Commit Graph

8005 Commits

Author SHA1 Message Date
Scott Lahteine
3633d4978b Merge pull request #4475 from esenapaj/Fix-for-PR-#4452
Fix for PR #4452 (Additional heater-state output changes)
2016-07-31 01:08:27 -07:00
Scott Lahteine
448e5252c3 Merge pull request #4474 from esenapaj/Update-distribution-date-and-readme
Update distribution date and readme
2016-07-31 01:07:43 -07:00
Thomas Otvald Jensen
fe059f1221 During homing, line_to_axis_pos will make a path which moves across the
endstop trigger point. The move is stopped at endstop, so current_position
should also be adjusted to reflect this!

Caused error in subsequent call in endstop adjustment, since the movement
would assume a wrong starting position.
2016-07-30 16:50:31 +02:00
esenapaj
bd73e6d3c8 Fix for PR #4452 (Additional heater-state output changes)
・Add missing ';'
2016-07-30 22:49:30 +09:00
esenapaj
cd5b03d88f Update distribution date and readme 2016-07-30 21:27:29 +09:00
Scott Lahteine
f575e92f2e Merge pull request #4473 from esenapaj/Follow-up-the-PR-#4408-etc
Follow-up the PR #4408 (Add support for reprapworld LCD), etc
2016-07-30 04:45:27 -07:00
Scott Lahteine
a406b176b0 Merge pull request #4472 from thinkyhead/rc_old_conditional
Make Conditionals.h a catch-all for old configs
2016-07-30 04:34:43 -07:00
esenapaj
657ef8aded Follow-up the PR #4408 (Add support for reprapworld LCD), etc
・Put #define REPRAPWORLD_GRAPHICAL_LCD into all the example
configuration files
・Adjust spacing
2016-07-30 20:32:57 +09:00
Scott Lahteine
83d341c394 Make Conditionals.h a catch-all for old configs 2016-07-30 04:25:30 -07:00
Scott Lahteine
de951c64f1 Make pins for EFF a consistent order 2016-07-30 04:17:21 -07:00
Scott Lahteine
49f75b7891 pins_RAMPS_14.h => pins_RAMPS.h 2016-07-30 04:17:21 -07:00
Scott Lahteine
d3b713cebc Set flags for RAMPS "type" in pins.h 2016-07-30 04:17:21 -07:00
Scott Lahteine
223b7e473f RAMPS assignment for derivatives 2016-07-30 04:17:21 -07:00
Scott Lahteine
3865843283 Consolidate setting of RAMPS High Voltage PWM outputs 2016-07-30 04:17:21 -07:00
Scott Lahteine
bdac2eb13a Don't set non-existent SLED_PIN 2016-07-30 04:17:21 -07:00
Scott Lahteine
bfbd01e29a Merge pull request #4470 from thinkyhead/rc_fix_manual_move
Followup to #4468
2016-07-30 04:17:05 -07:00
Scott Lahteine
802d873fc1 Merge pull request #4469 from esenapaj/Fix-for-PR-#4453
Fix for PR #4453 (Improved MANUAL_[XYZ]_HOME_POS)
2016-07-30 04:08:54 -07:00
Scott Lahteine
8e2f095dde Merge pull request #4456 from jbrazio/speaker-type3
Improvement to non-blocking speaker
2016-07-30 04:07:08 -07:00
Scott Lahteine
ad68b4cb8b Followup to #4468 2016-07-30 03:49:42 -07:00
esenapaj
b8c112c490 Fix for PR #4453 (Improved MANUAL_[XYZ]_HOME_POS) 2016-07-30 19:37:43 +09:00
Scott Lahteine
2f76138645 Merge pull request #4468 from thinkyhead/rc_fix_manual_move
Specify manual-movable E axes by extruder type
2016-07-30 03:21:43 -07:00
Scott Lahteine
696b63e300 Specify manual-movable E axes by extruder type 2016-07-30 00:36:48 -07:00
Scott Lahteine
46c33f1cfa Merge pull request #4467 from jbrazio/safe_delay-millis_t
Makes safe_delay() to be fully compatible with delay()
2016-07-29 20:23:44 -07:00
Scott Lahteine
9e21b2e51d Merge pull request #4455 from AnHardt/double-bump-feature
double bump probing as a feature
2016-07-29 20:00:10 -07:00
Scott Lahteine
db4d03bc81 Merge pull request #4452 from thinkyhead/rc_fix_heaterstates_part_2
Additional heater-state output changes
2016-07-29 19:58:00 -07:00
Scott Lahteine
c68ca95345 Merge pull request #4464 from thinkyhead/rc_fix_steps_per_mm_handling
Account for DELTA in Planner::refresh_positioning
2016-07-29 19:34:59 -07:00
João Brázio
226e74a438 Fixes safe_delay() to be fully compatible with delay() 2016-07-30 02:56:26 +01:00
João Brázio
8e79e8cdb3 Adds types.h 2016-07-30 02:55:52 +01:00
Scott Lahteine
844a4e799e Account for DELTA in Planner::refresh_positioning 2016-07-29 18:41:11 -07:00
AnHardt
7188ce0ad6 double bump probing as a feature
Why double touch probing is not a good thing.

It's widely believed we can get better __probing__ results when using a double touch when probing.

Let's compare to double touch __homing__.
Or better let's begin with single touch __homing__.
We home to find out out position, so our position is unknown.
To find the endstop we have to move into the direction of the endstop.
The maximum way we have to move is a bit longer than the axis length.
When we arrive at the endstop - when it triggers, the stepper pulses are stopped immediately.
It's a sudden stop. No smooth deacceleration is possible.
Depending on the speed and the moving mass we lose steps here.
Only if we approached slow enough (below jerk speed?) we will not lose steps.

Moving a complete axis length, that slow, takes for ever.
To speed up homing, we now make the first approach faster, get a guess about our position,
back up a bit and make a second slower approach to get a exact result without losing steps.

What we do in double touch probing is the same. But the difference here is:
a. we already know where we are
b. if the first approach is to fast we will lose steps here to.
But this time there is no second approach to set the position to 0. We are measuring only.
The lost steps are permanent until we home the next time.

So if you experienced permanently rising values in M48 you now know why. (Too fast, suddenly stopped, first approach)

What can we do to improve probing?
We can use the information about our current position.
We can make a really fast, but deaccelerated, move to a place we know it is a bit before the trigger point.
And then move the rest of the way really slow.
2016-07-30 03:00:49 +02:00
Scott Lahteine
c31f56a38c Deprecate EXTRUDER_WATTS and BED_WATTS 2016-07-29 17:34:14 -07:00
Scott Lahteine
e1970b4b28 Show power output in same order as temp output 2016-07-29 14:55:22 -07:00
Scott Lahteine
74df828acc Show ADC values inline rather than after 2016-07-29 14:55:18 -07:00
João Brázio
2b5faa61e2 Consolidates Buzzer and Speaker into a single object 2016-07-29 19:25:39 +01:00
João Brázio
8093c5f534 Non-blocking speaker now uses arduino's tone() 2016-07-29 18:45:50 +01:00
João Brázio
3367e79fec Merge pull request #4458 from jbrazio/followup-4448
Fixes a compilation error introduced by #4448
2016-07-29 18:44:30 +01:00
João Brázio
8896f08074 Fixes a compilation error introduced by #4448 2016-07-29 18:33:42 +01:00
Scott Lahteine
c677d2ac56 Merge pull request #4453 from thinkyhead/rc_better_manual_home
Improved MANUAL_[XYZ]_HOME_POS
2016-07-28 20:09:33 -07:00
Scott Lahteine
ea5ac94804 Improved MANUAL_[XYZ]_HOME_POS
No need for `MANUAL_HOME_POSITIONS`. Just set each one as-needed to
override the automatic behavior.
2016-07-28 19:51:48 -07:00
Scott Lahteine
1734de4d4e Merge pull request #4447 from thinkyhead/rc_fix_heaterstates
Fix output of heater states
2016-07-28 17:51:11 -07:00
Scott Lahteine
b40661cb18 Fix output of heater states 2016-07-28 17:40:01 -07:00
Scott Lahteine
9083e5420a Merge pull request #4419 from AnHardt/sd2pinmap
Switch Sd2CardLib to fastio
2016-07-28 17:38:46 -07:00
Scott Lahteine
6f59560526 Merge pull request #4448 from jbrazio/speaker-followup
A little cleanup at speaker.h
2016-07-28 17:37:36 -07:00
Scott Lahteine
5d8d18d03d Merge pull request #4451 from thinkyhead/rc_arduino_160_minimum
Prevent compiling with old Arduino sooner
2016-07-28 17:37:10 -07:00
Scott Lahteine
c94b6dd3e7 Revert to SanityCheck on every .cpp file 2016-07-28 17:17:50 -07:00
Scott Lahteine
256b03598d Merge pull request #4450 from thinkyhead/rc_fix_delta_optimization
Fix DELTA speed calculation
2016-07-28 16:50:04 -07:00
Scott Lahteine
753283e020 inverse_second => inverse_mm_s 2016-07-28 16:35:18 -07:00
Scott Lahteine
83e1d90ca3 Undo errant optimization of block->millimeters 2016-07-28 16:26:52 -07:00
João Brázio
909e98b1af A little cleanup at speaker.h 2016-07-29 00:03:25 +01:00
Scott Lahteine
ae1c7bca1b Merge pull request #4445 from thinkyhead/rc_fix_rdfgsc_mega3
Fix for R.D.F.G.S.C. with MEGATRONICS 3 board
2016-07-28 15:55:30 -07:00