bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
12,594 Commits 1 Branch 4 Tags 151 MiB
45bde333d5
Commit Graph

12594 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Karl Andersson
64a4649290 STM32 - Fix SD write (#12897) 2019-01-15 18:44:22 -06:00
Ludy
294521439e Clean up Configuration_adv.h (#12900) 2019-01-15 18:42:10 -06:00
InsanityAutomation
59b18aaeef Allow resume from pause with parking enabled (#12893) 
Currently, Pause of an SD-Memory card print does not work.    This has been verified to resolve the issue by multiple people.   

I understand more work needs to be done to resolve some of the concerns...
 2019-01-15 07:58:54 -07:00
Giuliano Zaro
85f149befe Save some progmem (#12913) 2019-01-14 20:56:30 -06:00
mikeshub
7fde8d9d1e Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support (#12855) 
- Fix a bug in MAXxxxx thermocouple temp reporting.
- Add support for 3-wire HD44780.
- Add support for PCA9533 RGB driver.
- Add configuration examples for FlashForge CreatorPro.
 2019-01-14 14:29:55 -06:00
Scott Lahteine
3644c940bf Tweak SD section of Main Menu 2019-01-13 18:00:07 -06:00
teemuatlut
1a79878dff Remove TMC_Z_CALIBRATION in favor of Z_STEPPER_AUTO_ALIGN 2019-01-12 18:07:28 -06:00
Scott Lahteine
7cfce20cd3 Update comments on M125 2019-01-12 17:52:44 -06:00
Jason
dc4786a504 Config files for PowerWASP Printer (#12889) 2019-01-12 16:57:45 -06:00
Scott Lahteine
3e867008f0 Fix some HAL_STM32F1 type declarations 2019-01-12 16:21:11 -06:00
Scott Lahteine
eb78aed863
Rename LCD menus according to variable types (#12892) 2019-01-12 16:01:04 -06:00
InsanityAutomation
ed3ab5e212 Fix M24 not starting new job (#12887) 2019-01-12 15:30:44 -06:00
Nils Hasenbanck
f9299c4461 Make timer definition in pin files for STM32 possible (#12874) 
RemRam needs to redefine a particular timer to work correctly. The HAL did foresee this possibility and checks if the timer was already defined for either the stepper or temperature timer.

Prior to this commit the header file for the timers couldn't see those definitions in the pin file, but this commit will fix this.

Tested on an actual hardware to verify. (It wouldn't boot without it.)
 2019-01-12 14:40:49 -06:00
InsanityAutomation
082f6a27de ADAPTIVE_FAN_SLOWING extension to hotend thermal protection (#12853) 2019-01-12 00:41:48 -06:00
Scott Lahteine
459f4fef60 Fix Temperature::init bug with HEATER_4_PIN 2019-01-11 22:54:26 -06:00
InsanityAutomation
a403d9a50c Improve menu pause / resume (#12876) 2019-01-11 20:42:11 -06:00
Alain Martel
432c21456f Add 3DFabXYZ Migbot example config (#12775) 
Co-Authored-By: Alain Martel <alain74martel@gmail.com>
 2019-01-11 20:41:20 -06:00
Scott Lahteine
fb8111553e getStatus => report_status 2019-01-11 19:51:00 -06:00
Chris Pepper
2919f3045d [LPC176x] Update PIO extrascript (#12878) 2019-01-11 19:45:33 -06:00
Scott Lahteine
19fea772e5 Use E_AXIS_N where it makes sense 2019-01-11 19:42:34 -06:00
Scott Lahteine
0d30ccf767 Tweaks to TMC26XStepper 2019-01-11 19:42:34 -06:00
HackingGulliver
1fd8e2c649 Fix: Junction Deviation calculates wrong cos(theta) on CoreXY (#12879) 2019-01-11 19:25:48 -06:00
Scott Lahteine
b402040059 Split bed size sanity check into two 2019-01-11 15:49:57 -06:00
Chris Barr
1d33784bf9 Add RUMBA32 Board (#12856) 2019-01-10 19:34:31 -06:00
Ondřej Nový
a0ef6198ff Level bed corners Z-hop height option (#12858) 2019-01-10 19:15:17 -06:00
Karl Andersson
8ae6f1e556 Fix errors and some compiler warnings with HAL_STM32 PlatformIO build (#12869) 2019-01-10 19:01:31 -06:00
Scott Lahteine
e6484d9dab Return to status when SD card is removed 2019-01-10 15:43:31 -06:00
Scott Lahteine
5f2d75f45b Move PINS_DEBUGGING to @section develop 2019-01-08 20:05:05 -06:00
Scott Lahteine
da42f27c9e Use maths macros for ceil/floor 2019-01-05 21:21:02 -06:00
Ludy
de4561c980 VORON Add LCD option BEEP_ON_FEEDRATE_CHANGE (#12822) 2019-01-05 14:12:05 -06:00
Adrian Cuzman
917cf3c7f0 Fix (broken) link to Install ReArm tutorial (#12823) 2019-01-05 14:04:34 -06:00
Giuliano Zaro
709a6356f7 Remove obsolete test conditions (#12829) 2019-01-05 14:02:45 -06:00
Luu Lac
bcf347403b Fix M106 extruder & fan count (#12820) 2019-01-05 14:01:35 -06:00
Kaushik Vemparala
ba7e35cbab Add LCD option BEEP_ON_FEEDRATE_CHANGE (#12774) 2019-01-04 19:30:08 -06:00
jmz52
d372e7e477 SDIO support for STM32F1 (#12782) 2019-01-04 13:38:07 -06:00
Marcio Teixeira
6a8fb0f25f Simplify backlash compensation code. (#12813) 
- Use `TEST(dm,axis)` to determine directions instead of doing comparisons.
- Remove recomputation of `millimeters` and `delta_mm` since backlash compensation should not affect the distance over which material is extruded.
 2019-01-04 13:30:56 -06:00
Scott Lahteine
a59d3d4323 Restore Flattr links to README 2019-01-03 17:07:29 -06:00
luxflow
7f244f9b9c Update LPC SD pins for BIQU SKR (#12767) 
(Exactly matching the Azteeg X5 MINI Wifi)
 2019-01-03 10:44:00 -06:00
jmz52
813a4ea107 Add support for Mks Robin TFT display (#12706) 
* Add support for MKS Robin TFT display

- Add support for MKS Robin TFT display and encoder for MKS Robin board.
- Generic 128x64 UI with x2 upscale is used (for now).
- Tested on MKS Robin TFT V2.0 with ST7789V controller.
 2019-01-03 10:38:39 -06:00
jmz52
c4237b529f Fix MKS Mini and SD card conflct over SPI mode (#12783) 2019-01-03 10:27:53 -06:00
Phr3d13
01f75591c6 Fix GTM32_PRO_VB Serial and HAL via watchdog (#12753) 
Move `watchdog_reset` from `.h` to `.cpp` to eliminate the need to include `MarlinConfig.h` in a HAL-related file.
 2019-01-03 09:46:49 -06:00
Scott Lahteine
288340cb6c Followup to VORON 2019-01-03 09:14:14 -06:00
Scott Lahteine
2aaa681dea Remove unused Cheaptronic pins 2019-01-03 08:58:55 -06:00
Marcio Teixeira
81e753064a Fix ExtUI compile warnings and error (#12799) 2019-01-03 08:36:43 -06:00
Ludy
74c47803f7 Add VORON printer (#12705) 2019-01-03 06:27:03 -06:00
kAdonis
637fb20c75 Allow 4 fan animation frames (#12772) 2019-01-03 06:03:06 -06:00
petieken
d9cf5e4883 Update pins_BIQU_SKR_V1.1.h (#12758) 2019-01-02 13:50:05 -06:00
TheLongAndOnly
cb643d87df Adding missing code for triple Z-stepper auto-align (#12786) 2019-01-01 18:22:04 -06:00
Ludy
14a7faf087 Fix compile warning comparison uint and int (#12788) 2019-01-01 18:20:12 -06:00
Marcio Teixeira
60cb36bef3 Misc. improvements (#12747) 
* Make ExtUI respect MAXTEMP limits
  - Temperatures are now clamped by MAXTEMP limits rather than arbitrary values.
* Speed up USB init, add status
  - Speed up USB initialization
  - Show status message if init failed
* Enable status messages for EXTENSIBLE_UI
* Adjust max limit to MAX_TEMP - 15
* Misc. tweaks to formatting, const, etc.
 2019-01-01 15:17:48 -06:00