Scott Lahteine
c0870d417a
Move some MarlinCore and MarlinUI code ( #20832 )
2021-01-21 03:40:07 -06:00
Scott Lahteine
68abaeab19
MarlinUI multi-language support ( #20725 )
2021-01-20 18:52:06 -06:00
Scott Lahteine
3f90ecfd77
Move singlenozzle temp/fan ( #20829 )
2021-01-19 20:58:50 -06:00
zeleps
1b19eed195
Fix Tramming Wizard behavior ( #20796 )
2021-01-16 23:08:48 -06:00
Marcio Teixeira
6376b683c7
Silence unused parameter warnings
2021-01-15 17:44:16 -06:00
Scott Lahteine
f2726399dd
Move WRITE_FAN
2021-01-12 22:33:03 -06:00
Johan van der Vyver
7f3dcb3e8a
Multi-platform DWIN_CREALITY_LCD support ( #20738 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2021-01-12 18:05:49 -06:00
Scott Lahteine
acda53aa1c
Clean up some includes
2021-01-10 21:38:31 -06:00
wilbur4321
e3831c146d
Multi-Z stepper inverting ( #20678 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2021-01-05 17:03:45 -06:00
Giuliano Zaro
1eb592550c
Temperature report followup ( #20687 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2021-01-05 06:18:09 -06:00
FanDjango
dc3cfd0d9d
Adjustable precision in M105 temperature report ( #20602 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2021-01-04 23:57:58 -06:00
zeleps
2f17f2207a
Don't apply hotend_offset.z to Z soft endstops ( #20675 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2021-01-04 23:48:42 -06:00
Scott Lahteine
d2e1e9a0ac
Indent tool_change_prime
2021-01-04 23:36:12 -06:00
Scott Lahteine
c0a3931595
Clarify solenoid active / magnet-on state
2021-01-04 23:09:35 -06:00
FanDjango
55d1938977
Defer "quiet probing" till the last Z bump ( #20610 )
2021-01-04 20:32:52 -06:00
Scott Lahteine
3a99d001ff
Solenoid cleanups
...
Followups to #20473 ahead of #20675
2021-01-04 19:01:45 -06:00
Scott Lahteine
ba2cadb479
Move duplication_e_mask
2021-01-03 22:23:13 -06:00
Scott Lahteine
ca47dffa35
Fix delayed_move_time elapsed test
2021-01-03 22:22:21 -06:00
InsanityAutomation
548d5603ea
Fix IDEX reboot on travel after G28 X ( #20654 )
2021-01-03 22:07:29 -06:00
Marcio T
2d88bcb67e
Fix thermal error protection, reporting ( #20655 )
2021-01-03 21:39:15 -06:00
ellensp
56a5d0b287
Homing code followup ( #20632 )
...
Patching a87e5197cf
2021-01-02 18:37:47 -06:00
Scott Lahteine
a87e5197cf
Document, adjust some homing code
2021-01-02 03:41:06 -06:00
Jason Smith
4402a0578a
Fix CHAMBER_FAN_MODE 0 build ( #20621 )
2021-01-01 14:56:59 -06:00
zeleps
815c636449
Fix PARKING_EXTRUDER homing with solenoid ( #20473 )
2021-01-01 14:54:44 -06:00
Victor Oliveira
c840bbc970
Prefix SD SPI pins (SCK, MISO, MOSI, SS) ( #20606 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2021-01-01 14:31:15 -06:00
Jason Smith
81d7bd8f41
Validate defined probe points ( #20572 )
2020-12-27 20:49:15 -06:00
Scott Lahteine
45996fd20a
Init tare pin once
2020-12-27 16:36:35 -06:00
Scott Lahteine
f423edd938
Add probe_switch_activated
2020-12-27 16:36:35 -06:00
Scott Lahteine
198b3ae0f8
Fix some comments
2020-12-27 16:27:15 -06:00
ubik2
844a8c7074
Add OPTIMIZED_MESH_STORAGE option (for UBL) ( #20371 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-12-23 18:19:48 -06:00
wmariz
c87c354403
Refactor 'Level Corners with Probe' ( #20460 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-12-23 00:10:56 -06:00
LinFor
36aff1e464
12-bit ADC resolution for STM32 ( #20519 )
2020-12-21 18:30:03 -06:00
InsanityAutomation
2963229dfa
Probe Tare, Probe Activation Switch ( #20379 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
Co-authored-by: Victor Mateus Oliveira <rhapsodyv@gmail.com>
Co-authored-by: Jason Smith <jason.inet@gmail.com>
2020-12-19 22:11:43 -06:00
InsanityAutomation
7a168205eb
Minimum temp options for Probing and G12 Nozzle Clean ( #20383 )
...
Co-authored-by: Jason Smith <jason.inet@gmail.com>
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-12-19 22:02:38 -06:00
Scott Lahteine
e5d0b27aaf
Rename QUIET_PROBING
2020-12-18 21:13:50 -06:00
rafaljot
fbcc07261d
Homing feedrates as XYZ array ( #20426 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-12-17 06:02:05 -06:00
Scott Lahteine
20b3af1cc2
Use homing_feedrate function
2020-12-16 22:19:04 -06:00
Scott Lahteine
c824086825
Adjust planner debugging
2020-12-13 01:54:31 -06:00
ellensp
22de37ad50
Fix UBL Debug Messages ( #20423 )
...
Co-authored-by: ellensp <ellensp@hotmsil.com>
2020-12-10 15:30:58 -03:00
Jason Smith
21ee7b1c86
Fix TMC_HOME_PHASE divide by zero ( #20368 )
2020-12-04 23:58:39 -06:00
Scott Lahteine
8fd8772a6f
Adjust axis homed / trusted methods ( #20323 )
2020-11-29 19:06:40 -06:00
Jason Smith
df0a0c9490
Leveling Fade Height default setting ( #20316 )
2020-11-29 15:00:08 -06:00
Štěpán Dalecký
5cae4e9f55
[WIP] Fix Probe::offset_xy ( #20290 )
...
Co-authored-by: Jason Smith <jason.inet@gmail.com>
2020-11-26 13:21:48 -08:00
wmariz
58ac815822
Level Corners with Probe option ( #20241 )
2020-11-26 07:58:19 -06:00
Scott Lahteine
7ce675e604
No auto debug for EEPROM_CHITCHAT
2020-11-26 03:56:21 -06:00
Jason Smith
3a396a25dc
Retire HAL for STM32F4 / F7 ( #20153 )
2020-11-26 00:37:18 -06:00
Scott Lahteine
296a2ad7e4
Consistent Probe XY offset type
2020-11-24 17:38:26 -06:00
Jason Smith
a4e1132048
Fix Z4 in ENABLE/DISABLE_AXIS_Z ( #20256 )
...
This was accidentally broken in PR #20218
2020-11-23 03:07:43 -08:00
Jason Smith
58eaad703a
Fix dummy thermistors for Bed, Chamber, Probe ( #20247 )
2020-11-22 18:47:52 -06:00
Orel
8db72d027e
Skip unnecessary (costly) SW Stepper Enable ( #20218 )
...
Co-authored-by: Jason Smith <jason.inet@gmail.com>
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-11-21 16:27:06 -06:00
Simone Primarosa
615bf2a6f1
Fix bad SET_FAST_PWM_FREQ calls ( #20227 )
2020-11-20 19:53:04 -06:00
Till
fcc29fc189
Add Thermistor 20-21 notes ( #19246 )
2020-11-19 14:07:47 -06:00
JoAnn Manges
cb2ec628df
Use RTD for MAX31865 reading ( #20188 )
2020-11-18 23:12:03 -06:00
Giuliano Zaro
41529b6598
SMUFF (MMU2 clone) support ( #19912 )
2020-11-18 01:27:21 -06:00
FanDjango
110e0d782f
Guards for large BLOCK_BUFFER_SIZE (>=128) ( #20130 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-16 14:56:05 -06:00
Victor Oliveira
ea371618da
Add Touch Calibration screen ( #20049 )
2020-11-15 16:39:58 -06:00
phcay
a97a1ae218
Fix extraneous Linear Advance DIR change ( #20131 )
2020-11-13 20:06:37 -06:00
Scott Lahteine
1d43e81be0
Fix compile warnings, serial alias
2020-11-13 18:28:15 -06:00
LinFor
f4e9f3654e
Fix MAX6675 SPI init, conflicts ( #20086 )
2020-11-11 16:27:45 -06:00
JoAnn Manges
40d442fde2
Fix MAX31865 on SPI (PT100/1000) support ( #20074 )
2020-11-11 15:52:35 -06:00
Costas Basdekis
0465e0ae3a
Distinct runout states ( #19965 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-11 00:39:23 -06:00
Scott Lahteine
59eca253e1
Simplified temp sensor conditionals
2020-11-09 01:17:37 -06:00
qwewer0
c753d2b7f4
Use extra G35 BLTouch HS Mode clearance in Tramming Wizard ( #20057 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-08 18:31:14 -06:00
Jason Smith
5013fdaf79
Fix tool-change servo index for E2 and up ( #20060 )
2020-11-08 02:15:30 -06:00
Scott Lahteine
06bf3ccfb7
Add alternative TERN macros
2020-11-07 22:19:25 -06:00
Scott Lahteine
dcb0f5dc3b
Temperature 'autostart' => 'auto_job'
2020-11-07 21:21:19 -06:00
Albert van Osch
7beebcd315
Zonestar Z8 XM2 support ( #19991 )
2020-11-07 16:59:19 -06:00
LinFor
2da25d67e1
Fix Endstop Interrupts with SPI endstops, sanity checks ( #20051 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-07 03:37:45 -06:00
Orel
a272c019f9
Rename, adjust Dagoma F5 ( #19947 )
2020-10-29 20:02:29 -05:00
Scott Lahteine
54ec6a0ce2
Tweak code formatting
2020-10-29 01:14:15 -05:00
Jason Smith
bdb3f1ae2f
Fix LCD menus + DAC ( #19907 )
2020-10-27 21:40:12 -05:00
Orel
e3f1f7cd85
Fix DAC-related bugs ( #19921 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-27 21:37:10 -05:00
Lucas Seiki Oshiro
c0b4f4eb47
"Sound: ON/OFF" menu item ( #19901 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-27 20:41:12 -05:00
Marcio Teixeira
a74e82fbae
Fix NO_WORKSPACE_OFFSETS compile
2020-10-27 15:05:30 -05:00
Scott Lahteine
0ffee29a11
Case light brightness cleanup ( #19856 )
...
Co-authored-by: Chris <chris@chrisnovoa.com>
2020-10-22 22:31:48 -05:00
Scott Lahteine
c75e98dc84
Shorten a method name
2020-10-22 20:54:11 -05:00
qwewer0
c7f7f2403d
Fix Chopper Timing extra axis defaults ( #19850 )
2020-10-22 20:46:48 -05:00
ManuelMcLure
4fccb92e07
Configure TMC interpolation per driver ( #19828 )
2020-10-22 06:27:33 -05:00
bilsef
9baa944460
Teensy 4.1 Ethernet support ( #19801 )
2020-10-20 14:35:29 -05:00
Scott Lahteine
92767f5513
Misc. cleanup, serial strings
2020-10-19 20:39:36 -05:00
Scott Lahteine
21ce39aa9b
Use PGM serial strings
2020-10-19 04:25:48 -05:00
InsanityAutomation
6375829448
Apply home offsets to probing, Z Safe Homing ( #19423 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-18 15:53:12 -05:00
Jago Strong-Wright
c2802d35bb
Distinct Chopper Timing settings ( #19781 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-10-17 22:35:19 -05:00
Sten Uusvali
6fed11896b
Fix M503 output for M907 motor current ( #19777 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-10-17 16:11:22 -05:00
Scott Lahteine
eaf6777a66
Rename ultralcd => marlinui
2020-10-16 19:55:18 -05:00
nb-rapidia
418b3e5ee2
Fix IDEX layer shift and DIR states ( #19756 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-16 16:59:55 -05:00
Victor Oliveira
0b80841c38
Fix Color UI external_control, wait_for_release ( #19771 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-16 16:19:48 -05:00
Victor Oliveira
e370834c35
Handle M410 in the main task ( #19752 )
2020-10-16 16:11:00 -05:00
Jason Smith
9a23fb5863
Fix SET_SOFT_ENDSTOP_LOOSE w/out soft endstops ( #19734 )
2020-10-14 13:50:03 -05:00
Scott Lahteine
733eb127e9
Simple bool in soft_endstops_t
2020-10-13 14:55:14 -05:00
Earle F. Philhower, III
193c0a52d9
Add loose soft endstop state, apply to UBL fine-tune ( #19681 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-12 16:48:04 -05:00
Jason Smith
a866a758cc
Allow MAX31865 resistance values configuration ( #19695 )
2020-10-12 00:40:39 -05:00
Jason Smith
edda32e6b4
Fix motion compile w/out probe-oriented settings ( #19684 )
2020-10-11 19:42:50 -05:00
Jason Smith
c762b7c91b
Fix various errors, warnings in example config builds ( #19686 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-11 19:06:57 -05:00
Scott Lahteine
492ba2a111
Digipots refactor / cleanup ( #19690 )
2020-10-11 14:58:35 -05:00
Victor Oliveira
8e03a4cb93
Keep HAL tasks running during PID Autotune ( #19671 )
2020-10-09 23:35:41 -05:00
Scott Lahteine
2c6ec0c999
Chamber vent/fan followup
2020-10-06 19:42:11 -05:00
ladismrkolj
2c99c1e06f
Add Chamber servo vent, auto fan ( #19519 )
2020-10-06 18:36:01 -05:00
ellensp
d88e694d06
Fix Z_AFTER_HOMING without probe ( #19607 )
2020-10-04 16:47:06 -05:00
qwewer0
4424645e04
Multi-line comments cleanup ( #19535 )
2020-09-28 14:53:50 -05:00
Scott Lahteine
c2c6a679ea
Rename LCD conditionals ( #19533 )
2020-09-28 01:13:27 -05:00
Emperor
00c09e95ac
Thermistor: Kis3d Silicone heater + precision cast plate ( #19528 )
2020-09-27 21:38:30 -05:00
Siana Gearz
7415e4e66d
Fix Allen Key Probe pin test ( #19520 )
2020-09-27 21:25:35 -05:00
Scott Lahteine
ecc8013812
Whitespace cleanup
2020-09-23 17:43:32 -05:00
ellensp
e3d4e328f9
Preserve brightness in EEPROM validate ( #19485 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-09-23 15:44:15 -05:00
Jason Smith
5d0429ee2a
Catch a TMC address conflict early ( #19458 )
2020-09-22 20:36:31 -05:00
Victor Oliveira
79dc8a2297
Define <u8,u8,u8>::softSPI ( #19419 )
2020-09-22 15:44:17 -05:00
makerbase
d8ed749045
Add MKS Robin E3P, improve LVGL UI ( #19442 )
2020-09-20 20:55:02 -05:00
Scott Lahteine
76d8d1742c
Add multi-extruder condition
2020-09-20 20:51:21 -05:00
Marcio T
9fd06fa767
Fix case light brightness save/load ( #19436 )
2020-09-19 09:23:56 -05:00
cosmoderp
073b7f1e3a
E3 V2 DWIN: Z-Offset, cleanup, versatility ( #19384 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-09-17 05:35:04 -05:00
ellensp
979876e958
Improve temperature runaway, idle timeout ( #19339 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-09-13 23:58:39 -05:00
Scott Lahteine
49ca16c3fb
heater_ind_t => heater_id_t
2020-09-13 18:22:28 -05:00
ManuelMcLure
c04d5624da
Read from backup TMC StealthChop state ( #19364 )
2020-09-12 22:59:20 -05:00
Neskik
1917ed8741
M872 wait for probe temperature ( #19344 )
2020-09-11 22:51:19 -05:00
bilsef
049fbc92a9
Support for Teensy 4 ( #19311 )
2020-09-09 18:57:20 -05:00
Giuliano Zaro
828a582f4d
Make M600 heat up the nozzle. Reset runout on fail. ( #19298 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-09-07 21:29:45 -05:00
Scott Lahteine
a445746a8b
Clean up LCD conditionals, DWIN
2020-09-06 23:21:42 -05:00
Victor Sokolov
e97e6865c3
MarkForged kinematics ( #19235 )
2020-09-03 20:12:53 -05:00
Scott Lahteine
e0b413cf19
Add set_all_homed
2020-08-27 16:38:26 -05:00
swissnorp
a12ac5e175
Mark axes not-homed with HOME_AFTER_DEACTIVATE ( #18907 )
2020-08-27 16:05:53 -05:00
Scott Lahteine
462d3eeab1
set_axis_not_trusted => set_axis_never_homed
2020-08-27 14:49:00 -05:00
thordarsen
195d20cef2
Fix SINGLENOZZLE fan speed bug ( #19152 )
2020-08-26 05:23:56 -05:00
Scott Lahteine
4955aa5b78
Prusa => Průša
2020-08-26 02:15:50 -05:00
Colin Godsey
131ddeaeba
Direct Stepping update ( #19135 )
2020-08-26 01:32:56 -05:00
Giuliano Zaro
f67ad6fd70
Fix auto-power in PID autotune ( #19119 )
2020-08-24 09:54:25 -05:00
Scott Lahteine
7807b613d5
Update some comments
2020-08-21 02:59:23 -05:00
Giuliano Zaro
3426c7fc94
Configurable number of M106 fans ( #18883 )
2020-08-19 20:11:20 -05:00
Steven Haigh
a62ae2aa2d
Default Filament Runout Sensor enabled state ( #19013 )
2020-08-19 18:58:18 -05:00
Giuliano Zaro
d3c5161476
Fix __ARM__ / __arm__ typo ( #19063 )
2020-08-19 02:59:37 -05:00
Giuliano Zaro
f205bff2cc
Fix PSU on for PID autotune ( #19066 )
2020-08-19 02:49:46 -05:00
Scott Lahteine
56b35fc103
Do runout.reset after EEPROM read
2020-08-14 00:16:22 -05:00
swissnorp
3ddb720722
Fix 'sync_plan_position' call ( #19016 )
2020-08-13 22:37:57 -05:00
Giuliano Zaro
ce3df42e22
Fix DISABLE_[XYZE] code ( #18970 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-08-09 20:48:57 -05:00
cbaugher
837dc4727d
Tool-change Z move followup ( #18963 )
2020-08-09 15:46:47 -05:00
sherwin-dc
852e5ae042
Password via G-code and MarlinUI ( #18399 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-08-08 20:00:42 -05:00
Scott Lahteine
97cb0a8c3e
General cleanup
2020-08-08 00:17:09 -05:00
Scott Lahteine
18adfe87bc
configuration_store => settings
2020-08-07 20:52:23 -05:00
cbaugher
7b2f7a94fa
Fix Z height after tool change ( #18951 )
2020-08-07 18:06:25 -05:00
Scott Lahteine
99ba866d8d
Optimize G-code / feature dependencies ( #18919 )
2020-08-06 08:14:00 -05:00
swissnorp
4856ac5028
Add Z_AFTER_DEACTIVATE to account for gravity ( #18906 )
2020-08-04 00:31:45 -05:00
Alexander Gavrilenko
117df87d19
Support for TFT & Touch Screens ( #18130 )
2020-07-30 01:43:19 -05:00
Victor Tseng
5d14c3712f
Fix DELTA + TMC sensorless homing + SPI endstops ( #18811 )
2020-07-27 20:15:14 -05:00
MKS-Sean
d20d459132
Robin nano V2, TFT LVGL UI parameters, and more ( #18500 )
2020-07-25 01:18:06 -05:00
Scott Lahteine
d1e20eb29f
Update links, README, contributing, etc.
2020-07-23 20:46:51 -05:00
Diego von Deschwanden
42fbd527f3
Fix links to secure sites ( #18745 )
2020-07-22 22:20:14 -05:00
Jason Smith
f9b1da7beb
Linear Advance: Only change E DIR when needed ( #18744 )
2020-07-22 22:17:33 -05:00
Jason Smith
a847f37d43
Reduce Step Smoothing ceiling to 50% CPU usage ( #18719 )
2020-07-19 21:53:29 -05:00
Victor Oliveira
4a55bdb165
Only download & compile required libraries ( #18699 )
2020-07-19 21:42:30 -05:00
Scott Lahteine
ef90cb7c97
PLR followup
2020-07-15 01:20:52 -05:00
Jason Smith
76b67d55e2
Fix some Power Loss Recovery behaviors ( #18558 )
2020-07-15 01:14:03 -05:00
Scott Lahteine
55e519a06f
General cleanup
2020-07-14 21:27:49 -05:00
Scott Lahteine
2d33a9fd7c
Add REPORT_FAN_CHANGE as an option
2020-07-14 21:15:14 -05:00
Scott Lahteine
b40440cf38
Tool-change debug option
2020-07-14 21:15:14 -05:00
Scott Lahteine
0e1cb10909
Fix / improve menu items ( #18644 )
2020-07-13 19:59:32 -05:00
Speaka
2c238e4fc2
Option for extra endstop check ( #18424 )
2020-07-12 13:16:56 -05:00
Axel
c4dd0082a1
Option to assist thermocouple debug ( #18621 )
2020-07-11 00:23:48 -05:00
Scott Lahteine
73fc0778b8
Consolidate probe clearance, add section debug ( #18576 )
...
* Better section / function log
* Add do_z_clearance motion function
2020-07-08 21:44:21 -05:00
ellensp
c2e0e61fe8
Fix User Temp Sensor (1000), reversed Pt100 / Pt1000 ( #18590 )
2020-07-08 06:28:32 -05:00
Scott Lahteine
d6682c8609
Whitespace cleanup
2020-07-07 02:30:26 -05:00
Scott Lahteine
9546847dc1
Temp Residency followup
2020-07-07 01:51:09 -05:00
ellensp
12e7106a8a
Update and fix POWER_MONITOR ( #18561 )
2020-07-06 18:53:26 -05:00
espr14
ea8c3a9388
Reduce 'first loop' temperature residency time ( #18421 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-07-06 18:52:21 -05:00
Giuliano Zaro
9ee891c4a6
Fix TMC homing phase coils alignment ( #18528 )
...
Co-authored-by: Fabio Santos <fabiosan@live.com>
2020-07-06 17:32:33 -05:00
J.C. Nelson
6f14d2d37f
Add Lerdge S,X,K ( #18302 )
2020-07-06 17:08:52 -05:00
Robby Candra
c02451b602
Filament Runout Inverting => State ( #18537 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-07-05 17:42:19 -05:00
Scott Lahteine
dc6d8357a6
Reduce string duplication
2020-07-05 16:00:32 -05:00
ellensp
6df927d3b2
Fix thermistors exist-for-reading tests ( #18533 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-07-04 20:04:31 -05:00
Scott Lahteine
f6a2b64091
Clean up LCD Manual Move / UBL Mesh Edit ( #18373 )
2020-07-03 09:53:22 -05:00
Scott Lahteine
7b6629c08c
Extend thermistor 1047 to 500°C
2020-07-01 23:07:44 -05:00
Scott Lahteine
c43bbcce15
Enforce sensor range for temperature target ( #18465 )
...
* Mitigate stepper timeout
* Add CHAMBER PWM code
* Structured thermistor tables
* Fix reversed sensor ranges
* Prevent temps outside sensor range
2020-07-01 16:27:28 -05:00
Scott Lahteine
70fa4c9323
Per-Hotend Default PIDs ( #18483 )
2020-07-01 16:18:20 -05:00
Scott Lahteine
48151d1778
ClosedLoop as singleton
2020-06-28 14:35:23 -05:00
Fabio Santos
29753baeee
Adjustable delta_diagonal_rod_trim ( #18423 )
2020-06-27 23:53:44 -05:00
JP Flouret
31349fd69a
Fix "probing failed" false positives ( #18435 )
2020-06-27 23:09:15 -05:00
InsanityAutomation
c1dcc56a0b
Tool Change Migration fixes and debugging ( #18448 )
2020-06-27 21:57:01 -05:00
Scott Lahteine
a907e15ae6
Allow larger ADC debounce
...
Reference #17205
2020-06-26 19:31:07 -05:00
Scott Lahteine
f445bc26e5
Minor LCD cleanup, improvement
2020-06-25 22:23:22 -05:00
Scott Lahteine
43a994e0df
Fix material preset editing
2020-06-24 20:15:23 -05:00
Scott Lahteine
4275466f49
Fix issues with no hotend / bed / fan ( #18395 )
2020-06-24 19:44:50 -05:00
Fabio Santos
25c7c43a82
Add SERIAL_FLOAT_PRECISION option ( #18367 )
2020-06-22 21:12:45 -05:00
Kirill Vergun
1ea4e393c9
No 'probing failed' with retry ( #18379 )
2020-06-22 19:50:46 -05:00
MoellerDi
3bfbd47c6d
Fix 3-point middle point ( #18383 )
2020-06-22 15:37:14 -05:00
Scott Lahteine
31167c158b
TMCStepper 0.7.0
2020-06-21 22:17:48 -05:00
brian park
bc9e5e2abc
Fix _CAN_HOME (Y homing) bug ( #18356 )
2020-06-19 18:19:29 -05:00
Giuliano Zaro
88e4dffe88
Fix PID autotune timeout ( #18352 )
2020-06-18 16:05:12 -05:00
brian park
8e20691f42
Fix Core axis babystepping ( #18342 )
2020-06-18 15:28:52 -05:00
Scott Lahteine
424569b4c4
Power monitor and display ( #17437 )
2020-06-18 15:23:03 -05:00
Scott Lahteine
51be595573
Fix core babystep compile
2020-06-16 13:48:14 -05:00
Scott Lahteine
f4c258dc23
Creality Ender 3 v2 ( #17719 )
2020-06-16 01:45:27 -05:00
makerbase
642112d3eb
Add MKS UI (TFT_LITTLE_VGL_UI) ( #18071 )
2020-06-15 21:05:33 -05:00
XDA-Bam
a4b46eaf8f
Add JD_HANDLE_SMALL_SEGMENTS option ( #18316 )
2020-06-15 18:54:00 -05:00
Scott Lahteine
aea60d9450
Clean up trailing spaces
2020-06-15 18:11:32 -05:00
InsanityAutomation
955971486b
Fix toolchange compile error ( #18312 )
2020-06-15 16:26:09 -05:00
Per Ivar Nerseth
10601a932a
Zonestar P802M bed thermistor ( #18289 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-06-14 20:09:25 -05:00
MoellerDi
2ddd7d2d8d
Fix extra comma typo ( #18262 )
2020-06-11 20:44:48 -05:00
MoellerDi
f2b2b391db
Fix EEPROM struct ( #18234 )
2020-06-08 19:54:39 -05:00
Luu Lac
0fa345f98f
Laser updates followup ( #18237 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-06-08 19:53:39 -05:00
MoellerDi
bac760207c
Add volumetric extrusion limit ( #17017 )
2020-06-08 03:24:46 -05:00
Luu Lac
eda2fd8dbe
Improvements for Laser / Spindle ( #17661 )
2020-06-08 00:47:31 -05:00
