2583 Commits

Author	SHA1	Message	Date
Scott Lahteine	d05efa008d	Merge pull request #1825 from shaggythesheep/bugfix_no_heaters ... Bugfix: Temperature checks when no heaters in use	2015-04-06 21:25:22 -07:00
Scott Lahteine	d20f42c883	Don't stow the probe until the last grid point! ... - Address Issue #1682 at hash #issuecomment-89756858	2015-04-06 20:58:09 -07:00
Scott Lahteine	5c2bb05af3	Merge pull request #1839 from AnHardt/fix-statusmessage ... Fix lcd_status_message	2015-04-06 19:08:25 -07:00
Scott Lahteine	d70a4a3847	Merge pull request #1823 from AnHardt/splashscreen ... Disable splash-screen when done once	2015-04-06 18:48:48 -07:00
Scott Lahteine	56aea5f8e5	Merge pull request #1829 from Natealus/Development ... Azteeg X3 Pro Pin fix ups	2015-04-06 18:19:33 -07:00
Scott Lahteine	6a860b99dc	Merge pull request #1828 from Wackerbarth/Configurator ... Update Configurator Files	2015-04-06 18:09:26 -07:00
AnHardt	ac843fbf3b	Fix lcd_status_message ... Because we now can use utf8 with up to 3 bytes per symbol, lcd_status_message[] must be 3*LCD_WIDTH wide. Filling up the message, or cutting to length, are fixed to. Fix for #1832 about at the end.	2015-04-07 02:33:34 +02:00
Scott Lahteine	6d084c017f	Fix typo in FWRETRACT handler ... Should be `retracting` and not `retract`	2015-04-06 17:04:22 -07:00
Edward Patel	d27c82a450	Added check for Delta printers in Mesh, #error not yet supported.	2015-04-06 23:03:06 +02:00
Edward Patel	9a093b2e8f	Added #error + mention not to enable ABL and Mesh at the same time	2015-04-06 19:38:59 +02:00
AnHardt	6ae714894e	Now the simplycistic solution. ... Just and only display splashscreen only once.	2015-04-06 12:43:38 +02:00
AnHardt	d521693641	Revert "Draw content in display loop only when needed" ... This reverts commit bf04a92cc0.	2015-04-06 12:31:31 +02:00
Natealus	b6f2bff461	Azteeg X3 Pro Pin fix ups	2015-04-05 23:34:56 -06:00
Scott Lahteine	d867c18535	Fix compile error with Z_DUAL_ENDSTOPS	2015-04-05 20:48:08 -07:00
Richard Wackerbarth	46474cf2f2	Incorporate @section headers from configurator	2015-04-05 22:39:40 -05:00
Richard Wackerbarth	cf66cb8808	Bring configurator up-to-date	2015-04-05 22:38:15 -05:00
Richard Miles	1a5293c2ce	Prevents MINTEMP / MAXTEMP when no heaters present ... This commit checks whether or not HEATER_0 is in use, and if not, skips the MIN / MAX temperature checks.	2015-04-05 22:27:14 +01:00
Edward Patel	5360158545	Merge branch 'Development-Marlin' into Development	2015-04-05 20:28:44 +02:00
AnHardt	bf04a92cc0	Draw content in display loop only when needed ... Example for splash screen.	2015-04-05 12:53:20 +02:00
AnHardt	9865318f1c	Disable splash-screen when done once ... Splash screen was shown with every display init. That means every time the menus where entered. Note the 2 in the initialisation. The buffer is already written in two steps a 512 byte. Without the 2 only the upper half is shown.	2015-04-05 12:24:01 +02:00
Scott Lahteine	53eb662908	Have the configurator read from MarlinFirmware repo	2015-04-04 20:19:17 -07:00
Edward Patel	d24ea7c03f	Added Comment in hope of github seeing these updates	2015-04-05 05:14:06 +02:00
Edward Patel	61de6ecd54	Added change to example Configuration.h's	2015-04-05 04:26:35 +02:00
Edward Patel	2f0081bbb5	Compile error fix! Fix for merge artifacts.	2015-04-05 04:16:16 +02:00
Edward Patel	0e6514e7bd	Bug fix! Missed putting z value back in right slot after zigzag mod.	2015-04-05 04:13:34 +02:00
Edward Patel	ea10601406	Merge branch 'Development-Marlin' into Development ... Conflicts: Marlin/Configuration.h Marlin/Marlin_main.cpp	2015-04-05 04:06:02 +02:00
Scott Lahteine	cb02bc6db4	Merge pull request #1817 from AnHardt/dogm_looptest ... Execute DOGM display-loop less often	2015-04-04 17:29:56 -07:00
quillford	b02a55e60f	Fixed scara directions ... Config said for a delta instead of for a scara	2015-04-04 15:26:35 -07:00
Scott Lahteine	6c5f07c5cb	Merge pull request #1813 from thinkyhead/fixup_probing ... Fix bad thermal runaway trigger	2015-04-04 14:41:43 -07:00
AnHardt	340d165a9c	Reduce display updates for dogm displays ... In 'if (encoderPastThreshold || LCD_CLICKED)' lcdDrawUpdate was not set. 'lcd_status_update_delay'-loop was not effective in function lcd_status_screen(). The loop prevented the update of the status screen but not the displays update. Shifted the loop into lcd_update().	2015-04-04 22:02:24 +02:00
AnHardt	418d22d7b3	Revert "Testloop cleanup" ... This reverts commit 6361404b91.	2015-04-04 18:33:36 +02:00
AnHardt	6361404b91	Testloop cleanup ... Shifted condition should still be in.	2015-04-04 17:56:13 +02:00
AnHardt	6d4b3f0d6a	Move the condition before the loop ... Result see: https://youtu.be/AEnBzdu9_tk Dot is moving not so fast -> less executed loops.	2015-04-04 17:49:39 +02:00
AnHardt	4cb7dfc546	Move the 'alive dot' in every displayloop ... Result see: https://www.youtube.com/watch?v=tdu7J0i-c4g Loop is executed several times per display update.	2015-04-04 17:34:28 +02:00
Scott Lahteine	b0f198c153	heater_index above its use	2015-04-04 06:18:08 -07:00
Scott Lahteine	60f8e0386f	More thermal runaway states	2015-04-04 05:45:36 -07:00
Scott Lahteine	f9dbd73652	Fix tr_target_temperature type - float!	2015-04-04 05:25:53 -07:00
Scott Lahteine	c83faa9c5e	Merge pull request #1811 from thinkyhead/fixup_probing ... Compare indices instead of floats for probe actions	2015-04-04 05:14:59 -07:00
Scott Lahteine	61f8394361	Compare indices instead of floats for probe actions	2015-04-04 05:01:16 -07:00
Scott Lahteine	a98183b463	Merge pull request #1809 from Wackerbarth/LanguageCleanup ... Deferring default definition made #undef unnecessary	2015-04-04 04:37:20 -07:00
Scott Lahteine	41ded7e996	Merge pull request #1805 from thinkyhead/fixup_probing ... Optimize coordinate copying, fix EXTRUDER_RUNOUT_PREVENT	2015-04-04 03:49:54 -07:00
Richard Wackerbarth	4119738e69	Deferring default definition made #undef unnecessary	2015-04-04 05:48:07 -05:00
Scott Lahteine	6f06d33be5	Fix missing refresh_cmd_timeout function	2015-04-04 03:47:25 -07:00
Scott Lahteine	2d099a2c70	Fix missing backslash in macro	2015-04-04 03:35:16 -07:00
Scott Lahteine	0f9b29e6c5	Merge pull request #1803 from Natealus/Development ... Z_PROBE_ENDSTOP Pin for Azteeg X3 Pro	2015-04-03 23:45:05 -07:00
Scott Lahteine	0935084141	Fix manage_inactivity ... - Document `manage_inactivity` function - Allow `EXTRUDER_RUNOUT_PREVENT` to work with all extruders - Use faster `memcpy` for copying coordinates	2015-04-03 23:42:50 -07:00
Scott Lahteine	c065da52ec	Spacing and spelling	2015-04-03 22:54:48 -07:00
Scott Lahteine	a3e129e091	Merge pull request #1801 from thinkyhead/fixup_probing ... Minor optimizations	2015-04-03 22:30:01 -07:00
Natealus	ab11f90da0	Z_PROBE_ENDSTOP Pin for Azteeg X3 Pro ... Just a simple #ifdef Z_PROBE_ENDSTOP to define the pin for it. Also has a couple commented lines for switching Z_MIN_PIN if needed.	2015-04-03 23:14:03 -06:00
Scott Lahteine	8680b515b0	Fix missing tmp_extruder -> target_extruder	2015-04-03 22:12:49 -07:00
Natealus	a6ba40ae48	Compiling error temperature.cpp with multiple extruders defined ... It wouldn't compile because of this line in temperature.cpp it turns out it was just a stray ( that didn't line up with the previous lines so I just made it in line with the rest and it compiled fine.	2015-04-03 23:09:31 -06:00
Scott Lahteine	fc3c76fc16	Fix #1800	2015-04-03 22:04:42 -07:00
Scott Lahteine	c185912c19	Latest upstream commits, mostly	2015-04-03 21:58:48 -07:00
Scott Lahteine	1e5c18bb14	Add code_value_short and SERIAL_CHAR	2015-04-03 21:43:30 -07:00
Scott Lahteine	e0d4368cb5	Minor code cleanup, move NUM_AXIS out of config	2015-04-03 20:45:24 -07:00
Scott Lahteine	4c7af484f8	Merge pull request #1787 from thinkyhead/fixup_tr ... Fix: thermal_runaway_protection triggered by target temperature increase	2015-04-03 20:06:56 -07:00
Scott Lahteine	c747becec1	Merge pull request #1796 from thinkyhead/pidbed_temp_eeprom ... Add PIDTEMPBED to EEPROM	2015-04-03 20:03:38 -07:00
Scott Lahteine	84e4edaea7	Add M48 comment for #1794	2015-04-03 19:52:00 -07:00
Scott Lahteine	9ba55baa5b	Track target temperature separately for each heater	2015-04-03 19:42:40 -07:00
Scott Lahteine	528e32a1d4	Fix timeout in thermal_runaway when temperature is set higher	2015-04-03 19:34:55 -07:00
Scott Lahteine	b98ebd517e	disable / enable_all_steppers functions	2015-04-03 19:25:22 -07:00
Scott Lahteine	713953d8c1	Upstream commits, allow no extruder in M105	2015-04-03 19:16:38 -07:00
Scott Lahteine	8f893eb8df	Merge pull request #1798 from thinkyhead/fixup_probing ... Fix probe height at G28 start	2015-04-03 19:03:00 -07:00
Scott Lahteine	dde7e11f8e	Merge branch 'Development' into fixup_tr ... Latest upstream commits	2015-04-03 18:56:52 -07:00
Scott Lahteine	abd7fc36b6	Fix probe height at G28 start	2015-04-03 18:54:55 -07:00
Scott Lahteine	610c8c5471	Merge pull request #1795 from thinkyhead/fixup_probing ... Finish pin tests	2015-04-03 18:44:44 -07:00
Scott Lahteine	e4934164e4	Merge pull request #1790 from Wurstnase/fix_home_z ... fix feedrate for homing z	2015-04-03 18:35:09 -07:00
Scott Lahteine	a469d796e1	Add cleanups needed for #1772	2015-04-03 18:14:57 -07:00
Scott Lahteine	c0ca26cd50	Merge branch 'Development' into fixup_probing ... Latest upstream commits	2015-04-03 18:05:17 -07:00
Scott Lahteine	5c1f08a35f	Merge pull request #1772 from croadfeldt/Merge_cleanup ... Z_PROBE_ENDSTOP	2015-04-03 18:04:31 -07:00
Scott Lahteine	db7b0ea0cf	Merge pull request #1569 from Wackerbarth/Development ... Incorporating Build Numbers	2015-04-03 16:56:31 -07:00
Scott Lahteine	92119d0f7d	Static delta[] for SCARA	2015-04-03 16:46:56 -07:00
Scott Lahteine	007a4bd421	Adjust spacing in view function	2015-04-03 16:41:58 -07:00
Scott Lahteine	424d5495e4	Add PIDTEMPBED to EEPROM	2015-04-03 16:38:05 -07:00
Scott Lahteine	6b919e14c1	Group all universal variables	2015-04-03 15:45:41 -07:00
Scott Lahteine	21cd2e4fae	Merge branch 'Development' into fixup_probing ... Latest upstream commits	2015-04-03 15:32:15 -07:00
Scott Lahteine	0e8182bbf2	Additional pin tests, cleanup	2015-04-03 15:31:35 -07:00
Wurstnase	45565b680d	second wrong feedrate	2015-04-03 18:01:28 +02:00
Wurstnase	581b2aae04	fix feedrate for homing z ... max_feedrate is in mm/s. line_to_destination needs a feedrate in mm/min because there is feedrate/60.	2015-04-03 16:11:32 +02:00
Edward Patel	48b1c3822f	Merge branch 'Development-Marlin' into Development	2015-04-03 00:46:30 +02:00
Richard Wackerbarth	ccdaea51ba	Add KosselPro	2015-04-02 09:20:24 -05:00
Richard Wackerbarth	f4599143eb	Allow M115 to better reflect the build	2015-04-02 09:20:24 -05:00
Richard Wackerbarth	34c7d45879	Hook for Auto-generated Build Version ... The automatic versioning system extracts a build version number from the SCM system That versioning information is written to the file _Version.h, a file that is NOT preserved in the SCM. If such a file will be present, we include it here to utilize the parameters that are defined therein.	2015-04-02 09:20:24 -05:00
Scott Lahteine	c756b4cf07	Comment tweak	2015-04-02 06:11:03 -07:00
AnHardt	23cd54755f	Fix typo in Marlin_main.cpp ... related to current_position[Z_AXIS] and retract_zlift. '+ =' -> '+=' Fix for #1786	2015-04-02 14:50:31 +02:00
Scott Lahteine	e96df67630	Clarify thermal_runaway_protection ... - Add comments documenting `thermal_runaway_protection` - Add an enum for the thermal runaway states - Add macros for temperature helper functions - Fix a glitch with the z probe sled in homeaxis	2015-04-02 05:10:14 -07:00
Chris Roadfeldt	0afe6696f0	Merge remote-tracking branch 'MarlinFirmware/Development' into Merge_cleanup	2015-04-01 19:31:20 -05:00
Chris Roadfeldt	59994bd519	Not doing network admin work, pin not ping... :)	2015-04-01 19:24:42 -05:00
Chris Roadfeldt	916f59e35f	Spaces not tabs in language.h. ... Catch unlikely but possible error and head crash when using Z_PROBE_REPEATABILITY_TEST	2015-04-01 19:22:05 -05:00
Scott Lahteine	66b3b53e76	Merge pull request #1762 from AnHardt/MiMa ... Fix MIN&MAX temperatures again	2015-04-01 16:52:07 -07:00
Edward Patel	6b91b7b411	Mesh bed leveling: Added G29 S3 + finer steps in manual probing. ... * Use "G29 S3 Xn Yn Zn.nn" to modify bad probed point manually * Changed manual Z steps from 0.05 to 0.025 and made brought it to Configuration.h	2015-04-01 21:18:51 +02:00
Chris Roadfeldt	26dc80bf2d	Typo fixed...	2015-04-01 13:47:17 -05:00
Chris Roadfeldt	2966ae2022	Fix Z_PROBE_PING not declared, allows code to compile if Z_PROBE_ENDSTOP ... is not used.	2015-04-01 13:32:25 -05:00
Wurstnase	67d5e7973e	old bump_divisor for cartesian/corexy-printer ... some people are starting to ask why homing is so slow. this is the old standard hard-coded value.	2015-04-01 20:17:49 +02:00
Chris Roadfeldt	bb41edc2ef	Fixed extra #endif	2015-04-01 12:13:25 -05:00
Chris Roadfeldt	a57862e29f	Cleaning up code in prep for merge with upstream.	2015-04-01 11:40:24 -05:00
Chris Roadfeldt	745d9fe1a4	Merge remote-tracking branch 'MarlinFirmware/Development' into Merge_cleanup ... Conflicts: Marlin/Marlin_main.cpp	2015-04-01 10:31:02 -05:00
AnHardt	488666832b	Remove the previously introduced ()	2015-04-01 13:40:05 +02:00
Scott Lahteine	443468df8d	Merge pull request #1771 from AnHardt/iss1770 ... Added new - changed entries from Fix up LCD_PROGRESS_BAR	2015-04-01 02:13:30 -07:00
Scott Lahteine	9593f09b99	Merge pull request #1764 from thinkyhead/probe_leveling ... Fix homing and leveling	2015-04-01 02:00:39 -07:00
Scott Lahteine	72c7de3570	Cleanup M48	2015-04-01 01:48:45 -07:00
Scott Lahteine	97a258b0b0	Clean up, document home_axis	2015-04-01 01:44:13 -07:00
AnHardt	831016b09f	Added new - changed entries from Fix up LCD_PROGRESS_BAR ... for when no LCD is defined. Fix for #1770.	2015-04-01 10:17:17 +02:00
Chris Roadfeldt	a508d835db	Changed Z_PROBE_AND_ENDSTOP to Z_PROBE_ENDSTOP. ... Updated documentation in Configuration.h. Cleaned up and commented some code relating to Z_PROBE_ENDSTOP. Separated Z_MIN_ENDSTOP and Z_PROBE_ENDSTOP completely.	2015-04-01 02:14:55 -05:00
Chris Roadfeldt	fdb4ddbdea	Merge remote-tracking branch 'MarlinFirmware/Development' into Development	2015-04-01 00:52:08 -05:00
atfield90	d273c90d53	Added support for Atmega 1281 chip	2015-04-01 05:15:27 +02:00
Scott Lahteine	1c7391717e	Include sync_plan_position_delta for SCARA also	2015-03-31 19:58:03 -07:00
Scott Lahteine	8231fb166d	Merge pull request #1758 from AnHardt/MENU_MULTIPLIER_ITEM ... Fix: Audio feedback for MENU_MILTIPLIER_ITEM click	2015-03-31 19:29:48 -07:00
Scott Lahteine	0b57a2ab8b	Merge pull request #1757 from bq/Translation-strings ... Added new trasnslatable labels.	2015-03-31 18:56:25 -07:00
Scott Lahteine	18bb6be80e	Fix homing and leveling ... - Include the current Z when raising the axis after and between probing - Add `sync_plan_position_delta` for parity with `sync_plan_position` - Clean up and clarify `M48`, `dock_sled`, and others	2015-03-31 18:52:19 -07:00
AnHardt	3f2e863206	Improve conditions for HAS_TEMP ... and use them in temperuture.h Flattened the if structure - the preprocessor is doing the work - not the Arduino. Arduino.	2015-04-01 02:56:14 +02:00
AnHardt	85f8a26ba4	Fix MIN&MAX temperatures again ... replaced GE0 with th matching GEX in the second row. added some ()	2015-04-01 00:48:04 +02:00
AnHardt	19b11dfdd7	Fix can't enter MENU_MULTIPLIER_ITEM	2015-03-31 18:29:16 +02:00
Chris Roadfeldt	c89b8368ee	Merge remote-tracking branch 'MarlinFirmware/Development' into Development ... Conflicts: Marlin/Marlin_main.cpp	2015-03-31 11:08:36 -05:00
Ivan Galvez Junquera	d08782386b	Added new trasnslatable labels. ... * Added MSG_END_HOUR and MSG_END_MINUTE labels to all language files. * Available translations: EN, FR, DE, ES, IT, PT, PT-BR.	2015-03-31 16:59:43 +02:00
Scott Lahteine	97a69d9b1c	Correct XYZ after obtaining plan_bed_level_matrix ... The current position needs to be updated by using the inverse `plan_bed_level_matrix` on X, Y, and Z. All moves in the planner are transformed by the `plan_bed_level_matrix` from this point forward.	2015-03-31 04:24:13 -07:00
Scott Lahteine	5f6962dd90	Merge pull request #1755 from thinkyhead/fixup_config ... Raise when not retracting	2015-03-31 03:47:01 -07:00
Scott Lahteine	ae89ccd2c7	Use Z_RAISE_BETWEEN_PROBINGS	2015-03-31 03:45:21 -07:00
Scott Lahteine	9a5a7a3f68	Raise when not retracting ... Code to raise the probe before retraction is good, but the code should always raise the probe, not just when retracting	2015-03-31 03:38:03 -07:00
Scott Lahteine	6ff1620fcb	Merge pull request #1753 from thinkyhead/fix_extruder_offset ... Fix EXTRUDER_OFFSET compiler error	2015-03-31 03:21:45 -07:00
Scott Lahteine	cda4bd4ad9	Correct the comment about M206	2015-03-31 03:20:15 -07:00
Scott Lahteine	935592cf6a	offsets off by default	2015-03-31 02:50:52 -07:00
Scott Lahteine	2a45922afe	Restore extruder_offset, init more simply	2015-03-31 02:49:47 -07:00
Scott Lahteine	28792e5731	Fix typo in assignment	2015-03-31 02:10:49 -07:00
Scott Lahteine	bb6174524f	Fix EXTRUDER_OFFSET compiler error ... - Addressing issue #1741	2015-03-31 02:08:57 -07:00
Scott Lahteine	571652c49b	Fix LCD click ... - Make the default LCD click sound more pleasant - Fix warnings about bed temperature runaway	2015-03-31 01:41:24 -07:00
Chris Roadfeldt	45ece5afb1	Merge remote-tracking branch 'MarlinFirmware/Development' into Development	2015-03-31 03:07:57 -05:00
Chris Roadfeldt	17707e7479	Fixed Z_PROBE_PIN pullup bug. ... Documented some additional areas that should be addressed if Z_PROBE is fully separated from Z_MIN or Z_MAX. Fixed a documentation error in sanity checks. Servos start at 0 not 1.	2015-03-31 02:56:41 -05:00
Scott Lahteine	21ab44cfa7	Merge pull request #1750 from thinkyhead/fixup_config ... Bring all configs up to date	2015-03-30 23:49:04 -07:00
Scott Lahteine	50145266cd	Merge pull request #1748 from thinkyhead/raise_before_homing ... Apply Z_RAISE_BEFORE_HOMING before homing XY	2015-03-30 23:37:41 -07:00
Scott Lahteine	a117b6bff6	Merge pull request #1747 from thinkyhead/progress_bar_tweak ... Fix up LCD_PROGRESS_BAR	2015-03-30 23:37:28 -07:00
Scott Lahteine	3348b3bf0c	Allow SD_FINISHED_RELEASECOMMAND to be undefined	2015-03-30 23:31:48 -07:00
Scott Lahteine	82794fa5f7	Add delta generic not renaming	2015-03-30 23:25:04 -07:00
Scott Lahteine	ba2c7cb467	Update configs with all the latest	2015-03-30 23:24:33 -07:00
Chris Roadfeldt	ec1d9c0b8f	Use Z_PROBE_ENDSTOP_INVERTING when checking pin status.	2015-03-31 01:06:01 -05:00
Chris Roadfeldt	3175c70c79	Manually synching back up with MarlinFirmware/Development.	2015-03-31 00:11:11 -05:00
Chris Roadfeldt	faac2af4af	Merge remote-tracking branch 'origin/Development' into Development	2015-03-31 00:03:07 -05:00
Chris Roadfeldt	3be00cce6f	Merge remote-tracking branch 'MarlinFirmware/Development' into Development ... Conflicts: Marlin/Configuration.h	2015-03-30 23:59:01 -05:00
Chris Roadfeldt	e08f8eed05	Revert 06f767d..cba5692 ... This rolls back to commit 06f767d608.	2015-03-30 23:51:36 -05:00
Scott Lahteine	5e82ed4f30	Restore ENDSTOPPULLUPS in Configuration.h	2015-03-30 21:15:16 -07:00
Chris Roadfeldt	992b07ca57	Don't disable Z_RAISE_BEFORE_HOMING when Z_PROBE_AND_ENDSTOP is enabled.	2015-03-30 22:58:10 -05:00
Chris Roadfeldt	cba5692673	Merge remote-tracking branch 'MarlinFirmware/Development' into Development ... Conflicts: Marlin/Marlin_main.cpp Marlin/stepper.cpp	2015-03-30 22:33:05 -05:00
Scott Lahteine	8500c80b33	Apply Z_RAISE_BEFORE_HOMING before homing XY	2015-03-30 20:22:21 -07:00
Scott Lahteine	92b54aa27e	#define HAS_POWER_SWITCH	2015-03-30 19:44:53 -07:00
Scott Lahteine	5519882eea	Fix up LCD_PROGRESS_BAR ... - Some messages should not expire with `PROGRESS_MSG_EXPIRE`. - Simplify conditional for progress bar with sanity checks. - Rename `messageTick` to `expireStatusMillis` and make it the expire time.	2015-03-30 18:00:54 -07:00
Scott Lahteine	6864280803	Use elif and parentheses in conditionals	2015-03-30 16:52:27 -07:00
Scott Lahteine	8c136a5ab5	Conditionals and comments for PS = 0	2015-03-30 16:50:05 -07:00
Scott Lahteine	2faed961ce	Allow POWER_SUPPLY 0 for no power switch	2015-03-30 16:39:47 -07:00
Scott Lahteine	baa6787393	Merge pull request #1740 from thinkyhead/fixup_homing ... Apply leveling for DELTA	2015-03-30 15:45:33 -07:00
AnHardt	9ac7dc675e	Make filament display on dogm_... same as hitachi... ... Thanks @MagoKimbra.	2015-03-30 16:56:21 +02:00
AnHardt	50a732360a	Replace extrudemultiply by extruder_multiply[active_extruder] ... Fix for #1460. Seems to work with only one extruder. Can't test this myself with more.	2015-03-30 13:35:03 +02:00
Scott Lahteine	e63076504d	Merge pull request #1733 from AnHardt/c20 ... Get back folder symbols on Hitachi displays	2015-03-30 01:57:00 -07:00
Scott Lahteine	41d258697a	Pass the z for after probing to retract_z_probe ... A `z_before` value is passed to probe_pt, but the `retract_z_probe` function assumes that Z is 0, doesn’t add `current_position[Z_AXIS]` as other cases do. This may be superfluous, so this is a test, and will be reverted if it has no effect.	2015-03-30 00:45:02 -07:00
croadfeldt	06f767d608	Merge remote-tracking branch 'upstream/development' into development	2015-03-30 02:10:49 -05:00
Scott Lahteine	b47fa8c064	Merge pull request #1735 from AnHardt/compilerCandy ... Remove some further warnings	2015-03-29 23:55:19 -07:00
Scott Lahteine	e96db1cd6c	Make G29 shared function inline	2015-03-29 23:21:39 -07:00
Scott Lahteine	d73b169de3	Apply leveling for DELTA, ... - Fix `prepare_move` function not calling `adjust_delta` - Add more shorthand for plan_buffer_line. - Fix wrong `federate` usage, assuming they are all mm/m - Minor `stepper.cpp` cleanup	2015-03-29 23:16:12 -07:00
Scott Lahteine	85b67e5223	Merge pull request #1738 from thinkyhead/fixup_homing ... Fix G29 E and M48 n	2015-03-29 20:08:19 -07:00
Scott Lahteine	ce44bee28b	Small code reduction	2015-03-29 19:45:14 -07:00
Scott Lahteine	0213f7f016	Cleanup case for M666	2015-03-29 19:39:43 -07:00
Scott Lahteine	803425e12c	Fix G29 E and M48 n ... - Users prefer `G29 E` to work like `M48 E` so fixed that - `M48 n` replaced with `M48 P` (or `p`). `n` legacy support - Shorten some strings to save precious bytes - Smaller code for 3-point probing	2015-03-29 18:56:09 -07:00
Scott Lahteine	1e9999711c	Merge pull request #1736 from thinkyhead/fixup_homing ... Fix G28 homing Y with X	2015-03-29 18:27:17 -07:00
Scott Lahteine	d738b7acdd	Merge pull request #1724 from Natealus/Development ... Viki 2 Pins from Manual and Azteeg X3 Pro Endstop Reswap	2015-03-29 18:26:32 -07:00
Scott Lahteine	e8ae51bfe3	Fix G28 homing Y with X ... - Fixed a typo causing G28 to home incorrectly - Added documentation to G28 - Added homeXYZ bools to neaten the code - Added a note about home_offsets being questionable	2015-03-29 18:06:59 -07:00
AnHardt	7b2550a604	Times can't be negative. ... cardreader.cpp needs temperature.h for autotempShutdown() when AUTOTEMP is defined but warns about unused variables. Unpublished variables by putting them in to temperature.cpp.	2015-03-30 01:58:46 +02:00
AnHardt	507efa771b	Remove unused variable fan_rot ... and satisfy the compiler about the implicit compare.	2015-03-30 01:46:38 +02:00
AnHardt	2b959a7752	Some additional {} to make the compiler happy.	2015-03-30 01:42:35 +02:00
AnHardt	0f1bd6e4a7	In ST7920_SWSPI_SND_8BIT(uint8_t val) parameter is unsigned ... therefor in macro ST7920_WRITE_BYTE(a) cast a to uint8_t to make the compiler happy.	2015-03-30 01:40:58 +02:00
AnHardt	81bab8739d	Get back folder symbols on Hitachi displays ... and make use of column 20.	2015-03-29 17:29:48 +02:00
Chris Roadfeldt	a9802c95b3	Ensure Z_PROBE_PIN is defined if Z_PROBE_AND_ENDSTOP is.	2015-03-29 04:18:37 -05:00
Chris Roadfeldt	62834a1c43	Don't deploy probe on Z Axis homing if Z_PROBE_AND_ENDSTOP is enabled, ... unless Z_SAFE_HOMING is.	2015-03-29 03:55:41 -05:00
Chris Roadfeldt	666fad3494	Typo fixed in sanity check.	2015-03-29 03:25:03 -05:00
Chris Roadfeldt	08a7aa16c5	Don't deploy Z Probe on Z homing if Z_PROBE_AND_ENDSTOP is defined.	2015-03-29 03:21:48 -05:00
Chris Roadfeldt	80285251cc	More config cleanup work for Z_PROBE_AND_ENDSTOP.	2015-03-29 03:06:20 -05:00
Chris Roadfeldt	fe4549cd83	Config file Z_PROBE_AND_ENDSTOP description clean up.	2015-03-29 03:04:59 -05:00
Chris Roadfeldt	82d2f11129	More additional sanity checks for Z_PROBE_AND_ENDSTOP	2015-03-29 02:53:55 -05:00
Chris Roadfeldt	05134f0807	Additional Sanity Checks for Z_PROBE_AND_ENDSTOP	2015-03-29 02:51:51 -05:00
Chris Roadfeldt	c75a5e8c55	Fixed typo for Z_PROBE_AND_ENDSTOP support in pins_RAMPS.h. ... Confirmed Sanity checks are working.....	2015-03-29 02:38:08 -05:00
Chris Roadfeldt	a98ac4033b	Added Z_PROBE_PIN to #define for Z_PROBE_AND_ENDSTOP support.	2015-03-29 02:36:26 -05:00
Chris Roadfeldt	6125124d6c	Config file cleanup for Z_PROBE_AND_ENDSTOP support.	2015-03-29 02:29:16 -05:00
Chris Roadfeldt	324c14943b	Bug fixes for Z_PROBE_AND_ENDSTOP. ... Code cleanup for Z_PROBE_AND_ENDSTOP. Added Z_PROBE_PIN to pins_RAMPS_13.h	2015-03-29 02:16:09 -05:00
Natealus	ca5821aa57	Made #ifdef DELTA branch instead ... Another fellow here gave me the idea to do it this way	2015-03-29 01:08:00 -06:00
Natealus	04fda6b3e9	Undesired behavior with endstops swapped ... Made my swap commented out so its the option not the default.	2015-03-29 00:55:47 -06:00
Natealus	ca1477d830	Revert "Undesired behavior with endstops swapped" ... This reverts commit 15028e9b08.	2015-03-29 00:52:53 -06:00
Natealus	15028e9b08	Undesired behavior with endstops swapped ... I made my changes to swap MIN and MAX endstops on the Azteeg X3 Pro the option rather than the default to fix unexpected reversal.	2015-03-29 00:42:40 -06:00
Nate Stokes	18245c6cd2	Update pins_RAMBO.h ... Updated for the changes that Thinkyhead made before I submitted mine.	2015-03-28 22:29:54 -06:00
Natealus	234a9d0b12	Viki 2 Pins from Manual ... I added in the pins into the new board files for the Azteeg X3, X3 Pro, Printrboard, and Rambo. I'm sure it can be added for others too but these are the manual specified pins. Just like many things here though, I can't test for the boards other than the Azteeg X3 Pro. Hopefully it works smoothly for everyone who happens on this nifty display. :)	2015-03-28 22:11:12 -06:00
Scott Lahteine	a22efc5f11	Merge pull request #1597 from Wurstnase/g29_auto_script ... G29 auto script	2015-03-28 20:54:17 -07:00
Scott Lahteine	62a3da9618	Merge pull request #1723 from thinkyhead/tweak_g92 ... Tweak G92	2015-03-28 20:53:37 -07:00
Scott Lahteine	afff968e88	ARRAY_BY_EXTRUDERS, shorthand to sync planner ... - Add some documentation to planner and stepper headers - Patch up RAMBO pins with undefs - Add `sync_plan_position` inline to set current XYZE - Swap indices in `extruder_offset` to fix initialization values	2015-03-28 20:33:21 -07:00
Scott Lahteine	2b0c25a091	Tweak G92 to call plan_set_position only once, yes?	2015-03-28 19:18:24 -07:00
Natealus	22bea37393	Azteeg X3 Pro Pin Revisions ... I added the fan pins in here and left them at -1 in configuration_adv.h and it works fine. Pinned for a 4 extruder from 1-4 and HE5 being the controller fan, HE6 being the Extruder Auto Fan/Water pump in the Kraken case, and HE7 being for part cooling fan. Added in descriptions for the MIN MAX pin swap and for servo motor additions.	2015-03-28 20:14:42 -06:00
Scott Lahteine	93dc0d0518	Merge pull request #1718 from AnHardt/blink ... Move variable blink from ultralcd.h to dogm_lcd_implementation.h	2015-03-28 16:20:33 -07:00
Scott Lahteine	edb67ea165	Patch generic delta config ... - Addressing issue mentioned at #1699	2015-03-28 14:13:25 -07:00
AnHardt	c481c3b180	Move variable blink from ultralcd.h to dogm_lcd_implementation.h ... to avoid warnings about unused blink. Concentrate definitions of variables in dogm_lcd_implementation.h to one place. Make only local used variable currentfont static.	2015-03-28 13:14:38 +01:00
Chris Roadfeldt	059052889f	Further Sanity Checks for Z_PROBE_AND_ENDSTOP.	2015-03-28 06:08:04 -05:00
Chris Roadfeldt	8b81f20c61	Filling in more places where Z_PROBE_PIN and Z_PROBE_AND_ENDSTOP need to ... be. Added Sanity Check for it. Added hook so it's enabled.	2015-03-28 05:55:42 -05:00
Chris Roadfeldt	fd823449ad	Added serial message for Z Probe trigger.	2015-03-28 05:42:38 -05:00
Chris Roadfeldt	92eb8109ab	Fix declaration of old_z_probe_endstop.	2015-03-28 05:09:48 -05:00
Chris Roadfeldt	44b88b41a2	Added credit for code.	2015-03-28 05:01:04 -05:00
Chris Roadfeldt	2979b40a7a	Fixed typo in Z Probe and Endstop section.	2015-03-28 04:41:03 -05:00
Chris Roadfeldt	9f3ff14008	Enabled separate Z Probe and Z Axis endstop use at same time. ... Typo fixes in comments in existing code.	2015-03-28 04:31:51 -05:00
Scott Lahteine	b14be7235e	Merge pull request #1585 from galexander1/strtod_e_fix ... Fix `code_value` (so `G1X1E2` isn't evaluated as `G1 X100 E2`)	2015-03-27 20:49:03 -07:00
Scott Lahteine	ba871e46bf	Fix compiler warnings ... - Patched up for most included configurations	2015-03-27 20:29:05 -07:00
Scott Lahteine	ffe0df4b36	Latest upstream commits	2015-03-27 18:30:56 -07:00
Scott Lahteine	bc2f249cc6	Merge pull request #1622 from AnHardt/tm-utf-minus-kanji ... The big Language Pack	2015-03-27 18:24:19 -07:00
Scott Lahteine	abfcbd793f	Merge pull request #1693 from chris-bo/rework_lcd_beeper ... use only one implementation for beeper feedback	2015-03-27 17:03:38 -07:00
Scott Lahteine	55739a4efe	Fix Z_APPLY_STEP	2015-03-27 17:02:11 -07:00
Scott Lahteine	df02b992b0	Fix redundant_temperatrure_raw setting	2015-03-27 16:37:22 -07:00
Scott Lahteine	fe29bdd72b	Also fix temperature externs	2015-03-27 16:26:07 -07:00
Scott Lahteine	578f93bc26	Fixup temp arrays and leveling equation, prepare for merge	2015-03-27 16:20:23 -07:00
Scott Lahteine	7d472367e2	Merge pull request #1713 from epatel/Development ... Parentheses need here otherwise sanitycheck.h does wrong thing on line 222	2015-03-27 16:14:55 -07:00
Scott Lahteine	ce485175eb	Give all temp arrays 4 indices	2015-03-27 16:11:28 -07:00
Edward Patel	782464ea4d	Parentheses need here otherwise sanitycheck.h does wrong thing on line 222	2015-03-27 20:22:59 +01:00
Scott Lahteine	460f73056b	Fix ECHOPAIR ambiguity ... - Also patch up some warnings	2015-03-27 00:46:39 -07:00
Scott Lahteine	19d418cd6a	Fix up the code to eliminate warnings	2015-03-27 00:32:58 -07:00
Scott Lahteine	b2496533c6	Put " M" into pmem	2015-03-26 20:30:14 -07:00
Scott Lahteine	267d6bef15	Eliminate most warnings ... - Fix a bug reading `code_value` for `M503 Sn` - Hide and remove unused variables	2015-03-26 20:07:17 -07:00
Scott Lahteine	3fd7790a15	Merge branch 'Development' into fixup_leveling ... Latest upstream commits	2015-03-26 19:56:58 -07:00
Scott Lahteine	b76a352d41	Fix the planeNormal calculation	2015-03-26 17:14:07 -07:00
Scott Lahteine	410f64782a	Always 4 temp sensors	2015-03-26 16:22:21 -07:00
Scott Lahteine	0b32431551	Remove abs() from planeNormal.z	2015-03-26 16:20:23 -07:00
Scott Lahteine	53169d96e8	Set temp_meas_ready in set_current_temp_raw	2015-03-26 16:02:15 -07:00
Scott Lahteine	06eb7f5b3c	Latest upstream commits	2015-03-26 15:30:51 -07:00
Scott Lahteine	04328d7537	Add zprobe_zoffset in set_bed_level_equation_* ... - Also a small tweak to SanityCheck.h	2015-03-26 15:29:16 -07:00
Scott Lahteine	d2e73545ba	Merge pull request #1705 from AnHardt/ddt ... Avoid warnings in SanitiCheck.h	2015-03-26 15:16:37 -07:00
Scott Lahteine	78090275a9	Fix probe range editing ... - Increase the probe offset range to -20…20 - Apply the range limits to the menu item	2015-03-26 13:52:48 -07:00
AnHardt	1ff6df8f9e	Avoid warnings in SanitiCheck.h ... /SanityCheck.h:107:53: warning: missing terminating ' character ...	2015-03-26 21:30:53 +01:00
AnHardt	ebe5b87c2c	< like in the oher compareble loops ... to avoid: Marlin_main.cpp:1790: warning: array subscript is above array bounds.	2015-03-26 21:18:19 +01:00
AnHardt	20f909567a	Merge https://github.com/MarlinFirmware/Marlin into tm-utf-minus-kanji ... Conflicts: README.md Solved	2015-03-26 10:05:00 +01:00
Christian Bohn	eab5fad539	code formatting	2015-03-26 09:00:34 +01:00
Scott Lahteine	abadeac08d	Group zprobe_zoffset with bed leveling	2015-03-25 23:06:33 -07:00
Scott Lahteine	9e8427f253	Merge pull request #1698 from zeuseye/Development ... Clean "fromsd" array if not SDSUPPORT	2015-03-25 22:21:57 -07:00
Scott Lahteine	32331faee4	Prettify Bed Level Correction Matrix ... - Put + in front of positive values in the output	2015-03-25 22:13:59 -07:00
Scott Lahteine	f5f4c2b366	Merge branch 'Development' into fixup_leveling ... Latest upstream commits	2015-03-25 21:30:49 -07:00
Scott Lahteine	7667023817	Merge pull request #1694 from Wurstnase/fix_z_config ... comment #define Z_DUAL_STEPPER_DRIVERS	2015-03-25 21:28:17 -07:00
Scott Lahteine	5eff15c409	Merge branch 'Development' into fixup_leveling ... Latest upstream commits	2015-03-25 21:24:38 -07:00
Scott Lahteine	ad05a726c1	Merge pull request #1691 from AnHardt/PID_dt ... Move definition of PIDdT back to temperature.h	2015-03-25 21:22:39 -07:00
Scott Lahteine	5261d35737	Fix custom m-code behavior ... Don’t set CUSTOM_M_CODE_SET_Z_PROBE_OFFSET if there’s no Z probe	2015-03-25 21:20:50 -07:00
Scott Lahteine	fbf9b21e0c	Merge plus fixup zprobe_zoffset ... - Make `zprobe_zoffset` conditional - Fix ConfigurationStore for `zprobe_zoffset`	2015-03-25 21:14:00 -07:00
Scott Lahteine	96b5da7198	Fix up bed leveling code ... - Init `zprobe_zoffset` - Remove `current_position[Z_AXIS] = zprobe_zoffset` lines from the `set_bed_level_equation_*` functions - Apply standards to `mesh_bed_leveling` files - Document `MESH_BED_LEVELING`	2015-03-25 20:36:24 -07:00
Scott Lahteine	02b4f5f9cd	Merge pull request #1689 from AnHardt/MAXand161 ... Fix MAX6675 again and introduce set_current_temp_raw()	2015-03-25 20:23:51 -07:00
AnHardt	f680e509c4	Enclosed error-messages for TEMP_SENSOR_1_AS_REDUNDANT in PSTR()	2015-03-25 23:26:06 +01:00
Victor Torre	d43d47da14	Clean "fromsd" array is not SDSUPPORT ... if not have SDSUPPORT the fromsd array is not necessary	2015-03-25 22:05:18 +01:00
AnHardt	ac81b4084f	Make variables and function static.	2015-03-25 21:37:15 +01:00
alexborro	55025558dc	Implement Dry-Run mode in G29 ... It just probe all the bed without appliying the matrix. Useful after a first G29 to check the topology.	2015-03-25 11:12:30 -03:00
wurstnase	a4ad9117dd	comment #define Z_DUAL_STEPPER_DRIVERS	2015-03-25 13:46:29 +01:00
chris-bo	2dfd0e5ce7	Update Configuration.h ... documentation how to disable buzzer feedback	2015-03-25 12:44:29 +01:00
Christian Bohn	4c3cbc0961	use only one implementation for beeper feedback	2015-03-25 12:23:50 +01:00
AnHardt	01cc97a3c3	Corected condition for PIDdT	2015-03-25 12:08:23 +01:00
AnHardt	94330705c7	Move definition of PIDdT back to temperature.h ... make it unconditional remove all definitions in the 'Configuration.h's remove form 'Conditionals.h'	2015-03-25 11:51:41 +01:00
AnHardt	dd0067afa6	Fix MAX6675 again and introduce set_current_temp_raw() ... to make the temperature-code work again with Arduino 1.0.6. Sorry could not make an extra block on base level.	2015-03-25 11:08:24 +01:00
AnHardt	8848b7e9ef	Add the missed {} to END_MENU in ultralcd.cpp ... what caused an extra update of encoderLine most of the time.	2015-03-25 09:48:21 +01:00
AnHardt	4beffbca69	Make SMALL_INFOFONT configurable. ... Tweak the documentation	2015-03-24 23:40:04 +01:00
CONSULitAS	045ea42cc8	Merge remote-tracking branch 'upstream/Development' into Development	2015-03-24 22:52:02 +01:00
alexborro	c2ba5d0c09	Fix ZigZag and Topograph table ... ZigZag: Inverted Behavior.. If T supplied, it does not zigzag. Topograph table: The table was rotated 90º clockwise.	2015-03-24 15:50:31 -03:00
alexborro	0ce3576685	New Feature: Z_DUAL_ENDSTOPS ... Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z steppers - Let's call them Z stepper and Z2 stepper. That way the machine is capable to align the bed during home, since both Z steppers are homed. There is also an implementation of M666 (software endstops adjustment) to this feature. After Z homing, this adjustment is applied to just one of the steppers in order to align the bed. One just need to home the Z axis and measure the distance difference between both Z axis and apply the math: Z adjust = Z - Z2. If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it is.. think about it) and the Z adjust would be positive. Play a little bit with small adjustments (0.5mm) and check the behaviour. The M119 (endstops report) will start reporting the Z2 Endstop as well.	2015-03-24 14:06:44 -03:00
AnHardt	c686069ccd	Revert "Remove 6x9 font" ... This reverts commit e6cb8ee188. Conflicts: Marlin/dogm_lcd_implementation.h Confilkt solved Needs rework.	2015-03-24 17:13:05 +01:00
AnHardt	b00a531df8	Revert "Removed now unneded FONT_STATUSMENU" ... This reverts commit 8c5bb38748.	2015-03-24 17:01:56 +01:00
AnHardt	9d589cbb2a	Merge https://github.com/MarlinFirmware/Marlin into tm3-utf-minus-kanji ... Conflicts: Marlin/example_configurations/delta/generic/Configuration.h Marlin/example_configurations/delta/kossel_mini/Configuration.h Marlin/language.h Conflicts solved	2015-03-24 16:59:15 +01:00
Scott Lahteine	8db4fd7177	Merge branch 'Development' into planner_oh_planner ... Latest upstream commits	2015-03-23 22:08:50 -07:00
Scott Lahteine	0d81abe1c9	Merge branch 'Development' into config_testing ... Latest upstream commits	2015-03-23 21:13:04 -07:00
Scott Lahteine	01740fd9c6	Merge branch 'Development' into planner_oh_planner ... Latest upstream commits	2015-03-23 21:12:36 -07:00
Scott Lahteine	fc53e43de6	Don't test raw temp for MAX6675 ... - Remove test of raw temp for thermistor 0 when using MAX6675 - Longer `raw_temp_value` array for `TEMP_SENSOR_1_AS_REDUNDANT`	2015-03-23 20:55:48 -07:00
Scott Lahteine	03fa9fae9f	Merge branch 'Development' into fix_temperature_minmax ... Latest upstream commits	2015-03-23 20:42:48 -07:00
Scott Lahteine	1fac388664	Revert measurement loop	2015-03-23 15:18:22 -07:00
CONSULitAS	703f3b38c4	Merge remote-tracking branch 'upstream/Development' into Development	2015-03-23 17:40:49 +01:00
nicolas-rambaud	37cde8a191	Report changes from previous PR from old code base including : ... I've updated the minimum values from the LCD. It has been a while that i want to at least fix this. I have an inductive probe and often i need to set my zOffset to something lower than 0.5. With the current implementation, the default LCD value is set to 0.5 for some reason. On my case i need to be able to set it down to 0.0 as my inductive probe can be lower than 0.5. Before with the LCD we couldn't change this value below 0.5. We had to flash the firmware every time which was painful. Now we are able to change this value down to 0.0 if needed. I've also changed the minimum value for Z min acceleration. In the default configuration it's set to 25 but on the LCD the minimum was 100 which is not coherent. I've changes the minimum to 10. On this axis, depending on the mechanics/motor drivers we might require very low acceleration, so i guess 10 is somehow realistic.	2015-03-23 12:29:12 +01:00
Scott Lahteine	b26a3ea02c	Merge pull request #1662 from josla972/refactor_scara ... Refactor SCARA calibration. Save some lines of code and possibly ROM.	2015-03-23 00:51:18 -07:00
wurstnase	e6f6c6e3a1	fix bad insertion config again	2015-03-23 08:32:48 +01:00
Scott Lahteine	6bdee87be3	Cleanup temperature code ... - Get rid of unused temp states in the ISR, resulting in more frequent temperature reading with fewer sensors - Shrink code slightly in min/max testing	2015-03-23 00:27:29 -07:00
Scott Lahteine	34a41648ab	Merge branch 'Development' into planner_oh_planner ... Latest upstream commits	2015-03-22 23:40:29 -07:00
Scott Lahteine	4fbb80567e	Get upstream commits	2015-03-22 23:07:22 -07:00
Scott Lahteine	7717e1ce33	Fix bad insert in configuration	2015-03-22 21:48:46 -07:00
Scott Lahteine	146501215f	Fix mangled probe_pt calls ... - Address issue #1669 - Remove the TOPO_ORIGIN configuration setting	2015-03-22 21:45:20 -07:00
maverikou	15345cc249	Corrected Z_PROBE_ALLEN_KEY behaviour.	2015-03-22 13:54:51 +02:00
maverikou	0f034dd97e	Clean up Z_RAISE_AFTER_PROBING to work the same in all code paths except Z_PROBE_SLED.	2015-03-22 13:54:45 +02:00
maverikou	6c96f32069	Blind fix for #1507	2015-03-22 13:54:21 +02:00
Josef Larsson	379348487e	Removed malplaced comment.	2015-03-22 12:21:31 +01:00
Scott Lahteine	8bd6e37b21	Merge pull request #1661 from thinkyhead/G92_no_offset ... Don't add home offsets in G29	2015-03-21 16:49:06 -07:00
Scott Lahteine	582cd780cd	Fix compile error with *_DUAL_STEPPER_DRIVERS ... - Patch up macros in stepper.cpp	2015-03-21 16:43:47 -07:00
Josef Larsson	9b3462f73f	Refactor SCARA calibration. Save some lines of code and possibly ROM.	2015-03-22 00:37:24 +01:00
Scott Lahteine	691e753cc3	Don't add home offsets in G29 ... - Address #1262 by leaving values as set - Rename `add_homing` to `home_offset`	2015-03-21 16:30:02 -07:00
Scott Lahteine	88e81a4804	Latest upstream commits, plus fixes ... - Also add Manual Bed Leveling to the rest of the configs	2015-03-21 16:12:57 -07:00
Scott Lahteine	15eb5d35a2	Merge branch 'Development' into config_testing ... Latest upstream commits	2015-03-21 15:42:45 -07:00
Scott Lahteine	19df90622b	Include Conditionals.h file in update	2015-03-21 15:40:20 -07:00
Scott Lahteine	9b639b4135	Merge pull request #1619 from epatel/manual-bed-leveling+mesh-bed-level ... Manual bed leveling + mesh bed leveling	2015-03-21 15:39:42 -07:00
Scott Lahteine	2c9bd15625	Move LCD items to Conditionals.h ... - `Conditionals.h` is included twice, setting LCD values the first time	2015-03-21 15:24:57 -07:00
Scott Lahteine	63abeaff38	Merge branch 'Development' into config_testing ... Latest upstream commits	2015-03-21 15:03:06 -07:00
Scott Lahteine	3703694e30	Fix temperature min/max test ... - Base tests on all thermistors/thermocouples, not just heater 0	2015-03-21 14:23:43 -07:00
Edward Patel	3d0a060a7a	Added G29 command	2015-03-21 14:50:47 +01:00
Edward Patel	c516747847	Merge branch 'Development' into manual-bed-leveling+mesh-bed-level	2015-03-21 14:49:52 +01:00
Scott Lahteine	af14c684b5	Minor optimizations to planner code ... - Prefetch values used more than once	2015-03-20 20:57:06 -07:00
Scott Lahteine	13fbf42d95	Cleanup of planner code ... - Use named axis indexes, `X_AXIS` etc. - Replace `block.steps_A` with block.steps[A]` - Replace `A_segment_time` with `segment_time[A]` - Add `A_AXIS`, `B_AXIS` for `COREXY` axes - Conditional compile based on `EXTRUDERS` - Add BLOCK_MOD macro for planner block indexes - Apply coding standards to `planner.h` and `planner.cpp` - Small optimizations of planner code - Update `stepper.cpp` for new `block` struct - Replace `memcpy` with loops, let the compiler unroll them - Make `movesplanned` into an inline function	2015-03-20 20:42:49 -07:00
AnHardt	64e3d33893	Fix shrinked menucode ... by updating 'encoderPosition' in END_MENU() line 1.	2015-03-20 23:36:14 +01:00
Edward Patel	a7e89d4cfa	Merge branch 'Development' into manual-bed-leveling+mesh-bed-level	2015-03-20 15:46:01 +01:00
AnHardt	8c5bb38748	Removed now unneded FONT_STATUSMENU	2015-03-20 14:12:12 +01:00
Scott Lahteine	2176a22d42	Fix count_direction initializer ... - Addressing #1625	2015-03-20 05:45:05 -07:00
AnHardt	e72cb3e45d	Merge https://github.com/MarlinFirmware/Marlin into tm2-utf-minus-kanji ... Conflicts: Marlin/dogm_lcd_implementation.h Marlin/ultralcd_implementation_hitachi_HD44780.h Fix merge conflicts 2	2015-03-20 13:35:47 +01:00
Scott Lahteine	cb6942d4a7	Merge branch 'Development' into config_testing ... Get upstream commits	2015-03-20 05:30:36 -07:00