bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
12,572 Commits 1 Branch 4 Tags 151 MiB
82cafc9b19
Commit Graph

10689 Commits

Author SHA1 Message Date
Scott Lahteine
a0dadc8c62 Smaller I2CPositionEncoder strings 2019-02-12 16:21:56 -06:00
Scott Lahteine
18996d2595 Fix some spelling 2019-02-12 16:21:56 -06:00
revilor
e56c13670d Service interval watchdog (#13105) 2019-02-12 15:58:56 -06:00
InsanityAutomation
7f1b69b0c8 Add HOST_PROMPT_SUPPORT (#13039) 2019-02-12 15:55:47 -06:00
Scott Lahteine
0feeef2604 Update copyright in headers 2019-02-12 15:30:11 -06:00
Scott Lahteine
894f5c24a8 Fix trailing whitespace 2019-02-12 14:25:57 -06:00
Roman Moravčík
bace52afd7 Fixed compilation with MMU2_MENUS disabled (#13140) 2019-02-12 12:55:49 -06:00
Ludy
584f9cd449 Update German language (#13137) 2019-02-12 12:54:57 -06:00
Scott Lahteine
d9a3fea022 Comments in HAL_spi_STM32F1.cpp 2019-02-11 18:06:33 -06:00
Giuliano Zaro
773fa5c40f Fix define used when PID is off (#13119) 
Replaced `PID_MAX` with `BANG_MAX` since it should be the correct define to be used when PID is not enabled.
 2019-02-11 17:29:17 -06:00
Giuliano Zaro
f7efe6f6c5 [2.0.x] Fix TEMP_STAT_LED startup init (#13120) 2019-02-11 17:27:59 -06:00
Ludy
2bd6ce4b62 Update German language (#13125) 2019-02-11 17:08:21 -06:00
Giuliano Zaro
27115ff7eb Update Italian language (#13123) 
Incomplete.
 2019-02-11 17:07:21 -06:00
Roman Moravčík
08a8bd10ca Updated Slovak translation (#13122) 2019-02-11 17:06:10 -06:00
Scott Lahteine
3e2a4c3b26 Show mixer and temperature menus while printing 2019-02-11 16:52:47 -06:00
Scott Lahteine
8d271f20fe
C10mini E steps of 95 
See https://www.patreon.com/posts/creality-cr10-24602624
 2019-02-10 14:23:05 -06:00
Scott Lahteine
9737608f0a Enable gradient when alias is cleared 2019-02-10 06:39:12 -06:00
Simon Jouet
5cd0fa3ce1 Basic GPIO expander using the ESP32 I2S peripheral (#12959) 2019-02-10 05:40:31 -06:00
Scott Lahteine
3983cacbcf No extern needed for func decl 2019-02-10 05:38:27 -06:00
Scott Lahteine
43b29c093b Update pinsDebug_list.h with XY PWM pins 2019-02-10 05:13:05 -06:00
Scott Lahteine
166e567ab8 Fix HAS_MOTOR_CURRENT_PWM 2019-02-10 05:06:46 -06:00
Scott Lahteine
6de3d34378
M166 Gradients, LCD Menu for 2-channel Mixer (Geeetech A10M/A20M) (#13022) 2019-02-10 04:54:23 -06:00
LinFor
7ee35c2611 PID_MENU option to save PROGMEM in LCD menus (#13095) 2019-02-10 04:03:18 -06:00
Ludy
936f982392 Update German Language (#13110) 2019-02-10 03:55:08 -06:00
AnHardt
0e37fe8776 Apply minimum C in M303 (#13113) 
Apply minimum `C` in `M303`. `PID_autotune()` needs to be called with a 'C'ycles-parameter >2 to give meaningful (different from 0) PID-factors. Therefore silently raise C to 3. Fixing one aspect of #13104
 2019-02-10 03:54:45 -06:00
Scott Lahteine
5a316664e5 Update chopper timing 2019-02-10 03:12:20 -06:00
Scott Lahteine
fcb16ceb29 Update default config 2019-02-10 00:20:11 -06:00
Alain Martel
9ae7cca5e9 Disable RGB_LED for 3DFabXYZ (#13097) 2019-02-08 15:18:20 -06:00
Scott Lahteine
f3b6cb4d34 Clean up, update config comments 2019-02-08 15:13:52 -06:00
Scott Lahteine
ae03753ef1 Fix PCA9533 with PRINTER_EVENT_LEDS 2019-02-08 15:13:52 -06:00
Scott Lahteine
95d3f3953a DEFAULT_WEBSITE_URL => BOARD_WEBSITE_URL 2019-02-08 14:54:34 -06:00
Scott Lahteine
6ddd81c178
[2.0.x] Update German Language (#13100) 
add MMU2
 2019-02-08 14:25:24 -06:00
Giuliano Zaro
7c9ff322f3 Update Italian language (#13099) 2019-02-08 14:23:37 -06:00
Ludy
ce8cb6a5d9 [2.0.x] Update German Language 
add MMU2
 2019-02-07 20:04:34 +01:00
Scott Lahteine
f269766408 Put the MMU2 menu with the others 2019-02-06 17:38:46 -06:00
Marcio Teixeira
e1604198ff G425 — Auto-calibrate Backlash and Nozzle Offsets (#13050) 2019-02-06 17:20:17 -06:00
Marcio Teixeira
113af46a1b Add ExtUI methods to babystep probe/nozzle offsets (#12590) 2019-02-06 07:16:54 -06:00
InsanityAutomation
413e303ad5 More Advanced Pause options (#12984) 2019-02-06 06:39:42 -06:00
Mark Zachmann
19cf72e057 Support individual solenoid disable with M381 (#13008) 2019-02-06 06:34:53 -06:00
teemuatlut
d81342254a Support new TMC drivers (#13026) 2019-02-06 06:33:14 -06:00
Scott Lahteine
e1587da228
Clean up HAL_spi_Due.cpp (#13087) 2019-02-06 06:31:31 -06:00
Rolf Werum
524c6c10bf MAGNETIC_PARKING_EXTRUDER (#12351) 2019-02-06 06:30:53 -06:00
Scott Lahteine
1bd9a63049 Add HAS_EXTRA_ENDSTOPS macro 2019-02-06 05:10:05 -06:00
Scott Lahteine
3c49396370
Fix compile error with DUE + MAX6675 (#13086) 2019-02-05 22:56:13 -06:00
Roxy-3D
ab6908a513
Fix Probe Offset bug... 2019-02-05 20:30:20 -07:00
revilor
69aaf5d096 MMU2 fixes (#13082) 2019-02-05 20:56:22 -06:00
Scott Lahteine
2f8e89adc3 Remove extraneous ui. prefixes 2019-02-05 19:04:37 -06:00
Scott Lahteine
870757aa17 Tweaks to pins_GT2560_V3.h 2019-02-04 22:52:50 -06:00
Scott Lahteine
b96cc30cd0 HAL spacing tweak 2019-02-04 21:51:06 -06:00
Scott Lahteine
9e394139e5 Followup to 90911104 2019-02-04 10:46:52 -06:00
Sam Lane
b35a7c2c87 Fixed closed-loop planner stall (#13005) 2019-02-04 07:43:09 -06:00
Ludy
691e925adc Update German language (#13012) 2019-02-04 07:25:07 -06:00
Scott Lahteine
1497fb388a
M29 match logic was reversed (#13013) 
* M29 logic was reversed 

If in card-saving mode generate errors line errors for anything that's *NOT* "M29 ?"

* Update queue.cpp

* Update queue.cpp
 2019-02-04 07:23:42 -06:00
Scott Lahteine
b5fd2fb58b Allow M29 to be processed late 2019-02-04 07:23:02 -06:00
Scott Lahteine
c03bac9ad4
Update queue.cpp 2019-02-04 07:17:40 -06:00
Scott Lahteine
a49f0205ea
Update queue.cpp 2019-02-04 07:11:08 -06:00
Andy Shaw
9091110460 LPC1768 - Don't change CS pin state (#13015) 2019-02-04 07:08:39 -06:00
Scott Lahteine
10d855cb21 Sanity check USER_GCODE formatting 2019-02-04 06:36:41 -06:00
Scott Lahteine
d97bb4c41c Followup to e10943d0 2019-02-04 06:11:31 -06:00
jeffstaley
2f176d6fb8 Flush RX buffer on G-code line errors to prevent hang (#13018) 2019-02-04 06:03:49 -06:00
Scott Lahteine
ca73b2f465 Add static assert to catch errors in COPY(a,b) 2019-02-04 05:52:32 -06:00
Nathan
df1043516e Fix the delta homing issue (#12974) 2019-02-04 05:25:50 -06:00
Scott Lahteine
4200bd2fc1
Report on M92 with no arguments (#12833) 2019-02-04 05:24:15 -06:00
Scott Lahteine
e10943d0d8 Minor tweak to main menu 2019-02-04 04:58:31 -06:00
Scott Lahteine
d4d1b28a06 Fix some include paths 2019-02-04 03:57:15 -06:00
Scott Lahteine
0d720a6ff4 Tweak to emergency_parser.h 2019-02-04 03:56:56 -06:00
Scott Lahteine
0a7ea7063f Hide Resume Print when not relevant 2019-02-04 03:02:44 -06:00
Scott Lahteine
afe79ba22b Minor code cleanup 2019-02-04 02:23:06 -06:00
Scott Lahteine
fdb97a3e9c Add class and macro to save and auto-restore a variable 2019-02-04 02:23:06 -06:00
Scott Lahteine
433518de74 Prevent M420 error from disconnecting OctoPrint 
Just echo the error instead of labeling it `Error:`.
 2019-02-04 01:54:43 -06:00
Marcio Teixeira
5cfc1cdacc Support SWITCHING_NOZZLE with 2 servos (#13054) 2019-02-04 00:19:56 -06:00
Psycho
3c88cac2e9 Velleman Vertex Delta pins (#13072) 2019-02-04 00:15:08 -06:00
Nicolas G
6fb4001b58 Add option to disable fan speed slowing in M303 (#13066) 2019-02-04 00:12:41 -06:00
Scott Lahteine
ca1be02bf0 Tweak some pins formatting 2019-02-04 00:06:41 -06:00
Scott Lahteine
38c2ca9281 Clean up trailing whitespace 2019-02-03 23:00:57 -06:00
Mark Zachmann
4d1093b386 Fix init of last_direction_bits (#13067) 2019-02-03 01:29:00 -06:00
Scott Lahteine
4fa1c52688 Tweak serial output code 2019-02-03 01:09:14 -06:00
Scott Lahteine
a5e3384691 Pre-apply cosmetic changes to mixing 2019-02-03 01:09:14 -06:00
Scott Lahteine
0358ffcd4c Drop E element from homing_feedrate_mm_s 2019-02-02 15:55:00 -06:00
Scott Lahteine
95223cb28e Remove dead code from stepper.h 
These values are always supplied by `Conditionals_post.h`.
 2019-02-02 15:35:05 -06:00
mattfredwill
c3cb449990 TMC2130 dual-stepper Sensorless Homing (#13061) 2019-02-01 18:09:01 -06:00
Marcio Teixeira
f6edd2c472 Move stepper settings to "Advanced Settings" menu (#13063) 2019-02-01 18:07:04 -06:00
InsanityAutomation
68bbac207e Update pins_FORMBOT_TREX3.h (#13058) 2019-02-01 18:06:02 -06:00
revilor
6a57d0b381 Prusa MMU2 (#12967) 2019-01-31 19:10:52 -06:00
Scott Lahteine
996f7d1642 Fix I2C_POSITION_ENCODERS commentary 2019-01-30 22:17:17 -06:00
raTmole
988b5aa4e6 Update GT2560 V3 pins (#13036) 2019-01-30 21:10:56 -06:00
InsanityAutomation
7d927b6691 Move Z Probe Z Offset from Advanced to basic Configuration (#13056) 2019-01-30 21:08:36 -06:00
Giuliano Zaro
31e213e427 Always show Tune sub-menu (#13049) 2019-01-30 21:05:55 -06:00
teemuatlut
f0503372d9 Revert E_AXIS_N cast (#13055) 2019-01-30 20:55:05 -06:00
InsanityAutomation
a1d03fe7ba Fix single nozzle fan (#13038) 2019-01-30 20:54:04 -06:00
Scott Lahteine
159d7eefda New boards entry for the A20M 2019-01-28 21:08:20 -06:00
Scott Lahteine
97da6c1da5 Use MIN/MAX for min/max 2019-01-28 20:36:13 -06:00
Scott Lahteine
17a8c37148 Label menu edit items 2019-01-28 20:20:46 -06:00
raTmole
ddeca7a358 Fix resume from power loss G-Code. (#13035) 2019-01-28 13:19:26 -06:00
Thomas Moore
02ab66fca3 Update Cohesion3D Pins Files (#13027) 2019-01-27 23:11:33 -06:00
Giuliano Zaro
a79d80c78e Minor cleanup of pause code (#13030) 2019-01-27 23:10:25 -06:00
jeffstaley
0da636e1a3 Set correct stepper direction on reset (#13032) 
On a reset steppers were being initialized to incorrect direction. Original code wasn't respecting `INVERT_Z_DIR` define.
 2019-01-27 23:02:38 -06:00
Scott Lahteine
3845baf398 Followup to #12982 2019-01-27 22:53:46 -06:00
InsanityAutomation
48a3502656 Remote streamer improvements (#12982) 2019-01-27 22:43:13 -06:00
Scott Lahteine
621fbe99de Followup to #12817 2019-01-27 20:48:58 -06:00
Marcio Teixeira
f214118e45 Action to notify host of filament runout. (#12817) 2019-01-27 20:18:05 -06:00
Scott Lahteine
aad770bce8 Bring default configs in sync 2019-01-26 16:44:42 -06:00
jeffstaley
3f91233f6d
M29 logic was reversed 
If in card-saving mode generate errors line errors for anything that's *NOT* "M29 ?"
 2019-01-25 07:36:52 -08:00
jeffstaley
0e0cc13650 Fix M29 for Pronterface SD card upload (#13010) 2019-01-24 21:10:59 -06:00
Jiri
24fffb8d93 Fix undefined lcd_tmpfan_speed on NO_LCD_MENUS (#13006) 2019-01-24 16:34:40 -06:00
Scott Lahteine
8f9b246d0e Tweak some formatting, replace tabs 2019-01-24 13:18:56 -06:00
Bo Herrmannsen
808df82b36 Support for Anycubic I3 (#12972) 2019-01-24 12:40:49 -06:00
Scott Lahteine
ae91914260 Prevent name conflicts with mixed stepper drivers 2019-01-24 01:25:28 -06:00
Scott Lahteine
0eca236dcd Fix L6470 config comments 2019-01-24 00:58:16 -06:00
InsanityAutomation
f4d1f13358 Warn on cold extrusion, dont error 2019-01-24 00:16:14 -06:00
Scott Lahteine
aa74a900f5 Bring Rostock 301 and ArmEd configs up to date 2019-01-23 23:37:37 -06:00
Scott Lahteine
0f07ba4f09 Tweak some comments 2019-01-23 20:18:13 -06:00
Scott Lahteine
00cdd41b5f Clean up for recent changes 2019-01-23 20:08:58 -06:00
Roman Moravčík
7d53b79596 Update Slovak translation (#12991) 2019-01-23 19:48:16 -06:00
Giuliano Zaro
18c32996c1 [2.0.x] Updated Italian language (#12997) 2019-01-23 19:35:42 -06:00
Bob Kuhn
7c1a5e3c47 Fix TEMP_TIMER in pins_STEVAL.h (#12994) 2019-01-23 19:34:39 -06:00
Scott Lahteine
b4994ad12e Update language_it.h 2019-01-23 19:28:57 -06:00
Bob Kuhn
2f35747f29 L6470 SPI daisy chain support (#12895) 2019-01-23 19:06:54 -06:00
Scott Lahteine
6453b82a5e Clean up trailing whitespace 2019-01-23 15:57:01 -06:00
Scott Lahteine
48a581ba2e Tweak some HAL Due code 2019-01-23 00:53:20 -06:00
Marcio Teixeira
54fdf57b8c ExtUI: Fix fan wrapping around from 0 to 100 (#12987) 2019-01-22 23:33:10 -06:00
InsanityAutomation
dbe4126e07 Update language_en.h (#12988) 2019-01-22 23:32:01 -06:00
teemuatlut
e5801b75f8 Fix TMC-related compile issues. (#12971) 
- `STEALTHOP_[XYZE]` configuration options now set the default state.
 2019-01-20 23:54:57 -06:00
Gert-Jan Rodenburg
bb30927549 Fix pins for ZONESTAR_LCD with Zonestar ZRIB (#12956) 2019-01-20 23:52:51 -06:00
Ludy
dc65d96aca Fix TMC compile error (#12965) 2019-01-20 23:47:28 -06:00
InsanityAutomation
a1cf49935d Add laser control menu (#12883) 2019-01-20 23:41:47 -06:00
InsanityAutomation
75f2665f2e LCD SD Card items near top when not using wheel (#12926) 2019-01-20 23:24:53 -06:00
Scott Lahteine
e1f951813a Remove old block end comment 2019-01-20 02:30:03 -06:00
Scott Lahteine
52108192d1 Prevent L6470 class name conflict with drivers.h define 
Fix #12824
 2019-01-20 00:32:56 -06:00
Scott Lahteine
0495fcd475 Minor spacing fix 2019-01-20 00:10:50 -06:00
lanserge
c2cf8ffa82 Add support for Arduino DUE Shield Kit (#12950) 2019-01-19 23:43:32 -06:00
Scott Lahteine
4e5a915ef8 Fix some Makefile comments 2019-01-19 23:41:30 -06:00
Scott Lahteine
a5911765c3 Tweak some spacing 2019-01-19 20:27:57 -06:00
chrisly42
99e5e8362f Rapide Lite 200 config, pins_RL200 RUMBA clone (#12848) 2019-01-19 20:19:14 -06:00
Scott Lahteine
6411680364 Update some pins spacing 2019-01-19 19:21:52 -06:00
teemuatlut
8a3f1d6932 Fix chopper timing struct and initialization (#12943) 2019-01-19 18:57:02 -06:00
Ludy
c6991109b7 Update German language (#12953) 2019-01-19 18:50:24 -06:00
Giuliano Zaro
ca9eb14f6a Update Italian language (#12951) 2019-01-19 18:48:13 -06:00
Ludy
acf266fe78 Fix a compile warning, etc. (#12955) 2019-01-19 18:47:29 -06:00
Scott Lahteine
424aa05cc2 Fix some file endings 2019-01-19 18:19:12 -06:00
Scott Lahteine
ce563d7c2e Various general cleanups 
Mostly from the L6470-oriented PR
 2019-01-19 16:56:12 -06:00
Scott Lahteine
02cc63d6d4 Update CreatorPro Configuration_adv.h 2019-01-19 16:37:50 -06:00
Marcio Teixeira
f4c16e683b Follow up fixes to #12884 (#12940) 2019-01-17 18:48:29 -06:00
Scott Lahteine
712e23c383 Fix up some whitespace 2019-01-17 18:05:36 -06:00
Ziemowit
20c20dacb7 MKS SBASE needs DRV8825 (#12911) 2019-01-17 13:21:53 -06:00
Giuliano Zaro
7bb5d4bfe8 Small LED code reorganization (#12929) 2019-01-17 13:20:26 -06:00
teemuatlut
e6805582a6 M569 to change stepping mode. Add new TMC section to LCD. (#12884) 2019-01-17 13:17:16 -06:00
Bob Kuhn
d08f27e27b Add support for STEVAL 3DP001V1 (#12894) 2019-01-15 18:59:36 -06:00
Alain Martel
cdb562d558 Bring Migbot config up to date (#12916) 2019-01-15 18:53:07 -06:00
Giuliano Zaro
8f4c6e6d1a Fix case light on boot (#12919) 2019-01-15 18:50:56 -06:00
Marcio Teixeira
f11c6d5d02 Fix M107 when dual-nozzles share fan (#12819) (#12909) 2019-01-15 18:45:18 -06:00
Karl Andersson
64a4649290 STM32 - Fix SD write (#12897) 2019-01-15 18:44:22 -06:00
Ludy
294521439e Clean up Configuration_adv.h (#12900) 2019-01-15 18:42:10 -06:00
InsanityAutomation
59b18aaeef Allow resume from pause with parking enabled (#12893) 
Currently, Pause of an SD-Memory card print does not work.    This has been verified to resolve the issue by multiple people.   

I understand more work needs to be done to resolve some of the concerns...
 2019-01-15 07:58:54 -07:00
Giuliano Zaro
85f149befe Save some progmem (#12913) 2019-01-14 20:56:30 -06:00
mikeshub
7fde8d9d1e Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support (#12855) 
- Fix a bug in MAXxxxx thermocouple temp reporting.
- Add support for 3-wire HD44780.
- Add support for PCA9533 RGB driver.
- Add configuration examples for FlashForge CreatorPro.
 2019-01-14 14:29:55 -06:00
Scott Lahteine
3644c940bf Tweak SD section of Main Menu 2019-01-13 18:00:07 -06:00
teemuatlut
1a79878dff Remove TMC_Z_CALIBRATION in favor of Z_STEPPER_AUTO_ALIGN 2019-01-12 18:07:28 -06:00
Scott Lahteine
7cfce20cd3 Update comments on M125 2019-01-12 17:52:44 -06:00
Jason
dc4786a504 Config files for PowerWASP Printer (#12889) 2019-01-12 16:57:45 -06:00
Scott Lahteine
3e867008f0 Fix some HAL_STM32F1 type declarations 2019-01-12 16:21:11 -06:00
Scott Lahteine
eb78aed863
Rename LCD menus according to variable types (#12892) 2019-01-12 16:01:04 -06:00
InsanityAutomation
ed3ab5e212 Fix M24 not starting new job (#12887) 2019-01-12 15:30:44 -06:00
Nils Hasenbanck
f9299c4461 Make timer definition in pin files for STM32 possible (#12874) 
RemRam needs to redefine a particular timer to work correctly. The HAL did foresee this possibility and checks if the timer was already defined for either the stepper or temperature timer.

Prior to this commit the header file for the timers couldn't see those definitions in the pin file, but this commit will fix this.

Tested on an actual hardware to verify. (It wouldn't boot without it.)
 2019-01-12 14:40:49 -06:00
InsanityAutomation
082f6a27de ADAPTIVE_FAN_SLOWING extension to hotend thermal protection (#12853) 2019-01-12 00:41:48 -06:00
Scott Lahteine
459f4fef60 Fix Temperature::init bug with HEATER_4_PIN 2019-01-11 22:54:26 -06:00
InsanityAutomation
a403d9a50c Improve menu pause / resume (#12876) 2019-01-11 20:42:11 -06:00
Alain Martel
432c21456f Add 3DFabXYZ Migbot example config (#12775) 
Co-Authored-By: Alain Martel <alain74martel@gmail.com>
 2019-01-11 20:41:20 -06:00
Scott Lahteine
fb8111553e getStatus => report_status 2019-01-11 19:51:00 -06:00
Chris Pepper
2919f3045d [LPC176x] Update PIO extrascript (#12878) 2019-01-11 19:45:33 -06:00
Scott Lahteine
19fea772e5 Use E_AXIS_N where it makes sense 2019-01-11 19:42:34 -06:00
Scott Lahteine
0d30ccf767 Tweaks to TMC26XStepper 2019-01-11 19:42:34 -06:00
HackingGulliver
1fd8e2c649 Fix: Junction Deviation calculates wrong cos(theta) on CoreXY (#12879) 2019-01-11 19:25:48 -06:00
Scott Lahteine
b402040059 Split bed size sanity check into two 2019-01-11 15:49:57 -06:00
Chris Barr
1d33784bf9 Add RUMBA32 Board (#12856) 2019-01-10 19:34:31 -06:00
Ondřej Nový
a0ef6198ff Level bed corners Z-hop height option (#12858) 2019-01-10 19:15:17 -06:00
Karl Andersson
8ae6f1e556 Fix errors and some compiler warnings with HAL_STM32 PlatformIO build (#12869) 2019-01-10 19:01:31 -06:00
Scott Lahteine
e6484d9dab Return to status when SD card is removed 2019-01-10 15:43:31 -06:00
Scott Lahteine
5f2d75f45b Move PINS_DEBUGGING to @section develop 2019-01-08 20:05:05 -06:00
Scott Lahteine
da42f27c9e Use maths macros for ceil/floor 2019-01-05 21:21:02 -06:00
Ludy
de4561c980 VORON Add LCD option BEEP_ON_FEEDRATE_CHANGE (#12822) 2019-01-05 14:12:05 -06:00
Giuliano Zaro
709a6356f7 Remove obsolete test conditions (#12829) 2019-01-05 14:02:45 -06:00
Luu Lac
bcf347403b Fix M106 extruder & fan count (#12820) 2019-01-05 14:01:35 -06:00
Kaushik Vemparala
ba7e35cbab Add LCD option BEEP_ON_FEEDRATE_CHANGE (#12774) 2019-01-04 19:30:08 -06:00
jmz52
d372e7e477 SDIO support for STM32F1 (#12782) 2019-01-04 13:38:07 -06:00
Marcio Teixeira
6a8fb0f25f Simplify backlash compensation code. (#12813) 
- Use `TEST(dm,axis)` to determine directions instead of doing comparisons.
- Remove recomputation of `millimeters` and `delta_mm` since backlash compensation should not affect the distance over which material is extruded.
 2019-01-04 13:30:56 -06:00
luxflow
7f244f9b9c Update LPC SD pins for BIQU SKR (#12767) 
(Exactly matching the Azteeg X5 MINI Wifi)
 2019-01-03 10:44:00 -06:00
jmz52
813a4ea107 Add support for Mks Robin TFT display (#12706) 
* Add support for MKS Robin TFT display

- Add support for MKS Robin TFT display and encoder for MKS Robin board.
- Generic 128x64 UI with x2 upscale is used (for now).
- Tested on MKS Robin TFT V2.0 with ST7789V controller.
 2019-01-03 10:38:39 -06:00
jmz52
c4237b529f Fix MKS Mini and SD card conflct over SPI mode (#12783) 2019-01-03 10:27:53 -06:00
Phr3d13
01f75591c6 Fix GTM32_PRO_VB Serial and HAL via watchdog (#12753) 
Move `watchdog_reset` from `.h` to `.cpp` to eliminate the need to include `MarlinConfig.h` in a HAL-related file.
 2019-01-03 09:46:49 -06:00
Scott Lahteine
288340cb6c Followup to VORON 2019-01-03 09:14:14 -06:00
Scott Lahteine
2aaa681dea Remove unused Cheaptronic pins 2019-01-03 08:58:55 -06:00
Marcio Teixeira
81e753064a Fix ExtUI compile warnings and error (#12799) 2019-01-03 08:36:43 -06:00
Ludy
74c47803f7 Add VORON printer (#12705) 2019-01-03 06:27:03 -06:00
kAdonis
637fb20c75 Allow 4 fan animation frames (#12772) 2019-01-03 06:03:06 -06:00
petieken
d9cf5e4883 Update pins_BIQU_SKR_V1.1.h (#12758) 2019-01-02 13:50:05 -06:00
TheLongAndOnly
cb643d87df Adding missing code for triple Z-stepper auto-align (#12786) 2019-01-01 18:22:04 -06:00
Ludy
14a7faf087 Fix compile warning comparison uint and int (#12788) 2019-01-01 18:20:12 -06:00
Marcio Teixeira
60cb36bef3 Misc. improvements (#12747) 
* Make ExtUI respect MAXTEMP limits
  - Temperatures are now clamped by MAXTEMP limits rather than arbitrary values.
* Speed up USB init, add status
  - Speed up USB initialization
  - Show status message if init failed
* Enable status messages for EXTENSIBLE_UI
* Adjust max limit to MAX_TEMP - 15
* Misc. tweaks to formatting, const, etc.
 2019-01-01 15:17:48 -06:00
InsanityAutomation
4f2473053c Fix M106 with SINGLENOZZLE 2018-12-31 20:10:18 -06:00
Reece Kibble
7557f8d68c Rename all Stm32f1 to STM32F1 (#12639) 2018-12-31 16:36:49 -06:00
Scott Lahteine
371d9a1acf Fix line-endings, formatting, whitespace 
Followup to #12770
 2018-12-30 15:38:20 -06:00
Ludy
135c74017c Fix compile DEBUG_EEPROM_READWRITE error (#12746) 2018-12-30 11:37:20 -06:00
Giuliano Zaro
54ba44ee37 Fix bad sanitycheck (#12748) 2018-12-30 10:44:15 -06:00
swilkens
b01a630bd0 [2.0.x] Correct Ender 3 bed size (#12769) 2018-12-30 10:42:47 -06:00
Alain Martel
44ed34475b Add MKS BASE 1.4 pins (#12770) 2018-12-30 10:40:22 -06:00
Roxy-3D
3a16cb6d7f
Slightly Slower Max X Axis speed 
On some T-Rex 2+ machines the previous max step rate could lose steps....
 2018-12-28 09:14:48 -06:00
Ludy
814d93c7cf Fix G33 sprintf output warning (#12738) 2018-12-27 18:05:42 -06:00
Ludy
3877bf9704 Fix compile error with delta and sensorless homing (#12740) 2018-12-27 17:51:22 -06:00
Ludy
cfc5e96b4b Move JD to Config.h (and fix jerk->eeprom bug) (#12720) 2018-12-27 15:29:39 -06:00
Roman Moravčík
594898aea7 Limit hotend / bed temperature to maxtemp-15 (#12713) 2018-12-27 11:46:05 -06:00
InsanityAutomation
530ef5846f Make nomove=false for toolchange on filament swap (#12739) 2018-12-27 11:38:35 -06:00
InsanityAutomation
14ddda285c Confirmation on Abort SD print (#12717) 2018-12-27 11:36:39 -06:00
Msq001
f8c5d31864 Bugfix 2.0.x add motherboard pins define (#12689) 
- `pins_BIQU_B300_V1.0.h` defines pins for B300, as found in the BIQU Thunder 3D printer.
- `pins_BIQU_SKR_V1.1.h` defines pins for bigtree/BIQU SKR V1.1 motherboard.
 2018-12-27 10:52:35 -06:00
InsanityAutomation
b7a8dcc35d Update Formbot T-Rex 3 pins (#12662) 2018-12-20 17:32:39 -06:00
Ludy
f7127c44f8 Wanhao Duplicator i3 Plus pins create (#12701) 2018-12-20 17:30:36 -06:00
jmz52
33abb86b7e Add support for MKS Robin board (#12650) 
Implement initial support for MKS Robin (STM32F103ZET6) board.
Custom build script is used to generate encrypted firmware compatible with original MSK Robin bootloader (i.e. safe firmware update from SD card and possibility to go back to original close-source firmware).
 2018-12-20 17:23:27 -06:00
InsanityAutomation
367a9f65aa Add Formbot 350c Thermistor (#12661) 2018-12-20 17:04:17 -06:00
Ludy
33f3c75213 GTM32 Pro VB FAN-PIN correction (#12666) 2018-12-20 16:42:15 -06:00
Scott Lahteine
9d59a9c840 Followup to #12691 (typo) 2018-12-20 16:38:32 -06:00
Ludy
3829d6ccf8 FYSETC F6 13 - E2_SERIAL_TX_PIN correction (#12667) 2018-12-20 16:11:33 -06:00
Kadah
d35dcafa3d Added MKS MINI 12864 support to FYSETC F6 V1.3 (#12656) 2018-12-20 16:10:49 -06:00
Roman Moravčík
98cf546771 Limit set hotend temperature to maxtemp. (#12690) 2018-12-20 15:56:37 -06:00
Roman Moravčík
4dad489a50 [2.0.x] Limit PID autotune target to maxtemp-15 (#12691) 2018-12-20 15:55:30 -06:00
Marcio Teixeira
8dcc28c9ae Squelch warning mentioned in #11061 (#12676) 2018-12-20 15:34:24 -06:00
Ondřej Nový
4c8a6eee7b [2.0.x] Update Czech translation (#12683) 2018-12-20 15:28:46 -06:00
Ondřej Nový
fcaed685b2 [2.0.x] Set DEFAULT_NOMINAL_FILAMENT_DIA to 1.75 in Anet A6 config (#12664) 2018-12-18 13:35:59 -06:00
Ondřej Nový
0572be9439 [2.0.x] Enable PIDTEMPBED in Anet A8 example config (#12655) 2018-12-18 13:34:46 -06:00
Luc Van Daele
c6e09c2689 [2.0.x] G33 clean up (#12648) 
Remove obsolete workarounds in G33 for the now fixed zprobe_zoffset bug
 2018-12-18 12:43:38 -06:00
teemuatlut
7a5e637a37 Add spreadCycle parameter sets (#12645) 2018-12-18 12:42:14 -06:00
Marcio Teixeira
902d5b0f8b Allow ExtUI to use LCD_SET_PROGRESS_MANUALLY (#12628) 2018-12-12 17:21:37 -06:00
Dave Johnson
9a4a463ec4 Sanity-check LIGHTWEIGHT_UI, move comment up (#12630) 2018-12-12 16:59:20 -06:00
teemuatlut
55144284c2 TMC connection test, spreadCycle parameters, improved debugging (#12616) 2018-12-09 20:54:48 -06:00
Ludy
97de9d54a5 Fix broken pins file include (#12617) 2018-12-09 19:06:03 -06:00
Ludy
a7b3a61424 Improve some config comments readability (#12615) 2018-12-09 19:02:42 -06:00
Scott Lahteine
daf07e4200 Align classic bed icon consistently 2018-12-09 12:00:10 -06:00
MasterPIC
3bb8b3529a Center ABL grid on bed with H parameter. (#12610) 2018-12-09 11:24:48 -06:00
Scott Lahteine
6cf8d40f41 Fix some serial echos of pin states 2018-12-09 02:38:32 -06:00
Scott Lahteine
f6321f878a
Simpler AVR + Trinamic + Soft Serial sanity-check (#12606) 2018-12-08 23:34:26 -06:00
Scott Lahteine
7d15854514 Add Z_MIN_PROBE_PIN to MKS SBASE pins 2018-12-08 15:31:59 -06:00
Scott Lahteine
e8bda62d2a Followup to servo angles patch 
Fix #12594
 2018-12-08 15:31:59 -06:00
Scott Lahteine
18fedafbc5 Refresh screen on SD Init 2018-12-08 15:31:59 -06:00
Marcio Teixeira
b22716e938 M425 Backlash Correction (#11061) 2018-12-08 14:36:46 -06:00
Scott Lahteine
fa47ce369a Sanity-check for negative steps, feedrate, accel 2018-12-07 19:38:15 -06:00
Scott Lahteine
ef81b5f03e Link to font docs in ultralcd_DOGM.cpp 2018-12-07 19:10:55 -06:00
Scott Lahteine
4388015f1a Tweak config formatting 2018-12-07 16:57:14 -06:00
Scott Lahteine
b7e38ea249 Signal an invalid mesh for M420 enable / load 2018-12-07 16:14:11 -06:00
teemuatlut
50b2fbd031 Trinamic: Split stealthChop, improve driver monitoring, etc. (#12582) 2018-12-07 15:34:21 -06:00
Scott Lahteine
9fbd73d931 Fix up some delta settings 2018-12-05 18:57:47 -06:00
Dave Johnson
0947b92734 Build and CI fixes and optimizations (#12584) 
-Disable LDF "deep+" mode on AT90USB platforms. Appears not needed any longer (likely due to fix 7322df26ad). Results in identical binary output and cuts compile time in half
-Disable Cartesio config from CircleCI (compile failure)
-Disable Geetech I3 Pro X GT2560 from CircleCI (compile failure)
-Enable EEPROM on Micromake example config (fix compile failure)
-Move FolgerTech/i3-2020 to AVR platform in CircleCI (fix CirculeCI build failure)
-Disable various examples failing to build in CircleCI
-Enable various examples no longer failing to build in CircleCI
 2018-12-05 17:21:40 -06:00
mr-miky
11c7945365 Don't include STM32 Core code when compiling STM32 Generic (#12575) 2018-12-03 06:55:49 -06:00
Scott Lahteine
64389acdf1 Print a space after scrolling status 2018-12-03 06:17:09 -06:00
Scott Lahteine
7a361ad36a
Alternative fan image option (#12579) 
* Alternative fan bitmap
* Move bed over by 3px
 2018-12-03 05:55:33 -06:00
Scott Lahteine
261c6f4b96 Fix pause/resume SD print 
Followup to #12551, addressing #12566
 2018-11-30 19:23:08 -06:00
Scott Lahteine
2224a4d61a Remove AVR-only MARLIN_DEV_MODE code 2018-11-30 17:54:24 -06:00
Scott Lahteine
e874f9664c Tweaks to endstops code 2018-11-30 14:25:55 -06:00
Scott Lahteine
3c58b16c9f
Move stepper enable/disable to stepper_indirection.h (#12562) 2018-11-30 12:48:46 -06:00
Scott Lahteine
aaf862aef2
Fix angles for disabled EDITABLE_SERVO_ANGLES (#12559) 2018-11-30 12:31:42 -06:00
Scott Lahteine
c986239837
A single SERIAL_ECHO macro type (#12557) 2018-11-29 16:58:58 -06:00
Scott Lahteine
69d869c3d9 Tweak FR icon. Update font data. 2018-11-29 12:59:30 -06:00
Scott Lahteine
0c1cd9f590 Fix "No SD Card" indicator 2018-11-29 12:35:31 -06:00
Jacob Jordan
8be91677df Fix Skew factors (#12555) 
- Ensure Skew factors are calculated from test square measurements
 2018-11-29 11:39:31 -06:00
Scott Lahteine
03ef2d6c82
Fix "paused" message and M125 called by M25 (#12551) 2018-11-28 19:28:31 -06:00
Scott Lahteine
95d154a91f Fans loop macro 2018-11-28 16:45:08 -06:00
Scott Lahteine
61db0b65b6 Followup to heating progress 2018-11-28 14:47:43 -06:00
Scott Lahteine
4f9ec9ab45
Add heating progress bars (#12543) 2018-11-27 21:15:52 -06:00
Scott Lahteine
929a513a6b
Add poll_runout_states, which returns 1 for runouts (#12547) 2018-11-27 20:13:24 -06:00
Scott Lahteine
01b5c810d5 Space out multiple edit lines a bit 2018-11-27 18:10:19 -06:00
Scott Lahteine
cd88ea2106 Fix runout debug output 
Followup to #12544
 2018-11-27 18:10:19 -06:00
Scott Lahteine
cecc238f68 Save recovery info on SD pause 2018-11-27 14:42:19 -06:00
Marcio Teixeira
439a3e8463 Improve runout sensor, fix LIGHTWEIGHT_UI screen size (#12544) 2018-11-27 13:45:25 -06:00
Scott Lahteine
5b24ce9024 Hide M217 compile warning 2018-11-26 16:52:16 -06:00
David Bates
d94b50a3d8 Add sample config for Delta with MKS SBASE (#10819) 2018-11-25 21:23:02 -06:00
InsanityAutomation
dec721c52b Add Formbot Raptor2 and Raise3D pins (#12532) 
* Add Formbot Raptor2 board
* Add Raise3D Rumba board
 2018-11-25 19:56:06 -06:00
Scott Lahteine
6aae199572 Add missing boards to Makefile 2018-11-25 19:11:09 -06:00
Scott Lahteine
0a638cc022 Adjust Formbot Raptor pins 2018-11-25 18:35:45 -06:00
Ludy
e5019a0481 Fix English special symbols (#12529) 2018-11-25 18:19:12 -06:00
Scott Lahteine
09d6db491a Fix wait_for_bed compile error 2018-11-25 18:05:41 -06:00
Roman Moravčík
d545f984b0 Update Slovak translation (#12523) 2018-11-25 17:44:51 -06:00
Ludy
730f223100 Correct FANMUX2_PIN (#12538) 2018-11-25 17:27:41 -06:00
Yücel Temel
d857cdfb27 Update Turkish language (#12524) 2018-11-25 17:26:26 -06:00
Scott Lahteine
4a7c6f7241 NUM_ARRAY => COUNT 2018-11-24 00:27:45 -06:00
Giuliano Zaro
31113c5adf Update Italian language (#12512) 2018-11-24 00:26:54 -06:00
Scott Lahteine
b57343c255 Put status screen options in Configuration_adv.h 2018-11-23 23:15:07 -06:00
Scott Lahteine
1fcc13b011 Allow Serial Overrun Protection to be disabled 2018-11-23 21:07:38 -06:00
Scott Lahteine
29c53f2402 Hide some compile warnings 2018-11-23 21:07:38 -06:00
Scott Lahteine
caca3c8503 Use wait_for_bed with WAIT_FOR_BED_HEATER 
Addressing #12517
 2018-11-23 20:39:23 -06:00
Scott Lahteine
f1efcfed14 Fix backslash in language_test.h 2018-11-23 20:39:23 -06:00
Yücel Temel
3b186a55ac Don't show superscript ³ with NOT_EXTENDED_ISO10646_1_5X7 (#12513) 2018-11-23 20:16:51 -06:00
Scott Lahteine
82c96c971e Bring superscripts slightly lower in BDF fonts 2018-11-23 20:02:34 -06:00
Sinisa Culic
8a0992d921 Fast PWM for controller fan (#12485) 2018-11-23 16:03:39 -06:00
Ludy
e98d195901 Remove extra declarations in cardreader.cpp (#12520) 2018-11-23 15:58:20 -06:00
Scott Lahteine
fd2998efd5
Revert ADC_KEYPAD direction behavior (#12508) 2018-11-22 06:00:00 -06:00
Scott Lahteine
d29cb09b3e Fix a minor compile warning 2018-11-22 05:35:38 -06:00
Yücel Temel
5b1d52671c Use superscript 3 in language_en.h (#12504) 2018-11-22 02:27:28 -06:00
Marcio Teixeira
7109dadd21 Additional pin definitions for Archim 2 (#12500) 
- Added GPIO pins to Archim 2
- Added new 108 pin to `fastio_Due.h`
 2018-11-22 01:07:02 -06:00
Andy Shaw
4975b13b74 Fix problems with LPC1768 EEPROM flash emulation (#12503) 
* Remove duplicate calls to PrepareSector

Some flash memory API calls require that a call to `PrepareSector` is done before use. However this call is already made by the LPC1768 framework so the calls in this code are not required.

* Ensure correct alignment of RAM buffer

The LPC176X flash API requires that the RAM buffer used for write operations must be word-aligned. This change ensures that this is the case.
 2018-11-22 01:03:32 -06:00
Scott Lahteine
b738972e69 General cleanup of Re-ARM pins 2018-11-21 19:00:49 -06:00
Scott Lahteine
ee423dcdd0 Invert hotend bitmaps, by default 2018-11-21 01:02:06 -06:00
Scott Lahteine
c5642a894f
Fix ADC_KEYPAD middle button (#12493) 2018-11-20 21:39:30 -06:00
Scott Lahteine
0946cbcdca Revert some const changes (for now) 2018-11-20 08:19:48 -06:00
Scott Lahteine
4def8b3b5e Expanded options for _Statusscreen.h (#12455) 
See the PR for full details. The updated system will be documented on the website in the near future.
 2018-11-20 07:50:37 -06:00
Scott Lahteine
d51e5690f4 Don't show updir with no card present 2018-11-20 07:01:46 -06:00
Scott Lahteine
ec9d21a234 Shift YZ on graphical display to fit Z+123.45 2018-11-20 06:58:18 -06:00
Scott Lahteine
817a37169a Apply/unapply const here and there 2018-11-20 06:44:21 -06:00
Scott Lahteine
643e0066a0 Followup to #12451 2018-11-20 06:27:19 -06:00
Marcio Teixeira
4bcb63b705 Fix for #12482 (#12483) 
Fix Z-move to uninitialized position in SWITCHING_EXTRUDERS tool_change (no_move=true)
 2018-11-20 00:04:11 -06:00
Marcio Teixeira
50ee747787 Fix compilation errors. Followup to #12439 (#12481) 2018-11-20 00:02:13 -06:00
Ludy
90a58488b5 Corrected unused var, default switch, Travis tests (#12477) 2018-11-19 23:59:48 -06:00
Scott Lahteine
a4c15dc54f
Modify MBL to use IJ instead of XY (#12478) 2018-11-19 09:08:15 -06:00
Scott Lahteine
fc3f1c4572 Get u8g reference for lcdprint 2018-11-19 06:23:15 -06:00
Scott Lahteine
88c57eaf55
Clean up some u8g code (#12476) 2018-11-19 01:33:59 -06:00
Ludy
1f93d2bcf7 Fix LCD compile error, etc. (#12472) 2018-11-18 20:39:49 -06:00
Scott Lahteine
826d570162
Combine Travis CI option-setting commands (#12474) 2018-11-18 19:58:02 -06:00
Scott Lahteine
9d13f07d09 GTM32 Pro VB changes from Markku Sinisalo 2018-11-18 19:56:38 -06:00
Roman Moravčík
5fbe5cabc8 Fixed displaying of kill MSG_OUTAGE_RECOVERY string. (#12470) 2018-11-18 18:05:29 -06:00
kAdonis
4ae9a06c60 Update M303.cpp (#12471) 2018-11-18 18:04:51 -06:00
Ludy
c0b75f49b6 Fix "no effect" and "unused variable" compile warnings (#12473) 2018-11-18 17:54:00 -06:00
Nils Hasenbanck
5a4fd8e0a6 Fix access to the DWT peripheral for STM32 HAL (#12434) 
Access to the DWT peripheral for the `CYCCNT` register needs to happen before `main()`. The code needs to be called after the setup of the system clocks, so the right place is between the `premain()` and `main()` function of the STM32 Arduino core.

This patch moves the DWT access code to a new function, which is then placed between `premain()` and `main()`.
 2018-11-18 01:30:46 -06:00
Scott Lahteine
7f225b9421 Fix MAX_MESSAGE_LENGTH 2018-11-18 01:11:26 -06:00
Scott Lahteine
06674a321a Remove extra include 2018-11-18 00:34:07 -06:00
Marcio Teixeira
c1e17037e5 Various fixes for MarlinUI and ExtUI (#12439) 2018-11-17 22:21:44 -06:00
Giuliano Zaro
d3605cfc26 Don't start watching heaters when target is 0 (#12453) 2018-11-17 21:53:52 -06:00
Ludy
93e958f695 Fix compile error with ZONESTAR_LCD+NO_LCD_MENUS (#12466) 2018-11-17 21:21:30 -06:00
Ludy
22d7fed60a Fix compile error with SD_FIRMWARE_UPDATE (#12462) 2018-11-17 21:13:36 -06:00
Nils Hasenbanck
779b2709ec Change temperature pin order for RemRam V1 (#12458) 
Beta testers suggested to adopt the RAMPS order of temperature probe connectors. This commit fixes the order to the RAMPS order.
 2018-11-17 16:51:06 -06:00
Scott Lahteine
8ebb4dc294 Followup to static CardReader 2018-11-17 07:52:35 -06:00
Scott Lahteine
7ee5894360 Allow float XY probe offsets 
Responding to #12383

XY probe offsets should be integers because adding decimal points makes the code larger. But if decimals are very much wanted, this commit removes the old restriction.
 2018-11-17 07:44:47 -06:00
Giuliano Zaro
43ecdb606f Fix a compile warning (#12452) 2018-11-17 07:08:25 -06:00
Ph0non
984c4ba8c7 Enable SD Card on RepRap Display and RADDS (#12446) 
* Enable SD Card on RepRap Display and RADDS

Define the necessary pins in `pins_RADDS.h` (copied from the `RADDS_DISPLAY` section) for the use of the SD card slot on RRD.
 2018-11-17 06:59:40 -06:00
Ludy
56a94c2a26 Use 'target_extruder' in M104 as with M109 (#12448) 2018-11-17 06:55:25 -06:00
Scott Lahteine
66580f32c2
Make CardReader class static (#12451) 
* Make CardReader a static class
* Make CardReader flags into bitfields
 2018-11-16 22:39:16 -06:00
Scott Lahteine
3e9ffaddb6
Consolidate, optimize some LCD menu code (#12450) 2018-11-16 21:44:48 -06:00
Scott Lahteine
d97e31db4c
Optimize Power-Loss Recovery (#12440) 2018-11-16 20:47:07 -06:00
Mateusz Krawczuk
ca21ac6b9b Support two MAX6675 thermocouples (#8686) 2018-11-16 18:20:33 -06:00
Scott Lahteine
0e610815e4 No need for Cap:PAREN_COMMENTS 2018-11-16 04:28:40 -06:00
Scott Lahteine
7a075a5dc9 Tweak extruder errors 2018-11-16 01:32:21 -06:00
Scott Lahteine
2d92f333f5 Fix GcodeSuite::T active_extruder reference 2018-11-15 14:07:24 -06:00
Scott Lahteine
d2bb53702a
Optimize target_extruder, ignore T with mixing (#12432) 
* Optimize target_extruder, ignore T with mixing
* Give G-code Tn parity with tool_change
 2018-11-14 17:33:04 -06:00
Marcio Teixeira
5e586a6b39 Fix to runout sensor code. (#12431) 
- "old_state" is no longer a class static variable.
 2018-11-14 16:54:05 -06:00
Scott Lahteine
d82c350de7
Miscellaneous LCD code renaming, reordering (#12430) 
* Move special characters to language.h
* Apply some naming standards
* Clean up menu item draw functions
* Rename some Temperature methods
* UI => ExtUI
 2018-11-14 13:13:51 -06:00
Scott Lahteine
edfd106bc5
Rejigger Filament Runout class (#12428) 2018-11-14 11:45:57 -06:00
Scott Lahteine
f4c128ecaa
Move RRW keypad code to a common method (#12429) 2018-11-14 06:00:21 -06:00
Scott Lahteine
54ec5528a0 hasstatus => has_status 2018-11-14 01:34:28 -06:00
Scott Lahteine
ebf585b673 Fix an old sanity check 2018-11-14 01:15:35 -06:00
Ryan
052d102ded UltiMachine Archim 1 support (#12404) 2018-11-14 00:27:39 -06:00
Scott Lahteine
664e20754d Clean up pins files 2018-11-14 00:23:33 -06:00
Scott Lahteine
1eb5249598 Fix Formbot Trex-2+ configs 
Followup to #12422
 2018-11-13 21:53:54 -06:00
thiagodesacosta
075a22ed65 Update Portuguese-Brazilian translation (#12402) 2018-11-13 19:42:25 -06:00
Marcio Teixeira
3ceab8474c Add required "cardreader.h" include (#12419) 2018-11-13 17:12:44 -06:00
Giuliano Zaro
98c2fc4e42 Endstops fix followup (#12423) 
Followup to #12413
 2018-11-13 17:10:07 -06:00
Roxy-3D
f19fd642ce
Updates to Formbot T-Rex 2+ configuration files (#12422) 
Updates to Formbot T-Rex 2+ configuration files
 2018-11-13 13:48:35 -06:00
Roxy-3D
cda5ef08fa
Debug of G2-G3 for UBL (#12386) 
Changes only affect UBL.  Everything else is left alone.
 2018-11-13 11:20:21 -06:00
AnHardt
9ad3aed0ef Fix tool-change for MIXING_EXTRUDER with < 2 virtual tools (#12417) 
Fix #12416

Better handling of `ENABLED(MIXING_EXTRUDER) && !MIXING_VIRTUAL_TOOLS > 1` -  to not fall through to the general case. Fix compiler warnings for `#elif EXTRUDERS < 2`.
 2018-11-13 04:56:10 -06:00
Giuliano Zaro
d631267548 Refine endstops fixes (#12413) 
When endstops/probe are enabled `ENDSTOP_NOISE_THRESHOLD` calls to `update` are required to properly re-sync endstops/probe status.
 2018-11-13 04:31:58 -06:00
Scott Lahteine
0ee1a92971
Group status methods, share reset_status with Extensible UI (#12414) 
* Group status methods, share reset_status with Extensible UI
* Move common DOGM code to headers
 2018-11-13 01:47:45 -06:00
Scott Lahteine
690c4e8457 Clean TLM trailing whitespace 2018-11-13 00:03:34 -06:00
Scott Lahteine
143b2896e0
Add M412 to enable/disable filament runout detection (#12406) 2018-11-12 21:29:46 -06:00
Scott Lahteine
a163c89c6a Followup to 50af1d1 2018-11-12 20:31:53 -06:00
AnHardt
be6271767f Fix BABYSTEP_ZPROBE_OFFSET (#12408) 
Fix #12399

Did not compile without  `WATCH_HOTENDS || WATCH_THE_BED`.
Add condition to include "../../module/temperature.h".
 2018-11-12 17:44:21 -06:00
Scott Lahteine
50af1d1e08 Differentiate translated On/Off from Serial ON/OFF 2018-11-12 17:23:08 -06:00
Scott Lahteine
df907a905f Update UBL comments for debug change 2018-11-12 03:46:48 -06:00
Scott Lahteine
da17f8ad37 For now (!) don't synchronize in M204 and M205 
See if this has any deleterious effect on motion planning by slicers that inser their own jerk and acceleration controls. The problem I see is that these settings can take effect on blocks already in the planner, and the only way around this would be to shadow these settings in planner blocks and use the shadowed settings in the planner.
 2018-11-12 02:43:24 -06:00
Scott Lahteine
a3923424c7 Clean up LCD width/height determination 2018-11-12 02:37:40 -06:00
Scott Lahteine
a0c795b097
Encapsulate common display code in a singleton (#12395) 
* Encapsulate common LCD code in a singleton
* Depend more UBL code on UBL_DEVEL_DEBUGGING
  - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
 2018-11-11 12:16:24 -06:00
Scott Lahteine
9da6809ac3 Adjust some comment spacing 2018-11-11 11:28:50 -06:00
Scott Lahteine
471f403a67 Reduce code size with plain inlines 2018-11-11 08:36:10 -06:00
Scott Lahteine
30a49f5ee2 Apply extra condition to LCD_PROGRESS_BAR 2018-11-11 08:36:10 -06:00
Scott Lahteine
4e0c935959 Update HAL and libs formatting 2018-11-10 19:43:23 -06:00
Scott Lahteine
47483e8c17 Update Raptor config 2018-11-10 19:42:46 -06:00
Scott Lahteine
6093df11dc
Allow G26 to use the active extruder (#12387) 
* Make lcd_quick_feedback argument optional
* Add click_to_cancel option to wait_for_hotend/bed
* Have G26 use the active nozzle and wait_for_hotend/bed
* Use wait_for_release in UBL G29
* Add 'T' parameter to G26 for an initial tool-change
 2018-11-10 18:07:38 -06:00
articide
4260282df7 Tevo Little Monster example configuration (#12370) 2018-11-10 03:36:01 -06:00
Scott Lahteine
bed15fcd81 Tweak 'echo_not_entered' used by MBL's G29 2018-11-10 01:32:51 -06:00
Scott Lahteine
c239131ff5 Use 'serial_spaces' in 'print_2d_array' 2018-11-10 01:32:51 -06:00
Scott Lahteine
56150ec030 Add reference comments to MeshLevelingState 2018-11-09 21:31:20 -06:00
Ludy
24c5e57bb6 Update German language (#12379) 2018-11-09 15:25:29 -06:00
Giuliano Zaro
fd7fd55662 Solve endstops issues (#12382) 
- Partially reverts #11900 and tries to solve #12336
 2018-11-09 14:58:04 -06:00
Scott Lahteine
78ccedd6a8 Fix M91x sanity-check to permit TMC2660 
Fix #12362
 2018-11-09 05:48:15 -06:00
revilor
b60abc7c37 [2.0.x] Macro G-codes (#9365) 2018-11-09 05:25:08 -06:00
Giuliano Zaro
ccdbf20f60 Update Italian language (#12368) 2018-11-09 04:04:02 -06:00
Roman Moravčík
d08847b1a6 Update Slovak translation (#12376) 2018-11-09 04:03:07 -06:00
InsanityAutomation
7665dff58b No error on T0 with single-extruder and fix MIXING_EXTRUDER virtual tools (#12375) 2018-11-09 00:15:07 -06:00
Scott Lahteine
4ed6397e5d
More comprehensive NO_LCD_MENUS (#12367) 2018-11-09 00:07:16 -06:00
Scott Lahteine
9c8f083d6c Extend pins errors to include the processor 2018-11-08 22:25:59 -06:00
Scott Lahteine
525ea554a1 Remove obsolete comments 2018-11-08 10:55:18 -06:00
Scott Lahteine
ef724edd80 Apply HAS_LCD_MENU in EEPROM code 2018-11-08 10:03:05 -06:00
Scott Lahteine
b169320a03 Clean trailing whitespace 2018-11-07 02:40:18 -06:00
Scott Lahteine
81b1e9d272 Fix up xdiff, ydiff, zdiff in tool change 
Followup to #12137
 2018-11-06 22:56:33 -06:00
InsanityAutomation
6471a75a22 Combine more tool-change variables (#12137) 2018-11-06 22:22:20 -06:00
Scott Lahteine
147e270208 Restore GTM32_PRO_VB temp and heater pins 
Undo #12345
 2018-11-06 21:41:30 -06:00
Scott Lahteine
8def25e475 Set CUSTOM_MACHINE_NAME for some configs 2018-11-06 21:41:30 -06:00
Scott Lahteine
812f6a7dd7 Fix Resume from SD Pause 
In reference to https://github.com/MarlinFirmware/Marlin/pull/12098#issuecomment-436231690
 2018-11-06 21:09:37 -06:00
Scott Lahteine
4f72e041f2 Use card.stopSDPrint() for completeness 2018-11-06 20:55:17 -06:00
Scott Lahteine
488a17b3f5 Use IS_SD_PRINTING() more 2018-11-06 20:55:17 -06:00
Marcio Teixeira
4dbaa6369f Fix const pointer assignment compile error (#12350) 2018-11-06 19:49:39 -06:00
Giuliano Zaro
959ed32636 Update Italian language (#12352) 2018-11-06 19:30:24 -06:00
Roman Moravčík
812bfec65e Update Slovak translation (#12354) 2018-11-06 19:29:28 -06:00
Ludy
1624722566 Update German translation (#12355) 2018-11-06 19:28:40 -06:00
Scott Lahteine
e574f01568
More advanced pause tweaks (#12356) 
* Followup to LCD_TIMEOUT_TO_STATUS=0
* Make continuous purge screen fit 20x4
* Unify purge message modes
* Preserve last-set pause header mode
 2018-11-06 19:25:57 -06:00
Scott Lahteine
5a470d4a49 Apply some tool-change cleanup 2018-11-06 18:20:01 -06:00
Roman Moravčík
34ea458667 Fixed advanced pause messages (#12353) 2018-11-06 15:27:19 -06:00
Scott Lahteine
4c5ca89d8c
Show the appropriate pause message (#12348) 2018-11-06 04:13:48 -06:00
Marcio Teixeira
8517d5f915 LCD menu code refactoring and cleanup (#12308) 2018-11-05 22:51:10 -06:00
Scott Lahteine
b3b4e6dc45
Change Marlin debug flag names to fix conflicts (#12340) 
In reference to #11000
 2018-11-05 22:48:28 -06:00
Giuliano Zaro
f7e682eeee Update Italian language (#12344) 2018-11-05 22:46:59 -06:00
Phr3d13
a813900fce Add Geeetech Rostock 301 config, update GTM32 Pro VB pins (#12345) 2018-11-05 22:42:06 -06:00
Scott Lahteine
04f173790f Remove trailing whitespace 2018-11-05 22:38:20 -06:00
Scott Lahteine
c536ee1122 Clean up bq Zum Mega 3D pins 2018-11-05 22:38:20 -06:00
Scott Lahteine
c31e1735dd Restore LPC1768_PIN_INTERRUPT_M, apply to Z3 
- In reference to #12166
 2018-11-05 06:28:49 -06:00
Scott Lahteine
93d5b945dd Hide mesh editing until a valid mesh exists 2018-11-05 05:13:34 -06:00
Ludy
f34f09c821 Update German language (#12336) 2018-11-05 04:33:31 -06:00
Roman Moravčík
eefd7676a3 Updated slovak translation (#12338) 2018-11-05 04:31:12 -06:00
Scott Lahteine
486f2a66a9 Fix MBL XY parameter error messages 
Fix #11522
 2018-11-05 04:17:37 -06:00
Scott Lahteine
2613ddf61c Fix "circle" 2018-11-05 04:17:37 -06:00
Scott Lahteine
b779b42ffd Prevent current step-down going negative 
Addressing #11348
 2018-11-05 04:17:37 -06:00
Scott Lahteine
427bc64ba1 G28 O respects HOME_AFTER_DEACTIVATE 
Addressing #11271
 2018-11-05 04:17:37 -06:00
Scott Lahteine
3866aeac52 Clean up ENCODER_RATE_MULTIPLIER config 2018-11-05 04:17:37 -06:00
Scott Lahteine
498dfa291e Update and fix CHDK 2018-11-05 04:17:37 -06:00
Scott Lahteine
fed84f2961 Use multiplier edit item for mesh point editing 2018-11-05 04:17:37 -06:00
Scott Lahteine
d5ab4cd22a Provide a default for Z_PROBE_LOW_POINT 2018-11-05 04:17:37 -06:00
Scott Lahteine
3cbc3ecdd7 Fix 'M43 T' to use 'L' as last pin 
- The documentation is correct. The code was wrong.
 2018-11-05 04:17:37 -06:00
Scott Lahteine
1769249876 Recommend keeping endstops off 2018-11-05 04:17:37 -06:00
Scott Lahteine
5182eaf661 Fix endstops enable behavior during probing 
Fix a bug introduced in #9582
 2018-11-05 04:17:37 -06:00
Scott Lahteine
07a0822ebe M420 support in MARLIN_DEV_MODE 2018-11-04 20:54:38 -06:00
Scott Lahteine
63be48ada6 Add MESH_EDIT_MENU to example configs 2018-11-04 19:07:47 -06:00
KangDroid
82ff7c6542 Add a mesh edit menu for MBL / ABL-Bilinear 2018-11-04 19:07:47 -06:00
Scott Lahteine
44fa7fb18c Cleanups for leveling-related code 2018-11-04 19:07:47 -06:00
Scott Lahteine
cc2bc67440 ENABLED(NEWPANEL) => HAS_LCD_MENU 2018-11-04 19:06:10 -06:00
Scott Lahteine
fc84878cba MSG_UBL_EDIT_MESH_MENU => MSG_EDIT_MESH 2018-11-04 19:06:10 -06:00
Scott Lahteine
cd066bfeba Extend error messages for E factors sanity-checks 2018-11-04 18:42:56 -06:00
Ludy
c10edb0998 Update, correct sanity-checks for up to 6 extruders (#12333) 2018-11-04 18:36:45 -06:00
Scott Lahteine
0c85869c26 Clean up file endings 2018-11-04 18:30:10 -06:00
Scott Lahteine
b99f0776d6 Clean up some U8G files 2018-11-04 18:30:10 -06:00
Scott Lahteine
8014e1cc9d Allow disable of LCD_TIMEOUT_TO_STATUS (when 0) 2018-11-04 18:30:10 -06:00
Giuliano Zaro
bd05816fd8 Update Italian language (#12327) 2018-11-04 16:43:02 -06:00
Scott Lahteine
3c21483c88 Provide DOGLCD SPI pins for MKS SBASE + VIKI 2018-11-04 16:20:22 -06:00
Scott Lahteine
e0956bb572 Drop 'register' storage specifier 2018-11-04 16:17:13 -06:00
Scott Lahteine
c04cf127f7 Fix EEPROM servo angles init, section grouping 2018-11-04 16:14:54 -06:00
Scott Lahteine
9c0e05552e Suppress some compile warnings 2018-11-04 15:25:31 -06:00
Karl Andersson
176654791e Use board-specific or platform SPI pins in HAL_STM32 (#12323) 2018-11-04 15:03:45 -06:00
Scott Lahteine
60dbd8161c Fix VMAX editing 
Fix #12326
 2018-11-04 07:06:14 -06:00
Scott Lahteine
b7ca93ba37 Remove dead comment 2018-11-04 06:10:35 -06:00
Scott Lahteine
608be966d7 Add servos to pins_FYSTEC_F6_13.h 2018-11-04 06:10:35 -06:00
Hannes Brandstätter-Müller
67b22760d9 Return to status to show manual deploy/stow messages (#12324) 2018-11-04 04:51:26 -06:00
tharts
f5e8e8b53d Fix broken LPC176x build (#12317) 
* Fix broken LPC176x build
* Add UBL+HD44780 test for LPC1768
 2018-11-04 04:25:03 -06:00
Scott Lahteine
f5eab912ed
Apply #pragma once, misc cleanup (#12322) 
* Apply #pragma once in headers
* Adjust some thermistors formatting
* Misc cleanup and formatting
 2018-11-04 02:25:55 -06:00
Scott Lahteine
8696f882a9
Merge pull request #12313 from thinkyhead/bf2_scara_home_offset 
Revive SCARA home offset (not fully implemented)
 2018-11-03 07:05:24 -05:00
Scott Lahteine
56d2dcb184 Use first_page flag in place of page.page == 0 2018-11-03 06:59:21 -05:00
Scott Lahteine
d1ff22b983 Revive SCARA's home offset (unimplemented) 2018-11-03 06:24:41 -05:00
Scott Lahteine
2c9586be0c Clear up HAS_WORKSPACE_OFFSET meaning 2018-11-03 04:06:37 -05:00
Scott Lahteine
6e3caf23b6 IS_DELTA => ENABLED(DELTA) 2018-11-03 03:57:11 -05:00
Scott Lahteine
19f49db96f Tweak / reduce menu items 2018-11-03 01:18:59 -05:00
Scott Lahteine
e4cf175163
Synchronize on M204, M205 (#12302) 
* Add parser.seen for multiple parameters
* Fix M666, use !seen for report
* Synchronize on M204, M205
 2018-11-03 01:16:37 -05:00
Ludy
5ba6607181 Fix keypad-related compile error (#12306) 2018-11-02 22:29:32 -05:00
Scott Lahteine
2fb2e286ee Followup to #12256 2018-11-02 01:32:24 -05:00
Scott Lahteine
3eb9838dca Simplify TMC sanity-checks 2018-11-02 01:15:49 -05:00
Scott Lahteine
f5b31e218d Followup to #12082 2018-11-02 01:15:27 -05:00
Scott Lahteine
31c28d0dd2
Drop pgm_read_*_near and let headers choose (#12301) 
- Drop `pgm_read_*_near` and let headers choose.
- Define `USE_EXECUTE_COMMANDS_IMMEDIATE` as a conditional.
- Add `process_subcommands_now` for SRAM-based commands.
 2018-11-02 00:42:16 -05:00
Scott Lahteine
fce150f094 inline static => static inline 2018-11-01 23:15:17 -05:00
Giuliano Zaro
323c088356 Restore LED light color after pid tuning (#12082) 2018-11-01 22:04:19 -05:00
Ludy
9f77df2590 Followup to menu refactor. TMC warnings, sanity. (#12288) 
- Followup fixes for menu refactor
- Fix TMC sanity checks, unused var warnings
 2018-11-01 16:13:33 -05:00
Nils Hasenbanck
cafabf2055 Implement DELAY_NS with CYCCNT on Cortex-M7 (#12283) 2018-11-01 16:11:51 -05:00
Scott Lahteine
f5498168ae Ensure PENDING/ELAPSED use a 32-bit integer 2018-11-01 16:08:23 -05:00
MasterPIC
6e041b9c61 Use blink to show more info on LCD (#12256) 2018-11-01 15:56:12 -05:00
Scott Lahteine
eb5600acd2 Add parentheses to LCD_CLICKED 2018-11-01 15:06:14 -05:00
Scott Lahteine
42f8b6c530
Make M125 work with SDSUPPORT (#12289) 2018-11-01 15:03:45 -05:00
Scott Lahteine
f319087372 Followup to #12293 2018-11-01 14:41:03 -05:00
AnHardt
74bbb13008 Fix Mixer calculations for 32-bit processors (#12293) 2018-11-01 14:38:45 -05:00
Scott Lahteine
549d11225a Add to description of Z_STEPPER_AUTO_ALIGN 
In response to #12272
 2018-10-31 18:07:20 -05:00
Scott Lahteine
2cff0d1f39 Move menu_level_bed_corners to its own file 2018-10-31 17:44:42 -05:00
Scott Lahteine
44f2a82a56 Move axis_homed, axis_known_position to motion.* 2018-10-31 17:44:42 -05:00
Scott Lahteine
946cf8b453 EEPROM read code grouping 2018-10-31 16:43:46 -05:00
Ludy
f2adb4b9cc Update German language (#12280) 2018-10-31 16:40:41 -05:00
Karl Andersson
484ca68228 Fix misplaced parentheses (#12284) 2018-10-31 15:34:37 -05:00
Scott Lahteine
1d366db764 Tweaks to CR-10S configuration 2018-10-30 23:36:32 -05:00
Scott Lahteine
b5d7f69b51 Followup to #12249 2018-10-30 22:51:45 -05:00
N95JPL
b780b69c62 Use font ascent and descent for line positioning (#12224) 2018-10-30 22:39:44 -05:00
Scott Lahteine
9cd3529108 Organize language data, fix Korean and Danish 2018-10-30 20:41:16 -05:00
Chris Pepper
66d44c72c3 Add fast binary file transfer to SD card option (#12249) 2018-10-30 19:44:12 -05:00
Marcio Teixeira
72d8adfd1e Cleanup and refactor EXTENSIBLE_UI (#12227) 
- Add `axis_t`, `extruder_t`, `heater_t`, and `fan_t` to eliminate ambiguity, improve type safety.
- Regularized getter/setter argument order and naming.
- `setAxisPosition` no longer stacks moves in the buffer, allowing it to be called repeatedly on each touch ui tap.
- Implement better manual moves for `EXTENSIBLE_UI` (#12205)
- Calling `setAxisPosition_mm` no longer buffers the entire move to the new position, but instead causes small moves towards it to be made during the idle loop. This allows the user to adjust the destination even after the move has started and makes the UI feel much more responsive.
- As suggested by @ejtagle, the new code keeps the planner buffer full to ensure smooth motion without stops and starts.
- Change `En`, `Hn` and `FANn` to zero-based indices.
- Labels consistent with the rest of Marlin code.
 2018-10-30 19:42:26 -05:00
Karl Andersson
1946f729fd STM32 FastIO using register access (#12276) 2018-10-30 19:25:44 -05:00
Scott Lahteine
56057bcecd Fix lcd_impl_status_screen_1 2018-10-30 19:24:16 -05:00
Scott Lahteine
4ed579cafc Americanized English spelling 2018-10-30 18:55:38 -05:00
Scott Lahteine
9e663a624b Apply #pragma once to configuration files 2018-10-30 18:35:12 -05:00
Scott Lahteine
98c32d8df1 Fix a config endif label 2018-10-30 18:28:16 -05:00
Scott Lahteine
3583e2b449
Followup to Menu Refactor (#12275) 2018-10-30 16:34:45 -05:00
TheLongAndOnly
5536228359 G34 Auto-align multi-stepper Z axis (#11302) 2018-10-29 14:01:36 -05:00
Scott Lahteine
f9b80e7217 Make getfilename_sorted standard for listings 2018-10-29 13:54:21 -05:00
Scott Lahteine
5ead026967 Fix menu_temp_xx_filament_change menu items 2018-10-28 20:43:33 -05:00
Scott Lahteine
d632e44c8c
[Merge] Refactor LCD menus / screens (#12199) 2018-10-28 18:18:22 -05:00
Ludy
1f9806875c Update German language (#12261) 2018-10-28 18:11:55 -05:00
mholeys
63ce8baa55 Fix Teensy 3.5/3.6 ADC access for ADC1 (#12258) 2018-10-28 15:51:49 -05:00
Scott Lahteine
3a935fd72b Reduce repetition in menu edit items 2018-10-28 15:46:45 -05:00
Scott Lahteine
b063b1b722 Reorganize includes and declarations 2018-10-28 15:46:45 -05:00
Scott Lahteine
43cf913048 Move SD Card Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
0161d3f733 Move Custom User Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
3b0d2330b6 Move Delta Calibrate Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
6896847210 Move LED Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
9cd5471202 Move Job Recovery Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
9f11e0284c Move Filament Change Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
d87ab3ed20 Move Advanced Settings Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
587a64d80c Move Bed Leveling Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
96f313fb41 Move Info Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
423ab029b2 Move Temperature Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
489017995e Move UBL Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
a489c9fa52 Move Motion Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
3a9ad9f2b1 Move Configuration Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
143d4ec043 Move Tune Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
829effc1fe Move Main Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
37ff663b02 Convert LIGHTWEIGHT_UI to CPP 2018-10-28 15:46:45 -05:00
Scott Lahteine
a964f098b3 Make dogm status screen a CPP 2018-10-28 15:46:45 -05:00
Scott Lahteine
8055ed24ff Move font data to a subfolder 2018-10-28 15:46:45 -05:00
Scott Lahteine
774a6e8199 Drop TALL_FONT_CORRECTION 2018-10-28 15:46:45 -05:00
Scott Lahteine
c825c419d4 Convert DOGM / HD44780 impl to CPP files 2018-10-28 15:46:45 -05:00
Scott Lahteine
182b1405d9 LCD conditionals in configurations 2018-10-28 15:46:45 -05:00
Scott Lahteine
2bf18950ab Refactor LCD menus 2018-10-28 15:46:45 -05:00
Scott Lahteine
ac5f2762b7 Use E_AXIS_N where possible 2018-10-28 15:46:45 -05:00
MasterPIC
6fbc87301f 'G29 H' to set a centered square probe area (linear, bilinear) (#12242) 2018-10-27 20:30:21 -05:00
Karl Andersson
c1e8bd6add Remove STM32 board-specific delays (#12243) 
...and replace with delays for all HAL_STM32 boards.
 2018-10-27 17:26:12 -05:00
Scott Lahteine
3c9daf322a MSG_CNG_SDCARD => MSG_CHANGE_SDCARD 2018-10-27 13:56:29 -05:00
Scott Lahteine
4b7a0a5b39 Require TMCStepper 0.2.2 or newer 
In reference to #12175
 2018-10-27 11:15:28 -05:00
Scott Lahteine
ab8425f1b5
Clean up PROBE_TRIGGERED_WHEN_STOWED_TEST (#12232) 2018-10-26 19:18:20 -05:00
Chris Rigter
3028a620af Add RACK_AND_PINION_PROBE (#12218) 2018-10-26 18:24:24 -05:00
InsanityAutomation
ad60f0691c Add Creality3D RAMPS pins definitions (#12229) 2018-10-26 16:09:04 -05:00
Scott Lahteine
5580773191
Use FastIO, sanity-check LPC SD options, apply formatting (#12231) 2018-10-26 15:23:02 -05:00
Scott Lahteine
d015f746cc
Fix some compile warnings (#12220) 2018-10-26 03:53:06 -05:00
Scott Lahteine
dacb5324e8 Fix display of Y on Graphical LCD 2018-10-26 01:43:47 -05:00
Scott Lahteine
bf9dd4f4cf
Add helpers for custom text in menu items (#12214) 
For some features it can be useful to write custom text in a menu item. This commit provides helpers to make this easier.
 2018-10-25 15:17:53 -05:00
Scott Lahteine
e8031b1152 Add Custom Microstepping options 2018-10-25 11:26:32 -05:00
Scott Lahteine
fbfb48cce0 Indent a block 2018-10-25 10:52:27 -05:00
Marcio Teixeira
1a00d1bdaf Add pullup to USB interrupt line 
- A pullup on the INT pin is required when the pin is level-active
 2018-10-25 10:42:08 -05:00
TheSFReader
a07ac6312f G0 feedrate may be fixed or variable (#12172) 2018-10-25 10:35:16 -05:00
Scott Lahteine
53c535a0c1 Remove trailing whitespace 2018-10-25 09:46:33 -05:00
Roman Moravčík
55dec02ca1 Allow X, Y, Z manual move when cold. (#12209) 2018-10-25 09:13:52 -05:00
Luc Van Daele
7243101135 z_offset fix for deltas (#12210) 2018-10-25 09:11:26 -05:00
Scott Lahteine
9613f00877 Fix getProgress_seconds_elapsed to return seconds 2018-10-24 18:05:15 -05:00
gjdodd
5d487ef40e Fix null exception due to duration_t of zero (#12207) 2018-10-24 17:59:33 -05:00
Giuliano Zaro
a9061714f2 Update Italian language (#12196) 2018-10-24 16:40:48 -05:00
InsanityAutomation
aebbb2359d Fix IDEX homing X0 wrong direction (#12200) 2018-10-24 16:40:06 -05:00
gjdodd
0a549fd1f2 Fix EXTENSIBLE_UI compile errors (#12206) 2018-10-24 16:36:11 -05:00
Roman Moravčík
a80ba8fc6e Slovak translation update (#12202) 2018-10-24 16:02:38 -05:00
Roman Moravčík
e48cbff10d Fixed redefinition warnings of MSG_HOTEND_TOO_COLD. (#12203) 2018-10-24 15:00:07 -05:00
Scott Lahteine
7a04eb3a8b Fix some comment formatting 2018-10-23 22:35:44 -05:00
Scott Lahteine
2f873a119f Revert some UBL strings 2018-10-23 15:39:59 -05:00
Ludy
a93e9e6e9b Use preheat labels in place of PLA/ABS (#12194) 2018-10-23 15:38:17 -05:00
Karl Andersson
aa72884a6e Enable use of SERIAL_PORT_2 on HAL_STM32 (#12197) 2018-10-23 15:24:58 -05:00
Scott Lahteine
46360f18b4 Bring thermistor_75.h up to speed 2018-10-23 14:52:16 -05:00
Scott Lahteine
e229b831fa Customizable preheat labels 2018-10-23 00:57:50 -05:00
Scott Lahteine
a553ab82e0 Add e index to _lcd_move_distance_menu 2018-10-22 23:35:04 -05:00
Scott Lahteine
3a46212dd8
Better cold extrusion prevention in LCD menu (#12189) 2018-10-22 20:54:38 -05:00
Marcio Teixeira
fc31da1114 Implement custom delay/millis for EXTENSIBLE_UI (#12188) 2018-10-22 19:37:48 -05:00
forkoz
3a3ab3391f Return set_directions() to stepper.cpp (#12182) 
Initial manual Z move can be negative if your stepper is inverted. Leads to bad situations for crashed or initially booted printers.
 2018-10-22 19:30:51 -05:00
Scott Lahteine
e5ae7a07d1 Suppress compiler warning 2018-10-21 13:44:27 -05:00
Hannes Brandstätter-Müller
6ee2af5e2d Simplify pins_TRIGORILLA_14.h (#12162) 2018-10-21 03:23:20 -05:00
Roman Moravčík
d801f85963 Correct EEPROM read/write disparities. (#12169) 2018-10-21 02:56:31 -05:00
Scott Lahteine
8d3a92fc4a Followup to millis_t patch 2018-10-20 23:23:58 -05:00
Ludy
44369d536a Use millis_t where needed (#12152) 2018-10-20 23:21:27 -05:00
Scott Lahteine
b641571098 Replace types.h with millis_t.h 2018-10-20 23:07:12 -05:00
Scott Lahteine
eeef4e630a Fix compile error in leds.h 2018-10-20 23:07:12 -05:00
Scott Lahteine
9969c06cb5 Fix compiler warning 2018-10-20 17:16:59 -05:00
Farkas Péter
427c80119a Hide some menu items when busy: fix typo (#12164) 2018-10-20 15:55:31 -05:00
InsanityAutomation
55ac2f4c23 Fix filament runout for idex duplication modes (#12168) 2018-10-20 13:39:33 -05:00
Karl Andersson
b640b3b0d6 Define ST7920 delays for board ARMED (#12161) 2018-10-20 13:12:54 -05:00
Marcio Teixeira
2e5e689a7f Fix kill() and ExtensibleUI (#12160) 
* Fix to isPrintingFromMedia()

  - isPrintingFromMedia() will now return true even if SD print is paused.
  - isPrintingFromMediaPaused() allows UI to determine if the print is paused.

* Don't use _delay_us in minkill (#12145)

  - In HAL_DUE, _delay_us is simply an alias for delay, which causes the board to hang and subsequently reboot due to the watchdog timer.

* Shorten code with IFSD macro
 2018-10-20 01:44:46 -05:00
Scott Lahteine
b381cad399 Clean up trailing whitespace 2018-10-19 15:27:17 -05:00
Scott Lahteine
9090065e9f Move EXTRA_FAN_SPEED above FWRETRACT 2018-10-19 15:15:00 -05:00
Karl Andersson
4eb798dbdc Add support for Arm'ed (STM32F4) board (#12147) 2018-10-19 14:50:52 -05:00
TheSFReader
1fb9b299d4 Add M524 to abort SD printing (#12155) 2018-10-19 14:25:07 -05:00
Scott Lahteine
d26d9d5b81 Tweak IS_SD_INSERTED 2018-10-19 14:00:36 -05:00
Scott Lahteine
c6a5c74208 Add parentheses to SD macros 2018-10-19 13:52:57 -05:00
Giuliano Zaro
aa9202260d Fix endstop when no interrupt (#12158) 2018-10-19 13:45:39 -05:00
Scott Lahteine
8c02dd971b Move disable_all_steppers to minkill 2018-10-19 13:42:04 -05:00
Scott Lahteine
3847c08f7e Disable heaters/steppers before message 2018-10-19 13:30:46 -05:00
Marcio Teixeira
71e19baf69 Fix kill => disable_all_heaters => print_job_timer.stop (#12146) 
- Remove `print_job_timer.stop()` from `disable_all_heaters`
- Call `print_job_timer.stop()` for relevant `disable_all_heaters()`.
- Split up `kill()` for watchdog interrupt safety
 2018-10-18 21:20:56 -05:00
Ludy
4cc1c2627e Update German language (#12143) 2018-10-18 19:17:37 -05:00
Ludy
75a0d46edf Fix compile warning re: LCD_INFO_SCREEN_STYLE 2018-10-18 19:16:24 -05:00
Scott Lahteine
a81763c237 Pins E sanity check tweak 2018-10-18 18:48:23 -05:00
Giuliano Zaro
bc22641002 [2.0.x] Updated Italian Language (#12148) 2018-10-18 18:08:39 -05:00
Michael Triffon
eded90bf87 Updated Azteeg X5 Mini Wifi pins for onboard SD (#12133) 2018-10-18 11:52:55 -05:00
nhchiu
27a84fd021 Remove unused option in Anycubic Kossel config (#12138) 2018-10-18 11:47:59 -05:00
Scott Lahteine
67a3c5a16a
Alternative info screen (Prusa-style) (#12132) 
* Fix Z value display
* Add HAS_PRINT_PROGRESS
* Alternative Info Screen option
* Add LCD_INFO_SCREEN_STYLE to example configs
 2018-10-18 11:34:52 -05:00
Marcio Teixeira
5b7dd553d3 Fix sd_mmc_spi_mem capacity; clean up USB code (#12134) 
- Fix an error in the return value of `sd_mmc_spi_read_capacity` which was causing the host OS to read beyond the last sector in the card.
- Clean up the USB flashdrive code and add better debugging.
 2018-10-18 11:34:07 -05:00
Scott Lahteine
df768e7d8f Followup to #12129 2018-10-18 11:29:49 -05:00
Chris Pepper
3c13c9e3e9 [LPC176x] Fix USEABLE_HARDWARE_PWM macro, cleanup multiple LED support (#12129) 2018-10-18 11:26:50 -05:00
InsanityAutomation
a768df83cb Remove stale variable (#12136) 2018-10-18 11:26:14 -05:00
Hannes Brandstätter-Müller
c36773bffb Update the Ender-4 example config (#12131) 
- Enable filament change menu
- Enable bed-PID
- Enable s-curve acceleration
- Enable some menu items
- Update from Skorpi's new version
- Fix extruder steps, deactivate nozzle clean feature
 2018-10-17 15:49:52 -05:00
Ludy
9c71bff5e8 Update German language (#12115) 2018-10-17 11:17:06 -05:00
Nils Hasenbanck
9deb23aa47 Add missing SerialUSB definition for STM32 HAL (#12124) 2018-10-17 11:14:10 -05:00
Nils Hasenbanck
0519ef0802 Update pins for final RemRam v1.3 board (#12125) 2018-10-17 11:13:38 -05:00
InsanityAutomation
3ec3872730 Single Z raise value for all tool-changing / parking (#12090) 
* Universal tool-change Z lift
* Add TOOLCHANGE_ZRAISE to example configs
* Park/unpark changes to example configs
* Implement DEBUG_DXC_MODE
 2018-10-17 11:11:41 -05:00
Scott Lahteine
6bdbe3299e Fix a comment 2018-10-17 10:33:54 -05:00
Scott Lahteine
bc75eb2c64 Cleanup for HAL_spi_Due.cpp 2018-10-17 10:33:54 -05:00
AnHardt
d82bcdeea1 Make PULSE_STOP(E) conditional (#12121) 2018-10-17 09:52:57 -05:00
Chris Pepper
c90e26dfa6 fix normal extruder stepping (#12118) 2018-10-17 02:47:31 -05:00
Hannes Brandstätter-Müller
96bbda5d48 remove confusing comment (#12120) 2018-10-17 02:47:03 -05:00
Marcio Teixeira
f98f4ac7ea Fix and improve EXTENSIBLE_UI (#12117) 
- Add methods to access print counter data
- Clean up some inconsistent method names
- Clear lcd status after filament change
- Implement `lcd_reset_status` so it works like UltraLCD
 2018-10-16 16:58:29 -05:00
Scott Lahteine
8bf596bd4c RETRACT_ZLIFT => RETRACT_ZRAISE 2018-10-16 16:46:40 -05:00
Marcio Teixeira
056561df93 [2.0.x] Enhancements to FILAMENT_RUNOUT_SENSOR (#12069) 
- Added FILAMENT_RUNOUT_DISTANCE_MM option
- Added FILAMENT_MOTION_SENSOR option
 2018-10-16 07:28:52 -05:00
Scott Lahteine
cce4931342 Clean up recent contribs 2018-10-16 06:45:44 -05:00
Karl Andersson
8b5e51c9aa STM32F4xx modifications for HAL_STM32 (#12080) 2018-10-16 06:42:41 -05:00
Scott Lahteine
bf0c809ff2 Update M165 comment 2018-10-16 06:10:27 -05:00
AnHardt
9ac9649183 Mixer - update descriptions (#12108) 2018-10-16 06:09:02 -05:00
Scott Lahteine
9bf5d4331c Clear up some compiler warnings 2018-10-16 05:47:02 -05:00
Scott Lahteine
0139762a96 Fix a sanity check 2018-10-16 05:46:33 -05:00
Scott Lahteine
2ecb124e42 Fix trailing whitespace 2018-10-16 03:50:16 -05:00
AnHardt
f56968ba0b New Continuous Filament Mixer (#12098) 2018-10-16 03:38:57 -05:00
Ludy
2d2cd628c6 Update German language (#12094) 2018-10-16 02:59:04 -05:00
Scott Lahteine
84b59d58fb Clean up whitespace 2018-10-16 02:02:20 -05:00
swilkens
06e2afe8e0 [2.0.x] Reduce HOMING_FEEDRATE_XY for Ender 3 (#12105) 
Homing on the Ender 3 with HOMING_FEEDRATE_XY set to 50*60 was shown (#12074) to cause the end-stop micro-switches to bottom out, causing the carriage for both X and Y axis to physically crash into the micro switch. Reducing the homing speed prevents the switches from bottoming out.
 2018-10-16 01:51:47 -05:00
TheSFReader
af939c158a Option for G0 to have a separate feedrate (#12089) 2018-10-16 01:49:51 -05:00
Christopher Pepper
e5b4bf22d4 Remove debug output from flash persistent store implementation 2018-10-14 18:43:48 +01:00
Christopher Pepper
42fb7c14b0 Update the sdcard usb sharing config and apply to Re-ARM 2018-10-14 18:43:48 +01:00
Christopher Pepper
254b68fe2c servo update 2018-10-14 18:43:48 +01:00
Andy Shaw
870bfd08f5 usb and sdcard sharing improvements 
* Add traceback after watchdog timeout

Add the cpability to perform a traceback following a watchdog timeout.

* Enhanced hardware SPI

Allow use of either SSP0 or SSP1.
Ensure that no data is left in I/O buffers after calls to enable sharing of SSP hardware.

* Make flash emulation of eeprom the default

Make use of flash for eeprom storage the default. This means that usage of eeprom will not cause USB drive mount/unmount operations.

* Allow sharing of SD card

SD card I/O operations from the USB stack take place in idle loop, rather than at interrupt time. Allowing sharing of the SPI bus.

New configuration options to allow usage of the SD card to be specified.

* Fix problem with hardware SPI pins
 2018-10-14 18:43:48 +01:00
Christopher Pepper
5ddf52d58e [HAL][LPC176x] Pull out framework into separate repository 
Framework and build platform now located at https://github.com/p3p/pio-framework-arduino-lpc176x and https://github.com/p3p/pio-nxplpc-arduino-lpc176x respectively

fix mkssbase leds

move hardware serial

remove hardware/software serial

Hardware Serial extraction

HardwareSerial ISRs

fix disabled serial2 causing Serial object to link

move usb devices out to framework

separate out adc/pwm peripheral function from hal.cpp

fix includes

remove unused pwm init

move adc

HAL header update

templated filtered adc

LPC1769 platform
 2018-10-14 18:43:48 +01:00
Roman Moravčík
213e94bce2 [2.0.x] Updated slovak translation (#12059) 2018-10-14 02:15:15 -05:00
Karl Andersson
a40458405a Fix datasize error when FWRETRACT is disabled (#12086) 2018-10-14 02:14:34 -05:00
Scott Lahteine
951b25163e
Extend M217 with configurable park/raise (#12076) 2018-10-13 23:08:20 -05:00
Kevin Velickovic
ea13a77dcb Fixed Z-Probes NO/NC for Anycubic Kossel (#12083) 2018-10-13 20:34:56 -05:00
N95JPL
ab9d5eb38d Add Bootscreen Animation (#12077) 2018-10-12 22:11:20 -05:00
Scott Lahteine
26208a5c2f Clean up some boot screens 2018-10-12 18:56:39 -05:00
Scott Lahteine
9b6be0ae0f Fix lite status screen SD % 2018-10-12 17:02:59 -05:00
Scott Lahteine
af3bf6c956 Tweak config spacing 2018-10-12 16:09:27 -05:00
Scott Lahteine
a44ef27897 Outdent singlenozzle toolchange code 2018-10-12 15:19:03 -05:00
Scott Lahteine
d338e4d875 Fix singlenozzle toolchange cold extrusion test 2018-10-12 15:15:25 -05:00
Roxy-3D
25b980dddb
Remove erroneous Pin 12 definition 
There is no switchable Power Supply.   Don't put it on Pin 12.   
(Pin 12 is actually FAN1)
 2018-10-12 13:45:04 -05:00
Scott Lahteine
ddaef1a60c Clean trailing whitespace 2018-10-11 21:40:55 -05:00
Scott Lahteine
1407afad73 Move SENSITIVE_PINS to its own file 2018-10-11 01:10:11 -05:00
Scott Lahteine
45e738876a Add stepper MS3 support 
Co-Authored-By: TheLongAndOnly <thelongandonly@users.noreply.github.com>
 2018-10-11 01:10:11 -05:00
Giuliano Zaro
d43d4e4219 Refactor PRINTER_EVENT_LEDS, apply to M303 (#12038) 
Co-Authored-By: Giuliano Zaro <gmagician@users.noreply.github.com>
 2018-10-10 21:25:43 -05:00
Giuliano Zaro
d8d76cd2ba [2.0.x] Italian language update (#12060) 2018-10-10 20:13:10 -05:00
Scott Lahteine
e8d2cf4fb5 EEPROM followup (tmc_stepper_current_t) 2018-10-10 17:25:45 -05:00
Scott Lahteine
50cbca4c55 Hide some menu items when busy 2018-10-10 17:18:33 -05:00
InsanityAutomation
3cb5517ddb Make singlenozzle tool-change honor no_move (#12056) 
...Set no move earlier so it applies
 2018-10-10 16:49:59 -05:00
InsanityAutomation
d332fcb8fa Fix firmware-retract compile errors (#12061) 2018-10-10 16:46:08 -05:00
Scott Lahteine
43940d59ed Fix trailing spaces 2018-10-10 16:24:35 -05:00
InsanityAutomation
b2c1cd7eda Allow cold change of active extruder (#12055) 
Followup to #11994
 2018-10-10 09:57:48 -05:00
Scott Lahteine
d556dc1865
Fix and improve EEPROM storage (#12054) 
* Clean up Temperature PID
* Improve EEPROM read/write/validate
* Group `SINGLENOZZLE` saved settings
* Group planner saved settings
* Group filament change saved settings
* Group skew saved settings
* Group `FWRETRACT` saved settings
 2018-10-10 09:45:20 -05:00
Scott Lahteine
9b5c1a5e77 Fix EEPROM checksum bug 
Addressing #12048
 2018-10-10 06:14:58 -05:00
Scott Lahteine
272d4a5167 Apply #pragma once 2018-10-10 02:57:01 -05:00
Scott Lahteine
07d33849b0 Fix unused var warning, apply ENABLED 2018-10-09 21:31:28 -05:00
Hannes Brandstätter-Müller
a3e8cb1e44 [2.0.x] Ender-4 small improvements in Configuration (#11843) 2018-10-09 20:58:22 -05:00
Scott Lahteine
cf5284cdf2
Add SD Firmware Update capability (#12043) 
Co-Authored-By: timoxd7 <timoxd7@users.noreply.github.com>
 2018-10-09 20:00:47 -05:00
Scott Lahteine
0bd54392b7 Use uint8_t in EEPROM code 2018-10-09 19:00:01 -05:00
Scott Lahteine
ce82015d5f Fix include in G80 2018-10-09 17:24:56 -05:00
Marcio Teixeira
cef1de89d0 Fixed incorrect axis index. (#12051) 2018-10-09 16:59:34 -05:00
Marcio Teixeira
d6d48e63fb Allow #defined TYPE arg to ultralcd menu macros (#12041) 
Previously, it was not possible for the TYPE argument to ultralcd menu macros to itself be a #defined value. This made it difficult to create variables to set many related menu items to a common precision that could be easily changed.
 2018-10-08 20:01:00 -05:00
Emilio Moretti
2ef7175b42 Update Ender-2 BED_MAXTEMP (#12042) 
Also added details to the README to make sure the Ender-2 status is properly documented.
 2018-10-08 19:57:44 -05:00
Scott Lahteine
5f6aabccbe Tweak M48 spacing 2018-10-08 19:11:25 -05:00
Marcio Teixeira
ec9aa4f468 [2.0.x] Miscellaneous fixes (#12039) 
* Allow override of soft SPI pins in `pins_*.h`
* Add default case to avoid compiler warning.
* Additional pin definitions for Archim 2.
* Einsy Retro has same timings as Einsy Rambo.
 2018-10-08 18:14:52 -05:00
Marcio Teixeira
906a24fa81 Extensible user interface API (#11193) 2018-10-08 15:44:05 -05:00
InsanityAutomation
ee253991d4 Various fixups for single-nozzle filament swap (#12036) 2018-10-08 15:39:55 -05:00
Marcio Teixeira
8dbb305e8e Fix "Missing separator" errors. (#12035) 
- Makefiles require tabs (not spaces) before shell commands.
- Other indentation can either be space or tabs.
 2018-10-08 14:28:52 -05:00
Scott Lahteine
55e810d512 Fix G80 compilation 2018-10-08 13:11:36 -05:00
Scott Lahteine
d5017e2788 Add status screen with 4 nozzles 2018-10-08 01:27:21 -05:00
Scott Lahteine
7db0113b53 Improve E_AXIS_N macro 2018-10-07 18:22:05 -05:00
Nils Hasenbanck
191df5e17d Correct PWM_PIN behavior for STM32 HALs (#12027) 2018-10-07 17:08:01 -05:00
Sam Lane
f2ecf8d510 Add option to control Solenoids under PARKING_EXTRUDER (#12028) 2018-10-07 17:07:12 -05:00
InsanityAutomation
74cd6cb4fc Single nozzle filament change (#11994) 2018-10-07 17:06:14 -05:00
Scott Lahteine
bfcf570d68 Try ISR_ALIASOF for Endstop Interrupts 2018-10-07 17:05:32 -05:00
Giuliano Zaro
c0d9058e25 Shorten an Italian menu title (#12034) 
…and change a multi-use "back" menu item.
 2018-10-07 16:43:48 -05:00
teemuatlut
dffb4c63dc [2.0.x] TMC2660 followup (#12029) 
* Don't react to s2g on TMC2660. False positives
* Init with sensorless probing as well
 2018-10-07 15:37:44 -05:00
Scott Lahteine
d6b0fbd771
Use uint8_t for all fan speeds (#12032) 2018-10-07 15:34:41 -05:00
Scott Lahteine
cb7844c8d4
Save PROGMEM on serial prefixes (#12033) 
With default config and `EEPROM_SETTINGS`, saves over 200 bytes of PROGMEM.
 2018-10-07 15:32:15 -05:00
Scott Lahteine
07db08e39d Fix EXTRUDER_AUTO_FAN_SPEED comment 2018-10-06 19:51:17 -05:00
Scott Lahteine
ca0e308105 Fix up some units comments 2018-10-06 19:45:50 -05:00
Scott Lahteine
65b8f3821b Suppress temperature.h compile warning 2018-10-06 19:29:41 -05:00
teemuatlut
c447d75916 Add support for TMC2660 (#11998) 2018-10-06 17:18:10 -05:00
Scott Lahteine
cf0b9eb37c no need to use destination in do_pause_e_move 2018-10-06 16:43:21 -05:00
Scott Lahteine
e8d677620c Use NUM_SERVOS in EEPROM code 
Fix #12015
 2018-10-06 15:11:32 -05:00
Scott Lahteine
0fcdfdeed6 Followup to #12017 2018-10-06 13:23:58 -05:00
Phr3d13
acac2adfc8 Add support for MeCreator2 (#12017) 2018-10-06 12:26:49 -05:00
Thomas Moore
49823a4939 Fix broken jerk handling (#12019) 
Fix #12004
 2018-10-06 12:02:50 -05:00
Scott Lahteine
52a37913c1 Extend and apply some corrections 2018-10-06 00:27:21 -05:00
Scott Lahteine
77b9a41f1f Add G-code extensions to example configs 2018-10-06 00:15:35 -05:00
thesfreader
e09c144674 Add CNC-like G-code options 2018-10-06 00:15:27 -05:00
Scott Lahteine
33056046a3
STM32 non-generic PWM_PIN and USEABLE_HARDWARE_PWM (#12016) 2018-10-06 00:14:12 -05:00
Scott Lahteine
d5141c4e03 Fix up leading/trailing whitespace 2018-10-05 18:19:59 -05:00
Marcio Teixeira
03fc4d31d0 Makefile support for 32-bit Archim board and new TMC library (#11997) 
* Support new TMC library and 32-bit Archim board

- Added IS_MCU flag
  - When IS_MCU flag is 1, AVR compiler will be used
  - When IS_MCU flag is 0, ARM compiler will be used
- Added support for new TMC library
- Added support for a 32-bit Archim board, which could probably be used as a basis for other 32-bit boards.
 2018-10-05 16:06:11 -05:00
Scott Lahteine
65b36642f8 Fix Anycubic Kossel config 2018-10-04 20:27:05 -05:00
Scott Lahteine
fc326b3dde Add USB_FLASH_DRIVE_SUPPORT to examples 
Co-Authored-By: marcio-ao <marcio@alephobjects.com>
 2018-10-04 19:54:12 -05:00
Marcio Teixeira
2067619a26 Add USB_FLASH_DRIVE_SUPPORT 2018-10-04 19:54:12 -05:00
Giuliano Zaro
07fe8d28be [2.0.x] Partial Italian revert (#12008) 
- Use a comma for decimals just in one message has not been a good idea.
- Full comments translation
 2018-10-04 14:38:54 -05:00
Scott Lahteine
517b4f4cd4 Fix lightweight UI hotends display 2018-10-04 14:37:24 -05:00
Giuliano Zaro
72a750e0eb [2.0.x] Update Italian language (#11996) 2018-10-04 03:03:47 -05:00
Scott Lahteine
bb561baf9e Tweak some config comments 2018-10-04 02:42:12 -05:00
Nils Hasenbanck
fcf6d127fd STM32 timer simplification (#11995) 
Prescalers aren't calculated for the given target frequency.
Stepper timer should run at 2 Mhz and temperature timer at 72 Khz.
 2018-10-03 22:33:24 -05:00
Scott Lahteine
8daadd2c8c
Fix TMC_DEBUG undefined report_tmc_status (#11993) 2018-10-03 11:56:49 -05:00
Scott Lahteine
c40ea1f0fd Update EEPROM_VERSION 
And set EEPROM_OFFSET to 0, since the historical 100 skipped bytes are never used.
 2018-10-03 11:34:34 -05:00
Scott Lahteine
1358bd9319 Make MAX_EXTRUDERS always 6 2018-10-03 11:32:19 -05:00
AnoNymous
001f26b642 Template struct simplification for serial (#11990) 2018-10-03 11:01:21 -05:00
Scott Lahteine
348004c34f
STM32F7 HAL using the official STM32 Arduino Core (#11750) 2018-10-03 03:26:07 -05:00
Scott Lahteine
3e58b3a5d4 Followup to #11943 2018-10-03 02:55:10 -05:00
teemuatlut
c3229e1b34 Migrate to a new TMC library (#11943) 2018-10-03 02:48:49 -05:00
brian park
2abf3d258d Korean language translation support (#11987) 2018-10-03 01:53:34 -05:00
Eduardo José Tagle
d6955f25b2 Expand serial support in DUE/AVR hals exploiting the templated MarlinSerial classes (#11988) 2018-10-03 00:47:27 -05:00
Eduardo José Tagle
f6f2246f59 Templatized serial classes (#11982) 2018-10-02 22:15:30 -05:00
Scott Lahteine
ee53f7d813 Revert header reorg. 2018-10-02 22:09:41 -05:00
Scott Lahteine
d619ba2685 Tweak STM32F4 config 2018-10-02 22:03:00 -05:00
LineF
d777cef837 fixed minimum macro (#11986) 2018-10-02 21:35:34 -05:00
Scott Lahteine
e3f7b69105
Add PROBING_STEPPERS_OFF (#11984) 
Co-Authored-By: houseofbugs <houseofbugs@gmail.com>
 2018-10-02 05:13:58 -05:00
Scott Lahteine
0e5bcdf695 Make DISABLE_INACTIVE_EXTRUDER a simple switch 2018-10-02 04:57:03 -05:00
Scott Lahteine
0dedb3e139
Reorganize some core headers (#11983) 2018-10-02 04:25:46 -05:00
Thomas Moore
ab4549d2bc [2.0.x] Add simultaneous retraction for mixing extruder (#11941) 2018-10-01 23:32:02 -05:00
Scott Lahteine
c75f5a376b Tweak some comments 2018-10-01 18:34:14 -05:00
Scott Lahteine
f4c625d3a1 Ensure MIN/MAX overrides 2018-10-01 05:32:55 -05:00
Scott Lahteine
3019713402 Reorganize some enums 2018-10-01 05:32:55 -05:00
Scott Lahteine
606a4362b3 Reduce STM32F4 compile warnings 2018-10-01 04:41:17 -05:00
Scott Lahteine
b3154b2120 Apply MOVE_Z_WHEN_IDLE to example configurations 
Co-Authored-By: dot-bob <gibben@gmail.com>
 2018-10-01 01:41:11 -05:00
dot-bob
b0fd8f2d74 Add option to move Z on double-click when idle 2018-10-01 01:41:11 -05:00
Scott Lahteine
389376c40e Clean up softspi.h 2018-10-01 01:29:48 -05:00
Scott Lahteine
e78bdd654d Clean up BABYSTEP options 2018-10-01 01:29:21 -05:00
InsanityAutomation
8ae113ff36 Show zprobe_zoffset when BABYSTEP_HOTEND_Z_OFFSET is disabled (#11973) 2018-10-01 00:30:10 -05:00
InsanityAutomation
2e98437392 Clean up main menu (#11972) 2018-10-01 00:15:06 -05:00
InsanityAutomation
6d862b2916 Home before level corners, if needed (#11976) 
…and add a consistent homing screen for all LCD pre-homing.
 2018-10-01 00:14:28 -05:00
Scott Lahteine
11ac75edcb
Use PGM_P for PSTR pointers (#11977) 2018-09-30 23:44:33 -05:00
InsanityAutomation
4d5566a6b7 Add filament runout sensor menu item (#11971) 2018-09-30 21:33:46 -05:00
Scott Lahteine
8489673cea Adjust some HAL formatting 2018-09-30 21:24:37 -05:00
Scott Lahteine
fb8a07660a Followup to minmax patch 
Co-Authored-By: Palatis <palatis@gmail.com>
 2018-09-30 21:17:31 -05:00
Scott Lahteine
3c40933713 Remove trailing spaces, old comment 2018-09-30 20:47:06 -05:00
Hannes Brandstätter-Müller
a3ec805c97 Anycubic Kossel Linear+: corrected DELTA_DIAGONAL_ROD (#11964) 2018-09-30 05:41:26 -05:00
AnoNymous
b30ca652ae Replace MIN# / MAX# with variadic MIN / MAX (#11960) 2018-09-30 04:59:14 -05:00
Scott Lahteine
e10f730478 Tweak vector_3::apply_rotation 2018-09-30 01:51:33 -05:00
Scott Lahteine
e2ab78d876 Fix SERIAL_PORT_2 sanity check 2018-09-30 00:24:10 -05:00
AnoNymous
a644d8cb93 Avoid copies in vector and matrix (#11959) 2018-09-29 23:04:40 -05:00
Scott Lahteine
693865a649 Fix some whitespace 2018-09-29 22:36:36 -05:00
Scott Lahteine
9903305dda
Merge pull request #9582 from tcm0116/2.0.x-sensorless_probing 
[2.0.x] Add TMC2130 sensorless probing
 2018-09-29 21:02:22 -05:00
Scott Lahteine
14df753086 Correction for block->mix_steps 
Fix #11484
 2018-09-29 19:13:17 -05:00
Alexander Amelkin
2ecfda80ac Improve support for JTAG/SWD pins reuse (#11963) 
STM32 can reuse JTAG and SWD pins separately. Add `DISABLE_DEBUG` option to disable both interfaces and retain `DISABLE_JTAG` to disable JTAG only.
 2018-09-29 19:00:49 -05:00
Scott Lahteine
bb47009656 Apply sensorless changes to example configs 2018-09-29 18:54:14 -05:00
Thomas Moore
3286325044 Add TMC2130 sensorless probing 2018-09-29 18:54:14 -05:00
Scott Lahteine
7d5c336c56 Corrections for dylsexic TMC 2018-09-29 18:51:11 -05:00
Scott Lahteine
d89d8fe852 Fix Busy State in temperature.cpp 
Fix #11954
 2018-09-29 17:03:35 -05:00
Giuliano Zaro
70e7a465d8 [2.0.x] Fix compile error (#11951) 
Fix compile error intruduced with M109 modification
 2018-09-29 13:48:23 -05:00
Hannes Brandstätter-Müller
935b120949 Anycubic Kossel: probe closer to the edge (#11950) 2018-09-29 02:26:16 -05:00
Scott Lahteine
1410e79e7f Ensure M109 handles autotemp 2018-09-29 02:12:06 -05:00
Scott Lahteine
e4389f7d23
Standard methods to wait for heating (#11949) 2018-09-29 01:44:47 -05:00
Scott Lahteine
bdc9889d3a Fix a sanity check 2018-09-29 00:24:25 -05:00
Scott Lahteine
321f9140d1 Followup to #11904 2018-09-28 20:04:40 -05:00
InsanityAutomation
23114aeb81 Fix garbled M119 output. Honor NUM_RUNOUT_SENSORS (#11948) 2018-09-28 19:00:11 -05:00
Scott Lahteine
1667ed9d1c Pause should use ECHOLNPGM 2018-09-28 18:15:38 -05:00
Victor Tseng
93839e2f73 Add option to enable/disable autoretract altogether (#11904) 2018-09-28 16:52:56 -05:00
Scott Lahteine
ad21a4f07b Tweaks to HAL format and order 2018-09-28 15:59:50 -05:00
Scott Lahteine
b682a1961a Tweak STM32F7 TMC2660 class 2018-09-27 21:13:15 -05:00
Scott Lahteine
a0a3b23e35 Reduce Raptor bootscreen by 144 bytes 2018-09-27 18:24:40 -05:00
InsanityAutomation
95d793456b Add Formbot Raptor config, fix other Formbot configs (#11926) 2018-09-27 19:20:43 -04:00
Mitch Roote
d016b572e3 [2.0.x] Add pin configuration for Fysetc F6 (#11932) 2018-09-27 19:20:19 -04:00
Alexander Amelkin
84926b1d5a HAL general support for DISABLE_JTAG option (#11211) 
Some STM32-based boards may use multiplexed JTAG pins as IO. Up to now the `DISABLE_JTAG` option (defined in pins files) was only supported for AT90-based boards. This commit generalizes the code and adds support for boards based on STM32F1 and STM32F4.
 2018-09-27 19:02:50 -04:00
Scott Lahteine
c575c5d5f6
Bring example configs up to date (#11939) 2018-09-27 18:47:26 -04:00
Scott Lahteine
6b1a4f30a8 Fix case of T-Rex 3 _Statusscreen.h 2018-09-27 17:00:55 -05:00
Scott Lahteine
ab7bfa86e2 Fix case of T-Rex-3 _Statusscreen.h 2018-09-27 17:00:55 -05:00
Scott Lahteine
241168926d Update some configs 2018-09-27 16:42:59 -05:00
Scott Lahteine
cb6454118c Workaround for Pronterface M29 2018-09-27 16:27:02 -05:00
Victor Tseng
eeab4141db [2.0.x] Anycubic Trigorilla 14 pins tweak (#11869) 2018-09-27 16:06:21 -04:00
InsanityAutomation
cb9dc56630 Add GT2560 v3 support (#11914) 2018-09-27 15:13:15 -04:00
InsanityAutomation
f2e630a05e Stow probe on probing failed (#11936) 
Prevents probe from being left down should probing fail and print job continue
 2018-09-27 13:26:14 -04:00
Hannes Brandstätter-Müller
0b602ae101 [2.0.x] Fix Anycubic Kossel with Probe V1, stuck LCD message after stow (#11929) 2018-09-27 13:23:53 -04:00
Giuliano Zaro
dc11131656 [2.0.x] fix possible race condition (#11923) 
Fix some commits done in #11900
 2018-09-25 13:56:57 -04:00
Scott Lahteine
d6b9327c11 Followup for Endstop Noise Threshold 
Followup to #11912
 2018-09-25 13:50:49 -04:00
Scott Lahteine
aa6e8e9325 Tweak some config comments 2018-09-25 13:42:28 -04:00
Scott Lahteine
5490a664f5
Expose: Homing Validation and Endstop Noise Threshold (#11912) 2018-09-24 21:59:12 -04:00
Scott Lahteine
cee34f7290
Followup for BABYSTEP_HOTEND_Z_OFFSET (#11916) 2018-09-24 21:46:56 -04:00
teemuatlut
884ad75cb8 Update config files 2018-09-24 17:26:18 -04:00
Giuliano Zaro
18e456d38d [2.0.x] fix home endstop bug (DON'T MERGE, needs discussion) (#11900) 2018-09-24 16:56:01 -04:00
Scott Lahteine
6742026568 Followup for 6 extruders 2018-09-24 14:36:50 -04:00
Scott Lahteine
04bdff4115 Add a blank line 2018-09-24 12:49:02 -04:00
Marcio Teixeira
ccbd045f02 Fixed warning about comparing signed to unsigned (#11909) 2018-09-24 12:03:29 -04:00
InsanityAutomation
1104054d73 2.0 IDEX Independent z offset and other fixes (#11862) 
* Add Formbot Raptor board

Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>

* Add a second Z probe Z offset

Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>

* Modify method to utilize live adjustment of hotend z offset

Should probably move config option to babystepping and rename as it may now apply to all multiextruder systems

* Move config item and catchup other code to current method
 2018-09-24 09:40:48 -05:00
Scott Lahteine
217e0efd20
General option PAUSE_BEFORE_DEPLOY_STOW (#11905) 2018-09-24 00:43:43 -04:00
Scott Lahteine
849dea92a8 Move probe extras below probe types 2018-09-23 23:23:07 -04:00
Scott Lahteine
a2b0260f0f Update Sublime files 2018-09-23 19:59:08 -04:00
Hannes Brandstätter-Müller
a4cdffdd69 Support for manually deployed fixed probes (#11899) 2018-09-23 19:59:08 -04:00
Scott Lahteine
ddcbf80f23 Followup for Z_TRIPLE_ENDSTOPS 2018-09-23 12:22:31 -04:00
Marcio Teixeira
c411e7eb0d [2.0.x] Squelch compiler warnings seen with -Wall (#11889) 2018-09-23 12:00:34 -04:00
Roxy-3D
83105590a0 Better default values for Mesh Inset 2018-09-22 03:25:18 -04:00
Roxy-3D
4163c1a514 Fix end stop and Z-probe reporting logic 2018-09-22 03:25:18 -04:00
Scott Lahteine
ea9eb2fc8f Fix servo angles in config-store 2018-09-21 15:41:36 -04:00
Roxy-3D
d3d6be8210 Add MAX7219 reverse units option (#11860) 2018-09-19 18:54:51 -05:00
Scott Lahteine
beab9733f8 Remove extra clauses in config-store 2018-09-19 17:06:51 -05:00
Scott Lahteine
5a74b12b45 Followup to #11769 2018-09-19 16:40:32 -05:00
InsanityAutomation
f38570ac55 Add custom user menu title (#11769) 2018-09-19 15:04:34 -05:00
Scott Lahteine
17494099a9 Fix parking_extruder_tool_change 
Fix #11872
 2018-09-19 03:02:07 -05:00
Scott Alfter
140caf99b8 E0_CS_PIN moved from A13 to A15 on RAMPS-FD v2.2 (#11865) 2018-09-18 22:24:20 -05:00
Scott Lahteine
10590c2f80 Fix some fan conditionals 2018-09-18 21:23:33 -05:00
Scott Lahteine
e4ee607fc8 Fix Dual X FRS in M600 
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
 2018-09-18 21:23:33 -05:00
Scott Lahteine
bae8f82ba8
[2.0] Fix Mixing Extruder mixing factors (#11861) 2018-09-18 01:10:41 -05:00
Scott Lahteine
c5e5cc5e9f Fix some trailing whitespace, macros 2018-09-17 17:30:04 -05:00
AnHardt
54bd124665 2.0.x: Fix normalize_mix() (#11856) 
Mix factors needed to be updated consistent with the recent Stepper/Planner code refactor.
 2018-09-17 16:37:38 -05:00
Roxy-3D
5fbfbde532
Fix example file to pull in correct pins file 2018-09-17 10:41:30 -05:00
Roxy-3D
378f354939
IDEX Scaled Duplication is still under development 
Take it out of the menu until it is tested and working.
 2018-09-17 10:26:44 -05:00
Scott Lahteine
65045ba54b tmc_util fix part 2 
Followup to 115abf9
 2018-09-17 05:36:17 -05:00
Scott Lahteine
09a2bee8aa
Support more filament runout sensors in M119 (#11851) 2018-09-17 03:27:13 -05:00
Scott Lahteine
115abf9c53 Fix syntax error in front of tmc_axes 2018-09-17 01:10:20 -05:00
Roxy-3D
0780913848 IDEX Improvements (#11848) 2018-09-17 01:06:22 -05:00
Scott Lahteine
39732838b4 Tweak indent of Chinese languages 2018-09-17 00:58:32 -05:00
Scott Lahteine
53bd0b55cb Followup for 6 extruders 2018-09-16 23:57:50 -05:00
Scott Lahteine
1718eff54a Code changes supporting up to 6 extruders 2018-09-16 22:32:53 -05:00
Scott Lahteine
f5c210d33d Config changes supporting up to 6 extruders 2018-09-16 22:22:35 -05:00
Scott Lahteine
d948c6e867 RADDS Extension Board V3 support 2018-09-16 22:22:35 -05:00
Thomas Moore
c437bb08f1 Overhaul of the planner (#11578) 
- Move FWRETRACT to the planner
- Combine leveling, skew, etc. in a single modifier method
- Have kinematic and non-kinematic moves call one planner method
 2018-09-16 21:24:15 -05:00