bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
7,736 Commits 1 Branch 4 Tags 151 MiB
68ae7c8d7a
Commit Graph

1956 Commits

Author SHA1 Message Date
Markus Towara
68ae7c8d7a Bugfix PRINTER_EVENT_LEDS 
Extra closing curly bracket terminates while loop early if PRINTER_EVENT_LEDS defined
 2017-05-12 12:13:23 +02:00
oldmcg
91841d75c9 UBL_DELTA (#6695) 
UBL on Delta's....     Should be close!    Should not affect any Cartesian printer.
 2017-05-11 22:33:47 -05:00
Brian
ae676490c9 M421: Add 'adjust closest point' capability 
- Split M421 into separate versions for bilinear and ubl
- Fix minor issue in G26
 2017-05-11 12:10:38 -04:00
Scott Lahteine
9a688d1456 Merge pull request #6682 from thinkyhead/bf_M80_s_arg 
"M80 S" to report the state of the PSU pin
 2017-05-10 20:29:01 -05:00
Roxy-3D
b63e82f309 M421 Mesh Point Offset and misc. UBL clean up (#6685) 
* M421 Mesh Point Offset and misc. UBL clean up

Allow M421 to accept an offset as well as absolute value for a specified
mesh point.
And misc. UBL clean up to reduce redundent code.

* Better error checking for M421

* Fix M421 Y index bug

I just noticed....  We've had a Y index bug for who knows how long?
 2017-05-10 18:54:10 -05:00
Pablo Ventura
539e0c2f31 "M80 S" to report the state of the PSU pin 2017-05-10 17:58:58 -05:00
Scott Lahteine
081bf1f879 Patch #else / #endif comments 2017-05-09 12:37:23 -05:00
Scott Lahteine
8d961b51cc Eliminate M100 compiler warnings? 2017-05-09 11:32:15 -05:00
Scott Lahteine
911a87e006 Disable SCARA feedrate scaling by default 2017-05-08 14:41:03 -05:00
Scott Lahteine
71396f77d3 Cleanups following recent commits 2017-05-08 14:23:01 -05:00
Scott Lahteine
a6dafb058e Small reduction in error code size 2017-05-08 13:58:09 -05:00
Scott Lahteine
a1e04942a2 Cleanup to software PWM variables 2017-05-08 13:51:45 -05:00
Brian
6cb0fa4128 Cleanup previous implementation of new quiet probing 
Saves a few lines of code.
 2017-05-08 08:13:46 -04:00
Scott Lahteine
56ca47ab9d Patch configuration temp units 2017-05-07 21:32:01 -05:00
bgort
d35e2fda10 Merge pull request #6622 from bgort/silentprobing 
Improve BLTOUCH_HEATERS_OFF functionality
 2017-05-07 21:33:44 -04:00
Roxy-3D
d92fa40c62 misc. UBL fixes (#6631) 
* Restore LSF functionality

Some of the typo's persisted...   Hopefully this gets them all fixed.

* Restore user's expectations of how G28 should behave

* Allow Nozzle size control with ornery host programs
 2017-05-07 18:23:48 -05:00
Brian
faa270071d Improve BLTOUCH_HEATERS_OFF functionality 
- rename to PROBING_HEATERS_OFF
 - move heater pausing functionality into thermalManager
   - add variables, pause(), ispaused(), other functions
 - add fan pausing functionality -> PROBING_FANS_OFF
 - add probing_pause() wrapper
 - move pausing into do_homing_move() and do_probe_move() to minimize quiet time and so other probe types can benefit
 - example configs
 2017-05-07 16:22:08 -04:00
Scott Lahteine
ce507deb9f Support temperature units in M503 2017-05-06 20:24:51 -05:00
bgort
a59066bca9 Various improvements - mostly UBL-related (#6607) 
UBL Clean up.
 2017-05-06 18:59:16 -05:00
Scott Lahteine
6876e79d42 Tweak command index increment 2017-05-05 13:32:31 -05:00
Max Matveev
267f3a03d9 Fixed USE_CONTROLLER_FAN #define usage 2017-05-04 23:38:29 +02:00
bgort
ae7c602031 fix error in M105 output -- use SERIAL_PROTOCOL for ints instead of SERIAL_PROTOCOL_F (#6584) 
also removed wayward 'address of' ampersand in setTargetHotend and setTargetBed parameters
 2017-05-04 16:09:45 -05:00
Florian Heilmann
15268770f5 Fix broken fwretract recovery extruder feedrate 
When both lowering and recovery are performed using the same "prepare_move_to_destination()" the extruder recovery feedrate ends up being ignored and, instead, is only capped by either the maximum e-speed or the time it takes to perform the z-lowering. 
Performing the two moves separately from each other ensures a correct recovery feedrate.
 2017-05-04 11:34:28 +02:00
Scott Lahteine
58210c3a19 Merge pull request #6568 from thinkyhead/rc_bilinear_extension 
Add EXTRAPOLATE_BEYOND_GRID option to bilinear leveling
 2017-05-04 00:46:05 -05:00
Scott Lahteine
da08e11acd Add EXTRAPOLATE_BEYOND_GRID option to bilinear leveling 2017-05-04 00:19:07 -05:00
Scott Lahteine
1196e3ca59 SDCard print completion can use "M0" 2017-05-03 22:24:03 -05:00
Scott Lahteine
6854f08d22 Shut down autotemp in disable_all_heaters 2017-05-03 20:54:26 -05:00
Scott Lahteine
e1b85ff67b Merge pull request #6559 from thinkyhead/rc_more_optimal 
Compact smart_fill_mesh slightly
 2017-05-03 19:07:36 -05:00
Scott Lahteine
2658cc707a Treat temperature as integer, when possible 2017-05-03 17:27:25 -05:00
Scott Lahteine
1b2c7ec20a Make G26 compatible with inches and thermal unit modes 2017-05-03 17:12:48 -05:00
Scott Lahteine
241bdffe65 Dress up Bilinear Leveling code 2017-05-03 17:12:35 -05:00
Scott Lahteine
67ecf06cc4 Patch issue in gcode_M900 
Noted in #6550
 2017-05-03 15:26:00 -05:00
Scott Lahteine
628391304f Merge pull request #6552 from thinkyhead/rc_more_ubl_cleanup 
Further cleanup of UBL
 2017-05-02 22:46:04 -05:00
Scott Lahteine
902fe76db9 Merge pull request #6556 from thinkyhead/rc_use_controller_fan 
Implement USE_CONTROLLER_FAN as a feature
 2017-05-02 22:43:26 -05:00
Scott Lahteine
7ba7474a73 Drop extra parens from address-of operator 2017-05-02 22:22:23 -05:00
Scott Lahteine
fc857c5b78 Merge pull request #6549 from thinkyhead/rc_bltouch_refix 
Fix BLTOUCH_HEATERS_OFF bug
 2017-05-02 21:53:09 -05:00
Scott Lahteine
2c13922c46 Implement USE_CONTROLLER_FAN as a feature 2017-05-02 20:18:52 -05:00
Scott Lahteine
492bc536bf Modify debug methods to take PSTR 2017-05-02 17:53:40 -05:00
Brian
ff5fed137f Fix BLTOUCH_HEATERS_OFF bug 2017-05-02 15:53:52 -05:00
LVD-AC
da2abad636 Various cleanups of G33 
- update comment section
- redefined P5 grid
- minor clean to probe radius routine
- updated EEPROM version to V37 according remark in #6517
 2017-05-02 15:47:06 -05:00
Scott Lahteine
e79b335367 Patches for leveling reactivation in G28 / M48 2017-05-01 17:38:57 -05:00
Scott Lahteine
7d5cd7e0d7 Tweak set_bed_leveling_enabled 2017-05-01 16:46:52 -05:00
Scott Lahteine
ed81e9b3d3 Adjust leveling conditionals 2017-05-01 16:46:48 -05:00
Scott Lahteine
a64e5659ce Clean up G26 external references, private vars 2017-05-01 15:17:52 -05:00
Scott Lahteine
2887c20788 Add a function to home all axes (i.e., gcode_G28) 2017-05-01 15:03:37 -05:00
Scott Lahteine
4f74c416a4 Patch for BLTOUCH_HEATERS_OFF 2017-05-01 11:13:40 -05:00
Scott Lahteine
d814e468d2 Fix set_heaters_for_bltouch and usage 
- Only call `set_heaters_for_bltouch` when actually deploying/stowing
- Clear `next_emi_protection` when re-enabling heaters
 2017-05-01 02:27:52 -05:00
Brian
4e1448e75a Various fixes for compiler warnings 
add BLTouch-related messages in english and (rusty) french;
add missing endstops.h in ultralcd.cpp;
fix misc. compiler warnings;
fix lsf_reset - ZERO macro can't handle a pointer as it would only memset the size of the pointer, not the size of the entire struct
 2017-05-01 02:12:40 -05:00
Scott Lahteine
671a44b8aa Merge pull request #6410 from teemuatlut/LVD-Delta 
Delta auto-calibration updates
 2017-04-30 16:39:51 -05:00
LVD-AC
cafc48dff8 little oops 2017-04-30 22:17:49 +03:00