Scott Lahteine
048486390e
Bring some configs up to date
2018-01-11 01:10:17 -06:00
GMagician
5295b4713d
[2.0.x] add semitec 104NT-4 ( #9119 )
...
Table is very very similar to old 104-GT2 so I added only the name and recycled old ID
2018-01-09 16:53:12 -06:00
Thomas Moore
f0a8a1a853
[2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE ( #8866 )
...
* Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
2017-12-25 01:38:06 -06:00
Scott Lahteine
28fc8741d6
Reduce default jerk. XY by half. Z by 1/4
2017-12-24 19:54:11 -06:00
Scott Lahteine
1cf1cf8759
Add RADDS_DISPLAY to example configs
2017-12-24 19:00:23 -06:00
Scott Lahteine
f79026acc1
Apply MKS_12864OLED_SSD1306 to examples
...
Followup to #8814
2017-12-16 20:15:36 -06:00
Scott Lahteine
9abbcc3ee0
Apply ZONESTAR_LCD to example configs
2017-12-15 19:11:02 -06:00
Scott Lahteine
69d49a2438
Shorter segments may be better
2017-12-09 06:29:14 -06:00
Scott Lahteine
d7800e7975
Apply MULTIPLE_PROBING to example configs
2017-12-07 16:44:12 -06:00
Richard Wackerbarth
c1184552ac
Change K1 to required option PID_K1
2017-12-05 19:59:59 -06:00
Scott Lahteine
aa7efb96bf
Bring configurations up to date
2017-12-02 21:50:51 -06:00
Scott Lahteine
082ab8fcab
Add SKEW_CORRECTION to example configs
2017-12-01 19:22:27 -06:00
Scott Lahteine
7c61bcb058
Apply SEGMENT_LEVELED_MOVES to example configs
2017-11-29 16:57:31 -06:00
Scott Lahteine
5926c9c97b
Followup for MESH_EDIT_GFX_OVERLAY
2017-11-24 15:53:25 -06:00
Scott Lahteine
5ce7f23afa
Config option G26_MESH_VALIDATION for all meshes
2017-11-23 21:43:23 -06:00
Scott Lahteine
3f0a982b8c
Move Filament Width Sensor to Configuration_adv.h
2017-11-13 21:05:57 -06:00
Scott Lahteine
b76e173205
Move test extrusion options under G26
2017-11-13 21:05:57 -06:00
Scott Lahteine
81b91b3f9d
Clean up some trailing white-space
2017-11-10 02:31:04 -06:00
Roxy-3D
967104e1ce
Default Extrusion Settings were off a few lines in some of the example config files. ( #8333 )
2017-11-08 11:56:00 -06:00
Roxy-3D
ed62c621d7
Fix G26 Circle Drawing. Add Default Extrusion Settings ( #8313 )
...
- Fix G26 Circle Drawing.
- Add default extrusion settings so machine can print lines on print bed
- Yet to be done: Get LCD Menu's to use these settings.
2017-11-07 17:13:53 -06:00
Scott Lahteine
2c099fd4c2
Update Thermal Protection Documentation
2017-11-07 15:46:44 -06:00
Scott Lahteine
7e43dd1d23
Fix probes configuration url
...
Based on #8241 by @machaj
2017-11-03 13:35:40 -05:00
teemuatlut
70be4d206e
[2.0.x] UltiMachine Archim2 ( #8190 )
...
* UltiMachine Archim2 support
* SPI gets included by the library
* Invert TMC2130 diag pin state
* Clean up Archim2 pins
* Update Archim2 config
* FAN2 -> FAN1
* Cleanup
* Add brief Archim installation instructions
* Bring pins into compliance
* Update 1.0 SD Detect pin for 1.1
* Update Configuration.h
* Update pins_ARCHIM2.h
2017-11-03 04:48:15 -05:00
