bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
13,937 Commits 1 Branch 4 Tags
202840e750b4a94c71a6eafe30d52112825d882b
Commit Graph

1185 Commits

Author SHA1 Message Date
Scott Lahteine
51bf3c9503 Fix E direction for MK2_MULTIPLEXER with LIN_ADVANCE 2018-03-14 07:56:18 -05:00
Studiodyne
e7a61de8af [2.0] FWRetract Reset (Best way) (#10083) 2018-03-14 01:35:30 -05:00
Scott Lahteine
e7570f3195 Improve TMC config organization, naming 2018-03-14 00:18:41 -05:00
Scott Lahteine
07cf2cd9c4 Fix sensorless_homing_per_axis compile warning 2018-03-14 00:18:40 -05:00
Scott Lahteine
14c03cb6f4 [2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10069) 
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
 2018-03-13 01:15:22 -05:00
Scott Lahteine
468f34104b Patch do_blocking_move_to so 'destination' can be used 2018-03-12 08:16:17 -05:00
Scott Lahteine
28f1276286 [2.0.x] Add Z_AFTER_PROBING option (#10058) 
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
 2018-03-11 13:07:55 -05:00
Scott Lahteine
751785fc97 Followup to recent patches 
- `M666` is static, not inline
- Disambiguate some stepper macros
 2018-03-10 21:41:17 -06:00
Scott Lahteine
a0211f5d6c Disambiguate else in stepper_indirection.h 2018-03-10 19:56:22 -06:00
Scott Lahteine
f10c87b442 Update Endstops class for 1.1.x parity 2018-03-10 06:57:31 -06:00
Scott Lahteine
239902f861 Fix E2END and add EEPROM to Smart RAMPS 
Reference #9983
 2018-03-10 06:57:31 -06:00
Scott Lahteine
419d12ca1b Add UNKNOWN_Z_NO_RAISE option 
With this option enabled, Z won't ever be raised until after `G28` has been completed, and it won't raise if Z becomes unknown. This is good for machines whose beds fall when Z is powered off.
 2018-03-10 00:17:34 -06:00
Scott Lahteine
3b4c89e4b5 Move do_probe_raise closer to set_probe_deployed 
…and limit the raise to Z_MAX_POS
 2018-03-10 00:17:34 -06:00
Scott Lahteine
2908e76151 Fix position_is_reachable_by_probe typo, add comment 
Fix #10029
 2018-03-10 00:15:41 -06:00
Scott Lahteine
161ff9ff35 Fix UPDATE_ENDSTOP for CorePQ compatibility 
Fixes #9939
 2018-03-09 08:54:48 -06:00
Scott Lahteine
49ca67202f Patch configuration_store for extra serial port 
Fix #9948
 2018-03-09 07:42:27 -06:00
Scott Lahteine
16a8edc5f0 Add more delay before pulse off in Linear Advance ISR 
A capital idea from https://github.com/MarlinFirmware/Marlin/pull/9914#issuecomment-371614153
 2018-03-09 05:26:29 -06:00
Scott Lahteine
dfd5d2fe75 Have position_is_reachable_by_probe use the whole bed (#10020) 
Previously `position_is_reachable_by_probe` was limited to the area specified for `G29` mesh leveling (even if leveling was disabled). This change will properly consider the entire bed area so that `G30` and other non-leveling probing may take place.
 2018-03-09 03:37:30 -06:00
Scott Lahteine
3c2bfa5e53 Update powersupply_on in power_on/off (#10015) 
Fix #10004
 2018-03-08 18:56:47 -06:00
Scott Lahteine
8d32fd997f Wrap NORM_E_DIR/REV_E_DIR macros in do{}while(0) 2018-03-08 16:20:24 -06:00
Scott Lahteine
98d48fc731 Followup to HAL_timer_restrain 
Followup to #9985
 2018-03-07 22:18:37 -06:00
Chris Pepper
a1a88ebabc HAL function to ensure min stepper interrupt interval (#9985) 2018-03-07 17:53:25 -06:00
Scott Lahteine
9515e5aefb Fix LA_active_extruder (static) 2018-03-07 05:49:20 -06:00
Scott Lahteine
e5ec793f7e Wrap stepper indirection macros 2018-03-07 05:42:45 -06:00
Sebastianv650
5b85464791 Fix for LA (#9964) 
Missed in the original LA 1.5 PR: eISR has to use a local copy of
current_block->use_advance_lead because it might still run wenn the last
block has been set to NULL.
 2018-03-07 05:33:13 -06:00
Scott Lahteine
ffbf63e6af Add HAS_TEMP_SENSOR conditional 2018-03-07 01:53:50 -06:00
Scott Lahteine
2057177184 Make enums into implicit char 2018-03-06 23:39:56 -06:00
Scott Lahteine
ca0def766e LIN_ADVANCE single stepper optimization 2018-03-06 19:26:54 -06:00
Scott Lahteine
8291ae34f2 Support duplication mode in LIN_ADVANCE 2018-03-06 19:12:23 -06:00
Scott Lahteine
0dd1c4458d Put more code between pulse start and stop (#9959) 2018-03-05 23:06:57 -06:00
Scott Lahteine
36262a0479 Use static classes for job timers (#9938) 2018-03-04 21:23:43 -06:00
Scott Lahteine
930720bbbb Fix broken reverse planner (#9943) 
From #9914 by @Sebastianv650
 2018-03-04 21:19:06 -06:00
Bob-the-Kuhn
025118da3e Init print_job_timer in setup() instead of "early" (#9937) 2018-03-04 16:23:44 -06:00
Scott Lahteine
07ae23fe14 No pulse delay on last e_steps in advance isr 2018-03-04 15:06:31 -06:00
Scott Lahteine
ed758de80d tweak comment in stepper.cpp 2018-03-04 04:03:23 -06:00
Scott Lahteine
d1dc863962 autotemp_factor is not value_celsius_diff 
See https://github.com/MarlinFirmware/Marlin/issues/9852#issuecomment-369861822
 2018-03-03 23:27:54 -06:00
Thomas Moore
f3914a432e Clear retracted status when homing the Z axis 2018-03-03 23:18:40 -06:00
Scott Lahteine
6d7f4f84e2 Add board MKS_BASE_HEROIC (#9926) 
Followup to #9008

- Don't define micro-stepping pins for boards that lack them.
- Allow setting of 128 microsteps with `M350`.
 2018-03-03 23:14:52 -06:00
Scott Lahteine
649f375494 Fix: M112 calling kill from interrupt (#9923) 
Fix #9906
 2018-03-03 23:14:01 -06:00
Studiodyne
23a576faf7 [2.0] Fix for FW retract (#9878) 2018-03-01 15:15:40 -06:00
Scott Lahteine
91db7930dc Drop SCARA_FEEDRATE_SCALING 
The updated planner takes the length of the move, so this pre-calculation is no longer needed.
 2018-03-01 04:30:41 -06:00
Scott Lahteine
1746749361 Followup to #9868 2018-03-01 01:53:12 -06:00
Scott Lahteine
a446433c87 Fix SENSORLESS_HOMING for Core Kinematics (#9868) 2018-03-01 01:37:31 -06:00
Zachary Hill
c22f8dd660 Get duration_t in printcounter.h for its clients (#9843) 2018-02-28 04:15:29 -06:00
Scott Lahteine
966d9af98a Mesh export in Bilinear + UBL M503 2018-02-25 23:25:39 -06:00
Scott Lahteine
8d5a77001e EEPROM parity with 1.1.x 2018-02-25 23:03:09 -06:00
Sebastianv650
cb4cb86d80 Useless line removed (#9814) 
nextAdvanceISR is set in the next if structure in every possible
situation, so it's useless to set it once more before.
 2018-02-25 21:20:37 -06:00
Scott Lahteine
0557ab5780 Fix CONFIG_ECHO_START bug 
In reference to #9633
 2018-02-25 05:34:52 -06:00
UtterlyD
813f9f3082 [bugfix_2.0.x] - LIN_ADVANCE V1.5 stepper.cpp (#9797) 
Removal of obsolete (i) from port of LIN_ADVANCE from V1.1.x to V2..0.x.
 2018-02-24 16:37:23 -06:00
Scott Lahteine
3f89bbeab5 Drop a conditional only used once 2018-02-24 16:35:31 -06:00