143b2896e0
Add M412 to enable/disable filament runout detection ( #12406 )
2018-11-12 21:29:46 -06:00
a163c89c6a
Followup to 50af1d1
2018-11-12 20:31:53 -06:00
be6271767f
Fix BABYSTEP_ZPROBE_OFFSET ( #12408 )
...
Fix #12399
Did not compile without `WATCH_HOTENDS || WATCH_THE_BED`.
Add condition to include "../../module/temperature.h".
2018-11-12 17:44:21 -06:00
50af1d1e08
Differentiate translated On/Off from Serial ON/OFF
2018-11-12 17:23:08 -06:00
df907a905f
Update UBL comments for debug change
2018-11-12 03:46:48 -06:00
da17f8ad37
For now (!) don't synchronize in M204 and M205
...
See if this has any deleterious effect on motion planning by slicers that inser their own jerk and acceleration controls. The problem I see is that these settings can take effect on blocks already in the planner, and the only way around this would be to shadow these settings in planner blocks and use the shadowed settings in the planner.
2018-11-12 02:43:24 -06:00
a3923424c7
Clean up LCD width/height determination
2018-11-12 02:37:40 -06:00
a0c795b097
Encapsulate common display code in a singleton ( #12395 )
...
* Encapsulate common LCD code in a singleton
* Depend more UBL code on UBL_DEVEL_DEBUGGING
- Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 12:16:24 -06:00
9da6809ac3
Adjust some comment spacing
2018-11-11 11:28:50 -06:00
471f403a67
Reduce code size with plain inlines
2018-11-11 08:36:10 -06:00
30a49f5ee2
Apply extra condition to LCD_PROGRESS_BAR
2018-11-11 08:36:10 -06:00
4e0c935959
Update HAL and libs formatting
2018-11-10 19:43:23 -06:00
47483e8c17
Update Raptor config
2018-11-10 19:42:46 -06:00
6093df11dc
Allow G26 to use the active extruder ( #12387 )
...
* Make lcd_quick_feedback argument optional
* Add click_to_cancel option to wait_for_hotend/bed
* Have G26 use the active nozzle and wait_for_hotend/bed
* Use wait_for_release in UBL G29
* Add 'T' parameter to G26 for an initial tool-change
2018-11-10 18:07:38 -06:00
4260282df7
Tevo Little Monster example configuration ( #12370 )
2018-11-10 03:36:01 -06:00
bed15fcd81
Tweak 'echo_not_entered' used by MBL's G29
2018-11-10 01:32:51 -06:00
c239131ff5
Use 'serial_spaces' in 'print_2d_array'
2018-11-10 01:32:51 -06:00
56150ec030
Add reference comments to MeshLevelingState
2018-11-09 21:31:20 -06:00
24c5e57bb6
Update German language ( #12379 )
2018-11-09 15:25:29 -06:00
fd7fd55662
Solve endstops issues ( #12382 )
...
- Partially reverts #11900 and tries to solve #12336
2018-11-09 14:58:04 -06:00
78ccedd6a8
Fix M91x sanity-check to permit TMC2660
...
Fix #12362
2018-11-09 05:48:15 -06:00
b60abc7c37
[2.0.x] Macro G-codes ( #9365 )
2018-11-09 05:25:08 -06:00
ccdbf20f60
Update Italian language ( #12368 )
2018-11-09 04:04:02 -06:00
d08847b1a6
Update Slovak translation ( #12376 )
2018-11-09 04:03:07 -06:00
7665dff58b
No error on T0 with single-extruder and fix MIXING_EXTRUDER virtual tools ( #12375 )
2018-11-09 00:15:07 -06:00
4ed6397e5d
More comprehensive NO_LCD_MENUS ( #12367 )
2018-11-09 00:07:16 -06:00
9c8f083d6c
Extend pins errors to include the processor
2018-11-08 22:25:59 -06:00
525ea554a1
Remove obsolete comments
2018-11-08 10:55:18 -06:00
ef724edd80
Apply HAS_LCD_MENU in EEPROM code
2018-11-08 10:03:05 -06:00
b169320a03
Clean trailing whitespace
2018-11-07 02:40:18 -06:00
81b1e9d272
Fix up xdiff, ydiff, zdiff in tool change
...
Followup to #12137
2018-11-06 22:56:33 -06:00
6471a75a22
Combine more tool-change variables ( #12137 )
2018-11-06 22:22:20 -06:00
147e270208
Restore GTM32_PRO_VB temp and heater pins
...
Undo #12345
2018-11-06 21:41:30 -06:00
8def25e475
Set CUSTOM_MACHINE_NAME for some configs
2018-11-06 21:41:30 -06:00
812f6a7dd7
Fix Resume from SD Pause
...
In reference to https://github.com/MarlinFirmware/Marlin/pull/12098#issuecomment-436231690
2018-11-06 21:09:37 -06:00
4f72e041f2
Use card.stopSDPrint() for completeness
2018-11-06 20:55:17 -06:00
488a17b3f5
Use IS_SD_PRINTING() more
2018-11-06 20:55:17 -06:00
4dbaa6369f
Fix const pointer assignment compile error ( #12350 )
2018-11-06 19:49:39 -06:00
959ed32636
Update Italian language ( #12352 )
2018-11-06 19:30:24 -06:00
812bfec65e
Update Slovak translation ( #12354 )
2018-11-06 19:29:28 -06:00
1624722566
Update German translation ( #12355 )
2018-11-06 19:28:40 -06:00
e574f01568
More advanced pause tweaks ( #12356 )
...
* Followup to LCD_TIMEOUT_TO_STATUS=0
* Make continuous purge screen fit 20x4
* Unify purge message modes
* Preserve last-set pause header mode
2018-11-06 19:25:57 -06:00
5a470d4a49
Apply some tool-change cleanup
2018-11-06 18:20:01 -06:00
34ea458667
Fixed advanced pause messages ( #12353 )
2018-11-06 15:27:19 -06:00
4c5ca89d8c
Show the appropriate pause message ( #12348 )
2018-11-06 04:13:48 -06:00
8517d5f915
LCD menu code refactoring and cleanup ( #12308 )
2018-11-05 22:51:10 -06:00
b3b4e6dc45
Change Marlin debug flag names to fix conflicts ( #12340 )
...
In reference to #11000
2018-11-05 22:48:28 -06:00
f7e682eeee
Update Italian language ( #12344 )
2018-11-05 22:46:59 -06:00
a813900fce
Add Geeetech Rostock 301 config, update GTM32 Pro VB pins ( #12345 )
2018-11-05 22:42:06 -06:00
04f173790f
Remove trailing whitespace
2018-11-05 22:38:20 -06:00
