019-09-12 00:01:23 -05:00
Tanguy Pruvot
3eacc3bfce
french update, g26, usb ( #15229 )
...
french update for G26 and USB.
2019-09-11 14:36:39 -05:00
Gustavo Alvarez
2b628553d3
Update Spanish language ( #15189 )
2019-09-11 12:14:10 -05:00
reloxx13
05cd483413
STM32F1: Support M997 - Reset and begin flash ( #15209 )
2019-09-11 12:12:58 -05:00
Scott Lahteine
e3278f22f3
General formatting
2019-09-11 03:29:00 -05:00
Scott Lahteine
f9992c5f33
Implausible
2019-09-11 02:52:14 -05:00
Scott Lahteine
6091e6300a
Fix G90, G91, M82, M83 rel/abs modes ( #15218 )
2019-09-11 01:29:33 -05:00
Scott Lahteine
41a3fbceac
[cron] Bump distribution date
2019-09-11 00:00:04 -05:00
Marcio Teixeira
47d19bab40
Lulzbot ExtUI Western language support ( #15208 )
...
Fix #15134
2019-09-10 20:07:03 -05:00
Scott Lahteine
c590e8ac05
Improve Power-loss Recovery ( #15135 )
2019-09-10 18:52:41 -05:00
Scott Lahteine
75927e17dd
Filament Width Sensor singleton ( #15191 )
2019-09-10 18:48:58 -05:00
Scott Lahteine
fe6ba4fd70
Tweak REMEMBER
2019-09-10 02:21:21 -05:00
Scott Lahteine
584c86bed1
More "zero extruders" changes ( #15213 )
2019-09-10 02:20:49 -05:00
Scott Lahteine
54abf3aeba
[cron] Bump distribution date
2019-09-10 00:00:06 -05:00
InsanityAutomation
dcc39421c5
Minor Pin Updates ( #15214 )
2019-09-09 23:58:57 -05:00
thisiskeithb
66338ed515
CR-10 Stock Display for SKR Mini 1.1 ( #15215 )
2019-09-09 23:56:02 -05:00
Scott Lahteine
f055f7c535
Add emergency_parser.h dependency
2019-09-09 18:04:25 -05:00
Scott Lahteine
841c8ce0d9
Remove PROMPT_INFO / PROMPT_GCODE_INFO ( #15210 )
2019-09-09 15:43:06 -05:00
Ludy
3c3a956a17
Fix compiling error BIGTREE_SKR_MINI ( #15197 )
...
Let's get STM32F1 working again!
2019-09-09 10:34:54 -05:00
Scott Lahteine
565a0e11ed
Prevent 'current' name conflict, if needed
2019-09-09 03:17:11 -05:00
Scott Lahteine
713157f712
Move L6470 enum
2019-09-09 00:27:53 -05:00
Scott Lahteine
5949c24afc
[cron] Bump distribution date
2019-09-09 00:00:05 -05:00
Scott Lahteine
dbea6f0022
STM32F1 USB cdc/msc composite device ( #15180 )
...
Co-Authored-By: bigtreetech <38851044+bigtreetech@users.noreply.github.com>
2019-09-08 02:28:22 -05:00
Luu Lac
8bca3fcf2c
Display chamber with HAS_TEMP_CHAMBER ( #15194 )
2019-09-08 02:20:18 -05:00
Roman Moravčík
ca0f47985b
Update Slovak language ( #15187 )
2019-09-08 01:47:36 -05:00
InsanityAutomation
0693767efa
ExtUI Pause/Stop on all Pause/Stop ( #15188 )
2019-09-08 01:47:07 -05:00
Scott Lahteine
1c3a1ab2c6
Use _MIN over MIN
2019-09-08 01:02:15 -05:00
Lucio Tarantino
8ac52aedff
M118 multiserial support ( #15176 )
2019-09-08 00:57:59 -05:00
Jamie
dbee0e9c54
Analog joystick jogging control ( #14648 )
2019-09-08 00:55:34 -05:00
Ludy
068c303742
More translatable LCD strings ( #15190 )
2019-09-08 00:15:25 -05:00
Tanguy Pruvot
ec3f29a33a
Fix linux_native long to int32 warnings ( #15192 )
2019-09-07 20:30:47 -05:00
ManuelMcLure
eed7c2fe2f
Fix 'echo:' in TMC parameters M503 report ( #15193 )
2019-09-07 20:29:38 -05:00
Ludy
6172cd2528
CHAMBER integration to GLCD ( #14981 )
2019-09-07 04:52:57 -05:00
Scott Lahteine
94948d3dcb
Compact some sanity conditions
2019-09-06 19:03:04 -05:00
AnHardt
b7b0021b5c
Fix Thermistor 75 ( #15181 )
2019-09-06 16:23:27 -05:00
Scott Lahteine
ca1a3476cb
[cron] Bump distribution date
2019-09-06 00:00:04 -05:00
Scott Lahteine
91c3b8e3ca
Reformat ADC cases
2019-09-05 20:02:31 -05:00
Scott Lahteine
4cdf7a1b93
Add ADC helpers to temp_info_t
2019-09-05 19:48:52 -05:00
Scott Lahteine
72876d9045
Clean up u8g defines
2019-09-05 17:09:24 -05:00
Scott Lahteine
8d036e94bf
Combine channel-based SPI headers
2019-09-05 17:09:24 -05:00
Scott Lahteine
70b3f4ded5
Pins error message
2019-09-05 15:44:13 -05:00
Ludy
01fd3f904f
Drop extra include ( #15171 )
2019-09-05 13:21:06 -05:00
Tanguy Pruvot
50e1bf57b9
Fix RRD/CR10 LCD on STM32F1/F4 ( #15172 )
2019-09-05 13:20:03 -05:00
Scott Lahteine
bf3cd8e5aa
Tweak var names
2019-09-05 01:40:09 -05:00
Scott Lahteine
37d3c7288f
[cron] Bump distribution date
2019-09-05 00:00:04 -05:00
Scott Lahteine
7496e1cd67
whitespace
2019-09-04 21:55:41 -05:00
Scott Lahteine
060b360be3
Provide a good default contrast
...
In reference to #15139
2019-09-04 18:29:22 -05:00
kakou-fr
6b1c4dec46
Touch Mi: Add magnet Y position ( #15166 )
2019-09-04 18:09:12 -05:00
Tanguy Pruvot
85f0556118
Add XPT2046 calibration functions ( #15140 )
2019-09-04 17:32:20 -05:00
Ludy
beffcd856b
Update German language, (c) ( #15164 )
2019-09-04 16:59:26 -05:00
Karl Andersson
123ecfe613
Allow MINIMUM_STEPPER_PULSE override with LV8729 ( #15162 )
2019-09-04 16:57:13 -05:00
Scott Lahteine
2d2d9da9f2
Tweak u8g impl file includes
2019-09-04 14:52:22 -05:00
Scott Lahteine
a07c4af393
Tweak animated draw call
2019-09-04 14:47:08 -05:00
Scott Lahteine
7ad5208267
Fix up boot screen code
...
Followup to #15125
Co-Authored-By: Ludy <ludy87@users.noreply.github.com>
2019-09-04 14:43:32 -05:00
Robby Candra
6b05d5d65d
Allow TOUCH_BUTTONS to be swapped ( #15100 )
2019-09-04 13:13:05 -05:00
George Fu
8e044ea898
Fix up Fysetc configs, pins. Fix menu type float5. ( #15157 )
2019-09-04 13:06:23 -05:00
Jamie
293b890940
Apply soft limits to G2/G3 final target ( #15156 )
2019-09-04 13:02:30 -05:00
Scott Lahteine
d9bbe0ff02
[cron] Bump distribution date
2019-09-04 00:00:03 -05:00
thisiskeithb
d577b3c21e
Fix MKS SGEN-L Pins ( #15153 )
2019-09-03 20:02:30 -05:00
AnHardt
89a2161cac
MINIMUM_STEPPER_DIR_DELAY in LA ( #15154 )
...
Add missed MINIMUM_STEPPER_DIR_DELAY after dir change in LinearAdvance interrupt.
2019-09-03 20:01:51 -05:00
Scott Lahteine
75efa3cdac
Reorganize HAL ( #14832 )
2019-09-02 19:49:58 -05:00
thisiskeithb
cdd5056aba
Increase MKS MINI 12864 default contrast ( #15139 )
2019-09-02 19:40:58 -05:00
Scott Lahteine
c97c393c4a
Fix "unqualified id" warning ( #15144 )
2019-09-02 19:35:05 -05:00
Scott Lahteine
12344085c0
Update temperature.cpp
2019-09-02 19:21:47 -05:00
Giuliano Zaro
12c595c61f
SAMD51 LCD support ( #15113 )
2019-09-02 05:45:02 -05:00
Scott Lahteine
23bb40d0ea
Fix MKS_MINI_12864 init
...
See #13550
Co-Authored-By: DrDitto <drditto@users.noreply.github.com>
2019-09-02 05:24:36 -05:00
Giuliano Zaro
9958f5e322
Home on G34 if steppers slept ( #15127 )
2019-09-02 02:44:48 -05:00
thisiskeithb
59152f2671
Flash-based EEPROM on SKR Mini E3 DIP ( #15128 )
2019-09-02 02:42:11 -05:00
Tanguy Pruvot
c9817105fb
Update French language ( #15129 )
2019-09-02 02:40:33 -05:00
Giuliano Zaro
e6a114b853
Update Italian language ( #15130 )
2019-09-02 02:39:40 -05:00
Gustavo Alvarez
54069823a0
Update Spanish language ( #15132 )
2019-09-02 02:36:32 -05:00
Scott Lahteine
93dcc22aae
Drop extra call to get_available_commands
2019-09-02 01:14:03 -05:00
Scott Lahteine
451a942e95
Suspend queue during wait_for_hotend
2019-09-02 01:14:03 -05:00
Scott Lahteine
b4715b29bb
[cron] Bump distribution date
2019-09-02 00:00:04 -05:00
Scott Lahteine
34b73426e5
Apply #ifdef/#ifndef where possible
2019-09-01 23:54:50 -05:00
Scott Lahteine
4078f2672e
Apply shorthand option macros
2019-09-01 23:43:48 -05:00
Scott Lahteine
a2e412c0ce
Rename command buffer var
2019-09-01 20:43:31 -05:00
weakset
ee240d21b9
Use Flash-based EEPROM on SKR mini-E3 ( #15126 )
2019-09-01 04:04:40 -05:00
Jason Smith
be051c890f
Fix Z_STEPPER_ALIGN_[XY] sanity error ( #15124 )
2019-09-01 04:00:20 -05:00
Scott Lahteine
586b334c2a
Split up stepper indirection ( #15111 )
2019-08-31 19:44:45 -05:00
Scott Lahteine
66f1da762f
Use 'ui.' where possible
2019-08-31 01:07:01 -05:00
Robby Candra
26fa08548c
Add RGB565 Color Definitions for TFT ( #15099 )
2019-08-30 22:49:24 -05:00
Scott Lahteine
0f4d3e1bca
Fix ESP32 "DISABLED" name conflict
2019-08-30 22:37:28 -05:00
Scott Lahteine
1eeef30097
A single generate_click lambda
2019-08-30 19:17:59 -05:00
Tanguy Pruvot
c014f8dc78
Fix STM32F1 SPI warning (gcc 8.2.1) ( #15104 )
2019-08-30 18:15:04 -05:00
Tanguy Pruvot
d068470e18
Prevent Linux min/max error ( #15107 )
2019-08-30 17:46:09 -05:00
Bob Kuhn
ba91bca1eb
TMC SPI daisy chain support (experimental) ( #15081 )
2019-08-30 17:39:45 -05:00
Scott Lahteine
0bcb64403c
Revert _BV testing commit
...
This reverts commit 9223261ea9
2019-08-30 16:11:16 -05:00
Scott Lahteine
05ef9b2f55
[cron] Bump distribution date
2019-08-30 14:44:39 -05:00
Scott Lahteine
9223261ea9
Only define _BV in Marduino.h
2019-08-29 18:06:24 -05:00
Scott Lahteine
d25231aea8
Spacing, defined(), #include tweaks
2019-08-29 18:06:24 -05:00
Karl Andersson
7ebfae27e3
Fix HAL_STM32 SPI regression ( #15093 )
...
Reference: 0b47558
2019-08-29 17:00:01 -05:00
Ludy
3f77d6a551
Fix expire_status warning ( #15094 )
2019-08-29 16:05:22 -05:00
Robby Candra
38983fdfa9
Add 'Back' Button for Touch TFT 320x240 ( #15060 )
2019-08-29 01:19:07 -05:00
Scott Lahteine
8196ced2de
Leave LCD_PINS_Dn defined for other uses
...
Fix #14998
2019-08-29 00:57:20 -05:00
AlexandrZloy
0ebaea94be
Add stallGuard threshold for X2 ( #15042 )
2019-08-29 00:15:31 -05:00
Scott Lahteine
e1d65b8937
[cron] Bump distribution date
2019-08-29 00:00:03 -05:00
Tanguy Pruvot
ca5da026d6
dogm: u8g prototypes cleanup ( #15082 )
2019-08-28 23:49:51 -05:00
Scott Lahteine
a61c91ae9e
Use 'bugfix' branch of U8glib-HAL
2019-08-28 21:39:18 -05:00
Scott Lahteine
1d8ad7cf71
Safe changes from HAL cleanup
2019-08-28 21:21:47 -05:00
Scott Lahteine
95963121b0
Patch a u8g include
2019-08-28 20:09:02 -05:00
Scott Lahteine
7b99c26e80
Fix FTDI_EVE_LIB platform includes
2019-08-28 19:56:02 -05:00
Scott Lahteine
3ac76f0489
Invariant Marlin bootscreen ( #15057 )
2019-08-28 07:40:18 -05:00
Scott Lahteine
b2a4b6f34e
Don't use board url as override
2019-08-28 04:44:40 -05:00
Scott Lahteine
b8e4b993d6
Separate board website URL
2019-08-28 04:44:40 -05:00
Scott Lahteine
6341aefda3
Info menu tweak style
2019-08-28 04:43:42 -05:00
Marcio Teixeira
0f386d06a1
Followup fixes to ExtUI ( #15068 )
2019-08-28 04:23:13 -05:00
Luu Lac
081e4506ca
Fix G53 as prefix, G28 with CNC_COORDINATE_SYSTEMS ( #15069 )
2019-08-28 04:20:28 -05:00
Robby Candra
ca084dcfe8
Switch col vs row variable name ( #15072 )
2019-08-28 02:49:21 -05:00
Giuliano Zaro
604bdf0b43
Update Italian language ( #15076 )
2019-08-28 02:46:21 -05:00
InsanityAutomation
b7796bcce6
Disable steppers on M112 ( #15065 )
...
And change verbiage to not refer to "Emergency Stop."
2019-08-28 00:51:01 -05:00
Scott Lahteine
318356b6bc
[cron] Bump distribution date
2019-08-26 00:00:07 -05:00
ETE-Design
9d12788a9a
ADIMLab Gantry - Spelling Correction ( #15043 )
2019-08-25 20:51:06 -05:00
InsanityAutomation
f218405c36
Fix ExtUI invalid speed, timer ( #15031 )
2019-08-25 04:46:02 -05:00
Daniel Callander
155765646e
Add warning when trying to use JD with kinematic systems ( #15032 )
2019-08-25 04:43:53 -05:00
Scott Lahteine
7183a586d9
Add EZBOARD PT100 pin
2019-08-25 04:31:00 -05:00
Scott Lahteine
c7825e6719
Contrast over 63 assume 255 max
...
This is closer to the prior behavior.
2019-08-25 04:31:00 -05:00
Tim Moore
1461ee4d36
Make LCD_CONTRAST_MAX >= _LCD_CONTRAST_INIT ( #15046 )
2019-08-25 04:25:07 -05:00
Scott Lahteine
9e9e578234
[cron] Bump distribution date
2019-08-25 00:00:03 -05:00
Tim Moore
8033bc87ea
Turbo-back Info menu items ( #15049 )
2019-08-24 19:50:04 -05:00
Scott Lahteine
d6a16525c2
New Language: Vietnamese ( #13892 )
2019-08-24 03:40:28 -05:00
Marcio Teixeira
da601d5114
Update USB_FLASH_DRIVE_SUPPORT ( #15021 )
2019-08-24 01:47:19 -05:00
Scott Lahteine
20fc66f875
ADIMLab Granty v1 / v2 ( #15017 )
...
* # This is a combination of 18 commits.
# This is the 1st commit message:
Add Support for ADIMLab Granty
# The commit message #2 will be skipped:
# Update Configuration.h
# The commit message #3 will be skipped:
# Add files via upload
#
# Add Support for ADIMLab Granty
# The commit message #4 will be skipped:
# Create Configuration.h
# The commit message #5 will be skipped:
# Delete Configuration.h
# The commit message #6 will be skipped:
# Create Test.h
# The commit message #7 will be skipped:
# Add files via upload
# The commit message #8 will be skipped:
# Delete Test.h
# The commit message #9 will be skipped:
# Delete Configuration.h
# The commit message #10 will be skipped:
# Delete Configuration_adv.h
# The commit message #11 will be skipped:
# Add files via upload
#
# Add ADIMLab Pins
# The commit message #12 will be skipped:
# Add files via upload
#
# Add Bootscreen
# The commit message #13 will be skipped:
# Update Configuration.h
#
# Add Bootscreen
# The commit message #14 will be skipped:
# Update pins.h
#
# Add ADIMLab Board
# The commit message #15 will be skipped:
# Update boards.h
#
# Add ADIMLab Granty
# The commit message #16 will be skipped:
# Update Makefile
#
# Add ADIMLab Granty
# The commit message #17 will be skipped:
# Update boards.h
# The commit message #18 will be skipped:
# Update Makefile
* Add Support for ADIMLab Granty
* Optimize bootscreen
* Update Makefile
Updated Description
* Update boards.h
Updated Description
* Update pins_HJC2560C_REV2.h
Updated Description
* Update Configuration.h
Added Author + Custom_Machine_Name
* Create _Bootscreen.h
Add Bootscreen
* Add files via upload
Add ADIMLab Granty v1
* Update boards.h
Add ADIMLab Granty v1
* Update Makefile
Add ADIMLab Granty v1
* Update pins_HJC2560C_REV2.h
* Consolidate Granty configs
* config updates
2019-08-24 01:45:11 -05:00
Scott Lahteine
750256948e
Apply #ifdef
2019-08-24 01:42:48 -05:00
BigTreeTech
848dd740ba
Fix STM32F1 ADC read temperature error ( #15026 )
...
…after USB CDC connect.
2019-08-24 01:33:16 -05:00
Scott Lahteine
04a9962cb5
Fix: Contrast override in pins files
...
Move contrast handling to `Conditionals_post.h` so pins files can override the LCD defaults.
2019-08-24 00:58:05 -05:00
Scott Lahteine
8c73017a69
[cron] Bump distribution date
2019-08-24 00:00:04 -05:00
Scott Lahteine
09ee5a5da1
Merge remote-tracking branch 'upstream/bugfix-2.0.x' into bf2_granty_fix_15017
2019-08-23 23:45:37 -05:00
Tim Moore
efeea9bccf
pca9632_buzz fix ( #15020 )
2019-08-23 22:30:11 -05:00
Marcio Teixeira
e61e54acfd
Fix TURBO_BACK_MENU_ITEM compile error ( #15019 )
2019-08-23 22:29:00 -05:00
Tanguy Pruvot
0a280f00c2
Flag unused variables without buzzer ( #15016 )
2019-08-23 22:21:30 -05:00
Scott Lahteine
f2ad1ceb13
Update PT-BR
2019-08-23 21:13:14 -05:00
ManuelMcLure
9c87786464
Change default Re-ARM UART pin order ( #15037 )
2019-08-23 20:55:41 -05:00
Scott Lahteine
fdef32ce77
Shorten Website URLs
2019-08-22 19:37:04 -05:00
Scott Lahteine
7924e0d819
Add print at position shortcuts
2019-08-22 19:37:04 -05:00
Scott Lahteine
5c0e5c599f
Fix boot screen warning
2019-08-22 18:58:11 -05:00
Scott Lahteine
dd6efe96e7
Restore documented M503 behavior
2019-08-22 18:58:11 -05:00
Scott Lahteine
6429b8bfb8
Fix EZBoard platform test
2019-08-22 17:38:32 -05:00
Tanguy Pruvot
e604f76703
Enable contrast via LCD_CONTRAST_INIT ( #15006 )
2019-08-21 18:56:39 -05:00
ETE-Design
9d8e3d4d6f
Update pins_HJC2560C_REV2.h
2019-08-21 17:38:08 +02:00
ETE-Design
d858f44b35
Update boards.h
...
Add ADIMLab Granty v1
2019-08-21 17:34:44 +02:00
ETE-Design
0309a5f3af
Update pins_HJC2560C_REV2.h
...
Updated Description
2019-08-21 16:30:08 +02:00
ETE-Design
9434b81a82
Update boards.h
...
Updated Description
2019-08-21 16:27:45 +02:00
Tanguy Pruvot
012f577bb0
STM32F1: Import (rogerclarkmelbourne) SPI class ( #15002 )
2019-08-21 06:22:23 -05:00
ETE-Design
4be98221f6
ADIMLab Granty pins/config ( #14919 )
2019-08-21 05:33:17 -05:00
Scott Lahteine
f7aac7a5b0
Add Support for ADIMLab Granty
2019-08-21 05:26:38 -05:00
ETE-Design
de122c9bbe
# This is a combination of 18 commits.
...
# This is the 1st commit message:
Add Support for ADIMLab Granty
# The commit message #2 will be skipped:
# Update Configuration.h
# The commit message #3 will be skipped:
# Add files via upload
#
# Add Support for ADIMLab Granty
# The commit message #4 will be skipped:
# Create Configuration.h
# The commit message #5 will be skipped:
# Delete Configuration.h
# The commit message #6 will be skipped:
# Create Test.h
# The commit message #7 will be skipped:
# Add files via upload
# The commit message #8 will be skipped:
# Delete Test.h
# The commit message #9 will be skipped:
# Delete Configuration.h
# The commit message #10 will be skipped:
# Delete Configuration_adv.h
# The commit message #11 will be skipped:
# Add files via upload
#
# Add ADIMLab Pins
# The commit message #12 will be skipped:
# Add files via upload
#
# Add Bootscreen
# The commit message #13 will be skipped:
# Update Configuration.h
#
# Add Bootscreen
# The commit message #14 will be skipped:
# Update pins.h
#
# Add ADIMLab Board
# The commit message #15 will be skipped:
# Update boards.h
#
# Add ADIMLab Granty
# The commit message #16 will be skipped:
# Update Makefile
#
# Add ADIMLab Granty
# The commit message #17 will be skipped:
# Update boards.h
# The commit message #18 will be skipped:
# Update Makefile
2019-08-21 05:25:00 -05:00
Scott Lahteine
4581957d93
Clean up some pins
2019-08-21 05:15:48 -05:00
Marcio Teixeira
bd1ced14e7
LulzBot Touch UI Followup ( #15007 )
2019-08-21 04:48:05 -05:00
Marcio Teixeira
69641f1420
Fix incompatible types error ( #15009 )
2019-08-21 04:15:37 -05:00
Marcio Teixeira
825c2c3dc4
Fix fan speed encoder scaling ( #15010 )
2019-08-21 03:49:43 -05:00
Scott Lahteine
f1942f6ec0
[cron] Bump distribution date
2019-08-21 00:00:04 -05:00
Scott Lahteine
5e777601f3
Add TURBO_BACK_MENU_ITEM option ( #14991 )
2019-08-20 19:37:03 -05:00
Scott Lahteine
0cc524b84f
Prevent BOARD_NAME conflict with env
2019-08-20 19:10:36 -05:00
InsanityAutomation
33f6d77281
Adjust homing backoff feedrate ( #14972 )
2019-08-20 03:44:52 -05:00
InsanityAutomation
5a7c0216f7
Misc. ExtUI fixes ( #14971 )
2019-08-20 03:44:17 -05:00
InsanityAutomation
6039893981
Creality pins updates ( #14979 )
2019-08-20 03:42:30 -05:00
MaukCC
8664b8e97b
Adding HMS434 machine ( #14931 )
2019-08-20 03:40:48 -05:00
Scott Lahteine
5c6e82743e
Followup to STM32F407
2019-08-20 03:11:34 -05:00
chzj333
0b47558a09
New board STM32F407 ( #14994 )
2019-08-20 03:05:12 -05:00
Tim Moore
67f8ba6fed
Allow pullup/downs on power loss pin ( #14986 )
2019-08-20 02:40:44 -05:00
thisiskeithb
19e21a8f10
Wanhao Duplicator i3 Mini config updates ( #14908 )
2019-08-20 02:38:31 -05:00
Ludy
05995d1fd6
Unify buzz methods as MarlinUI::buzz ( #14803 )
2019-08-20 02:01:37 -05:00
Scott Lahteine
29c12905f5
Minor HAL patches
2019-08-19 02:28:36 -05:00
Scott Lahteine
94397dbdb4
[cron] Bump distribution date
2019-08-19 00:00:07 -05:00
Scott Lahteine
17cd1a4f26
Tweak TOUCH_MI_DEPLOY_XPOS block
2019-08-18 23:38:12 -05:00
Scott Lahteine
dfcd437486
Base HAS_LCD_CONTRAST on display type
2019-08-18 23:38:12 -05:00
Scott Lahteine
3f678b0be5
Remove some extra F4 conditions
2019-08-18 23:37:25 -05:00
Scott Lahteine
4d1a662571
Fix STM32F7 STEPPER_ENABLE_PIN
2019-08-18 23:25:15 -05:00
Tim Moore
cd09e35f90
Remove extra M503 "M412" report ( #14985 )
2019-08-18 21:17:00 -05:00
InsanityAutomation
c5be59ddfe
Fix runout trigger on "inactive" sensor ( #14990 )
2019-08-18 21:11:33 -05:00
InsanityAutomation
af5a7a2925
Add missing ExtUI user confirmation ( #14992 )
2019-08-18 21:03:26 -05:00
Robby Candra
33d54c0d5a
Remove extra defines ( #14983 )
2019-08-18 21:00:20 -05:00
Scott Lahteine
9a3ee3be53
[cron] Bump distribution date
2019-08-18 00:00:04 -05:00
Scott Lahteine
9d9e2deb9b
Tweak UBL G29 status print
2019-08-17 20:15:10 -05:00
Robby Candra
823178c272
Use u8g int type for screen coordinates ( #14965 )
2019-08-17 19:58:38 -05:00
Ludy
6715fd159c
Animated Marlin boot screen ( #14961 )
2019-08-17 18:40:01 -05:00
Scott Lahteine
9e49f154d8
[cron] Bump distribution date
2019-08-17 15:47:17 -05:00
Marcio Teixeira
8bdb3d9970
Add CONTROLLERFAN_SPEED_Z_ONLY ( #14956 )
2019-08-16 21:57:19 -05:00
AnHardt
587d4a6373
Repair display throttling ( #14960 )
2019-08-16 21:17:09 -05:00
J.C. Nelson
fecf808d80
Fix lambda missing capture ( #14969 )
2019-08-16 21:15:27 -05:00
Bob Kuhn
66bfad3ced
Fix missing U8glib.h include ( #14966 )
2019-08-16 20:06:32 -05:00
J.C. Nelson
1bcc5c98a9
MalyanLCD: Pause, resume, more ExtUI ( #14852 )
2019-08-16 20:02:35 -05:00
Scott Lahteine
c3ff53a61c
STM32 u8g defines
...
Suggested by https://github.com/MarlinFirmware/Marlin/issues/14742#issuecomment-515753814
2019-08-16 18:48:29 -05:00
Tim Moore
4575978a1f
Fix auto power for chamber fan ( #14922 )
2019-08-16 18:42:24 -05:00
Marcio Teixeira
274934ad81
Add LULZBOT_TOUCH_UI ( #14967 )
2019-08-16 18:34:13 -05:00
Marcio Teixeira
179d6c4ed1
Add STARTUP_SCRIPT option. M17 parity with M18. ( #14953 )
2019-08-14 21:05:15 -05:00
Marcio Teixeira
36dfbaea8c
Add missing function declaration ( #14955 )
2019-08-14 17:52:57 -05:00
Marcio Teixeira
263d7d37af
"SD card" => "Media" ( #14951 )
2019-08-14 17:52:14 -05:00
Scott Lahteine
24ce8beb48
[cron] Bump distribution date
2019-08-14 00:00:11 -05:00
Tanguy Pruvot
4cc103958e
Alfawise Flash EEPROM, Z Servo Probe ( #14877 )
2019-08-13 23:41:17 -05:00
Joseph Bozarth
0fbb26c28f
M16 - Expected Printer Check ( #14924 )
2019-08-13 23:38:45 -05:00
Scott Lahteine
a26b57a36d
Minor pins cleanup
2019-08-13 19:40:08 -05:00
Acenotass
059f575d93
Update Russian language ( #14940 )
2019-08-13 19:19:44 -05:00
Timothy Hoogland
a67830bf67
TH3D EZBoard is LPC1769 ( #14936 )
2019-08-13 00:03:42 -05:00
Tanguy Pruvot
c6be989fca
Store EEPROM config in flash ( #14923 )
...
Avoid confusion between the 2 possible SDs...
2019-08-12 19:48:46 -05:00
Marcio Teixeira
13d8dc0b79
Fix incorrect print stat in ExtUI ( #14881 )
2019-08-10 19:25:30 -05:00
Marcio Teixeira
dc21e2e691
Increase XY nozzle offset range ( #14882 )
2019-08-10 19:24:41 -05:00
Marcio Teixeira
fa533846a7
Bury easter egg deeper ( #14883 )
2019-08-10 19:23:37 -05:00
Giuliano Zaro
af4bcb629a
SAMD51 typo fix ( #14885 )
2019-08-10 19:22:48 -05:00
Ludy
d7172a4558
Cleanup and conditions ( #14886 )
2019-08-10 19:22:18 -05:00
Johnny Eshak
03dbe16ccc
Compiling M43 on invalid conversion ( #14897 )
2019-08-10 19:20:40 -05:00
Giuliano Zaro
f085199f5b
SAMD51: Some LCD pin fixes ( #14915 )
2019-08-10 19:19:52 -05:00
Giuliano Zaro
d78086ccdc
SAMD51: Neopixel pin mapping ( #14913 )
2019-08-10 19:18:32 -05:00
Eric Ptak
9c5086e6af
[STM32F1] Simpler Flash EEPROM ( #14829 )
2019-08-10 19:14:31 -05:00
Tanguy Pruvot
0745d48993
Fix build with and without TOUCH_BUTTONS ( #14912 )
2019-08-10 18:22:11 -05:00
Tanguy Pruvot
5d2519ed50
Allow use of Fysetc SoftwareSerialM ( #14893 )
2019-08-10 01:45:36 -05:00
Robby Candra
d2d71caa3b
Clean up Touch pins. Better up/down touch response. ( #14900 )
2019-08-10 01:42:52 -05:00
Tanguy Pruvot
8cc0b4bf5e
Revert "Edit STEPS_PER_MM integer only" ( #14909 )
...
This reverts commit 2d98bb39bd
2019-08-10 00:58:21 -05:00
Giuliano Zaro
3129fd06f0
SAMD51: Update LCD pins ( #14907 )
2019-08-10 00:56:55 -05:00
Ludy
9479ec32f7
Fix Service Menu compile error ( #14903 )
2019-08-10 00:53:26 -05:00
Giuliano Zaro
a7f1021265
Fix SPI_ENDSTOPS compile error ( #14906 )
2019-08-09 17:00:20 -05:00
Chris Pepper
2971b48a12
Use PlatformIO 4 default dir structure ( #14879 )
2019-08-08 08:29:33 -05:00
Scott Lahteine
9624c90cfb
Remove HAL.h dependency in SoftwareSerial.h
2019-08-08 07:43:57 -05:00
Scott Lahteine
a6f682d860
[cron] Bump distribution date
2019-08-08 06:39:53 -05:00
Fourmi
eb3a3d249e
Fix TouchMI probe movement (left side) ( #14875 )
2019-08-08 02:40:48 -05:00
Tanguy Pruvot
535018ef0e
STM32F1: Dummy SoftwareSerial (as TMCStepper fallback) ( #14861 )
2019-08-08 02:25:52 -05:00
Ludy
528c9885f2
Fix wait_for_user + PAUSE_BEFORE_DEPLOY_STOW issue ( #14831 )
2019-08-08 01:52:20 -05:00
Scott Lahteine
c8e30b6639
Fix code attempting to sprintf %f ( #14869 )
...
Arduino doesn't (always) support `float` formatting in strings. So either cast to `int` or use `dtostrf()` to fix these usages.
2019-08-08 01:51:37 -05:00
Tanguy Pruvot
92c35d14a4
Non-fatal error from ps::access_start ( #14845 )
2019-08-07 00:43:00 -05:00
Tim Moore
77f637763c
Overlord configs. Fix buzzer, redundant temp. ( #14833 )
2019-08-06 23:25:47 -05:00
Giuliano Zaro
535eeace5f
Fix Bed, Chamber ADC condition ( #14866 )
2019-08-06 22:57:54 -05:00
Acenotass
3914bcfbb1
Russian correction ( #14862 )
2019-08-06 22:56:51 -05:00
Tim Moore
0fa7d86918
Fix thermistor names (info menu) ( #14860 )
2019-08-06 22:54:18 -05:00
Tanguy Pruvot
eecfcd124d
Finish STM32F4 SD-based settings storage ( #14844 )
2019-08-06 22:53:11 -05:00
Scott Lahteine
a0d782e46e
STM32F7xx is gone
2019-08-06 04:58:58 -05:00
Scott Lahteine
fd9f067a48
Robin FSMC / SPI pins
2019-08-06 04:57:49 -05:00
Scott Lahteine
579e4396e2
Reduce STM32_F4_F7 pin warnings
2019-08-06 04:57:15 -05:00
Scott Lahteine
fb579212ea
Reduce unused function warnings
2019-08-06 04:56:17 -05:00
Scott Lahteine
fc39c925ca
Grace period followup
2019-08-05 22:00:49 -05:00
Scott Lahteine
a9c5d524bb
Followup to MAX7219 / KILL_PIN patch
...
Co-Authored-By: Roxy-3D <roxy-3d@users.noreply.github.com>
2019-08-05 21:42:33 -05:00
Chris Pepper
f499cecf0d
Marlin Binary Protocol Mark II ( #14817 )
2019-08-05 20:41:53 -05:00
Robby Candra
5bc2fb022c
THERMAL_PROTECTION_GRACE_PERIOD is obsolete ( #14798 )
2019-08-05 20:33:15 -05:00
Jason Smith
534c105a7a
Fix 16-bit range check in TMenuItem::action_edit ( #14834 )
2019-08-05 20:02:29 -05:00
Acenotass
4af9908764
Update M48 command in the status line ( #14816 )
2019-08-05 20:01:40 -05:00
Scott Lahteine
8f0aedeead
Reorder some language defines
2019-08-05 19:12:00 -05:00
Roxy-3D
6fdb0bec07
Resolve Kill pin & Max7219 Clock conflict on TREX-2+
2019-08-05 14:36:50 -05:00
teemuatlut
d4974ea719
TMC SPI Endstops and Improved Sensorless Homing ( #14044 )
2019-08-04 22:22:58 -05:00
Giuliano Zaro
d493cafc4a
Fix a memset pointer cast ( #14823 )
2019-08-04 22:06:36 -05:00
Scott Lahteine
4e58f9387a
Onboard SD for MKS Robin
...
In response to #9771
2019-08-04 21:17:45 -05:00
Scott Lahteine
2d98bb39bd
Edit STEPS_PER_MM integer only
2019-08-04 19:39:52 -05:00
Tim Moore
e3660bca25
Overlord printer thermistor ( #14815 )
2019-08-03 20:57:56 -05:00
George Fu
f89eb8bf35
Fysetc Cheetah updates ( #14800 )
2019-08-03 18:12:35 -05:00
Tanguy Pruvot
4bd1e55093
STM32F1: Init EEPROM SPI pin modes ( #14810 )
2019-08-03 18:11:06 -05:00
Scott Lahteine
52a7a8cb26
Fix HOST_PROMPT_SUPPORT without LCD
2019-08-02 11:35:04 -05:00
Scott Lahteine
18c9182903
Match up write_data signatures
2019-08-02 11:09:07 -05:00
Scott Lahteine
2e27e3ba04
Patch up Teensy 3.1/3.2 pins, tests
2019-08-02 10:01:55 -05:00
Ludy
337361d588
Update German language, (c) ( #14804 )
2019-08-02 09:21:28 -05:00
Scott Lahteine
8119e511a1
Patch some (c) messages
2019-08-02 07:47:33 -05:00
yangwenxiong
6132cf900b
STM32F4x SD-based settings storage ( #14808 )
2019-08-02 07:40:27 -05:00
Giuliano Zaro
21993b75f4
SAMD51 Servo class ( #14781 )
2019-08-02 07:37:41 -05:00
Scott Lahteine
e85eca2630
HAL cleanup, Teensy 3.1 platform
2019-08-02 07:22:26 -05:00
Tim Moore
940c59d9da
Overlord i2c LCD with LEDs and buzzer ( #14801 )
2019-08-02 06:19:45 -05:00
Scott Lahteine
e1942715ce
HAL_STM32F1_EEPROM_SIZE => HAL_EEPROM_SIZE
2019-08-02 06:18:36 -05:00
Scott Lahteine
ee5e46b46b
Patch PrintJobRecovery::filename
2019-08-02 05:21:55 -05:00
Scott Lahteine
fd945d1070
More generic EEPROM data array name
2019-08-02 04:40:34 -05:00
Tanguy Pruvot
3334163e73
STM32F1: Align SD EEPROM data for SDIO ( #14809 )
2019-08-02 04:12:46 -05:00
Scott Lahteine
70ce4f5b36
Move job recovery filename
2019-08-02 02:24:15 -05:00
Scott Lahteine
9ac348ef7b
SDPOWER => SDPOWER_PIN
2019-08-02 02:24:15 -05:00
Scott Lahteine
5e2582a31b
Comment spacing
2019-08-02 02:24:15 -05:00
mekius
7682751646
Fix HOME_BACKOFF_MM type ( #14805 )
2019-08-01 20:32:45 -05:00
Robby Candra
96a1c6540e
Use title case for menu items ( #14806 )
2019-08-01 20:31:58 -05:00
InsanityAutomation
f59a7e8b07
Print/display ABL current probe point ( #14788 )
2019-08-01 20:11:26 -05:00
Tim Moore
3765e67434
Dreammaker Overlord pins ( #14791 )
2019-07-31 21:15:36 -05:00
InsanityAutomation
6f8b8c394d
Homing backoff per-axis / delta Z ( #14789 )
2019-07-31 20:50:23 -05:00
Benjamin Reed
0c035c0a7a
Fix 'pause_menu_response' compile error ( #14792 )
2019-07-31 17:21:25 -05:00
Tanguy Pruvot
3db1a80b4c
Update French language ( #14787 )
2019-07-31 17:10:14 -05:00
Scott Lahteine
c2b319360d
Remove extra pragmas
2019-07-30 20:19:47 -05:00
Tanguy Pruvot
202d3ab3c9
Define STM32F1 GPIO for the preprocessor ( #14785 )
2019-07-30 18:58:03 -05:00
Eric Ptak
fdbc733376
Return 'false' on EEPROM connection fail ( #14776 )
2019-07-30 17:43:45 -05:00
Robby Candra
128eed6b57
Option to reverse select direction/buttons ( #14693 )
2019-07-30 17:42:57 -05:00
Gustavo Alvarez
27952648cf
Fix M122 column alignment ( #14779 )
2019-07-30 17:11:17 -05:00
Giuliano Zaro
eb08aeab7d
Update Italian language ( #14782 )
2019-07-30 17:09:01 -05:00
pinchies
d98b9d54f1
JGAurora A5S & A1 touch support ( #14768 )
2019-07-30 17:08:11 -05:00
Scott Lahteine
c1b99c43b6
[cron] Bump distribution date
2019-07-30 05:07:39 -05:00
InsanityAutomation
0b154c2d71
Enable runout sensor in EEPROM by default ( #14771 )
2019-07-30 05:01:56 -05:00
Scott Lahteine
bc58e678bd
More general FSMC display option
2019-07-30 04:25:55 -05:00
Acenotass
659d06d9b9
M48 menu item, result to status ( #14772 )
2019-07-30 02:31:14 -05:00
rafaljot
e44fccf3d2
Add support for M575 ( #14757 )
2019-07-30 02:30:00 -05:00
MarcelMo
f8aa52346f
Configurable Z move distance ( #14593 )
2019-07-30 02:16:26 -05:00
Scott Lahteine
842466f4d9
Mixer patch, etc.
2019-07-29 22:20:28 -05:00
Scott Lahteine
1165c26ab4
Trailing whitespace
2019-07-29 19:46:54 -05:00
Scott Lahteine
eae543adf3
Apply HAS_SPI_LCD as needed
2019-07-29 18:55:05 -05:00
Scott Lahteine
8837cd3b53
[cron] Bump distribution date
2019-07-29 18:46:40 -05:00
Marcio Teixeira
eb7840dabb
Match select item to encoder direction ( #14673 )
2019-07-29 00:02:42 -05:00
Scott Lahteine
e5d73f68c8
HAL folder organization ( #14763 )
2019-07-28 23:55:24 -05:00
Marcio Teixeira
eefe3f595a
New options: Bootscreen as Info, game Easter-egg ( #13829 )
2019-07-28 22:47:20 -05:00
Scott Lahteine
180f9a4c22
Remove obsolete info menu includes
2019-07-28 20:20:33 -05:00
Ludy
c4bb458763
BUZZ cleanup ( #14760 )
2019-07-28 19:14:50 -05:00
mikeshub
1579091c20
PID loop improvements ( #14746 )
...
* Fix macro evaluation in `temperature.cpp`
* Improve bed PID, PID debug output
* Add min PID power define
2019-07-28 15:50:25 -05:00
thisiskeithb
e8e81d3609
Fix MKS Robin Lite pins include ( #14755 )
2019-07-28 14:56:05 -05:00
Giuliano Zaro
290466578f
Adafruit Grand Central M4 ( #14749 )
2019-07-28 14:48:29 -05:00
Marcio Teixeira
fec52e61ea
Use shared memory space for game data ( #14727 )
2019-07-28 01:44:16 -05:00
Scott Lahteine
17abb94532
Whitespace patch
2019-07-28 01:29:23 -05:00
Ludy
97e9c95f47
Fix & clean up ExtUI ( #14748 )
2019-07-27 22:44:05 -05:00
Eric Ptak
59e97e5e52
FYSETC Cheetah 1.2 ( #14723 )
2019-07-27 21:21:54 -05:00
InsanityAutomation
2351592abf
Overridable TMC serial pins, update TMC2209 docs ( #14751 )
2019-07-27 20:34:22 -05:00
thisiskeithb
d74efd9d46
MKS Robin Lite/Lite2 Board Support ( #14729 )
2019-07-27 04:43:37 -05:00
Marcio Teixeira
1c3df51f87
vsnprintf patch redux ( #14725 )
2019-07-27 04:34:49 -05:00
Bo Herrmannsen
bf610d87f7
Fix a bad MKS SGen-L pin ( #14735 )
2019-07-27 04:18:49 -05:00
Fourmi
d34364a086
Default TOUCH_MI_DEPLOY_XPOS to min X ( #14736 )
2019-07-26 21:57:13 -05:00
Ludy
ead6bb267d
Add Z3 SanityCheck, revert early sanity change ( #14717 )
2019-07-24 22:32:49 -05:00
Scott Lahteine
a3dc1e461b
Update M7219 comment, tweak parameter code
2019-07-24 21:09:51 -05:00
Chris Pepper
b6095fd084
Reduce default LPC176x ADC lowpass filtering
2019-07-25 00:40:51 +01:00
Scott Lahteine
1088846cae
Cosmetic updates from 14044
2019-07-24 01:52:36 -05:00
Scott Lahteine
05f4033a34
Prevent a name conflict in u8g impl file
2019-07-24 01:01:03 -05:00
Marcio Teixeira
585a8a96b4
Fix extraneous redefine of vsnprintf_P in Marduino.h ( #14712 )
2019-07-23 17:18:53 -05:00
Giuliano Zaro
7085781c71
Include configs in serial.h ( #14714 )
2019-07-23 16:40:54 -05:00
Marcio Teixeira
369fb2806d
Fix compilation warnings, errors ( #14704 )
2019-07-22 20:08:54 -05:00
Scott Lahteine
a589456a14
Tweak mark/range/quantity conditions
2019-07-22 07:16:42 -05:00
Scott Lahteine
601b2d9f51
Send slightly less data to Max7219
2019-07-22 07:16:42 -05:00
Scott Lahteine
79f49040f1
Patch some Max7219 comments
2019-07-22 07:14:07 -05:00
Scott Lahteine
5c3ec6306f
Max7219 side-by-side arrangement ( #14702 )
2019-07-22 05:22:21 -05:00
Scott Lahteine
a7c41d28af
Max7219 non-functional tweaks
2019-07-22 04:24:16 -05:00
Giuliano Zaro
1005f225f3
Remove unused defines, fix typo ( #14699 )
2019-07-21 21:44:03 -05:00
mikeshub
d9303b2137
Fix MAX6675_SEPARATE_SPI boot loop ( #14698 )
2019-07-21 21:36:00 -05:00
Scott Lahteine
f96d2a5b4a
Update pins_STEVAL.h
2019-07-21 21:25:14 -05:00
Tanguy Pruvot
dca0c3d02a
Fix SPI comments, clean up U20 pins ( #14700 )
2019-07-21 20:23:41 -05:00
Scott Lahteine
7501e40e0b
APB comment correction
2019-07-21 20:13:36 -05:00
InsanityAutomation
dc6fa04f68
Fix single nozzle temp change, do slower extra prime ( #14696 )
2019-07-21 19:33:37 -05:00
Tim Moore
e5aa453293
Add support for 2 Neopixel strips ( #14667 )
2019-07-20 23:14:09 -05:00
BigTreeTech
a38b9da672
STM32F1 SPI1 bugfix ( #14679 )
2019-07-20 20:35:41 -05:00
Scott Lahteine
93adb7e944
Some comment patches
2019-07-20 16:46:59 -05:00
InsanityAutomation
9cd66f6f77
Fix missing include & condition ( #14682 )
2019-07-20 01:55:34 -05:00
Tanguy Pruvot
977cfa4494
Fix a few recent (STM32F1 DOGM, SPI) warnings ( #14669 )
2019-07-20 01:54:01 -05:00
Ludy
39e1726498
Comments, includes ( #14671 )
2019-07-20 01:41:34 -05:00
Ludy
b714cfd4f0
MKS GEN v1.3/1.4 undef STAT_LED_*_PIN ( #14644 )
2019-07-19 06:12:57 -05:00
wookie666
00e2f6da8f
Improve magnetic dock switching toolhead ( #14663 )
2019-07-19 06:07:26 -05:00
Robby Candra
71d8c6f742
Fix LCD sanity check ( #14678 )
2019-07-19 05:53:36 -05:00
Scott Lahteine
fd2bc3a212
[cron] Bump distribution date
2019-07-19 00:00:09 -05:00
Scott Lahteine
4cc83b6330
Allow THERMAL_PROTECTION_GRACE_PERIOD override
...
Co-Authored-By: MarcelMo <marcelmo@users.noreply.github.com>
2019-07-18 23:38:03 -05:00
Scott Lahteine
1ea9a36d11
FYSETC BLTouch config and more ( #14668 )
2019-07-18 05:54:50 -05:00
Scott Lahteine
92e513e76e
Trailing whitespace
2019-07-18 05:51:36 -05:00
Msq001
6920b7fe91
BigTreeTech SKR E3 DIP ( #14638 )
2019-07-18 05:43:49 -05:00
Karl Andersson
d472934a70
FYSETC Mini 12864 for HAL_STM32 ( #14639 )
2019-07-18 05:42:16 -05:00
Scott Lahteine
ec13aa0dc1
Misc. whitespace
2019-07-18 05:13:55 -05:00
Scott Lahteine
3d153486da
Fysetc rename Part 2
2019-07-18 04:36:08 -05:00
Scott Lahteine
68108789d0
Add'l toolchange syncs
2019-07-18 02:44:21 -05:00
Scott Lahteine
fac0e63058
Clean up tool-change syncs ( #14666 )
2019-07-18 02:17:46 -05:00
Scott Lahteine
42b5ccafc9
Toss obsolete DEBUG_LEVELING_FEATURE tests
2019-07-17 20:26:48 -05:00
Marcio Teixeira
ca4d6f4470
Fix compile error (bad return type) ( #14660 )
2019-07-17 19:49:26 -05:00
thisiskeithb
522df57a45
Tevo Michelangelo configuration ( #14577 )
2019-07-17 19:47:14 -05:00
Robby Candra
c9aa68ef7a
Encoder direction: Wrangle, Revert select screen change ( #14628 )
2019-07-17 19:41:15 -05:00
Marcio Teixeira
839255eed4
Fix for M504 changing filament runout value ( #14661 )
...
Fixes #14476
2019-07-17 19:11:45 -05:00
Scott Lahteine
305f277843
Drop old includes in serial.h
2019-07-17 05:49:20 -05:00
Tanguy Pruvot
9dfa5ba3a5
XPT2046: Handle MKS touchscreen w/out PenIRQ pin ( #14640 )
2019-07-17 04:41:10 -05:00
Jason Smith
f2c5740d06
Add 'E' argument to G34 to allow stowing between probes ( #14533 )
...
- Use the return value from probe_pt during `G34`
Eliminate the assumption that probe_pt leaves current_position set to values relative to the probed points. This is not always true, depending on the raise_after argument.
- Add '`E`' argument to `G34` command allowing stowing between each probe.
2019-07-17 04:23:19 -05:00
Robby Candra
2c5436e315
Fix HOST_PROMPT_SUPPORT include in ExtUI API ( #14650 )
2019-07-17 04:23:19 -05:00
InsanityAutomation
b8cc61262f
Finish G12, update Nozzle::clean ( #14642 )
2019-07-17 04:23:19 -05:00
Marcio Teixeira
57ed063ba1
Fix unused variable warnings ( #14643 )
2019-07-17 03:16:10 -05:00
Scott Lahteine
06324df072
Apply some #ifndef
2019-07-17 03:14:44 -05:00
Marcio Teixeira
27c487bab7
Print progress enhancements ( #14647 )
2019-07-17 03:14:44 -05:00
Robby Candra
ebb1a7dc1f
Fix EXT_UI example onFilamentChange Parameter ( #14649 )
2019-07-17 03:05:23 -05:00
Scott Lahteine
5ccf8c2c33
Fix serial.h indents
2019-07-17 02:03:25 -05:00
Scott Lahteine
ef2a2eb984
Temp tweak
2019-07-17 02:03:25 -05:00
Ludy
abc9b52692
Update copyright in header, etc. ( #14645 )
2019-07-16 22:42:36 -05:00
Scott Lahteine
5535a047d7
[cron] Bump distribution date
2019-07-16 00:00:08 -05:00
Tanguy Pruvot
bae8d0a4bd
DOGM: Avoid white flash on TFT (re)init ( #14631 )
...
- Avoid white flash on TFT (re)init. Unlike Graphical LCD, the TFT init color may be full white if the backlight is on during init.
- Add a conditional for delayed backlight init which can be applied to any backlit display.
2019-07-15 17:36:16 -05:00
Scott Lahteine
93bc1b17f9
[cron] Bump distribution date
2019-07-15 00:00:08 -05:00
Simon Jouet
f0de56a797
ESP32 HAL - Dynamic ADC attenuation ( #14623 )
2019-07-14 23:32:48 -05:00
Tanguy Pruvot
81d629bc47
Robin & Longer3D SPI TFT driver ( #14595 )
2019-07-14 18:16:26 -05:00
Tanguy Pruvot
45bde333d5
Initial Longer3D LK1/2 (Alfawise U20/U20+/U30) support ( #14597 )
2019-07-14 18:05:24 -05:00
Jeonghwan Noh
475ccfad62
Oscar (by Thinknthings of Korea) board support ( #14574 )
2019-07-14 15:36:03 -05:00
Scott Lahteine
fdaa374490
Clean up pins self-checks
2019-07-14 15:34:14 -05:00
Scott Lahteine
77b4f23edc
Update pins comments
2019-07-14 15:19:22 -05:00
Scott Lahteine
d4be970c8b
Update DOGLCD conditions
2019-07-14 13:10:13 -05:00
Scott Lahteine
2d84bcb4cd
Simplify, update LCD sanity-check
2019-07-14 13:09:16 -05:00
Scott Lahteine
eaf1c0954e
Update some precompiler tests
2019-07-14 13:09:16 -05:00
InsanityAutomation
ce02c6cee2
Variable tool change purge ( #14618 )
2019-07-14 11:40:58 -05:00
Marcio Teixeira
cbe4bf2ba8
Fix process_injected_command undefined behavior ( #14602 )
2019-07-14 10:12:48 -05:00
Ringel
e139c1d9d9
Fix ESP32 i2s stream, add PWM to extended pins ( #14592 )
2019-07-14 10:08:14 -05:00
Marcio Teixeira
a49478cefa
Fix STATUS_MESSAGE_SCROLLING in LIGHTWEIGHT_UI ( #14603 )
2019-07-14 09:39:03 -05:00
InsanityAutomation
d2f20803ba
Allow nozzle clean with limited Axis ( #14619 )
2019-07-14 06:58:53 -05:00
Ludy
6dcb85927a
Update German language, &c. ( #14613 )
2019-07-14 04:34:55 -05:00
Robby Candra
e96468566d
Fix Z_PROBE_END_SCRIPT in ABL ( #14621 )
2019-07-14 04:28:38 -05:00
Scott Lahteine
a85cd042d8
[cron] Bump distribution date
2019-07-14 00:00:09 -05:00
Scott Lahteine
91bb0f5439
[cron] Bump distribution date
2019-07-13 00:00:09 -05:00
Scott Lahteine
b2b7c583eb
Pins cleanup
2019-07-12 23:07:52 -05:00
Karl Andersson
82cafc9b19
pins_ARMED overrides STM32 defines ( #14587 )
2019-07-12 06:06:04 -05:00
Scott Lahteine
d3add3c34f
Init servo macro, j/b
2019-07-12 04:53:50 -05:00
InsanityAutomation
f1eaed7e98
Only init servo pins used for servos ( #14589 )
2019-07-12 04:30:15 -05:00
scotthsl
19b24a349c
Fix M412 without HOST_ACTION_COMMANDS ( #14591 )
2019-07-12 04:23:33 -05:00
Scott Lahteine
89964ec30d
[cron] Bump distribution date
2019-07-12 00:00:08 -05:00
Giuliano Zaro
cd36809c06
Fix STM32F7 compile error ( #14583 )
2019-07-11 15:23:53 -05:00
Scott Lahteine
3cd9a92dcc
Use REVERSE_ENCODER_DIRECTION in do_select_screen
2019-07-11 15:17:26 -05:00
Scott Lahteine
80c6f98d2f
Fix nested _draw_chamber_status
...
Co-Authored-By: alexscarbro <alexscarbro@users.noreply.github.com>
2019-07-11 14:51:26 -05:00
Scott Lahteine
b0d8ba3894
Fix ANIM_CHAMBER
...
Co-Authored-By: alexscarbro <alexscarbro@users.noreply.github.com>
2019-07-11 14:36:02 -05:00
Ludy
70586d3a6c
Update (c) comments ( #14584 )
2019-07-11 13:48:15 -05:00
Pavel4e5
8babf55b18
Init ADC keypad analog input ( #14585 )
2019-07-11 13:47:41 -05:00
Scott Lahteine
948c3f580b
Clean up some LCD conditions
2019-07-11 06:11:19 -05:00
Scott Lahteine
179095c387
Pins cleanup
2019-07-11 05:29:24 -05:00
thisiskeithb
42be684e69
Wanhao Duplicator i3 Mini support ( #14559 )
2019-07-11 04:36:51 -05:00
Scott Lahteine
340d827dc1
Fix mega/ subfolder pins
...
Followup to #14573
2019-07-11 02:59:02 -05:00
Scott Lahteine
7de605c5c3
Move pins files to subfolders #14573
2019-07-11 02:32:24 -05:00
Scott Lahteine
e5a5273edb
[cron] Bump distribution date
2019-07-11 00:00:10 -05:00
Scott Lahteine
98c6c6f1aa
Combine STM32F4 and STM32F7 ( #14566 )
...
* Serial assert (needs work)
* Bring STM32F4/F7 together
* Tweaks to STM32 headers
* More general 'stm32_timer_t'
* Move vsnprintf_P to Marduino.h
2019-07-10 22:05:34 -05:00
Giuliano Zaro
caa87d5fe1
SD2Card cleanup ( #14571 )
2019-07-10 22:04:16 -05:00
Scott Lahteine
ad1c061e7b
Bring STM32F4/F7 together
2019-07-10 07:07:04 -05:00
Scott Lahteine
4e479caf61
Fix mis-use of LIMIT
2019-07-10 07:07:04 -05:00
Scott Lahteine
cf9ac4c847
Move vsnprintf_P to Marduino.h
2019-07-10 07:07:04 -05:00
Scott Lahteine
f7de453da8
More general 'stm32_timer_t'
2019-07-10 07:07:04 -05:00
Scott Lahteine
828cc71847
Tweaks to STM32 headers
2019-07-10 07:07:04 -05:00
Scott Lahteine
94f2e82897
Serial assert (needs work)
2019-07-10 07:07:04 -05:00
Tanguy Pruvot
881e5a48bc
Fix M43 warning, XL density timers ( #14555 )
2019-07-10 06:30:57 -05:00
Scott Lahteine
44c8f29e47
More board name cleanup
2019-07-10 05:54:15 -05:00
Scott Lahteine
ed0e6afacb
Apply LIMIT macro
2019-07-10 03:35:39 -05:00
Scott Lahteine
9817976375
[cron] Bump distribution date
2019-07-10 00:00:08 -05:00
Ludy
a7bb1fc322
Fix Dual X,Y,Z UART pins in relation to TMC2208/9 ( #14554 )
2019-07-09 22:52:48 -05:00
Scott Lahteine
f990ebfb09
Tweak STM32F4/7 eeprom emulation ( #14563 )
2019-07-09 22:49:58 -05:00
Scott Lahteine
056efaba91
Clean up section comments
2019-07-09 22:34:21 -05:00
Scott Lahteine
5519054f50
Improve BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE ( #13740 )
2019-07-09 21:35:07 -05:00
Scott Lahteine
3ae3bf5d33
Get E2END from pins, fix Linux buffer
2019-07-09 21:32:13 -05:00
Scott Lahteine
01e8813286
EEPROM_EMULATED_WITH_SRAM => SRAM_EEPROM_EMULATION
2019-07-09 21:31:33 -05:00
Scott Lahteine
cb60001784
Clean up BOARD_NAME in pins
2019-07-09 21:31:06 -05:00
Scott Lahteine
c0e917ea83
DUE/usb should use platform min/max
2019-07-09 19:31:07 -05:00
gmarsh
ab99a80793
GMARSH X6 board support ( #14550 )
2019-07-09 00:30:08 -05:00
Scott Lahteine
a2ba0aaaac
HAL include and other adjustments ( #14525 )
2019-07-08 23:42:29 -05:00
Ludy
ba22857f93
Allow override of TMC_SW_* pins, etc.
2019-07-08 23:13:28 -05:00
Scott Lahteine
1a349c7522
Add HAS_TMC220x
2019-07-08 23:07:42 -05:00
Scott Lahteine
9821ec2afd
Fix SKR Pro pins, STM32F1/4 sanity-check
...
Co-Authored-By: Msq001 <msq001@users.noreply.github.com>
2019-07-08 23:07:42 -05:00
Scott Lahteine
2b1c2a0db9
[cron] Bump distribution date
2019-07-08 00:00:11 -05:00
Tim Moore
8b81c0e88f
LEDs to default on print completion ( #14535 )
2019-07-07 07:17:08 -05:00
Scott Lahteine
e7307af42d
[cron] Bump distribution date
2019-07-07 00:09:53 -05:00
Msq001
439e28783b
BigTree SKR Pro V1.1 board support ( #14523 )
2019-07-06 21:52:17 -05:00
Ludy
3a75342508
Allow override of TMC_SW_* pins ( #14528 )
2019-07-06 21:25:48 -05:00
igorepi
c1bb3278d4
Fix Russian grammar ( #14527 )
2019-07-06 21:24:57 -05:00
Ludy
c0497234b9
SanityCheck Biqu SKR 1.1 => BigTree SKR 1.1 ( #14526 )
2019-07-06 21:24:10 -05:00
Roxy-3D
cdf4ed87a1
Add back required precision for off printer mesh saves
2019-07-06 21:01:56 -05:00
Scott Lahteine
8916acf083
[cron] Bump distribution date
2019-07-06 00:00:09 -05:00
Tanguy Pruvot
8873c583d3
Prevent extra settings.load on boot ( #14499 )
2019-07-05 22:25:59 -05:00
Bob Kuhn
dc02d0720d
Pins Debugging for STM32 — NEEDS TESTING ( #14309 )
2019-07-05 22:08:06 -05:00
Tanguy Pruvot
052aa23efe
STM32F1: ignore output check for analogWrite() ( #14498 )
2019-07-05 21:13:32 -05:00
Alexander Amelkin
7a42132002
GTM32 Pro pins updates ( #14505 )
2019-07-05 21:09:17 -05:00
thisiskeithb
10a71e332d
Biqu SKR 1.1 => BigTree SKR 1.1 ( #14514 )
2019-07-05 20:57:08 -05:00
Vanessa Dannenberg
4fa8053638
RPW-Ultra thermistor table ( #14517 )
2019-07-05 20:37:05 -05:00
Ludy
a210f80adc
Sanity-check for CASE_LIGHT_PIN ( #14518 )
2019-07-05 20:18:43 -05:00
Scott Lahteine
253d0f9671
Some MIN/MAX rely on core
2019-07-05 20:07:48 -05:00
Scott Lahteine
535b70057e
Oops. Don't undef MIN/MAX
2019-07-05 18:42:21 -05:00
Scott Lahteine
021c4ccf5f
Fix SpindleLaser class
...
Fix #14465
2019-07-05 18:39:40 -05:00
Scott Lahteine
fe02241044
NONE on combined options
2019-07-05 18:20:24 -05:00
Scott Lahteine
67e0238c89
Reduce type warnings
2019-07-05 18:20:24 -05:00
Scott Lahteine
750a16ad38
Fix MIN/MAX function collision with macros
2019-07-05 18:14:02 -05:00
Scott Lahteine
b6546ea33a
Add include guards to some headers
2019-07-05 04:02:08 -05:00
Scott Lahteine
8ff49d6b46
[cron] Bump distribution date
2019-07-05 03:48:50 -05:00
Tanguy Pruvot
31450d9d6b
M43: spi channels are not pins ( #14502 )
2019-07-05 02:03:01 -05:00
Roman Moravčík
9736a21de2
Update Slovak language ( #14503 )
2019-07-05 02:02:20 -05:00
Giuliano Zaro
2bf11da5ab
Fix pin based on SOFT_SPI_CS ( #14504 )
2019-07-05 02:01:52 -05:00
Giuliano Zaro
66e16af29d
SPI defines cleanup ( #14506 )
2019-07-05 01:59:37 -05:00
Tim Moore
eb6dec03bd
Simplify power supply naming logic ( #14488 )
...
Co-Authored-By: Tim Moore <tim.moore@lightbend.com>
Co-Authored-By: AnHardt <github@kitelab.de>
2019-07-05 01:58:34 -05:00
Scott Lahteine
44e4f853c8
Patch M_PI in Marduino.h
2019-07-04 19:58:08 -05:00
Scott Lahteine
c6e6365e15
[cron] Bump distribution date
2019-07-04 15:56:02 -05:00
Roxy-3D
41b7f16ab8
Fix grammar of comment for G29 T command
2019-07-03 19:26:43 -05:00
Scott Lahteine
de462f2b8a
Revert "Sort out settings.load with SD EEPROM emulation ( #14458 )"
...
This reverts commit 108d0df565
2019-07-03 19:11:30 -05:00
Giuliano Zaro
b7573c6e69
Remove unused WRITE_VAR, etc. ( #14493 )
2019-07-03 17:52:30 -05:00
GMagician
8be146642f
Unused SPI PIN definitions
2019-07-03 17:49:55 -05:00
Scott Lahteine
6a2a10a154
Bump distribution date
2019-07-03 03:11:12 -05:00
Scott Lahteine
371969b531
Remove deprecated SCARA option
2019-07-03 02:43:33 -05:00
Scott Lahteine
ae9232962e
Use heater index defines
2019-07-02 23:29:43 -05:00
Scott Lahteine
f7eeae8424
Indent a line
2019-07-02 21:34:40 -05:00
teemuatlut
8aad29fb6e
Fix Prusa chopper timing preset
2019-07-02 20:51:33 -05:00
Scott Lahteine
1620738701
Home dir use < or >
2019-07-02 20:51:33 -05:00
Scott Lahteine
0f79fb9821
Generic stop pins (presume one endstop per axis end)
2019-07-02 20:30:26 -05:00
Scott Lahteine
ce2b4bc20c
Conditionals tweak
2019-07-02 20:30:26 -05:00
Ludy
3358caed14
Update German/Italian language ( #14482 )
2019-07-02 19:25:20 -05:00
Scott Lahteine
720bc7c00b
Named indices for Temperature class ( #14479 )
2019-07-02 08:39:55 -05:00
Scott Lahteine
274809aced
Bump distribution date
2019-07-02 05:54:06 -05:00
Scott Lahteine
ff55088491
Fix Malyan LCD warnings
2019-07-02 04:36:02 -05:00
Scott Lahteine
d4415dcf59
Fix analogWrite ambiguity
2019-07-02 04:36:02 -05:00
thisiskeithb
c6f74ba887
TH3D EZBoard v1.0 ( #14473 )
2019-07-02 03:12:32 -05:00
Marcio Teixeira
16409eb233
Suppress more UNUSED warnings ( #14466 )
2019-07-01 20:42:38 -05:00
GMagician
82ecaa767e
Remove unused code in M100
...
queue.buffer is in bss area, start_free_memory starts from heap then above of bss
2019-07-01 20:38:49 -05:00
GMagician
54358fbe28
Update Italian language
2019-07-01 20:37:59 -05:00
Scott Lahteine
c28e08c849
Fix mintemp/maxtemp monitoring for thermocouples
2019-07-01 10:24:53 -05:00
Scott Lahteine
de8fee6aea
Clarify ExtUI command injection
2019-07-01 09:23:00 -05:00
Scott Lahteine
448d482d3c
Update motherboard numbering ( #14460 )
2019-07-01 09:10:55 -05:00
Tanguy Pruvot
108d0df565
Sort out settings.load with SD EEPROM emulation ( #14458 )
2019-07-01 09:10:17 -05:00
Scott Lahteine
18e396b102
Update motherboard numbering
2019-07-01 07:06:38 -05:00
Msq001
c9be936d4a
BigTreeTech SKR Mini E3 ( #14457 )
2019-07-01 07:06:25 -05:00
Aliaksei Kvitsinski
2f932a11b3
Park heads with electromagnet ( #14023 )
2019-07-01 05:55:23 -05:00
Tanguy Pruvot
ca7f56e60b
Add 0.025mm Manual Move for Z ( #14456 )
2019-07-01 03:17:50 -05:00
Scott Lahteine
56c4a96180
Bump distribution date
2019-07-01 01:21:31 -05:00
Scott Lahteine
ced30b1054
Update ExtUI sanity checks
2019-07-01 00:50:22 -05:00
Scott Lahteine
10b85be405
status_message_level => alert_level
2019-07-01 00:47:08 -05:00
Tanguy Pruvot
24655a6bf3
Touch-MI Menu and Manual Deploy option ( #14290 )
2019-06-30 23:55:27 -05:00
Ludy
dab2f0c89c
Mask unused var, update (c) comments ( #14455 )
2019-06-30 22:29:33 -05:00
Ludy
0ca64a0ea3
Fix compile error with Z_PROBE_END_SCRIPT ( #14447 )
2019-06-29 23:20:49 -05:00
Scott Lahteine
d16954dc88
Make KEEPALIVE_STATE a scoped auto-restore ( #14446 )
2019-06-29 22:49:50 -05:00
Tanguy Pruvot
19aafb9050
Fix STM32F1 motor shocks (stepper timer issue) ( #14030 )
2019-06-29 04:39:38 -05:00
Scott Lahteine
3ea073ace6
Slight reduction in serial.h file size
2019-06-29 04:04:25 -05:00
thisiskeithb
6978bb5ea5
Fix MKS Robin Nano FAN_PIN ( #14444 )
2019-06-29 02:11:26 -05:00
th33xitus
fe2c710b39
Fix for Arduino Due + 12864 Full Graphic Display ( #14181 )
2019-06-29 01:37:02 -05:00
Phr3d13
34c8204d25
STM32F1 SD EEPROM Emulation Fixes ( #14261 )
2019-06-29 01:34:54 -05:00
Marcio Teixeira
e6cf7860e8
Improve ExtUI, fix compiler errors, warnings ( #14441 )
2019-06-29 00:23:57 -05:00
Scott Lahteine
e89a47c8b5
Bump distribution date
2019-06-29 00:13:59 -05:00
Scott Lahteine
b615b492ba
Update some HAL comments
2019-06-28 23:10:40 -05:00
Scott Lahteine
49027721e9
Clean up some pinsDebug headers
2019-06-28 22:50:56 -05:00
Scott Lahteine
c9a8db33c3
Fix scaledFanSpeed
2019-06-28 21:24:47 -05:00
Darsey Litzenberger
946f6bdeaa
Disable leveling during G12 ( #14385 )
2019-06-28 19:23:42 -05:00
Roman Moravčík
77c67085bf
Update Slovak language ( #14433 )
2019-06-28 18:57:43 -05:00
Giuliano Zaro
9174aa376f
Update Italian language ( #14440 )
2019-06-28 18:56:10 -05:00
Giuliano Zaro
07c998afe5
Fix E2END on RURAMPS ( #14438 )
2019-06-28 18:55:17 -05:00
Giuliano Zaro
a9445d557e
Remove extra #if ( #14439 )
2019-06-28 18:54:22 -05:00
Scott Lahteine
4d5a1984e2
Simplified fan handling code
2019-06-28 18:50:32 -05:00
Scott Lahteine
a8d68b7c8a
Common method for scaled fan speed
2019-06-28 15:34:17 -05:00
Scott Lahteine
1a09c4dea5
Cutter class followup
2019-06-28 15:34:17 -05:00
Scott Lahteine
9da02d2114
Help syntax highlighting (Sublime, et. al.)
2019-06-28 15:04:17 -05:00
Martin
ae9afb333e
Remove fwretract planner.synchronize calls ( #14432 )
2019-06-28 13:33:47 -05:00
Scott Lahteine
93cd66ac11
Tweaky change from (C) to (c)
2019-06-27 23:58:16 -05:00
Scott Lahteine
d7d80418ae
Singleton for cutting tools ( #14429 )
2019-06-27 23:06:49 -05:00
Scott Lahteine
2fde1475cb
Allow SD card sharing on SKR Mini
2019-06-27 22:30:13 -05:00
Scott Lahteine
7e16835c83
Use LCD conditionals in pins files ( #14428 )
2019-06-27 22:14:43 -05:00
thisiskeithb
8b63e3701f
MKS Robin Nano board support ( #14363 )
2019-06-27 21:33:41 -05:00
Tim Moore
81209f5310
'M105 R' to report redundant temp sensor ( #14324 )
2019-06-27 21:29:52 -05:00
Scott Lahteine
6664b90bbb
Init servo pins in HAL_init ( #14425 )
2019-06-27 16:29:17 -05:00
Tim Moore
8ce84fa44f
Add temperature-based auto power options ( #14397 )
2019-06-27 16:28:07 -05:00
InsanityAutomation
ce656e2a26
Update G-code injection, sub-commands ( #14418 )
2019-06-27 15:07:45 -05:00
InsanityAutomation
b961251899
Add Z_PROBE_END_SCRIPT to UBL ( #14419 )
2019-06-27 13:00:55 -05:00
Scott Lahteine
2580104c8b
Revert recent probe changes
...
- Revert "Fix FIX_MOUNTED_PROBE compile error (#14393 )"
- Revert "Fix G28 with non-BLTouch probes (#14381 )"
- Revert "Fix BLTOUCH deploy/stow in HS mode (#14352 )"
- Revert "Apply needed BLTouch patch (#14233 )"
Co-Authored-By: AnHardt <github@kitelab.de>
2019-06-26 05:33:43 -05:00
thisiskeithb
cd302f9464
Add MKS SGen-L Board ( #14411 )
2019-06-26 04:17:06 -05:00
Andy Shaw
064177154c
Update SD card connection / sharing options ( #14325 )
2019-06-26 03:55:57 -05:00
BigIronGuru
9f136a7c67
Low-priority homing in G34 ( #14391 )
2019-06-26 03:52:01 -05:00
Scott Lahteine
49627069a5
Shorthand for home-after-deactivate
2019-06-26 03:47:55 -05:00
J.C. Nelson
30a3db4f22
Fix Malyan M200 config and protocol ( #14394 )
2019-06-26 03:35:52 -05:00
oechslein
8c55bd5451
Update "StallGuard threshold" heading ( #14395 )
2019-06-26 03:33:07 -05:00
Scott Lahteine
98f3a3d5c3
Bump distribution date
2019-06-26 03:15:31 -05:00
Msq001
e3846ec7a1
SKR mini can use 128x64 LCD ( #14388 )
2019-06-26 01:12:41 -05:00
Eric Ptak
8934b32f1b
Fysetc AIO II / Cheetah STM32F1 ( #14407 )
2019-06-26 00:40:29 -05:00
Marcio Teixeira
8e23e9b16c
Fix FIX_MOUNTED_PROBE compile error ( #14393 )
2019-06-25 04:55:29 -05:00
Tanguy Pruvot
07dac315a9
Up-to-date STM32F1 README ( #14386 )
2019-06-24 03:44:26 -05:00
thisiskeithb
a4aa3621c0
MKS Robin Mini Board Support ( #14366 )
2019-06-24 03:42:22 -05:00
Scott Lahteine
cf762d2c73
Fix enqueueing bug
2019-06-23 23:02:07 -05:00
BigIronGuru
12d21e642f
Update G34 for non-BLTouch probes ( #14380 )
2019-06-23 20:55:43 -05:00
BigIronGuru
5986194c36
Fix G28 with non-BLTouch probes ( #14381 )
2019-06-23 20:53:05 -05:00
InsanityAutomation
aa0383a83b
Enhance IDEX toolchange auto-return w/ no park, full control ( #14117 )
2019-06-23 20:00:48 -05:00
Scott Lahteine
3d9d72e8db
Include order, spacing, etc.
2019-06-23 04:02:52 -05:00
mikeshub
1b1a4677f5
Fix LCD.h compilation error ( #14377 )
2019-06-22 21:08:30 -05:00
sjasonsmith
07b41a8c3f
Include SOLENOID_PROBE in leveling report ( #14344 )
2019-06-22 17:54:37 -05:00
thisiskeithb
71b2700c3c
Anycubic Trigorilla 1.4 Rev. 1.1 ( #14357 )
2019-06-22 17:53:45 -05:00
BigIronGuru
f5afaaef5b
Fix probe.cpp warning ( #14367 )
2019-06-22 17:27:33 -05:00
BigIronGuru
def4bb987d
Reset, stow BLTouch before mode change ( #14368 )
2019-06-22 17:26:02 -05:00
Scott Lahteine
78557076ff
Add planner.synchronize to UBL G29
2019-06-22 17:23:29 -05:00
BigIronGuru
6578aa4e1b
Apply minimum timing to BLTouch commands ( #14369 )
2019-06-22 17:20:19 -05:00
teemuatlut
2247bf1ba5
Add missing dedge init for TMC2209 ( #14370 )
2019-06-22 17:00:15 -05:00
mikeshub
1db7013e3b
Fix and improve PID loops ( #14373 )
...
- Windup guarding was missing. The kludge in place of windup guard is removed. D term filter calculations are simplified to require fewer `float` calculations. Sign change for D term output to make debugging output clearer.
- Use "no overshoot" for bed PID tuning.
2019-06-22 16:52:56 -05:00
Scott Lahteine
17778d1c2a
Fix M916-918 subcommands
2019-06-22 16:18:42 -05:00
Tanguy Pruvot
be69ec5b32
Fix PLR/M43 warnings ( #14333 )
2019-06-22 00:48:47 -05:00
BigIronGuru
9c83135d40
Only home Z at the end of G34 ( #14353 )
2019-06-22 00:43:33 -05:00
InsanityAutomation
5df051fdee
Fix Start SD Print bug ( #14354 )
...
Followup to the G-code parser injection update.
2019-06-22 00:37:21 -05:00
LinFor
0f6f5132c1
Fix variable conflict in ok_to_send ( #14351 )
2019-06-21 19:04:30 -05:00
MrMabulous
c41b005f33
Add Extra Probing option, discarding outliers ( #14338 )
2019-06-21 19:02:26 -05:00
BigIronGuru
8f99d45045
Fix BLTOUCH deploy/stow in HS mode ( #14352 )
2019-06-21 18:55:27 -05:00
Tobias Frost
eeaef2410a
Support DGUS Display with DWIN OS ( #13253 )
2019-06-21 04:47:23 -05:00
Scott Lahteine
bb0bcbaec0
Suppress compiler warning
2019-06-21 02:20:40 -05:00
Tanguy Pruvot
52383633e7
STM32F1: M43 PINS_DEBUGGING ( #14072 )
2019-06-21 01:20:17 -05:00
Karl Andersson
81d550754a
Fix "UNUSED" redefined warning on HAL_STM32 ( #14342 )
2019-06-21 00:48:10 -05:00
Karl Andersson
4b365552db
Fix Marduino SBI/CBI redefine ( #14341 )
2019-06-21 00:46:23 -05:00
InsanityAutomation
a9acd2f497
G34 configurable angle limit ( #14321 )
2019-06-20 21:18:36 -05:00
Marcio Teixeira
49ea1c635a
Fix missing dependencies ( #14339 )
2019-06-20 16:37:20 -05:00
Scott Lahteine
4df4c47994
Add TMC2209 support ( #14249 )
2019-06-20 15:47:50 -05:00
Tanguy Pruvot
ed0c70f0a0
SKRmini followup - Fysetc config updates ( #14327 )
2019-06-20 05:49:27 -05:00
Scott Lahteine
9131b11944
Games in Info menu, if enabled
2019-06-19 00:03:32 -05:00
Scott Lahteine
4c872a01f2
G-code queue singleton, front injection ( #14236 )
2019-06-19 00:00:19 -05:00
Tanguy Pruvot
75aeb41ab7
SKRmini support for Fysetc Mini Panel ( #14319 )
2019-06-18 19:34:16 -05:00
InsanityAutomation
bf64dd4db6
Improve G34, M422 (Z alignment) ( #14142 )
2019-06-18 07:02:18 -05:00
Tanguy Pruvot
391250b04f
STM32F1: Don't toggle EEPROM SPI SS ( #14299 )
2019-06-18 06:48:20 -05:00
Giuliano Zaro
27d30c1be8
Update Italian language ( #14302 )
2019-06-18 06:45:34 -05:00
Scott Lahteine
3f6424076b
Update M524 description
2019-06-18 05:04:55 -05:00
Scott Lahteine
cf3631226b
Document G-code M290
2019-06-18 04:53:31 -05:00
3DSmitty
5b13abcacb
Fix SPI_SD Outside of HAL_STM32F1 ( #14306 )
2019-06-18 02:38:18 -05:00
Bob Kuhn
089d12df16
Fix duplicate board IDs ( #14310 )
2019-06-18 02:26:13 -05:00
Ludy
2290b269dc
Unused variable ( #14301 )
2019-06-18 00:15:41 -05:00
Scott Lahteine
6b2d42434c
Wrap main menu external declarations
2019-06-17 21:44:56 -05:00
Scott Lahteine
651f3eeed0
Clean up trailing whitespace
2019-06-17 20:22:07 -05:00
Ludy
35aabd1834
Fix Spindle/Laser compile error ( #14312 )
2019-06-17 18:38:43 -05:00
Scott Lahteine
21f377d94a
STM32F1: various small changes ( #14313 )
...
- init the led pin as output (like other HALs)
- reduce sdio dma priority to normal.. highest is never the best...
- allow fsmc only on compatible STM32F1 (like HAL fsmc)
- fsmc: remove an useless C style cast
2019-06-17 17:48:50 -05:00
sensei73
ce5f94c8f4
Fix Touch-MI sanity checks ( #14316 )
2019-06-17 17:46:14 -05:00
Tanguy Pruvot
287df7a61f
STM32F1: various small changes
...
- init the led pin as output (like other HALs)
- reduce sdio dma priority to normal.. highest is never the best...
- allow fsmc only on compatible STM32F1 (like HAL fsmc)
- fsmc: remove an useless C style cast
2019-06-17 10:27:30 +02:00
3DSmitty
66d51272af
Fix SPI, SD for BIGTREETECH SKR Mini ( #14287 )
2019-06-15 18:12:05 -05:00
Scott Lahteine
903863dcb6
Suppress some warnings
2019-06-15 17:47:59 -05:00
Scott Lahteine
eb1c9113c2
Try to init SD with no detect pin
2019-06-15 15:36:48 -05:00
Scott Lahteine
9a56a88200
Use OUT_WRITE in SPI pin init
2019-06-15 15:36:43 -05:00
Scott Lahteine
24c23b60fa
Use lambda, fix wrap pointer
2019-06-15 15:36:42 -05:00
pinchies
3021097888
Add JGAurora A5S and A1 (STM32F103ZET6) ( #14291 )
...
- Now compiles and works correctly with changes to HAL timers and watchdog.
- Does NOT include awesome work on touch screen function.
- Does have working LCD and SD-based EEPROM.
2019-06-15 14:28:22 -05:00
Ludy
6fb3db1633
Update German language ( #14294 )
2019-06-15 14:26:14 -05:00
Scott Lahteine
a17f057daa
Fix word wrapping on select screens
2019-06-15 14:06:23 -05:00
Tanguy Pruvot
f2cfa408b7
Touch-MI probe by hotends.fr ( #14101 )
...
A simple Z probe using a magnet to deploy a probe. See https://youtu.be/E7Ik9PbKPl0 for the sensor description...
2019-06-14 22:19:48 -05:00
Scott Lahteine
26de051e92
HAL SPI pin init cleanup
2019-06-14 20:17:25 -05:00
Scott Lahteine
50c9b33ed7
!ENABLED => DISABLED
2019-06-14 00:44:49 -05:00
teemuatlut
29afd11cbf
Updates for TMC2660 init ( #14245 )
2019-06-13 23:16:10 -05:00
Scott Lahteine
dfdbd1e75f
Use TEST macro where possible
2019-06-13 20:59:12 -05:00
teemuatlut
12a270fd29
Fix TMC5160 and TMC2160 PWMCONF init
2019-06-13 20:57:12 -05:00
Scott Lahteine
fc73a8b004
Add AXIS_HAS_SQUARE_WAVE shorthand
2019-06-13 20:57:12 -05:00
mb300sd
bf8bfb5c66
Add Coolant Control M7/M8/M9 ( #10745 )
2019-06-13 18:43:11 -05:00
Aliaksei Kvitsinski
648a91bce8
Support for Z-Bold board ( #14024 )
2019-06-13 03:21:18 -05:00
MastS
18904c42f6
Fysetc LCD backlight timeout ( #14265 )
2019-06-12 21:59:39 -05:00
Scott Lahteine
bc2ff9b41f
Fix M605 bugs
...
Fixes #14191
2019-06-12 20:01:08 -05:00
Tanguy Pruvot
7d1eafc80a
STM32F1: C++14 for static_assert, etc. ( #14278 )
2019-06-12 18:44:32 -05:00
Msq001
26e7e33698
Fix bug in STM32F1 WRITE macro ( #14275 )
2019-06-12 06:30:24 -05:00
Scott Lahteine
04715e04ee
Minor M100 cleanup
2019-06-12 06:14:40 -05:00
Scott Lahteine
356410dcfc
Move crc16 function to libs
2019-06-12 06:14:39 -05:00
Scott Lahteine
2a96d4e23a
Move number-to-string functions to libs
2019-06-11 07:51:47 -05:00
Scott Lahteine
1ef95013f0
Update Marlin.cpp includes, defines
2019-06-11 07:30:51 -05:00
Kaushik Vemparala
c88d9ae282
Option to leave heaters set on SD abort ( #14251 )
2019-06-10 23:57:55 -05:00
Tanguy Pruvot
8cf5504a34
Redundant but faster recovery.enabled test ( #14175 )
2019-06-10 23:33:35 -05:00
Tanguy Pruvot
c3e5225531
Add SPI EEPROM to STM32F1 ( #14239 )
2019-06-10 23:30:23 -05:00
felixstorm
9439fab7fd
Fix ESP32 servos, platformio.ini, etc. ( #14247 )
2019-06-10 23:22:19 -05:00
yangwenxiong
b0a4ea79b8
BigTreeTech SKR Mini v1.1 ( #14041 )
2019-06-10 21:10:51 -05:00
Robby Candra
f30b89953d
runout.distance_mm LCD edit item ( #14066 )
2019-06-10 20:18:06 -05:00
mikeshub
a3f034b95e
FFCP updates. Update XY soft endstops on tool_change ( #14125 )
2019-06-10 18:01:42 -05:00
InsanityAutomation
b7eeb5b13b
Move BLTouch options to adv config ( #14131 )
...
Plus other BLTouch and menu enhancements.
2019-06-10 17:46:42 -05:00
Scott Lahteine
0ca2073625
ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED => SD_ABORT_ON_ENDSTOP_HIT
2019-06-10 17:28:35 -05:00
thisiskeithb
662e7da8a4
Fix USE_BIG_EDIT_FONT bug ( #14252 )
2019-06-09 19:37:14 -05:00
teemuatlut
cccc51ee0e
TMC Square Wave Stepping mode ( #14195 )
2019-06-09 05:08:05 -05:00
Scott Lahteine
80ce0d2bdb
Whitespace cleanup
2019-06-08 06:40:44 -05:00
Scott Lahteine
455f0de817
Undefine sanity check tests when done
2019-06-08 06:29:28 -05:00
Robby Candra
7e07a3888b
Fix PLR Z bug affecting Cartesians ( #14230 )
2019-06-08 05:27:58 -05:00
Robby Candra
5ca8d51e12
Ability to insert G-code in front of queue ( #14229 )
2019-06-08 05:23:53 -05:00
BigIronGuru
293018f76c
Apply needed BLTouch patch ( #14233 )
2019-06-07 21:43:20 -05:00
Scott Lahteine
ffb76b75d7
fix TMC2208 boot loop with SW UART ( #14135 )
...
Need stepper .begin() before calling susbequent .push()
2019-06-07 07:27:10 -05:00
InsanityAutomation
4138b1f9ae
Option to disable Case Light brightness control ( #14165 )
2019-06-07 07:23:42 -05:00
Tanguy Pruvot
764f0d9c1c
STM32F1: Servo "soft" PWM via timer interrupt ( #14187 )
2019-06-07 07:11:48 -05:00
InsanityAutomation
66e22d9f5a
ExtUI Heated Chamber support ( #14198 )
2019-06-07 07:08:41 -05:00
Scott Lahteine
9206c0e869
Use limit switch overrides
2019-06-05 22:27:06 -05:00
Scott Lahteine
34d2801bbe
Rename pins file (2)
2019-06-05 21:41:58 -05:00
Scott Lahteine
fa3b5fb059
Uppercase pins filename
2019-06-05 21:41:58 -05:00
Scott Lahteine
858b2fa21a
Fix thermistor table
2019-06-05 21:39:39 -05:00
InsanityAutomation
f6ec00d776
Update thermistor and working config
2019-06-04 20:25:00 -04:00
InsanityAutomation
bbcb61e042
Initial Commit - Add board
2019-06-03 23:49:19 -04:00
Tanguy Pruvot
e4260a41cb
Fix a DEBUG_LEVELING_FEATURE string copy ( #14200 )
2019-05-31 18:52:11 -05:00
Ryan
9d9030a39c
Fix Archim1 SD card ( #14184 )
2019-05-30 19:58:38 -05:00
InsanityAutomation
123e58d9c3
Heated Chamber for Graphical LCD ( #14190 )
2019-05-30 18:31:50 -05:00
Scott Lahteine
93ab16c6e4
Remove old mixing ISR comment
2019-05-30 17:05:16 -05:00
Scott Lahteine
6572848d7f
Fix stepper timing bug
2019-05-30 16:58:53 -05:00
Bob Kuhn
688b54d66a
DUE USB composite device field corrections ( #14185 )
2019-05-30 16:26:48 -05:00
InsanityAutomation
f889cc6ea6
ExtUI parity with SPI LCDs ( #14172 )
2019-05-30 16:24:13 -05:00
Scott Lahteine
07021c85c8
Tweak timer16_Sequence_t
2019-05-30 16:09:37 -05:00
Roman Moravčík
d70929f7c0
Update Slovak language ( #14179 )
2019-05-30 15:57:14 -05:00
Tanguy Pruvot
e3a468f2cd
STM32F1: FSMC only on chips with 100/144 pins ( #14180 )
2019-05-30 15:51:02 -05:00
Ludy
8e8e48f900
Fix links in templates, gcode.h ( #14160 )
2019-05-28 21:39:55 -05:00
InsanityAutomation
34ae76025e
Clear Pausing message after M600 park ( #14171 )
2019-05-28 21:36:14 -05:00
Ludy
bd494a6bd6
Update defines for patched temperature macros ( #14161 )
2019-05-28 17:43:31 -05:00
doggyfan
e09d8811c1
Apply grace period to thermistor failure testing ( #14167 )
2019-05-28 15:36:03 -05:00
InsanityAutomation
0f04ba016f
Adjust tool offset menus ( #14153 )
2019-05-27 21:29:08 -05:00
teemuatlut
bf4a0db97f
TMC LCD followup ( #14134 )
2019-05-27 21:24:20 -05:00
Minims
32afe1d102
Fix TOOLCHANGE_ZRAISE warning ( #14156 )
2019-05-27 19:51:29 -05:00
Robby Candra
5515f88452
Clarify SD longname string size ( #14148 )
2019-05-27 19:50:48 -05:00
Tanguy Pruvot
5f42d3a8b4
BLTouch French updates ( #14137 )
2019-05-27 01:02:35 -05:00
Scott Lahteine
d3bb5b69ba
Apply NOLESS/NOMORE
2019-05-26 20:55:00 -05:00
Scott Lahteine
b315157053
Apply const to mcp4728
2019-05-26 20:54:24 -05:00
Scott Lahteine
3c179bbd47
Simpler G28 home axis conditions
2019-05-26 16:26:55 -05:00
Scott Lahteine
352734494b
Reduce some M43 strings
2019-05-26 16:21:28 -05:00
Scott Lahteine
b14cc0d7c5
Remove extra gcode. prefix
2019-05-26 16:18:45 -05:00
Scott Lahteine
c6d39319de
Fix some whitespace
2019-05-26 16:18:43 -05:00
InsanityAutomation
212860f090
Always change to Tool 0 on G29 ( #14146 )
2019-05-26 14:53:21 -05:00
Giuliano Zaro
7b838f31be
DUE HAL cleanup ( #14126 )
2019-05-26 14:51:32 -05:00
Chris
36a0376c36
fix TMC2208 boot loop with SW UART
...
Need stepper .begin() before calling susbequent .push()
2019-05-26 13:07:12 +02:00
Robby Candra
df7733425c
Shorten pause message for 4 line LCD ( #14097 )
2019-05-26 02:33:52 -05:00
Scott Lahteine
605ec0a478
Fix thermistor table warning
2019-05-26 01:30:20 -05:00
doggyfan
90121047d9
Fix thermal protection with user thermistor ( #14130 )
2019-05-25 23:37:08 -05:00
Scott Lahteine
81cee05476
Update some env in pins.h
2019-05-25 23:17:50 -05:00
Scott Lahteine
47fd74a98d
Clean up fast_pwm.cpp
2019-05-25 23:05:01 -05:00
Scott Lahteine
49229d97db
Consistent _useTimerX tests
2019-05-25 23:05:01 -05:00
Scott Lahteine
8924389dfc
Tweak servo µs macros
2019-05-25 22:33:51 -05:00
InsanityAutomation
49e83dd7c8
BLTouch V3.1 changes ( #14104 )
2019-05-25 21:56:47 -05:00
Scott Lahteine
f8bede6b5e
Fix some HAL includes
2019-05-25 19:20:17 -05:00
Bryan
0ef5d667b6
Fixed M43 parameter bug ( #14099 )
2019-05-25 18:23:25 -05:00
teemuatlut
1c86fbc60b
TMC updates, capture LCD changes ( #14074 )
2019-05-25 18:22:12 -05:00
felixstorm
74f44783ac
ESP32 servo support ( #14109 )
2019-05-25 18:12:24 -05:00
felixstorm
bc5a1fe562
Various fixes for ESP32 ( #14102 )
2019-05-25 17:06:00 -05:00
Giuliano Zaro
e1bf34bdc9
Ruramps4d typo fix ( #14096 )
2019-05-25 16:41:08 -05:00
Scott Lahteine
44caf70917
Improve editing, fix some small value editing
2019-05-25 15:29:00 -05:00
Scott Lahteine
612eaa87bd
Fix "back" items in some sub-menus
2019-05-25 15:28:52 -05:00
Scott Lahteine
c5dc2e5a71
Update advanced BLTouch menu items
2019-05-25 15:26:25 -05:00
Scott Lahteine
48d1bd29cb
Shift m before compare to 0
2019-05-25 15:22:15 -05:00
InsanityAutomation
9f69fbe5ee
Move some menu items ( #14118 )
2019-05-25 15:16:00 -05:00
Scott Lahteine
fc52c43a26
Some documentation updates
2019-05-24 16:30:44 -05:00
Tanguy Pruvot
24b1818245
Secure STM32F1 servo code and M280 detach ( #14085 )
2019-05-22 16:57:19 -05:00
Scott Lahteine
a49919396a
LPC1768 MarlinServo => libServo
2019-05-22 16:54:52 -05:00
Scott Lahteine
2b5046659a
Tweak Marlin headers, comments
2019-05-22 16:54:52 -05:00
Scott Lahteine
cc862a8213
Replace some functions with lambdas
2019-05-22 16:54:35 -05:00
Ludy
fafd73a3af
Update copyright in headers ( #14092 )
2019-05-22 16:24:13 -05:00
Giuliano Zaro
2298923a9b
Update Italian language ( #14095 )
2019-05-22 16:23:41 -05:00
Ludy
41f61a12b8
Update German language ( #14093 )
2019-05-22 16:23:16 -05:00
doggyfan
594f6b14be
Limit user thermistor to 999, fix thermistor table macro ( #14080 )
2019-05-21 21:31:05 -05:00
Giuliano Zaro
a74aad3b4a
Clean up HALs / FastIO ( #14082 )
2019-05-21 18:28:12 -05:00
Scott Lahteine
4ef364a073
Sanity check probe offsets must be integers
2019-05-21 17:16:21 -05:00
Scott Lahteine
cfca07852a
Backlash linker error workaround
...
Fix #14045
2019-05-20 21:52:56 -05:00
Scott Lahteine
aeec9ef76b
Update backlash code
2019-05-20 21:34:08 -05:00
Scott Lahteine
7b4c3bd92a
Fix call to synchronize in lcd_pause_job
2019-05-19 15:51:45 -05:00
Pavel4e5
3cd19a8ec0
Improve Zonestar keypad responsiveness ( #14056 )
2019-05-18 20:52:55 -05:00
Tanguy Pruvot
402f1f7307
STM32F1: STM32_HIGH_DENSITY is auto defined in HAL ( #14057 )
...
- Fix the `fsmc` and `sdio` units which required hard defines for use.
2019-05-18 20:45:22 -05:00
Tanguy Pruvot
87e7193259
Fix M226 sign warning (for most platforms) ( #14049 )
2019-05-18 16:15:48 -05:00
Tanguy Pruvot
256f810df2
Add open-drain output mode to STM32F1 FastIO ( #14050 )
...
- This mode is often used/preferred to drive printer boards' MOSFETs.
- Can generally boost the allowed output power (for hotbed,nozzle and fans).
2019-05-18 16:12:00 -05:00
Bob Kuhn
1dad6e754b
Neopixel background LED option ( #14025 )
2019-05-18 02:36:37 -05:00
InsanityAutomation
84ac5b360b
Fix ExtUI mesh functions ( #14027 )
2019-05-17 20:37:23 -05:00
Scott Lahteine
9b5f9dda0e
Update analog pins labels
2019-05-17 20:22:25 -05:00
FanDjango
85fb33a060
BLTOUCH tweaks, new v3.1 command ( #14015 )
2019-05-17 19:10:18 -05:00
GUEST.it
62ef54cb81
UBL: Log and display G29 progress ( #14036 )
2019-05-17 19:02:21 -05:00
GUEST.it
7907eec04c
Fix power loss recovery with SINGLENOZZLE ( #14033 )
2019-05-17 18:47:15 -05:00
Scott Lahteine
efe651e749
Add THERMISTOR_NAME for 1000
2019-05-17 18:26:53 -05:00
Scott Lahteine
0b056970c6
Fix file.open in STM32 eeprom emu
2019-05-17 18:26:53 -05:00
InsanityAutomation
06f3273531
Fix DELTA pulse wait bug ( #14028 )
2019-05-17 16:16:56 -05:00
Marcio Teixeira
7ccbcf2eaa
Fix TMC EEPROM regression ( #14008 )
...
Partially undo 15357af
2019-05-16 20:38:03 -05:00
Marcio Teixeira
9558962d59
Fix DUE HAL SW SPI compile error ( #14005 )
2019-05-16 20:36:19 -05:00
InsanityAutomation
07afe69cee
Fix some bad AZTEEG_X5_MINI pins ( #14011 )
2019-05-16 20:33:00 -05:00
Chris Pepper
451ea996c9
[LPC176x] Fix switch fallthrough
2019-05-15 10:35:26 +01:00
Tanguy Pruvot
d7b0369e39
STM32: Fix SD EEPROM emulation conflict ( #14012 )
2019-05-15 02:42:10 -05:00
Scott Lahteine
785c01f2bc
Use US spelling of 'behavior'
2019-05-15 01:49:17 -05:00
Sam Lane
7f1e0c5670
Update EXTRA_LINADV_K with Marlin bit macros ( #13993 )
2019-05-15 01:07:07 -05:00
Bob Kuhn
48bd8899bd
Cohesion 3D Remix: Onboard SD card, Fysetc LCD ( #13991 )
2019-05-15 00:59:57 -05:00
FanDjango
dcaefc68a5
BLTouch.init should not deploy ( #13988 )
...
Low or unknown probe clearance on init (even at powerup) is a risk and therefore, a deploy should be avoided because dragging the pin is possible: A deploy goes into alarm if it can't extend fully and then the subsequent stow will fail.
2019-05-14 23:55:11 -05:00
Tanguy Pruvot
8075893352
STM32: fix sdcard filename conversion
2019-05-12 04:26:21 +02:00
chai-md
940ff8e7c8
Improve LV8729 stepping ( #13776 )
2019-05-11 19:02:19 -05:00
InsanityAutomation
991ee7552b
Restore menu edit to 32bit value ( #13976 )
2019-05-11 18:44:35 -05:00
Tanguy Pruvot
93dd097b1c
Use E2END, if defined, for STM32F1 (SD) ( #13981 )
2019-05-11 18:22:31 -05:00
InsanityAutomation
5108e4b6aa
Cleaner EEPROM auto init ( #13975 )
2019-05-11 16:54:03 -05:00
Bob Kuhn
456a0ee76b
Improve Due SW SPI, Fysetc sanity checks, &c. ( #13939 )
2019-05-11 16:51:39 -05:00
Robby Candra
7b78a20fb7
Fix: Debug Memory Dump size ( #13957 )
...
* Fix Memory Dump size
* Fix Compile error on Memory Dump
2019-05-11 11:44:39 -05:00
Scott Lahteine
a613bcad2d
Fix some spelling
2019-05-10 20:39:19 -05:00
Tanguy Pruvot
62b36d1b98
Fix STM32 timer warnings ( #13946 )
2019-05-10 20:00:21 -05:00
Giuliano Zaro
f22c9a1ae1
Fix G-code parser with MMU2 ( #13951 )
2019-05-10 19:57:15 -05:00
Marcio Teixeira
746c38f4be
Fix HAL_DUE multiple define error with graphical LCD ( #13971 )
2019-05-10 19:52:43 -05:00
Bob Kuhn
75eca5c4f8
Fysetc pins updates for RAMPS and SKR 1.3 ( #13963 )
2019-05-10 19:29:28 -05:00
Marcio Teixeira
227f29090d
Add heater timeouts to ExtUI ( #13970 )
...
- Add local UI methods to get heater timeout state.
- Add methods to resume timed-out heaters.
- Re-enable heaters on UI temperature request.
- Make `ExtUI` show a dialog box if pause needs a button press after reheat.
2019-05-10 15:56:13 -05:00
Bob Kuhn
fa3739aa23
M100: LPC1768 and DUE compatibility ( #13962 )
2019-05-09 21:57:44 -05:00
InsanityAutomation
3f758d9e00
Fix some edit items for 16-bit encoder ( #13948 )
2019-05-09 18:28:47 -05:00
ManuelMcLure
51acbb2201
Prevent HOST_PROMPT_SUPPORT compile error ( #13943 )
2019-05-09 11:48:31 -05:00
Scott Lahteine
ad4ffa1d2f
Use C++ language supported 'nullptr' ( #13944 )
2019-05-09 11:45:55 -05:00
Tanguy Pruvot
e53d7e5517
STM32: ADC warning fix ( #13933 )
2019-05-09 00:33:38 -05:00
Scott Lahteine
23ec650410
Consolidate Malyan LCD and ExtUI
2019-05-07 21:31:30 -05:00
InsanityAutomation
6811e2921b
BLTouch v3 / 3DTouch Interoperability & performance ( #13814 )
2019-05-07 21:25:54 -05:00
Giuliano Zaro
40aff7e1f2
Remove extra MMU (non-12V) code ( #13938 )
...
`check_version` in state -5 should not be needed since it has already been called in state -4 and the tested build nr is only updated in state -4.
2019-05-07 21:02:08 -05:00
Tanguy Pruvot
11adcf1ce3
Add'l PLR options, AVR strstr_P compat ( #13880 )
2019-05-07 20:38:40 -05:00
InsanityAutomation
5dcb25664f
Option to Auto-Initialize EEPROM ( #13935 )
2019-05-07 16:30:31 -05:00
Ludy
a504366138
Fix probe fan compiling error ( #13930 )
2019-05-07 14:14:12 -05:00
Tanguy Pruvot
24e956d168
Avoid int8_t underflow on filament runout ( #13895 )
2019-05-07 13:58:10 -05:00
Stephan
483822f3aa
Fix some THERMAL_PROTECTION_CHAMBER issues ( #13678 )
2019-05-06 19:55:01 -05:00
doggyfan
23a8707ef1
Configurable Thermistor ( #13888 )
2019-05-06 18:51:06 -05:00
J.C. Nelson
172abc305b
Malyan M200 core fixes ( #13927 )
2019-05-06 18:07:13 -05:00
Scott Lahteine
a36782ac1d
Define more u8g command macros
2019-05-06 17:26:34 -05:00
Scott Lahteine
f9a50f451d
Serial out cleanup
2019-05-06 17:26:34 -05:00
Scott Lahteine
9853331b34
Fix temp init, loosen ADC grace period
2019-05-05 22:55:03 -05:00
Tanguy Pruvot
a4c24511f7
STM32: Fix Marduino SBI/CBI redefine ( #13912 )
2019-05-05 22:06:30 -05:00
Ludy
c837e9250c
Define tmc variables where needed ( #13918 )
2019-05-05 22:04:47 -05:00
Ludy
f96eaad1ea
Unused variable cleanup ( #13917 )
2019-05-05 22:01:04 -05:00
Ludy
421d526ba7
Update German language ( #13915 )
2019-05-05 22:00:19 -05:00
Giuliano Zaro
b07360f32a
Update Italian language ( #13916 )
2019-05-05 21:59:34 -05:00
Robby Candra
79955f0c89
Fix PLR file delete bug ( #13860 )
2019-05-04 23:30:47 -05:00
ManuelMcLure
09f1b58146
Fix HOST_PROMPT_SUPPORT compile issue ( #13847 )
2019-05-04 22:55:51 -05:00
Giuliano Zaro
e2a77ed881
Bring chamber temp to completion ( #13837 )
2019-05-04 22:51:47 -05:00
Robert Mendon
24177954dd
Add missing AZSMZ Mini SPI pins ( #13824 )
2019-05-04 22:04:01 -05:00
kAdonis
ee73e17c9b
Hide 'vsense' report row if not used ( #13884 )
2019-05-04 22:00:24 -05:00
jmdearras
68004174d9
Fix thermistor 501 name ( #13839 )
2019-05-04 21:40:41 -05:00
Bob Kuhn
c48e6be366
Fysetc panel, RUMBA and ReARM pins, SPI mode 3 ( #13900 )
2019-05-04 17:59:36 -05:00
Chris
fd9d3ae181
Re-Arm 4x TMC2208 stepper improvement ( #13819 )
2019-05-04 17:26:13 -05:00
Tanguy Pruvot
e7b3720b81
Menu edit accel in increments of 25 ( #13850 )
2019-05-04 17:21:58 -05:00
Tanguy Pruvot
7da63fa03f
Fix NOMORE() sign warning in stepper ( #13894 )
2019-05-04 15:59:38 -05:00
Roman Moravčík
6d0ce033c2
Update Slovak language. ( #13840 )
2019-05-04 15:58:01 -05:00
InsanityAutomation
3fcab8dbf1
Option to disable fans during pause ( #13820 )
2019-05-04 15:50:44 -05:00
Chris Pepper
66f7065248
[LPC176x] Update extra script to support Python3 ( #13908 )
2019-05-04 20:52:28 +01:00
Scott Lahteine
2f32a6612d
Clean up Temperature::set_fans_paused
2019-05-04 14:36:59 -05:00
Marcio Teixeira
15357af67c
Backlash cleanup ( #13659 )
...
…And save backlash, fil. sensor, ExtUI userdata to EEPROM.
2019-05-03 23:53:15 -05:00
Robby Candra
0181e57417
Add a minimum Z change option to power-loss recovery ( #13859 )
2019-05-02 22:29:05 -05:00
Robby Candra
c369477cb0
Fix bug: diveToFile breaks M23 ( #13865 )
2019-05-02 15:54:24 -05:00
Tanguy Pruvot
e5438a9a03
settings: store runout sensor on/off ( #13876 )
2019-05-02 00:47:26 -05:00
Scott Lahteine
e7682eea42
Use Arduino.h include wrapper ( #13877 )
2019-05-02 00:45:50 -05:00
Tanguy Pruvot
51d1e0f1dd
Auto-mount the SDIO SD card ( #13879 )
2019-05-02 00:45:21 -05:00
Thomas Moore
ee243e4edf
Fix mixing extruder filament change ( #13803 )
2019-05-01 21:55:58 -05:00
Scott Lahteine
bf54251a10
Finish, improve, clean up FYSETC_MINI_12864 revisions ( #13871 )
2019-05-01 20:05:29 -05:00
Tanguy Pruvot
3272d0db01
Update French language ( #13866 )
2019-05-01 13:00:07 -05:00
Chris Pepper
95beafa9a2
Fix typo
2019-05-01 16:30:21 +01:00
Ludy
408a5f08dc
Update German language ( #13853 )
2019-05-01 01:25:57 -05:00
Tanguy Pruvot
cf3c746029
Improve French language ( #13851 )
2019-05-01 01:12:25 -05:00
Clinton James
2740cc64d8
Add SD Release when no SD_DETECT_PIN exists ( #13857 )
2019-05-01 01:00:21 -05:00
Luu Lac
39ebca6b5f
Fix FYSETC, MINIPANEL, MKS_MINI_12864 display ( #13864 )
2019-05-01 00:37:52 -05:00
Giuliano Zaro
93dcb537ef
Update Italian language ( #13809 )
2019-04-30 20:31:40 -05:00
Scott Lahteine
e43afb1a58
Clean up SKR pins
2019-04-27 14:56:12 +02:00
Scott Lahteine
9ccbd382e7
Update Watchdog description
2019-04-27 14:56:12 +02:00
Scott Lahteine
b6279abd30
Better THERMAL_PROTECTION_GRACE_PERIOD
...
See #13783
2019-04-27 14:40:09 +02:00
chai-md
ed9eaa1942
Fix a comment in fwretract.cpp ( #13802 )
2019-04-26 09:36:29 +02:00
InsanityAutomation
610fb46683
Fix some ExtUI issues ( #13799 )
2019-04-26 09:32:01 +02:00
Bob-the-Kuhn
db89fc0304
Revert "bring my copy up to date"
...
This reverts commit 503905c628
2019-04-25 17:38:41 -05:00
Bob-the-Kuhn
503905c628
bring my copy up to date
2019-04-25 12:08:49 -05:00
Bob-the-Kuhn
73726d56b3
Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x
2019-04-25 12:06:01 -05:00
Scott Lahteine
5051909c3c
Update do_select_screen for general use ( #13800 )
2019-04-24 10:13:44 -05:00
Scott Lahteine
63f6ad3fd2
Basic RAMPS SD_DETECT_PIN override
2019-04-23 18:10:21 -05:00
InsanityAutomation
c6632925e3
Force no move on IDEX full control mode ( #13797 )
2019-04-23 15:20:59 -05:00
Giuliano Zaro
e2dd2268e8
Add a Z raise-between-probes to G34 ( #13791 )
2019-04-23 13:40:55 -05:00
Giuliano Zaro
0f9c49ccba
Update Italian language ( #13790 )
2019-04-23 13:36:05 -05:00
Giuliano Zaro
d77ef437db
Fix warning for redefined DEBUG_PRINT_P ( #13789 )
2019-04-23 13:35:02 -05:00
Marcio Teixeira
ca7f6ff287
Fix MSG_En messages for consistency ( #13788 )
2019-04-23 13:31:51 -05:00
Scott Lahteine
0c4d3e6622
Improve M906 description
2019-04-22 13:48:02 -05:00
Tanguy Pruvot
04ae3ba1fd
Major update to French language ( #13784 )
2019-04-22 13:31:04 -05:00
chai-md
78d7349fd7
Remove extra Z raises in tool change ( #13782 )
2019-04-21 21:06:46 -05:00
Kajetan Rzepecki
875e673a8c
Add HAL-based thermal protection grace period for all heaters ( #13778 )
2019-04-21 20:50:32 -05:00
Bob Kuhn
81ca5a4cd4
Fix and improve FYSETC LCD support ( #13767 )
2019-04-21 20:48:53 -05:00
felixstorm
4e35e6c705
Fix SS pin in ESP32 HW SPI ( #13781 )
2019-04-21 17:15:15 -05:00
felixstorm
4a48b70c0b
Fix (re-)defines in HAL_ESP32 ( #13780 )
2019-04-21 17:14:38 -05:00
Ludy
4228fd3e03
Update German language ( #13769 )
2019-04-20 15:01:56 -05:00
Kajetan Rzepecki
5f70c876ae
Fix _temp_error-related compile error ( #13768 )
2019-04-20 13:57:38 -05:00
Kajetan Rzepecki
ea1ee02b53
Disable hardware PWM on ESP32 I2S expander ( #13762 )
2019-04-20 13:41:17 -05:00
Scott Lahteine
bddb776ddb
Add chamber max-temp check
...
Followup to #13756
2019-04-19 22:18:55 -05:00
Marcio Teixeira
d0c1eee53b
Add extra max-temp safety checks ( #13756 )
2019-04-19 21:37:12 -05:00
Marcio Teixeira
4ac28ba6b3
Add missing file ( #13754 )
2019-04-19 20:20:45 -05:00
jmdearras
b65cb5704d
Fix, improve FYSETC_MINI_12864 support ( #13730 )
2019-04-19 20:11:51 -05:00
Scott Lahteine
69c333ead9
More universal Formbot pins
...
Replace `ROXYs_TRex` with pre-defines of the relevant pins at the configuration level.
2019-04-18 21:09:34 -05:00
Scott Lahteine
0a6835fbea
More robust HAS_LCD_CONTRAST
2019-04-18 21:09:34 -05:00
Marcio Teixeira
2e3d121ac4
Squelch compiler warning ( #13739 )
2019-04-18 13:18:49 -05:00
Kajetan Rzepecki
d83a7924e6
Fix ESP32 TOGGLE() with I2S expander ( #13743 )
2019-04-18 13:15:35 -05:00
Jimmy Wennlund
e6f6ed76c8
Show UBL Activate/Deactivate menu for current state ( #13744 )
2019-04-18 13:13:05 -05:00
Marcio Teixeira
08f21335a6
Fix bad opcode in LIGHTWEIGHT_UI; add 32-bit HAL and Due compatibility ( #13751 )
2019-04-18 13:10:58 -05:00
Kajetan Rzepecki
7c8ee0cd5b
Enable more ADC1 channels (pins 32-39) ( #13742 )
2019-04-18 13:01:24 -05:00
Bob-the-Kuhn
520585c5ed
Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x
2019-04-17 15:34:29 -05:00
Kajetan Rzepecki
e1acc09c6e
Fix LPC1768 HAL SSD* screen init ( #13741 )
2019-04-17 14:57:50 -05:00
Marcio Teixeira
836435c5ef
Fix action_edit int range bug ( #13737 )
2019-04-17 14:55:31 -05:00
Antonio Pérez
bf28ad4b6c
Fix clear of Z position last digit ( #13731 )
2019-04-17 14:52:20 -05:00
Marcio Teixeira
866e2d41dc
Correct range of LCD axis step editing ( #13727 )
2019-04-16 15:45:31 -05:00
Scott Lahteine
ab8052887f
Add missing MSG_PAUSE_PRINT_INIT_1 for en
2019-04-16 13:54:20 -05:00
petrzjunior
12d340cf2a
Update Czech language ( #13729 )
2019-04-16 13:53:14 -05:00
Robby Candra
e8dc87a2b7
Fix updated Allen Key pause probe logic ( #13723 )
2019-04-16 12:35:58 -05:00
Robby Candra
7ca1fea22b
Option to pause probe deployment only when triggered, for manually-deployed allen-key probe ( #13698 )
2019-04-16 01:32:43 -05:00
Robby Candra
35160dfb7a
Simplify PLR homing when Z homes to max ( #13718 )
2019-04-16 00:17:27 -05:00
Scott Lahteine
92ed9a2bb6
Fix is_M29
...
Followup for #13013
2019-04-15 23:47:06 -05:00
jmdearras
5f49b65c1f
Move LPC SD options to configs, add MKS_MINI_DISPLAY to SKR boards ( #13712 )
2019-04-15 22:55:33 -05:00
Bob Kuhn
9b578ca343
Support FYSETC_MINI_12864 on Re-ARM, RAMPS_FD, MKS SBASE ( #13717 )
2019-04-15 22:54:11 -05:00
Scott Lahteine
9992c424f5
Patch G92.9 flags
...
Followup to #13703
2019-04-15 20:26:40 -05:00
ManuelMcLure
b1c13bce58
Fix EEPROM_CHITCHAT (and debug_out.h) ( #13716 )
2019-04-15 20:21:26 -05:00
Msq001
455ee23499
Fix, improve Power Loss Recovery ( #13703 )
...
- Save and restore workspace offsets
- Add retract and purge (hidden) options
- Always restore axis relative modes
- Use added `G92.9` to do position restores
2019-04-15 18:53:39 -05:00
Laurent
df75a606ff
Support MKS SGen board ( #13694 )
2019-04-15 17:03:10 -05:00
Kajetan Rzepecki
20dc45bca7
Refactor, fix ESP32 WebSocketSerial ( #13689 )
2019-04-15 16:32:20 -05:00
Roman Moravčík
db373f130c
Update Slovak language ( #13692 )
2019-04-15 16:14:49 -05:00
Kajetan Rzepecki
6fe90f0324
Define I2S pins for ESP32 ( #13714 )
2019-04-15 16:13:59 -05:00
InsanityAutomation
aa0f7afbe6
Fix call to uninitialized PWM pin, heater 2 overlap ( #13674 )
2019-04-15 15:57:34 -05:00
Bob-the-Kuhn
57aaa9110b
Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x
2019-04-13 21:14:52 -05:00
Scott Lahteine
6a71df2925
Tweak babystep add_steps
2019-04-13 14:14:26 -05:00
Bob-the-Kuhn
9dd4252b39
Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x
2019-04-12 22:07:12 -05:00
Marcio Teixeira
bdfffee037
Modify Z-offset overlay for clarity ( #13660 )
2019-04-12 15:43:29 -05:00
Stephan
84273557f9
Move and update heated chamber settings ( #13671 )
...
Co-Authored-By: the-real-orca <stephan.veigl@gmail.com>
2019-04-12 15:38:10 -05:00
Ludy
62b4265410
Update German language ( #13665 )
2019-04-12 14:48:13 -05:00
Scott Lahteine
b18316dd37
Fix some spacing
2019-04-12 13:35:42 -05:00
Scott Lahteine
f2ba0a5ae7
Tweak some formatting
2019-04-12 13:15:37 -05:00
Scott Lahteine
7e58d33a2e
Update some headers
2019-04-12 13:04:04 -05:00
Giuliano Zaro
64ee064ded
Update Italian language ( #13661 )
2019-04-12 12:22:43 -05:00
Scott Lahteine
14b561f182
Extra AxisEnum values for E0-E5
2019-04-12 12:13:48 -05:00
Robby Candra
9e86fc3831
Require homing to toggle leveling ( #13652 )
2019-04-11 14:09:41 -05:00
Ludy
9fd3e64ba8
Fix compile error with EXTRUDER>1 ( #13651 )
2019-04-11 13:58:50 -05:00
Jamie
509dc283f2
Restore declarations of G53-G59 ( #13654 )
2019-04-11 13:51:05 -05:00
chai-md
2adc37becc
MAGNETIC_SWITCHING_TOOLHEAD ( #13629 )
2019-04-11 13:29:17 -05:00
ManuelMcLure
492883859e
Don't protect unused CS pins ( #13647 )
2019-04-10 21:57:57 -05:00
Scott Lahteine
9898f53361
Fix missing IS_SD_PRINTING
2019-04-10 21:48:16 -05:00
Scott Lahteine
1e59a2ac73
Hide pause/stop unless active printing
2019-04-10 19:46:59 -05:00
Scott Lahteine
ae42206500
Fix SD_REPRINT_LAST_SELECTED_FILE
2019-04-10 17:43:08 -05:00
Scott Lahteine
d72946a8d7
Fix LPC1768 build with no watchdog
...
Fix issue mentioned at https://github.com/MarlinFirmware/Marlin/pull/13587#issuecomment-481737509
2019-04-10 17:34:15 -05:00
Scott Lahteine
cee3b172b9
Fix Marlin splash screen logic ( #13646 )
2019-04-10 17:14:57 -05:00
ANMay-ru
052f2ac352
Fix RURAMPS4D baud rate ( #13644 )
2019-04-10 15:53:21 -05:00
Marcio Teixeira
e6ebd30f60
Fix LCD issue on stepper timeout ( #13630 )
...
- Remove a re-paint of the status screen on stepper timeout, which would cause a garbled LCD with `LIGHTWEIGHT_UI` and could interrupt whatever else the user might be doing in a submenu (such as playing games!)
- Use the helper function to reset stepper timeout.
2019-04-10 15:51:48 -05:00
klcjr89
a8edd4f6d4
Fix Azteeg X5 MINI BOARD_NAME ( #13632 )
...
Co-Authored-By: klcjr89 <klcjr89@users.noreply.github.com>
2019-04-10 15:46:12 -05:00
Scott Lahteine
5018fdacbe
Support FYSETC_MINI_12864_PANEL ( #13365 )
2019-04-09 18:34:29 -05:00
InsanityAutomation
4900c28bf6
Fix IDEX tool-change, and more ( #13614 )
2019-04-09 18:33:40 -05:00
InsanityAutomation
ba31d39f6d
Azteeg X5 Mini support ( #13425 )
2019-04-08 23:10:45 -05:00
Scott Lahteine
9cb5c57b84
Adjustments to ui8tostr_percent
2019-04-08 21:47:50 -05:00
Scott Lahteine
321a5e6580
Fix SD card reselect when scrolled ( #13624 )
...
- Change encoder position to 16-bit integer.
- Fix `SD_REPRINT_LAST_SELECTED_FILE` when the screen is scrolled.
2019-04-08 21:10:41 -05:00
Scott Lahteine
0e3c9e726d
Set default Raptor runout/caselight pins
2019-04-08 18:18:08 -05:00
Scott Lahteine
5e38d70697
Fix M217 report label, general cleanup
2019-04-08 18:18:08 -05:00
Scott Lahteine
fae2b7edc3
Update MMU2 code style
2019-04-08 18:13:42 -05:00
Scott Lahteine
c8a83fb122
SPINDLE_LASER_ENABLE => SPINDLE_LASER_ENA
2019-04-08 18:13:41 -05:00
Scott Lahteine
9abe9aff56
Confirm before starting SD print ( #13616 )
2019-04-08 13:44:35 -05:00
Scott Lahteine
7e0008f5b3
Fix SETCURSOR_RJ
2019-04-07 20:25:54 -05:00
Robby Candra
81c2c3ec11
Continuous filename scrolling ( #13609 )
2019-04-07 16:58:32 -05:00
Ludy
c29820f649
Suppress compile warning ( #13612 )
2019-04-07 16:53:30 -05:00
Bob Kuhn
9a56d90150
Fix M43 on LPC176x ( #13587 )
...
The real fix. PR #13568 was wrong.
2019-04-06 18:06:07 -05:00
Roxy-3D
9cee81d47e
Option to show babysteps total since G28 ( #13580 )
2019-04-06 18:04:34 -05:00
Scott Lahteine
028b78f623
Suppress a compile warning
2019-04-05 20:06:19 -05:00
Scott Lahteine
cf12fc8366
Expand on serial debugging ( #13577 )
2019-04-05 20:02:46 -05:00
Marcio Teixeira
bf7b28b456
Fix incorrect variable name ( #13585 )
2019-04-05 19:04:46 -05:00
Kajetan Rzepecki
27693cec29
Extend ESP32 HardwareSerial with flushTX. ( #13588 )
2019-04-05 19:04:02 -05:00
Alexander Gavrilenko
3c47e1b4d1
Support Black STM32F407VET6 with RAMPS-like shield ( #13524 )
2019-04-05 15:30:19 -05:00
VBen
0dfd76ba55
Fix Z hotend offset broken by parking extruder tool change ( #13582 )
2019-04-05 15:28:32 -05:00
Scott Lahteine
027a901bec
Trim whitespace
2019-04-05 15:04:23 -05:00
Kajetan Rzepecki
692a0198f9
Fix SPISettings frequency parameters in ESP32 HW SPI ( #13573 )
2019-04-04 23:17:14 -05:00
Kajetan Rzepecki
63d95862fa
Add FastIO TOGGLE for ESP32 ( #13574 )
2019-04-04 23:15:17 -05:00
drzejkopf
0992d1a4c8
Fix Invaders game compile error ( #13575 )
2019-04-04 23:13:11 -05:00
Robby Candra
cd1ef33c8c
Drop extra PLR save test ( #13554 )
2019-04-04 22:47:00 -05:00
Scott Lahteine
72c7751768
Fix SERIAL_POS in use with DEBUG_OUT
2019-04-04 22:12:03 -05:00
Scott Lahteine
cacec5764a
Clean up whitespace
2019-04-04 22:12:02 -05:00
Scott Lahteine
83e214478e
Click-hold to exit Invaders, fix Brickout compile
2019-04-04 17:07:50 -05:00
Scott Lahteine
240ea1bbb3
Split up games into separate files
2019-04-04 03:06:19 -05:00
Marcio Teixeira
27a4927ed1
Add option to move away from endstop after homing. ( #13557 )
...
Add option to move away from endstop after homing.
- Add `ENDSTOP_BACKOFF` for printers with a recessed Z home button (Lulzbot TAZ 6).
- Also prevents chattering when sensorless homing with axes against bumpers.
2019-04-04 02:47:19 -05:00
InsanityAutomation
d44e5b1fde
Fix stepper direction macros, multi-nozzle scope ( #13569 )
2019-04-04 02:44:07 -05:00
Scott Lahteine
10b9632bed
Fix menu history item selection
2019-04-04 02:41:23 -05:00
Scott Lahteine
f1810689ff
Fix bootscreen condition
2019-04-04 00:19:47 -05:00
Kajetan Rzepecki
b21ca53dfc
SPIFFS-backed PersistentStore for ESP32 ( #13566 )
2019-04-03 20:28:26 -05:00
Scott Lahteine
af92ee9dd6
No PLR include needed in queue.cpp
2019-04-03 18:26:31 -05:00
Scott Lahteine
5d2c5877f7
DOGM bootscreen cleanup
2019-04-03 18:10:50 -05:00
Scott Lahteine
2aa35e95af
More G26 arc cleanup
...
Followup to #13531
2019-04-03 16:03:21 -05:00
Scott Lahteine
20a41e2f7b
SDCARD_RATHERRECENTFIRST with SDCARD_SORT_ALPHA
2019-04-02 22:25:18 -05:00
Robby Candra
46445a5a16
Event G-code for Stop SD Print ( #13547 )
...
Co-Authored-By: 7eggert <7eggert@gmx.de>
Co-Authored-By: robbycandra <robbycandra.mail@gmail.com>
2019-04-02 22:09:30 -05:00
Kajetan Rzepecki
2cfa9e9008
Fixed chamber-related compile error ( #13552 )
2019-04-01 17:53:56 -05:00
Scott Lahteine
a0a5c31c05
Power-Loss initialization fix ( #13553 )
...
- Only save to PLR file on moves with E and X or Y
- Save to PLR after any long-ish Z downward move
2019-04-01 17:52:45 -05:00
Scott Lahteine
8b7c3eec83
Games, for fun (and stress-testing) ( #13464 )
2019-04-01 17:48:54 -05:00
InsanityAutomation
fbc7b51a24
Use NO_FETCH for Dual X G28 ( #13539 )
2019-04-01 17:48:21 -05:00
Scott Lahteine
5de7b5b35e
Games, for fun (and stress-testing) ( #13464 )
2019-04-01 15:43:48 -05:00
InsanityAutomation
4961d8aa3e
Update G28.cpp ( #13539 )
2019-03-31 19:50:40 -05:00
Scott Lahteine
de0046fc8b
Fix empty HAS_TIMER macros
2019-03-30 23:04:40 -05:00
Kajetan Rzepecki
c9079165ee
Fix MAX6675 readout with Hardware SPI ( #13530 )
2019-03-30 22:31:49 -05:00
ManuelMcLure
04086fc455
Minor optimization to ARC_SUPPORT code ( #13531 )
2019-03-30 22:29:37 -05:00
Robby Candra
a3f67acd6d
Fix Power Loss Recovery file delete ( #13522 )
2019-03-30 13:14:58 -05:00
Marcio Teixeira
d992dfe7d5
Use the percent util func in the string func. ( #13523 )
2019-03-30 13:00:31 -05:00
drzejkopf
b1f739e27b
CR10_STOCKDISPLAY support in Bigtreetech SKR ( #13516 )
2019-03-29 14:19:18 -05:00
Marcio Teixeira
5679fae11e
UltraLCD enhancements (lower fan resolution, backlash menu) ( #13519 )
2019-03-29 14:07:43 -05:00
Msq001
f0d14b83bc
Save/restore Relative modes in Power-Loss Recovery ( #13501 )
2019-03-29 13:40:42 -05:00
Marcio Teixeira
c6466c23fe
Silence signed/unsigned comparison warning. ( #13508 )
2019-03-29 13:33:45 -05:00
InsanityAutomation
7240e3a68f
Allow G26 with no heated bed ( #13511 )
2019-03-29 13:32:43 -05:00
Alexander Gavrilenko
6d9aaca082
Fix compilation error for MKS Robin ( #13506 )
2019-03-29 12:40:24 -05:00
Scott Alfter
c6dbe6e9d6
Fix Teensy 3.5/3.6 __get_primask ( #13514 )
2019-03-29 12:23:09 -05:00
Alexander Amelkin
e40636a7c1
Replace digitalPinHasPWM with HAS_TIMER ( #13520 )
2019-03-29 12:21:14 -05:00
Scott Lahteine
b46ca9aa94
Less timely comment, tweak conditions
2019-03-26 19:20:13 -05:00
InsanityAutomation
eb91f08725
Update descriptions and dont call unneeded functions
2019-03-26 11:24:52 -04:00
Ludy
fe346cd4d1
Fix DEBUG_EEPROM_READWRITE compile error ( #13492 )
2019-03-26 04:12:22 -05:00
Sam Lane
e3ab54753b
Add extra Linear Advance factors ( #13490 )
2019-03-26 04:02:27 -05:00
Chris Pepper
ffc2c2d7c5
Move FAST_PWM_FAN code to HALs ( #13491 )
2019-03-26 01:03:23 -05:00
Thomas Moore
263f8edff8
Disable volumetric extrusion during G26 ( #13479 )
2019-03-25 22:41:52 -05:00
Bob Kuhn
6bd0a0be97
Relocate DUE Stepper ISR to TC0,2 ( #13481 )
2019-03-25 22:39:51 -05:00
Thomas Moore
13a12f8a87
Fix UBL mesh editor on delta ( #13478 )
2019-03-25 22:04:57 -05:00
Marcio Teixeira
7462fe3068
Fix compile error, squelch warnings ( #13487 )
...
- Fix path to `bedlevel.h` include file
- Add default to `case` statements to suppress warnings
2019-03-25 20:41:38 -05:00
Yannik Sembritzki
0d3ea59bcf
Add pins for Dual Z UART on SKR 1.3 ( #13474 )
...
Fix #13470
2019-03-24 20:09:00 -05:00
pinchies
ef3b93daa1
Fix STM32F1 SD-based EEPROM emulation ( #13475 )
...
If `openFile` is given `true`, then it has read-only access. Because all the writing occurs on the next line, this breaks SD card as EEPROM.
2019-03-24 20:07:31 -05:00
Chris Pepper
aacc1148b0
Fix M106 for index > extruders ( #13473 )
2019-03-24 20:03:53 -05:00
Thomas Moore
c5e96544b5
Fix vtool compiler warning ( #13476 )
2019-03-24 20:02:28 -05:00
Thomas Moore
02dc72acb6
Disable ABL when leveling corners ( #13471 )
2019-03-24 20:01:18 -05:00
7eggert
d96f7d6068
Minimum segments for G2/G3. Better for small arcs. ( #13466 )
2019-03-24 19:53:47 -05:00
Scott Lahteine
380c771988
Handle word-padded flash-based eeprom (STM32F1)
...
Fix #13445
2019-03-24 19:14:04 -05:00
Scott Alfter
32332bcd03
Proceed with Teensy 3.5/3.6 HAL ( #13450 )
2019-03-24 00:08:32 -05:00
Scott Alfter
407202cc0f
Fix BLTouch pre-3.0 compatibility ( #13454 )
2019-03-23 23:28:15 -05:00
Marcio Teixeira
a0ca98f699
Additional ExtUI features ( #13449 )
2019-03-23 23:09:18 -05:00
Sam Lane
a8fa275dc6
Fix Fan 0 responding to all fan speeds ( #13444 )
2019-03-23 23:00:31 -05:00
InsanityAutomation
5eeffab5e5
Fix BLTouch Menus ( #13441 )
2019-03-23 22:58:34 -05:00
Scott Lahteine
d8329d858d
Default argument to defer_status_screen
2019-03-23 16:33:37 -05:00
Giuliano Zaro
9562a02c5a
Update Italian language ( #13440 )
2019-03-20 18:26:55 -05:00
drzejkopf
70e6a3db8a
Add LEVEL_CORNERS_HEIGHT to LEVEL_BED_CORNERS ( #13439 )
2019-03-20 18:26:12 -05:00
Roman Moravčík
f3cf95a937
Update Slovak language. ( #13435 )
2019-03-20 16:37:34 -05:00
Scott Lahteine
144018736a
Use USES_Z_MIN_PROBE_ENDSTOP
2019-03-18 16:58:31 -05:00
InsanityAutomation
5b2c37d6c1
Followup to BLTouch ( #13422 )
2019-03-18 16:31:11 -05:00
InsanityAutomation
3fb8489ae3
EXTUI and UBL compilation fixes ( #13420 )
2019-03-17 07:57:54 -05:00
Scott Lahteine
b376c7e374
Group DISABLED items
2019-03-17 07:56:35 -05:00
Scott Lahteine
58bca67883
Unify status scrolling further
2019-03-17 07:56:35 -05:00
Scott Lahteine
c4443f885e
finishstatus => finish_status
2019-03-17 07:56:35 -05:00
InsanityAutomation
691e5c3bb8
BLTouch V3.0 support ( #13406 )
2019-03-17 05:57:25 -05:00
Scott Lahteine
49cf92dc36
Extended condition macros ( #13419 )
...
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
2019-03-16 23:43:06 -05:00
Tobias Frost
d20eab4f83
Fix macro in set_color() ( #13417 )
2019-03-16 19:05:59 -05:00
Ludy
59353546e8
Fix BUTTON_EXISTS and misplaced comma ( #13411 )
...
Fixes #13410 and redeclaration of `BUTTON_EXISTS`
2019-03-16 11:59:12 -05:00
InsanityAutomation
09eb30dc05
IDEX Mirror mode based on Formbot / Vivedino Symmetric mode ( #13404 )
2019-03-15 22:46:27 -05:00
Scott Lahteine
5c1aa5162d
Adjust M206 output in M503 for DELTA
2019-03-15 19:20:40 -05:00
Scott Lahteine
ad8b82d054
Fix KILL_PIN assignment for MKS_MINI_12864
...
According to #13397
2019-03-15 19:20:40 -05:00
Scott Lahteine
3a916b4ef2
Create bresenham.h
2019-03-15 19:20:39 -05:00
Karl Andersson
5d3928cb01
PWM is not defined on Arduino Core STM32 ( #13405 )
2019-03-15 19:14:06 -05:00
Scott Lahteine
9a515cbd32
Fix Pause Print message and behavior ( #13394 )
2019-03-14 02:26:07 -05:00
Scott Lahteine
f5bcc00570
Unify debugging output with debug_out.h ( #13388 )
2019-03-14 02:25:42 -05:00
Andrei Pozolotin
cc8a871705
Add capability string CHAMBER_TEMPERATURE ( #13391 )
...
Reference: #13380
2019-03-13 18:09:22 -05:00
Scott Lahteine
67bee06e43
No patch needed for non-libmaple analogWrite
...
See https://github.com/pinchies/Marlin/pull/1#issuecomment-471388743
2019-03-13 07:21:10 -05:00
Scott Lahteine
f89b375fb9
Fixes and improvements for PWM pins ( #13383 )
2019-03-13 06:51:15 -05:00
Scott Lahteine
87162658c4
Fix and improve software endstops ( #13386 )
2019-03-13 05:48:36 -05:00
Scott Lahteine
6214c997c0
Remove includes of <binary.h>
2019-03-13 05:32:33 -05:00
Scott Lahteine
4555ae448f
Fixups for ESP32
2019-03-13 05:32:33 -05:00
Scott Lahteine
a5ea3e2f15
Fix hotend offset on switching toolhead change
...
See commentary at #11623
2019-03-13 05:32:21 -05:00
jmz52
8e0ac93d60
Fix 'UNUSED redefined' compiler warning ( #13387 )
2019-03-13 04:34:02 -05:00
Hadrien Jouet
0278ad0a6d
Add ESP32 WiFi interface ( #11209 )
2019-03-13 00:48:08 -05:00
InsanityAutomation
c03df89921
ExtUI Mesh Leveling Extensions ( #13363 )
2019-03-13 00:45:52 -05:00
InsanityAutomation
050eac03af
Single X Duplication Extension ( #13373 )
...
* Multi-nozzle selective duplication
* Use a bit-mask, reduce stepper_indirection.h size
* Tweak the multi-nozzle duplication description
* Use 'S' as a bool in M605
* Add HAS_DUPLICATION_MODE conditional
* Remove '_MODE' from the option name
* M605 in the style of Stacker M280
* Also include direct mask style (P)
2019-03-13 00:42:50 -05:00
Scott Lahteine
ad91476d26
Fix USEABLE_HARDWARE_PWM
2019-03-13 00:12:46 -05:00
Scott Lahteine
d63da4592d
Tweak to SCARA_move_to_cal
2019-03-12 22:06:50 -05:00
Scott Lahteine
51ff5b68fa
Clean up fastIO ahead of PWM patch
2019-03-12 20:39:55 -05:00
Scott Lahteine
388babbcea
Tweak SERIAL_PRINTF
2019-03-11 20:58:27 -05:00
Scott Lahteine
d94e077901
Apply HAS_HOTEND_OFFSET where needed
2019-03-11 20:58:27 -05:00
Scott Lahteine
11d6a939df
Always define axis_unhomed_err
2019-03-11 20:58:27 -05:00
7eggert
10c8c034bd
Allow both encoder and ADC keypad ( #13355 )
2019-03-11 18:10:56 -05:00
Scott Lahteine
0375e92847
Followup to serial rework
...
As mentioned in #13370
2019-03-11 16:46:04 -05:00
jmz52
013bb469ca
Fix compilation for STM32F1 with no SDIO ( #13366 )
2019-03-11 16:40:51 -05:00
Scott Lahteine
e52bcc9408
Limit top bed temp to BED_MAXTEMP - 10
...
The chances of a 10° overshoot is pretty minimal.
2019-03-11 16:32:34 -05:00
InsanityAutomation
785a7028bf
Followup to 'volatile' patch ( #13369 )
...
Originally #13344
2019-03-11 15:01:57 -05:00
Scott Lahteine
aa1d587128
Some LCD code cleanup
2019-03-11 05:07:31 -05:00
Scott Lahteine
fa11427ec6
Remove obsolete LCD_CONTRAST
2019-03-11 03:33:07 -05:00
pinchies
4df9509ead
Add support for printers with inverted fan pins ( #13362 )
...
Add support for printers with inverted fan pins by adding `#define FAN_INVERTING 1` to `Configuration_adv.h` and modifying the fan write macros.
2019-03-10 20:51:21 -05:00
Scott Lahteine
1f7e220387
Make HAL ISR macros function-like
2019-03-10 20:44:27 -05:00
Scott Lahteine
e3ce346f24
Report position to host in Nozzle::park
2019-03-10 19:09:28 -05:00
Scott Lahteine
77b4176152
Use lib include for bit_constants.h
2019-03-10 19:09:28 -05:00
Scott Lahteine
3419099f0a
Clean up whitespace
2019-03-10 19:09:28 -05:00
pinchies
4c43e6c48b
Fix "spontaneous heating" issue (WRITE bug) on STM32 ( #13356 )
...
Should fix "spontanous heating" problems due to order of operations error. Error occurs at least with ststm32 v5.1.0 in PlatformIO.
2019-03-10 17:25:54 -05:00
Michiel Baird
b824a517aa
Add G38.4 and G38.5 ( #13348 )
2019-03-10 17:22:09 -05:00
Bruce j Beare
e4d080e63c
Reset after kill with a button on the KILL_PIN ( #13091 )
2019-03-10 09:57:38 -05:00
MoellerDi
c36989c39e
Fix chamber temperature measurement ( #13350 )
2019-03-10 09:51:13 -05:00
Scott Lahteine
12503fce06
Followup to wait_for_user fix
2019-03-10 09:14:02 -05:00
Scott Lahteine
33a08fc6f7
Fix typos from temperature rework
...
Followup to #12201
2019-03-10 08:28:16 -05:00
Tobias Frost
2efbcc90c5
Fix wait_for_user compile error ( #13352 )
2019-03-10 08:07:41 -05:00
Tobias Frost
60e82e3929
Send notifications to ExtUI for M0/M1 ( #13344 )
...
- Send notifications to ExtUI for M0/M1
- wait_for_user can be non-volatile (not changed by interrupt)
C / C++ compilers don't optimize away reads of non-volatile variables when a function call is used between accesses, because *any* variable could be changed by the function call. Since `wait_for_user` can't be changed without a function call, it should be non-volatile so the compiler can optimize away cases where it is read more than once without an intervening function call.
2019-03-09 14:20:37 -06:00
Marcio Teixeira
00fc43144a
Follow up fixes to various PRs. ( #13334 )
...
- Ensure `MarlinUI:get_progress` is defined for `ExtUI`.
- Fix for `BACKLASH_SMOOTHING` with small segments.
`BACKLASH_SMOOTHING` with extremely small segments failed to fully correct due to the correction factor being rounded down. Rounding up ensures the entire backlash will converge to zero even for small segments.
- Add pinout for the beta revision `EINSY_RETRO`.
- Update soft endstops with tool offsets (for toolchange et. al. move clamping) (#12568 )
2019-03-09 14:20:37 -06:00
Scott Lahteine
c7d618b4d9
Fix SERIAL_ECHOLNPAIR
...
Fix #13333
2019-03-09 14:20:37 -06:00
InsanityAutomation
d54741eda8
Update some G26 plausible values. Add speed control. ( #13330 )
2019-03-08 03:13:44 -06:00
Msq001
fb3302feda
Fix STM32F1 Serial and ADC pins ( #13331 )
2019-03-08 02:21:32 -06:00
Reece Kibble
dbead66988
Allows user to set (almost) any PWM frequency ( #12638 )
2019-03-08 02:15:42 -06:00
Tobias Frost
afbec5ff7e
Have ExtUI::getProgress use ui.get_progress ( #13328 )
2019-03-07 18:00:38 -06:00
3dlabsio
645ca7af7a
M141 Heated Chamber, Temperature rework ( #12201 )
2019-03-07 02:09:39 -06:00
Scott Lahteine
44571775bd
Further support for 6 extruders
2019-03-07 01:00:56 -06:00
Scott Lahteine
893ee68b52
Clean up trailing whitespace
2019-03-06 01:02:43 -06:00
Scott Lahteine
39f1222060
One fewer G29 error string
2019-03-05 23:04:52 -06:00
Scott Lahteine
cfdb38eda4
Allow SERIAL_ECHOPAIR to take up to 12 pairs ( #13311 )
2019-03-05 06:46:19 -06:00
Scott Lahteine
4771e372a1
Update criteria for PAUSE/RESUME/STOP menu items ( #13294 )
2019-03-05 06:46:06 -06:00
Tobias Frost
56fdcf93d1
Disallow SD_DETECT_INVERTED with FYSETC F6. ( #13307 )
2019-03-05 06:45:28 -06:00
Tobias Frost
7ce13a6ec1
Fix a print_job_timer compile error ( #13304 )
2019-03-05 06:39:15 -06:00
Tobias Frost
6df51201ae
Include EXTENSIBLE_UI in single LCD sanity check ( #13306 )
2019-03-05 06:33:36 -06:00
Scott Lahteine
2e5a3b01fd
Save Power Loss Recovery only on move commands
2019-03-05 02:43:29 -06:00
Scott Lahteine
15738ea506
Update a motion comment
2019-03-05 00:50:29 -06:00
Scott Lahteine
bc87e97357
Prevent a tool change move out of bounds
2019-03-05 00:50:29 -06:00
Scott Lahteine
2212da453a
Distinguish between analog/digital auto fans ( #13298 )
2019-03-05 00:41:31 -06:00
Chris Pepper
2513f6b550
Fix multiport G28 with Binary Transfer ( #13308 )
2019-03-04 16:44:54 +00:00
Chris Pepper
38bef9da91
Report auto temp to both serial ports, if available ( #13301 )
2019-03-03 21:03:48 -06:00
Robert Mendon
367d392880
Init stepper current after stepper pins are set up ( #13302 )
2019-03-03 20:58:02 -06:00
InsanityAutomation
bf8b38e0f7
Relocate configs above Marlin/src folder ( #13299 )
2019-03-03 16:50:56 -06:00
Scott Lahteine
d71dc5cf42
Fix for Ender 4 fan/case light pin
...
See #12731
2019-03-03 07:43:27 -06:00
Anthony Rich
7640b328df
Support for Tronxy X5S 2e ( #13297 )
2019-03-03 07:41:05 -06:00
Scott Lahteine
599cdc3f0f
Remove dead code from get_pid_output
...
See #12981
2019-03-03 05:45:20 -06:00
Scott Lahteine
35ae5daf2d
Split up sdcard G-codes
2019-03-03 01:52:15 -06:00
Scott Lahteine
3f36a38512
Clean up some pre-serial-redirect includes
2019-03-03 01:52:15 -06:00
Scott Lahteine
fa0d909dd3
Add FIL_RUNOUT_PIN for BIGTREE_SKR_V1.3
...
See #13267
2019-03-03 00:27:47 -06:00
Ludy
bd4160dbaf
Unused CS_ACTUAL_sb ( #13282 )
2019-03-02 17:30:30 -06:00
Vasily Evseenko
71773b128d
Fix stepper use before init. Add Ultimaker2+ Extended clone config ( #13284 )
2019-03-02 17:29:02 -06:00
Scott Lahteine
edc4e037c4
Add a note to G10
2019-03-02 17:19:36 -06:00
Tobias Frost
57afd0ab37
Fix range check bug in FileList::seek() ( #13286 )
...
When `count()` returns 0, `pos > (count()-1)` will always yield `true` due to integer underflow.
2019-03-02 16:43:08 -06:00
kAdonis
05c2f80826
Fix bug in wait-for-heatup ( #13290 )
2019-03-02 16:29:10 -06:00
Chris Pepper
b0553d2d97
Add M997 support and simple implementation for LPC176x ( #13281 )
2019-03-01 20:11:50 -06:00
Scott Lahteine
fa236e9718
General cleanup ahead of L64XX
2019-03-01 19:58:07 -06:00
Scott Lahteine
2f1e1dcb42
Gradual step towards EXTRUDERS 0 support
2019-03-01 01:51:24 -06:00
Scott Lahteine
99d0022fae
Drop the Z_MIN_PROBE_ENDSTOP option ( #13276 )
2019-03-01 00:27:45 -06:00
Scott Lahteine
9a6b90f47d
TMC2660.h comment tweaks
2019-03-01 00:25:22 -06:00
Scott Lahteine
a2e3226597
Init XYZ to configured home position
2019-02-28 22:10:26 -06:00
Scott Lahteine
4fbbce9a35
Marlin Dev Mode for DOGM status screen
2019-02-28 22:10:26 -06:00
InsanityAutomation
e2e2a55d9b
Add thermistor type 67 SliceEng ( #13275 )
2019-02-28 19:44:17 -06:00
Msq001
5b7ad3a5a0
Fix SKR onboard TF card CS pin ( #13272 )
2019-02-28 19:41:19 -06:00
Scott Lahteine
7fde3ed915
Skip hysteresis check when temp is already close to target
...
To eliminate a long delay during pause, park, and filament change
2019-02-28 14:35:19 -06:00
Chris Pepper
7de6476b3d
Fix binary protocol error
2019-02-28 02:31:42 +00:00
Scott Lahteine
2c10222e87
card.transfer_port => transfer_port_index
2019-02-27 20:14:17 -06:00
Chris Pepper
4ab433d391
Fix binary protocol with one serial port ( #13270 )
...
- The `sdcard.transfer_port` variable is Marlin's internal serial port index, not the physical serial port number.
- Added packet number to "ok" response so hosts don't need to wait for the ACK.
- Renamed feature to `BINARY_FILE_TRANSFER`, as the speed up is only consequential to the ability to transfer binaries over serial.
2019-02-27 19:57:48 -06:00
InsanityAutomation
eb4bf93ea4
Add more Babystep options ( #13262 )
2019-02-27 04:38:56 -06:00
Scott Lahteine
f37df28d17
UBL G29 T current position fix
...
Counterpart to #12845
2019-02-26 22:25:53 -06:00
Msq001
f8a39919fa
Add Bigtree SKR 1.3 board ( #13267 )
...
Co-Authored-By: Msq001 <msq001@users.noreply.github.com>
2019-02-26 21:30:00 -06:00
