Charles Bell
3b8216bdd1
Corrected #endif and ifdef for Z_PROBE_SLED code.
2014-09-04 16:40:22 -04:00
Charles Bell
37799f70ba
Corrected retract() call for use of auto probe without sled enabled.
2014-09-04 14:36:39 -04:00
Neil Darlow
1632e5e38a
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2014-09-04 12:21:35 +01:00
Filip Mulier
fe3a09bbcf
Correct analog sampling time for additional A to D sample
...
Adjusted the #define PID_dT to reflect 10 A to D sample steps, vs
original 8.
2014-09-01 06:26:19 -05:00
Gina Häußge
1e9dc85148
Do not use translations for the serial console messages
...
The serial protocol has to stay machine readable, without having
to cope with a ton of different human language variants. So
just leave it at the original english version.
Should fix ErikZalm/Marlin#1052
2014-08-29 18:02:59 +02:00
fsantini
cf325ba240
Fix issue 935: error in matrix calculation
2014-08-28 21:10:50 +02:00
Erik van der Zalm
018b68a5c4
Merge pull request #976 from cocktailyogi/SCARA_by_Yogi
...
Implemented SCARA-Maths
2014-08-28 16:32:52 +02:00
Erik van der Zalm
dde61d8886
Merge pull request #977 from OskarLinde/Marlin_v1
...
Fix lcd itostr3() to handle negative numbers
2014-08-28 16:31:53 +02:00
Erik van der Zalm
0fbfb1bf82
Merge pull request #991 from bonm014/patch-1
...
Leapfrog controller board support
2014-08-28 16:27:52 +02:00
Erik van der Zalm
8340ca6e05
Merge pull request #992 from Grogyan/patch-1
...
temperature.cpp fixes for SD card and MAX6675
2014-08-28 16:27:14 +02:00
Erik van der Zalm
9887555192
Merge pull request #998 from darconeous/pull-requests/fwretract
...
FWRETRACT fixes
2014-08-28 16:24:51 +02:00
Erik van der Zalm
105571ec68
Merge pull request #1005 from midopple/Marlin_v1
...
With option DISABLE_INACTIVE_EXTRUDER the extruder is disable to early
2014-08-28 16:24:14 +02:00
Erik van der Zalm
68dd5e635e
Merge pull request #1024 from oliasmage/Marlin_v1
...
Adding Z Probe via sled mounted endstop
2014-08-28 16:15:54 +02:00
Erik van der Zalm
25069ed4e9
Merge pull request #1031 from Roxy-3DPrintBoard/Z_PROBE_REPEATABILITY-with-correct-Defaults
...
Z probe repeatability with correct defaults
2014-08-28 16:14:10 +02:00
Filip Mulier
75b3a68b65
Revert "Change pinMode to SET_INPUT or SET_OUTPUT"
...
This reverts commit 1d0fe035f3
.
2014-08-16 13:26:48 -05:00
Filip Mulier
e3c88a5120
Filament sensor changes to config file
...
Update the config file for improvements and clarifying what diameter to
use in the slicer software.
2014-08-16 07:08:09 -05:00
Filip Mulier
62db9848d3
Improvements and bug fixes in sensor delay buffer for filament sensor code
...
Improvement to avoid reinitializing delay buffer with every print. Fixed
issues in buffer indexing and memory out of bounds due to floating point
imprecision. Simplified the code by avoiding conversion to standard
diameter and 1cu mm extrusion, which caused complications in determining
mm extruded.
2014-08-16 06:50:13 -05:00
Florian Baumann
5908fd5cec
Fix reseting CHDK pin to LOW
...
chdkActive was set to false regardless of (millis() - chdkHigh) being bigger than the CHDK_DELAY or not. So if (millis() - chdkHigh) wasn't bigger than the delay the first time, the CHDK would never be set back to LOW.
Also, don't return from the function, as there might be other stuff to do, after the CHDK check.
2014-08-11 14:12:32 +02:00
Roxy-3DPrintBoard
0adbc79571
Fix Default Configuration so Auto Bed Leveling is off
...
This snapshot has the Auto Bed Leveling turned off because most Marlin
users do not have that feature.
2014-08-10 10:18:54 -05:00
Roxy-3DPrintBoard
0091865583
Z_PROBE_REPEATABILITY test
...
Z_PROBE_REPEATABILITY test for Auto Bed Leveling.
Implemented as M48 with extra user specified options.
Full support at
http://3dprintboard.com/showthread.php?2802-Auto_Bed_Leveling-Z-Probe-Repeatability-code
2014-08-09 15:37:23 -05:00
Filip Mulier
85649a4549
Real-time filament diameter measurement and control
...
This feature allows the printer to read the filament diameter
automatically and adjust the printer in real time. Added code to read
an analog voltage that represents a filament diameter measurement. This
measurement is delayed in a ring buffer to compensate for sensors that
are a distance away from the extruder. The measurement is used to
adjust the volumetric_multiplier for the extruder. Some additional g
codes (M404, M405, M406, M407) are used to set parameters and turn
on/off the control. g code M221 is updated. Pins for RAMPS1.4, RAMBO,
and Printrboard are identified for analog input. The configuration file
is updated with relevant user parameters.
2014-08-06 19:30:57 -05:00
Filip Mulier
1d0fe035f3
Change pinMode to SET_INPUT or SET_OUTPUT
...
Original code is using WRITE from fastio, but original used pinMode to
set pin direction and did not use the fastio SET_INPUT or SET_OUTPUT.
This caused an issue with the rotary encoder interface to boards based
on teensyduino, since for teensyduino pin numbers for fastio and the
usual Arduino IO are different.
2014-08-04 21:44:04 -05:00
Charles Bell
e7707aedbc
Commented out new #defines in Configuration.h.
2014-08-04 10:18:25 -04:00
Charles Bell
0a8dc0e96b
Added documentation to the README.md for the sled Z probe option. CAB
2014-08-04 10:07:43 -04:00
Charles Bell
d2fcb3ee56
CAB: Added code for Z-probe with Z endstop mounted on a sled.
2014-08-01 11:29:59 -04:00
Neil Darlow
3cd7dbcc45
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2014-07-30 13:01:52 +01:00
daid
c13a831ea1
Merge pull request #1017 from foosel/fix/checksum_truncation_bug
...
Fix for a wrong checksum truncation for certain commands
2014-07-24 19:41:34 +02:00
Gina Häußge
2d22902d08
Fix for a wrong checksum truncation for certain commands
...
Positioning of string terminator to truncate checksum from the commands
M23, M28, M30, M32, M928 and M117 was off by one, causing the last
letter of the actual command to be truncated instead of just the
checksum.
In case of the SD commands this caused checksummed commands targeting
existing files to fail since the last letter of the filename was
truncated.
In case of M117 this caused the last given letter not to be displayed.
This patch fixes the off-by-one error and sets the null terminator
on the exact position of the * starting the checksum instead of the
character before that.
2014-07-24 12:04:02 +02:00
cocktailyogi
ad3b770c1a
updated examples
2014-07-20 13:55:13 +02:00
cocktailyogi
2f4a20257c
imported last Marlin changes
2014-07-20 13:49:26 +02:00
daid
aacff0d361
Merge pull request #948 from Dim3nsioneer/Marlin_v1
...
Implementation of FW extruder change retract
2014-07-18 16:10:15 +02:00
midopple
17aa67e4ea
If the option DISABLE_INACTIVE_EXTRUDER ist active the extruder switch to early to inactive because there are some moves in the buffer. So the planner wait 32 moves to disable the unused extruder.
2014-07-13 21:52:32 +02:00
Robert Quattlebaum
1fd9a7d476
Fix for FWRETRACT on DELTA printers.
...
Fixes #817
2014-07-09 09:24:26 -07:00
Neil Darlow
3f2c771d90
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2014-07-07 18:17:15 +01:00
Grogyan
bcd039aa81
Update pins.h
2014-07-05 17:55:03 +12:00
Grogyan
82606354dd
Update temperature.cpp
...
Enables both SD card and MAX6675 to talk with each other
Fixes also issue #750
2014-07-05 17:17:17 +12:00
bonm014
32a6451ad8
Add leapfrog and dual Y/Z
...
I have added the pin set for the leapfrog and the support of dual Y and Z
2014-07-03 21:15:03 +02:00
bonm014
b5417be109
Update Configuration.h
...
Leapfrog added to the board list
2014-07-03 21:03:22 +02:00
bonm014
f244045245
Update pins.h
...
Leapfrog board added to the pin list
2014-07-03 21:01:41 +02:00
Pablo Clemente
2242a84218
Changed the declaration of the variable to Marlin_main.cpp to fix issue on commit #965
2014-07-01 16:45:03 +02:00
Neil Darlow
6e3406d228
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2014-07-01 10:27:39 +01:00
alexborro
43c298a7a9
Add "Thermal Runaway Protection" feature
...
This is a feature to protect your printer from burn up in flames if it
has a thermistor coming off place (this happened to a friend of mine
recently and motivated me writing this feature).
The issue: If a thermistor come off, it will read a lower temperature
than actual. The system will turn the heater on forever, burning up the
filament and anything
else around.
After the temperature reaches the target for the first time, this
feature will start measuring for how long the current temperature stays
below the target minus _HYSTERESIS (set_temperature -
THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).
If it stays longer than _PERIOD, it means the thermistor temperature
cannot catch up with the target, so something *may be* wrong. Then, to
be on the safe side, the system will he halt.
Bear in mind the count down will just start AFTER the first time the
thermistor temperature is over the target, so you will have no problem
if your extruder heater takes 2 minutes to hit the target on heating.
2014-06-30 15:22:49 -03:00
Pablo Clemente
d86c3cf43c
Changed the type of variable to bool, the name to "cancel_heatup", flags implementation and added this fix to M190 gcode too.
2014-06-30 15:12:13 +02:00
cocktailyogi
f0cab611db
optimised some math-code
2014-06-24 18:43:36 +02:00
Oskar Linde
269a068032
Fix lcd itostr3() to handle negative numbers
2014-06-24 14:31:15 +02:00
cocktailyogi
fae7d08698
fixed wrong compiler-option
2014-06-23 18:16:42 +02:00
cocktailyogi
512f2a3136
restore Branch from Backup
...
sorry for that
2014-06-23 17:09:57 +02:00
Pablo Clemente
cd3220d055
Inverted state logic for forced_heating_stop variable
2014-06-13 08:39:58 +02:00
Pablo Clemente
86b4b805d2
Fixed stop print LCD function on M104
2014-06-12 18:43:16 +02:00
Greg Tan
6e6e4e2143
Added thermistor table for the 500C thermistor shipped with the Pico hot end.
2014-06-08 09:35:04 +08:00
Neil Darlow
9d11b70436
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2014-06-07 20:48:25 +01:00
Gina Häußge
0de826160e
M30 response is missing linefeed, "ok" therefore not on own line
...
This leads to the command not being acknowledged properly
by the firmware, leading to consecutive issues in host software
waiting for an acknowledgement.
2014-06-02 17:11:32 +02:00
Dim3nsioneer
3c927901a4
Implementation of FW extruder change retract
...
FW retraction is extended onto swap retraction invoked by 'G10 S1'.
Bookkeeping of the retract state of all extruders allows for having one
extruder fw standard retracted while another extruder is swap retracted.
An LCD menu item for the swap retract and recover length was added.
2014-06-02 17:02:10 +02:00
Dim3nsioneer
8a32c5395b
renaming the disable inactive extruder feature
2014-06-02 14:07:02 +02:00
Dim3nsioneer
29e7639933
Add switch unused feeder(s) off
...
Having the non-active feeder motors powered on all the time is not
necessary. A feature to deactivate the unused feeder motors has been
implemented. The feature is enabled on default but can be switched off
in the configuration.
2014-06-02 08:13:09 +02:00
Justin Nesselrotte
07c0eeee99
Fixed a comment in the planner
2014-06-01 19:04:41 -05:00
David Forrest
09b84faa00
Configuration.h, pins.h: Add MOTHERBOARD 84 for Teensy++2.0
2014-05-29 17:19:16 -04:00
neildarlow
efb6d61413
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2014-05-24 13:08:58 +01:00
nothinman
38192cb5f3
Add M112 description to Marlin_main
2014-05-20 15:20:19 +01:00
nothinman
aed5ec008a
Merge pull request #851 from DanNixon/estop
...
Implemented M112
2014-05-19 17:55:34 +01:00
Erik van der Zalm
cfb98ef682
More coverity fixes
2014-05-15 22:09:50 +02:00
zaubara
92e14298b0
Fixes typo for lcd backlighting on I2C PCF8575
...
When using LCD_I2C_TYPE_PCF8575T (like Sainsmart I2C), the backlight
won't come on; the incorrect ifdef blocks the evocation of the backlight
functions.
2014-05-15 01:37:23 +02:00
Erik van der Zalm
9db9842aea
Fixed error found by the free coverity tool ( https://scan.coverity.com/ )
...
===================================================
Hi,
Please find the latest report on new defect(s) introduced to ErikZalm/Marlin found with Coverity Scan.
Defect(s) Reported-by: Coverity Scan
Showing 15 of 15 defect(s)
** CID 59629: Unchecked return value (CHECKED_RETURN)
/Marlin_main.cpp: 2154 in process_commands()()
** CID 59630: Operands don't affect result (CONSTANT_EXPRESSION_RESULT)
/Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Tone.cpp: 319 in tone(unsigned char, unsigned int, unsigned long)()
** CID 59631: Missing break in switch (MISSING_BREAK)
/Marlin_main.cpp: 1187 in process_commands()()
** CID 59632: Missing break in switch (MISSING_BREAK)
/Marlin_main.cpp: 1193 in process_commands()()
** CID 59633: Out-of-bounds write (OVERRUN)
/temperature.cpp: 914 in disable_heater()()
** CID 59634: Out-of-bounds write (OVERRUN)
/temperature.cpp: 913 in disable_heater()()
** CID 59635: Out-of-bounds read (OVERRUN)
/temperature.cpp: 626 in analog2temp(int, unsigned char)()
** CID 59636: Out-of-bounds read (OVERRUN)
/temperature.cpp: 620 in analog2temp(int, unsigned char)()
** CID 59637: Out-of-bounds write (OVERRUN)
/temperature.cpp: 202 in PID_autotune(float, int, int)()
** CID 59638: Out-of-bounds read (OVERRUN)
/temperature.cpp: 214 in PID_autotune(float, int, int)()
** CID 59639: Out-of-bounds write (OVERRUN)
/Marlin_main.cpp: 2278 in process_commands()()
** CID 59640: Out-of-bounds read (OVERRUN)
/Marlin_main.cpp: 1802 in process_commands()()
** CID 59641: Uninitialized scalar field (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 51 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()
** CID 59642: Uninitialized scalar field (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 45 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()
** CID 59643: Uninitialized scalar field (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 32 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()
________________________________________________________________________________________________________
*** CID 59629: Unchecked return value (CHECKED_RETURN)
/Marlin_main.cpp: 2154 in process_commands()()
2148 }
2149 #endif
2150 }
2151 }
2152 break;
2153 case 85: // M85
CID 59629: Unchecked return value (CHECKED_RETURN)
Calling "code_seen" without checking return value (as is done elsewhere 66 out of 67 times).
2154 code_seen('S');
2155 max_inactive_time = code_value() * 1000;
2156 break;
2157 case 92: // M92
2158 for(int8_t i=0; i < NUM_AXIS; i++)
2159 {
________________________________________________________________________________________________________
*** CID 59630: Operands don't affect result (CONSTANT_EXPRESSION_RESULT)
/Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Tone.cpp: 319 in tone(unsigned char, unsigned int, unsigned long)()
313 else
314 {
315 // two choices for the 16 bit timers: ck/1 or ck/64
316 ocr = F_CPU / frequency / 2 - 1;
317
318 prescalarbits = 0b001;
CID 59630: Operands don't affect result (CONSTANT_EXPRESSION_RESULT)
"ocr > 65535U" is always false regardless of the values of its operands. This occurs as the logical operand of if.
319 if (ocr > 0xffff)
320 {
321 ocr = F_CPU / frequency / 2 / 64 - 1;
322 prescalarbits = 0b011;
323 }
324
________________________________________________________________________________________________________
*** CID 59631: Missing break in switch (MISSING_BREAK)
/Marlin_main.cpp: 1187 in process_commands()()
1181 case 2: // G2 - CW ARC
1182 if(Stopped == false) {
1183 get_arc_coordinates();
1184 prepare_arc_move(true);
1185 return;
1186 }
CID 59631: Missing break in switch (MISSING_BREAK)
The above case falls through to this one.
1187 case 3: // G3 - CCW ARC
1188 if(Stopped == false) {
1189 get_arc_coordinates();
1190 prepare_arc_move(false);
1191 return;
1192 }
________________________________________________________________________________________________________
*** CID 59632: Missing break in switch (MISSING_BREAK)
/Marlin_main.cpp: 1193 in process_commands()()
1187 case 3: // G3 - CCW ARC
1188 if(Stopped == false) {
1189 get_arc_coordinates();
1190 prepare_arc_move(false);
1191 return;
1192 }
CID 59632: Missing break in switch (MISSING_BREAK)
The above case falls through to this one.
1193 case 4: // G4 dwell
1194 LCD_MESSAGEPGM(MSG_DWELL);
1195 codenum = 0;
1196 if(code_seen('P')) codenum = code_value(); // milliseconds to wait
1197 if(code_seen('S')) codenum = code_value() * 1000; // seconds to wait
1198
________________________________________________________________________________________________________
*** CID 59633: Out-of-bounds write (OVERRUN)
/temperature.cpp: 914 in disable_heater()()
908 WRITE(HEATER_0_PIN,LOW);
909 #endif
910 #endif
911
912 #if defined(TEMP_1_PIN) && TEMP_1_PIN > -1
913 target_temperature[1]=0;
CID 59633: Out-of-bounds write (OVERRUN)
Overrunning array "soft_pwm" of 1 bytes at byte offset 1 using index "1".
914 soft_pwm[1]=0;
915 #if defined(HEATER_1_PIN) && HEATER_1_PIN > -1
916 WRITE(HEATER_1_PIN,LOW);
917 #endif
918 #endif
919
________________________________________________________________________________________________________
*** CID 59634: Out-of-bounds write (OVERRUN)
/temperature.cpp: 913 in disable_heater()()
907 #if defined(HEATER_0_PIN) && HEATER_0_PIN > -1
908 WRITE(HEATER_0_PIN,LOW);
909 #endif
910 #endif
911
912 #if defined(TEMP_1_PIN) && TEMP_1_PIN > -1
CID 59634: Out-of-bounds write (OVERRUN)
Overrunning array "target_temperature" of 1 2-byte elements at element index 1 (byte offset 2) using index "1".
913 target_temperature[1]=0;
914 soft_pwm[1]=0;
915 #if defined(HEATER_1_PIN) && HEATER_1_PIN > -1
916 WRITE(HEATER_1_PIN,LOW);
917 #endif
918 #endif
________________________________________________________________________________________________________
*** CID 59635: Out-of-bounds read (OVERRUN)
/temperature.cpp: 626 in analog2temp(int, unsigned char)()
620 if(heater_ttbl_map[e] != NULL)
621 {
622 float celsius = 0;
623 uint8_t i;
624 short (*tt)[][2] = (short (*)[][2])(heater_ttbl_map[e]);
625
CID 59635: Out-of-bounds read (OVERRUN)
Overrunning array "heater_ttbllen_map" of 1 bytes at byte offset 1 using index "e" (which evaluates to 1).
626 for (i=1; i<heater_ttbllen_map[e]; i++)
627 {
628 if (PGM_RD_W((*tt)[i][0]) > raw)
629 {
630 celsius = PGM_RD_W((*tt)[i-1][1]) +
631 (raw - PGM_RD_W((*tt)[i-1][0])) *
________________________________________________________________________________________________________
*** CID 59636: Out-of-bounds read (OVERRUN)
/temperature.cpp: 620 in analog2temp(int, unsigned char)()
614 if (e == 0)
615 {
616 return 0.25 * raw;
617 }
618 #endif
619
CID 59636: Out-of-bounds read (OVERRUN)
Overrunning array "heater_ttbl_map" of 1 2-byte elements at element index 1 (byte offset 2) using index "e" (which evaluates to 1).
620 if(heater_ttbl_map[e] != NULL)
621 {
622 float celsius = 0;
623 uint8_t i;
624 short (*tt)[][2] = (short (*)[][2])(heater_ttbl_map[e]);
625
________________________________________________________________________________________________________
*** CID 59637: Out-of-bounds write (OVERRUN)
/temperature.cpp: 202 in PID_autotune(float, int, int)()
196 {
197 soft_pwm_bed = (MAX_BED_POWER)/2;
198 bias = d = (MAX_BED_POWER)/2;
199 }
200 else
201 {
CID 59637: Out-of-bounds write (OVERRUN)
Overrunning array "soft_pwm" of 1 bytes at byte offset 1 using index "extruder" (which evaluates to 1).
202 soft_pwm[extruder] = (PID_MAX)/2;
203 bias = d = (PID_MAX)/2;
204 }
205
206
207
________________________________________________________________________________________________________
*** CID 59638: Out-of-bounds read (OVERRUN)
/temperature.cpp: 214 in PID_autotune(float, int, int)()
208
209 for(;;) {
210
211 if(temp_meas_ready == true) { // temp sample ready
212 updateTemperaturesFromRawValues();
213
CID 59638: Out-of-bounds read (OVERRUN)
Overrunning array "current_temperature" of 1 4-byte elements at element index 1 (byte offset 4) using index "extruder" (which evaluates to 1).
214 input = (extruder<0)?current_temperature_bed:current_temperature[extruder];
215
216 max=max(max,input);
217 min=min(min,input);
218 if(heating == true && input > temp) {
219 if(millis() - t2 > 5000) {
________________________________________________________________________________________________________
*** CID 59639: Out-of-bounds write (OVERRUN)
/Marlin_main.cpp: 2278 in process_commands()()
2272 tmp_extruder = code_value();
2273 if(tmp_extruder >= EXTRUDERS) {
2274 SERIAL_ECHO_START;
2275 SERIAL_ECHO(MSG_M200_INVALID_EXTRUDER);
2276 }
2277 }
CID 59639: Out-of-bounds write (OVERRUN)
Overrunning array "volumetric_multiplier" of 1 4-byte elements at element index 1 (byte offset 4) using index "tmp_extruder" (which evaluates to 1).
2278 volumetric_multiplier[tmp_extruder] = 1 / area;
2279 }
2280 break;
2281 case 201: // M201
2282 for(int8_t i=0; i < NUM_AXIS; i++)
2283 {
________________________________________________________________________________________________________
*** CID 59640: Out-of-bounds read (OVERRUN)
/Marlin_main.cpp: 1802 in process_commands()()
1796 int pin_status = code_value();
1797 int pin_number = LED_PIN;
1798 if (code_seen('P') && pin_status >= 0 && pin_status <= 255)
1799 pin_number = code_value();
1800 for(int8_t i = 0; i < (int8_t)sizeof(sensitive_pins); i++)
1801 {
CID 59640: Out-of-bounds read (OVERRUN)
Overrunning array "sensitive_pins" of 28 2-byte elements at element index 55 (byte offset 110) using index "i" (which evaluates to 55).
1802 if (sensitive_pins[i] == pin_number)
1803 {
1804 pin_number = -1;
1805 break;
1806 }
1807 }
________________________________________________________________________________________________________
*** CID 59641: Uninitialized scalar field (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 51 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()
45 }
46
47 LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t enable,
48 uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3)
49 {
50 init(1, rs, 255, enable, d0, d1, d2, d3, 0, 0, 0, 0);
CID 59641: Uninitialized scalar field (UNINIT_CTOR)
Non-static class member "_initialized" is not initialized in this constructor nor in any functions that it calls.
51 }
52
53 void LiquidCrystal::init(uint8_t fourbitmode, uint8_t rs, uint8_t rw, uint8_t enable,
54 uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
55 uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
56 {
________________________________________________________________________________________________________
*** CID 59642: Uninitialized scalar field (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 45 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()
39 }
40
41 LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable,
42 uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3)
43 {
44 init(1, rs, rw, enable, d0, d1, d2, d3, 0, 0, 0, 0);
CID 59642: Uninitialized scalar field (UNINIT_CTOR)
Non-static class member "_initialized" is not initialized in this constructor nor in any functions that it calls.
45 }
46
47 LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t enable,
48 uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3)
49 {
50 init(1, rs, 255, enable, d0, d1, d2, d3, 0, 0, 0, 0);
________________________________________________________________________________________________________
*** CID 59643: Uninitialized scalar field (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 32 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()
26
27 LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable,
28 uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
29 uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
30 {
31 init(0, rs, rw, enable, d0, d1, d2, d3, d4, d5, d6, d7);
CID 59643: Uninitialized scalar field (UNINIT_CTOR)
Non-static class member "_initialized" is not initialized in this constructor nor in any functions that it calls.
32 }
33
34 LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t enable,
35 uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
36 uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
37 {
________________________________________________________________________________________________________
To view the defects in Coverity Scan visit, http://scan.coverity.com/projects/2224?tab=overview
2014-05-14 21:59:48 +02:00
Neil Darlow
e541323741
Merge https://github.com/ErikZalm/Marlin into Marlin_v1
2014-05-09 15:02:50 +01:00
Alejandro Romero
1c9a70cee9
Support for Gen3 Monolithic electronics
...
Techzone Monotronics support, ignoring the tip manager and using fan connector as on Sprinter FW
TODO: Add support for tipmanager
2014-05-06 19:24:20 -05:00
daid
2acd3792fc
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2014-05-01 12:03:47 +02:00
daid
8b4c4aa5c3
Add feature to check&retry CRC read errors on SD.
2014-05-01 12:03:41 +02:00
nothinman
ce76843dc3
Merge pull request #897 from Makible/5DPrint_D8_Board_Support
...
5DPrint D8 Controller Board Support
2014-04-28 22:11:28 +01:00
Cameron Lai
ad5c8cbba9
Add safety limit for hot bed power in example configuration
2014-04-25 17:04:24 +08:00
Cameron Lai
6460709d92
Fix bug in PID Autotune report
2014-04-25 16:05:05 +08:00
Cameron Lai
105bebb466
Fix for pin mapping for SDSS pin and Fan pin, so Arduino library can be used
2014-04-25 12:57:47 +08:00
Cameron Lai
97ead2eccb
Fix for microstepping pin mapping, not using Teensy pin mapping, but Arduino's default pin mapping so Arduino library can be used
2014-04-25 12:57:11 +08:00
Cameron Lai
d85411f13a
Revert "Fix for stepper microstepping"
...
This reverts commit eea3ba5588
.
2014-04-25 12:41:56 +08:00
Cameron Lai
7c7f2d094e
Revert "Fix for reading microstepping resolution"
...
This reverts commit 2715f6ddbf
.
2014-04-25 12:41:48 +08:00
Cameron Lai
e2d703377a
Enable EEPROM by default for 5DPrint D8 Controller Board in example configuration
2014-04-24 19:15:35 +08:00
Cameron Lai
2715f6ddbf
Fix for reading microstepping resolution
2014-04-24 17:48:33 +08:00
Cameron Lai
39e9b133f3
Add example configuration for Makibox printer, which uses the 5DPrint D8 Driver Board
2014-04-24 17:06:07 +08:00
Cameron Lai
da6b536182
Add 5DPrint D8 Driver Board info and temperature table for Makibox hot bed
2014-04-24 16:49:42 +08:00
Cameron Lai
3a8e36f19e
Add Digipot config for 5DPrint D8 Driver Board
2014-04-24 12:56:46 +08:00
Cameron Lai
eea3ba5588
Fix for stepper microstepping
2014-04-24 12:56:06 +08:00
Cameron Lai
1cbcbb0971
Add makibox machine information
2014-04-24 12:55:21 +08:00
Cameron Lai
2fa514e88a
Add port for 5DPrint D8 Driver board
2014-04-24 12:55:00 +08:00
nothinman
b9126ab497
Merge pull request #894 from MyMakibox/Marlin_v1
...
Update Marlin_main.cpp
2014-04-23 16:23:56 +01:00
MyMakibox
21ec6b88c3
Update Marlin_main.cpp
...
Added description of autotemp flags to M109
2014-04-23 17:33:26 +08:00
MyMakibox
e4dc80d3d3
Update Configuration_adv.h
...
Corrected error in AUTOTEMP instructions
2014-04-23 17:30:07 +08:00
Neil Darlow
6adbdf42e0
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2014-04-21 15:10:57 +01:00
whosawhatsis
27d544ac25
Speed up QUICK_HOME feedrate for diagonal move
...
Speed up the diagonal move while still keeping each individual axis at
or below its homing feedrate.
2014-04-19 17:29:20 -07:00
nothinman
013793bbe9
Merge pull request #878 from koldoartola/Marlin_v1
...
Added new language (Basque-Euskera)
2014-04-13 22:37:39 +01:00
koldo artola
e5b70237c7
Added new language (Basque-Euskera)
...
Added:
* new language (Basque-Euskera)
* some minor corrections for Spanish
* added 2 new constants for every language (required for a minor change
I am preparing to ultralcd.cpp)
2014-04-13 22:19:38 +02:00
Nutz95
ed6f4a71c5
fix wrong temptable index
2014-04-13 18:00:55 +02:00
Nutz95
3161740df9
This table is made for thermistor 3950 (can be found on ebay for cheap)
...
it's caracteristics are :
R25℃ ;100KΩ±1%
B Value(R25/50℃):3990K 1%
Dissipation Factor(mW/℃):1.1~1.6 In still Air
Thermal Time Constant(S):10~17 In Still Air
Operating temperature range: (-50~+260°C)
Dimension: 1.8mm Dia X4.1mm
Lead Length :30mm
This table was found on the following blogs:
http://cae2100.wordpress.com/2014/03/08/beta3950-thermistor-table-for-marlin/
and
http://microfabricator.com/articles/view/id/531ad7e59aad9d3131000000/beta-3950-thermistor-table-for-marlin
2014-04-13 17:03:20 +02:00
nothinman
086ff1644f
Merge pull request #852 from pixatintes/patch-1
...
Update language.h
2014-04-13 00:46:17 +01:00
nothinman
3ffc9651b1
Merge pull request #845 from DerSchultze/Sanguinololu-servo
...
Added servo pin assignments to Sanguinololu
2014-04-13 00:37:28 +01:00
nothinman
357b87b498
Merge pull request #826 from paciotti/patch-1
...
Configuration_adv.h
2014-04-13 00:22:25 +01:00
neildarlow
95ad6ec9a1
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2014-04-12 22:20:45 +01:00
Gabe Rosenhouse
27a7cf9fcf
use existing strings
2014-04-07 05:01:48 -05:00
Gabe Rosenhouse
d3f305332a
Allowable range now includes default value
2014-04-06 19:45:56 -05:00
Gabe Rosenhouse
b0aeac117f
Adjustable Z probe offset, via custom M-code
2014-04-06 19:45:56 -05:00
Neil Darlow
73b380d8d2
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2014-04-06 19:15:29 +01:00
nothinman
c23376f2e7
Merge pull request #837 from whosawhatsis/fwretract
...
FWRETRACT in mm/s
2014-04-04 11:47:58 +01:00
nothinman
dfb98101e4
Change CONTROLLERFAN_PIN for board 35 to -1, as it would conflict with board's 33 extruder pin, causing burnout (it's the same board, just different number of fans/extruders, therefore should be pin-compatible)
2014-04-03 18:05:48 +01:00
nothinman
f1501317ca
Merge pull request #860 from drf5n/therm3950
...
thermistortables.h: Add comments that table 60 uses beta=3950.
2014-04-02 18:29:57 +01:00
nothinman
9a5d23d96f
Merge pull request #866 from sakunamary/Marlin_v1
...
fix bug for dual extruders not working
2014-04-02 18:27:42 +01:00
nothinman
303ee67896
Merge pull request #864 from whosawhatsis/M200
...
fix bug in M200 with multiple extruders
2014-04-02 18:26:15 +01:00
Tim
8759508319
fix bug for dual extruders not working
...
some guy find that marlin not working good for dual extruders delta .
when type T0 or T1 to active extruder and E0 or E1 move causing XYZ
motion . so i locales the bugs and fix it , I have dry run the fix.
2014-04-01 09:26:19 +08:00
whosawhatsis
a65564eef6
fix bug in M200 with multiple extruders
2014-03-30 11:42:22 -07:00
whosawhatsis
aeaf9b9312
fix bug in M200 with multiple extruders
2014-03-30 11:41:57 -07:00
Neil Darlow
89f78b0b80
Allow use of either SD Card slot when LCD Panel is configured.
...
Preference is for Controller SD slot before LCD Panel slot when both are occupied.
2014-03-27 17:02:17 +00:00
David Forrest
b0093a1513
thermistortables.h: Add comments that table 60 uses beta=3950.
2014-03-26 23:41:10 -04:00
pixatintes
a3530d1141
Update language.h
...
Updated to latest version.
2014-03-23 18:06:48 +01:00
pixatintes
990e770e15
Update language.h
...
Added catalan language
2014-03-23 10:30:08 +01:00
Dan Nixon
f643f4d674
Test and refactor
2014-03-21 20:42:00 +00:00
neildarlow
bbe8fbe13d
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2014-03-21 18:27:14 +00:00
Dim3nsioneer
c8cdd1fc6f
Bugfixes for language option 6 (russian)
2014-03-19 14:27:38 +01:00
Dim3nsioneer
7395dafc1e
semantic changes in language.h
2014-03-19 12:30:50 +01:00
Dim3nsioneer
fad2a60ce6
Corrections for preheat extension in language.h
2014-03-19 12:23:35 +01:00
Ralf Schultz
eecda434fb
Sanguinololu servo pins set default disabled
2014-03-18 08:25:20 +01:00
Dim3nsioneer
944ced87c5
Extended Preheat options
...
Preheat LCD menus base on code by D-Base
2014-03-17 18:37:46 +01:00
Ralf Schultz
06709ad60e
Added servo pin assignments to Sanguinololu
2014-03-17 15:45:13 +01:00
Dim3nsioneer
3906f27c46
Individual extruder flow rate
...
Extension of M221, Tune menu
2014-03-15 18:09:46 +01:00
Dan Nixon
a38c90ee84
Added estop handling
2014-03-15 15:56:15 +00:00
ErikZalm
a00cec8b71
Merge pull request #833 from mattsch/optional_feedrate_multiplier
...
Add support for disabling encoder control for feedrate multiplier
2014-03-15 15:41:45 +01:00
neildarlow
af8be9013b
Merge branch 'lcd_detected' of https://github.com/whosawhatsis/Marlin into Marlin_v1
2014-03-15 07:24:47 +00:00
whosawhatsis
0ddee3c7db
Prevent SD card insertion from causing a hang when using LiquidTWI2 device detection
2014-03-14 18:46:25 -07:00
Dan Nixon
272072fa20
Added M112
2014-03-14 23:19:43 +00:00
whosawhatsis
aab61e63c3
FWRETRACT in mm/s
...
Firmware retraction now stores the retract and recover speeds in mm/s
instead of mm/min. This makes it match the units of the maximum
feedrate, and fixes problems with modifying the value via LCD control
panel. From gcode, the values are still taken in mm/min to match the
units of G1 and similar, and they are converted to mm/s before they are
stored.
I also lowered the default retract feedrate to make it less likely to
cause problems for geared extruders when the user hasn’t bothered to
set a reasonable maximum feedrate, though users should be setting both
of these values to suit their hardware.
2014-03-14 15:17:28 -07:00
Matthew Schick
6cd85e6008
Add support for disabling encoder control for feedrate multiplier
...
Signed-off-by: Matthew Schick <matthew.schick@gmail.com>
2014-03-12 18:13:50 -04:00
blddk
09af1b90b8
Added CHDK support
...
Added CHDK support to take pictures instead of doing an IR command, see more about how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
2014-03-10 21:57:08 +01:00
blddk
765b2da3d4
Added CHDK support
...
Added so M240 can be used to trigger CHDK instead of sending an IR signal, see more about CHDK here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
2014-03-10 21:52:33 +01:00
paciotti
881e348eed
Update Configuration_adv.h
...
Increase Z_HOME_RETRACT_MM to 2mm default to avoid end stop not switching during retract.
2014-03-08 22:35:05 +01:00
neildarlow
5a332df47e
Merge https://github.com/ErikZalm/Marlin into Marlin_v1
2014-03-06 20:56:44 +00:00
Tommi Lamberg
15d1b8d719
Fixed finnish translation
...
- Fixed Few finnish transalations
- Removed duplicate contrast define
2014-03-05 14:02:52 +02:00
neildarlow
7325d7102e
Activate LiquidTWI2 device detection and space-pad LCD status line.
2014-03-03 21:01:27 +00:00
ErikZalm
7f76a0e064
Merge pull request #813 from drf5n/PID_DEBUG
...
temperature.cpp: Fix PID_DEBUG compile error.
2014-02-26 17:31:48 +01:00
Erik van der Zalm
fcd8524b6e
Only increase EEPROM version for DELTA printers.
2014-02-26 17:29:27 +01:00
Jim Morris
8ea5665ee2
Merge remote-tracking branch 'origin/Marlin_v1' into add/M665-set-delta-configuration
...
Conflicts:
Marlin/Marlin_main.cpp
2014-02-26 00:19:28 -08:00
David Forrest
8c4377dd63
temperature.cpp: Fix PID_DEBUG compile error.
2014-02-26 00:44:22 -05:00
ErikZalm
fde8c2c310
Merge pull request #807 from Cylindric3D/typofixes_upstream5
...
Various typo fixes #5 - only in comments, no code changes.
2014-02-25 18:49:41 +01:00
Cylindric
fdce91192e
Various typo fixes - only in comments, no code changes.
2014-02-25 10:01:15 +00:00
Cylindric
d819c55395
Various typo fixes - only in comments, no code changes.
2014-02-25 09:52:58 +00:00
ErikZalm
fd4542f33a
Merge pull request #805 from whosawhatsis/M200
...
autretract fix
2014-02-24 22:35:08 +01:00
ErikZalm
e8291ed728
Merge pull request #802 from Makers-Tool-Works/Marlin_v1
...
Clarify which PID values to enter
2014-02-24 22:31:13 +01:00
ErikZalm
465b654d24
Merge pull request #797 from Cylindric3D/update_menu_plan
...
Update menu plan
2014-02-24 22:30:19 +01:00
ErikZalm
88506a80c3
Merge pull request #789 from smiler/Marlin_v1
...
Fixed typo.
2014-02-24 22:26:31 +01:00
ErikZalm
b514d3c87f
Merge pull request #781 from Cylindric3D/typofixes_upstream
...
Various typo fixes #3 - only in comments, no code changes.
2014-02-24 22:25:38 +01:00
whosawhatsis
77df0d689a
autretract fix
...
I made these changes previously, but I can’t find the commit now. This
reapplies the changes to get auto retract working again.
Conflicts:
Marlin/Configuration_adv.h
Marlin/Marlin_main.cpp
2014-02-24 13:24:38 -08:00
ErikZalm
cc5f1d475c
Merge pull request #772 from ellensp/Marlin_v1
...
Updated gen3+ board pins names to current convention
2014-02-24 22:22:15 +01:00
Cylindric
91759dede6
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into typofixes_upstream
2014-02-24 17:29:37 +00:00
Cylindric
557217fc05
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into update_menu_plan
2014-02-24 17:29:24 +00:00
RoyOnWheels
aee63afccd
Clarify which PID values to enter
...
Users can be confused as to which values to enter after a PID tune. Updating the message to help clarity it.
New message: "PID Autotune finished! Put the last Kp, Ki and Kd constants from above into Configuration.h"
Old message: "PID Autotune finished! Put the Kp, Ki and Kd constants into Configuration.h"
2014-02-23 14:36:50 -08:00
Gabe Rosenhouse
99f6326544
Remove unnecessary dependency on time.h from qr_solve.cpp
...
Fixed compiler errors on Ubuntu using arduino-core
2014-02-20 16:43:37 -08:00
Cylindric
ea669cb504
Fix some extra and some missing tabs, to make the file consistent.
2014-02-20 14:28:29 +00:00
Cylindric
b46a1b6360
Update the menu plan document with the current menu as per ultralcd.cpp.
2014-02-20 14:20:27 +00:00
Cylindric
3cc7626d1f
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into update_menu_plan
2014-02-20 14:12:10 +00:00
Gabe Rosenhouse
174b8d99d5
Simplify 3-point probing using new code only
2014-02-19 21:48:05 -08:00
Gabe Rosenhouse
3b718b816c
better documentation
2014-02-19 14:04:37 -08:00
Gabe Rosenhouse
34fd59c370
ABL at any points
2014-02-19 13:18:21 -08:00
Cylindric
541155ea87
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into typofixes_upstream
2014-02-19 15:52:18 +00:00
alexborro
9fa328e5c8
Merge pull request #793 from MissionSt/use_axis_enums
...
Use constants instead of numeric literals
2014-02-19 10:15:57 -03:00
Gabe Rosenhouse
f308a8af91
update comment
2014-02-19 01:06:24 -08:00
Gabe Rosenhouse
357e31270a
Prevent G29 without first homing in X and Y
...
If position is unknown, then G29 can be dangerous.
2014-02-19 00:51:43 -08:00
Gabe Rosenhouse
d2d7d186b5
Use descriptive constants, more
2014-02-19 00:10:17 -08:00
Gabe Rosenhouse
2ccdf4f36d
Use descriptive constants instead of numeric literals
2014-02-19 00:02:59 -08:00
Christian Axelsson
c00383f286
Fixed typo.
2014-02-18 18:50:12 +01:00
Cylindric
60f72a78a9
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into typofixes_upstream
2014-02-18 17:31:58 +00:00
nothinman
abba7a0003
Merge pull request #782 from marcovannoord/Marlin_v1
...
Added dutch to language.h
2014-02-18 16:19:50 +00:00
Cylindric
b868d668fa
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into typofixes_upstream
2014-02-18 12:11:01 +00:00
Marco
8212d8d543
Revert "Fixed small typo that would prevent compiling"
...
This reverts commit 51ae4881ab
.
2014-02-18 10:40:25 +01:00
daid
46bae30573
Merge pull request #776 from whosawhatsis/fwretract
...
Fwretract fixes, cleanup
2014-02-18 10:39:28 +01:00
Marco
51ae4881ab
Fixed small typo that would prevent compiling
2014-02-18 09:47:36 +01:00
Marco
498d76fd79
Fixed some messages where the text shown on the screen was more than 17 characters
2014-02-18 09:40:10 +01:00
Jim Morris
af9395ac2e
Add M605 to dynamically set delta configuration
...
Save above configs in eeprom
fix docs in createTemperatureLookupMarlin.py
add missing azteegX3pro digipot settings in delta example config
2014-02-17 20:50:59 -08:00
nothinman
fd42f0d226
Merge pull request #783 from MissionSt/fix/syntax-error
...
Fix compile error
2014-02-17 20:59:43 +00:00
nothinman
96217bf36a
Merge pull request #777 from PxT/M114
...
Add whitespace to M114 output
2014-02-17 18:07:47 +00:00
Marco
cf5c3b6610
Added dutch to language.h
2014-02-17 17:00:50 +01:00
Gabe Rosenhouse
d1c64b9dc4
Fix syntax error introduced in 477b6fa1d
2014-02-17 07:56:19 -08:00
Cylindric
5d50819791
Various typo fixes - only in comments, no code changes.
2014-02-17 13:04:44 +00:00
nothinman
3f455889d0
Merge pull request #769 from Cylindric3D/typofixes_1
...
Various typo fixes - only in comments, no code changes.
2014-02-17 11:30:01 +00:00
nothinman
4ddedb3b27
Merge pull request #780 from Cylindric3D/typofixes_2
...
Various typo fixes #2 - only in comments, no code changes.
2014-02-17 11:29:18 +00:00
nothinman
d4ba23bc28
Merge pull request #770 from josefpavlik/Marlin_v1
...
Marlin v1
2014-02-17 11:27:05 +00:00
nothinman
bbb424bd2f
Merge pull request #779 from MissionSt/makefile-fix-abl
...
Makefile fixes
2014-02-17 11:22:34 +00:00
Cylindric
8f0cee2a14
Various typo fixes - only in comments, no code changes.
2014-02-17 10:58:36 +00:00
Cylindric
08263ae66e
Merge branch 'Marlin_v1' into typofixes_1
2014-02-17 10:28:20 +00:00
Gabe Rosenhouse
5bd09d26e2
Makefile works with auto bed leveling
2014-02-16 23:23:29 -08:00
Gabe Rosenhouse
b45beeffd6
typo fix in Makefile
2014-02-16 23:23:29 -08:00
Paul Telford
306588925d
Add whitespace to M114 output
2014-02-16 21:01:19 -08:00
whosawhatsis
c43838bb1e
disable auto retract by default
...
This should make it safe to enable FWRETRACT by default, with
autoretract (which should now be fixed) only enabled by M209. FWRETRACT
should probably now default to enabled (to make G10/G11 and M207-209
available, without changing functionality when they are not used), but
I’ll save that for another pull request/discussion.
2014-02-16 19:04:54 -08:00
whosawhatsis
99f0e44864
Move FWRETRACT defaults to configuration_adv.h
2014-02-16 19:00:28 -08:00
whosawhatsis
66e3869138
Fix autoretract
...
This takes the (now working) G10/G11 code and moves it to a function,
which is called by G10 and G11, and also called by G1 if autoretract is
enabled and a retract/recover move is detected.
2014-02-16 18:59:04 -08:00
whosawhatsis
2f2459c0db
Fix G10/G11 Z-lift
2014-02-16 18:15:34 -08:00
Gabe Rosenhouse
8c5675c290
Use language.h instead of English literals for "bed"
2014-02-16 17:16:00 -08:00
Gabe Rosenhouse
0f7393a13e
Refactor 'accurate' auto bed leveling to use probe_pt()
2014-02-16 10:44:15 -08:00
Gabe Rosenhouse
c4fbb44d6d
Refactor 3-point auto bed leveling to use probe_pt()
2014-02-16 10:44:08 -08:00
Gabe Rosenhouse
ad2c6488c7
Add probe_pt(), useful for auto bed leveling
2014-02-16 10:38:29 -08:00
Peter
c9c83a4560
Updated gen3+ board pins names to current convention
2014-02-16 00:47:06 +13:00
Mark Hanford
ab0d3c4fb3
Various typo fixes - only in comments, no code changes.
2014-02-14 11:48:24 +00:00
Josef Pavlik
477b6fa1df
move engaged from lcd console refreshes power off timeout
2014-02-14 12:37:21 +01:00
Josef Pavlik
831fc2a952
Pt100 and Pt1000 temperature sensors handling
2014-02-14 12:26:27 +01:00
nothinman
7dcd350941
A few changes to Russian, changed LCD strings to be <=17 characters.
2014-02-13 11:58:14 +00:00
daid
c31bb2b7ad
Only show the ZProbe offset when auto-bed-leveling is enabled.
2014-02-13 11:48:55 +01:00
daid
46f5bea19f
Add configurable beep for UltiPanel.
2014-02-13 11:17:33 +01:00
daid
d16a770855
Ultimainboard 2.x does not has a PS_ON pin.
2014-02-13 10:57:03 +01:00
daid
71bb3a8133
Add comments for Ultimainboard 2.0 configuration.
2014-02-13 10:53:46 +01:00
daid
9b7d87e885
Remove duplicate contrast define.
2014-02-13 10:50:17 +01:00
daid
816f0a678a
Merge pull request #768 from whosawhatsis/Marlin_v1
...
multiple FWretract fixes
2014-02-13 09:14:57 +01:00
whosawhatsis
6e43398509
G10/G11 bugfixes
...
Previous version was broken by using G92 E0 between retract and recover.
2014-02-12 13:03:00 -08:00
whosawhatsis
d6c5c503d4
correct feedrate units in comments for M207/M208
2014-02-12 13:02:47 -08:00
nothinman
15d6116188
Merge pull request #689 from cajun-rat/tidy
...
Use C++ initialization list
2014-02-12 16:38:11 +00:00
Martin Lukasik
0b9ecf3824
Language cleanup, part 1.
2014-02-12 13:21:26 +00:00
whosawhatsis
b5ba5c1465
Merge branch 'Marlin_v1' of https://github.com/whosawhatsis/Marlin into Marlin_v1
2014-02-11 19:06:03 -08:00
whosawhatsis
78e7654601
Keep FWRETRACT values in terms of millimeters when using M200
...
for volumetric E units
2014-02-11 19:05:35 -08:00
whosawhatsis
3f6d44d40b
Keep FWRETRACT values in terms of millimeters when using M200 for volumetric E units
2014-02-11 18:50:11 -08:00
Cylindric
363dc2f0e8
Merge branch 'Marlin_v1' into update_menu_plan
2014-02-12 00:51:16 +00:00
nothinman
5f797ca29f
Updated Polish, changed default firmware URL to Marlin.
2014-02-11 22:38:01 +00:00
Mark Hanford
0778f5f028
Add missing entries to the new Aragonian language.
2014-02-11 14:40:53 +00:00
Mark Hanford
54bab3e0d0
Merge branch 'Marlin_v1' into localisation
...
Conflicts:
Marlin/language.h
2014-02-11 14:35:28 +00:00
Mark Hanford
bdd0211aeb
Move strings in ultralcd.cpp into language.h.
2014-02-11 13:54:43 +00:00
Daniel Martinez
c8e5a82d49
keep English as default lang.
2014-02-09 18:24:24 +01:00
Daniel Martinez
f64592e362
Add Aragonese translation
2014-02-09 18:19:37 +01:00
ErikZalm
ac74f45dc0
Merge pull request #752 from MatixYo/patch-3
...
Update language.h
2014-02-09 17:52:26 +01:00
MatixYo
36086d3ca4
Update language.h
...
Updated Polish translations.
2014-02-07 19:15:51 +01:00
Cylindric
1781031f2d
Update LCD Menu Tree with current options, based on ultralcd.cpp and language.h.
2014-02-07 01:52:44 +00:00
Jim Morris
d485988bec
fix typo
2014-02-05 14:39:45 -08:00
Jim Morris
8a1fd25363
Default is to not define digipot_i2c
2014-02-05 14:28:23 -08:00
Jim Morris
5097c57d3a
Added pins for Azteeg X3 Pro under motherboard 68
2014-02-05 14:25:42 -08:00
Jim Morris
b819fc53ca
Add Azteeg X3 Pro as motherboard 68
...
Add digipot i2c control for MCP4451
Allow M907 to set i2c digipot currents in amps
Fix Makefile to allow Azteeg motherboards
Fix Makefile to allow Wire libraries only
Add beeper pin for Azteeg X3 Pro
2014-02-05 01:47:12 -08:00
ErikZalm
e1ae7952eb
Merge pull request #743 from Opticalworm/Marlin_v1
...
Improved support for panelolu2 encoder and buzzer
2014-02-03 12:33:10 -08:00
David Forrest
a5f53f0cf3
Heater wattage reporting for M105 using EXTRUDER_WATTS and BED_WATTS
2014-02-03 14:50:28 -05:00
Ronald
8d162e5bd7
Improved support for panelolu2 encoder and buzzer
...
I added #define for LCD_FEEDBACK_FREQUENCY_HZ and
LCD_FEEDBACK_FREQUENCY_DURATION_MS which is used to alter the default
buzzer sound.
When selecting Panelolu2 in configuration.h:
- it automatically sets the correct ENCODER_PULSES_PER_STEP and
ENCODER_STEPS_PER_MENU_ITEM.
- if LCD_USE_I2C_BUZZER is defined it will also set the default
LCD_FEEDBACK_FREQUENCY_HZ and LCD_FEEDBACK_FREQUENCY_DURATION_MS
When selecting the sanguinololu 1284p the following is true:
- its now enables LARGE_FLASH
- It enables the gcode M300 when the panelolu2 LCD_USE_I2C_BUZZER is
defined
2014-02-03 07:45:03 +00:00
whosawhatsis
b2c11ba980
Change diameter code to 'D'
...
For some reason that I can’t figure out, the decimal is dropped when
using ’S’ for the code.
Also some minor code improvements to M200.
2014-02-01 18:49:25 -08:00
ErikZalm
61059385a3
Merge pull request #737 from whosawhatsis/M200
...
M200 implementation
2014-02-01 10:37:49 -08:00
whosawhatsis
856edfcc0d
Fixed math
...
This is why I wanted to sleep on the code I wrote while falling asleep
rather than immediately submitting a pull request.
2014-01-31 08:43:11 -08:00
ErikZalm
0d81ae77bc
Merge pull request #727 from drf5n/oversampling
...
temperature.cpp: Actually use OVERSAMPLENR in the oversampling calculation.
2014-01-31 07:09:10 -08:00
ErikZalm
84df13f7d1
Merge pull request #721 from drf5n/lcdOnly
...
Enable basic ULTRA_LCD screen w/o encoders and menus.
2014-01-31 07:07:12 -08:00
ErikZalm
4c7e9502ad
Merge pull request #718 from drf5n/temptableRes
...
createTemperatureLookupMarlin.py: Add resolution comments and format for...
2014-01-31 07:06:02 -08:00
ErikZalm
652a0f6b5a
Merge pull request #717 from drf5n/tpins2
...
fastio.h: Add AT90USBxx_TEENSYPP_ASSIGNMENTS for teensyduino/Lincomatic/...
2014-01-31 07:05:20 -08:00
ErikZalm
96a0cdc541
Merge pull request #716 from drf5n/maketeensy
...
Makefile: Update for Arduino 1.0.5 and Teensyduino dependent boards (HAR...
2014-01-31 07:04:29 -08:00
whosawhatsis
d24df7af2c
M200 implementation
2014-01-31 00:54:19 -08:00
David Forrest
f0b8d5ba3d
createTemperatureLookupMarlin.py: Change comment to refer to actual program name.
2014-01-29 23:34:22 -05:00
David Forrest
50f44d9249
createTemperatureLookupMarlin.py: Truncate to short after application of OVERSAMPLENR for improved resolution.
2014-01-29 23:24:07 -05:00
David Forrest
f5b5dd8038
createTemperatureLookupMarlin.py: Add output of Steinhart-Hart coefficients.
2014-01-29 22:59:47 -05:00
David Forrest
76cf07c3f7
Configuration.h: Use OVERSAMPLENR in dT_PID definition.
2014-01-21 23:25:51 -05:00
David Forrest
476c7193d8
temperature.cpp: Use OVERSAMPLENR in oversampling calculation.
2014-01-21 16:49:03 -05:00
whosawhatsis
f08bb8bb6a
Previous commit borked.
2014-01-19 22:06:45 -08:00
whosawhatsis
b1f8f492c6
Remove previous_millis_cmd update from extruder runout prevention code
...
This seems to defeat the purpose of previous_millis_cmd, preventing the
time elapsed from previous_millis_cmd from ever reaching
max_inactive_time or stepper_inactive_time while the heat was on.
2014-01-19 19:22:08 -08:00
whosawhatsis
8a5eaa3c9b
Fix crash after home bug
...
Fixes a bug in the Extruder Runout Prevention feature that caused the
extruder to move back to “current_position” after a move if it was
activated while the move was in progress. For long home moves (which
are longer than the dimensions of the machine’s working area), this
would cause the machine to crash into the far end of its travel after
homing. This usually occurred on the Z axis, which could result in
damage to the machine if you don’t hit the reset button in time.
2014-01-19 19:11:51 -08:00
David Forrest
61a7256d42
Enable basic ULTRA_LCD screen w/o encoders and menus.
2014-01-17 17:00:47 -05:00
l.lefebvre
fdac8f6cec
Update ConfigurationStore.cpp
...
Unable to compile if ENABLE_AUTO_BED_LEVELING is not set (not set by default).
2014-01-17 16:09:58 +01:00
Alex Borro
05932e4458
Add Z Probe Offset to EEPROM and Ultra LCD
2014-01-16 18:13:46 -02:00
David Forrest
7216583b8b
createTemperatureLookupMarlin.py: Add resolution comments and format for Marlin.
2014-01-16 12:40:15 -05:00