bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
9,877 Commits 1 Branch 4 Tags 151 MiB
88b6a15b47
Commit Graph

1250 Commits

Author SHA1 Message Date
Thomas Moore
8afc4f8d9d Fix UBL compilation warnings 2018-01-02 21:00:06 -06:00
Bob-the-Kuhn
eca5cc8669
Merge pull request #9003 from Bob-the-Kuhn/Due-PINS_DEBUG-&-related 
[2.0.x] add Due PINS_DEBUG support & misc improvements (replaces PR #8990)
 2018-01-02 18:47:53 -06:00
Bob-the-Kuhn
e9fc7bc69c
Merge pull request #9000 from Bob-the-Kuhn/2.0-LCD-contrast 
[2.0.x] lcd_contrast type mismatch work around
 2018-01-02 18:46:31 -06:00
Bob-the-Kuhn
5574fad69c copy of PR #8991 code 
Formatting tweaks

correct array initialization & remove test code
 2018-01-02 11:17:46 -06:00
Scott Lahteine
d190c702de
Add MKS_BASE Microstepping pins 
Based on #9008
 2018-01-01 18:49:21 -06:00
Scott Lahteine
5e01ee8adf Temperature updates for parity with 1.1.x 2018-01-01 18:29:08 -06:00
Bob-the-Kuhn
adb9ecf3cc copy of PR #8990 2018-01-01 16:11:56 -06:00
Roxy-3D
39e5fabfa9
Z BabyStepping should not be dependent on a bed leveling system being active 2018-01-01 14:46:50 -06:00
Bob-the-Kuhn
ef911a2d12 works 2018-01-01 14:35:16 -06:00
Scott Lahteine
d80c4f1a6e Fix typo in delta call to buffer_line 
Fix #8901
 2017-12-31 01:40:07 -06:00
Scott Lahteine
9312ee63b0
Merge pull request #8979 from thinkyhead/bf2_sync_up_configs 
[2.0.x] Synchronize configs with 1.1.x
 2017-12-31 01:15:43 -06:00
Scott Lahteine
41dfb229ec
Merge pull request #8978 from thinkyhead/bf2_slimming_option 
[2.0.x] SLIM_LCD_MENUS option
 2017-12-31 00:56:29 -06:00
Scott Lahteine
3dd04736c0
Update M17_M18_M84.cpp 2017-12-31 00:26:45 -06:00
Scott Lahteine
2929c9e56f A specific option to SLIM_LCD_MENUS 2017-12-31 00:11:22 -06:00
Scott Lahteine
10edb469bb Apply SLIM_LCD_MENUS to example configs 2017-12-31 00:11:21 -06:00
Scott Lahteine
5294fd132f
Merge pull request #8924 from ejtagle/bugfix-2.0.x 
[2.0.x] Improve SW SPI for DUE a bit more
 2017-12-30 23:32:46 -06:00
Scott Lahteine
0b4a46fa6c Bring configs up to date with 1.1.x 2017-12-30 23:28:53 -06:00
Scott Lahteine
7cc2193bce
Add Tronxy X1 example config (#8972) 2017-12-30 17:25:31 -06:00
etagle
729a9f55fc Improved Sw SPI on DUE HAL a bit more. 
Now the USB MSD can transfer at 750k/s. Previously, it was 500k/s. I think this is the maximum achievable speed using Sw SPI.
 2017-12-30 17:24:38 -06:00
Scott Lahteine
615146c069 Enqueue commands better in ultralcd.cpp 2017-12-30 04:44:59 -06:00
Scott Lahteine
9686ffedef Single pause flag also indicates SD print pause 2017-12-30 04:44:59 -06:00
Scott Lahteine
6d94bbf618 Apply some PGM_P pointers 2017-12-30 04:03:17 -06:00
Bob-the-Kuhn
cba44128d5 fix include 2017-12-29 10:08:30 -06:00
Scott Lahteine
427df8792d Fix Capabilities Report 2017-12-28 21:08:59 -06:00
Scott Lahteine
2526ac6500 Display up to 3 extruders on char LCD 
…and show bed level indicator at the position of the [H] icon, when a heated bed exists.
 2017-12-28 20:17:42 -06:00
Scott Lahteine
db32c185ae
Merge pull request #8860 from Bob-the-Kuhn/2.0.x-DUE-RRDFGSC 
[2.0.x] DUE - update for Reprap Discount Full Graphic Smart Controller
 2017-12-27 05:06:49 -06:00
Scott Lahteine
9ecdd1f4c7 Multi extruder support for M600 and LCD 2017-12-27 04:33:25 -06:00
Scott Lahteine
a1ce6e8ff4 Clear lcd_clicked immediately on use 2017-12-26 22:26:04 -06:00
Scott Lahteine
5effe1590c Fix NO_VOLUMETRICS bug 2017-12-26 20:04:44 -06:00
Scott Lahteine
f163eede78 No sub-menu if NO_VOLUMETRICS 
For parity with #8911
 2017-12-26 18:28:42 -06:00
Scott Lahteine
2c4e03d2cf Indentation of a SW SPI file 2017-12-25 09:34:43 -06:00
Scott Lahteine
1a827d5b68 Opening brace tweaks 2017-12-25 09:34:43 -06:00
Bob-the-Kuhn
a142fab155 Enable RRDFGSC on Due 2017-12-25 09:22:14 -06:00
Scott Lahteine
b259bb4670 Fix tmc_util global vars 2017-12-25 09:05:31 -06:00
Scott Lahteine
4ef965cc40 Fix compiler warnings 2017-12-25 08:53:01 -06:00
Scott Lahteine
9e8008c49c Fixes for G29, esp. 3POINT 2017-12-25 08:37:27 -06:00
Scott Lahteine
026e301307 lcd_map_control deps on ULTIPANEL 2017-12-25 07:46:25 -06:00
Scott Lahteine
f2731c9f93 Allow consecutive uses of G29 2017-12-25 06:32:33 -06:00
Scott Lahteine
4b49ea1e92 General cleanup of config-store, reset_bed_level 2017-12-25 05:16:01 -06:00
Scott Lahteine
2925852244 Fix GT2560 A+ servo pin 2017-12-25 02:18:56 -06:00
Scott Lahteine
c6354fa153 Tweak M125 code 2017-12-25 01:39:55 -06:00
Scott Lahteine
3b51f5c67e Add pause/resume action to example configs 2017-12-25 01:39:18 -06:00
Scott Lahteine
f704f405af Add pause/resume actions on M600, M125 2017-12-25 01:39:18 -06:00
Thomas Moore
f0a8a1a853 [2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8866) 
* Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
 2017-12-25 01:38:06 -06:00
Scott Lahteine
705ea98fd3 Comment return false in motion functions 2017-12-24 22:57:15 -06:00
Scott Lahteine
50366b00d5 Tweak cleaning buffer / SD finished command 2017-12-24 20:35:05 -06:00
Scott Lahteine
28fc8741d6 Reduce default jerk. XY by half. Z by 1/4 2017-12-24 19:54:11 -06:00
Bob-the-Kuhn
1a948cbd93 Fix SET_OUTPUT glitch - LPC1768 & DUE 2017-12-24 19:25:32 -06:00
Scott Lahteine
869c89d83f
Merge pull request #8865 from thinkyhead/bf2_more_scara_scaling 
[2.0.x] SCARA Feedrate Scaling for G2/G3 - using HYPOT
 2017-12-24 19:18:13 -06:00
Scott Lahteine
1cf1cf8759 Add RADDS_DISPLAY to example configs 2017-12-24 19:00:23 -06:00
Even
ea1a8d1223 add original RADDS LCD + Controller 
adds setup for the original Radds Display+Controller+SD Card Reader PCB
http://doku.radds.org/dokumentation/lcd-display/
 2017-12-24 19:00:23 -06:00
Scott Lahteine
4a8fd8ae92
Merge pull request #8853 from ejtagle/bugfix-2.0.x 
USB Mass Storage Implementation / CDC with HW flow control and misc fixes and improvements for Arduino DUE/RE-ARM based boards
 2017-12-24 18:50:28 -06:00
Scott Lahteine
aa97cd6e9b
Merge pull request #8871 from petrzjunior/bugfix-2.0.x 
[2.0.x][Language] Update Czech for Dec 2017
 2017-12-24 18:48:59 -06:00
Thomas Moore
2917d1217d Revert "Followup to #8698" 
This reverts commit 4e891e9fb7.
 2017-12-23 17:00:33 -06:00
Petr Zahradník
69a51a426c
Update Czech language Dec 2017 2017-12-22 19:35:09 +01:00
Scott Lahteine
caa5093498 General DELTA_IK macro 2017-12-21 22:41:57 -06:00
Scott Lahteine
c694608450 Apply SCARA_FEEDRATE_SCALING to G2/G3 2017-12-21 22:33:27 -06:00
Scott Lahteine
97d509d4d2 Revert "Improved Core-compatible jerk code" 
Reverting commit 3cd7659
 2017-12-21 16:54:30 -06:00
Scott Lahteine
5bc2acc072 Restore position_float to fix LIN_ADVANCE 2017-12-21 16:45:46 -06:00
etagle
33a6fc70e4 Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC) 2017-12-21 02:42:46 -03:00
etagle
d8a4db72ac Reimplemented SW SPI for DUE in assembler. This allows to reach 12Mhz as SPI Clock and improves 4x the transfer speed to the SD card. This is REQUIRED so access to SD from USB is usable (allows 600Kbytes/second transfer speeds) 2017-12-21 02:35:49 -03:00
etagle
99b2fc2066 Adjusted timings on the ST7290 u8glib so RE-ARM and RAMPS4DUE have no problems when writing to the graphics LCD. This fixes Issue #8787 - Special thanks to Bergerac56 for testinf this out !!! 2017-12-21 02:33:22 -03:00
etagle
498ea7512a Exposed SDCard interface to the public, to USB MSD is able to read/write sectors on the SD card 2017-12-21 02:30:18 -03:00
etagle
9aff55ed1f Backported latest improvements and fixes from the SdFat liibrary to our own version. This includes support for CRC7 validation on commands and also, made sure that even if using software SPI implementations, SD card speed is properly adjusted when transitioning from INITIALIZATION to DATA TRANSFER mode. ALL HALs implement spiInit, even in SW SPI mode, and we NEED this change to improve 25x the transfer speed of the SD card and allow implementations of USB MSD 2017-12-21 02:29:00 -03:00
etagle
7447979110 Fixed some warnings on the MakerParts configuration, when compiling using the AVR toolchain (integer overflow on the preprocessor calculations) 2017-12-21 02:23:24 -03:00
etagle
b6f9c333d4 Adding hooks into the idle loop so HALs can execute 2nd plane tasks, such as serving SD card read/writes requested from the USB MSD layer 2017-12-21 02:22:08 -03:00
victorpv
2ec4113cb2 Changes to STM32F1 HAL (#8833) 
Some to correct missing files from previous PR to completely avoid
HardwareTimer Class (reduce overhead). Some changes to formatting.
Changes to DMA ADC to work correctly.
Change to F1 sanity check.
 2017-12-20 16:16:36 -06:00
Scott Lahteine
913d9e9a59 Matching sign across filwidth vars 2017-12-20 00:17:19 -06:00
Scott Lahteine
3cde4c78b2 Use wildcard *.cpp in Makefile 
Based on #8738
Addressing #8731
 2017-12-19 23:44:46 -06:00
Scott Lahteine
fdc5e72720 A single setting to validate filament width 2017-12-19 21:33:25 -06:00
Scott Lahteine
93a6a4e1a8 Add VOLUMETRIC capability item 2017-12-19 20:11:23 -06:00
Scott Lahteine
933f76fda3 Option to disable all volumetric extrusion 2017-12-19 19:51:25 -06:00
Scott Lahteine
31e33d2acd Add NO_VOLUMETRICS to example configs 2017-12-19 19:51:25 -06:00
Scott Lahteine
fc9ee1a4de Fix up serial sanity check 2017-12-19 19:11:43 -06:00
Scott Lahteine
de5ca96654 More parity with 1.1.x, plus whitespace 2017-12-19 18:36:16 -06:00
Scott Lahteine
a891d8d738
Merge pull request #8820 from thinkyhead/bf2_mks_sbase_spi 
[2.0.x] Fix SDSUPPORT for MKS SBASE
 2017-12-17 21:15:49 -06:00
Scott Lahteine
097a26007f Fix SDSUPPORT for MKS SBASE 
Fix supplied by @cjsoong in https://github.com/MarlinFirmware/Marlin/issues/8750#issuecomment-350779983
 2017-12-17 03:05:33 -06:00
Scott Lahteine
8df5955da4 Revert "Reset timer count before first block step" 
This reverts commit 5cf6a062e3.
 2017-12-17 02:37:35 -06:00
Scott Lahteine
957bbab57f Update inc files for parity with 1.1.x 2017-12-16 20:20:06 -06:00
Scott Lahteine
f79026acc1 Apply MKS_12864OLED_SSD1306 to examples 
Followup to #8814
 2017-12-16 20:15:36 -06:00
Dan Delaney
b055d8c39c [2.0.x] Adding support for using the MKS_12864OLED with the SSD1306 controller (#8814) 
* Adding support for using the MKS_12864OLED with the SSD1306 controller

* Update comment for correct controller type
 2017-12-16 18:47:04 -06:00
Scott Lahteine
15d05748df Adding support for the Tronxy and Zonestar LCD 2017-12-15 19:13:52 -06:00
Scott Lahteine
9abbcc3ee0 Apply ZONESTAR_LCD to example configs 2017-12-15 19:11:02 -06:00
Dave Johnson
aed0cfa3d1 Various fixes for 2.0.x configs 2017-12-15 17:09:46 -06:00
Scott Lahteine
674deaf223 Add NANODLP_ALL_AXIS to config examples 2017-12-15 16:22:56 -06:00
robpower
5595098063 V2 Extended NanoDLP_Z_Move_Sync to G4 & G28,Added all axis option. 2017-12-15 16:22:55 -06:00
Scott Lahteine
2b7db90340 Bring Malyan M200 config up to date 2017-12-15 15:47:22 -06:00
Scott Lahteine
8b12371e45 Change some hex case 2017-12-15 15:47:22 -06:00
Scott Lahteine
4782acf60e
Merge pull request #8780 from fiveangle/bf2-typo 
[2.0.x] typo in Marlin.cpp
 2017-12-15 15:25:41 -06:00
teemuatlut
0cd1e91056 [2.0.x] TMC driver update (#8769) 2017-12-15 15:03:14 -06:00
Scott Lahteine
09d13f186f
Correct unskew, after all 2017-12-15 14:24:20 -06:00
Dave Johnson
0d531d9655 Missing HAS_HEAT_BED conditional 
Fixes issue found in #8779
 2017-12-15 11:33:37 -08:00
Dave Johnson
69efb87d19 typo in Marlin.cpp 2017-12-14 08:20:45 -08:00
Scott Lahteine
368c124de8 Fix Planner::unskew parity with skew 2017-12-13 17:46:48 -06:00
Scott Lahteine
cf2193c07f Comment, fix filament width sensor 2017-12-13 02:32:34 -06:00
Scott Lahteine
a641992c1d
Merge pull request #8762 from victorpv/patch-2 
[2.0.x] STM32F1 HAL: Fix issue #8585. Updates to readme.
 2017-12-12 18:28:18 -06:00
Eduardo José Tagle
ac168a03c8 Fixes for the Arduino DUE HAL (Serial Port, Graphics Display, EEPROM emulation) (#8651) 
* Fixing the DUE serial port assignments: Now -1 means the SAM3x USB Device emulating a serial port, and 0 means the USB to serial adapter included as a programming port

* Improving the Fast IO port access implementation on Arduino DUE

* Implemented EEPROM emulation on Due by storing data on the internal FLASH (with wear leveling)

* Implemented a Software SPI for the ST7920 graphics display for the Arduino RAMPS for DUE, as the default one in u8glib is clocking data too fast on ARM, and the display does not understand it.

* Fixing the case where the serial port selected is the USB device

* Adding configuration for the Makerparts 3D printer (www.makerparts.net)

* Tuned MakerParts acceleration on X and Y axis so it never loses steps. Also adjusted pulses per mm to match default hw configuration

* Fine tuned Maximum acceleration for MakerParts printer

* Style cleanup

* Style cleanup (2)

* Style fixes (3)

* Fixing the DUE serial port assignments: Now -1 means the SAM3x USB Device emulating a serial port, and 0 means the USB to serial adapter included as a programming port

* Improving the Fast IO port access implementation on Arduino DUE

* Implemented EEPROM emulation on Due by storing data on the internal FLASH (with wear leveling)

* Implemented a Software SPI for the ST7920 graphics display for the Arduino RAMPS for DUE, as the default one in u8glib is clocking data too fast on ARM, and the display does not understand it.

* Fixing the case where the serial port selected is the USB device

* Adding configuration for the Makerparts 3D printer (www.makerparts.net)

* Tuned MakerParts acceleration on X and Y axis so it never loses steps. Also adjusted pulses per mm to match default hw configuration

* Fine tuned Maximum acceleration for MakerParts printer

* Style cleanup

* Style changes to u8g_dev_st7920_128_64_sw_spi.cpp

* Even more improvements to the FastIO HAL for DUE. Now WRITE() is 2 ASM instructions, if value is constant, and 5 cycles if value is not constant. Previously, it was 7..8 cycles

* After some problems and debugging, seems we need to align the interrupt vector table to 256 bytes, otherwise, the program sometimes stops working

* Moved comments out of macro, otherwise, token pasting does not properly work sometimes

* Improved Software SPI implementation on DUE: Now it honors the selected speed passed to spiInit(). This allows much faster SDCARD access, improving SDCARD menus and reducing latency

* Update u8g_dev_st7920_128_64_sw_spi.cpp

* Disabling EEPROM over FLASH emulatiion if an I2C or SPI EEPROM is present
 2017-12-12 17:51:36 -06:00
victorpv
084f2434a7
Update readme.md 2017-12-11 23:14:13 -06:00
victorpv
7c7ae5ebef
Delete duplicated file. 2017-12-11 23:10:44 -06:00
victorpv
4feffca178
fix for issue #8585 
As reported in this issue:
https://github.com/MarlinFirmware/Marlin/issues/8585
I have it working fine in my local copy like that change.
 2017-12-11 23:07:39 -06:00
Scott Lahteine
d568e586b7 Fix up ubl_motion indentation 2017-12-11 03:08:45 -06:00
Scott Lahteine
24f9bec6f4 UBL + DUAL_X_CARRIAGE compatibility 2017-12-11 03:08:18 -06:00
Scott Lahteine
6d0678d963 Omit unused UBL motion code 2017-12-11 03:08:18 -06:00
Scott Lahteine
3255712343 Skew Correction for UBL 
Also remove unused grid slicing function when using UBL segmented.
 2017-12-11 03:08:15 -06:00
Scott Lahteine
3d796d8040 Move debug code 2017-12-11 00:27:06 -06:00
Scott Lahteine
3db5303bfe _buffer_line => buffer_segment 2017-12-11 00:27:06 -06:00
Scott Lahteine
a71d2f3f40 UBL_DELTA => UBL_SEGMENTED 2017-12-11 00:27:06 -06:00
Scott Lahteine
73e32925e4 References are better for array args 2017-12-11 00:27:06 -06:00
Scott Lahteine
125c572d97 Tweak M114 detail 2017-12-11 00:27:06 -06:00
victorpv
a5150c83a2 [2.0.x] Multiple updates to STM32F1 HAL (#8733) 
* STM32F1 HAL

Adding files for STM32F1 HAL based on libmaple/stm32duino core.
Current persistent_store uses cardreader changes to be sent in separate
commit, but could be changed to use i2c eeprom.
There is another persistent_store implementation that uses the MCU flash memory
to emulate eeprom
Adding readme with some information about the stm32 HAL.

* Switch to Timer4 to avoid a hard reset on STM32F103C6 boards

On bluepill STM32F103C6 boards, using Timer5 results in a error() vector call. Switch to 4 since these are both general purpose, 16 bit timers.

* Add support for EEPROM emulation using Flash

Some low end machines doe not have EEPROM support. Simulate it using the last two pages of flash. Flash does not allow rewrite between erases, so skip writing the working version if that's enabled.

* Basic Pins for a malyan M200

This is a work in progress to go hand in hand with the STM32 work.

* Add support for ADC with DMA. This work has exposed a problem with the pin enumerations in STM boards vs what marlin expects (i.e, try defining PA0 as a temp pin). The hack can be removed with we go to fastio completely. To see this work, set something in adc_pins to a value like PA0 and connect your pullup resistor'd thermistor.

* Missing file - change HAL_adc_init to actually do something

We have an actual ADC init function now.

* Remove pinmode hack

Remove the pin mode hack that I was using to init PA0.

Updated Readme.md

* Several changes to timers and GPIO

Faster GPIO, and faster timer functions by accesing registers and
libmaple.
Still more changes pending for the Timer's code to skip using the
HardwareTimer class altogether.

Switch all enums to be within #defines

This change allows a user to have, for instance, TEMP_4 and TEMP_BED definied but nothing else. The enums which are not defined move "out", allowing the first ones to take the slots in the enum, and since the array is sized on ADC_PIN_COUNT, we always have the right size data and in order.

* Update Malyan M200 pins

Update Malyan M200 pins with correct fan values.

* Test all pins on actual hardware, update definitions

Some of the pin definitions were from knowlege base/pdfs. Now they've been tested against actual hardware. This should be very close to final.

* Update HAL_timers_Stm32f1.cpp

* Add sample configurations for Malyan M200

Add sample configuration for Malyan M200 without bed leveling, and move fan to auto cool E0 since this printer by default has only one fan.


Choose the timer based on MCU defintion. Timer5 is not valid on C8/CB class boards, so use Timer4 for the step timer.


readme.md update

* Updates to timers, and some stm32 boards definitiions

* Correct pin toggle macro.

* Remove duplicated Malyan M200 entry from pins.h

* Update configuration_store.cpp

* Formatting, indentation

* Formatting in HAL_Stm32f1.cpp
 2017-12-10 23:12:45 -06:00
Scott Lahteine
204199e1ce Only compare XYZ to check motion 2017-12-10 23:00:00 -06:00
Scott Lahteine
6686d937fb Always report position on config load/reset 2017-12-10 21:47:14 -06:00
Scott Lahteine
117fc872a7 Update current position in M852 2017-12-10 21:39:49 -06:00
Scott Lahteine
7d2e850577 Have M420 report a changed position 2017-12-10 21:39:49 -06:00
Scott Lahteine
03ba79f144 Sync and report changed position 2017-12-10 21:39:49 -06:00
Scott Lahteine
5cf6a062e3 Reset timer count before first block step 2017-12-10 18:38:53 -06:00
Scott Lahteine
6149b82119 Allow setting current timer counter 2017-12-10 18:38:53 -06:00
Scott Lahteine
82ef6b5242 Add an option to specify "pulse" timer 2017-12-10 18:38:53 -06:00
Scott Lahteine
b8bc965414 General cleanup HAL timers 2017-12-10 18:38:52 -06:00
Scott Lahteine
69d49a2438 Shorter segments may be better 2017-12-09 06:29:14 -06:00
Scott Lahteine
d576f5408e Add MiniRAMBo 1.0a board 2017-12-08 23:42:16 -06:00
Scott Lahteine
c40cb52342 Use MB() for Megatronics 3.1 2017-12-08 23:42:16 -06:00
Scott Lahteine
4fa65a5c25 TCNT0 => HAL_timer_get_current_count 
Fix #8710
 2017-12-08 22:35:28 -06:00
AnHardt
b3daf6b5db [2.0.x] better reverse pass (#8722) 
* repair reverse_pass()

And make it readeble.
This was broken a long time ago.
Not competely unfunctional but far from optimal.

* Minor speedup when calling calculate_trapezoid_for_block

2 float / to 1 foat / and 2 float *

* Various style changes
 2017-12-08 21:38:45 -06:00
Roxy-3D
f58eb391aa [2.0.0] Better off mesh behavior for UBL (#8714) 
* Better off mesh behaviour for UBL

* Suggested ubl.h changes
 2017-12-08 19:00:59 -06:00
Jonathan Barchi
cffd052fee [2.0.x] Fix for #8604 (#8717) 
* Nozzle.cpp: replace incorrect M_2_PI (2/pi) with 2.0 * M_PI

* Use RADIANS(360) instead of 2 * M_PI
 2017-12-08 18:50:05 -06:00
Bob-the-Kuhn
65d0f32f82 divide only when required 2017-12-08 18:14:27 -06:00
Scott Lahteine
728acf521c Followup to #8706 2017-12-08 03:49:33 -06:00
Scott Lahteine
85c6ffbe0d Discard all "continued" blocks on interrupted move 2017-12-08 02:32:58 -06:00
Scott Lahteine
4e891e9fb7 Followup to #8698 2017-12-08 01:01:12 -06:00
Scott Lahteine
de3d3b9cb1 Put FORCE_INLINE before static 2017-12-08 00:46:22 -06:00
Scott Lahteine
43ea265b78
Merge pull request #8685 from MateuszKrawczuk/patch-3 
Update TEMP_BED_PIN in MIGHTYBOARD_REVE
 2017-12-07 21:50:35 -06:00
Scott Lahteine
ae663a4198 PROBE_DOUBLE_TOUCH => MULTIPLE_PROBING 2017-12-07 16:44:13 -06:00
Scott Lahteine
d7800e7975 Apply MULTIPLE_PROBING to example configs 2017-12-07 16:44:12 -06:00
Scott Lahteine
542efda7db
Merge pull request #8698 from thinkyhead/bf2_replace_jerk_code 
[2.0.x] Improved Core-compatible jerk code
 2017-12-07 00:17:00 -06:00
Scott Lahteine
3cd7659924 Improved Core-compatible jerk code 2017-12-06 23:57:57 -06:00
GMagician
99fcf60977 [2.x] addressing #8644 
Removed missing include file
 2017-12-06 23:49:30 -06:00
Scott Lahteine
81c0a918af feed_factor => inverse_secs 2017-12-06 23:03:33 -06:00
Scott Lahteine
f206b81cf7 Sanity check skew+UBL 2017-12-06 22:56:58 -06:00
Scott Lahteine
9898b96992 No lcd_map_control flag in quick_stop 2017-12-06 22:23:34 -06:00
Scott Lahteine
840289e7cc Use block cleaning instead of split flag 2017-12-06 22:22:58 -06:00
Scott Lahteine
90cf6a06be Simplify G26 user_canceled 2017-12-06 22:02:54 -06:00
Scott Lahteine
cdfabbc507 Shorten error text in G29 2017-12-06 21:50:54 -06:00
Scott Lahteine
c846388a65 Standardize LCD interface code for UBL a little 2017-12-06 21:50:54 -06:00
Scott Lahteine
2fde60da12 Changes for parity with 1.1.x 2017-12-06 21:50:54 -06:00
Scott Lahteine
6040d4080e Cleanup stepper ISR. Allow cleaning for endstops. 2017-12-06 21:23:37 -06:00
Scott Lahteine
a4e1d83599 Fix M503 S parameter 2017-12-06 21:23:37 -06:00
Scott Lahteine
a3b098b4be Whitespace clean 2017-12-06 14:02:44 -06:00
AnHardt
a993c5227d Don't split first_move while homing or probing 
While homing or probing it might be bad if the stop/trobe triggers during the first part and the second is still in the buffer.
 2017-12-06 14:13:05 +01:00
Mateusz Krawczuk
5320906b0b
Update TEMP_BED_PIN in MIGHTYBOARD_REVE 
Pin K7 number in fastio1280.h is 69, but it's also ADC15 pin. 
To get correct value from ADC reading it should be set as 15.
 2017-12-06 12:07:20 +01:00
Scott Lahteine
aeb5c623c1 Show "Level Bed Corners" with UBL too 
Addressing #8676
 2017-12-05 21:58:43 -06:00
Scott Lahteine
5fbb2f121e Remove skew warning that could crash the planner 2017-12-05 20:27:20 -06:00
Richard Wackerbarth
c1184552ac Change K1 to required option PID_K1 2017-12-05 19:59:59 -06:00
revilor
9e3fbcf35c fix for #8669 (#8679) 
* fix for #8669

* Update G28.cpp
 2017-12-05 19:40:36 -06:00
Scott Lahteine
d8b444c144 Cleanup constextpr in planner.cpp 2017-12-05 18:55:57 -06:00
Scott Lahteine
a2372cfab5 Fix SKEW_CORRECTION without leveling 2017-12-05 18:48:34 -06:00
Scott Lahteine
4d3c3d0b73 Some ST7920 parity with 1.1.x 
Possibly more should be brought over? Discussion at #8471
 2017-12-05 02:22:36 -06:00
Scott Lahteine
3748c28924 Fix MBL G29 without LCD 
Addressing https://github.com/MarlinFirmware/Marlin/pull/8575#discussion_r154536617
 2017-12-05 01:57:45 -06:00
Scott Lahteine
772298257b Creality pins spacing, MINIPANEL CS pin 2017-12-05 01:57:45 -06:00
Scott Lahteine
b27bc67271 Set initial endstops state 2017-12-05 01:10:31 -06:00
Scott Lahteine
b6ba32ce75 Support for RAMPS Plus (3DYMY) 2017-12-05 00:42:21 -06:00
Scott Lahteine
53694ebaa1 Folllwup to planner splitting 2017-12-04 18:55:23 -06:00
Scott Lahteine
37fff608b0
Merge pull request #8652 from fiveangle/bf2_usbcon_xonxoff 
[2.0.x] SERIAL_XON_XOFF not supported on USB-native AVR devices
 2017-12-04 16:46:18 -06:00
Scott Lahteine
4b612f590c Split first move to planner for better chaining 2017-12-04 15:27:47 -06:00
Unknown
91b63f6d69 SERIAL_XON_XOFF not supported on USB-native AVR devices 
User could enable SERIAL_XON_XOFF on USB-native devices and it would not be enabled without warning, but M115 would report the capability as available.
 2017-12-04 03:57:01 -08:00
Bob-the-Kuhn
57fac33a74 add explanations 
1) add explanations as to why software SPIs are selected

2) remove unused flag/option
 2017-12-03 20:32:22 -06:00
Bob-the-Kuhn
bb23286383 add README & modify spi_pins.h 
still trying to fix file name
 2017-12-03 20:00:56 -06:00
Scott Lahteine
dd8febca1a Revert "Merge pull request #8611 from thinkyhead/bf2_planner_split_first" 
This reverts commit 824980e70e, reversing
changes made to aa7efb96bf.
 2017-12-03 17:50:19 -06:00
Bob-the-Kuhn
fb44f8e50f
Merge pull request #8616 from hg42/bugfix-2.0.x 
[2.0.x][LPC1768][FIX] NUM_DIGITAL_PINS was negative, fixes PWM, arduino io functions, M42, M43, M226, probably also Servo, some LCD, soft spi, SoftwareSerial, ... may be others
 2017-12-03 14:48:00 -06:00
Bob-the-Kuhn
4c5356f77a
Merge pull request #8622 from hg42/implement-LPC1768-GET_TIMER 
[2.0.x][LPC1768][fix] Implement GET_TIMER and other GET_xxx, fixes PWM
 2017-12-03 14:46:22 -06:00
Harald Gutsche
f5b4e1ef4f as a workaround enable PWM for any pin, see PR #8622 2017-12-03 20:37:02 +01:00
Scott Lahteine
6e944a413c
Merge pull request #8607 from benlye/patch-1 
[2.0.x] Fix M49 so that it does not hang the terminal console
 2017-12-03 03:41:33 -06:00
Scott Lahteine
967522b95e
Merge pull request #8615 from dot-bob/Duplicator_6-2.0.x 
[2.0.x] Example configurations for Wanhao Duplicator 6
 2017-12-03 03:37:48 -06:00
Scott Lahteine
f4b16a3bac
Update M49.cpp 2017-12-03 03:34:56 -06:00
Scott Lahteine
f9327534f8
Merge pull request #8634 from fiveangle/bf2_report_xonxoff 
[2.0.x] Report SERIAL_XON_XOFF in M115
 2017-12-03 02:18:50 -06:00
Scott Lahteine
da9f140829
Merge pull request #8637 from thinkyhead/bf2_ubl_uses_LSL 
[2.0.x] Use custom segment length for UBL Cartesian
 2017-12-03 01:57:49 -06:00
Scott Lahteine
3a97de52ef Split first move to planner for better chaining 
Address #8573, #8595
 2017-12-03 01:27:14 -06:00
Scott Lahteine
24437de591 Use custom segment length for UBL Cartesian 2017-12-03 00:10:54 -06:00
Unknown
4c5ffd2349 [2.0.x] Report SERIAL_XON_XOFF in M115 
-Report SERIAL_XON_XOFF in Extended Capabilites M115 report for hosts
-Remove outdated 256 size limitation from comments on RX_BUFFER_SIZE defines
-Update error message conditions
 2017-12-02 21:08:06 -08:00
Scott Lahteine
aa7efb96bf Bring configurations up to date 2017-12-02 21:50:51 -06:00
Scott Lahteine
63a91cd37a Fix a homing comment 2017-12-02 21:02:37 -06:00
Scott Lahteine
8056120195 Rename inverse_mm_s => inverse_secs 2017-12-02 20:28:09 -06:00
Scott Lahteine
23557f8e77 Remove obsolete de_float 2017-12-02 20:23:10 -06:00
Jonathan Barchi
05f8e98c4a Fix for issue #8629 - mismatch between number of stored and loaded dummy items on non-delta machines. (#8631) 2017-12-02 19:04:58 -06:00
Roxy-3D
48fb4e0932
Get Bi-Linear to work with G26 
More corrections to make that happen...
 2017-12-02 14:14:24 -06:00
Roxy-3D
0850b38b45
Get Bi-Linear working with G26 
G26 uses logic that looks like:
```
ex = _GET_MESH_X(i + 1) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS));
```
The Bi-Linear macros need parenthesis to work correctly.
 2017-12-02 14:10:30 -06:00
Scott Lahteine
000b3b3117 Comment/cleanup of motion code 2017-12-02 01:09:55 -06:00
Scott Lahteine
046a1ad331
Merge pull request #8625 from tcm0116/2.0.x-G33 
[2.0.x] Fix missing return values in G33_auto_tune
 2017-12-02 00:51:19 -06:00
Thomas Moore
b35c3b5eb8 Fix missing return values in G33_auto_tune 2017-12-01 21:29:16 -06:00
Scott Lahteine
45c2388a58 Apply const to thermal_runaway_protection args 2017-12-01 19:42:44 -06:00
Scott Lahteine
0154e3480c New feature: BED_SKEW_CORRECTION 2017-12-01 19:39:49 -06:00
Scott Lahteine
082ab8fcab Add SKEW_CORRECTION to example configs 2017-12-01 19:22:27 -06:00
Unknown
d1f11e9c10 fix missing GET_TIMER (used by PWM for Ex_AUTO_FAN) 2017-12-01 22:28:55 +01:00
Harald Gutsche
dd1b503f64 fix NUM_DIGITAL_PINS being negative for more than 127 digital pins 2017-12-01 07:39:46 +01:00
dot-bob
bd45d0363d Add default configurations for the Wanhao Duplicator 6. 2017-11-30 23:24:33 -07:00
Scott Lahteine
91fb6231b2 Fix EEPROM V45 header, layout 2017-11-30 22:45:17 -06:00
Roxy-3D
94e6b2976e
Restore correct G26 values for gMax 1.5+ printer 2017-11-30 18:12:17 -06:00
Scott Lahteine
dd3ce40826 Drop Planner::position_float, use int types 2017-11-30 17:43:31 -06:00
Scott Lahteine
ec6ca37ed3 Fix (un)apply_leveling fade bug 2017-11-30 17:25:44 -06:00
Scott Lahteine
a52fec6ac4 Planner class parity with 1.1.x 2017-11-30 15:55:08 -06:00
Ben Lye
1f3ad461bc
Update M49.cpp 
Fix M49 so that it does not hang the terminal console.
 2017-11-30 20:17:44 +00:00
Scott Lahteine
e37dd64548 Apply LEDColor, language fixes 2017-11-29 23:58:12 -06:00
Scott Lahteine
8f90642eea LED_CONTROL_MENU config changes 2017-11-29 21:02:56 -06:00
Tannoo
cf0f78336b New Feature: LED_CONTROL_MENU 2017-11-29 21:02:55 -06:00
Scott Lahteine
23e45fa3c4 Apply const to some planner vars 2017-11-29 21:02:55 -06:00
Scott Lahteine
7c61bcb058 Apply SEGMENT_LEVELED_MOVES to example configs 2017-11-29 16:57:31 -06:00
Scott Lahteine
ef2531558c Add an option to segment leveled moves 2017-11-29 16:57:30 -06:00
Scott Lahteine
285b868e9b Tweak planner code style 2017-11-29 15:22:18 -06:00
Scott Lahteine
1f2acc33bc Tweaks for check_axes_activity 2017-11-28 18:41:13 -06:00
Vitaliy Sapyanov
7f88334aa3 Done cleanup and removed duplicates in pins_RuRAMPS4D.h (#8582) 
Remove duplicates, with followup fixes
 2017-11-28 18:33:12 -06:00
Scott Lahteine
a8aa43ce2d
Merge pull request #8587 from AnHardt/2_Fix_WDTO_during_long_DELTA_moves 
[2.0.x] Fix WDTO during long delta moves
 2017-11-28 17:29:18 -06:00
Scott Lahteine
4793c34c53 Fix M290 boolval bug 
Fix #8577
 2017-11-28 17:21:33 -06:00
Scott Lahteine
16baa48699 Fix #8579 
Fan speed code fell into a curly brace
 2017-11-28 16:12:14 -06:00
AnHardt
02aa93a6ad Fix Watchdog time out during long lasting DELTA moves 
During long lasting moves of a delta machine neither the temperatures are maintained nor buttons checked nor ... .
The fix is to call 'manage_heater()' and 'idle()' every now and then in the loop where the move is segmented. 
The code is abot the same as in G2_G3 wher we had the same problem with too large circles lasting too long.
Fixing #7510
 2017-11-28 17:03:51 +01:00
Scott Lahteine
fadf9eb2d7 Simplify midpos calculation 2017-11-27 14:00:35 -06:00
Scott Lahteine
0880031e8e Satisfy M702 dependencies 2017-11-27 13:39:59 -06:00
Scott Lahteine
0786b61ce7 Followup to #8575 2017-11-27 12:58:40 -06:00
Scott Lahteine
276271e72f Make MBL work more like PROBE_MANUALLY 2017-11-27 02:12:29 -06:00
Scott Lahteine
94cb412e45 Allow override of probe bounds 2017-11-26 20:55:27 -06:00
Scott Lahteine
c8718aa111 Spacing, macros in LPC1768_PWM 2017-11-26 20:20:05 -06:00
Scott Lahteine
a67cf78c6b Clean up whitespace, spacing 2017-11-26 20:18:52 -06:00
Scott Lahteine
f0dd4e3fa0 Bootscreen parity with 1.1.x 2017-11-26 20:07:17 -06:00
Scott Lahteine
b634bfe1b1 Tweak to readDir code 2017-11-26 18:25:00 -06:00
Scott Lahteine
7be4857ab9 Tweak BLOCK_BUFFER_SIZE description 2017-11-26 17:36:40 -06:00
Bob-the-Kuhn
7d8b66e207
Merge pull request #8570 from Bob-the-Kuhn/Sbase-PWM 
[2.0.x] MKS Sbase - add servo pin definitions and add directly controlled PWM
 2017-11-26 09:36:18 -06:00
Bob-the-Kuhn
59b32c25b5 MKS Sbase changes 2017-11-26 07:47:06 -06:00
Scott Lahteine
f90c075d1f SD Menu patches 2017-11-26 01:14:18 -06:00
Scott Lahteine
9b64be0bc5 Fixes for leveling sub-menus 2017-11-26 00:05:36 -06:00
Scott Lahteine
25674da90c Tweaks to do_blocking_move 2017-11-25 23:31:16 -06:00
Scott Lahteine
22b897e77d Show M211 output with workspace offset 2017-11-25 20:48:20 -06:00
Scott Lahteine
d06e29846d Loosen HAS_BED_PROBE definition 2017-11-25 20:11:21 -06:00
Roxy-3D
e48fcad615 change G26 and G29 bit function names to avoid HAL collision 2017-11-25 19:58:45 -06:00
Scott Lahteine
41ec449960 Fix G26 error return 2017-11-25 19:53:14 -06:00
Scott Lahteine
9badf5dc0d Fix Micromake C1 config 2017-11-25 18:41:07 -06:00
Scott Lahteine
7576ad7fc2
Merge pull request #8554 from tcm0116/2.0.x-cleanup 
[2.0.x] Fix for #8525 and other cleanup
 2017-11-25 18:19:54 -06:00
Scott Lahteine
27c5692b13 Syntax tweaks 2017-11-25 18:13:36 -06:00
Scott Lahteine
d18d40e1d6 M290 report on change, P0 to leave Probe Z Offset alone 2017-11-25 16:47:39 -06:00
LVD-AC
65f365333f [2.0.x] G33 probe error handling 2017-11-25 16:19:10 -06:00
Bob-the-Kuhn
8c69adba8b
Merge pull request #8553 from Bob-the-Kuhn/2.0.x-U8Glib-follow-up 
[2.0.X] U8Glib follow up
 2017-11-25 14:26:32 -06:00
Scott Lahteine
be00e421a7 Patch up M290, M851 2017-11-25 14:11:57 -06:00
Bob-the-Kuhn
fc40d56131 fixed error, updated defaults, added notes 
Travis fix - only allow ultralcd_st7920_u8glib_rrd_AVR.cpp to compile when ST7920 selected
 2017-11-25 12:35:03 -06:00
Roxy-3D
d29cb646e3
Fix erroneous reference to temperature in time calculations 
Travis is having problems at:  https://github.com/MarlinFirmware/Marlin/pull/8560   

So...   doing a direct commit to get things correct.   Bugfix_v1.1.x does not have this bug.  Nothing needs to be done to that branch.
 2017-11-25 10:40:56 -06:00
Thomas Moore
7bb1721f35 Fix _BV already defined warnings for Teensy 2017-11-24 22:34:39 -06:00
Thomas Moore
5f9592a523 Cleanup narrowing warning in pin_is_protected 2017-11-24 22:15:56 -06:00
Thomas Moore
34eaaab5fb Fix _BV already defined warnings 2017-11-24 21:59:31 -06:00
Thomas Moore
2ea779e560 Allow bed probe sanity checks to run 2017-11-24 21:59:01 -06:00
Scott Lahteine
d24b1190bd Don't use Z_MIN_PROBE_ENDSTOP on DELTA 2017-11-24 18:24:22 -06:00
Scott Lahteine
e34c6827ea Init MIXING virtual tools as switching 2017-11-24 18:02:09 -06:00
Scott Lahteine
a9ecb975b2 Apply LINEAR_UNIT to M503 output for M200 2017-11-24 17:32:48 -06:00
Scott Lahteine
d95ee0f003
Merge pull request #8551 from revilor/bugfix-2.0.x 
MK2_MULTIPLEXER does not require E2/E3 stepper pins
 2017-11-24 17:16:23 -06:00
Scott Lahteine
80ada58818 One fewer function call in probe_pt 2017-11-24 17:10:38 -06:00
oliver
92a0dc552a MK2_MULTIPLEXER does not require E2/E3 stepper pins 2017-11-24 23:56:39 +01:00
Scott Lahteine
b49acce035 Tweaks for lcd_external_control 2017-11-24 15:53:25 -06:00
Scott Lahteine
1ef1052ae1 Phatter arrows for Z offset overlay 2017-11-24 15:53:25 -06:00
Scott Lahteine
5926c9c97b Followup for MESH_EDIT_GFX_OVERLAY 2017-11-24 15:53:25 -06:00
Scott Lahteine
ab03a31cc9 Patch G0/G1 for NANODLP_Z_SYNC 2017-11-24 14:11:12 -06:00
Scott Lahteine
a766dfb3b1
Merge pull request #8536 from thinkyhead/bf2_nanodlp_z_move_sync 
[2.0.x] Implement NANODLP_Z_SYNC for 2.0.x
 2017-11-24 13:11:14 -06:00
Scott Lahteine
01e207213f Fix MK2_MULTIPLEXER stepper indirection 2017-11-24 12:49:28 -06:00
Roxy-3D
ec04cf27d3
Fix the G26 out of scope identifiers in the v2.0.0 branch (#8543) 
These changes may need to be warmed over.  I tried to fix things with
the least amount of disruption.   I just wanted to get the bugfix_v2.0.0
branch working for people again.
 2017-11-24 10:39:56 -06:00
Scott Lahteine
dc82babe8e Implement NANODLP_Z_SYNC for 2.0.x 2017-11-24 00:28:06 -06:00
Scott Lahteine
c6b0c104bb Adapt G26 to work for all meshes 2017-11-23 22:31:37 -06:00
Scott Lahteine
5ce7f23afa Config option G26_MESH_VALIDATION for all meshes 2017-11-23 21:43:23 -06:00
Scott Lahteine
c19eb33408 Move G26 to gcode sub-folder 2017-11-23 21:43:23 -06:00
Scott Lahteine
a03f93bab4 Fix fan kickstart 2017-11-23 21:42:45 -06:00
Scott Lahteine
9e3c41f9e8 Tweak fan kickstart / speed code 2017-11-23 15:20:35 -06:00
GMagician
118ac61e59 [2.0.x] Tool change bad behaviour fix 
Previous fix did not work as expected when axeis not homed. It raise Z but never return to original position
 2017-11-22 20:24:03 -06:00
Scott Lahteine
c35d27f77c
Merge pull request #8299 from tcm0116/2.0.x-BIQU_BQ111-A4 
[2.0.x] Add BIQU BQ111-A4 board
 2017-11-22 19:16:04 -06:00
Scott Lahteine
1685cd193b Tweak char_mode init 2017-11-22 19:12:08 -06:00
Scott Lahteine
9406c87a97 Fix up LCD init / charset 2017-11-22 18:22:55 -06:00
Thomas Moore
fa577392b2 Add BIQU BQ111-A4 board 2017-11-22 16:34:59 -06:00
Scott Lahteine
c2fc78c3a8 #ifndef => #if !PIN_EXISTS 2017-11-22 16:28:52 -06:00
Scott Lahteine
c613a1ed38 Fix indentation, stepper.h dependency, etc. 2017-11-22 14:55:30 -06:00
teemuatlut
f011a32771 Board definitions for Ultratronics Pro v1.0 2017-11-22 14:55:24 -06:00
Bob-the-Kuhn
9dad534f02 fixed 2017-11-21 21:37:20 -06:00
Scott Lahteine
4371345cbe
Don't re-init graphical LCD after boot screen 
Followup to 13a3fb1acc
 2017-11-21 18:23:39 -06:00
Scott Lahteine
56c02b7f59 Shift register buttons question 
Can LCD shift registers keep up with faster MCUs?
 2017-11-21 16:12:40 -06:00
Scott Lahteine
3994d3b935 General cosmetic LCD 2017-11-21 16:12:40 -06:00
Scott Lahteine
617993d0ea Patch for !!TEST (was _BV once?) 2017-11-21 16:12:08 -06:00
Scott Lahteine
3269d8dd62 Tweak M42 var 2017-11-21 16:12:08 -06:00
Mateusz Krawczuk
bb1a6eea88
Remove pin count check for MIGTHYBOARD_REVE 
Remove assert and unused code since it is implemented in pinsDebug_plus_70.h
 2017-11-21 14:38:02 +01:00
Scott Lahteine
1ce0fb336b Patch Max7219_LED_Set input args 2017-11-20 21:15:15 -06:00
GMagician
a61127a421 [2.0.x] tool change bad behaviours 
This will solve 2 issues on tool change.
1) when no home is done ("no_move" is set) tool change should never move X & Y because... I don't know where I am...only Z should be adjusted to avoid bed collision if other nozzle is lower than current.
Since no move no bed level matrix should be applied
2) When SWITCHING_NOZZLE is enabled and system is homed there are two movements to go to destination, but first can move Z to older position and then crash on the bed
 2017-11-20 16:34:55 -06:00
Vitaliy Sapyanov
e2724c68ab Update pins_RURAMPS4D.h 
Add and bugfix pins
 2017-11-20 15:36:13 -06:00
Scott Lahteine
9770062309
Merge pull request #8463 from thinkyhead/bf2_32bit_M42 
[2.0.x] Updates to Anet A8 configurations
 2017-11-20 15:12:30 -06:00
Scott Lahteine
3066655727 Try port*100+pin, fix config dependency 2017-11-20 13:58:23 -06:00
Scott Lahteine
ba8bc7ea80 Cosmetic tweaks 2017-11-20 13:58:02 -06:00
Scott Lahteine
f409147116 Fix P2_04, P2_05 2017-11-20 13:58:02 -06:00
Bob-the-Kuhn
a28ccabe2a M42 P1.20 fix 2017-11-20 13:58:02 -06:00
Unknown
33912fa7e8 Update Temperature::setPwmFrequency prototype to match source 
Introduced with #8446
 2017-11-20 01:50:41 -08:00
Scott Lahteine
b9327a4d16 Misc. general cleanup 2017-11-19 15:43:39 -06:00
Scott Lahteine
8836623e0f Fix sq/min/max macros after platform headers 2017-11-19 15:43:39 -06:00
Scott Lahteine
fe4f009fdd 32-bit unless… 2017-11-19 15:43:38 -06:00
Scott Lahteine
25af9decfe Remove enum.h include of MarlinConfig.h 2017-11-19 15:43:38 -06:00
Scott Lahteine
1d4571b88d Dependency adjustments 2017-11-19 15:43:38 -06:00
Scott Lahteine
550f1025f0 Try using <Arduino.h> everywhere 2017-11-19 14:23:02 -06:00
Scott Lahteine
c0000a0cdc Move servo code to modules/servo.* 2017-11-19 14:23:02 -06:00
Scott Lahteine
81bc428b48 Don't compile custom u8g without DOGLCD 2017-11-19 13:58:38 -06:00
Bob-the-Kuhn
c14000775b PWM fixes, slow down fan update 
include LPC1768 syntax for M42

couple more pin_t changes

consistency

change M42 to R, P format

Revert "change M42 to R, P format"

This reverts commit 01f12f579ec9ccc1bb9126e68d2c86449e9b7edf.
 2017-11-18 07:05:50 -06:00
Scott Lahteine
60adc6ff02 Display filwidth ratio in terms of E mm 2017-11-18 07:01:49 -06:00
Scott Lahteine
6e533748eb Fixes #8472 2017-11-18 05:15:55 -06:00
Scott Lahteine
485abb023b
Merge pull request #8456 from thinkyhead/bf2_wednesday_tweaks 
[2.0] No retroactive adjustment with M851 Z
 2017-11-18 04:49:53 -06:00
Scott Lahteine
3bba7d60f3 No retroactive changes with M851 Z 
If using babystep to adjust the Z probe offset, the axis will move and the mesh will be updated at the same time, causing a doubling of the Z offset over the rest of the print.

To correct for this, the current Z position would need to be modified in the opposite direction, canceling out the additional Z offset added to the mesh. This would be confusing to users, and moreover it would not be accurate without also taking the current Z fade level and current Z height into account.

It might make sense to change the mesh in the case where no babystepping is taking place, but this could be considered an undesirable side-effect of changing the `zprobe_zoffset`.

One way to remedy this would be to return to storing the mesh with `zprobe_zoffset` included, then subtracting `zprobe_zoffset` from the returned Z value. Thus, a babystep moving the Z axis up 1mm would subtract 1 from `zprobe_zoffset` while adding 1 to all mesh Z values.

Without including the `zprobe_zoffset` in the `z_values` there is no safe way to alter the mesh in conjunction with babystepping, although it's fine without it.
 2017-11-18 03:36:39 -06:00
Scott Lahteine
32512332df Apply some formatting 2017-11-18 03:12:30 -06:00
Scott Lahteine
7dacc999b9 Remove obsolete show_bootscreen var 2017-11-17 17:01:43 -06:00
Roxy-3D
9729528d13
Update UBL's Delta Probable locations 
This is a non-intuitive change.   @oldmcg says in this post https://github.com/MarlinFirmware/Marlin/issues/7572#issuecomment-340641207 that using DELTA_PRINTABLE_RADIUS is better than DELTA_PROBABLE_RADIUS for setting the probe limits.   This is because the automatic probe code checks all locations for being reachable by the probe prior to doing the probe.
 2017-11-17 16:44:57 -06:00
Scott Lahteine
d48cb6bf41 Apply coding standards to Max7219 2017-11-17 15:32:21 -06:00
Scott Lahteine
bd8bcf06e7 Updates to Anet A8 configurations 
Based on #8426
 2017-11-16 23:19:36 -06:00
Bob-the-Kuhn
7eea000f4b E0 auto fan fixes 2017-11-16 18:42:56 -06:00
Scott Lahteine
b2dda096fe Fix FILAMENT_LCD_DISPLAY for disabled state 2017-11-16 16:57:48 -06:00
Scott Lahteine
1e8afb66b7 Fix a planner comment 2017-11-16 16:57:47 -06:00
Scott Lahteine
50f09cc029 Miscellaneous cleanup 2017-11-16 00:47:16 -06:00
Scott Lahteine
63257dc083 Fix M503 output for M145 
Fixes #7978
 2017-11-15 04:00:18 -06:00
Scott Lahteine
0918dae66e Add OV() macro for use in thermistor tables 2017-11-15 03:15:18 -06:00
Scott Lahteine
24057270a3
Merge pull request #8420 from RowanMeara/rm-dithering-2.0.x 
[2.0.x] Fix Software Fan PWM
 2017-11-15 02:30:19 -06:00
Scott Lahteine
5079a02c90 Add HAL_SERVO_LIB to HAL_Due.h 2017-11-15 02:07:01 -06:00
Scott Lahteine
9c3761047e
Merge pull request #8434 from thinkyhead/bf2_fix_M32_subroutines 
[2.0] Fix 'M32 P' subroutines
 2017-11-15 01:15:02 -06:00
Scott Lahteine
e0d367f1fb Fix M32 P subroutine handling 2017-11-15 00:44:21 -06:00
Scott Lahteine
9f8b4c5ee8 Patch SD lib files for readability 2017-11-15 00:44:21 -06:00
Scott Lahteine
2c8c30437e Fix parser parameter value handling 2017-11-14 23:20:33 -06:00
RowanMeara
6131533157 Change dithering behavior to intended. 2017-11-14 00:47:07 -08:00
Scott Lahteine
e70b44dc0b Make sure leveled[] is defined for later use 2017-11-14 02:13:38 -06:00
Scott Lahteine
54774841ba
Merge pull request #8416 from thinkyhead/bf2_M114_DETAIL 
[2.0] Add M114_DETAIL to Configuration_adv.h
 2017-11-14 00:28:55 -06:00
Scott Lahteine
009e3a7aa7 Add M114_DETAIL to Configuration_adv.h 2017-11-14 00:03:17 -06:00
Scott Lahteine
6d6c3b1e97 Fix up REPRAPWORLD_KEYPAD defines 2017-11-13 22:14:54 -06:00
Scott Lahteine
3f0a982b8c Move Filament Width Sensor to Configuration_adv.h 2017-11-13 21:05:57 -06:00
Scott Lahteine
b76e173205 Move test extrusion options under G26 2017-11-13 21:05:57 -06:00
Scott Lahteine
14ebedca27 Drop unused LARGE_FLASH option 2017-11-13 15:44:24 -06:00
Scott Lahteine
b7feb53e8a Support for Extrudrboard in Printrboard Rev.F 2017-11-13 15:44:23 -06:00
Scott Lahteine
91baca6abb Patches for compiler warnings/errors 2017-11-13 04:43:47 -06:00
Scott Lahteine
2f73dec077 Apply native workspace fixes for G92, G53-59 2017-11-13 02:09:12 -06:00
Scott Lahteine
04abd8d459 Improve and clarify M428 code 2017-11-13 02:09:11 -06:00
Dave Johnson
c009a990e4 [2.0.x] Fix some 8-bit Teensyduino compile warnings (#8385) 
* Fix some 8-bit Teensyduino compile warnings

-Override Teensyduino legacy NOT_A_PIN 127 define
-some fixups for Printrboard_RevF pins

* Proper cleanup of Printrboard Rev.F pins

* Apply LCD fixes to Printrboard v1
 2017-11-13 01:07:59 -06:00
Scott Lahteine
e8e92f8969 No leveling data in M114 if no leveling is enabled 2017-11-12 23:03:38 -06:00
Scott Lahteine
f5d210c35c Fix report_current_position 2017-11-12 23:02:53 -06:00
Roxy-3D
faaae7a1b2
Provide more clearance for BL-Touch probe 2017-11-12 13:11:22 -06:00
Scott Lahteine
06ee6584fd Remove offsets from soft endstops, tool change 2017-11-11 22:47:38 -06:00
Scott Lahteine
c938273bd5 Coding standard patch of M290 2017-11-11 22:14:21 -06:00
Scott Lahteine
98c1265e3b Disable laser power when PWM goes to 0 2017-11-11 22:00:22 -06:00
Scott Lahteine
d4a1154c25 Use do_blocking_move_to where possible 2017-11-10 20:55:23 -06:00
Scott Lahteine
36426af564
Merge pull request #8356 from tcm0116/2.0.x-M600 
[2.0.x] Normalize load/unload length in M600
 2017-11-10 19:44:08 -06:00
Scott Lahteine
1ed86adf9c Cleanup around updatePID 2017-11-10 19:27:34 -06:00
Scott Lahteine
75a58ee4b8 Fix position_is_reachable bug in waiting 2017-11-10 19:27:33 -06:00
LVD-AC
e334efb2a7 PROBE_MANUALLY etc. 2017-11-10 19:27:33 -06:00
Bob-the-Kuhn
b6415dc169 finish 2017-11-10 14:39:55 -06:00
Scott Lahteine
0efa66be0b Updates to Traditional Chinese 
From @cheton at #8347
 2017-11-10 04:52:20 -06:00
Scott Lahteine
cba9c1cf9e Add pre-calculated planner.e_factor 2017-11-10 03:14:24 -06:00
Thomas Moore
600c85226e Normalize load/unload length in M600 2017-11-10 02:31:46 -06:00
Scott Lahteine
81b91b3f9d Clean up some trailing white-space 2017-11-10 02:31:04 -06:00
Roxy-3D
2f9848ede3
Correct gMax 1.5+ example file 
And...   Keep both branches in synchronization.
 2017-11-09 23:44:14 -06:00
Scott Lahteine
006dad4b52 Add pins_RURAMPS4D.h & change pins.h 
http://3dtoday.ru/blogs/svs0724/ruramps4d-ramps-for-adruino-due-the-pilot-shipment-available-for-zack/
 2017-11-09 21:51:06 -06:00
Scott Lahteine
00514857e9 SBASE serial port -1, RAMPS spacing 2017-11-09 21:41:07 -06:00
Scott Lahteine
c66696c507
Merge pull request #8344 from tcm0116/2.0.x-delta_height 
[2.0.x] Add delta_height variable in lieu of using home_offset
 2017-11-09 01:21:53 -06:00
Scott Lahteine
22e18fe832 Patch _manual_goto_xy for kinematics 2017-11-08 22:21:38 -06:00
Scott Lahteine
0cfb936dd1 Clarify some motion code 2017-11-08 22:15:55 -06:00
Thomas Moore
f34c3597dc Add delta_height variable in lieu of using home_offset 2017-11-08 22:10:08 -06:00
Bob-the-Kuhn
d47fbf791b Arduini IDE compatibility changes 
changed includes to make Arduino IDE happy
 2017-11-08 20:49:49 -06:00
Scott Lahteine
95ea43bde4 Update XYZ dual stepper configurations 2017-11-08 20:31:43 -06:00
Scott Lahteine
b0b4a20930 Tweaks to core motion code 2017-11-08 20:09:09 -06:00
Scott Lahteine
8805e24cc7
Fix tilt_mesh_based_on_probed_grid output bug 2017-11-08 20:06:20 -06:00
Scott Lahteine
24437fbb13
Fix G26 Y argument bug 2017-11-08 19:20:10 -06:00
Scott Lahteine
09b05c9d79
Merge pull request #8321 from Bob-the-Kuhn/pins_re-arm 
2.0.x - pins_RAMPS_RE_ARM.h - add mega2560 pin numbers
 2017-11-08 13:11:13 -06:00
Scott Lahteine
e6788bb6ae Fix get_destination_from_command for E 2017-11-08 12:54:00 -06:00
Roxy-3D
967104e1ce
Default Extrusion Settings were off a few lines in some of the example config files. (#8333) 2017-11-08 11:56:00 -06:00
Bob-the-Kuhn
8875885a15 pins add old names 
fix typo

re-write PWM section, add "not on Re-ARM" list
 2017-11-08 11:11:38 -06:00
Roxy-3D
1c6e83c137
if !HAS_MESH we still need to do some motion! (#8328) 
* if !HAS_MESH we still need to do some motion!

Thank You MagoKimbra !

* Ooops....   need #else and not #elif
 2017-11-08 09:42:21 -06:00
Scott Lahteine
82f45c3e6a Patch G33 misuse of PROBE_MANUALLY 2017-11-08 00:36:06 -06:00
Scott Lahteine
064e6fe60e Remove debugging pin toggle from LCD code 2017-11-07 23:00:54 -06:00
Bob-the-Kuhn
0483a7df91 AVR RRD works 
LPC1768 VIKI2 & RRDFG are working

looks like all SPIs are working

library change

sh1106 locks up

fixed lockup, started I2C SW com

pretty

re-org

restore a few files

make library happy

switched HAL version of rrd

fix travis error

travis error fixes

another travis fix

cleanup

minor update

one more

correct spacing in platformio.ini
 2017-11-07 18:40:29 -06:00
Scott Lahteine
96c9d715f3 Patch abuse of sprintf_P in G33 2017-11-07 17:33:50 -06:00
Roxy-3D
ed62c621d7
Fix G26 Circle Drawing. Add Default Extrusion Settings (#8313) 
- Fix G26 Circle Drawing.
- Add default extrusion settings so machine can print lines on print bed
- Yet to be done: Get LCD Menu's to use these settings.
 2017-11-07 17:13:53 -06:00
Scott Lahteine
8fea26aa9d Fix PID_autotune watch temp increase value 2017-11-07 15:51:48 -06:00
Scott Lahteine
2c099fd4c2 Update Thermal Protection Documentation 2017-11-07 15:46:44 -06:00
Colten Edwards
a6160916b0 [2.0] Fix M48 for delta printers/ABL compile issue (#8286) 
* fix M48 for delta printers

fix M48 for delta printers. home printer if not already homed.

* remove ENABLED(DELTA)

remove ENABLED(DELTA) as it is not needed.

* Update M48.cpp

* abl needs queue.h

without queue.h abl will not compile since there is a script that runs at the end of it and we need to queue it up.
 2017-11-07 15:36:33 -06:00
Scott Lahteine
17ef0a513b Update G92 for native workspace 2017-11-07 13:07:16 -06:00
Scott Lahteine
b4bf8928aa German language updates 
Corresponding to #8306
 2017-11-07 12:10:29 -06:00
Thomas Moore
73ca5345e1 Fix Delta EEPROM 2017-11-07 16:48:21 +00:00
Scott Lahteine
714d2b9bbc
Merge pull request #8297 from thinkyhead/bf2_M118_and_others 
[2.0] Fix M118, compiler warnings, etc.
 2017-11-06 23:25:49 -06:00
Alexey Shvetsov
83555933aa Add platformio support for stm32 (#8246) 
[2.0] Add platformio support for stm32
 2017-11-06 23:03:59 -06:00
Scott Lahteine
85a62bbf46 Misc. fixes to compiler warnings, etc. 2017-11-06 22:57:05 -06:00
Scott Lahteine
e6aba99f16 Fix M118 parameters, with strict guideline 2017-11-06 22:57:01 -06:00
Scott Lahteine
e9b1944a67 Patch non-extended font option 2017-11-06 21:42:21 -06:00
Roxy-3D
6324b09934
Revert "Fix EEPROM crc (#8284)" (#8292) 
This reverts commit 172c36f517.
 2017-11-06 19:52:05 -06:00
Rowan Meara
172c36f517 Fix EEPROM crc (#8284) 2017-11-06 19:19:30 -06:00
Scott Lahteine
cc4d28b73c
Update bilinear for native workspace 2017-11-06 17:04:41 -06:00
Scott Lahteine
94c7205d64
Merge pull request #8281 from thinkyhead/bf2_alligator_dac 
[2.0] Use fastio for Alligator dac084s085, etc.
 2017-11-06 12:16:18 -06:00
Scott Lahteine
2246316605 Fix name collision. timer_t => hal_timer_t 2017-11-05 19:31:07 -06:00
Jason Hitesman
4efaef7039 [2.0.x] Fix archim2 SSDS define (#8278) 
* Fix SSDS define

* Update pins_ARCHIM2.h
 2017-11-05 19:23:19 -06:00
Scott Lahteine
c8dfa26bc8 Use fastio for STM32F1 endstop interrupts 2017-11-05 19:20:28 -06:00
Scott Lahteine
185dec800b Use fastio for HAL SPI EEPROM 2017-11-05 19:20:03 -06:00
Scott Lahteine
297666ea14 Use fastio for Alligator dac084s085 2017-11-05 19:14:42 -06:00
Scott Lahteine
c5d95d318b
Merge pull request #8249 from thinkyhead/bf2_nozzle_cleanup 
[2.0] Cleanup Nozzle class, fix XY vs Z move order
 2017-11-05 18:51:11 -06:00
Scott Lahteine
7e2fee9d56
Merge pull request #8274 from tcm0116/2.0.x-re_arm_D8 
[2.0.x] Correct RAMPS_D8_PIN for Re-ARM
 2017-11-05 18:39:28 -06:00
Scott Lahteine
59c558d612
Merge pull request #8275 from GMagician/2.0.x-Typo-fix 
[2.0.x] typo fix (removed spaces)
 2017-11-05 18:39:04 -06:00
Scott Lahteine
be73d5cc08 Cleanup Nozzle class, fix XY vs Z move order 2017-11-05 18:31:07 -06:00
GMagician
9e93b7ccbd [2.0.x] removed spaces 
Removed spaces in array declaration
 2017-11-05 20:42:48 +01:00
Thomas Moore
b91a822d7a Correct RAMPS_D8_PIN for Re-ARM 2017-11-05 13:03:42 -06:00
studiodyne
d295f984e3
Update fwretract.cpp 2017-11-05 15:42:30 +01:00
Scott Lahteine
1b40e9c464 Implement CNC_COORDINATE_SYSTEMS 2017-11-04 22:28:46 -05:00
Scott Lahteine
1b42fba39b Add CNC_COORDINATE_SYSTEMS to configs 2017-11-04 22:28:46 -05:00
Scott Lahteine
a22434508f Match tweaks to G33 from 1.1 2017-11-04 22:28:46 -05:00
Scott Lahteine
c07bbd4154 Prettify some EEPROM code 2017-11-04 22:28:46 -05:00
Scott Lahteine
d6aa127c76 Remove I2CPEM workspace offset 2017-11-04 22:28:46 -05:00
Scott Lahteine
79772219ae Fix Fan Multiplexer init 2017-11-04 22:28:46 -05:00
Scott Lahteine
ca7d36d9ed RAMPS pins for ANET_KEYPAD_LCD 2017-11-04 21:22:53 -05:00
Colten Edwards
e0a6ee8da5 [2.0] Fix up G33, LPC1768 + SDCARD_SORT_ALPHA (#8250) 
* Update Conditionals_post.h

* Add a cast to round() to convert to a unsigned int

Add's a cast to round() so that it will compile properly. round() returns a float which must be cast to a integer for the following % operation. Use a unsigned int as a negative index to an array is wrong. Should never be more than 255 points allowing us to use a 8 bit cast.

* Update G33.cpp
 2017-11-04 18:04:18 -05:00
Scott Lahteine
dac1f6fe74 Tweaks to cubic_b_spline code style 2017-11-04 14:46:10 -05:00
Scott Lahteine
4df024d7b9
Merge pull request #8234 from thinkyhead/bf2_native_operation 
[2.0.x] Operate in Native Machine Space
 2017-11-04 14:31:44 -05:00
Scott Lahteine
601ccded89 Fix case-insensitive config issue 2017-11-04 14:10:13 -05:00
Scott Lahteine
f8393a0908 Operate in Native Machine Space 2017-11-04 00:05:38 -05:00
Scott Lahteine
d83a9a53e8
Merge pull request #8220 from thinkyhead/bf2_serial_port_-1 
[2.0] Add SERIAL_PORT -1 option for configurators
 2017-11-03 15:25:12 -05:00
Scott Lahteine
93ba72ea83 Add SERIAL_PORT -1, set on SBASE, STM32F103RET6 2017-11-03 15:22:45 -05:00
Scott Lahteine
7e43dd1d23 Fix probes configuration url 
Based on #8241 by @machaj
 2017-11-03 13:35:40 -05:00
AnHardt
ca0e4b4e96 Some cleanup around 'lcd_bootscreen()' and 'lcd_kill_screen()' 
Move 'lcd_bootscreen()' from `lcd_init()` to 'setup()' where it is cexecute exactly once. Saves 'bool show_bootscreen'.
Move the call of 'lcd_custom_bootscreen()' to the begin of 'lcd_bootscreen()'.
Move the delays into the related functions.
Move the picture loop around 'lcd_kill_screen()' into the function.
 2017-11-03 12:02:48 +01:00
Scott Lahteine
84b93d941f
Merge pull request #8178 from thinkyhead/bf2_config_tweak 
[2.0.x] Faster menu navigation for Anet A8
 2017-11-03 04:49:17 -05:00
teemuatlut
70be4d206e [2.0.x] UltiMachine Archim2 (#8190) 
* UltiMachine Archim2 support

* SPI gets included by the library

* Invert TMC2130 diag pin state

* Clean up Archim2 pins

* Update Archim2 config

* FAN2 -> FAN1

* Cleanup

* Add brief Archim installation instructions

* Bring pins into compliance

* Update 1.0 SD Detect pin for 1.1

* Update Configuration.h

* Update pins_ARCHIM2.h
 2017-11-03 04:48:15 -05:00
Scott Lahteine
f3deb37bdf
Merge pull request #8236 from thinkyhead/bf2_protect_M303 
[2.0.x] M303 thermal runaway protection
 2017-11-03 04:42:14 -05:00
Scott Lahteine
31f112cf58 Cleanup trailing whitespace 2017-11-03 04:07:45 -05:00
Scott Lahteine
2f9e42feb9 M303 thermal runaway protection 2017-11-03 03:57:46 -05:00
Scott Lahteine
e5ae545647 Remove ADCKey steps acceleration 2017-11-03 03:41:55 -05:00
Luc Van Daele
6827e243a0 [2.0.x] G33 magic numbers (#8171) 
* [2.0.x] G33 magic numbers

* oops

* Comments

* oops

* warning

* better comment section

* remarks

* extra grids
 2017-11-03 03:36:16 -05:00
Scott Lahteine
8735ae984b
Merge pull request #8227 from tcm0116/2.0.x-pin_mapping 
LPC1768: updates to use the new pin_t typedef
 2017-11-03 03:10:19 -05:00
AnHardt
c72a0610b4 Fix watchdog in WATCHDOG_RESET_MANUAL mode AVR 2017-11-03 04:43:00 +01:00
Thomas Moore
13d839795c LPC1768: updates to use the new pin_t typedef 2017-11-02 18:43:57 -05:00
Scott Lahteine
eb13b8d985 Add MKS Gen L board 2017-11-02 17:06:08 -05:00
Morten
063e957fc4 Update pins_MKS_SBASE.h (#8188) 
* Update pins_MKS_SBASE.h

Deleted E_MUX2, not used.
Changed #define LCD_PINS_D4      P0_14  // EXP1.5 to #define LCD_PINS_D4      P0_15  // EXP1.5, wrong in MKS's pinout schematic.
Swapped TEMP_BED_PIN and TEMP_0_PIN port's, request from user, more logical...

* Update pins_MKS_SBASE.h

Moved MUX signals to J8 and re added MUX2, cleaner wiring..
 2017-11-02 13:50:23 -05:00
Scott Lahteine
f7133e53fd
Fix case light off 
Addressing #8205
 2017-11-01 21:22:15 -05:00
Scott Lahteine
0108d5181f Allow asterisks in G-Code commands 
Addressing #6655
 2017-10-31 21:20:41 -05:00
Scott Lahteine
34745b2183 Organize boards.h by architecture 2017-10-31 16:10:38 -05:00
android444
9cc1d8e312 [2.0.x] Support for SilverGate Board 2017-10-31 15:27:26 -05:00
Scott Lahteine
03e5369411 Faster menu navigation for Anet A8 
Addressing #8166
 2017-10-31 14:46:55 -05:00
Scott Lahteine
f1edf83720
Merge pull request #8187 from rafaljot/patch-5 
Update InterruptVectors_Due.cpp
 2017-10-31 14:14:08 -05:00
Scott Lahteine
b2bd77c40a
Merge pull request #8191 from thinkyhead/bf2_rearm_more 
[2.0.x] Add SDCARD_SORT_ALPHA options for LPC1768
 2017-10-31 14:12:14 -05:00
Scott Lahteine
571ced712d Add SDCARD_SORT_ALPHA options for LPC1768 2017-10-31 14:05:40 -05:00
rafaljot
778e4e4c23
Update InterruptVectors_Due.cpp 
const pfnISR_Handler *isrtab = get_relocated_table_addr();

What compiler do you use? Arduino 1.8.5 can't compile this "const".
 2017-10-31 15:00:06 +01:00
Scott Lahteine
cae8703e0d
Merge pull request #8181 from thinkyhead/bf2_fix_bootscreen_repeat 
[2.0.x] Only show custom bootscreen once
 2017-10-31 02:37:40 -05:00
Scott Lahteine
a516856df9 Only show custom bootscreen once 2017-10-31 01:47:30 -05:00
GMagician
727a403ba1 [2.0.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour (#8176) 
* [2.0.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour

NO_MOTION_BEFORE_HOMING should prevent XYZ movements only when homing is not done.
E axes should be allowed

* Update G0_G1.cpp

* Update G0_G1.cpp
 2017-10-30 22:50:22 -05:00
Alexey Shvetsov
577659cacf Basic support for Azteeg_X5_GT (#8139) 
* Basic support for Azteeg_X5_GT

Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>

* Add fan pins for AZTEEG X5 GT

Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>

* Fix endstop pins

* Add servo0 pin
 2017-10-30 16:01:20 -05:00
Scott Lahteine
0b02f9cc33
Merge pull request #8168 from thinkyhead/bf2_config_tweak 
[2.0.x] Apply Re-ARM SPI review items
 2017-10-30 15:49:50 -05:00
Scott Lahteine
04c0d9f3c3 Implement kinematic software endstops 2017-10-30 15:16:30 -05:00
Scott Lahteine
9f89b5d876 Fix for MAX_VFAT_ENTRIES sanity check 2017-10-30 15:11:47 -05:00
Scott Lahteine
2cdde08339 Apply items specified in code review 
Followup to #8122
 2017-10-30 15:03:07 -05:00
Scott Lahteine
34be5d33c0 The plural of 'axis' is 'axes' 2017-10-30 14:21:43 -05:00
Bob-the-Kuhn
6e5f13a5c2
Merge pull request #8122 from Bob-the-Kuhn/2.0.x-restore-Re-ARM-RepRap-Discount-Full-Graphics-fix-(partial-solution) 
2.0.x - Restore fix for garbaged display on Re-ARM with RepRap Full Graphics Smart Controller
 2017-10-30 13:16:16 -05:00
Bob-the-Kuhn
b7a66742dd tested 
add sort alpha section to other LPC1768 boards
 2017-10-30 13:01:19 -05:00
Jeffrey Li
bbc2e66634 Fix AZSMZ MINI pins for new LPC1768 pinmapping 2017-10-30 04:19:06 -07:00
Scott Lahteine
31e96935f7 Fix EXTRA_FAN_SPEED 
Addressing #8158
 2017-10-30 00:10:00 -05:00
Scott Lahteine
c94dce6b32
Merge pull request #8113 from thinkyhead/bf2_fixup_sd_reprint 
[2.0.x] Cleanup after SD Print Again, whitespace, tabs
 2017-10-29 23:57:51 -05:00
Scott Lahteine
ce1c9c0808 Tweak QUICK_HOME description 2017-10-29 23:48:13 -05:00
Scott Lahteine
12458cefc4 Remove 5s timer hack. Encoder pos is saved on print start! 2017-10-29 22:45:19 -05:00
Scott Lahteine
9a4cf11835 Remove return_to_status_ms hack, just use defer... 2017-10-29 22:45:18 -05:00
Scott Lahteine
8949c8c0a5 Move SD_REPRINT_LAST_SELECTED_FILE to ultralcd.cpp 2017-10-29 22:45:18 -05:00
Scott Lahteine
817175613a
Merge pull request #8157 from thinkyhead/bf2_anet_10_servo 
[2.0.x] Define a default SERVO0_PIN for Anet 1.0
 2017-10-29 19:55:00 -05:00
Scott Lahteine
723f2a77f6 Implement support for Dual X and Y endstops 2017-10-29 18:56:04 -05:00
Scott Lahteine
e04425281d Add Dual Steppers / Endstops to configs 2017-10-29 18:56:04 -05:00
Scott Lahteine
edff2c917b Cleanup for DIGIPOTS settings 2017-10-29 18:56:03 -05:00
Scott Lahteine
3e8754a38a Add/correct time units on planner vars / M205 B 2017-10-29 18:47:21 -05:00
Scott Lahteine
b2a48f1a04 Provide a SERVO0_PIN for non-standard LCD 2017-10-29 18:36:16 -05:00
Scott Lahteine
b232f39341 AVR: Hidden option to use 8s watchdog 2017-10-29 18:36:16 -05:00
Scott Lahteine
9d4cfd2013
Merge pull request #8142 from thinkyhead/bf2_fix_m303 
[2.0.x] Fix M303 thermal protection
 2017-10-29 04:46:34 -05:00
Scott Lahteine
eae0aea1e0 Fix M303 thermal protection 2017-10-29 04:30:50 -05:00
Luc Van Daele
a1a4fc277e (2.0.x) serious bug G33 (#8136) 
* (2.0.x) serious bug G33

* Revert config changes

This reverts commit 74b5a98223b7b7fb970d05b8541f4a079c3cfe56.
 2017-10-29 04:12:33 -05:00
Thomas Moore
325233b454 Fix automatic stepper assignment for X/Y/Z dual stepper drivers (#8130) 2017-10-28 19:45:07 -05:00
Thomas Moore
50b4f9cbf7 LPC1768 Pin Mapping and M43 cleanup (#8119) 
* LPC1768 M43 cleanup

* Update pinmapping.h to #define pins
 2017-10-28 19:44:54 -05:00
Scott Lahteine
6b1d1a818b Revert default BABYSTEP_MULTIPLICATOR to 1 2017-10-27 19:45:44 -05:00
etagle
ba8dc678f5 Arduino Due XON/XOFF implementation 
Alos includes emergency parser and configurable TX/RX buffers for Arduino Due.
 2017-10-27 03:24:23 -05:00
etagle
8d9c3cc2b7 Add a module for Due SRAM-based Interrupt Vector Table 
This is the ONLY way to be able to override ISRs stolen by the Arduino Runtime, such as Serial or USB device interrupts. This feature is needed so Arduino modules can be replaced and enhanced.
 2017-10-27 03:24:23 -05:00
etagle
c9bbef6380 Cosmetic fix for HAL_AVR/MarlinSerial.cpp 
Instead of using const char, it is better to use uint8_t
 2017-10-27 03:24:23 -05:00
LVD-AC
dcfc2503c2 G33 Autotune calibration update #10 2017-10-27 02:11:24 -05:00
Scott Lahteine
b338cafc65 Merge pull request #8111 from thinkyhead/bf2_fwretract_fix_oct26 
[2.0.x] Improved Firmware Retraction logic
 2017-10-27 02:02:06 -05:00
Scott Lahteine
ada90f7335 Clean up trailing spaces 2017-10-26 23:33:43 -05:00
Scott Lahteine
7fad26549b Concise SD_REPRINT_LAST_SELECTED_FILE description 2017-10-26 23:33:02 -05:00
Scott Lahteine
33f379fe88 Add some Polish language 
Thanks @SCiunczyk
 2017-10-26 22:49:04 -05:00
Scott Lahteine
daeff5a11a Tweak neopixel self-test 2017-10-26 22:47:07 -05:00
Scott Lahteine
0ceec1f166 Fix leveling_active_at_z warning 2017-10-26 22:22:54 -05:00
studiodyne
eb02f8c719 Improve FWRETRACT logic, add common sense 2017-10-26 22:22:54 -05:00
Scott Lahteine
bd78ca0ee3 Add M290 Babystepping 2017-10-26 20:44:43 -05:00
Scott Lahteine
ce5f0ec85a Bring STM32 example config up to date 2017-10-26 17:25:44 -05:00
Scott Lahteine
46e9eae159 Tweak to M100 config comment 2017-10-26 17:25:44 -05:00
Scott Lahteine
c45514f811 Merge pull request #8094 from thinkyhead/bf2_neopixel_led_parity 
[2.0.x] Bring NEOPIXEL_LED into parity with 1.1.x
 2017-10-26 17:24:38 -05:00
Bob-the-Kuhn
229a27a1c7 save FLASH by using reduced font for some languages 2017-10-26 16:08:17 -05:00
Roxy-3D
3f5f39576b Reprint option for last SD Memory card file (#8106) 
* Re-Print of same SD Memory Card file with single click

* Re-Print of same SD Memory Card file with single click
* This is the bugfix-v2.0.0 version of  https://github.com/MarlinFirmware/Marlin/pull/8104
 2017-10-26 15:50:18 -05:00
Thomas Moore
9e699811d2 Make LPC1768 pinmapping not specific to Re-ARM (#8063) 
* Merging early because of build failures.  See #8105

* Make LPC1768 pinmapping not specific to Re-ARM

* Add HAL_PIN_TYPE and LPC1768 pin features

* M43 Updates

* Move pin map into pinsDebug_LPC1768.h

* Incorporate comments and M226

* Fix persistent store compilation issues

* Update pin features

* Update MKS SBASE pins

* Use native LPC1768 pin numbers in M42, M43, and M226
 2017-10-26 13:37:26 -05:00
Scott Lahteine
3ac581eac9 Neopixel changes for parity with 1.1.x 2017-10-25 18:40:04 -05:00
jeffyl
7b3098bbd5 Add AZSMZ Mini (#8005) 
* Add AZSMZ Mini

* Remove tabs, adjust spacing

* Renumber boards to group by family

* Patch up spacing

* Tweak
 2017-10-25 01:16:54 -05:00
Scott Lahteine
e00ed10c4c GT2560 config MKS_MINI_12864 => SDSUPPORT 2017-10-25 01:12:48 -05:00
Scott Lahteine
10a5e4d80f Merge pull request #8078 from thinkyhead/bf2_mks_mini_lcd 
[2.0.x] Add MKS MINI 12864 support to GT2560
 2017-10-25 01:10:03 -05:00
Scott Lahteine
ee9b8bf0f1 Add MKS MINI 12864 support to GT2560 2017-10-24 19:15:41 -05:00
Scott Lahteine
f65fc7ffab Merge pull request #8044 from thinkyhead/bf2_mesh_consolidate 
[2.0.x] Simplify mesh bounds config
 2017-10-24 18:56:43 -05:00
Scott Lahteine
070cd34fe8 Merge pull request #8077 from thinkyhead/bf2_MKS_BASE_followup 
Clean up HAL trailing spaces, MKS SBASE pins
 2017-10-24 18:38:48 -05:00
Scott Lahteine
7f55d82fd1 Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h 2017-10-24 18:26:43 -05:00
Scott Lahteine
90a14b4f5b Clean up HAL trailing spaces, MKS SBASE pins 2017-10-24 18:20:23 -05:00
Thomas Moore
51fafccc16 [2.0.x] Enable hardware serial ports on LPC1768 (#8004) 
* Enable hardware serial ports on LPC1768

* Fix compilation errors with other HALs

* FIx order of includes in LPC1768 HAL main.cpp

* Add support for RX_BUFFER_SIZE and TX_BUFFER_SIZE options in Configuration_adv.h
 2017-10-24 17:28:33 -05:00
Scott Lahteine
580b6e9089 Apply physical limits to mesh bounds 2017-10-24 16:54:07 -05:00
Scott Lahteine
4e2baeb3e1 Update indentation, file-wrapping for Marlin 2.0.x 2017-10-24 16:54:06 -05:00
Scott Lahteine
60af705e6d Relocate SPI.h to the HAL folder 2017-10-24 16:54:06 -05:00
Scott Lahteine
46aae4c6e7 Merge pull request #8074 from thinkyhead/bf2_verbiage_like_8061 
Fix some config verbiage
 2017-10-24 15:25:12 -05:00
Scott Lahteine
3356d5a72d Merge pull request #8072 from thinkyhead/bf2_fix_M600 
[2.0.x] Fix position sync in M600 pause/resume
 2017-10-24 14:55:46 -05:00
Scott Lahteine
5f87324536 Fix some config verbiage 2017-10-24 14:53:42 -05:00
Scott Lahteine
272f9f65dc Fix some typos 2017-10-24 14:29:15 -05:00