Commit Graph

2485 Commits

Author SHA1 Message Date
Scott Lahteine
e3ca9137b5 Fix missing temp_error declarations
- Fix for #1591 replacing #1595
2015-03-11 16:38:42 -07:00
Scott Lahteine
08694339eb Merge branch 'Development' into marlin_configurator
Conflicts:
	Marlin/Configuration.h
2015-03-11 15:47:32 -07:00
Scott Lahteine
e4d77a6313 Merge pull request #1554 from 2PrintBeta/Development
Macro indirection for stepper drivers + Support for TMC26X and L6470 Stepper Drivers
2015-03-11 15:31:57 -07:00
Mehmet Sutas
b373826428 Merge pull request #2 from MarlinFirmware/Development
update
2015-03-12 00:07:39 +02:00
alexborro
c0b6075f77 Fix max acceleration limits in planner
The max acceleration limiting was in wrong place.
2015-03-11 15:08:11 -03:00
Bo Herrmannsen
c7067edddf initial empty change log 2015-03-11 18:56:46 +01:00
alexborro
9157cbd8f3 Add Travel Acceleration and change the M204 options
Added option to set Travel Acceleration (non printing moves).
The M204 options was a non sense (S for printing moves and T for retract
moves).

It has been changed to:
P = Printing moves
R = Retract only (no X, Y, Z) moves
T = Travel (non
printing) moves

I will add this info o G-Code wiki in reprap.org. I also advise to put
this info in Marlin next version changelog.
2015-03-11 13:19:02 -03:00
alexborro
888cf161bd fix travel speed option for G29
I forgot to enclousure the variable with #ifdef
2015-03-11 10:03:32 -03:00
alexborro
af63b54562 Add travel speed option to G29 command line 2015-03-11 09:51:56 -03:00
Bo Herrmannsen
749e5b9b84 updated milestone link 2015-03-11 10:30:03 +01:00
Bo Herrmannsen
33fe89f539 removed irc archive link
removed the link as the software i had did not work, nor does anyone hardly use irc chat but just hang out there
2015-03-11 10:24:56 +01:00
alexborro
5bf42066fa Fix typo in configuration.h 2015-03-10 15:06:34 -03:00
alexborro
8a4b62d081 Set more regular setup in configuration.h 2015-03-10 14:41:21 -03:00
alexborro
60ceca1bc1 Add speed configuration for home-bumping movement 2015-03-10 14:08:32 -03:00
domonoky
d813090d90 Merge remote-tracking branch 'remotes/upstream/Development' into Development
Conflicts:
	Marlin/Marlin_main.cpp
	Marlin/stepper.cpp
2015-03-10 10:46:37 +01:00
Scott Lahteine
c321c97f35 Merge pull request #1584 from galexander1/stringcleanup
fix a handful of cases where strtod() was cast to int, instead of just using strtol()
2015-03-10 01:48:30 -07:00
maverikou
53abc5e2f1 Merge branch 'Development' into delta_auto_bed_level 2015-03-09 22:28:57 +02:00
Mehmet Sutas
956fb2d278 Merge pull request #1 from MarlinFirmware/Development
update
2015-03-09 11:05:49 +02:00
Scott Lahteine
978dadf806 Base64 decode AJAX-fetched text properly 2015-03-08 21:54:17 -07:00
Scott Lahteine
0eae9c24bc Merge pull request #1582 from galexander1/deltaconftypo
fix typo in delta example config introduced in commit 697ee2d
2015-03-08 21:13:14 -07:00
Scott Lahteine
624f23f550 Merge pull request #1575 from Wurstnase/fix-controllerFan
Fix controller fan
2015-03-08 20:36:38 -07:00
maverikou
424c747fb3 Enable M401 and M402 for deltas with allen key z-probes. 2015-03-08 09:57:38 +02:00
maverikou
0d593ab7c1 Fix debug message 2015-03-08 09:41:31 +02:00
Greg Alexander
ed7874b4e0 M404 should not use 'N' address as parameter because 'N' is reserved for the line number 2015-03-07 17:35:06 -05:00
Greg Alexander
b9dfa5cad4 use code_value_long() instead of (int)code_value() 2015-03-07 17:33:15 -05:00
Greg Alexander
901b03d020 use strtol() instead of strtod() when an integer value is desired 2015-03-07 17:24:26 -05:00
Greg Alexander
4fba7b084f fix typo in delta example config introduced in
commit 697ee2dc50
2015-03-07 16:43:41 -05:00
Mehmet Sutas
cfc6a3a87a Filament Runout Sensor Feature
With this change a mechanical or optical switch may be used to check the
availability of the filament and when the filament runs out an M600
(filament change) command is issued. This is only done while printing
with an SD card.

This feature was requested several times (issue #679), but the requests
were not accepted since it was believed that this situation should be
handled at host side. However during an SD print the control is totally
on firmware and I think that during an SD print it should be handled by
the firmware.

The original code was posted at reprap forum
(http://forums.reprap.org/read.php?1,297350) by Lazymonk. I have only
corrected some bugs of the code and improved it by adding definitions to
the configuration.h in order to make it more standardized.
2015-03-07 22:43:15 +02:00
maverikou
e6862700af Add Z_RAISE_AFTER_PROBING to all config files 2015-03-07 20:55:30 +02:00
maverikou
39d255608d Test an extra delta configuration with auto bed leveling code paths 2015-03-07 20:53:23 +02:00
maverikou
7c24b97958 Ported over Johann Rocholl's improvements for delta printers:
- Nonlinear auto bed leveling code (includes G29, G30, Z_RAISE_AFTER_PROBING). Cleaned it up to be a delta-specific AUTO_BED_LEVELING_GRID code path.
- Allen key z-probe deployment and retraction code. Cleaned it up and added safety checks.
2015-03-07 20:36:21 +02:00
Wurstnase
a5342c942e Update Marlin_main.cpp 2015-03-07 16:47:53 +01:00
Scott Lahteine
0f3b7d5575 Update annotated configurations
- Also update base configs
2015-03-07 01:07:40 -08:00
Scott Lahteine
c5aa56bc4d Merge branch 'Development' into marlin_configurator
Latest upstream commits
2015-03-06 23:00:03 -08:00
Scott Lahteine
9dccd3a94f Merge pull request #1579 from thinkyhead/fix_abl_issues
More sanity-checking for ABL
2015-03-06 22:50:03 -08:00
Scott Lahteine
d085725c86 More sanity-checking for ABL
- Moved sanity-checks to Marlin_main.cpp
- Applied to other configuration files
- Fixed formatting of ABL output
- Passing verbose level to probe_pt
- Miscellaneous cleanup
- Put CONFIG_STEPPERS_TOSHIBA into Configuration.h
2015-03-06 22:14:34 -08:00
Scott Lahteine
8b6766b37b Merge branch 'Development' into marlin_configurator
Latest upstream changes
2015-03-06 16:32:57 -08:00
Scott Lahteine
ca4b36deda Merge pull request #1578 from thinkyhead/require_lcd_style
Make sure a ROM is selected for ULTRA_LCD
2015-03-06 15:38:24 -08:00
Scott Lahteine
9eed8c8cf0 Make sure a ROM is selected for ULTRA_LCD 2015-03-06 15:37:54 -08:00
Scott Lahteine
254970c92a Merge pull request #1570 from C-o-r-E/escape_fix
Fixes gCode handling of comments and escaped characters
2015-03-06 15:09:35 -08:00
Scott Lahteine
d3660d22ae Merge pull request #1577 from thinkyhead/fix_gcode_g29
Fix compile error in gcode_G29
2015-03-06 14:55:05 -08:00
Scott Lahteine
25dc79f124 Remove M48 credits also 2015-03-06 14:54:30 -08:00
Scott Lahteine
34e51f576f Fix compile error in gcode_G29
- A redo of #1576, which missed topo_flag
- Always set verbose_level
2015-03-06 14:52:05 -08:00
Scott Lahteine
bbeb1117d4 Merge pull request #1572 from Wackerbarth/Issue1572
Minor typos in the README
2015-03-06 10:10:40 -08:00
Scott Lahteine
344a12bd10 Merge pull request #1571 from AnHardt/Undubble
Undubble MSG_MIN & MSG MAX
2015-03-06 10:08:19 -08:00
Scott Lahteine
1149c24b86 More grouping, cleanup, start on overrides 2015-03-06 08:48:53 -08:00
Wurstnase
62bd734612 fix controllerFan() for inverted enable pins
add ```^ !(n_ENABLE_ON)``` for each stepper
2015-03-06 12:01:17 +01:00
Richard Wackerbarth
fd9beb1672 Minor typos in the README 2015-03-05 22:03:21 -06:00
AnHardt
3024f6c706 Undubble MSG_MIN &MSG MAX 2015-03-06 00:25:44 +01:00
Corey C
ba27f90e36 Merge pull request #1 from foosel/C-o-r-E-escape_fix
In-line comments and escaping fixed by foosel
2015-03-05 17:50:41 -05:00