1718eff54a
Code changes supporting up to 6 extruders
2018-09-16 22:32:53 -05:00
c437bb08f1
Overhaul of the planner ( #11578 )
...
- Move FWRETRACT to the planner
- Combine leveling, skew, etc. in a single modifier method
- Have kinematic and non-kinematic moves call one planner method
2018-09-16 21:24:15 -05:00
1a6f2b29b8
Add support for Triple-Z steppers/endstops
2018-09-16 00:35:58 -05:00
215eee4fe5
Use 'friend' to access set_directions
2018-09-15 20:11:10 -05:00
ff51e7322d
Fix for Stepper::set_directions() compilation error ( #11838 )
2018-09-15 19:31:51 -05:00
809b232fa2
Fix stepper directions after M501/M502
...
See https://github.com/MarlinFirmware/Marlin/issues/11103#issuecomment-421387611
Co-Authored-By: tcm0116 <tcm0116@users.noreply.github.com >
2018-09-14 20:00:55 -05:00
4fb2134f00
Fix non-sensical values for Zonestar themistor table ( #11817 )
...
Values taken from Zonestar firmware for P802QA with a Melzi board. Timestamps from the firmware package are from April 2016.
2018-09-12 15:36:04 -05:00
b220a825a7
Fix raw_filwidth_value error
2018-09-12 04:31:55 -05:00
8584d3697d
Fix servo count define conflict
...
`MAX_SERVOS` => `NUM_SERVO_PLUGS`
2018-09-11 16:20:31 -05:00
d882717d98
Save some PROGMEM with constexpr ( #11798 )
...
When possible, make `active_extruder` a `constexpr` to save some PROGMEM.
2018-09-10 23:09:26 -05:00
4f883d5971
[2.0.x] Extruder-Distinct Linear Advance K Factors ( #11789 )
2018-09-10 22:37:32 -05:00
1b6bc19427
Add external closed loop controller support
2018-09-10 03:17:17 -05:00
7e8c073fba
Fix extruder stops extruding with LA ( #11758 )
2018-09-09 00:04:14 -05:00
0c01099f17
hop_amount => current_hop
2018-09-08 21:20:37 -05:00
e25d2ae4a2
[2.0.x] SWITCHING_TOOLHEAD ( #11623 )
2018-09-08 01:43:24 -05:00
dcfde2317f
Pass segment length in prepare_kinematic_move_to ( #11737 )
2018-09-06 01:40:22 -05:00
530a13ab6c
[2.0.x] SECURITYFIX missing max temp error when PID is used ( #11717 )
2018-09-05 01:41:45 -05:00
72fdb6bab3
Fix SWITCHING_NOZZLE zdiff ( #11683 )
2018-09-03 23:24:40 -05:00
d1ceaf5550
[2.0.x] Followup to IDEX changes ( #11707 )
2018-09-03 23:15:31 -05:00
8e18e48d49
Merge pull request #11610 from Freeviv/bugfix-2.0.x
...
[2.0.x] Editable servo angles
2018-09-03 03:55:38 -05:00
59e76e5fdf
[2.0.x] Fix planner computation ( #11708 )
...
Fix #11697
2018-09-03 00:29:29 -05:00
7680b64aa6
IDEX clean up ( #11690 )
2018-09-02 10:18:59 -05:00
49e107cea9
Restrict SW serial to AVR ( #11696 )
2018-09-01 15:24:44 -05:00
d55f44edba
Printcounter improvements ( #11689 )
2018-08-31 17:40:39 -05:00
ada85d5585
Improve HOTEND OFFSET Z display precision to 3 ( #11686 )
2018-08-31 15:15:40 -05:00
3e81745e81
Fix issues, make optional
2018-08-29 17:58:02 -05:00
aa80e448e2
Store servo angles in EEPROM
2018-08-29 17:58:02 -05:00
6dc9553aa5
Fix SWITCHING_NOZZLE compile error ( #11657 )
2018-08-27 21:25:25 -05:00
d1c9517903
Followup to hotend_offset[Z] patch
2018-08-24 21:32:00 -05:00
e2b8fc4f17
Reduce some debug strings
2018-08-24 21:11:39 -05:00
acf5ae3083
!ENABLED => DISABLED
2018-08-24 16:36:37 -05:00
6483285bc5
HOTEND_OFFSET_Z always available ( #11603 )
2018-08-22 00:21:29 -05:00
f0dbe61692
Tweaks to motion.h reachable tests
2018-08-21 23:34:29 -05:00
cd9868f442
Make position_is_reachable() smarter about IDEX machines`
...
On many IDEX machines the allowed travel of the X1 carraige and X2 carraige does not perfectly overlap.
This helps the issue. But more work needs to be done at the higher level. (For example the X1_MAX_POS should probably be factored into G26's mesh validation pattern.)
2018-08-21 19:12:26 -05:00
ad12b9b46b
Fix indentation, whitespace, spelling, formbot pins...
2018-08-21 09:47:57 -05:00
db30650731
Fix UBL/Homing ( #11566 )
2018-08-16 08:28:40 -05:00
9de730b2bf
Update tool_change.cpp ( #11559 )
2018-08-15 19:30:52 -05:00
1561e61df7
New TMC2208 constructor
...
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi >
2018-08-14 18:41:51 -05:00
b37bfeffeb
[2.0.x] Use the new const functions of the persistentStore api ( #11544 )
2018-08-14 18:35:36 -05:00
c64199941e
Compile only selected PIO environment ( #11519 )
2018-08-14 03:28:52 -05:00
6964e1a95a
Clean up trailing whitespace
2018-08-14 00:55:37 -05:00
a4b0148365
Easier to find 'static inline'
2018-08-13 23:55:33 -05:00
577aeb4aa9
All EEPROM access uses persistentStore
2018-08-13 17:43:35 -05:00
6a8b906318
Followup for persistent_store_api.h
2018-08-13 17:43:35 -05:00
66d2b48b59
Update PersistentStore api ( #11538 )
...
- Clean up the API to use a `static` class instance to adhere to Marlin convention
- Add `const` position data access for read/write
- Add Storage capacity to the interface
2018-08-13 17:30:25 -05:00
f1347f783d
Optimize thermistor table 71
...
agData in Table 71 is extremely oversampled (see Issue #11220 ). I have removed the data points that perform *worse* than linearly interpolating the remaining points, and fixed up two points that were simply rounded incorrectly.
Co-Authored-By: Aaron Griffith <aargri@gmail.com >
2018-08-13 02:54:55 -05:00
c93538e9f3
UBL/planner patch tweaks
2018-08-11 22:50:45 -05:00
fc55f1da01
Account for UBL correction when setting the planner position ( #11486 )
2018-08-10 13:00:50 -05:00
e85feb2545
[2.0.x] Better timing handling ( #11461 )
2018-08-06 23:13:36 -05:00
79835590e3
Easier to disable homing validation ( #11458 )
2018-08-06 23:11:37 -05:00
