Commit Graph

738 Commits

Author SHA1 Message Date
InsanityAutomation
74cd6cb4fc Single nozzle filament change (#11994) 2018-10-07 17:06:14 -05:00
teemuatlut
dffb4c63dc [2.0.x] TMC2660 followup (#12029)
* Don't react to s2g on TMC2660. False positives
* Init with sensorless probing as well
2018-10-07 15:37:44 -05:00
Scott Lahteine
d6b0fbd771
Use uint8_t for all fan speeds (#12032) 2018-10-07 15:34:41 -05:00
Scott Lahteine
65b8f3821b Suppress temperature.h compile warning 2018-10-06 19:29:41 -05:00
teemuatlut
c447d75916 Add support for TMC2660 (#11998) 2018-10-06 17:18:10 -05:00
Scott Lahteine
e8d677620c Use NUM_SERVOS in EEPROM code
Fix #12015
2018-10-06 15:11:32 -05:00
Thomas Moore
49823a4939 Fix broken jerk handling (#12019)
Fix #12004
2018-10-06 12:02:50 -05:00
Scott Lahteine
c40ea1f0fd Update EEPROM_VERSION
And set EEPROM_OFFSET to 0, since the historical 100 skipped bytes are never used.
2018-10-03 11:34:34 -05:00
Scott Lahteine
1358bd9319 Make MAX_EXTRUDERS always 6 2018-10-03 11:32:19 -05:00
teemuatlut
c3229e1b34 Migrate to a new TMC library (#11943) 2018-10-03 02:48:49 -05:00
Scott Lahteine
e3f7b69105
Add PROBING_STEPPERS_OFF (#11984)
Co-Authored-By: houseofbugs <houseofbugs@gmail.com>
2018-10-02 05:13:58 -05:00
Thomas Moore
ab4549d2bc [2.0.x] Add simultaneous retraction for mixing extruder (#11941) 2018-10-01 23:32:02 -05:00
Scott Lahteine
11ac75edcb
Use PGM_P for PSTR pointers (#11977) 2018-09-30 23:44:33 -05:00
Scott Lahteine
3c40933713 Remove trailing spaces, old comment 2018-09-30 20:47:06 -05:00
AnoNymous
b30ca652ae Replace MIN# / MAX# with variadic MIN / MAX (#11960) 2018-09-30 04:59:14 -05:00
Scott Lahteine
9903305dda
Merge pull request #9582 from tcm0116/2.0.x-sensorless_probing
[2.0.x] Add TMC2130 sensorless probing
2018-09-29 21:02:22 -05:00
Scott Lahteine
14df753086 Correction for block->mix_steps
Fix #11484
2018-09-29 19:13:17 -05:00
Thomas Moore
3286325044 Add TMC2130 sensorless probing 2018-09-29 18:54:14 -05:00
Scott Lahteine
d89d8fe852 Fix Busy State in temperature.cpp
Fix #11954
2018-09-29 17:03:35 -05:00
Scott Lahteine
e4389f7d23
Standard methods to wait for heating (#11949) 2018-09-29 01:44:47 -05:00
InsanityAutomation
23114aeb81 Fix garbled M119 output. Honor NUM_RUNOUT_SENSORS (#11948) 2018-09-28 19:00:11 -05:00
Victor Tseng
93839e2f73 Add option to enable/disable autoretract altogether (#11904) 2018-09-28 16:52:56 -05:00
InsanityAutomation
f2e630a05e Stow probe on probing failed (#11936)
Prevents probe from being left down should probing fail and print job continue
2018-09-27 13:26:14 -04:00
Hannes Brandstätter-Müller
0b602ae101 [2.0.x] Fix Anycubic Kossel with Probe V1, stuck LCD message after stow (#11929) 2018-09-27 13:23:53 -04:00
Giuliano Zaro
dc11131656 [2.0.x] fix possible race condition (#11923)
Fix some commits done in #11900
2018-09-25 13:56:57 -04:00
Scott Lahteine
d6b9327c11 Followup for Endstop Noise Threshold
Followup to #11912
2018-09-25 13:50:49 -04:00
Scott Lahteine
5490a664f5
Expose: Homing Validation and Endstop Noise Threshold (#11912) 2018-09-24 21:59:12 -04:00
Scott Lahteine
cee34f7290
Followup for BABYSTEP_HOTEND_Z_OFFSET (#11916) 2018-09-24 21:46:56 -04:00
Giuliano Zaro
18e456d38d [2.0.x] fix home endstop bug (DON'T MERGE, needs discussion) (#11900) 2018-09-24 16:56:01 -04:00
InsanityAutomation
1104054d73 2.0 IDEX Independent z offset and other fixes (#11862)
* Add Formbot Raptor board

Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>

* Add a second Z probe Z offset

Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>

* Modify method to utilize live adjustment of hotend z offset

Should probably move config option to babystepping and rename as it may now apply to all multiextruder systems

* Move config item and catchup other code to current method
2018-09-24 09:40:48 -05:00
Scott Lahteine
217e0efd20
General option PAUSE_BEFORE_DEPLOY_STOW (#11905) 2018-09-24 00:43:43 -04:00
Scott Lahteine
a2b0260f0f Update Sublime files 2018-09-23 19:59:08 -04:00
Hannes Brandstätter-Müller
a4cdffdd69 Support for manually deployed fixed probes (#11899) 2018-09-23 19:59:08 -04:00
Marcio Teixeira
c411e7eb0d [2.0.x] Squelch compiler warnings seen with -Wall (#11889) 2018-09-23 12:00:34 -04:00
Roxy-3D
4163c1a514 Fix end stop and Z-probe reporting logic 2018-09-22 03:25:18 -04:00
Scott Lahteine
ea9eb2fc8f Fix servo angles in config-store 2018-09-21 15:41:36 -04:00
Scott Lahteine
beab9733f8 Remove extra clauses in config-store 2018-09-19 17:06:51 -05:00
Scott Lahteine
17494099a9 Fix parking_extruder_tool_change
Fix #11872
2018-09-19 03:02:07 -05:00
Scott Lahteine
c5e5cc5e9f Fix some trailing whitespace, macros 2018-09-17 17:30:04 -05:00
Scott Lahteine
09a2bee8aa
Support more filament runout sensors in M119 (#11851) 2018-09-17 03:27:13 -05:00
Roxy-3D
0780913848 IDEX Improvements (#11848) 2018-09-17 01:06:22 -05:00
Scott Lahteine
53bd0b55cb Followup for 6 extruders 2018-09-16 23:57:50 -05:00
Scott Lahteine
1718eff54a Code changes supporting up to 6 extruders 2018-09-16 22:32:53 -05:00
Thomas Moore
c437bb08f1 Overhaul of the planner (#11578)
- Move FWRETRACT to the planner
- Combine leveling, skew, etc. in a single modifier method
- Have kinematic and non-kinematic moves call one planner method
2018-09-16 21:24:15 -05:00
Holger Müller
1a6f2b29b8 Add support for Triple-Z steppers/endstops 2018-09-16 00:35:58 -05:00
Scott Lahteine
215eee4fe5 Use 'friend' to access set_directions 2018-09-15 20:11:10 -05:00
Cassiano Leal
ff51e7322d Fix for Stepper::set_directions() compilation error (#11838) 2018-09-15 19:31:51 -05:00
Scott Lahteine
809b232fa2 Fix stepper directions after M501/M502
See https://github.com/MarlinFirmware/Marlin/issues/11103#issuecomment-421387611

Co-Authored-By: tcm0116 <tcm0116@users.noreply.github.com>
2018-09-14 20:00:55 -05:00
HenningJW
4fb2134f00 Fix non-sensical values for Zonestar themistor table (#11817)
Values taken from Zonestar firmware for P802QA with a Melzi board. Timestamps from the firmware package are from April 2016.
2018-09-12 15:36:04 -05:00
Scott Lahteine
b220a825a7 Fix raw_filwidth_value error 2018-09-12 04:31:55 -05:00
Scott Lahteine
8584d3697d Fix servo count define conflict
`MAX_SERVOS` => `NUM_SERVO_PLUGS`
2018-09-11 16:20:31 -05:00
Scott Lahteine
d882717d98
Save some PROGMEM with constexpr (#11798)
When possible, make `active_extruder` a `constexpr` to save some PROGMEM.
2018-09-10 23:09:26 -05:00
Sam Lane
4f883d5971 [2.0.x] Extruder-Distinct Linear Advance K Factors (#11789) 2018-09-10 22:37:32 -05:00
Sam Lane
1b6bc19427 Add external closed loop controller support 2018-09-10 03:17:17 -05:00
Sebastianv650
7e8c073fba Fix extruder stops extruding with LA (#11758) 2018-09-09 00:04:14 -05:00
Scott Lahteine
0c01099f17 hop_amount => current_hop 2018-09-08 21:20:37 -05:00
Kevin
e25d2ae4a2 [2.0.x] SWITCHING_TOOLHEAD (#11623) 2018-09-08 01:43:24 -05:00
Scott Lahteine
dcfde2317f
Pass segment length in prepare_kinematic_move_to (#11737) 2018-09-06 01:40:22 -05:00
AnHardt
530a13ab6c [2.0.x] SECURITYFIX missing max temp error when PID is used (#11717) 2018-09-05 01:41:45 -05:00
scott0122
72fdb6bab3 Fix SWITCHING_NOZZLE zdiff (#11683) 2018-09-03 23:24:40 -05:00
Scott Lahteine
d1ceaf5550
[2.0.x] Followup to IDEX changes (#11707) 2018-09-03 23:15:31 -05:00
Scott Lahteine
8e18e48d49
Merge pull request #11610 from Freeviv/bugfix-2.0.x
[2.0.x] Editable servo angles
2018-09-03 03:55:38 -05:00
Giuliano Zaro
59e76e5fdf [2.0.x] Fix planner computation (#11708)
Fix #11697
2018-09-03 00:29:29 -05:00
Roxy-3D
7680b64aa6
IDEX clean up (#11690) 2018-09-02 10:18:59 -05:00
teemuatlut
49e107cea9 Restrict SW serial to AVR (#11696) 2018-09-01 15:24:44 -05:00
Scott Lahteine
d55f44edba
Printcounter improvements (#11689) 2018-08-31 17:40:39 -05:00
scott0122
ada85d5585 Improve HOTEND OFFSET Z display precision to 3 (#11686) 2018-08-31 15:15:40 -05:00
Scott Lahteine
3e81745e81 Fix issues, make optional 2018-08-29 17:58:02 -05:00
Jan
aa80e448e2 Store servo angles in EEPROM 2018-08-29 17:58:02 -05:00
scott0122
6dc9553aa5 Fix SWITCHING_NOZZLE compile error (#11657) 2018-08-27 21:25:25 -05:00
Scott Lahteine
d1c9517903 Followup to hotend_offset[Z] patch 2018-08-24 21:32:00 -05:00
Scott Lahteine
e2b8fc4f17 Reduce some debug strings 2018-08-24 21:11:39 -05:00
Scott Lahteine
acf5ae3083 !ENABLED => DISABLED 2018-08-24 16:36:37 -05:00
Kevin
6483285bc5 HOTEND_OFFSET_Z always available (#11603) 2018-08-22 00:21:29 -05:00
Scott Lahteine
f0dbe61692 Tweaks to motion.h reachable tests 2018-08-21 23:34:29 -05:00
Roxy-3D
cd9868f442
Make position_is_reachable() smarter about IDEX machines`
On many IDEX machines the allowed travel of the X1 carraige and X2 carraige does not perfectly overlap.

This helps the issue.   But more work needs to be done at the higher level.  (For example the X1_MAX_POS should probably be factored into G26's mesh validation pattern.)
2018-08-21 19:12:26 -05:00
Scott Lahteine
ad12b9b46b Fix indentation, whitespace, spelling, formbot pins... 2018-08-21 09:47:57 -05:00
Kevin
db30650731 Fix UBL/Homing (#11566) 2018-08-16 08:28:40 -05:00
InsanityAutomation
9de730b2bf Update tool_change.cpp (#11559) 2018-08-15 19:30:52 -05:00
Scott Lahteine
1561e61df7 New TMC2208 constructor
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
2018-08-14 18:41:51 -05:00
Nils Hasenbanck
b37bfeffeb [2.0.x] Use the new const functions of the persistentStore api (#11544) 2018-08-14 18:35:36 -05:00
Dave Johnson
c64199941e Compile only selected PIO environment (#11519) 2018-08-14 03:28:52 -05:00
Scott Lahteine
6964e1a95a Clean up trailing whitespace 2018-08-14 00:55:37 -05:00
Scott Lahteine
a4b0148365 Easier to find 'static inline' 2018-08-13 23:55:33 -05:00
Nils Hasenbanck
577aeb4aa9 All EEPROM access uses persistentStore 2018-08-13 17:43:35 -05:00
Scott Lahteine
6a8b906318 Followup for persistent_store_api.h 2018-08-13 17:43:35 -05:00
Chris Pepper
66d2b48b59 Update PersistentStore api (#11538)
- Clean up the API to use a `static` class instance to adhere to Marlin convention
- Add `const` position data access for read/write
- Add Storage capacity to the interface
2018-08-13 17:30:25 -05:00
Scott Lahteine
f1347f783d Optimize thermistor table 71
agData in Table 71 is extremely oversampled (see Issue #11220). I have removed the data points that perform *worse* than linearly interpolating the remaining points, and fixed up two points that were simply rounded incorrectly.

Co-Authored-By: Aaron Griffith <aargri@gmail.com>
2018-08-13 02:54:55 -05:00
Scott Lahteine
c93538e9f3 UBL/planner patch tweaks 2018-08-11 22:50:45 -05:00
Thomas Moore
fc55f1da01 Account for UBL correction when setting the planner position (#11486) 2018-08-10 13:00:50 -05:00
Giuliano
e85feb2545 [2.0.x] Better timing handling (#11461) 2018-08-06 23:13:36 -05:00
Scott Lahteine
79835590e3
Easier to disable homing validation (#11458) 2018-08-06 23:11:37 -05:00
Scott Lahteine
9c62c47579
[2.0.x] Fix Dual X Carriage tool change crash (#11447) 2018-08-03 20:47:29 -05:00
Scott Lahteine
b826bf4194
Fix initial safe_speed in jerk code (#11417) 2018-07-30 22:50:08 -05:00
Roxy-3D
16432376ab
Revert "[2.0.x]Idex and bl touch fixes" (#11407)
* Revert "[2.0.x] bltouch home refinements (#11397)"

This reverts commit 74900f7a70.

* Revert "[2.0.x]Idex and bl touch fixes (#11395)"

This reverts commit 6dafb90c01.
2018-07-28 23:14:46 -05:00
Giuliano
74900f7a70 [2.0.x] bltouch home refinements (#11397)
Just create  a better functions call logic flow
2018-07-28 19:30:14 -05:00
silentninja1
6dafb90c01 [2.0.x]Idex and bl touch fixes (#11395)
* Fix BLTouch homing

Deploy at start, dont call generic stow function at finish or raise goes too high before setting 0

* Update tool_change.cpp

* Update motion.cpp

* Update motion.cpp

* Update motion.cpp

* Update motion.cpp

* Change brackets to be more in align of Marlin coding standards
2018-07-28 10:33:31 -05:00
Giuliano
5ce5ff8e9b [2.0.x] fix bltouch homing (#11379)
Partially revert. Seems to solve the issue, but one report says G29 still fails.
2018-07-27 18:30:08 -05:00
Lee Olivares
094e6d81a5 Add Einstart-S support (#11219)
Indeed the HAL does not need to be mucked around with to expose ATmega2560 pins not available as numbers on the MEGA board, I'll need to update the wiki with that tidbit and a reference to the pin-mapping comment in `fastio_1280.h`.
2018-07-26 05:52:22 -05:00
Giuliano
4237c3d9f8 [2.0.x] different bltouch init (#11135) 2018-07-26 05:04:09 -05:00
Andy Shaw
624986d423 Ensure ADC conversion is complete before reading (#11336)
The current Marlin implementation relies on a timer interrupt to start the ADC conversion and read it. However in some circumstances the interrupt can be delayed resulting in insufficient time being available for the ADC conversion. This results in a bad reading and false temperature fluctuations. These changes make sure that the conversion is complete (by checking the ADC hardware via the HAL) before reading a value.

See: https://github.com/MarlinFirmware/Marlin/issues/11323
2018-07-26 03:59:19 -05:00
Scott Lahteine
22ebbc091f Tweak some SoftPWM code 2018-07-25 18:09:31 -05:00
teemuatlut
fbcdf5eaeb Simplify stepper driver per-axis selection 2018-07-25 02:47:43 -05:00
Eyal
fbdbe53290 Fix get_period_inverse(0) so it doesn't crash (#11334) 2018-07-25 01:58:40 -05:00
Scott Lahteine
63a146d424 planner.synchronize at start of tool_change
See https://github.com/MarlinFirmware/Marlin/issues/10949#issuecomment-398540498
2018-07-18 20:10:55 -05:00
Roxy-3D
71df1f7f57
Don't display M421 information for UBL at startup
It takes too long to display the mesh data for large mesh's at startup.   We should consider ways to speed this up.
Perhaps it makes sense to display an entire row of the mesh instead of just one mesh point?
2018-07-17 17:19:52 -05:00
Giuliano
e5ea9d200f [2.0.x] fix kill printer (#11260)
This will fix kill message on dual printer with 0 alignment offset
2018-07-13 23:12:43 -05:00
Scott Lahteine
25e2ca8896 Add Z_CLEARANCE_MULTI_PROBE
Co-Authored-By: nightgryphon <ngryph@gmail.com>
2018-07-12 22:46:34 -05:00
Scott Lahteine
566d05006d report_state > event_handler
Make the endstop report method track endstop changes on its own.
2018-07-11 21:08:07 -05:00
Scott Lahteine
6b521b6df2 Loosen thermistor table size limit
Co-Authored-By: Aaron Griffith <aargri@gmail.com>
2018-07-11 21:08:07 -05:00
Scott Lahteine
63f4c9bdb9 Followup to float maths patch 2018-07-06 21:34:09 -05:00
Scott Lahteine
2992112da0 Optimize delta kinematics
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-07-04 22:28:56 -05:00
etagle
1367df2875 Replace double with float, optimize calculation 2018-07-04 22:28:56 -05:00
Scott Lahteine
68e6650df7 Remove Quake Fast Inverse SQRT (it isn't faster) 2018-07-04 22:22:10 -05:00
Scott Lahteine
9c058091e9 No M914 or SGT set for non-sensorless axes 2018-07-03 20:09:13 -05:00
Scott Lahteine
568cfe7caa Add thermistor 501 (100K Zonestar) 2018-07-03 17:52:06 -05:00
Scott Lahteine
c51e27d11d
Do a hard kill for failed homing moves (#11161) 2018-06-30 21:54:07 -05:00
Scott Lahteine
90ba77ea0f Lose the old HOMEAXIS macro 2018-06-30 18:13:13 -05:00
Scott Lahteine
2421f3a47d Detect endstop hits in any direction 2018-06-30 17:27:37 -05:00
Scott Lahteine
8eaac0dab3
Add delta feedrate scaling (#11153) 2018-06-30 13:44:27 -05:00
Scott Lahteine
bd7f5848f1
Remove JUNCTION_DEVIATION_INCLUDE_E option (#11147) 2018-06-29 22:42:05 -05:00
Scott Lahteine
42f9921482 Ignore Z min endstop with separate Z-probe
To allow for the case where a Z endstop (e.g., hall effect) is higher than the probe trigger point, don't check the Z min endstop during probe moves. See #11134
2018-06-28 05:06:11 -05:00
Scott Lahteine
aa4cd2e861 Eliminate stepper.* signed/unsigned warnings 2018-06-27 23:10:51 -05:00
Eduardo José Tagle
edb21f349a Fix stepper/planner block handling, race conditions (#11098)
- Allow planner to alter the deceleration phase of the currently executing block.
- Remove BUSY flag, as it is NON ATOMIC to set bits in the Stepper ISR and Planner at the same time.
2018-06-27 18:11:16 -05:00
Scott Lahteine
4d3a9930c5 Match ASM comment spacing to 1.1.x 2018-06-27 17:26:48 -05:00
Scott Lahteine
053438a3aa
Poll all endstops, even when stationary (#11123) 2018-06-27 04:18:57 -04:00
Andy Shaw
3b3029c4bf Make max_e_jerk an array to reduce CPU usage (#11118) 2018-06-26 22:38:31 -04:00
Giuliano
8d8f257384 [2.0.x] Fix advanced pause init values (#11095)
Fixed for cycle used to initialize default values
2018-06-26 14:37:52 -04:00
etagle
5b49fccf80 Add stepper driver DIR delay configuration option
...and recommended pulse width configuration for A4988
2018-06-26 13:28:04 -05:00
etagle
fb4e0b105b Fix endstops compilation error 2018-06-25 12:10:17 -04:00
Eduardo José Tagle
48a15d1c7e [2.0.x] Fix stepper/planner race condition and Stepper pulse timer (#11081)
* Planner: Removal of some race conditions between Stepper ISR and Planner, some of them pointed out by @AnHardt, some of my own findings
* Fixing timing on stepper pulses adding a compensation for the non-null time required to set ports.
2018-06-22 09:15:37 -05:00
Scott Lahteine
50b6204079 Fix LIN_ADVANCE max_e_jerk_factor
According to https://github.com/MarlinFirmware/Marlin/issues/9917#issuecomment-399204568
2018-06-21 22:02:34 -04:00
Scott Lahteine
99591dc20c
Filter endstops state at all times (#11066) 2018-06-21 20:14:16 -05:00
Scott Lahteine
7406f04029 Use MAX (not max) in stepper.h 2018-06-19 20:51:07 -05:00
Scott Lahteine
da94e0bd27 Unsigned eeprom mesh addresses 2018-06-15 15:51:57 -05:00
Scott Lahteine
4c8d6df13c
Extra insurance against endstop false positives (#11013) 2018-06-13 01:22:02 -05:00
Scott Lahteine
81edbfa665
Merge pull request #11004 from ejtagle/always_honor_maximum_step_rate
[2.0.x] Fix stepper pulse minimum period and timing calculations
2018-06-12 22:17:22 -05:00
Scott Lahteine
f3fed52348 Fix coolstep_min_speed / sensorless homing
Fix #8890
2018-06-12 22:12:46 -05:00
etagle
a215725df6 Fix stepper pulse timing
Always honor minimum period on stepper pulse generation, and fix timing calculations

Signed-off-by: etagle <ejtagle@hotmail.com>
2018-06-12 21:34:24 -05:00
Scott Lahteine
0d79128c8d Localize stepper-specific defines 2018-06-12 21:16:54 -05:00
Scott Lahteine
4dbec774b5 HAL_*_TIMER_RATE => *_TIMER_RATE 2018-06-12 16:39:12 -05:00
Scott Lahteine
9d04f47d98 Improvements for junction_deviation_mm
- Drop `max_jerk` with `JUNCTION_DEVIATION`
- Add `max_e_jerk_factor` for use by `LIN_ADVANCE`
- Recalculate `max_e_jerk_factor` when `junction_deviation_mm` changes
- Fix LCD editing of `junction_deviation_mm`
2018-06-11 22:05:16 -05:00
Scott Lahteine
f2c3b0d476 Use bit flags for homed/known 2018-06-11 22:05:16 -05:00
Scott Lahteine
43bdd0bfe4 Fix indent in stepper.h 2018-06-11 19:17:46 -05:00
Scott Lahteine
3fd1f32b73 Fix ADC key and chamber temp 2018-06-10 20:11:40 -05:00
Scott Lahteine
a2f521d34b
Add Junction Deviation mm runtime setting (#10990) 2018-06-10 18:02:54 -05:00
etagle
6f14bcaa3e Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping
The timing value should be properly set for ALL boards. The compiler will check and set maximum step rate calculations based on those values.
2018-06-10 16:02:47 -05:00
etagle
39a7e7720d Adaptive multiaxis step smoothing
- Stepper bugs fixed
- Support MIXING_EXTRUDER with Linear Advance
- Miscellaneous cleanup
2018-06-10 16:02:47 -05:00
Giuliano
b64cc9329e [2.0.x] Fix dual enstop home (#10980) 2018-06-10 02:08:47 -05:00
Scott Lahteine
3701869e6c Add HAL_timer_start for AVR, use stepper timer to time pulses 2018-06-09 22:30:13 -05:00