bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
11,446 Commits 1 Branch 4 Tags 151 MiB
5b1d52671c
Commit Graph

9645 Commits

Author SHA1 Message Date
Hannes Brandstätter-Müller
96bbda5d48 remove confusing comment (#12120) 2018-10-17 02:47:03 -05:00
Marcio Teixeira
f98f4ac7ea Fix and improve EXTENSIBLE_UI (#12117) 
- Add methods to access print counter data
- Clean up some inconsistent method names
- Clear lcd status after filament change
- Implement `lcd_reset_status` so it works like UltraLCD
 2018-10-16 16:58:29 -05:00
Scott Lahteine
8bf596bd4c RETRACT_ZLIFT => RETRACT_ZRAISE 2018-10-16 16:46:40 -05:00
Marcio Teixeira
056561df93 [2.0.x] Enhancements to FILAMENT_RUNOUT_SENSOR (#12069) 
- Added FILAMENT_RUNOUT_DISTANCE_MM option
- Added FILAMENT_MOTION_SENSOR option
 2018-10-16 07:28:52 -05:00
Scott Lahteine
cce4931342 Clean up recent contribs 2018-10-16 06:45:44 -05:00
Karl Andersson
8b5e51c9aa STM32F4xx modifications for HAL_STM32 (#12080) 2018-10-16 06:42:41 -05:00
Scott Lahteine
bf0c809ff2 Update M165 comment 2018-10-16 06:10:27 -05:00
AnHardt
9ac9649183 Mixer - update descriptions (#12108) 2018-10-16 06:09:02 -05:00
Scott Lahteine
9bf5d4331c Clear up some compiler warnings 2018-10-16 05:47:02 -05:00
Scott Lahteine
0139762a96 Fix a sanity check 2018-10-16 05:46:33 -05:00
Scott Lahteine
2ecb124e42 Fix trailing whitespace 2018-10-16 03:50:16 -05:00
AnHardt
f56968ba0b New Continuous Filament Mixer (#12098) 2018-10-16 03:38:57 -05:00
Ludy
2d2cd628c6 Update German language (#12094) 2018-10-16 02:59:04 -05:00
Scott Lahteine
84b59d58fb Clean up whitespace 2018-10-16 02:02:20 -05:00
swilkens
06e2afe8e0 [2.0.x] Reduce HOMING_FEEDRATE_XY for Ender 3 (#12105) 
Homing on the Ender 3 with HOMING_FEEDRATE_XY set to 50*60 was shown (#12074) to cause the end-stop micro-switches to bottom out, causing the carriage for both X and Y axis to physically crash into the micro switch. Reducing the homing speed prevents the switches from bottoming out.
 2018-10-16 01:51:47 -05:00
TheSFReader
af939c158a Option for G0 to have a separate feedrate (#12089) 2018-10-16 01:49:51 -05:00
Christopher Pepper
e5b4bf22d4 Remove debug output from flash persistent store implementation 2018-10-14 18:43:48 +01:00
Christopher Pepper
42fb7c14b0 Update the sdcard usb sharing config and apply to Re-ARM 2018-10-14 18:43:48 +01:00
Christopher Pepper
254b68fe2c servo update 2018-10-14 18:43:48 +01:00
Andy Shaw
870bfd08f5 usb and sdcard sharing improvements 
* Add traceback after watchdog timeout

Add the cpability to perform a traceback following a watchdog timeout.

* Enhanced hardware SPI

Allow use of either SSP0 or SSP1.
Ensure that no data is left in I/O buffers after calls to enable sharing of SSP hardware.

* Make flash emulation of eeprom the default

Make use of flash for eeprom storage the default. This means that usage of eeprom will not cause USB drive mount/unmount operations.

* Allow sharing of SD card

SD card I/O operations from the USB stack take place in idle loop, rather than at interrupt time. Allowing sharing of the SPI bus.

New configuration options to allow usage of the SD card to be specified.

* Fix problem with hardware SPI pins
 2018-10-14 18:43:48 +01:00
Christopher Pepper
5ddf52d58e [HAL][LPC176x] Pull out framework into separate repository 
Framework and build platform now located at https://github.com/p3p/pio-framework-arduino-lpc176x and https://github.com/p3p/pio-nxplpc-arduino-lpc176x respectively

fix mkssbase leds

move hardware serial

remove hardware/software serial

Hardware Serial extraction

HardwareSerial ISRs

fix disabled serial2 causing Serial object to link

move usb devices out to framework

separate out adc/pwm peripheral function from hal.cpp

fix includes

remove unused pwm init

move adc

HAL header update

templated filtered adc

LPC1769 platform
 2018-10-14 18:43:48 +01:00
Roman Moravčík
213e94bce2 [2.0.x] Updated slovak translation (#12059) 2018-10-14 02:15:15 -05:00
Karl Andersson
a40458405a Fix datasize error when FWRETRACT is disabled (#12086) 2018-10-14 02:14:34 -05:00
Scott Lahteine
951b25163e
Extend M217 with configurable park/raise (#12076) 2018-10-13 23:08:20 -05:00
Kevin Velickovic
ea13a77dcb Fixed Z-Probes NO/NC for Anycubic Kossel (#12083) 2018-10-13 20:34:56 -05:00
N95JPL
ab9d5eb38d Add Bootscreen Animation (#12077) 2018-10-12 22:11:20 -05:00
Scott Lahteine
26208a5c2f Clean up some boot screens 2018-10-12 18:56:39 -05:00
Scott Lahteine
9b6be0ae0f Fix lite status screen SD % 2018-10-12 17:02:59 -05:00
Scott Lahteine
af3bf6c956 Tweak config spacing 2018-10-12 16:09:27 -05:00
Scott Lahteine
a44ef27897 Outdent singlenozzle toolchange code 2018-10-12 15:19:03 -05:00
Scott Lahteine
d338e4d875 Fix singlenozzle toolchange cold extrusion test 2018-10-12 15:15:25 -05:00
Roxy-3D
25b980dddb
Remove erroneous Pin 12 definition 
There is no switchable Power Supply.   Don't put it on Pin 12.   
(Pin 12 is actually FAN1)
 2018-10-12 13:45:04 -05:00
Scott Lahteine
ddaef1a60c Clean trailing whitespace 2018-10-11 21:40:55 -05:00
Scott Lahteine
1407afad73 Move SENSITIVE_PINS to its own file 2018-10-11 01:10:11 -05:00
Scott Lahteine
45e738876a Add stepper MS3 support 
Co-Authored-By: TheLongAndOnly <thelongandonly@users.noreply.github.com>
 2018-10-11 01:10:11 -05:00
Giuliano Zaro
d43d4e4219 Refactor PRINTER_EVENT_LEDS, apply to M303 (#12038) 
Co-Authored-By: Giuliano Zaro <gmagician@users.noreply.github.com>
 2018-10-10 21:25:43 -05:00
Giuliano Zaro
d8d76cd2ba [2.0.x] Italian language update (#12060) 2018-10-10 20:13:10 -05:00
Scott Lahteine
e8d2cf4fb5 EEPROM followup (tmc_stepper_current_t) 2018-10-10 17:25:45 -05:00
Scott Lahteine
50cbca4c55 Hide some menu items when busy 2018-10-10 17:18:33 -05:00
InsanityAutomation
3cb5517ddb Make singlenozzle tool-change honor no_move (#12056) 
...Set no move earlier so it applies
 2018-10-10 16:49:59 -05:00
InsanityAutomation
d332fcb8fa Fix firmware-retract compile errors (#12061) 2018-10-10 16:46:08 -05:00
Scott Lahteine
43940d59ed Fix trailing spaces 2018-10-10 16:24:35 -05:00
InsanityAutomation
b2c1cd7eda Allow cold change of active extruder (#12055) 
Followup to #11994
 2018-10-10 09:57:48 -05:00
Scott Lahteine
d556dc1865
Fix and improve EEPROM storage (#12054) 
* Clean up Temperature PID
* Improve EEPROM read/write/validate
* Group `SINGLENOZZLE` saved settings
* Group planner saved settings
* Group filament change saved settings
* Group skew saved settings
* Group `FWRETRACT` saved settings
 2018-10-10 09:45:20 -05:00
Scott Lahteine
9b5c1a5e77 Fix EEPROM checksum bug 
Addressing #12048
 2018-10-10 06:14:58 -05:00
Scott Lahteine
272d4a5167 Apply #pragma once 2018-10-10 02:57:01 -05:00
Scott Lahteine
07d33849b0 Fix unused var warning, apply ENABLED 2018-10-09 21:31:28 -05:00
Hannes Brandstätter-Müller
a3e8cb1e44 [2.0.x] Ender-4 small improvements in Configuration (#11843) 2018-10-09 20:58:22 -05:00
Scott Lahteine
cf5284cdf2
Add SD Firmware Update capability (#12043) 
Co-Authored-By: timoxd7 <timoxd7@users.noreply.github.com>
 2018-10-09 20:00:47 -05:00
Scott Lahteine
0bd54392b7 Use uint8_t in EEPROM code 2018-10-09 19:00:01 -05:00
Scott Lahteine
ce82015d5f Fix include in G80 2018-10-09 17:24:56 -05:00
Marcio Teixeira
cef1de89d0 Fixed incorrect axis index. (#12051) 2018-10-09 16:59:34 -05:00
Marcio Teixeira
d6d48e63fb Allow #defined TYPE arg to ultralcd menu macros (#12041) 
Previously, it was not possible for the TYPE argument to ultralcd menu macros to itself be a #defined value. This made it difficult to create variables to set many related menu items to a common precision that could be easily changed.
 2018-10-08 20:01:00 -05:00
Emilio Moretti
2ef7175b42 Update Ender-2 BED_MAXTEMP (#12042) 
Also added details to the README to make sure the Ender-2 status is properly documented.
 2018-10-08 19:57:44 -05:00
Scott Lahteine
5f6aabccbe Tweak M48 spacing 2018-10-08 19:11:25 -05:00
Marcio Teixeira
ec9aa4f468 [2.0.x] Miscellaneous fixes (#12039) 
* Allow override of soft SPI pins in `pins_*.h`
* Add default case to avoid compiler warning.
* Additional pin definitions for Archim 2.
* Einsy Retro has same timings as Einsy Rambo.
 2018-10-08 18:14:52 -05:00
Marcio Teixeira
906a24fa81 Extensible user interface API (#11193) 2018-10-08 15:44:05 -05:00
InsanityAutomation
ee253991d4 Various fixups for single-nozzle filament swap (#12036) 2018-10-08 15:39:55 -05:00
Marcio Teixeira
8dbb305e8e Fix "Missing separator" errors. (#12035) 
- Makefiles require tabs (not spaces) before shell commands.
- Other indentation can either be space or tabs.
 2018-10-08 14:28:52 -05:00
Scott Lahteine
55e810d512 Fix G80 compilation 2018-10-08 13:11:36 -05:00
Scott Lahteine
d5017e2788 Add status screen with 4 nozzles 2018-10-08 01:27:21 -05:00
Scott Lahteine
7db0113b53 Improve E_AXIS_N macro 2018-10-07 18:22:05 -05:00
Nils Hasenbanck
191df5e17d Correct PWM_PIN behavior for STM32 HALs (#12027) 2018-10-07 17:08:01 -05:00
Sam Lane
f2ecf8d510 Add option to control Solenoids under PARKING_EXTRUDER (#12028) 2018-10-07 17:07:12 -05:00
InsanityAutomation
74cd6cb4fc Single nozzle filament change (#11994) 2018-10-07 17:06:14 -05:00
Scott Lahteine
bfcf570d68 Try ISR_ALIASOF for Endstop Interrupts 2018-10-07 17:05:32 -05:00
Giuliano Zaro
c0d9058e25 Shorten an Italian menu title (#12034) 
…and change a multi-use "back" menu item.
 2018-10-07 16:43:48 -05:00
teemuatlut
dffb4c63dc [2.0.x] TMC2660 followup (#12029) 
* Don't react to s2g on TMC2660. False positives
* Init with sensorless probing as well
 2018-10-07 15:37:44 -05:00
Scott Lahteine
d6b0fbd771
Use uint8_t for all fan speeds (#12032) 2018-10-07 15:34:41 -05:00
Scott Lahteine
cb7844c8d4
Save PROGMEM on serial prefixes (#12033) 
With default config and `EEPROM_SETTINGS`, saves over 200 bytes of PROGMEM.
 2018-10-07 15:32:15 -05:00
Scott Lahteine
07db08e39d Fix EXTRUDER_AUTO_FAN_SPEED comment 2018-10-06 19:51:17 -05:00
Scott Lahteine
ca0e308105 Fix up some units comments 2018-10-06 19:45:50 -05:00
Scott Lahteine
65b8f3821b Suppress temperature.h compile warning 2018-10-06 19:29:41 -05:00
teemuatlut
c447d75916 Add support for TMC2660 (#11998) 2018-10-06 17:18:10 -05:00
Scott Lahteine
cf0b9eb37c no need to use destination in do_pause_e_move 2018-10-06 16:43:21 -05:00
Scott Lahteine
e8d677620c Use NUM_SERVOS in EEPROM code 
Fix #12015
 2018-10-06 15:11:32 -05:00
Scott Lahteine
0fcdfdeed6 Followup to #12017 2018-10-06 13:23:58 -05:00
Phr3d13
acac2adfc8 Add support for MeCreator2 (#12017) 2018-10-06 12:26:49 -05:00
Thomas Moore
49823a4939 Fix broken jerk handling (#12019) 
Fix #12004
 2018-10-06 12:02:50 -05:00
Scott Lahteine
52a37913c1 Extend and apply some corrections 2018-10-06 00:27:21 -05:00
Scott Lahteine
77b9a41f1f Add G-code extensions to example configs 2018-10-06 00:15:35 -05:00
thesfreader
e09c144674 Add CNC-like G-code options 2018-10-06 00:15:27 -05:00
Scott Lahteine
33056046a3
STM32 non-generic PWM_PIN and USEABLE_HARDWARE_PWM (#12016) 2018-10-06 00:14:12 -05:00
Scott Lahteine
d5141c4e03 Fix up leading/trailing whitespace 2018-10-05 18:19:59 -05:00
Marcio Teixeira
03fc4d31d0 Makefile support for 32-bit Archim board and new TMC library (#11997) 
* Support new TMC library and 32-bit Archim board

- Added IS_MCU flag
  - When IS_MCU flag is 1, AVR compiler will be used
  - When IS_MCU flag is 0, ARM compiler will be used
- Added support for new TMC library
- Added support for a 32-bit Archim board, which could probably be used as a basis for other 32-bit boards.
 2018-10-05 16:06:11 -05:00
Scott Lahteine
65b36642f8 Fix Anycubic Kossel config 2018-10-04 20:27:05 -05:00
Scott Lahteine
fc326b3dde Add USB_FLASH_DRIVE_SUPPORT to examples 
Co-Authored-By: marcio-ao <marcio@alephobjects.com>
 2018-10-04 19:54:12 -05:00
Marcio Teixeira
2067619a26 Add USB_FLASH_DRIVE_SUPPORT 2018-10-04 19:54:12 -05:00
Giuliano Zaro
07fe8d28be [2.0.x] Partial Italian revert (#12008) 
- Use a comma for decimals just in one message has not been a good idea.
- Full comments translation
 2018-10-04 14:38:54 -05:00
Scott Lahteine
517b4f4cd4 Fix lightweight UI hotends display 2018-10-04 14:37:24 -05:00
Giuliano Zaro
72a750e0eb [2.0.x] Update Italian language (#11996) 2018-10-04 03:03:47 -05:00
Scott Lahteine
bb561baf9e Tweak some config comments 2018-10-04 02:42:12 -05:00
Nils Hasenbanck
fcf6d127fd STM32 timer simplification (#11995) 
Prescalers aren't calculated for the given target frequency.
Stepper timer should run at 2 Mhz and temperature timer at 72 Khz.
 2018-10-03 22:33:24 -05:00
Scott Lahteine
8daadd2c8c
Fix TMC_DEBUG undefined report_tmc_status (#11993) 2018-10-03 11:56:49 -05:00
Scott Lahteine
c40ea1f0fd Update EEPROM_VERSION 
And set EEPROM_OFFSET to 0, since the historical 100 skipped bytes are never used.
 2018-10-03 11:34:34 -05:00
Scott Lahteine
1358bd9319 Make MAX_EXTRUDERS always 6 2018-10-03 11:32:19 -05:00
AnoNymous
001f26b642 Template struct simplification for serial (#11990) 2018-10-03 11:01:21 -05:00
Scott Lahteine
348004c34f
STM32F7 HAL using the official STM32 Arduino Core (#11750) 2018-10-03 03:26:07 -05:00
Scott Lahteine
3e58b3a5d4 Followup to #11943 2018-10-03 02:55:10 -05:00
teemuatlut
c3229e1b34 Migrate to a new TMC library (#11943) 2018-10-03 02:48:49 -05:00
brian park
2abf3d258d Korean language translation support (#11987) 2018-10-03 01:53:34 -05:00
Eduardo José Tagle
d6955f25b2 Expand serial support in DUE/AVR hals exploiting the templated MarlinSerial classes (#11988) 2018-10-03 00:47:27 -05:00
Eduardo José Tagle
f6f2246f59 Templatized serial classes (#11982) 2018-10-02 22:15:30 -05:00
Scott Lahteine
ee53f7d813 Revert header reorg. 2018-10-02 22:09:41 -05:00
Scott Lahteine
d619ba2685 Tweak STM32F4 config 2018-10-02 22:03:00 -05:00
LineF
d777cef837 fixed minimum macro (#11986) 2018-10-02 21:35:34 -05:00
Scott Lahteine
e3f7b69105
Add PROBING_STEPPERS_OFF (#11984) 
Co-Authored-By: houseofbugs <houseofbugs@gmail.com>
 2018-10-02 05:13:58 -05:00
Scott Lahteine
0e5bcdf695 Make DISABLE_INACTIVE_EXTRUDER a simple switch 2018-10-02 04:57:03 -05:00
Scott Lahteine
0dedb3e139
Reorganize some core headers (#11983) 2018-10-02 04:25:46 -05:00
Thomas Moore
ab4549d2bc [2.0.x] Add simultaneous retraction for mixing extruder (#11941) 2018-10-01 23:32:02 -05:00
Scott Lahteine
c75f5a376b Tweak some comments 2018-10-01 18:34:14 -05:00
Scott Lahteine
f4c625d3a1 Ensure MIN/MAX overrides 2018-10-01 05:32:55 -05:00
Scott Lahteine
3019713402 Reorganize some enums 2018-10-01 05:32:55 -05:00
Scott Lahteine
606a4362b3 Reduce STM32F4 compile warnings 2018-10-01 04:41:17 -05:00
Scott Lahteine
b3154b2120 Apply MOVE_Z_WHEN_IDLE to example configurations 
Co-Authored-By: dot-bob <gibben@gmail.com>
 2018-10-01 01:41:11 -05:00
dot-bob
b0fd8f2d74 Add option to move Z on double-click when idle 2018-10-01 01:41:11 -05:00
Scott Lahteine
389376c40e Clean up softspi.h 2018-10-01 01:29:48 -05:00
Scott Lahteine
e78bdd654d Clean up BABYSTEP options 2018-10-01 01:29:21 -05:00
InsanityAutomation
8ae113ff36 Show zprobe_zoffset when BABYSTEP_HOTEND_Z_OFFSET is disabled (#11973) 2018-10-01 00:30:10 -05:00
InsanityAutomation
2e98437392 Clean up main menu (#11972) 2018-10-01 00:15:06 -05:00
InsanityAutomation
6d862b2916 Home before level corners, if needed (#11976) 
…and add a consistent homing screen for all LCD pre-homing.
 2018-10-01 00:14:28 -05:00
Scott Lahteine
11ac75edcb
Use PGM_P for PSTR pointers (#11977) 2018-09-30 23:44:33 -05:00
InsanityAutomation
4d5566a6b7 Add filament runout sensor menu item (#11971) 2018-09-30 21:33:46 -05:00
Scott Lahteine
8489673cea Adjust some HAL formatting 2018-09-30 21:24:37 -05:00
Scott Lahteine
fb8a07660a Followup to minmax patch 
Co-Authored-By: Palatis <palatis@gmail.com>
 2018-09-30 21:17:31 -05:00
Scott Lahteine
3c40933713 Remove trailing spaces, old comment 2018-09-30 20:47:06 -05:00
Hannes Brandstätter-Müller
a3ec805c97 Anycubic Kossel Linear+: corrected DELTA_DIAGONAL_ROD (#11964) 2018-09-30 05:41:26 -05:00
AnoNymous
b30ca652ae Replace MIN# / MAX# with variadic MIN / MAX (#11960) 2018-09-30 04:59:14 -05:00
Scott Lahteine
e10f730478 Tweak vector_3::apply_rotation 2018-09-30 01:51:33 -05:00
Scott Lahteine
e2ab78d876 Fix SERIAL_PORT_2 sanity check 2018-09-30 00:24:10 -05:00
AnoNymous
a644d8cb93 Avoid copies in vector and matrix (#11959) 2018-09-29 23:04:40 -05:00
Scott Lahteine
693865a649 Fix some whitespace 2018-09-29 22:36:36 -05:00
Scott Lahteine
9903305dda
Merge pull request #9582 from tcm0116/2.0.x-sensorless_probing 
[2.0.x] Add TMC2130 sensorless probing
 2018-09-29 21:02:22 -05:00
Scott Lahteine
14df753086 Correction for block->mix_steps 
Fix #11484
 2018-09-29 19:13:17 -05:00
Alexander Amelkin
2ecfda80ac Improve support for JTAG/SWD pins reuse (#11963) 
STM32 can reuse JTAG and SWD pins separately. Add `DISABLE_DEBUG` option to disable both interfaces and retain `DISABLE_JTAG` to disable JTAG only.
 2018-09-29 19:00:49 -05:00
Scott Lahteine
bb47009656 Apply sensorless changes to example configs 2018-09-29 18:54:14 -05:00
Thomas Moore
3286325044 Add TMC2130 sensorless probing 2018-09-29 18:54:14 -05:00
Scott Lahteine
7d5c336c56 Corrections for dylsexic TMC 2018-09-29 18:51:11 -05:00
Scott Lahteine
d89d8fe852 Fix Busy State in temperature.cpp 
Fix #11954
 2018-09-29 17:03:35 -05:00
Giuliano Zaro
70e7a465d8 [2.0.x] Fix compile error (#11951) 
Fix compile error intruduced with M109 modification
 2018-09-29 13:48:23 -05:00
Hannes Brandstätter-Müller
935b120949 Anycubic Kossel: probe closer to the edge (#11950) 2018-09-29 02:26:16 -05:00
Scott Lahteine
1410e79e7f Ensure M109 handles autotemp 2018-09-29 02:12:06 -05:00
Scott Lahteine
e4389f7d23
Standard methods to wait for heating (#11949) 2018-09-29 01:44:47 -05:00
Scott Lahteine
bdc9889d3a Fix a sanity check 2018-09-29 00:24:25 -05:00
Scott Lahteine
321f9140d1 Followup to #11904 2018-09-28 20:04:40 -05:00
InsanityAutomation
23114aeb81 Fix garbled M119 output. Honor NUM_RUNOUT_SENSORS (#11948) 2018-09-28 19:00:11 -05:00
Scott Lahteine
1667ed9d1c Pause should use ECHOLNPGM 2018-09-28 18:15:38 -05:00
Victor Tseng
93839e2f73 Add option to enable/disable autoretract altogether (#11904) 2018-09-28 16:52:56 -05:00
Scott Lahteine
ad21a4f07b Tweaks to HAL format and order 2018-09-28 15:59:50 -05:00
Scott Lahteine
b682a1961a Tweak STM32F7 TMC2660 class 2018-09-27 21:13:15 -05:00
Scott Lahteine
a0a3b23e35 Reduce Raptor bootscreen by 144 bytes 2018-09-27 18:24:40 -05:00
InsanityAutomation
95d793456b Add Formbot Raptor config, fix other Formbot configs (#11926) 2018-09-27 19:20:43 -04:00
Mitch Roote
d016b572e3 [2.0.x] Add pin configuration for Fysetc F6 (#11932) 2018-09-27 19:20:19 -04:00
Alexander Amelkin
84926b1d5a HAL general support for DISABLE_JTAG option (#11211) 
Some STM32-based boards may use multiplexed JTAG pins as IO. Up to now the `DISABLE_JTAG` option (defined in pins files) was only supported for AT90-based boards. This commit generalizes the code and adds support for boards based on STM32F1 and STM32F4.
 2018-09-27 19:02:50 -04:00
Scott Lahteine
c575c5d5f6
Bring example configs up to date (#11939) 2018-09-27 18:47:26 -04:00
Scott Lahteine
6b1a4f30a8 Fix case of T-Rex 3 _Statusscreen.h 2018-09-27 17:00:55 -05:00
Scott Lahteine
ab7bfa86e2 Fix case of T-Rex-3 _Statusscreen.h 2018-09-27 17:00:55 -05:00
Scott Lahteine
241168926d Update some configs 2018-09-27 16:42:59 -05:00
Scott Lahteine
cb6454118c Workaround for Pronterface M29 2018-09-27 16:27:02 -05:00
Victor Tseng
eeab4141db [2.0.x] Anycubic Trigorilla 14 pins tweak (#11869) 2018-09-27 16:06:21 -04:00
InsanityAutomation
cb9dc56630 Add GT2560 v3 support (#11914) 2018-09-27 15:13:15 -04:00
InsanityAutomation
f2e630a05e Stow probe on probing failed (#11936) 
Prevents probe from being left down should probing fail and print job continue
 2018-09-27 13:26:14 -04:00
Hannes Brandstätter-Müller
0b602ae101 [2.0.x] Fix Anycubic Kossel with Probe V1, stuck LCD message after stow (#11929) 2018-09-27 13:23:53 -04:00
Giuliano Zaro
dc11131656 [2.0.x] fix possible race condition (#11923) 
Fix some commits done in #11900
 2018-09-25 13:56:57 -04:00
Scott Lahteine
d6b9327c11 Followup for Endstop Noise Threshold 
Followup to #11912
 2018-09-25 13:50:49 -04:00
Scott Lahteine
aa6e8e9325 Tweak some config comments 2018-09-25 13:42:28 -04:00
Scott Lahteine
5490a664f5
Expose: Homing Validation and Endstop Noise Threshold (#11912) 2018-09-24 21:59:12 -04:00
Scott Lahteine
cee34f7290
Followup for BABYSTEP_HOTEND_Z_OFFSET (#11916) 2018-09-24 21:46:56 -04:00
teemuatlut
884ad75cb8 Update config files 2018-09-24 17:26:18 -04:00
Giuliano Zaro
18e456d38d [2.0.x] fix home endstop bug (DON'T MERGE, needs discussion) (#11900) 2018-09-24 16:56:01 -04:00
Scott Lahteine
6742026568 Followup for 6 extruders 2018-09-24 14:36:50 -04:00
Scott Lahteine
04bdff4115 Add a blank line 2018-09-24 12:49:02 -04:00
Marcio Teixeira
ccbd045f02 Fixed warning about comparing signed to unsigned (#11909) 2018-09-24 12:03:29 -04:00
InsanityAutomation
1104054d73 2.0 IDEX Independent z offset and other fixes (#11862) 
* Add Formbot Raptor board

Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>

* Add a second Z probe Z offset

Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>

* Modify method to utilize live adjustment of hotend z offset

Should probably move config option to babystepping and rename as it may now apply to all multiextruder systems

* Move config item and catchup other code to current method
 2018-09-24 09:40:48 -05:00
Scott Lahteine
217e0efd20
General option PAUSE_BEFORE_DEPLOY_STOW (#11905) 2018-09-24 00:43:43 -04:00
Scott Lahteine
849dea92a8 Move probe extras below probe types 2018-09-23 23:23:07 -04:00
Scott Lahteine
a2b0260f0f Update Sublime files 2018-09-23 19:59:08 -04:00
Hannes Brandstätter-Müller
a4cdffdd69 Support for manually deployed fixed probes (#11899) 2018-09-23 19:59:08 -04:00
Scott Lahteine
ddcbf80f23 Followup for Z_TRIPLE_ENDSTOPS 2018-09-23 12:22:31 -04:00
Marcio Teixeira
c411e7eb0d [2.0.x] Squelch compiler warnings seen with -Wall (#11889) 2018-09-23 12:00:34 -04:00
Roxy-3D
83105590a0 Better default values for Mesh Inset 2018-09-22 03:25:18 -04:00
Roxy-3D
4163c1a514 Fix end stop and Z-probe reporting logic 2018-09-22 03:25:18 -04:00
Scott Lahteine
ea9eb2fc8f Fix servo angles in config-store 2018-09-21 15:41:36 -04:00
Roxy-3D
d3d6be8210 Add MAX7219 reverse units option (#11860) 2018-09-19 18:54:51 -05:00
Scott Lahteine
beab9733f8 Remove extra clauses in config-store 2018-09-19 17:06:51 -05:00
Scott Lahteine
5a74b12b45 Followup to #11769 2018-09-19 16:40:32 -05:00
InsanityAutomation
f38570ac55 Add custom user menu title (#11769) 2018-09-19 15:04:34 -05:00
Scott Lahteine
17494099a9 Fix parking_extruder_tool_change 
Fix #11872
 2018-09-19 03:02:07 -05:00
Scott Alfter
140caf99b8 E0_CS_PIN moved from A13 to A15 on RAMPS-FD v2.2 (#11865) 2018-09-18 22:24:20 -05:00
Scott Lahteine
10590c2f80 Fix some fan conditionals 2018-09-18 21:23:33 -05:00
Scott Lahteine
e4ee607fc8 Fix Dual X FRS in M600 
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
 2018-09-18 21:23:33 -05:00
Scott Lahteine
bae8f82ba8
[2.0] Fix Mixing Extruder mixing factors (#11861) 2018-09-18 01:10:41 -05:00
Scott Lahteine
c5e5cc5e9f Fix some trailing whitespace, macros 2018-09-17 17:30:04 -05:00
AnHardt
54bd124665 2.0.x: Fix normalize_mix() (#11856) 
Mix factors needed to be updated consistent with the recent Stepper/Planner code refactor.
 2018-09-17 16:37:38 -05:00
Roxy-3D
5fbfbde532
Fix example file to pull in correct pins file 2018-09-17 10:41:30 -05:00
Roxy-3D
378f354939
IDEX Scaled Duplication is still under development 
Take it out of the menu until it is tested and working.
 2018-09-17 10:26:44 -05:00
Scott Lahteine
65045ba54b tmc_util fix part 2 
Followup to 115abf9
 2018-09-17 05:36:17 -05:00
Scott Lahteine
09a2bee8aa
Support more filament runout sensors in M119 (#11851) 2018-09-17 03:27:13 -05:00
Scott Lahteine
115abf9c53 Fix syntax error in front of tmc_axes 2018-09-17 01:10:20 -05:00
Roxy-3D
0780913848 IDEX Improvements (#11848) 2018-09-17 01:06:22 -05:00
Scott Lahteine
39732838b4 Tweak indent of Chinese languages 2018-09-17 00:58:32 -05:00
Scott Lahteine
53bd0b55cb Followup for 6 extruders 2018-09-16 23:57:50 -05:00
Scott Lahteine
1718eff54a Code changes supporting up to 6 extruders 2018-09-16 22:32:53 -05:00
Scott Lahteine
f5c210d33d Config changes supporting up to 6 extruders 2018-09-16 22:22:35 -05:00
Scott Lahteine
d948c6e867 RADDS Extension Board V3 support 2018-09-16 22:22:35 -05:00
Thomas Moore
c437bb08f1 Overhaul of the planner (#11578) 
- Move FWRETRACT to the planner
- Combine leveling, skew, etc. in a single modifier method
- Have kinematic and non-kinematic moves call one planner method
 2018-09-16 21:24:15 -05:00
Scott Lahteine
8323a08642 Clean up some whitespace 2018-09-16 19:44:21 -05:00
Scott Lahteine
6286afd456 Add Triple-Z options to example configs 2018-09-16 00:35:58 -05:00
Holger Müller
1a6f2b29b8 Add support for Triple-Z steppers/endstops 2018-09-16 00:35:58 -05:00
Hannes Brandstätter-Müller
bc06406d7d Fix Anycubic Kossel config (probe crash) (#11832) 2018-09-15 23:27:21 -05:00
Scott Lahteine
66f83d33e6 Fix some config comments 2018-09-15 23:21:55 -05:00
Hannes Brandstätter-Müller
84ed9b5a63 Send "G33 S P1" for Delta Height Calibration (#11831) 2018-09-15 20:17:35 -05:00
Scott Lahteine
215eee4fe5 Use 'friend' to access set_directions 2018-09-15 20:11:10 -05:00
Cassiano Leal
ff51e7322d Fix for Stepper::set_directions() compilation error (#11838) 2018-09-15 19:31:51 -05:00
Scott Lahteine
809b232fa2 Fix stepper directions after M501/M502 
See https://github.com/MarlinFirmware/Marlin/issues/11103#issuecomment-421387611

Co-Authored-By: tcm0116 <tcm0116@users.noreply.github.com>
 2018-09-14 20:00:55 -05:00
Scott Lahteine
f79a5a9dee Tweak spacing of L6470 options 2018-09-12 23:18:11 -05:00
Hannes Brandstätter-Müller
c37d3ae97d [2.0.x] Fix NOZZLE_PARK_FEATURE for Anycubic Kossel (#11812) 2018-09-12 15:37:38 -05:00
HenningJW
4fb2134f00 Fix non-sensical values for Zonestar themistor table (#11817) 
Values taken from Zonestar firmware for P802QA with a Melzi board. Timestamps from the firmware package are from April 2016.
 2018-09-12 15:36:04 -05:00
Scott Lahteine
b220a825a7 Fix raw_filwidth_value error 2018-09-12 04:31:55 -05:00
Scott Lahteine
1933d5d6fb Fix SD autostart with no LCD 2018-09-12 03:49:59 -05:00
Roman Moravčík
8bce5370c7 Updated slovak translation (#11807) 2018-09-12 03:29:17 -05:00
Giuliano Zaro
64d629ba2a [2.0.x] Italian language fix (#11796) 2018-09-12 03:28:22 -05:00
Scott Lahteine
8584d3697d Fix servo count define conflict 
`MAX_SERVOS` => `NUM_SERVO_PLUGS`
 2018-09-11 16:20:31 -05:00
Scott Lahteine
06949ae510 Fix MSG_FILAMENT_CHANGE_HEAT_1 for small LCD 2018-09-10 23:21:37 -05:00
Scott Lahteine
d882717d98
Save some PROGMEM with constexpr (#11798) 
When possible, make `active_extruder` a `constexpr` to save some PROGMEM.
 2018-09-10 23:09:26 -05:00
Sam Lane
4f883d5971 [2.0.x] Extruder-Distinct Linear Advance K Factors (#11789) 2018-09-10 22:37:32 -05:00
Scott Lahteine
fe9f088d60
[2.0.x] Anycubic LinearPlus, Trigorilla 1.4 (#11730) 2018-09-10 21:25:40 -05:00
Scott Lahteine
b6aae2b322 Tweak RAMPS_FD_V1 pins 2018-09-10 15:43:03 -05:00
Scott Lahteine
7391e23332 Fix RigidBoard FAN_PIN collision 2018-09-10 05:29:00 -05:00
Scott Lahteine
53b8c3bd66 Add EXTERNAL_CLOSED_LOOP_CONTROLLER to examples 2018-09-10 03:17:17 -05:00
Sam Lane
1b6bc19427 Add external closed loop controller support 2018-09-10 03:17:17 -05:00
Marcio Teixeira
2ebfe90be9 Add custom preheat temp to filament change (#11475) 2018-09-10 02:51:46 -05:00
Karl Andersson
69d0ed5791 [2.0.x] Fix ambiguous function call (SERIAL_PROTOCOL_F) when using Arduino_Core_STM32 (#11747) 2018-09-10 02:36:06 -05:00
Scott Lahteine
d32c4efc77 Fix some trailing whitespace 2018-09-10 01:26:20 -05:00
Alexander Amelkin
bc1ba998b2 [2.0.x] Fix undefined symbol 'g29_in_progress' (#11781) 2018-09-09 22:06:03 -05:00
InsanityAutomation
bad225dc04 Fix mesh leveling compile errors (#11768) 2018-09-09 04:19:48 -05:00
Sam Lane
d783400330 Updates to STM32F7 HAL, for completeness (#11770) 2018-09-09 03:26:15 -05:00
Scott Lahteine
72af8e0f02 Patch extruder_advance_K edit menu 
Fix #11776
 2018-09-09 03:21:08 -05:00
Sebastianv650
7e8c073fba Fix extruder stops extruding with LA (#11758) 2018-09-09 00:04:14 -05:00
Scott Lahteine
0c01099f17 hop_amount => current_hop 2018-09-08 21:20:37 -05:00
Scott Lahteine
eafd62308e
Use TMC2208Stepper v0.2.5 (#11714) 2018-09-08 20:41:21 -05:00
Kevin
e25d2ae4a2 [2.0.x] SWITCHING_TOOLHEAD (#11623) 2018-09-08 01:43:24 -05:00
Alexander Amelkin
f417408df1 [STM32F1] Fix HAL for new PlatformIO (#11749) 2018-09-07 18:15:32 -05:00
Roxy-3D
3d7f2c1fde
Fix directory name to be consistent (#11745) 2018-09-06 14:10:40 -05:00
Roxy-3D
a9c98a0e47
Create _Bootscreen.h 2018-09-06 10:24:03 -05:00
Roxy-3D
9f85d3a9cb
Create _statusscreen.h 2018-09-06 10:23:20 -05:00
Roxy-3D
e2e7b1d705
Break out support of the T-Rex 3 2018-09-06 10:20:20 -05:00
Roxy-3D
67996c2b66
Break out support for the T-Rex 3 2018-09-06 10:19:05 -05:00
Roxy-3D
9c8d9d282f
Break out support for Formbot T-Rex3 from previous versions 2018-09-06 09:49:04 -05:00
Roxy-3D
e3aac59637
Create pins_FORMBOT_TREX3.h 2018-09-06 09:46:23 -05:00
Roxy-3D
f580247581
Create pins_FORMBOT_TREX2.h 2018-09-06 09:45:29 -05:00
Roxy-3D
073857646b
seperate the T-Rex2 and T-Rex3 support 2018-09-06 09:43:43 -05:00
Roxy-3D
fe4fc2883b
Add support for Formbot T-Rex3 2018-09-06 09:41:59 -05:00
Scott Lahteine
2a61c9a939 Various fixups to configs, spacing, etc. 2018-09-06 06:44:31 -05:00
Scott Lahteine
b3efbc6e6e Add MANUAL_E_MOVES_RELATIVE to more configs 2018-09-06 02:09:14 -05:00
Scott Lahteine
679e4602fe Add MANUAL_E_MOVES_RELATIVE to examples 2018-09-06 02:00:25 -05:00
Marcio Teixeira
beb51c2d58 Show manual extrusion moves as relative in LCD 
- Implements FR#11724
- Old behavior can be restored by commenting out MANUAL_E_MOVES_RELATIVE
 2018-09-06 02:00:25 -05:00
Scott Lahteine
d10f29ae2e Pass segment length in G2-G3 2018-09-06 01:43:27 -05:00
Scott Lahteine
dcfde2317f
Pass segment length in prepare_kinematic_move_to (#11737) 2018-09-06 01:40:22 -05:00
Roxy-3D
d5379ee9d6
Fix search for white space in enqueued commands 2018-09-05 16:57:08 -05:00
Roxy-3D
8d5bea073b
Assume one Max7219 unit if not specified 2018-09-05 14:18:13 -05:00
Roxy-3D
9651ceb36b
Correct spelling of #endif 2018-09-05 10:46:08 -05:00
Scott Lahteine
b213a89ef5 Sanity-check NOZZLE_PARK_POINT 2018-09-05 06:18:08 -05:00
Scott Lahteine
86ee74731e Comment for RADDS + RRDFGSC 2018-09-05 05:45:17 -05:00
Kevin
ae1271b2ae RADDS: Update Full Graphic Display Pins (#11731) 2018-09-05 03:51:54 -05:00
Scott Lahteine
650d4313c4 Bring some configs up to date 2018-09-05 03:49:24 -05:00
AnHardt
530a13ab6c [2.0.x] SECURITYFIX missing max temp error when PID is used (#11717) 2018-09-05 01:41:45 -05:00
Scott Lahteine
12fded46c2 Correct some FR strings 
Co-Authored-By: pipersw <pipersw@users.noreply.github.com>
 2018-09-04 04:00:22 -05:00
Michael Triffon
aefc2f7cf9 Add Anet A2 and A2 Plus Configurations (#11677) 2018-09-03 23:38:51 -05:00
scott0122
72fdb6bab3 Fix SWITCHING_NOZZLE zdiff (#11683) 2018-09-03 23:24:40 -05:00
Scott Lahteine
8b837dc3ad No need for last \n in G-code items 2018-09-03 23:23:20 -05:00
Scott Lahteine
d1ceaf5550
[2.0.x] Followup to IDEX changes (#11707) 2018-09-03 23:15:31 -05:00
Roxy-3D
d62f4df0b7
Disable LCD Pins used by new Max7219 hook up if in that mode 2018-09-03 09:56:25 -05:00
Roxy-3D
fa772c31bf
Provide more options for Max7219 connection on Formbot 2018-09-03 09:52:36 -05:00
Scott Lahteine
8e18e48d49
Merge pull request #11610 from Freeviv/bugfix-2.0.x 
[2.0.x] Editable servo angles
 2018-09-03 03:55:38 -05:00
Giuliano Zaro
59e76e5fdf [2.0.x] Fix planner computation (#11708) 
Fix #11697
 2018-09-03 00:29:29 -05:00
Roxy-3D
509ee44611
Boot and status file should not have been added to main directory! 2018-09-02 10:25:36 -05:00
Roxy-3D
f8abe12a9c
Boot and status file should not have been added to main directory! 2018-09-02 10:25:13 -05:00
Roxy-3D
7680b64aa6
IDEX clean up (#11690) 2018-09-02 10:18:59 -05:00
teemuatlut
49e107cea9 Restrict SW serial to AVR (#11696) 2018-09-01 15:24:44 -05:00
Scott Lahteine
18f1af2dca Fix up Teensy tests, servo sanity 2018-09-01 01:10:20 -05:00
Scott Lahteine
74a04aed55 Fix compile error with NO_LCD_MENUS 2018-08-31 19:16:04 -05:00
Scott Lahteine
509e1cf2bd Add *_DRIVER_TYPE to remaining configs 2018-08-31 19:07:17 -05:00
Scott Lahteine
d55f44edba
Printcounter improvements (#11689) 2018-08-31 17:40:39 -05:00
Scott Lahteine
6a3207391f Remove obsolete HAL_timer_restrain 2018-08-31 16:17:22 -05:00
Scott Lahteine
e3fc9aa35f Update some config comments 2018-08-31 16:03:44 -05:00
Scott Lahteine
136860e8bb Sanity-check SERVO pin for servo probes 2018-08-31 15:47:47 -05:00
Roman Moravčík
66de50f5f8 Updated slovak translation (#11684) 2018-08-31 15:37:49 -05:00
scott0122
ada85d5585 Improve HOTEND OFFSET Z display precision to 3 (#11686) 2018-08-31 15:15:40 -05:00
scott0122
607c1e58d9 Improve HOTEND OFFSET Z display precision to 3 (#11685) 2018-08-31 15:14:33 -05:00
Scott Lahteine
3e81745e81 Fix issues, make optional 2018-08-29 17:58:02 -05:00
Jan
aa80e448e2 Store servo angles in EEPROM 2018-08-29 17:58:02 -05:00
Scott Lahteine
9953213513 Add EDITABLE_SERVO_ANGLES to example configs 2018-08-29 17:57:52 -05:00
Marcio Teixeira
0966bdcbc4 Reorganized ultralcd menu (10317) (#10360) 
Replaced "Prepare" and "Control" menus with "Movement", "Temperature", "Configuration" and "Advanced Settings"
 2018-08-29 16:51:14 -05:00
Scott Lahteine
e40a3eef04 Support for Anet A2 Plus 2018-08-29 03:39:43 -05:00
Scott Lahteine
32e38fee74 Update Controller Fan for Y2,Z2 2018-08-29 01:49:48 -05:00
Jeonghwan Roh
59cf217e77 Fix 5 mixing steppers 2018-08-29 01:49:48 -05:00
Scott Lahteine
2a2e8c314e Suppress emergency parser G-code errors 
Co-Authored-By: srieche <srieche@users.noreply.github.com>
 2018-08-29 01:04:55 -05:00
Ilya Bukhonin
7ecb8b4af5 [2.0.x] Teensy 3.1 and 3.2 support (#11460) 2018-08-27 21:49:49 -05:00
Pablo Crespo
409a0632af [2.0.x] Add Morpheus Board support (#11651) 2018-08-27 21:28:03 -05:00
Marcio Teixeira
0f14977b5d LIGHTWEIGHT_UI: Allow feedrate % to exceed 255% (#11656) 
- Changed type of integer used for feedrate percentage from uint8_t to uint16_t.
 2018-08-27 21:26:32 -05:00
scott0122
6dc9553aa5 Fix SWITCHING_NOZZLE compile error (#11657) 2018-08-27 21:25:25 -05:00
Scott Lahteine
a15e570d3b Fix SD progress with Lite Status Screen 
Co-Authored-By: Lê Hoàng <icy.lord.love.angel@gmail.com>
 2018-08-26 17:12:05 -05:00
Scott Lahteine
66966dbd69 Tweak comments for newer multiplexer 2018-08-25 17:00:49 -05:00
Scott Lahteine
933d833ec8 Tweak some Anet A6 comments 2018-08-24 21:50:53 -05:00
Scott Lahteine
d1c9517903 Followup to hotend_offset[Z] patch 2018-08-24 21:32:00 -05:00
Scott Lahteine
e2b8fc4f17 Reduce some debug strings 2018-08-24 21:11:39 -05:00
Chris Pepper
b71c2b8651 [2.0.x] Update LPC176x tests, fix clean script (#11617) 2018-08-24 18:53:24 -05:00
Scott Lahteine
a317bb4991 Remove stray tab 2018-08-24 17:35:13 -05:00
Scott Lahteine
acf5ae3083 !ENABLED => DISABLED 2018-08-24 16:36:37 -05:00
Scott Lahteine
ba1919c1eb HAL tweaks to LPC1768 main 2018-08-22 17:16:18 -05:00
Scott Lahteine
0987ed2a18 Use American English 2018-08-22 17:16:18 -05:00
Kevin
6483285bc5 HOTEND_OFFSET_Z always available (#11603) 2018-08-22 00:21:29 -05:00
Michael Triffon
f8c52c9c29 Azteeg X5 Mini WiFi support (#11601) 2018-08-21 23:58:26 -05:00
jneilliii
3671c63cde Einsy Full Graphic LCD Fix (#11604) 
Fixed issue with LCD timings for Einsy RAMBo board.
 2018-08-21 23:43:52 -05:00
Colin Gilgenbach
593d5375ea Fix G28 resetting DUAL_NOZZLE_DUPLICATION_MODE (#11605) 
There's no reason for G28 to reset DUAL_NOZZLE_DUPLICATION_MODE, because it only affects the E stepper, unlike DUAL_X_CARRIAGE which affects the X steppers as well.
 2018-08-21 23:42:55 -05:00
Scott Lahteine
f0dbe61692 Tweaks to motion.h reachable tests 2018-08-21 23:34:29 -05:00
Scott Lahteine
2d3317a35b Prettify Dual X Carriage description 2018-08-21 23:34:29 -05:00
Roxy-3D
cd9868f442
Make position_is_reachable() smarter about IDEX machines` 
On many IDEX machines the allowed travel of the X1 carraige and X2 carraige does not perfectly overlap.

This helps the issue.   But more work needs to be done at the higher level.  (For example the X1_MAX_POS should probably be factored into G26's mesh validation pattern.)
 2018-08-21 19:12:26 -05:00
Scott Lahteine
97f6396b25 Fix RE_ARM LCD pins to avoid #undef 2018-08-21 12:47:40 -05:00
Scott Lahteine
0e25f66c09 Fix Ultimaker servo pin 
As pointed out at https://github.com/MarlinFirmware/Marlin/issues/7981#issuecomment-407116642
 2018-08-21 11:39:53 -05:00
Scott Lahteine
ad12b9b46b Fix indentation, whitespace, spelling, formbot pins... 2018-08-21 09:47:57 -05:00
Scott Alfter
b5537dde7f need to add E2END to pins_RAMPS_FD_V2.h (#11564) 2018-08-21 02:16:31 -05:00
Scott Lahteine
8f0bbdcc9b
Fix up Max7219 orientations (#11596) 2018-08-21 02:06:18 -05:00
jmz52
a77f8c6dd5 Implement servo support for STM32F1 (#11580) 
Implement servo support for STM32F1. Original code was incomplete and depended on Servo library from stm32duino which conflicts with `module/servo.h`.
 2018-08-20 21:13:51 -05:00
Dave Johnson
0456caf0ad Consolidate shared HALs and isolate HAL compile (#11552) 2018-08-20 21:11:12 -05:00
jmz52
dfe18ac633 Fix compilation error for STM32F1 with U8GLIB_SSD1306 or U8GLIB_SH1106 enabled (#11583) 
The `binary.h` file required by `lcd/dogm/dogm_bitmaps.h` is not present in stm32duino environment. Binary macros are defined in `bit_constants.h` in stm32duino framework.
 2018-08-20 20:37:56 -05:00
Roxy-3D
b0a8ce59bd
Update Boards.h to include Formbot support 2018-08-20 16:46:27 -05:00
Roxy-3D
62ce937540
Update pins.h to include the Formbot board 2018-08-20 16:44:54 -05:00
Roxy-3D
a82be36d5d
Create pins_FORMBOT.h 2018-08-20 16:43:42 -05:00
ghent360
00d24a8219 Don't call __delay_4cycles for 0 cycle delay - takes a really long time. (#11586) 2018-08-18 22:50:11 -05:00
Scott Lahteine
56f1e17a25
[2.0.x] Max7219 cleanup, simplify, and extend (#11575) 2018-08-18 01:33:13 -05:00
jmz52
0b2d686160 Fix "SD init fail" problem for STM32F1 (#11579) 
Fix "SD init fail" problem for STM32F1 caused by incorrect SS pin state and incorrect SPI mode. Issue #11225
 2018-08-17 23:27:10 -05:00
Scott Lahteine
a98f21ec5e Marlin assumes signed chars 2018-08-16 22:52:42 -05:00
Kevin
db30650731 Fix UBL/Homing (#11566) 2018-08-16 08:28:40 -05:00
Roxy-3D
aae4c67e5d
Max7219 Clean Up (#11563) 
Some of the Rotations did not do the right thing with setting and clearing pixels.
I think it is correct now.   But if not...  It is much closer to being correct.
 2018-08-15 21:22:28 -05:00
InsanityAutomation
9de730b2bf Update tool_change.cpp (#11559) 2018-08-15 19:30:52 -05:00
InsanityAutomation
c2553f9888 2.0.x - Idex match119 (#11556) 
* Update ubl_G29.cpp

* Update ultralcd.cpp
 2018-08-15 13:26:11 -05:00
Roxy-3D
e9de321ac0
declare void Max7219_register_setup(); 2018-08-15 10:36:51 -05:00
Scott Lahteine
952a1bc9d5
Merge pull request #11551 from thinkyhead/bf2_trinamic_fixes 
[2.0.x] Fix TMC2208 SW serial communication
 2018-08-14 19:07:08 -05:00
petrzjunior
67613bf5bd Update Czech translations (#11510) 2018-08-14 18:45:16 -05:00
Scott Lahteine
bd6d032628 Update default driver configuration 
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
 2018-08-14 18:42:04 -05:00
Scott Lahteine
1561e61df7 New TMC2208 constructor 
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
 2018-08-14 18:41:51 -05:00
Nils Hasenbanck
b37bfeffeb [2.0.x] Use the new const functions of the persistentStore api (#11544) 2018-08-14 18:35:36 -05:00
Chris Pepper
5573ef62c6 [2.0.x] PersistentStore update followup (#11549) 2018-08-14 17:54:12 -05:00
Scott Lahteine
846bd24eb9 MALYAN_LCD is ok without SD 2018-08-14 05:31:47 -05:00
Scott Lahteine
834ea7fcea Remove 'const' from PersistentStore::capacity 2018-08-14 04:46:10 -05:00
Dave Johnson
c64199941e Compile only selected PIO environment (#11519) 2018-08-14 03:28:52 -05:00
Andy Shaw
5be2559eda Use flash memory to emulate EEPROM (#11500) 
Use a sector of the LPC flash memory to emulate EEPROM storage, removing the need to have an SD card to store system parameters.
 2018-08-14 01:19:34 -05:00
Scott Lahteine
6964e1a95a Clean up trailing whitespace 2018-08-14 00:55:37 -05:00