Commit Graph

8508 Commits

Author SHA1 Message Date
Scott Lahteine
82dafbba33 Add Z_PROBE_LOW_POINT to example configs 2018-04-09 01:55:05 -05:00
Roxy-3D
a731a723e8 Better i3-2020 Z_PROBE_OFFSET_FROM_EXTRUDER 2018-04-08 21:26:36 -05:00
Roxy-3D
26cc12eaa4 Resolve corruption of Max7219 Debug LED Matrix 2018-04-08 21:26:36 -05:00
Scott Lahteine
dca69efc11 Update Bed PID comments 2018-04-08 06:44:47 -05:00
Scott Lahteine
56486c5c0e Apply const to manage_inactivity 2018-04-08 04:00:26 -05:00
Scott Lahteine
a6485456df Fix LIGHTWEIGHT_UI with UBL
See https://github.com/MarlinFirmware/Marlin/issues/10317#issuecomment-379100702
2018-04-08 03:24:22 -05:00
Scott Lahteine
e02fc4f1d6 Better RESTORE_LEVELING_AFTER_G28 sanity-check
As suggested by @GMagician
2018-04-08 03:24:15 -05:00
Scott Lahteine
44a697ab04 Set STM32F1 TEMP_TIMER_FREQUENCY to 1K
Responding to https://github.com/MarlinFirmware/Marlin/pull/8833#issuecomment-379426803
2018-04-08 01:08:05 -05:00
Scott Lahteine
cec6e19099 Add RepRapPro Huxley configuration
Based on #10343 by @indazoo
2018-04-08 00:37:18 -05:00
Scott Lahteine
9ff4e9e1e6 Patch _IS_HW_SPI so defined() works 2018-04-07 23:29:00 -05:00
Scott Lahteine
cea398849e Tweak to gcode_line_error/return 2018-04-07 21:25:49 -05:00
etagle
a29adde5c0 Implement BEZIER_JERK_CONTROL
Enable 6th-order jerk-controlled motion planning in real-time.
Only for 32bit MCUs. (AVR simply does not have enough processing power for this!)
2018-04-07 21:03:28 -05:00
Scott Lahteine
5932df7ea1 Add BEZIER_JERK_CONTROL to example configs 2018-04-07 21:03:22 -05:00
Lenbok
0e8242180d Chamber temperature monitoring and auto fan control.
This is an initial cut for feedback, updated for 2.0.x.

Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?

Chamber temperatures are not reported on the LCD in any way.

When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.

As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
2018-04-06 23:09:06 -05:00
Scott Lahteine
5b3bda1c16 Add Chamber Temp options to example configs 2018-04-06 23:09:06 -05:00
Bob-the-Kuhn
acda4ecb20 Fix DUE Trinamic SW/HW SPI sanity check (#10336) 2018-04-06 22:22:30 -05:00
Bob-the-Kuhn
ab715c70d1 TMC SPI sanity-check and pins debugging (#10324) 2018-04-06 20:24:54 -05:00
Scott Lahteine
4dc7e64789 Update Slovak language
Based on #10313 by @rmoravcik
2018-04-06 20:23:20 -05:00
Scott Lahteine
0dccf9ea6a
Merge pull request #10318 from marcio-ao/pr-einsy-retro-tmc2130
[2.0.x] Fix TMC2130 DIAG1 active high, Einsy Retro
2018-04-06 20:18:34 -05:00
Marcio Teixeira
2efc072fdb Clear progress bar on completion (#10333)
Fix #10330
2018-04-06 20:13:19 -05:00
GMagician
6ce060cfe0 [2.0.x] Update language_it.h (#10322)
Updated to #10296
2018-04-06 20:07:46 -05:00
Marcio Teixeira
9356cf648f Added support for Einsy Retro
http://reprap.org/wiki/EinsyRetro
2018-04-06 19:48:46 -05:00
Marcio Teixeira
75037493fa Default active low for TMC2130 DIAG1 (#10294)
- Added sanity check to inform users to set the endstop to inverting
  when using SENSORLESS_HOMING
2018-04-06 19:48:46 -05:00
Scott Lahteine
e8e60263c8 Scale feedrate (mm/s to deg/s) for SCARA 2018-04-06 19:47:48 -05:00
Scott Lahteine
051303ad42 Russian language updates
From #10311 by @anton-piliugin
2018-04-05 00:46:46 -05:00
Sean
2fa0a73c2c Implement filament change continuous purge 2018-04-04 20:57:51 -05:00
Scott Lahteine
d133ad61f3 Add continuous purge to example configs 2018-04-04 20:56:18 -05:00
Scott Lahteine
4b25543633 Backtrace formatting cleanup 2018-04-04 20:24:39 -05:00
Bob-the-Kuhn
902c885782 Switch to TMC2130 compatible hardware SPI & misc (#10299) 2018-04-04 20:13:27 -05:00
Scott Lahteine
1c36606886 Fix MSG_HEATING_FAILED_LCD_BED macro evaluation 2018-04-04 19:01:22 -05:00
Scott Lahteine
fe91514395
MBL should add z_offset regardless of fade (#10308) 2018-04-04 18:57:33 -05:00
Marcio Teixeira
8bc93c6f2b Improve heating/cooling LCD messages (#10293) 2018-04-04 18:29:27 -05:00
GMagician
21a47b50f4 Additional tool-change fixes (#10304)
Followup to #10257
2018-04-04 17:06:33 -05:00
Scott Lahteine
f68b4265a6 Fix a probe pin definition 2018-04-02 21:52:34 -05:00
Yunhui Fu
a019eebdd6 support utf8 unicode for test language (#10220) 2018-04-02 20:03:25 -05:00
Scott Lahteine
656219d867 Add configs for Creality CR-8 2018-04-02 20:02:04 -05:00
Karl Andersson
7cbbc2af7a [2.0.x] Optional heater signal inversion (#10260) 2018-04-02 19:37:41 -05:00
Marcio Teixeira
4d1a61335c [2.0.x] Fixed Makefile for Marlin 2.0 (#10255) (#10281)
* Fixed Makefile for Marlin 2.0 (#10255)

- Makefile now supports the new Marlin 2.0 directory hierarchy.
- RELOC_WORKAROUND is now automatically enabled based on avr-gcc version.

* Makefile support for U8glib and TMC2130Stepper

- Updated paths for oliver's U8glib 1.19.1
- Added option for teemuatlut's TMC2130Stepper 2.2.1
2018-04-02 19:36:27 -05:00
Scott Lahteine
241996d5d6
Merge pull request #10257 from thinkyhead/bf2_tool_change_debug 2018-04-02 19:33:45 -05:00
Scott Lahteine
4c79dc1093 Fix a Serial+EEPROM compile error
Fixes #10278
2018-04-02 03:11:20 -05:00
Scott Lahteine
93305a2d5e Fix some spellings 2018-04-02 03:03:37 -05:00
Scott Lahteine
adcb87f0db Z Endstop Servo => Z Probe Servo 2018-04-01 23:54:21 -05:00
Scott Lahteine
4f0eafce8f Add more AVR boards to Makefile 2018-04-01 18:22:06 -05:00
Scott Lahteine
4a23069de9 Fix Ender 4 / CR-8 compilation
- Assign 243 (like EFB) as Ender-4/CR-8 board ID
- Add to `Makefile`
- Add to `pins.h`
2018-04-01 18:22:06 -05:00
Scott Lahteine
02f0f95d40
Handle disabled HYBRID_THRESHOLD in EEPROM (#10275) 2018-04-01 16:58:37 -05:00
Scott Lahteine
9ec2c03c5b Fix likely error in retract/recover
Addressing #10200
2018-03-31 23:01:13 -05:00
Scott Lahteine
49f384a2ab Note about MKS_MINI_12864 in sanitycheck 2018-03-31 22:52:23 -05:00
Scott Lahteine
2672120a97 Do a small raise for all move-back 2018-03-31 22:43:05 -05:00
Scott Lahteine
5acccbacc1 Simplified leveling-based tool change 2018-03-31 22:43:05 -05:00
Scott Lahteine
1a75165f35 For set_z_fade_height use set_bed_leveling_enabled 2018-03-31 22:43:05 -05:00
Scott Lahteine
d1734a089a Split up tool_change for some setups 2018-03-31 22:43:05 -05:00
Scott Lahteine
a9f94f260a Some RADDS pin updates 2018-03-31 22:15:24 -05:00
Scott Lahteine
31df43212c Use lcd_printPGM_utf in more places
Fix #10256
2018-03-31 20:49:20 -05:00
Scott Lahteine
7d8a46519f Output ABC for delta stepper counts 2018-03-31 20:13:32 -05:00
Scott Lahteine
6098efcc59 Use float62 for LCD edit of Z Fade 2018-03-31 20:03:09 -05:00
Scott Lahteine
f6d13e2295 Allow Z_SAFE_HOMING sanity checks to handle floats 2018-03-31 19:01:56 -05:00
Scott Lahteine
889fd5f71f Backtrace minor cleanup 2018-03-31 18:59:36 -05:00
Scott Lahteine
53f0c7522a Symmetrical FWRETRACT Z Hop
Do the Z lift normally before setting Z back to its prior value. But do the Z lower using spoofing. This should produce proper symmetrical movement.
2018-03-30 15:54:01 -05:00
Scott Lahteine
ac7e97f4fe Change order of inactive stepper disable/enable
This ensures that steppers that share an enable pin will only be disabled for a miniscule time.
2018-03-30 15:07:38 -05:00
Scott Lahteine
55e9b85ad6 Clear the "Wait for user" message set by M0/M1
See https://github.com/MarlinFirmware/Marlin/issues/10246#issuecomment-377146936
2018-03-29 18:38:12 -05:00
Scott Lahteine
b6a55f0891 Temporary workaround for tool-change compile error
Pending a more complete solution to tool-change Z deviation.
2018-03-29 17:55:57 -05:00
Scott Lahteine
b852781eba Fix BLTOUCH compile error
Followup to #10250
2018-03-29 17:55:57 -05:00
AnHardt
c1f58a238d No delay in sensorless quick homing (#10254) 2018-03-29 16:10:20 -05:00
Scott Lahteine
1be955e52a Alert users about low Z jerk values 2018-03-28 23:08:33 -05:00
Scott Lahteine
9e4c037cef
Wait before turning off PRINTER_EVENT_LEDS at print end (#10248) 2018-03-28 22:59:28 -05:00
Scott Lahteine
8b7381b626 Clear sensorless homing in home_delta after first move-to-top 2018-03-28 22:01:42 -05:00
Scott Lahteine
dbe2b6f7b0 Do moves towards endstops differently in do_homing_move 2018-03-28 22:01:42 -05:00
Scott Lahteine
d573a2cada Fix pins_RAMPS.h for 32-bit platforms
Followup to 436e5b7
2018-03-28 22:01:20 -05:00
Scott Lahteine
f04be05a14 "G28 Z Forbidden" => "Home XY first"
Some languages will need to be updated for proper phrasing
2018-03-28 21:51:15 -05:00
Scott Lahteine
a97624dd81 Allow pinsDebug "Analog in" long int 2018-03-28 20:40:28 -05:00
Scott Lahteine
7b8bb2519e Fix gcode_line_error call
Followup to 3007eee
2018-03-28 20:29:41 -05:00
Scott Lahteine
aa20b3ef7c Fix linear/3-point manual leveling buffer overrun
Fixes #10137
2018-03-28 18:41:22 -05:00
Alexey Shvetsov
cbdc78ec0f Fix STM32 compilation with PlatformIO (#10245) 2018-03-28 18:35:20 -04:00
Scott Lahteine
9d2ea5d64b Undo German changes
See 941e9bd329 (commitcomment-28262166)
2018-03-28 17:05:14 -05:00
Scott Lahteine
2bc7f416ee Fix missing comma in tmc_sgt
Fixes #10209
2018-03-28 17:05:14 -05:00
Scott Lahteine
38378cd0e8 M218 with DELTA needs planner.h
Fix #10232
2018-03-28 17:05:14 -05:00
Scott Lahteine
3007eee22e Require a checksum when writing to SD
From #10204 by @adriancuzman
2018-03-28 17:05:13 -05:00
Bob-the-Kuhn
9656a82609 Fix G53/CNC_COORDINATE_SYSTEMS compilation, Travis testing (#10227) 2018-03-28 14:14:39 -04:00
Eduardo José Tagle
749f19e502 [2.0.x] Move backtrace to a shared location (#10237)
- And implement the `backtrace()` function call
2018-03-28 14:13:20 -04:00
xC0000005
7dc256432f Restore STM32F1 series to working order. (#10229)
The `_O2` attribute is no longer needed on the malyanlcd function, and the macros have broken timer numbers - reset this to a function to return the right device. Also fix the bit order cast in SPI.
2018-03-28 14:07:52 -04:00
Rob Power
d1f14202a9 [2.0.x] NANODLP_Z_SYNC requires linear axes (#10240) 2018-03-28 14:03:34 -04:00
Scott Lahteine
b287560258 Fix say_M603 2018-03-28 12:54:58 -05:00
Scott Lahteine
436e5b7ea3 Apply spacing in pins files 2018-03-28 12:52:08 -05:00
Scott Lahteine
4d533b9baa Update bq Hephestos 2 probe offset
From #10234 by @thopiekar
2018-03-27 21:05:03 -05:00
Bob-the-Kuhn
78df07ac71
Merge pull request #10221 from ejtagle/bugfix-2.0.x
[2.0.x] DUE: Several fixes to the backtracker
2018-03-27 03:26:10 -05:00
etagle
8934a2c49b Added some missing Thumb instructions to the traceback follower, so now it is able to traceback through switch() statements 2018-03-27 04:30:38 -03:00
etagle
328edea03a Several fixes to the backtracer. Tested ant it works 2018-03-26 03:42:54 -03:00
Scott Lahteine
aa6dacbbdf German update
Based on #10216
2018-03-25 15:21:13 -04:00
Yunhui Fu
8322a79bb9 update the UTF-8 C strings for Chinsee languages, for Simplified and Traditional Chinese (#10211) 2018-03-25 12:37:54 -04:00
ejtagle
9a24c0ae3f Tons of fixes to the backtracker code, and also added an extra backtracker that does not require unwind tables to work and it is used if unwind tables are absent 2018-03-25 00:52:04 -03:00
Scott Lahteine
a891af2f7a Enforce minimum TMC2130 / TMC2208 libs 2018-03-24 15:57:22 -04:00
Bob-the-Kuhn
75b381cd28
Merge pull request #10203 from Bob-the-Kuhn/sanity-check-fix
[2.0.x] Fix TMC sanity checks that always fail
2018-03-24 14:06:34 -05:00
Bob-the-Kuhn
433e984d1f move comment to fix compile error 2018-03-24 13:44:54 -05:00
Bob-the-Kuhn
f7857ac8a8
Merge pull request #10185 from ejtagle/bugfix-2.0.x
[2.0.x] DUE debugging: Solve WDT startup delay, add traceback & crash report uses programming port baud rate
2018-03-24 13:32:34 -05:00
Bob-the-Kuhn
b756a15aba another needs to be deleted 2018-03-24 10:22:03 -05:00
Bob-the-Kuhn
50c81ebe0d remove check that always fails 2018-03-24 09:36:50 -05:00
Scott Lahteine
3ac135cef3 Enforce minimum TMC2130 / TMC2208 libs 2018-03-23 18:05:23 -04:00
Bob-the-Kuhn
8870f9b1da Fix M503 helper functions following TMC updates (#10197) 2018-03-23 16:43:43 -05:00
Scott Lahteine
bb7236a750
Z correction on tool-change for all HAS_MESH (#10199) 2018-03-23 13:12:00 -05:00
Bob-the-Kuhn
509227fd80 change to mode 0 2018-03-23 09:37:58 -05:00