Commit Graph

11730 Commits

Author SHA1 Message Date
Scott Lahteine
459f4fef60 Fix Temperature::init bug with HEATER_4_PIN 2019-01-11 22:54:26 -06:00
InsanityAutomation
a403d9a50c Improve menu pause / resume (#12876) 2019-01-11 20:42:11 -06:00
Alain Martel
432c21456f Add 3DFabXYZ Migbot example config (#12775)
Co-Authored-By: Alain Martel <alain74martel@gmail.com>
2019-01-11 20:41:20 -06:00
Scott Lahteine
fb8111553e getStatus => report_status 2019-01-11 19:51:00 -06:00
Chris Pepper
2919f3045d [LPC176x] Update PIO extrascript (#12878) 2019-01-11 19:45:33 -06:00
Scott Lahteine
19fea772e5 Use E_AXIS_N where it makes sense 2019-01-11 19:42:34 -06:00
Scott Lahteine
0d30ccf767 Tweaks to TMC26XStepper 2019-01-11 19:42:34 -06:00
HackingGulliver
1fd8e2c649 Fix: Junction Deviation calculates wrong cos(theta) on CoreXY (#12879) 2019-01-11 19:25:48 -06:00
Scott Lahteine
b402040059 Split bed size sanity check into two 2019-01-11 15:49:57 -06:00
Chris Barr
1d33784bf9 Add RUMBA32 Board (#12856) 2019-01-10 19:34:31 -06:00
Ondřej Nový
a0ef6198ff Level bed corners Z-hop height option (#12858) 2019-01-10 19:15:17 -06:00
Karl Andersson
8ae6f1e556 Fix errors and some compiler warnings with HAL_STM32 PlatformIO build (#12869) 2019-01-10 19:01:31 -06:00
Scott Lahteine
e6484d9dab Return to status when SD card is removed 2019-01-10 15:43:31 -06:00
Scott Lahteine
5f2d75f45b Move PINS_DEBUGGING to @section develop 2019-01-08 20:05:05 -06:00
Scott Lahteine
da42f27c9e Use maths macros for ceil/floor 2019-01-05 21:21:02 -06:00
Ludy
de4561c980 VORON Add LCD option BEEP_ON_FEEDRATE_CHANGE (#12822) 2019-01-05 14:12:05 -06:00
Adrian Cuzman
917cf3c7f0 Fix (broken) link to Install ReArm tutorial (#12823) 2019-01-05 14:04:34 -06:00
Giuliano Zaro
709a6356f7 Remove obsolete test conditions (#12829) 2019-01-05 14:02:45 -06:00
Luu Lac
bcf347403b Fix M106 extruder & fan count (#12820) 2019-01-05 14:01:35 -06:00
Kaushik Vemparala
ba7e35cbab Add LCD option BEEP_ON_FEEDRATE_CHANGE (#12774) 2019-01-04 19:30:08 -06:00
jmz52
d372e7e477 SDIO support for STM32F1 (#12782) 2019-01-04 13:38:07 -06:00
Marcio Teixeira
6a8fb0f25f Simplify backlash compensation code. (#12813)
- Use `TEST(dm,axis)` to determine directions instead of doing comparisons.
- Remove recomputation of `millimeters` and `delta_mm` since backlash compensation should not affect the distance over which material is extruded.
2019-01-04 13:30:56 -06:00
Scott Lahteine
a59d3d4323 Restore Flattr links to README 2019-01-03 17:07:29 -06:00
luxflow
7f244f9b9c Update LPC SD pins for BIQU SKR (#12767)
(Exactly matching the Azteeg X5 MINI Wifi)
2019-01-03 10:44:00 -06:00
jmz52
813a4ea107 Add support for Mks Robin TFT display (#12706)
* Add support for MKS Robin TFT display

- Add support for MKS Robin TFT display and encoder for MKS Robin board.
- Generic 128x64 UI with x2 upscale is used (for now).
- Tested on MKS Robin TFT V2.0 with ST7789V controller.
2019-01-03 10:38:39 -06:00
jmz52
c4237b529f Fix MKS Mini and SD card conflct over SPI mode (#12783) 2019-01-03 10:27:53 -06:00
Phr3d13
01f75591c6 Fix GTM32_PRO_VB Serial and HAL via watchdog (#12753)
Move `watchdog_reset` from `.h` to `.cpp` to eliminate the need to include `MarlinConfig.h` in a HAL-related file.
2019-01-03 09:46:49 -06:00
Scott Lahteine
288340cb6c Followup to VORON 2019-01-03 09:14:14 -06:00
Scott Lahteine
2aaa681dea Remove unused Cheaptronic pins 2019-01-03 08:58:55 -06:00
Marcio Teixeira
81e753064a Fix ExtUI compile warnings and error (#12799) 2019-01-03 08:36:43 -06:00
Ludy
74c47803f7 Add VORON printer (#12705) 2019-01-03 06:27:03 -06:00
kAdonis
637fb20c75 Allow 4 fan animation frames (#12772) 2019-01-03 06:03:06 -06:00
petieken
d9cf5e4883 Update pins_BIQU_SKR_V1.1.h (#12758) 2019-01-02 13:50:05 -06:00
TheLongAndOnly
cb643d87df Adding missing code for triple Z-stepper auto-align (#12786) 2019-01-01 18:22:04 -06:00
Ludy
14a7faf087 Fix compile warning comparison uint and int (#12788) 2019-01-01 18:20:12 -06:00
Marcio Teixeira
60cb36bef3 Misc. improvements (#12747)
* Make ExtUI respect MAXTEMP limits
  - Temperatures are now clamped by MAXTEMP limits rather than arbitrary values.
* Speed up USB init, add status
  - Speed up USB initialization
  - Show status message if init failed
* Enable status messages for EXTENSIBLE_UI
* Adjust max limit to MAX_TEMP - 15
* Misc. tweaks to formatting, const, etc.
2019-01-01 15:17:48 -06:00
InsanityAutomation
4f2473053c Fix M106 with SINGLENOZZLE 2018-12-31 20:10:18 -06:00
Reece Kibble
7557f8d68c Rename all Stm32f1 to STM32F1 (#12639) 2018-12-31 16:36:49 -06:00
Scott Lahteine
371d9a1acf Fix line-endings, formatting, whitespace
Followup to #12770
2018-12-30 15:38:20 -06:00
Ludy
135c74017c Fix compile DEBUG_EEPROM_READWRITE error (#12746) 2018-12-30 11:37:20 -06:00
Giuliano Zaro
54ba44ee37 Fix bad sanitycheck (#12748) 2018-12-30 10:44:15 -06:00
swilkens
b01a630bd0 [2.0.x] Correct Ender 3 bed size (#12769) 2018-12-30 10:42:47 -06:00
Alain Martel
44ed34475b Add MKS BASE 1.4 pins (#12770) 2018-12-30 10:40:22 -06:00
Roxy-3D
3a16cb6d7f
Slightly Slower Max X Axis speed
On some T-Rex 2+ machines the previous max step rate could lose steps....
2018-12-28 09:14:48 -06:00
Ludy
814d93c7cf Fix G33 sprintf output warning (#12738) 2018-12-27 18:05:42 -06:00
Ludy
3877bf9704 Fix compile error with delta and sensorless homing (#12740) 2018-12-27 17:51:22 -06:00
Ludy
cfc5e96b4b Move JD to Config.h (and fix jerk->eeprom bug) (#12720) 2018-12-27 15:29:39 -06:00
Roman Moravčík
594898aea7 Limit hotend / bed temperature to maxtemp-15 (#12713) 2018-12-27 11:46:05 -06:00
InsanityAutomation
530ef5846f Make nomove=false for toolchange on filament swap (#12739) 2018-12-27 11:38:35 -06:00
InsanityAutomation
14ddda285c Confirmation on Abort SD print (#12717) 2018-12-27 11:36:39 -06:00