Scott Lahteine
130e36d766
Tweak ABL logging, document probing
2020-02-08 17:47:54 -06:00
Robert Stein
3a3429b1ef
Fix probe with multi-endstops ( #16793 )
2020-02-06 15:28:46 -06:00
Scott Lahteine
f312ddfa4f
More updates for 8 extruders, REPEAT
2020-02-04 12:37:20 -06:00
Scott Lahteine
7bf2190f03
Fix CALIBRATION_GCODE pin handling
2020-02-04 08:32:43 -06:00
Scott Lahteine
081ef46e76
Fix Arduino IDE compile for DUE
...
Fixes #16767
2020-02-04 08:32:20 -06:00
Scott Lahteine
15b6ad41bc
Fix E stepper stays on bug
...
Fixes #16753
2020-02-04 02:39:37 -06:00
Bob Kuhn
0268c1d02c
STM32duino - Use SDIO for onboard SD ( #16756 )
2020-02-04 01:24:11 -06:00
Scott Lahteine
bfad23d3e2
(c) 2020
2020-02-03 08:00:57 -06:00
Scott Lahteine
7f9c62437e
Corner Leveling: Add inset for each side ( #16759 )
2020-02-03 00:00:35 -06:00
Scott Lahteine
72b4d91d2e
Add Z_AFTER_HOMING to raise Z more in G28 ( #16755 )
2020-02-02 00:02:30 -06:00
Scott Lahteine
ee6003be87
Revert breaking change to _FAN_PWM macro
2020-02-01 23:07:20 -06:00
Scott Lahteine
4716dac874
Apply REPEAT, RREPEAT, and loop macros ( #16757 )
2020-02-01 21:00:53 -06:00
Scott Lahteine
0e72c315a0
Minor string storage optimization
2020-02-01 20:29:31 -06:00
Scott Lahteine
22556a7bbf
More 8-extruder fixups
2020-02-01 15:19:58 -06:00
Scott Lahteine
995a9238b3
Probe singleton patch
...
Followup to #16751
2020-02-01 07:57:10 -06:00
Jason Smith
c3cab37d7e
Fix Temperature::over_autostart_threshold ( #16749 )
2020-02-01 04:51:57 -06:00
InsanityAutomation
e58d1bf974
G34 automatic point assignment ( #16473 )
2020-02-01 04:50:44 -06:00
Scott Lahteine
90b6324563
Encapsulate probe as singleton class ( #16751 )
2020-02-01 04:21:36 -06:00
Scott Lahteine
43d3463d5d
Misc cleanup, whitespace
2020-02-01 03:50:42 -06:00
Jason Smith
9a8de23858
Consistent M112 with Emergency Parser ( #16747 )
2020-01-31 23:08:37 -06:00
Scott Lahteine
c4df5cf9a6
Include macros for delta ABC
2020-01-31 04:40:33 -06:00
Artur Petrzak
e4679c1b78
(21) PT100 for MCUs with 3.3v logic ( #16731 )
2020-01-30 18:00:37 -06:00
Scott Lahteine
9caf5c05e7
Refactor heater watch, job timer auto-start ( #16725 )
2020-01-30 03:24:43 -06:00
Scott Lahteine
50889c0f94
Move L64XX index_to_axis to progmem ( #16697 )
2020-01-30 03:24:23 -06:00
chgi
99b6a132bc
Fix G60/G61 slots > 8 and compile error ( #16715 )
2020-01-30 03:18:45 -06:00
InsanityAutomation
9bb8176d34
Fix Toolchange (!no_move) return to status ( #16699 )
2020-01-29 00:06:06 -06:00
Jason Smith
131acf304b
Fix Manual Bed Leveling with multiple extruders ( #16688 )
2020-01-27 15:57:21 -06:00
Hans007a
e2eef1256a
G60/G61 Position Save/Restore ( #16557 )
2020-01-26 23:19:05 -06:00
Scott Lahteine
56cd747c8b
Rename some temperature members
2020-01-26 21:08:55 -06:00
Scott Lahteine
1d1dc8e339
More 8 extruder defines
2020-01-26 03:24:54 -06:00
Jason Smith
44d400db83
Fix HOMING_BACKOFF_MM for DELTA ( #16657 )
2020-01-26 03:16:03 -06:00
yangwenxiong
248b7dfa59
BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans ( #16595 )
2020-01-25 02:13:39 -06:00
InsanityAutomation
79810b7fcb
G12 defaults per tool. Event G-code for post-toolchange ( #16554 )
2020-01-21 02:51:23 -06:00
MaukCC
04d64351a2
Add HMS434 V15 ATSAM board ( #16620 )
2020-01-21 01:10:31 -06:00
InsanityAutomation
97b5a5f469
Provide methods for M420 + MBL ( #16602 )
2020-01-20 01:44:36 -06:00
Giuliano Zaro
ef8f829513
Fix CHAMBER_MAXTEMP security margin ( #16600 )
2020-01-20 00:44:51 -06:00
InsanityAutomation
0fcf2b1110
Quad Z stepper support ( #16277 )
2020-01-19 23:35:07 -06:00
Scott Lahteine
e9ae585647
Patch for _STEP_INIT
2020-01-19 20:50:33 -06:00
Scott Lahteine
dda76e50a9
Use bool in pin compare
2020-01-19 20:05:53 -06:00
Scott Lahteine
37849969ad
Function-like macros
2020-01-19 20:01:22 -06:00
Scott Lahteine
707349d492
Updates for L64XX
2020-01-19 19:53:12 -06:00
tompe-proj
a338dce83f
PINDA v2 temperature sensor / compensation ( #16293 )
2020-01-17 17:16:45 -06:00
Scott Lahteine
1bb1ce7475
Move macros to stepper/indirection
2020-01-16 05:25:16 -06:00
Jason Smith
c305c2cc6b
Fix some warnings, Melzi pins
2020-01-15 19:57:16 -06:00
Dennis
2d7f94cae1
Adjustable ADC debounce delay ( #16264 )
2020-01-15 18:06:03 -06:00
Bob Kuhn
1ad53cee1f
Improved STMicro L64XX stepper driver support ( #16452 )
2020-01-13 18:47:30 -06:00
Jason Smith
d22eb261cf
Fix probeless delta build ( #16537 )
2020-01-11 17:14:33 -06:00
FlyingSamson
fbf2f36cae
Only constrain motion on homed axes ( #16533 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-01-11 17:06:52 -06:00
Giuliano Zaro
0391e5bcc7
Prevent Z misaligment on tool change ( #16518 )
2020-01-10 16:12:21 -06:00
ellensp
669fe74096
Fix compile error w/out LCD ( #16502 )
2020-01-09 04:51:41 -06:00
Scott Lahteine
6e658a7c04
Code style and comment tweaks
2020-01-08 20:00:26 -06:00
Scott Lahteine
95046c9047
Extend SERIAL_CHAR to take multiple arguments
2020-01-08 18:36:47 -06:00
Vertabreaker
d26c32375e
Fix EEPROM array size bug ( #16475 )
2020-01-07 21:49:27 -06:00
Vertabreaker
5e1f0e5e90
Followup to EEPROM patch ( #16470 )
2020-01-05 02:19:50 -06:00
Jamie
fc07b0ea30
Fix EEPROM error with EXTRUDERS == 0 ( #16464 )
2020-01-05 01:54:30 -06:00
George Fu
e593da1c23
Update and fix DGUS ( #16317 )
2020-01-03 21:00:44 -06:00
Jason Smith
3cade6245e
Fix MIN_PROBE_EDGE bug in default ABL G29 ( #16367 )
2020-01-03 17:46:26 -06:00
Scott Lahteine
1d0452c41e
Standardize drivers.h values, add class indirection ( #16448 )
2020-01-03 17:11:36 -06:00
Dirk O. Kaar
d0e1166cce
Fix Visual Micro "Arduino IDE for Visual Studio" support ( #16418 )
2020-01-02 19:01:38 -06:00
Scott Lahteine
a2cda631d9
Clean up trailing whitespace
2020-01-02 16:33:50 -06:00
Jason Smith
9ff2d34bf8
Fix warnings in stepper.cpp ( #16364 )
2020-01-01 22:06:50 -06:00
Giuliano Zaro
47edbd9220
Fix min limit for acc, feed, jerk ( #16416 )
2020-01-01 20:38:33 -06:00
InsanityAutomation
1c9ccce520
Add NOZZLE_AS_PROBE (no probe offsets) ( #15929 )
2019-12-24 00:03:08 -06:00
Luc
24eaf2d7e0
Some ESP32 patches ( #16297 )
2019-12-22 16:11:17 -06:00
Jason Smith
d5bc5547ee
Step timing cleanup and rounding fix ( #16258 )
2019-12-21 18:36:25 -06:00
Markus Towara
856013cc0f
Fix planner compile error ( #16272 )
2019-12-20 22:04:49 -06:00
BigTreeTech
bbe0ffb2fa
BigTreeTech SKR v1.4 support ( #16236 )
2019-12-19 02:41:35 -06:00
Jason Smith
1bad8f1b17
Improve pulse timing and step reliability ( #16128 )
2019-12-19 02:38:48 -06:00
Luu Lac
509e1ab053
TOUCH_MI_DEPLOY_XPOS fallback to X_MIN_POS ( #16226 )
2019-12-15 11:21:39 -06:00
Bo Herrmannsen
98382fcea5
Include Z in SCARA steps feedrate ( #16193 )
2019-12-12 17:13:49 -06:00
iain MacDonnell
629c039eed
Update M503 MBL G29 report ( #16199 )
2019-12-12 16:54:54 -06:00
Antti Andreimann
b65ab21733
Fix compile error with disabled PIDTEMP ( #16108 )
2019-12-05 20:51:41 -06:00
Vertabreaker
0832a60db3
EXP3D Imprimante Multifonction ( #16079 )
2019-12-03 06:52:38 -06:00
Scott Lahteine
cb7817093f
More serial macro cleanup
2019-12-01 22:23:36 -06:00
Scott Lahteine
9114a14eca
Fix commas in EEPROM code
2019-12-01 21:59:58 -06:00
brian park
b258cc85bf
Mostly Printed SCARA (MPSCARA) support ( #15573 )
2019-11-30 08:57:34 -06:00
Scott Lahteine
f83bc0aa13
Optimize common strings
...
Saves 128 bytes in testing with `mftest mega 1 -y`
2019-11-29 22:54:42 -06:00
Bob
5a98c83eef
Use MAX6675 SPI pins for MAX31865 over SPI pins ( #16024 )
2019-11-27 01:45:03 -06:00
Jason Smith
752a1e76ab
Float ABL mesh boundaries, no probe position rounding ( #16018 )
2019-11-27 01:29:25 -06:00
Scott Lahteine
077eeaa0f4
Fix mixing extruder feedrate ( #15905 )
2019-11-26 18:03:59 -06:00
haschtl
ff6518c0a8
Add PID_FAN_SCALING option ( #15585 )
2019-11-26 03:34:43 -06:00
Chris Pepper
c1aac3a0c9
Fix delta_mm.e with zero extruders ( #15996 )
2019-11-26 02:58:17 -06:00
Jason Smith
d0282e5ba8
Allow slop in position_is_reachable for delta ( #16003 )
2019-11-26 02:53:28 -06:00
Scott Lahteine
47c19aa2b3
Clean up probe accessors
2019-11-23 17:02:04 -06:00
Jason Smith
b904ba0f29
Improve Delta probing / calibration ( #15887 )
2019-11-21 03:26:00 -06:00
Bob
751cd1f533
MAX31865 temperature sensor ( #15930 )
2019-11-21 03:15:10 -06:00
Scott Lahteine
3f4636e916
"nozzle_to_probe_offset" is obsolete
2019-11-13 03:07:54 -06:00
Scott Lahteine
a4709ba765
Store unscaled PID values in EEPROM ( #15884 )
2019-11-13 01:47:46 -06:00
Lino Barreca
ac71cdc265
New HardwareTimer for STM32 5.7.0 ( #15655 )
2019-11-12 19:23:02 -06:00
Scott Lahteine
5e5045c4ee
Touch UI finishing touches
2019-11-10 18:52:53 -06:00
Marcio Teixeira
5639b8ca20
Touch UI fixes for Cocoa Press ( #15847 )
2019-11-10 18:49:41 -06:00
LinFor
48b7a1e66e
Allow non-zero "fan off" PWM value ( #15709 )
2019-11-10 16:33:56 -06:00
Scott Lahteine
776632c503
Add and apply REPEAT macro ( #15829 )
2019-11-09 17:59:04 -06:00
LinFor
a84e3d1b80
Use native ADC resolution where possible ( #15719 )
2019-11-06 17:49:17 -06:00
Jason Smith
814a2eaf8f
Allow TMC baud rate override ( #15773 )
2019-11-06 17:08:12 -06:00
Scott Lahteine
e6dfc991ae
Patch tabs, heater led tests
2019-11-06 16:28:36 -06:00
Scott Lahteine
a89f4703df
Tweak permissions
2019-11-06 16:10:14 -06:00
Scott Lahteine
15f94e5ee5
Add NUL_STR global
2019-11-02 07:31:07 -05:00
Scott Lahteine
c80eda073f
M119 => report_states
2019-10-30 15:24:10 -05:00
LinFor
7d24f152d8
Fix a typo breaking the build ( #15726 )
2019-10-30 15:10:08 -05:00
Scott Lahteine
c5713b5e98
Clean Endstops::event_handler
2019-10-29 15:58:26 -05:00
Scott Lahteine
7a342ecb93
Show Total E during print ( #15703 )
2019-10-27 17:49:27 -05:00
Scott Lahteine
0f8c3ed29a
Prevent extra "too long/cold" errors
2019-10-27 17:40:07 -05:00
Scott Lahteine
93f0012959
Cancel Objects - As seen at ERRF2019 ( #15590 )
2019-10-24 15:35:40 -05:00
Daniel Callander
475041656c
Reset position_shift on G28 ( #15653 )
2019-10-24 12:20:09 -05:00
Robby Candra
f368c14a61
Fix Probe Manually Grid ( #15598 )
2019-10-19 12:29:50 -05:00
Bo Herrmannsen
0d7736d663
Enable M191 ( #15531 )
2019-10-16 15:02:37 -05:00
Scott Lahteine
b7b303f4bf
Spindle/Laser power in planner blocks ( #14437 )
2019-10-15 16:10:20 -05:00
Piotr
fe4c69b64a
Poll *all* enabled endstop pins ( #15525 )
2019-10-15 13:28:04 -05:00
Markus Towara
437978d349
Bring SPI_SENSORLESS code up to date ( #15560 )
2019-10-15 11:34:45 -05:00
Matthew Piercey
ac8083588b
Add config for Wanhao Duplicator i3 v2.1
2019-10-11 00:59:58 -05:00
Robby Candra
ac466ecf74
Change Junction Deviation to Classic Jerk ( #15505 )
2019-10-10 19:31:59 -05:00
Jason Smith
46763efb75
Fix tool-change move with hotend offset ( #15491 )
2019-10-09 19:48:00 -05:00
Marcio Teixeira
6a865a6146
Multi-language support ( #15453 )
2019-10-09 19:46:10 -05:00
Marcio Teixeira
dc14d4a13c
Improvements and fixes to Lulzbot UI ( #15490 )
2019-10-09 19:44:49 -05:00
Scott Lahteine
e6055dce76
Followup to position refactor
2019-10-08 22:08:05 -05:00
Scott Lahteine
af80653f3f
Always report all PIDs in M503
...
Fix #14474
2019-10-08 21:07:19 -05:00
Scott Lahteine
914605c89c
gcc is forgiving of stray ;
2019-10-08 20:36:39 -05:00
Scott Lahteine
c0005e939c
Enable junction deviation by default ( #15481 )
2019-10-08 19:42:18 -05:00
Scott Lahteine
1df6c7a46c
Work around a compiler bug
...
See #15478
2019-10-08 19:27:03 -05:00
Scott Lahteine
cc822c1a05
Use lambdas in menus, where possible ( #15452 )
2019-10-07 19:44:33 -05:00
Scott Lahteine
211ff67440
Patch blocking and manual moves
2019-10-06 23:58:19 -05:00
Giuliano Zaro
43aba9f918
Fix compile errors & temp range
2019-10-05 18:27:03 -05:00
InsanityAutomation
438835f6a5
Configurable Max Accel, Max Feedrate, Max Jerk edit limits ( #13929 )
2019-10-01 19:59:48 -05:00
Scott Lahteine
806d64e1bf
X_SENSORLESS includes AXIS_HAS_STALLGUARD
2019-09-30 22:56:22 -05:00
Scott Lahteine
e3fd0519b3
Reduce need for UNUSED
2019-09-30 22:56:22 -05:00
LinFor
98f614ddb1
Use MAX_BED_POWER instead of BANG_MAX to heat outside PID_FUNCTIONAL_RANGE ( #15431 )
2019-09-30 22:19:12 -05:00
Timm
b198f321c8
Add missing motion inline methods ( #15433 )
2019-09-30 19:57:22 -05:00
Scott Lahteine
a9c259c77a
Patch PrintrboardG2 build (on spec)
2019-09-30 02:47:55 -05:00
Scott Lahteine
139b7196a0
Watchdog cleanup ( #15283 )
2019-09-29 17:57:29 -05:00
Scott Lahteine
74746c6573
Fix probe_offset EEPROM field test
2019-09-29 16:55:50 -05:00
Bob Kuhn
178dcd6fd8
SPI chaining with TMCStepper simplified interface ( #15179 )
2019-09-29 05:47:20 -05:00
Frederik Kemner
4564ad2920
Fix build if EXTRUDERS = 0 ( #15417 )
2019-09-29 04:32:24 -05:00
Scott Lahteine
50e4545255
Add custom types for position ( #15204 )
2019-09-29 04:25:39 -05:00
Scott Lahteine
81b9c7c6ee
No motion constraint before homing
...
Sensible approach to soft endstops before the machine is homed.
Ref: https://github.com/MarlinFirmware/Marlin/pull/15027#issuecomment-533301094
Co-Authored-By: comps <comps@nomail.dom>
2019-09-28 21:35:49 -05:00
Ludy
41ea2d8c31
Fix auto-fan compile error ( #15402 )
2019-09-28 15:37:41 -05:00
InsanityAutomation
a6b0223eea
Revive and improve DELTA probe bounds, LRFB options ( #15372 )
2019-09-28 01:19:11 -05:00
Scott Lahteine
d683f98019
Return buffer in duration.toString
2019-09-27 04:45:01 -05:00
Marcio Teixeira
a18d16fb8b
Do not implicitly concatenate localized strings ( #15383 )
2019-09-27 04:38:43 -05:00
Scott Lahteine
455dabb183
Add a feedRate_t data type ( #15349 )
2019-09-26 01:28:09 -05:00
Scott Lahteine
ee7558a622
Tweaks to Z fade behavior
2019-09-26 01:15:47 -05:00
Scott Lahteine
d49d40f7b0
Home XYZ newline
2019-09-25 22:26:16 -05:00
Scott Lahteine
b2e1f77f58
Fix extraneous "Home XYZ First" message
2019-09-25 21:57:20 -05:00
Scott Lahteine
39578a5919
Fix probe without leveling
2019-09-25 19:57:52 -05:00
Robby Candra
c3f09e2b1b
Set MAX_OVERSHOOT_PID_AUTOTUNE to 30 ( #15257 )
2019-09-25 09:43:00 -05:00
Scott Lahteine
661c3cfc99
Fix mesh bounds for MBL
2019-09-25 09:05:46 -05:00
Jason Smith
66d0221077
Fix build with more than 2 Trinamic E steppers ( #15329 )
2019-09-25 02:30:07 -05:00
Robby Candra
9c288a682d
Followup to probe_at_point change ( #15342 )
2019-09-25 02:29:10 -05:00
Scott Lahteine
5288c399ce
Patch probe offset name, defines
2019-09-24 23:39:23 -05:00
Scott Lahteine
4e8d9fe59b
zprobe_offset => probe_offset
2019-09-24 23:36:09 -05:00
Scott Lahteine
3819f79945
Fix pid_output declaration
2019-09-24 22:32:13 -05:00
InsanityAutomation
df1e51258a
Add M851 X Y probe offsets ( #15202 )
2019-09-24 21:29:21 -05:00
Scott Lahteine
bd2b44c4ed
Require newest TMCStepper
2019-09-24 18:00:06 -05:00
Jason Smith
9aaa056286
Fix SCARA build from Arduino IDE ( #15317 )
2019-09-24 17:29:25 -05:00
Scott Lahteine
5e13fe989f
Rename some feedrate-oriented functions
2019-09-23 22:36:41 -05:00
Jason Smith
514223f960
Fix BACKLASH_COMPENSATION compiler issues ( #15307 )
2019-09-20 00:48:41 -05:00
InsanityAutomation
6a312fae80
Add before/after dir change delays ( #15314 )
2019-09-19 23:05:17 -05:00
Jason Smith
252f31b6f1
Fix/improve backoff feedrates ( #15300 )
2019-09-18 17:04:13 -05:00
Scott Lahteine
c353eaa146
Misc changes from struct refactor ( #15289 )
2019-09-17 18:16:28 -05:00
Scott Lahteine
f01f0d1956
Drop C-style 'void' argument
2019-09-16 20:31:21 -05:00
Scott Lahteine
d63e0f6d98
Pending refactor tweaks
2019-09-16 15:10:14 -05:00
Scott Lahteine
465c6d9230
Simpler Allen Key config. Fixes, cleanups from refactor ( #15256 )
2019-09-14 03:05:10 -05:00
Scott Lahteine
c590e8ac05
Improve Power-loss Recovery ( #15135 )
2019-09-10 18:52:41 -05:00
Scott Lahteine
75927e17dd
Filament Width Sensor singleton ( #15191 )
2019-09-10 18:48:58 -05:00
Scott Lahteine
584c86bed1
More "zero extruders" changes ( #15213 )
2019-09-10 02:20:49 -05:00
Scott Lahteine
565a0e11ed
Prevent 'current' name conflict, if needed
2019-09-09 03:17:11 -05:00
Luu Lac
8bca3fcf2c
Display chamber with HAS_TEMP_CHAMBER ( #15194 )
2019-09-08 02:20:18 -05:00
Jamie
dbee0e9c54
Analog joystick jogging control ( #14648 )
2019-09-08 00:55:34 -05:00
Tanguy Pruvot
ec3f29a33a
Fix linux_native long to int32 warnings ( #15192 )
2019-09-07 20:30:47 -05:00
ManuelMcLure
eed7c2fe2f
Fix 'echo:' in TMC parameters M503 report ( #15193 )
2019-09-07 20:29:38 -05:00
AnHardt
b7b0021b5c
Fix Thermistor 75 ( #15181 )
2019-09-06 16:23:27 -05:00
Scott Lahteine
91c3b8e3ca
Reformat ADC cases
2019-09-05 20:02:31 -05:00
Scott Lahteine
4cdf7a1b93
Add ADC helpers to temp_info_t
2019-09-05 19:48:52 -05:00
Scott Lahteine
bf3cd8e5aa
Tweak var names
2019-09-05 01:40:09 -05:00
Scott Lahteine
7496e1cd67
whitespace
2019-09-04 21:55:41 -05:00
kakou-fr
6b1c4dec46
Touch Mi: Add magnet Y position ( #15166 )
2019-09-04 18:09:12 -05:00
Ludy
beffcd856b
Update German language, (c) ( #15164 )
2019-09-04 16:59:26 -05:00
Karl Andersson
123ecfe613
Allow MINIMUM_STEPPER_PULSE override with LV8729 ( #15162 )
2019-09-04 16:57:13 -05:00
AnHardt
89a2161cac
MINIMUM_STEPPER_DIR_DELAY in LA ( #15154 )
...
Add missed MINIMUM_STEPPER_DIR_DELAY after dir change in LinearAdvance interrupt.
2019-09-03 20:01:51 -05:00
Scott Lahteine
12344085c0
Update temperature.cpp
2019-09-02 19:21:47 -05:00
Scott Lahteine
451a942e95
Suspend queue during wait_for_hotend
2019-09-02 01:14:03 -05:00
Scott Lahteine
586b334c2a
Split up stepper indirection ( #15111 )
2019-08-31 19:44:45 -05:00
Bob Kuhn
ba91bca1eb
TMC SPI daisy chain support (experimental) ( #15081 )
2019-08-30 17:39:45 -05:00
AlexandrZloy
0ebaea94be
Add stallGuard threshold for X2 ( #15042 )
2019-08-29 00:15:31 -05:00
Luu Lac
081e4506ca
Fix G53 as prefix, G28 with CNC_COORDINATE_SYSTEMS ( #15069 )
2019-08-28 04:20:28 -05:00
InsanityAutomation
b7796bcce6
Disable steppers on M112 ( #15065 )
...
And change verbiage to not refer to "Emergency Stop."
2019-08-28 00:51:01 -05:00
InsanityAutomation
f218405c36
Fix ExtUI invalid speed, timer ( #15031 )
2019-08-25 04:46:02 -05:00
Tanguy Pruvot
e604f76703
Enable contrast via LCD_CONTRAST_INIT ( #15006 )
2019-08-21 18:56:39 -05:00
InsanityAutomation
33f6d77281
Adjust homing backoff feedrate ( #14972 )
2019-08-20 03:44:52 -05:00
MaukCC
8664b8e97b
Adding HMS434 machine ( #14931 )
2019-08-20 03:40:48 -05:00
Ludy
05995d1fd6
Unify buzz methods as MarlinUI::buzz ( #14803 )
2019-08-20 02:01:37 -05:00
Scott Lahteine
17cd1a4f26
Tweak TOUCH_MI_DEPLOY_XPOS block
2019-08-18 23:38:12 -05:00
Tim Moore
cd09e35f90
Remove extra M503 "M412" report ( #14985 )
2019-08-18 21:17:00 -05:00
InsanityAutomation
af5a7a2925
Add missing ExtUI user confirmation ( #14992 )
2019-08-18 21:03:26 -05:00
Marcio Teixeira
8bdb3d9970
Add CONTROLLERFAN_SPEED_Z_ONLY ( #14956 )
2019-08-16 21:57:19 -05:00
AnHardt
587d4a6373
Repair display throttling ( #14960 )
2019-08-16 21:17:09 -05:00
Tim Moore
4575978a1f
Fix auto power for chamber fan ( #14922 )
2019-08-16 18:42:24 -05:00
Marcio Teixeira
274934ad81
Add LULZBOT_TOUCH_UI ( #14967 )
2019-08-16 18:34:13 -05:00
Eric Ptak
9c5086e6af
[STM32F1] Simpler Flash EEPROM ( #14829 )
2019-08-10 19:14:31 -05:00
Fourmi
eb3a3d249e
Fix TouchMI probe movement (left side) ( #14875 )
2019-08-08 02:40:48 -05:00
Ludy
528c9885f2
Fix wait_for_user + PAUSE_BEFORE_DEPLOY_STOW issue ( #14831 )
2019-08-08 01:52:20 -05:00
Tanguy Pruvot
92c35d14a4
Non-fatal error from ps::access_start ( #14845 )
2019-08-07 00:43:00 -05:00
Tim Moore
77f637763c
Overlord configs. Fix buzzer, redundant temp. ( #14833 )
2019-08-06 23:25:47 -05:00
Scott Lahteine
fc39c925ca
Grace period followup
2019-08-05 22:00:49 -05:00
Robby Candra
5bc2fb022c
THERMAL_PROTECTION_GRACE_PERIOD is obsolete ( #14798 )
2019-08-05 20:33:15 -05:00
teemuatlut
d4974ea719
TMC SPI Endstops and Improved Sensorless Homing ( #14044 )
2019-08-04 22:22:58 -05:00
Tim Moore
e3660bca25
Overlord printer thermistor ( #14815 )
2019-08-03 20:57:56 -05:00
mekius
7682751646
Fix HOME_BACKOFF_MM type ( #14805 )
2019-08-01 20:32:45 -05:00
InsanityAutomation
6f8b8c394d
Homing backoff per-axis / delta Z ( #14789 )
2019-07-31 20:50:23 -05:00
Scott Lahteine
c2b319360d
Remove extra pragmas
2019-07-30 20:19:47 -05:00
Eric Ptak
fdbc733376
Return 'false' on EEPROM connection fail ( #14776 )
2019-07-30 17:43:45 -05:00
InsanityAutomation
0b154c2d71
Enable runout sensor in EEPROM by default ( #14771 )
2019-07-30 05:01:56 -05:00
Scott Lahteine
eae543adf3
Apply HAS_SPI_LCD as needed
2019-07-29 18:55:05 -05:00
Marcio Teixeira
eefe3f595a
New options: Bootscreen as Info, game Easter-egg ( #13829 )
2019-07-28 22:47:20 -05:00
Ludy
c4bb458763
BUZZ cleanup ( #14760 )
2019-07-28 19:14:50 -05:00
mikeshub
1579091c20
PID loop improvements ( #14746 )
...
* Fix macro evaluation in `temperature.cpp`
* Improve bed PID, PID debug output
* Add min PID power define
2019-07-28 15:50:25 -05:00
Ludy
97e9c95f47
Fix & clean up ExtUI ( #14748 )
2019-07-27 22:44:05 -05:00
Fourmi
d34364a086
Default TOUCH_MI_DEPLOY_XPOS to min X ( #14736 )
2019-07-26 21:57:13 -05:00
Scott Lahteine
1088846cae
Cosmetic updates from 14044
2019-07-24 01:52:36 -05:00
Marcio Teixeira
369fb2806d
Fix compilation warnings, errors ( #14704 )
2019-07-22 20:08:54 -05:00
mikeshub
d9303b2137
Fix MAX6675_SEPARATE_SPI boot loop ( #14698 )
2019-07-21 21:36:00 -05:00
InsanityAutomation
dc6fa04f68
Fix single nozzle temp change, do slower extra prime ( #14696 )
2019-07-21 19:33:37 -05:00
InsanityAutomation
9cd66f6f77
Fix missing include & condition ( #14682 )
2019-07-20 01:55:34 -05:00
wookie666
00e2f6da8f
Improve magnetic dock switching toolhead ( #14663 )
2019-07-19 06:07:26 -05:00
Scott Lahteine
68108789d0
Add'l toolchange syncs
2019-07-18 02:44:21 -05:00
Scott Lahteine
fac0e63058
Clean up tool-change syncs ( #14666 )
2019-07-18 02:17:46 -05:00
Scott Lahteine
42b5ccafc9
Toss obsolete DEBUG_LEVELING_FEATURE tests
2019-07-17 20:26:48 -05:00
Marcio Teixeira
839255eed4
Fix for M504 changing filament runout value ( #14661 )
...
Fixes #14476
2019-07-17 19:11:45 -05:00
InsanityAutomation
b8cc61262f
Finish G12, update Nozzle::clean ( #14642 )
2019-07-17 04:23:19 -05:00
Marcio Teixeira
27c487bab7
Print progress enhancements ( #14647 )
2019-07-17 03:14:44 -05:00
Scott Lahteine
ef2a2eb984
Temp tweak
2019-07-17 02:03:25 -05:00
Tanguy Pruvot
45bde333d5
Initial Longer3D LK1/2 (Alfawise U20/U20+/U30) support ( #14597 )
2019-07-14 18:05:24 -05:00
Scott Lahteine
eaf1c0954e
Update some precompiler tests
2019-07-14 13:09:16 -05:00
InsanityAutomation
ce02c6cee2
Variable tool change purge ( #14618 )
2019-07-14 11:40:58 -05:00
Ludy
70586d3a6c
Update (c) comments ( #14584 )
2019-07-11 13:48:15 -05:00
Pavel4e5
8babf55b18
Init ADC keypad analog input ( #14585 )
2019-07-11 13:47:41 -05:00
Scott Lahteine
ad1c061e7b
Bring STM32F4/F7 together
2019-07-10 07:07:04 -05:00
Scott Lahteine
ed0e6afacb
Apply LIMIT macro
2019-07-10 03:35:39 -05:00
Scott Lahteine
5519054f50
Improve BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE ( #13740 )
2019-07-09 21:35:07 -05:00
Scott Lahteine
1a349c7522
Add HAS_TMC220x
2019-07-08 23:07:42 -05:00
Tanguy Pruvot
8873c583d3
Prevent extra settings.load on boot ( #14499 )
2019-07-05 22:25:59 -05:00
Vanessa Dannenberg
4fa8053638
RPW-Ultra thermistor table ( #14517 )
2019-07-05 20:37:05 -05:00
Scott Lahteine
fe02241044
NONE on combined options
2019-07-05 18:20:24 -05:00
Scott Lahteine
750a16ad38
Fix MIN/MAX function collision with macros
2019-07-05 18:14:02 -05:00
Scott Lahteine
b6546ea33a
Add include guards to some headers
2019-07-05 04:02:08 -05:00
Scott Lahteine
f7eeae8424
Indent a line
2019-07-02 21:34:40 -05:00
Scott Lahteine
720bc7c00b
Named indices for Temperature class ( #14479 )
2019-07-02 08:39:55 -05:00
Scott Lahteine
d4415dcf59
Fix analogWrite ambiguity
2019-07-02 04:36:02 -05:00
Scott Lahteine
c28e08c849
Fix mintemp/maxtemp monitoring for thermocouples
2019-07-01 10:24:53 -05:00
Aliaksei Kvitsinski
2f932a11b3
Park heads with electromagnet ( #14023 )
2019-07-01 05:55:23 -05:00
Tanguy Pruvot
24655a6bf3
Touch-MI Menu and Manual Deploy option ( #14290 )
2019-06-30 23:55:27 -05:00
Ludy
dab2f0c89c
Mask unused var, update (c) comments ( #14455 )
2019-06-30 22:29:33 -05:00
Scott Lahteine
d16954dc88
Make KEEPALIVE_STATE a scoped auto-restore ( #14446 )
2019-06-29 22:49:50 -05:00
Tanguy Pruvot
19aafb9050
Fix STM32F1 motor shocks (stepper timer issue) ( #14030 )
2019-06-29 04:39:38 -05:00
Scott Lahteine
c9a8db33c3
Fix scaledFanSpeed
2019-06-28 21:24:47 -05:00
Giuliano Zaro
a9445d557e
Remove extra #if ( #14439 )
2019-06-28 18:54:22 -05:00
Scott Lahteine
4d5a1984e2
Simplified fan handling code
2019-06-28 18:50:32 -05:00
Scott Lahteine
a8d68b7c8a
Common method for scaled fan speed
2019-06-28 15:34:17 -05:00
Scott Lahteine
9da02d2114
Help syntax highlighting (Sublime, et. al.)
2019-06-28 15:04:17 -05:00
Scott Lahteine
93cd66ac11
Tweaky change from (C) to (c)
2019-06-27 23:58:16 -05:00
Tim Moore
81209f5310
'M105 R' to report redundant temp sensor ( #14324 )
2019-06-27 21:29:52 -05:00
Tim Moore
8ce84fa44f
Add temperature-based auto power options ( #14397 )
2019-06-27 16:28:07 -05:00
Scott Lahteine
2580104c8b
Revert recent probe changes
...
- Revert "Fix FIX_MOUNTED_PROBE compile error (#14393 )"
- Revert "Fix G28 with non-BLTouch probes (#14381 )"
- Revert "Fix BLTOUCH deploy/stow in HS mode (#14352 )"
- Revert "Apply needed BLTouch patch (#14233 )"
Co-Authored-By: AnHardt <github@kitelab.de>
2019-06-26 05:33:43 -05:00
Scott Lahteine
49627069a5
Shorthand for home-after-deactivate
2019-06-26 03:47:55 -05:00
oechslein
8c55bd5451
Update "StallGuard threshold" heading ( #14395 )
2019-06-26 03:33:07 -05:00
Eric Ptak
8934b32f1b
Fysetc AIO II / Cheetah STM32F1 ( #14407 )
2019-06-26 00:40:29 -05:00
InsanityAutomation
aa0383a83b
Enhance IDEX toolchange auto-return w/ no park, full control ( #14117 )
2019-06-23 20:00:48 -05:00
BigIronGuru
f5afaaef5b
Fix probe.cpp warning ( #14367 )
2019-06-22 17:27:33 -05:00
teemuatlut
2247bf1ba5
Add missing dedge init for TMC2209 ( #14370 )
2019-06-22 17:00:15 -05:00
mikeshub
1db7013e3b
Fix and improve PID loops ( #14373 )
...
- Windup guarding was missing. The kludge in place of windup guard is removed. D term filter calculations are simplified to require fewer `float` calculations. Sign change for D term output to make debugging output clearer.
- Use "no overshoot" for bed PID tuning.
2019-06-22 16:52:56 -05:00
MrMabulous
c41b005f33
Add Extra Probing option, discarding outliers ( #14338 )
2019-06-21 19:02:26 -05:00
BigIronGuru
8f99d45045
Fix BLTOUCH deploy/stow in HS mode ( #14352 )
2019-06-21 18:55:27 -05:00
Tanguy Pruvot
52383633e7
STM32F1: M43 PINS_DEBUGGING ( #14072 )
2019-06-21 01:20:17 -05:00
Scott Lahteine
4df4c47994
Add TMC2209 support ( #14249 )
2019-06-20 15:47:50 -05:00
Scott Lahteine
4c872a01f2
G-code queue singleton, front injection ( #14236 )
2019-06-19 00:00:19 -05:00
Ludy
2290b269dc
Unused variable ( #14301 )
2019-06-18 00:15:41 -05:00
Tanguy Pruvot
f2cfa408b7
Touch-MI probe by hotends.fr ( #14101 )
...
A simple Z probe using a magnet to deploy a probe. See https://youtu.be/E7Ik9PbKPl0 for the sensor description...
2019-06-14 22:19:48 -05:00
teemuatlut
29afd11cbf
Updates for TMC2660 init ( #14245 )
2019-06-13 23:16:10 -05:00
teemuatlut
12a270fd29
Fix TMC5160 and TMC2160 PWMCONF init
2019-06-13 20:57:12 -05:00
Scott Lahteine
fc73a8b004
Add AXIS_HAS_SQUARE_WAVE shorthand
2019-06-13 20:57:12 -05:00
mikeshub
a3f034b95e
FFCP updates. Update XY soft endstops on tool_change ( #14125 )
2019-06-10 18:01:42 -05:00
Scott Lahteine
0ca2073625
ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED => SD_ABORT_ON_ENDSTOP_HIT
2019-06-10 17:28:35 -05:00
teemuatlut
cccc51ee0e
TMC Square Wave Stepping mode ( #14195 )
2019-06-09 05:08:05 -05:00
BigIronGuru
293018f76c
Apply needed BLTouch patch ( #14233 )
2019-06-07 21:43:20 -05:00
Scott Lahteine
858b2fa21a
Fix thermistor table
2019-06-05 21:39:39 -05:00
InsanityAutomation
f6ec00d776
Update thermistor and working config
2019-06-04 20:25:00 -04:00
Scott Lahteine
93ab16c6e4
Remove old mixing ISR comment
2019-05-30 17:05:16 -05:00
Scott Lahteine
6572848d7f
Fix stepper timing bug
2019-05-30 16:58:53 -05:00
Ludy
bd494a6bd6
Update defines for patched temperature macros ( #14161 )
2019-05-28 17:43:31 -05:00
doggyfan
e09d8811c1
Apply grace period to thermistor failure testing ( #14167 )
2019-05-28 15:36:03 -05:00
teemuatlut
bf4a0db97f
TMC LCD followup ( #14134 )
2019-05-27 21:24:20 -05:00
Scott Lahteine
605ec0a478
Fix thermistor table warning
2019-05-26 01:30:20 -05:00
InsanityAutomation
49e83dd7c8
BLTouch V3.1 changes ( #14104 )
2019-05-25 21:56:47 -05:00
teemuatlut
1c86fbc60b
TMC updates, capture LCD changes ( #14074 )
2019-05-25 18:22:12 -05:00
Scott Lahteine
48d1bd29cb
Shift m before compare to 0
2019-05-25 15:22:15 -05:00
doggyfan
594f6b14be
Limit user thermistor to 999, fix thermistor table macro ( #14080 )
2019-05-21 21:31:05 -05:00
Scott Lahteine
aeec9ef76b
Update backlash code
2019-05-20 21:34:08 -05:00
Pavel4e5
3cd19a8ec0
Improve Zonestar keypad responsiveness ( #14056 )
2019-05-18 20:52:55 -05:00
FanDjango
85fb33a060
BLTOUCH tweaks, new v3.1 command ( #14015 )
2019-05-17 19:10:18 -05:00
InsanityAutomation
06f3273531
Fix DELTA pulse wait bug ( #14028 )
2019-05-17 16:16:56 -05:00
Scott Lahteine
785c01f2bc
Use US spelling of 'behavior'
2019-05-15 01:49:17 -05:00
chai-md
940ff8e7c8
Improve LV8729 stepping ( #13776 )
2019-05-11 19:02:19 -05:00
InsanityAutomation
5108e4b6aa
Cleaner EEPROM auto init ( #13975 )
2019-05-11 16:54:03 -05:00
Scott Lahteine
ad4ffa1d2f
Use C++ language supported 'nullptr' ( #13944 )
2019-05-09 11:45:55 -05:00
InsanityAutomation
6811e2921b
BLTouch v3 / 3DTouch Interoperability & performance ( #13814 )
2019-05-07 21:25:54 -05:00
InsanityAutomation
5dcb25664f
Option to Auto-Initialize EEPROM ( #13935 )
2019-05-07 16:30:31 -05:00
Ludy
a504366138
Fix probe fan compiling error ( #13930 )
2019-05-07 14:14:12 -05:00
Stephan
483822f3aa
Fix some THERMAL_PROTECTION_CHAMBER issues ( #13678 )
2019-05-06 19:55:01 -05:00
doggyfan
23a8707ef1
Configurable Thermistor ( #13888 )
2019-05-06 18:51:06 -05:00
Scott Lahteine
9853331b34
Fix temp init, loosen ADC grace period
2019-05-05 22:55:03 -05:00
Giuliano Zaro
e2a77ed881
Bring chamber temp to completion ( #13837 )
2019-05-04 22:51:47 -05:00
Tanguy Pruvot
7da63fa03f
Fix NOMORE() sign warning in stepper ( #13894 )
2019-05-04 15:59:38 -05:00
InsanityAutomation
3fcab8dbf1
Option to disable fans during pause ( #13820 )
2019-05-04 15:50:44 -05:00
Scott Lahteine
2f32a6612d
Clean up Temperature::set_fans_paused
2019-05-04 14:36:59 -05:00
Marcio Teixeira
15357af67c
Backlash cleanup ( #13659 )
...
…And save backlash, fil. sensor, ExtUI userdata to EEPROM.
2019-05-03 23:53:15 -05:00
Tanguy Pruvot
e5438a9a03
settings: store runout sensor on/off ( #13876 )
2019-05-02 00:47:26 -05:00
Thomas Moore
ee243e4edf
Fix mixing extruder filament change ( #13803 )
2019-05-01 21:55:58 -05:00
Scott Lahteine
5051909c3c
Update do_select_screen for general use ( #13800 )
2019-04-24 10:13:44 -05:00
InsanityAutomation
c6632925e3
Force no move on IDEX full control mode ( #13797 )
2019-04-23 15:20:59 -05:00
chai-md
78d7349fd7
Remove extra Z raises in tool change ( #13782 )
2019-04-21 21:06:46 -05:00
Kajetan Rzepecki
875e673a8c
Add HAL-based thermal protection grace period for all heaters ( #13778 )
2019-04-21 20:50:32 -05:00
Kajetan Rzepecki
5f70c876ae
Fix _temp_error-related compile error ( #13768 )
2019-04-20 13:57:38 -05:00
Scott Lahteine
bddb776ddb
Add chamber max-temp check
...
Followup to #13756
2019-04-19 22:18:55 -05:00
Marcio Teixeira
d0c1eee53b
Add extra max-temp safety checks ( #13756 )
2019-04-19 21:37:12 -05:00
Robby Candra
e8dc87a2b7
Fix updated Allen Key pause probe logic ( #13723 )
2019-04-16 12:35:58 -05:00
Robby Candra
7ca1fea22b
Option to pause probe deployment only when triggered, for manually-deployed allen-key probe ( #13698 )
2019-04-16 01:32:43 -05:00
Stephan
84273557f9
Move and update heated chamber settings ( #13671 )
...
Co-Authored-By: the-real-orca <stephan.veigl@gmail.com>
2019-04-12 15:38:10 -05:00
chai-md
2adc37becc
MAGNETIC_SWITCHING_TOOLHEAD ( #13629 )
2019-04-11 13:29:17 -05:00
InsanityAutomation
4900c28bf6
Fix IDEX tool-change, and more ( #13614 )
2019-04-09 18:33:40 -05:00
Scott Lahteine
fae2b7edc3
Update MMU2 code style
2019-04-08 18:13:42 -05:00
Roxy-3D
9cee81d47e
Option to show babysteps total since G28 ( #13580 )
2019-04-06 18:04:34 -05:00
VBen
0dfd76ba55
Fix Z hotend offset broken by parking extruder tool change ( #13582 )
2019-04-05 15:28:32 -05:00
Scott Lahteine
240ea1bbb3
Split up games into separate files
2019-04-04 03:06:19 -05:00
InsanityAutomation
d44e5b1fde
Fix stepper direction macros, multi-nozzle scope ( #13569 )
2019-04-04 02:44:07 -05:00
Kajetan Rzepecki
2cfa9e9008
Fixed chamber-related compile error ( #13552 )
2019-04-01 17:53:56 -05:00
Kajetan Rzepecki
c9079165ee
Fix MAX6675 readout with Hardware SPI ( #13530 )
2019-03-30 22:31:49 -05:00
Marcio Teixeira
5679fae11e
UltraLCD enhancements (lower fan resolution, backlash menu) ( #13519 )
2019-03-29 14:07:43 -05:00
Ludy
fe346cd4d1
Fix DEBUG_EEPROM_READWRITE compile error ( #13492 )
2019-03-26 04:12:22 -05:00
Sam Lane
e3ab54753b
Add extra Linear Advance factors ( #13490 )
2019-03-26 04:02:27 -05:00
Chris Pepper
ffc2c2d7c5
Move FAST_PWM_FAN code to HALs ( #13491 )
2019-03-26 01:03:23 -05:00
Scott Lahteine
380c771988
Handle word-padded flash-based eeprom (STM32F1)
...
Fix #13445
2019-03-24 19:14:04 -05:00
Sam Lane
a8fa275dc6
Fix Fan 0 responding to all fan speeds ( #13444 )
2019-03-23 23:00:31 -05:00
InsanityAutomation
691e5c3bb8
BLTouch V3.0 support ( #13406 )
2019-03-17 05:57:25 -05:00
Scott Lahteine
49cf92dc36
Extended condition macros ( #13419 )
...
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
2019-03-16 23:43:06 -05:00
Ludy
59353546e8
Fix BUTTON_EXISTS and misplaced comma ( #13411 )
...
Fixes #13410 and redeclaration of `BUTTON_EXISTS`
2019-03-16 11:59:12 -05:00
InsanityAutomation
09eb30dc05
IDEX Mirror mode based on Formbot / Vivedino Symmetric mode ( #13404 )
2019-03-15 22:46:27 -05:00
Scott Lahteine
5c1aa5162d
Adjust M206 output in M503 for DELTA
2019-03-15 19:20:40 -05:00
Scott Lahteine
9a515cbd32
Fix Pause Print message and behavior ( #13394 )
2019-03-14 02:26:07 -05:00
Scott Lahteine
f5bcc00570
Unify debugging output with debug_out.h ( #13388 )
2019-03-14 02:25:42 -05:00
Scott Lahteine
67bee06e43
No patch needed for non-libmaple analogWrite
...
See https://github.com/pinchies/Marlin/pull/1#issuecomment-471388743
2019-03-13 07:21:10 -05:00
Scott Lahteine
f89b375fb9
Fixes and improvements for PWM pins ( #13383 )
2019-03-13 06:51:15 -05:00
Scott Lahteine
87162658c4
Fix and improve software endstops ( #13386 )
2019-03-13 05:48:36 -05:00
Scott Lahteine
a5ea3e2f15
Fix hotend offset on switching toolhead change
...
See commentary at #11623
2019-03-13 05:32:21 -05:00
InsanityAutomation
050eac03af
Single X Duplication Extension ( #13373 )
...
* Multi-nozzle selective duplication
* Use a bit-mask, reduce stepper_indirection.h size
* Tweak the multi-nozzle duplication description
* Use 'S' as a bool in M605
* Add HAS_DUPLICATION_MODE conditional
* Remove '_MODE' from the option name
* M605 in the style of Stacker M280
* Also include direct mask style (P)
2019-03-13 00:42:50 -05:00
Scott Lahteine
11d6a939df
Always define axis_unhomed_err
2019-03-11 20:58:27 -05:00
Scott Lahteine
0375e92847
Followup to serial rework
...
As mentioned in #13370
2019-03-11 16:46:04 -05:00
Scott Lahteine
e52bcc9408
Limit top bed temp to BED_MAXTEMP - 10
...
The chances of a 10° overshoot is pretty minimal.
2019-03-11 16:32:34 -05:00
Scott Lahteine
1f7e220387
Make HAL ISR macros function-like
2019-03-10 20:44:27 -05:00
Scott Lahteine
3419099f0a
Clean up whitespace
2019-03-10 19:09:28 -05:00
Michiel Baird
b824a517aa
Add G38.4 and G38.5 ( #13348 )
2019-03-10 17:22:09 -05:00
MoellerDi
c36989c39e
Fix chamber temperature measurement ( #13350 )
2019-03-10 09:51:13 -05:00
Scott Lahteine
33a08fc6f7
Fix typos from temperature rework
...
Followup to #12201
2019-03-10 08:28:16 -05:00
Marcio Teixeira
00fc43144a
Follow up fixes to various PRs. ( #13334 )
...
- Ensure `MarlinUI:get_progress` is defined for `ExtUI`.
- Fix for `BACKLASH_SMOOTHING` with small segments.
`BACKLASH_SMOOTHING` with extremely small segments failed to fully correct due to the correction factor being rounded down. Rounding up ensures the entire backlash will converge to zero even for small segments.
- Add pinout for the beta revision `EINSY_RETRO`.
- Update soft endstops with tool offsets (for toolchange et. al. move clamping) (#12568 )
2019-03-09 14:20:37 -06:00
Reece Kibble
dbead66988
Allows user to set (almost) any PWM frequency ( #12638 )
2019-03-08 02:15:42 -06:00
3dlabsio
645ca7af7a
M141 Heated Chamber, Temperature rework ( #12201 )
2019-03-07 02:09:39 -06:00
Scott Lahteine
44571775bd
Further support for 6 extruders
2019-03-07 01:00:56 -06:00
Scott Lahteine
cfdb38eda4
Allow SERIAL_ECHOPAIR to take up to 12 pairs ( #13311 )
2019-03-05 06:46:19 -06:00
Scott Lahteine
15738ea506
Update a motion comment
2019-03-05 00:50:29 -06:00
Scott Lahteine
bc87e97357
Prevent a tool change move out of bounds
2019-03-05 00:50:29 -06:00
Scott Lahteine
2212da453a
Distinguish between analog/digital auto fans ( #13298 )
2019-03-05 00:41:31 -06:00
Chris Pepper
38bef9da91
Report auto temp to both serial ports, if available ( #13301 )
2019-03-03 21:03:48 -06:00
Robert Mendon
367d392880
Init stepper current after stepper pins are set up ( #13302 )
2019-03-03 20:58:02 -06:00
Scott Lahteine
599cdc3f0f
Remove dead code from get_pid_output
...
See #12981
2019-03-03 05:45:20 -06:00
Vasily Evseenko
71773b128d
Fix stepper use before init. Add Ultimaker2+ Extended clone config ( #13284 )
2019-03-02 17:29:02 -06:00
kAdonis
05c2f80826
Fix bug in wait-for-heatup ( #13290 )
2019-03-02 16:29:10 -06:00
Scott Lahteine
fa236e9718
General cleanup ahead of L64XX
2019-03-01 19:58:07 -06:00
Scott Lahteine
2f1e1dcb42
Gradual step towards EXTRUDERS 0 support
2019-03-01 01:51:24 -06:00
Scott Lahteine
99d0022fae
Drop the Z_MIN_PROBE_ENDSTOP option ( #13276 )
2019-03-01 00:27:45 -06:00
Scott Lahteine
a2e3226597
Init XYZ to configured home position
2019-02-28 22:10:26 -06:00
InsanityAutomation
e2e2a55d9b
Add thermistor type 67 SliceEng ( #13275 )
2019-02-28 19:44:17 -06:00
Scott Lahteine
7fde3ed915
Skip hysteresis check when temp is already close to target
...
To eliminate a long delay during pause, park, and filament change
2019-02-28 14:35:19 -06:00
InsanityAutomation
eb4bf93ea4
Add more Babystep options ( #13262 )
2019-02-27 04:38:56 -06:00
Bob Kuhn
ddbe4cfa20
Printrboard G2 support ( #13116 )
2019-02-26 21:03:13 -06:00
Giuliano Zaro
2616e4d4d9
Remove duplicated 'chitchat' defines ( #13258 )
2019-02-25 16:13:01 -06:00
Scott Lahteine
5d28575d4d
Clean up some motion code
2019-02-25 16:01:42 -06:00
Scott Lahteine
808b076000
Update some ABL/UBL conditionals
2019-02-25 16:01:42 -06:00
Scott Lahteine
64253e1a58
Followup to serial reform
...
Reference #13250
2019-02-25 00:20:36 -06:00
Scott Lahteine
e15354e387
Simplify serial port redirect ( #13234 )
2019-02-23 22:53:01 -06:00
Scott Lahteine
02fec89a0d
Turn fans off in zero_fan_speeds
...
Addressing #13231
2019-02-22 21:00:44 -06:00
Scott Lahteine
3c9a7926c2
Fix compile error with JUNCTION_DEVIATION
...
See #13000
2019-02-20 04:54:26 -06:00
LinFor
ba39186364
TMC_DEBUG optimization and improvements ( #13135 )
2019-02-20 02:22:42 -06:00
Roman Moravčík
208ab8b366
Fix compilation with one service interval ( #13185 )
2019-02-17 12:32:47 -06:00
Scott Lahteine
be9a409980
Fix M125 XY parameters, export get_homing_bump_feedrate
2019-02-14 05:25:46 -06:00
Scott Lahteine
ce40c2e87c
Use do_blocking_move_to(ref, fr)
2019-02-14 02:22:08 -06:00
Scott Lahteine
7cf9b93f26
Add HAS_FILAMENT_SENSOR ahead of 12962
2019-02-12 20:13:20 -06:00
revilor
e56c13670d
Service interval watchdog ( #13105 )
2019-02-12 15:58:56 -06:00
InsanityAutomation
7f1b69b0c8
Add HOST_PROMPT_SUPPORT ( #13039 )
2019-02-12 15:55:47 -06:00
Scott Lahteine
0feeef2604
Update copyright in headers
2019-02-12 15:30:11 -06:00
Scott Lahteine
894f5c24a8
Fix trailing whitespace
2019-02-12 14:25:57 -06:00
Giuliano Zaro
773fa5c40f
Fix define used when PID is off ( #13119 )
...
Replaced `PID_MAX` with `BANG_MAX` since it should be the correct define to be used when PID is not enabled.
2019-02-11 17:29:17 -06:00
Simon Jouet
5cd0fa3ce1
Basic GPIO expander using the ESP32 I2S peripheral ( #12959 )
2019-02-10 05:40:31 -06:00
Scott Lahteine
6de3d34378
M166 Gradients, LCD Menu for 2-channel Mixer (Geeetech A10M/A20M) ( #13022 )
2019-02-10 04:54:23 -06:00
LinFor
7ee35c2611
PID_MENU option to save PROGMEM in LCD menus ( #13095 )
2019-02-10 04:03:18 -06:00
AnHardt
0e37fe8776
Apply minimum C in M303 ( #13113 )
...
Apply minimum `C` in `M303`. `PID_autotune()` needs to be called with a 'C'ycles-parameter >2 to give meaningful (different from 0) PID-factors. Therefore silently raise C to 3. Fixing one aspect of #13104
2019-02-10 03:54:45 -06:00
Marcio Teixeira
e1604198ff
G425 — Auto-calibrate Backlash and Nozzle Offsets ( #13050 )
2019-02-06 17:20:17 -06:00
InsanityAutomation
413e303ad5
More Advanced Pause options ( #12984 )
2019-02-06 06:39:42 -06:00
teemuatlut
d81342254a
Support new TMC drivers ( #13026 )
2019-02-06 06:33:14 -06:00
Rolf Werum
524c6c10bf
MAGNETIC_PARKING_EXTRUDER ( #12351 )
2019-02-06 06:30:53 -06:00
Scott Lahteine
1bd9a63049
Add HAS_EXTRA_ENDSTOPS macro
2019-02-06 05:10:05 -06:00
Scott Lahteine
3c49396370
Fix compile error with DUE + MAX6675 ( #13086 )
2019-02-05 22:56:13 -06:00
Sam Lane
b35a7c2c87
Fixed closed-loop planner stall ( #13005 )
2019-02-04 07:43:09 -06:00
Nathan
df1043516e
Fix the delta homing issue ( #12974 )
2019-02-04 05:25:50 -06:00
Scott Lahteine
4200bd2fc1
Report on M92 with no arguments ( #12833 )
2019-02-04 05:24:15 -06:00
Scott Lahteine
d4d1b28a06
Fix some include paths
2019-02-04 03:57:15 -06:00
Marcio Teixeira
5cfc1cdacc
Support SWITCHING_NOZZLE with 2 servos ( #13054 )
2019-02-04 00:19:56 -06:00
Nicolas G
6fb4001b58
Add option to disable fan speed slowing in M303 ( #13066 )
2019-02-04 00:12:41 -06:00
Mark Zachmann
4d1093b386
Fix init of last_direction_bits ( #13067 )
2019-02-03 01:29:00 -06:00
Scott Lahteine
4fa1c52688
Tweak serial output code
2019-02-03 01:09:14 -06:00
Scott Lahteine
a5e3384691
Pre-apply cosmetic changes to mixing
2019-02-03 01:09:14 -06:00
Scott Lahteine
0358ffcd4c
Drop E element from homing_feedrate_mm_s
2019-02-02 15:55:00 -06:00
Scott Lahteine
95223cb28e
Remove dead code from stepper.h
...
These values are always supplied by `Conditionals_post.h`.
2019-02-02 15:35:05 -06:00
mattfredwill
c3cb449990
TMC2130 dual-stepper Sensorless Homing ( #13061 )
2019-02-01 18:09:01 -06:00
revilor
6a57d0b381
Prusa MMU2 ( #12967 )
2019-01-31 19:10:52 -06:00
jeffstaley
0da636e1a3
Set correct stepper direction on reset ( #13032 )
...
On a reset steppers were being initialized to incorrect direction. Original code wasn't respecting `INVERT_Z_DIR` define.
2019-01-27 23:02:38 -06:00
Jiri
24fffb8d93
Fix undefined lcd_tmpfan_speed on NO_LCD_MENUS ( #13006 )
2019-01-24 16:34:40 -06:00
InsanityAutomation
f4d1f13358
Warn on cold extrusion, dont error
2019-01-24 00:16:14 -06:00
Bob Kuhn
2f35747f29
L6470 SPI daisy chain support ( #12895 )
2019-01-23 19:06:54 -06:00
Ludy
dc65d96aca
Fix TMC compile error ( #12965 )
2019-01-20 23:47:28 -06:00
Scott Lahteine
0495fcd475
Minor spacing fix
2019-01-20 00:10:50 -06:00
teemuatlut
8a3f1d6932
Fix chopper timing struct and initialization ( #12943 )
2019-01-19 18:57:02 -06:00
Ludy
acf266fe78
Fix a compile warning, etc. ( #12955 )
2019-01-19 18:47:29 -06:00
Scott Lahteine
712e23c383
Fix up some whitespace
2019-01-17 18:05:36 -06:00
teemuatlut
e6805582a6
M569 to change stepping mode. Add new TMC section to LCD. ( #12884 )
2019-01-17 13:17:16 -06:00
mikeshub
7fde8d9d1e
Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support ( #12855 )
...
- Fix a bug in MAXxxxx thermocouple temp reporting.
- Add support for 3-wire HD44780.
- Add support for PCA9533 RGB driver.
- Add configuration examples for FlashForge CreatorPro.
2019-01-14 14:29:55 -06:00
InsanityAutomation
082f6a27de
ADAPTIVE_FAN_SLOWING extension to hotend thermal protection ( #12853 )
2019-01-12 00:41:48 -06:00
Scott Lahteine
459f4fef60
Fix Temperature::init bug with HEATER_4_PIN
2019-01-11 22:54:26 -06:00
Scott Lahteine
19fea772e5
Use E_AXIS_N where it makes sense
2019-01-11 19:42:34 -06:00
HackingGulliver
1fd8e2c649
Fix: Junction Deviation calculates wrong cos(theta) on CoreXY ( #12879 )
2019-01-11 19:25:48 -06:00
Marcio Teixeira
6a8fb0f25f
Simplify backlash compensation code. ( #12813 )
...
- Use `TEST(dm,axis)` to determine directions instead of doing comparisons.
- Remove recomputation of `millimeters` and `delta_mm` since backlash compensation should not affect the distance over which material is extruded.
2019-01-04 13:30:56 -06:00
Marcio Teixeira
81e753064a
Fix ExtUI compile warnings and error ( #12799 )
2019-01-03 08:36:43 -06:00
TheLongAndOnly
cb643d87df
Adding missing code for triple Z-stepper auto-align ( #12786 )
2019-01-01 18:22:04 -06:00
Marcio Teixeira
60cb36bef3
Misc. improvements ( #12747 )
...
* Make ExtUI respect MAXTEMP limits
- Temperatures are now clamped by MAXTEMP limits rather than arbitrary values.
* Speed up USB init, add status
- Speed up USB initialization
- Show status message if init failed
* Enable status messages for EXTENSIBLE_UI
* Adjust max limit to MAX_TEMP - 15
* Misc. tweaks to formatting, const, etc.
2019-01-01 15:17:48 -06:00
Scott Lahteine
371d9a1acf
Fix line-endings, formatting, whitespace
...
Followup to #12770
2018-12-30 15:38:20 -06:00
Ludy
135c74017c
Fix compile DEBUG_EEPROM_READWRITE error ( #12746 )
2018-12-30 11:37:20 -06:00
Ludy
3877bf9704
Fix compile error with delta and sensorless homing ( #12740 )
2018-12-27 17:51:22 -06:00
Ludy
cfc5e96b4b
Move JD to Config.h (and fix jerk->eeprom bug) ( #12720 )
2018-12-27 15:29:39 -06:00
Roman Moravčík
594898aea7
Limit hotend / bed temperature to maxtemp-15 ( #12713 )
2018-12-27 11:46:05 -06:00
InsanityAutomation
367a9f65aa
Add Formbot 350c Thermistor ( #12661 )
2018-12-20 17:04:17 -06:00
Scott Lahteine
9d59a9c840
Followup to #12691 (typo)
2018-12-20 16:38:32 -06:00
Roman Moravčík
98cf546771
Limit set hotend temperature to maxtemp. ( #12690 )
2018-12-20 15:56:37 -06:00
Roman Moravčík
4dad489a50
[2.0.x] Limit PID autotune target to maxtemp-15 ( #12691 )
2018-12-20 15:55:30 -06:00
Marcio Teixeira
8dcc28c9ae
Squelch warning mentioned in #11061 ( #12676 )
2018-12-20 15:34:24 -06:00
Luc Van Daele
c6e09c2689
[2.0.x] G33 clean up ( #12648 )
...
Remove obsolete workarounds in G33 for the now fixed zprobe_zoffset bug
2018-12-18 12:43:38 -06:00
teemuatlut
55144284c2
TMC connection test, spreadCycle parameters, improved debugging ( #12616 )
2018-12-09 20:54:48 -06:00
Scott Lahteine
6cf8d40f41
Fix some serial echos of pin states
2018-12-09 02:38:32 -06:00
Scott Lahteine
e8bda62d2a
Followup to servo angles patch
...
Fix #12594
2018-12-08 15:31:59 -06:00
Marcio Teixeira
b22716e938
M425 Backlash Correction ( #11061 )
2018-12-08 14:36:46 -06:00
teemuatlut
50b2fbd031
Trinamic: Split stealthChop, improve driver monitoring, etc. ( #12582 )
2018-12-07 15:34:21 -06:00
Scott Lahteine
e874f9664c
Tweaks to endstops code
2018-11-30 14:25:55 -06:00
Scott Lahteine
3c58b16c9f
Move stepper enable/disable to stepper_indirection.h ( #12562 )
2018-11-30 12:48:46 -06:00
Scott Lahteine
aaf862aef2
Fix angles for disabled EDITABLE_SERVO_ANGLES ( #12559 )
2018-11-30 12:31:42 -06:00
Scott Lahteine
c986239837
A single SERIAL_ECHO macro type ( #12557 )
2018-11-29 16:58:58 -06:00
Jacob Jordan
8be91677df
Fix Skew factors ( #12555 )
...
- Ensure Skew factors are calculated from test square measurements
2018-11-29 11:39:31 -06:00
Scott Lahteine
03ef2d6c82
Fix "paused" message and M125 called by M25 ( #12551 )
2018-11-28 19:28:31 -06:00
Scott Lahteine
95d154a91f
Fans loop macro
2018-11-28 16:45:08 -06:00
Scott Lahteine
09d6db491a
Fix wait_for_bed compile error
2018-11-25 18:05:41 -06:00
Scott Lahteine
29c53f2402
Hide some compile warnings
2018-11-23 21:07:38 -06:00
Scott Lahteine
caca3c8503
Use wait_for_bed with WAIT_FOR_BED_HEATER
...
Addressing #12517
2018-11-23 20:39:23 -06:00
Sinisa Culic
8a0992d921
Fast PWM for controller fan ( #12485 )
2018-11-23 16:03:39 -06:00
Marcio Teixeira
4bcb63b705
Fix for #12482 ( #12483 )
...
Fix Z-move to uninitialized position in SWITCHING_EXTRUDERS tool_change (no_move=true)
2018-11-20 00:04:11 -06:00
Ludy
90a58488b5
Corrected unused var, default switch, Travis tests ( #12477 )
2018-11-19 23:59:48 -06:00
Ludy
1f93d2bcf7
Fix LCD compile error, etc. ( #12472 )
2018-11-18 20:39:49 -06:00
Marcio Teixeira
c1e17037e5
Various fixes for MarlinUI and ExtUI ( #12439 )
2018-11-17 22:21:44 -06:00
Giuliano Zaro
d3605cfc26
Don't start watching heaters when target is 0 ( #12453 )
2018-11-17 21:53:52 -06:00
Ludy
22d7fed60a
Fix compile error with SD_FIRMWARE_UPDATE ( #12462 )
2018-11-17 21:13:36 -06:00
Scott Lahteine
d97e31db4c
Optimize Power-Loss Recovery ( #12440 )
2018-11-16 20:47:07 -06:00
Mateusz Krawczuk
ca21ac6b9b
Support two MAX6675 thermocouples ( #8686 )
2018-11-16 18:20:33 -06:00
Scott Lahteine
7a075a5dc9
Tweak extruder errors
2018-11-16 01:32:21 -06:00
Scott Lahteine
d2bb53702a
Optimize target_extruder, ignore T with mixing ( #12432 )
...
* Optimize target_extruder, ignore T with mixing
* Give G-code Tn parity with tool_change
2018-11-14 17:33:04 -06:00
Scott Lahteine
d82c350de7
Miscellaneous LCD code renaming, reordering ( #12430 )
...
* Move special characters to language.h
* Apply some naming standards
* Clean up menu item draw functions
* Rename some Temperature methods
* UI => ExtUI
2018-11-14 13:13:51 -06:00
Scott Lahteine
edfd106bc5
Rejigger Filament Runout class ( #12428 )
2018-11-14 11:45:57 -06:00
Ryan
052d102ded
UltiMachine Archim 1 support ( #12404 )
2018-11-14 00:27:39 -06:00
Giuliano Zaro
98c2fc4e42
Endstops fix followup ( #12423 )
...
Followup to #12413
2018-11-13 17:10:07 -06:00
AnHardt
9ad3aed0ef
Fix tool-change for MIXING_EXTRUDER with < 2 virtual tools ( #12417 )
...
Fix #12416
Better handling of `ENABLED(MIXING_EXTRUDER) && !MIXING_VIRTUAL_TOOLS > 1` - to not fall through to the general case. Fix compiler warnings for `#elif EXTRUDERS < 2`.
2018-11-13 04:56:10 -06:00
Giuliano Zaro
d631267548
Refine endstops fixes ( #12413 )
...
When endstops/probe are enabled `ENDSTOP_NOISE_THRESHOLD` calls to `update` are required to properly re-sync endstops/probe status.
2018-11-13 04:31:58 -06:00
Scott Lahteine
a0c795b097
Encapsulate common display code in a singleton ( #12395 )
...
* Encapsulate common LCD code in a singleton
* Depend more UBL code on UBL_DEVEL_DEBUGGING
- Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 12:16:24 -06:00
Scott Lahteine
9da6809ac3
Adjust some comment spacing
2018-11-11 11:28:50 -06:00
Scott Lahteine
6093df11dc
Allow G26 to use the active extruder ( #12387 )
...
* Make lcd_quick_feedback argument optional
* Add click_to_cancel option to wait_for_hotend/bed
* Have G26 use the active nozzle and wait_for_hotend/bed
* Use wait_for_release in UBL G29
* Add 'T' parameter to G26 for an initial tool-change
2018-11-10 18:07:38 -06:00
Giuliano Zaro
fd7fd55662
Solve endstops issues ( #12382 )
...
- Partially reverts #11900 and tries to solve #12336
2018-11-09 14:58:04 -06:00
InsanityAutomation
7665dff58b
No error on T0 with single-extruder and fix MIXING_EXTRUDER virtual tools ( #12375 )
2018-11-09 00:15:07 -06:00
Scott Lahteine
525ea554a1
Remove obsolete comments
2018-11-08 10:55:18 -06:00
Scott Lahteine
ef724edd80
Apply HAS_LCD_MENU in EEPROM code
2018-11-08 10:03:05 -06:00
Scott Lahteine
81b1e9d272
Fix up xdiff, ydiff, zdiff in tool change
...
Followup to #12137
2018-11-06 22:56:33 -06:00
InsanityAutomation
6471a75a22
Combine more tool-change variables ( #12137 )
2018-11-06 22:22:20 -06:00
Scott Lahteine
4f72e041f2
Use card.stopSDPrint() for completeness
2018-11-06 20:55:17 -06:00
Scott Lahteine
5a470d4a49
Apply some tool-change cleanup
2018-11-06 18:20:01 -06:00
Scott Lahteine
5182eaf661
Fix endstops enable behavior during probing
...
Fix a bug introduced in #9582
2018-11-05 04:17:37 -06:00
Scott Lahteine
e0956bb572
Drop 'register' storage specifier
2018-11-04 16:17:13 -06:00
Scott Lahteine
c04cf127f7
Fix EEPROM servo angles init, section grouping
2018-11-04 16:14:54 -06:00
Scott Lahteine
b7ca93ba37
Remove dead comment
2018-11-04 06:10:35 -06:00
Hannes Brandstätter-Müller
67b22760d9
Return to status to show manual deploy/stow messages ( #12324 )
2018-11-04 04:51:26 -06:00
Scott Lahteine
f5eab912ed
Apply #pragma once, misc cleanup ( #12322 )
...
* Apply #pragma once in headers
* Adjust some thermistors formatting
* Misc cleanup and formatting
2018-11-04 02:25:55 -06:00
Scott Lahteine
d1ff22b983
Revive SCARA's home offset (unimplemented)
2018-11-03 06:24:41 -05:00
Scott Lahteine
2c9586be0c
Clear up HAS_WORKSPACE_OFFSET meaning
2018-11-03 04:06:37 -05:00
Scott Lahteine
6e3caf23b6
IS_DELTA => ENABLED(DELTA)
2018-11-03 03:57:11 -05:00
Ludy
5ba6607181
Fix keypad-related compile error ( #12306 )
2018-11-02 22:29:32 -05:00
Scott Lahteine
31c28d0dd2
Drop pgm_read_*_near and let headers choose ( #12301 )
...
- Drop `pgm_read_*_near` and let headers choose.
- Define `USE_EXECUTE_COMMANDS_IMMEDIATE` as a conditional.
- Add `process_subcommands_now` for SRAM-based commands.
2018-11-02 00:42:16 -05:00
Giuliano Zaro
323c088356
Restore LED light color after pid tuning ( #12082 )
2018-11-01 22:04:19 -05:00
Scott Lahteine
44f2a82a56
Move axis_homed, axis_known_position to motion.*
2018-10-31 17:44:42 -05:00
Scott Lahteine
946cf8b453
EEPROM read code grouping
2018-10-31 16:43:46 -05:00
Scott Lahteine
3583e2b449
Followup to Menu Refactor ( #12275 )
2018-10-30 16:34:45 -05:00
TheLongAndOnly
5536228359
G34 Auto-align multi-stepper Z axis ( #11302 )
2018-10-29 14:01:36 -05:00
Scott Lahteine
2bf18950ab
Refactor LCD menus
2018-10-28 15:46:45 -05:00
Scott Lahteine
ac5f2762b7
Use E_AXIS_N where possible
2018-10-28 15:46:45 -05:00
MasterPIC
6fbc87301f
'G29 H' to set a centered square probe area (linear, bilinear) ( #12242 )
2018-10-27 20:30:21 -05:00
Scott Lahteine
4b7a0a5b39
Require TMCStepper 0.2.2 or newer
...
In reference to #12175
2018-10-27 11:15:28 -05:00
Scott Lahteine
ab8425f1b5
Clean up PROBE_TRIGGERED_WHEN_STOWED_TEST ( #12232 )
2018-10-26 19:18:20 -05:00
Chris Rigter
3028a620af
Add RACK_AND_PINION_PROBE ( #12218 )
2018-10-26 18:24:24 -05:00
Scott Lahteine
d015f746cc
Fix some compile warnings ( #12220 )
2018-10-26 03:53:06 -05:00
Scott Lahteine
53c535a0c1
Remove trailing whitespace
2018-10-25 09:46:33 -05:00
Luc Van Daele
7243101135
z_offset fix for deltas ( #12210 )
2018-10-25 09:11:26 -05:00
InsanityAutomation
aebbb2359d
Fix IDEX homing X0 wrong direction ( #12200 )
2018-10-24 16:40:06 -05:00
Roman Moravčík
e48cbff10d
Fixed redefinition warnings of MSG_HOTEND_TOO_COLD. ( #12203 )
2018-10-24 15:00:07 -05:00
Scott Lahteine
46360f18b4
Bring thermistor_75.h up to speed
2018-10-23 14:52:16 -05:00
forkoz
3a3ab3391f
Return set_directions() to stepper.cpp ( #12182 )
...
Initial manual Z move can be negative if your stepper is inverted. Leads to bad situations for crashed or initially booted printers.
2018-10-22 19:30:51 -05:00
Roman Moravčík
d801f85963
Correct EEPROM read/write disparities. ( #12169 )
2018-10-21 02:56:31 -05:00
Scott Lahteine
b641571098
Replace types.h with millis_t.h
2018-10-20 23:07:12 -05:00
Giuliano Zaro
aa9202260d
Fix endstop when no interrupt ( #12158 )
2018-10-19 13:45:39 -05:00
Marcio Teixeira
71e19baf69
Fix kill => disable_all_heaters => print_job_timer.stop ( #12146 )
...
- Remove `print_job_timer.stop()` from `disable_all_heaters`
- Call `print_job_timer.stop()` for relevant `disable_all_heaters()`.
- Split up `kill()` for watchdog interrupt safety
2018-10-18 21:20:56 -05:00
InsanityAutomation
a768df83cb
Remove stale variable ( #12136 )
2018-10-18 11:26:14 -05:00
InsanityAutomation
3ec3872730
Single Z raise value for all tool-changing / parking ( #12090 )
...
* Universal tool-change Z lift
* Add TOOLCHANGE_ZRAISE to example configs
* Park/unpark changes to example configs
* Implement DEBUG_DXC_MODE
2018-10-17 11:11:41 -05:00
AnHardt
d82bcdeea1
Make PULSE_STOP(E) conditional ( #12121 )
2018-10-17 09:52:57 -05:00
Chris Pepper
c90e26dfa6
fix normal extruder stepping ( #12118 )
2018-10-17 02:47:31 -05:00
Scott Lahteine
8bf596bd4c
RETRACT_ZLIFT => RETRACT_ZRAISE
2018-10-16 16:46:40 -05:00
Marcio Teixeira
056561df93
[2.0.x] Enhancements to FILAMENT_RUNOUT_SENSOR ( #12069 )
...
- Added FILAMENT_RUNOUT_DISTANCE_MM option
- Added FILAMENT_MOTION_SENSOR option
2018-10-16 07:28:52 -05:00
Scott Lahteine
2ecb124e42
Fix trailing whitespace
2018-10-16 03:50:16 -05:00
AnHardt
f56968ba0b
New Continuous Filament Mixer ( #12098 )
2018-10-16 03:38:57 -05:00
Christopher Pepper
254b68fe2c
servo update
2018-10-14 18:43:48 +01:00
Karl Andersson
a40458405a
Fix datasize error when FWRETRACT is disabled ( #12086 )
2018-10-14 02:14:34 -05:00
Scott Lahteine
951b25163e
Extend M217 with configurable park/raise ( #12076 )
2018-10-13 23:08:20 -05:00
Scott Lahteine
a44ef27897
Outdent singlenozzle toolchange code
2018-10-12 15:19:03 -05:00
Scott Lahteine
d338e4d875
Fix singlenozzle toolchange cold extrusion test
2018-10-12 15:15:25 -05:00
Scott Lahteine
ddaef1a60c
Clean trailing whitespace
2018-10-11 21:40:55 -05:00
Scott Lahteine
45e738876a
Add stepper MS3 support
...
Co-Authored-By: TheLongAndOnly <thelongandonly@users.noreply.github.com>
2018-10-11 01:10:11 -05:00
Giuliano Zaro
d43d4e4219
Refactor PRINTER_EVENT_LEDS, apply to M303 ( #12038 )
...
Co-Authored-By: Giuliano Zaro <gmagician@users.noreply.github.com>
2018-10-10 21:25:43 -05:00
Scott Lahteine
e8d2cf4fb5
EEPROM followup (tmc_stepper_current_t)
2018-10-10 17:25:45 -05:00
InsanityAutomation
3cb5517ddb
Make singlenozzle tool-change honor no_move ( #12056 )
...
...Set no move earlier so it applies
2018-10-10 16:49:59 -05:00
InsanityAutomation
d332fcb8fa
Fix firmware-retract compile errors ( #12061 )
2018-10-10 16:46:08 -05:00
InsanityAutomation
b2c1cd7eda
Allow cold change of active extruder ( #12055 )
...
Followup to #11994
2018-10-10 09:57:48 -05:00
Scott Lahteine
d556dc1865
Fix and improve EEPROM storage ( #12054 )
...
* Clean up Temperature PID
* Improve EEPROM read/write/validate
* Group `SINGLENOZZLE` saved settings
* Group planner saved settings
* Group filament change saved settings
* Group skew saved settings
* Group `FWRETRACT` saved settings
2018-10-10 09:45:20 -05:00
