f6ca5a8da8
Allow "M110 N123" without a checksum
2015-06-26 18:13:54 -05:00
aaad65ff5d
Include a comment documenting M110
2015-06-26 18:13:54 -05:00
862c72b030
Put the mandatory test of gcode_N first
2015-06-26 18:13:54 -05:00
30976f9773
Allow M110 to handle a second N argument
2015-06-26 18:13:53 -05:00
d135b15bb8
Init all endstop bits to 0 (PR#2332)
2015-06-26 07:10:22 -05:00
e09abb1b31
Merge Fix M600 (PR#2301)
2015-06-25 20:45:55 -05:00
5ccb1c9e7d
Use millis for M600 audio feedback interval
2015-06-25 20:45:03 -05:00
fb16a83b8a
Cleanup M600 documentation comments
2015-06-25 20:45:03 -05:00
97ec224d72
Replace target with destination in M600
2015-06-25 20:45:03 -05:00
4ce9ddbb74
Check the temperature before filament change
2015-06-25 20:45:03 -05:00
a1e8714d5f
Merge 'Ultimaker' (PR#2331)
2015-06-25 09:13:50 -05:00
b8b5762e55
Update Ultimaker URL
2015-06-25 09:12:44 -05:00
d5bfbf5a59
Added correct dutch translation for calibrate.
2015-06-25 09:12:44 -05:00
149c474e55
Updated Russian language (PR#2325)
...
Gleaned from
https://github.com/MarlinFirmware/Marlin/commit/4ac14a7e5fa8e6e395436664
8976eafd1ae220ae
2015-06-22 23:07:19 -04:00
722829b058
Move buzzing code to buzzr.h & buzzer.cpp (PR#2307)
...
at least the lcd independent part from Marlin_main.cpp.
2015-06-22 22:31:48 -04:00
c461975140
Rename and repair MELZI_1284 (PR#2301)
...
to MELZI_MAKR3D.
Fix for #2288
As the normal MELZI also can have a 1284.
2015-06-22 22:30:07 -04:00
1e9cf905c7
Enable ZigZag AutoBedLeveling on Deltas (PR#2273)
...
ZigZag has been disabled by fault due to do_topography_map
2015-06-15 20:26:25 -05:00
ec93383ec8
Add SanityCheck for bed probe position settings (PR#2282)
2015-06-15 20:22:44 -05:00
c2cef42f8e
Merge (PR#2285)
2015-06-15 20:21:01 -05:00
dc40a5f6e0
Patch up more outdated config lines
2015-06-15 20:20:32 -05:00
98c9111a7d
Update delta configs with latest settings
2015-06-15 20:20:32 -05:00
e6baf8afd9
Fix up allen key settings in delta configs
2015-06-15 20:20:31 -05:00
3b293fc5d1
Move Delta settings lower in delta files
2015-06-15 20:20:31 -05:00
df21857583
Move extruder offset settings next to extruders setting
2015-06-15 20:20:31 -05:00
2dd1859247
Cleanup spaces and comments in configs and conditionals
2015-06-15 20:20:31 -05:00
a274769f4f
Clean up spacing and comments
...
Also clean up some trailing spaces in a few other sources
2015-06-15 20:20:31 -05:00
d3bce05d54
Fix up spacing for filament sensor values
2015-06-15 20:20:31 -05:00
b4b10a57fe
Fix configurator section directives and values lists
2015-06-15 20:20:31 -05:00
bba14dcbe6
Move Z Safe Homing point to the middle of the movement range
2015-06-15 20:20:31 -05:00
06906bc1c8
Merge (PR#2295)
2015-06-15 20:18:21 -05:00
318318b02f
Add pins_RAMPS_13_EFB.h to reduce redundancy
2015-06-15 20:17:09 -05:00
346c8b339b
Remove a test from pins_RAMPS_13.h
...
- Add 3 new lines to `pins.h` to remove 2 redundant tests in
`pins_RAMPS_13.h`
2015-06-15 20:15:38 -05:00
b93cddfcc9
Add lost MKS_BASE to pins.h (PR#2297)
2015-06-15 10:23:46 -05:00
6ab7b560af
Rework buzzing (PR#2296)
...
by:
Moving HAS_LCD_BUZZ macro to Coditionals.h
Renaming HAS_LCD_BUZZ to HAS_BUZZER to make clear is has nothing to do with the lcd.
Removing the ULTRALCD condition.
Moving declaration of lcd_buzz() out of the ULTRA_LCD block in ultralcd.h
Moving definition of lcd_buzz() out of the ULTIPANEL block in ultralcd.cpp
Renaming lcd_buzz() to buzz() to make clear is has nothing to do with the lcd.
All buzzing code is now only dependent on the existence of a BEEPER-pin or the definition of a LCD_USE_I2C_BUZZER.
To do: Check the conditions for the BEEPER-pin in all pin-files.
2015-06-15 06:13:26 -05:00
29122db2fa
Fix ULTRA_LCD spelling in HAS_LCD_BUZZ
2015-06-15 06:12:34 -05:00
1418470ae9
Merge PR( #2271 )
2015-06-14 20:01:40 -05:00
1d94d098bf
Formatting tweaks as part of fixing issue 1497
2015-06-14 19:57:27 -05:00
e602c28ad9
Set auto fan pins to OUTPUT during init
...
Fixes the problem of these pins being left in INPUT state, as described
in #1497
2015-06-14 19:57:27 -05:00
90f858aa85
Use translated strings for axis movement (PR#2280)
...
Suggest we use the translated strings here. They use (except for
German) the phrasing “Move X” instead of just the axis letter, but they
should fit the available space. The “Extruder” string would be the
same, except it will be translated.
2015-06-14 08:16:00 -05:00
e2a4a83586
Don't re-apply Z_RAISE_BETWEEN_PROBINGS in probe_pt (PR #2281 )
2015-06-12 22:39:35 -05:00
6b1b3adaf0
Consistent punctuation in SanityCheck errors (PR#2283)
2015-06-12 09:31:02 -05:00
eb81982fcd
Fix error next command in autotune (PR#2274)
...
Now send only temperature for T or B, but not send OK.
Host interprets the line to show the right temperature, but not in
response to M105 then stop and send commands until it ends the autotune.
2015-06-12 07:10:38 -05:00
55b23c896a
Optimise out_of_range_error() (PR#2265)
...
by avoiding the strncopy()
2015-06-12 02:20:40 -05:00
b0860adab6
Fix volumetric multiplier display for filament sensor (PR#2264)
...
The volumetric multiplier display needs to be multiplied by 100 in order to make it an integer for display purposes.
2015-06-12 02:19:27 -05:00
45642b7fe8
Respect DISABLE_AXIS settings (PR#2216)
...
when DEFAULT_STEPPER_DEACTIVE_TIME is over
instead of simply turn off all.
2015-06-11 11:35:05 -05:00
c85a486445
make the dual z-endstop optional (PR#2277)
...
it's disabled by default
2015-06-10 15:45:59 -05:00
962b107341
Prevent current_command_args from bypassing nul (PR#2270)
2015-06-09 16:07:10 -05:00
4061279218
Merge pull request #2260 from Wackerbarth/DropArduino0.x.x
...
Deprecate Support for Arduino IDE < 1.0.5
2015-06-08 17:16:25 -05:00
06ae832276
Deprecate Support for Arduino IDE < 1.0.5
...
Note that newer versions of the IDE can still
be made to support compilation for the older boards.
2015-06-08 17:15:28 -05:00
4c3ca0b5b6
Deprecate Support for Arduino IDE < 1.0.5
...
Note that newer versions of the IDE can still
be made to support compilation for the older boards.
2015-06-08 17:15:28 -05:00
