bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
13,096 Commits 1 Branch 4 Tags 151 MiB
12e0581f24
Commit Graph

11139 Commits

Author SHA1 Message Date
Ludy
c0497234b9 SanityCheck Biqu SKR 1.1 => BigTree SKR 1.1 (#14526) 2019-07-06 21:24:10 -05:00
Roxy-3D
cdf4ed87a1
Add back required precision for off printer mesh saves 2019-07-06 21:01:56 -05:00
Scott Lahteine
8916acf083 [cron] Bump distribution date 2019-07-06 00:00:09 -05:00
Tanguy Pruvot
8873c583d3 Prevent extra settings.load on boot (#14499) 2019-07-05 22:25:59 -05:00
Bob Kuhn
dc02d0720d Pins Debugging for STM32 — NEEDS TESTING (#14309) 2019-07-05 22:08:06 -05:00
Tanguy Pruvot
052aa23efe STM32F1: ignore output check for analogWrite() (#14498) 2019-07-05 21:13:32 -05:00
Alexander Amelkin
7a42132002 GTM32 Pro pins updates (#14505) 2019-07-05 21:09:17 -05:00
thisiskeithb
10a71e332d Biqu SKR 1.1 => BigTree SKR 1.1 (#14514) 2019-07-05 20:57:08 -05:00
Vanessa Dannenberg
4fa8053638 RPW-Ultra thermistor table (#14517) 2019-07-05 20:37:05 -05:00
Ludy
a210f80adc Sanity-check for CASE_LIGHT_PIN (#14518) 2019-07-05 20:18:43 -05:00
Scott Lahteine
253d0f9671 Some MIN/MAX rely on core 2019-07-05 20:07:48 -05:00
Scott Lahteine
535b70057e Oops. Don't undef MIN/MAX 2019-07-05 18:42:21 -05:00
Scott Lahteine
021c4ccf5f Fix SpindleLaser class 
Fix #14465
 2019-07-05 18:39:40 -05:00
Scott Lahteine
fe02241044 NONE on combined options 2019-07-05 18:20:24 -05:00
Scott Lahteine
67e0238c89 Reduce type warnings 2019-07-05 18:20:24 -05:00
Scott Lahteine
750a16ad38 Fix MIN/MAX function collision with macros 2019-07-05 18:14:02 -05:00
Scott Lahteine
b6546ea33a Add include guards to some headers 2019-07-05 04:02:08 -05:00
Scott Lahteine
8ff49d6b46 [cron] Bump distribution date 2019-07-05 03:48:50 -05:00
Tanguy Pruvot
31450d9d6b M43: spi channels are not pins (#14502) 2019-07-05 02:03:01 -05:00
Roman Moravčík
9736a21de2 Update Slovak language (#14503) 2019-07-05 02:02:20 -05:00
Giuliano Zaro
2bf11da5ab Fix pin based on SOFT_SPI_CS (#14504) 2019-07-05 02:01:52 -05:00
Giuliano Zaro
66e16af29d SPI defines cleanup (#14506) 2019-07-05 01:59:37 -05:00
Tim Moore
eb6dec03bd Simplify power supply naming logic (#14488) 
Co-Authored-By: Tim Moore <tim.moore@lightbend.com>
Co-Authored-By: AnHardt <github@kitelab.de>
 2019-07-05 01:58:34 -05:00
Scott Lahteine
44e4f853c8 Patch M_PI in Marduino.h 2019-07-04 19:58:08 -05:00
Scott Lahteine
c6e6365e15 [cron] Bump distribution date 2019-07-04 15:56:02 -05:00
Roxy-3D
41b7f16ab8
Fix grammar of comment for G29 T command 2019-07-03 19:26:43 -05:00
Scott Lahteine
de462f2b8a Revert "Sort out settings.load with SD EEPROM emulation (#14458)" 
This reverts commit 108d0df565.
 2019-07-03 19:11:30 -05:00
Giuliano Zaro
b7573c6e69 Remove unused WRITE_VAR, etc. (#14493) 2019-07-03 17:52:30 -05:00
GMagician
8be146642f Unused SPI PIN definitions 2019-07-03 17:49:55 -05:00
Scott Lahteine
6a2a10a154 Bump distribution date 2019-07-03 03:11:12 -05:00
Scott Lahteine
371969b531 Remove deprecated SCARA option 2019-07-03 02:43:33 -05:00
Scott Lahteine
ae9232962e Use heater index defines 2019-07-02 23:29:43 -05:00
Scott Lahteine
f7eeae8424 Indent a line 2019-07-02 21:34:40 -05:00
teemuatlut
8aad29fb6e Fix Prusa chopper timing preset 2019-07-02 20:51:33 -05:00
Scott Lahteine
1620738701 Home dir use < or > 2019-07-02 20:51:33 -05:00
Scott Lahteine
0f79fb9821 Generic stop pins (presume one endstop per axis end) 2019-07-02 20:30:26 -05:00
Scott Lahteine
ce2b4bc20c Conditionals tweak 2019-07-02 20:30:26 -05:00
Ludy
3358caed14 Update German/Italian language (#14482) 2019-07-02 19:25:20 -05:00
Scott Lahteine
720bc7c00b
Named indices for Temperature class (#14479) 2019-07-02 08:39:55 -05:00
Scott Lahteine
274809aced Bump distribution date 2019-07-02 05:54:06 -05:00
Scott Lahteine
ff55088491 Fix Malyan LCD warnings 2019-07-02 04:36:02 -05:00
Scott Lahteine
d4415dcf59 Fix analogWrite ambiguity 2019-07-02 04:36:02 -05:00
thisiskeithb
c6f74ba887 TH3D EZBoard v1.0 (#14473) 2019-07-02 03:12:32 -05:00
Marcio Teixeira
16409eb233 Suppress more UNUSED warnings (#14466) 2019-07-01 20:42:38 -05:00
GMagician
82ecaa767e Remove unused code in M100 
queue.buffer is in bss area, start_free_memory starts from heap then above of bss
 2019-07-01 20:38:49 -05:00
GMagician
54358fbe28 Update Italian language 2019-07-01 20:37:59 -05:00
Scott Lahteine
c28e08c849 Fix mintemp/maxtemp monitoring for thermocouples 2019-07-01 10:24:53 -05:00
Scott Lahteine
de8fee6aea Clarify ExtUI command injection 2019-07-01 09:23:00 -05:00
Scott Lahteine
448d482d3c
Update motherboard numbering (#14460) 2019-07-01 09:10:55 -05:00
Tanguy Pruvot
108d0df565 Sort out settings.load with SD EEPROM emulation (#14458) 2019-07-01 09:10:17 -05:00
Scott Lahteine
18e396b102 Update motherboard numbering 2019-07-01 07:06:38 -05:00
Msq001
c9be936d4a BigTreeTech SKR Mini E3 (#14457) 2019-07-01 07:06:25 -05:00
Aliaksei Kvitsinski
2f932a11b3 Park heads with electromagnet (#14023) 2019-07-01 05:55:23 -05:00
Tanguy Pruvot
ca7f56e60b Add 0.025mm Manual Move for Z (#14456) 2019-07-01 03:17:50 -05:00
Scott Lahteine
56c4a96180 Bump distribution date 2019-07-01 01:21:31 -05:00
thisiskeithb
4b9f6d531b Add links to Junction Deviation heading (#14272) 2019-07-01 01:17:53 -05:00
Scott Lahteine
ced30b1054 Update ExtUI sanity checks 2019-07-01 00:50:22 -05:00
Scott Lahteine
10b85be405 status_message_level => alert_level 2019-07-01 00:47:08 -05:00
Tanguy Pruvot
24655a6bf3 Touch-MI Menu and Manual Deploy option (#14290) 2019-06-30 23:55:27 -05:00
Ludy
dab2f0c89c Mask unused var, update (c) comments (#14455) 2019-06-30 22:29:33 -05:00
Ludy
0ca64a0ea3 Fix compile error with Z_PROBE_END_SCRIPT (#14447) 2019-06-29 23:20:49 -05:00
Scott Lahteine
d16954dc88
Make KEEPALIVE_STATE a scoped auto-restore (#14446) 2019-06-29 22:49:50 -05:00
Tanguy Pruvot
19aafb9050 Fix STM32F1 motor shocks (stepper timer issue) (#14030) 2019-06-29 04:39:38 -05:00
Scott Lahteine
3ea073ace6 Slight reduction in serial.h file size 2019-06-29 04:04:25 -05:00
thisiskeithb
6978bb5ea5 Fix MKS Robin Nano FAN_PIN (#14444) 2019-06-29 02:11:26 -05:00
th33xitus
fe2c710b39 Fix for Arduino Due + 12864 Full Graphic Display (#14181) 2019-06-29 01:37:02 -05:00
Phr3d13
34c8204d25 STM32F1 SD EEPROM Emulation Fixes (#14261) 2019-06-29 01:34:54 -05:00
Marcio Teixeira
e6cf7860e8 Improve ExtUI, fix compiler errors, warnings (#14441) 2019-06-29 00:23:57 -05:00
Scott Lahteine
e89a47c8b5 Bump distribution date 2019-06-29 00:13:59 -05:00
Scott Lahteine
b615b492ba Update some HAL comments 2019-06-28 23:10:40 -05:00
Scott Lahteine
49027721e9 Clean up some pinsDebug headers 2019-06-28 22:50:56 -05:00
Scott Lahteine
c9a8db33c3 Fix scaledFanSpeed 2019-06-28 21:24:47 -05:00
Darsey Litzenberger
946f6bdeaa Disable leveling during G12 (#14385) 2019-06-28 19:23:42 -05:00
Scott Lahteine
b3f42d2519 Update SD host config comment 2019-06-28 19:13:27 -05:00
Roman Moravčík
77c67085bf Update Slovak language (#14433) 2019-06-28 18:57:43 -05:00
Giuliano Zaro
9174aa376f Update Italian language (#14440) 2019-06-28 18:56:10 -05:00
Giuliano Zaro
07c998afe5 Fix E2END on RURAMPS (#14438) 2019-06-28 18:55:17 -05:00
Giuliano Zaro
a9445d557e Remove extra #if (#14439) 2019-06-28 18:54:22 -05:00
Scott Lahteine
4d5a1984e2 Simplified fan handling code 2019-06-28 18:50:32 -05:00
Scott Lahteine
a8d68b7c8a Common method for scaled fan speed 2019-06-28 15:34:17 -05:00
Scott Lahteine
1a09c4dea5 Cutter class followup 2019-06-28 15:34:17 -05:00
Scott Lahteine
9da02d2114 Help syntax highlighting (Sublime, et. al.) 2019-06-28 15:04:17 -05:00
Martin
ae9afb333e Remove fwretract planner.synchronize calls (#14432) 2019-06-28 13:33:47 -05:00
Scott Lahteine
93cd66ac11 Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
Scott Lahteine
d7d80418ae
Singleton for cutting tools (#14429) 2019-06-27 23:06:49 -05:00
Scott Lahteine
2fde1475cb Allow SD card sharing on SKR Mini 2019-06-27 22:30:13 -05:00
Scott Lahteine
7e16835c83
Use LCD conditionals in pins files (#14428) 2019-06-27 22:14:43 -05:00
thisiskeithb
8b63e3701f MKS Robin Nano board support (#14363) 2019-06-27 21:33:41 -05:00
Tim Moore
81209f5310 'M105 R' to report redundant temp sensor (#14324) 2019-06-27 21:29:52 -05:00
Scott Lahteine
6664b90bbb
Init servo pins in HAL_init (#14425) 2019-06-27 16:29:17 -05:00
Tim Moore
8ce84fa44f Add temperature-based auto power options (#14397) 2019-06-27 16:28:07 -05:00
Scott Lahteine
00cc1079af Add missing chamber auto fan options 2019-06-27 16:05:47 -05:00
InsanityAutomation
ce656e2a26 Update G-code injection, sub-commands (#14418) 2019-06-27 15:07:45 -05:00
InsanityAutomation
b961251899 Add Z_PROBE_END_SCRIPT to UBL (#14419) 2019-06-27 13:00:55 -05:00
Scott Lahteine
2580104c8b Revert recent probe changes 
- Revert "Fix FIX_MOUNTED_PROBE compile error (#14393)"
- Revert "Fix G28 with non-BLTouch probes (#14381)"
- Revert "Fix BLTOUCH deploy/stow in HS mode (#14352)"
- Revert "Apply needed BLTouch patch (#14233)"

Co-Authored-By: AnHardt <github@kitelab.de>
 2019-06-26 05:33:43 -05:00
thisiskeithb
cd302f9464 Add MKS SGen-L Board (#14411) 2019-06-26 04:17:06 -05:00
Andy Shaw
064177154c Update SD card connection / sharing options (#14325) 2019-06-26 03:55:57 -05:00
BigIronGuru
9f136a7c67 Low-priority homing in G34 (#14391) 2019-06-26 03:52:01 -05:00
Scott Lahteine
49627069a5 Shorthand for home-after-deactivate 2019-06-26 03:47:55 -05:00
J.C. Nelson
30a3db4f22 Fix Malyan M200 config and protocol (#14394) 2019-06-26 03:35:52 -05:00
oechslein
8c55bd5451 Update "StallGuard threshold" heading (#14395) 2019-06-26 03:33:07 -05:00
Scott Lahteine
98f3a3d5c3 Bump distribution date 2019-06-26 03:15:31 -05:00
Msq001
e3846ec7a1 SKR mini can use 128x64 LCD (#14388) 2019-06-26 01:12:41 -05:00
Eric Ptak
8934b32f1b Fysetc AIO II / Cheetah STM32F1 (#14407) 2019-06-26 00:40:29 -05:00
Marcio Teixeira
8e23e9b16c Fix FIX_MOUNTED_PROBE compile error (#14393) 2019-06-25 04:55:29 -05:00
Tanguy Pruvot
07dac315a9 Up-to-date STM32F1 README (#14386) 2019-06-24 03:44:26 -05:00
thisiskeithb
a4aa3621c0 MKS Robin Mini Board Support (#14366) 2019-06-24 03:42:22 -05:00
Scott Lahteine
cf762d2c73 Fix enqueueing bug 2019-06-23 23:02:07 -05:00
BigIronGuru
12d21e642f Update G34 for non-BLTouch probes (#14380) 2019-06-23 20:55:43 -05:00
BigIronGuru
5986194c36 Fix G28 with non-BLTouch probes (#14381) 2019-06-23 20:53:05 -05:00
InsanityAutomation
aa0383a83b Enhance IDEX toolchange auto-return w/ no park, full control (#14117) 2019-06-23 20:00:48 -05:00
Scott Lahteine
3d9d72e8db Include order, spacing, etc. 2019-06-23 04:02:52 -05:00
mikeshub
1b1a4677f5 Fix LCD.h compilation error (#14377) 2019-06-22 21:08:30 -05:00
sjasonsmith
07b41a8c3f Include SOLENOID_PROBE in leveling report (#14344) 2019-06-22 17:54:37 -05:00
thisiskeithb
71b2700c3c Anycubic Trigorilla 1.4 Rev. 1.1 (#14357) 2019-06-22 17:53:45 -05:00
BigIronGuru
f5afaaef5b Fix probe.cpp warning (#14367) 2019-06-22 17:27:33 -05:00
BigIronGuru
def4bb987d Reset, stow BLTouch before mode change (#14368) 2019-06-22 17:26:02 -05:00
Scott Lahteine
78557076ff Add planner.synchronize to UBL G29 2019-06-22 17:23:29 -05:00
BigIronGuru
6578aa4e1b Apply minimum timing to BLTouch commands (#14369) 2019-06-22 17:20:19 -05:00
teemuatlut
2247bf1ba5 Add missing dedge init for TMC2209 (#14370) 2019-06-22 17:00:15 -05:00
mikeshub
1db7013e3b Fix and improve PID loops (#14373) 
- Windup guarding was missing. The kludge in place of windup guard is removed. D term filter calculations are simplified to require fewer `float` calculations. Sign change for D term output to make debugging output clearer.
- Use "no overshoot" for bed PID tuning.
 2019-06-22 16:52:56 -05:00
Scott Lahteine
17778d1c2a Fix M916-918 subcommands 2019-06-22 16:18:42 -05:00
Tanguy Pruvot
be69ec5b32 Fix PLR/M43 warnings (#14333) 2019-06-22 00:48:47 -05:00
BigIronGuru
9c83135d40 Only home Z at the end of G34 (#14353) 2019-06-22 00:43:33 -05:00
InsanityAutomation
5df051fdee Fix Start SD Print bug (#14354) 
Followup to the G-code parser injection update.
 2019-06-22 00:37:21 -05:00
LinFor
0f6f5132c1 Fix variable conflict in ok_to_send (#14351) 2019-06-21 19:04:30 -05:00
MrMabulous
c41b005f33 Add Extra Probing option, discarding outliers (#14338) 2019-06-21 19:02:26 -05:00
BigIronGuru
8f99d45045 Fix BLTOUCH deploy/stow in HS mode (#14352) 2019-06-21 18:55:27 -05:00
Tobias Frost
eeaef2410a Support DGUS Display with DWIN OS (#13253) 2019-06-21 04:47:23 -05:00
Scott Lahteine
bb0bcbaec0 Suppress compiler warning 2019-06-21 02:20:40 -05:00
Tanguy Pruvot
52383633e7 STM32F1: M43 PINS_DEBUGGING (#14072) 2019-06-21 01:20:17 -05:00
Karl Andersson
81d550754a Fix "UNUSED" redefined warning on HAL_STM32 (#14342) 2019-06-21 00:48:10 -05:00
Karl Andersson
4b365552db Fix Marduino SBI/CBI redefine (#14341) 2019-06-21 00:46:23 -05:00
InsanityAutomation
a9acd2f497 G34 configurable angle limit (#14321) 2019-06-20 21:18:36 -05:00
Scott Lahteine
a31cb910f5 Tweak some config spacing 2019-06-20 21:08:47 -05:00
Marcio Teixeira
49ea1c635a Fix missing dependencies (#14339) 2019-06-20 16:37:20 -05:00
Scott Lahteine
4df4c47994
Add TMC2209 support (#14249) 2019-06-20 15:47:50 -05:00
Tanguy Pruvot
ed0c70f0a0 SKRmini followup - Fysetc config updates (#14327) 2019-06-20 05:49:27 -05:00
Scott Lahteine
dd06017f64 Bring configs up to date 2019-06-19 01:03:51 -05:00
Scott Lahteine
9131b11944 Games in Info menu, if enabled 2019-06-19 00:03:32 -05:00
Scott Lahteine
4c872a01f2
G-code queue singleton, front injection (#14236) 2019-06-19 00:00:19 -05:00
Tanguy Pruvot
75aeb41ab7 SKRmini support for Fysetc Mini Panel (#14319) 2019-06-18 19:34:16 -05:00
InsanityAutomation
bf64dd4db6 Improve G34, M422 (Z alignment) (#14142) 2019-06-18 07:02:18 -05:00
Tanguy Pruvot
391250b04f STM32F1: Don't toggle EEPROM SPI SS (#14299) 2019-06-18 06:48:20 -05:00
Giuliano Zaro
27d30c1be8 Update Italian language (#14302) 2019-06-18 06:45:34 -05:00
Scott Lahteine
3f6424076b Update M524 description 2019-06-18 05:04:55 -05:00
Scott Lahteine
cf3631226b Document G-code M290 2019-06-18 04:53:31 -05:00
Scott Lahteine
c12b6ba760 Add Dagoma F5 to Makefile 2019-06-18 04:40:00 -05:00
3DSmitty
5b13abcacb Fix SPI_SD Outside of HAL_STM32F1 (#14306) 2019-06-18 02:38:18 -05:00
Bob Kuhn
089d12df16 Fix duplicate board IDs (#14310) 2019-06-18 02:26:13 -05:00
Ludy
2290b269dc Unused variable (#14301) 2019-06-18 00:15:41 -05:00
Scott Lahteine
6b2d42434c Wrap main menu external declarations 2019-06-17 21:44:56 -05:00
Scott Lahteine
aacb904e1f Adjust some config comments 2019-06-17 20:22:07 -05:00
Scott Lahteine
651f3eeed0 Clean up trailing whitespace 2019-06-17 20:22:07 -05:00
Ludy
35aabd1834 Fix Spindle/Laser compile error (#14312) 2019-06-17 18:38:43 -05:00
Scott Lahteine
21f377d94a
STM32F1: various small changes (#14313) 
- init the led pin as output (like other HALs)
- reduce sdio dma priority to normal.. highest is never the best...
- allow fsmc only on compatible STM32F1 (like HAL fsmc)
- fsmc: remove an useless C style cast
 2019-06-17 17:48:50 -05:00
sensei73
ce5f94c8f4 Fix Touch-MI sanity checks (#14316) 2019-06-17 17:46:14 -05:00
Tanguy Pruvot
287df7a61f STM32F1: various small changes 
- init the led pin as output (like other HALs)
- reduce sdio dma priority to normal.. highest is never the best...
- allow fsmc only on compatible STM32F1 (like HAL fsmc)
- fsmc: remove an useless C style cast
 2019-06-17 10:27:30 +02:00
3DSmitty
66d51272af Fix SPI, SD for BIGTREETECH SKR Mini (#14287) 2019-06-15 18:12:05 -05:00
Scott Lahteine
903863dcb6 Suppress some warnings 2019-06-15 17:47:59 -05:00
Scott Lahteine
eb1c9113c2 Try to init SD with no detect pin 2019-06-15 15:36:48 -05:00
Scott Lahteine
9a56a88200 Use OUT_WRITE in SPI pin init 2019-06-15 15:36:43 -05:00
Scott Lahteine
24c23b60fa Use lambda, fix wrap pointer 2019-06-15 15:36:42 -05:00
pinchies
3021097888 Add JGAurora A5S and A1 (STM32F103ZET6) (#14291) 
- Now compiles and works correctly with changes to HAL timers and watchdog.
- Does NOT include awesome work on touch screen function.
- Does have working LCD and SD-based EEPROM.
 2019-06-15 14:28:22 -05:00
Ludy
6fb3db1633 Update German language (#14294) 2019-06-15 14:26:14 -05:00
Scott Lahteine
a17f057daa
Fix word wrapping on select screens 2019-06-15 14:06:23 -05:00
Tanguy Pruvot
f2cfa408b7 Touch-MI probe by hotends.fr (#14101) 
A simple Z probe using a magnet to deploy a probe. See https://youtu.be/E7Ik9PbKPl0 for the sensor description...
 2019-06-14 22:19:48 -05:00
Scott Lahteine
26de051e92 HAL SPI pin init cleanup 2019-06-14 20:17:25 -05:00
Scott Lahteine
50c9b33ed7 !ENABLED => DISABLED 2019-06-14 00:44:49 -05:00
teemuatlut
29afd11cbf Updates for TMC2660 init (#14245) 2019-06-13 23:16:10 -05:00
Scott Lahteine
dfdbd1e75f Use TEST macro where possible 2019-06-13 20:59:12 -05:00
teemuatlut
12a270fd29 Fix TMC5160 and TMC2160 PWMCONF init 2019-06-13 20:57:12 -05:00
Scott Lahteine
fc73a8b004 Add AXIS_HAS_SQUARE_WAVE shorthand 2019-06-13 20:57:12 -05:00
mb300sd
bf8bfb5c66 Add Coolant Control M7/M8/M9 (#10745) 2019-06-13 18:43:11 -05:00
Aliaksei Kvitsinski
648a91bce8 Support for Z-Bold board (#14024) 2019-06-13 03:21:18 -05:00
MastS
18904c42f6 Fysetc LCD backlight timeout (#14265) 2019-06-12 21:59:39 -05:00
Scott Lahteine
bc2ff9b41f Fix M605 bugs 
Fixes #14191
 2019-06-12 20:01:08 -05:00
Scott Lahteine
f7792c0192 Group manual move options 2019-06-12 19:49:18 -05:00
Tanguy Pruvot
7d1eafc80a STM32F1: C++14 for static_assert, etc. (#14278) 2019-06-12 18:44:32 -05:00
Msq001
26e7e33698 Fix bug in STM32F1 WRITE macro (#14275) 2019-06-12 06:30:24 -05:00
Scott Lahteine
04715e04ee Minor M100 cleanup 2019-06-12 06:14:40 -05:00
Scott Lahteine
356410dcfc Move crc16 function to libs 2019-06-12 06:14:39 -05:00
Scott Lahteine
2a96d4e23a Move number-to-string functions to libs 2019-06-11 07:51:47 -05:00
Scott Lahteine
1ef95013f0 Update Marlin.cpp includes, defines 2019-06-11 07:30:51 -05:00
Kaushik Vemparala
c88d9ae282 Option to leave heaters set on SD abort (#14251) 2019-06-10 23:57:55 -05:00
Tanguy Pruvot
8cf5504a34 Redundant but faster recovery.enabled test (#14175) 2019-06-10 23:33:35 -05:00
Tanguy Pruvot
c3e5225531 Add SPI EEPROM to STM32F1 (#14239) 2019-06-10 23:30:23 -05:00
felixstorm
9439fab7fd Fix ESP32 servos, platformio.ini, etc. (#14247) 2019-06-10 23:22:19 -05:00
yangwenxiong
b0a4ea79b8 BigTreeTech SKR Mini v1.1 (#14041) 2019-06-10 21:10:51 -05:00
Robby Candra
f30b89953d runout.distance_mm LCD edit item (#14066) 2019-06-10 20:18:06 -05:00
mikeshub
a3f034b95e FFCP updates. Update XY soft endstops on tool_change (#14125) 2019-06-10 18:01:42 -05:00
InsanityAutomation
b7eeb5b13b Move BLTouch options to adv config (#14131) 
Plus other BLTouch and menu enhancements.
 2019-06-10 17:46:42 -05:00
Scott Lahteine
0ca2073625 ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED => SD_ABORT_ON_ENDSTOP_HIT 2019-06-10 17:28:35 -05:00
thisiskeithb
662e7da8a4 Fix USE_BIG_EDIT_FONT bug (#14252) 2019-06-09 19:37:14 -05:00
teemuatlut
cccc51ee0e TMC Square Wave Stepping mode (#14195) 2019-06-09 05:08:05 -05:00
Scott Lahteine
80ce0d2bdb Whitespace cleanup 2019-06-08 06:40:44 -05:00
Scott Lahteine
455f0de817 Undefine sanity check tests when done 2019-06-08 06:29:28 -05:00
Robby Candra
7e07a3888b Fix PLR Z bug affecting Cartesians (#14230) 2019-06-08 05:27:58 -05:00
Robby Candra
5ca8d51e12 Ability to insert G-code in front of queue (#14229) 2019-06-08 05:23:53 -05:00
BigIronGuru
293018f76c Apply needed BLTouch patch (#14233) 2019-06-07 21:43:20 -05:00
Scott Lahteine
ffb76b75d7
fix TMC2208 boot loop with SW UART (#14135) 
Need stepper .begin() before calling susbequent .push()
 2019-06-07 07:27:10 -05:00
InsanityAutomation
4138b1f9ae Option to disable Case Light brightness control (#14165) 2019-06-07 07:23:42 -05:00
Tanguy Pruvot
764f0d9c1c STM32F1: Servo "soft" PWM via timer interrupt (#14187) 2019-06-07 07:11:48 -05:00
InsanityAutomation
66e22d9f5a ExtUI Heated Chamber support (#14198) 2019-06-07 07:08:41 -05:00
Scott Lahteine
9206c0e869 Use limit switch overrides 2019-06-05 22:27:06 -05:00
Scott Lahteine
34d2801bbe Rename pins file (2) 2019-06-05 21:41:58 -05:00
Scott Lahteine
fa3b5fb059 Uppercase pins filename 2019-06-05 21:41:58 -05:00
Scott Lahteine
858b2fa21a Fix thermistor table 2019-06-05 21:39:39 -05:00
InsanityAutomation
f6ec00d776 Update thermistor and working config 2019-06-04 20:25:00 -04:00
InsanityAutomation
bbcb61e042 Initial Commit - Add board 2019-06-03 23:49:19 -04:00
Tanguy Pruvot
e4260a41cb Fix a DEBUG_LEVELING_FEATURE string copy (#14200) 2019-05-31 18:52:11 -05:00
Ryan
9d9030a39c Fix Archim1 SD card (#14184) 2019-05-30 19:58:38 -05:00
InsanityAutomation
123e58d9c3 Heated Chamber for Graphical LCD (#14190) 2019-05-30 18:31:50 -05:00
Scott Lahteine
93ab16c6e4 Remove old mixing ISR comment 2019-05-30 17:05:16 -05:00
Scott Lahteine
6572848d7f Fix stepper timing bug 2019-05-30 16:58:53 -05:00
Bob Kuhn
688b54d66a DUE USB composite device field corrections (#14185) 2019-05-30 16:26:48 -05:00
InsanityAutomation
f889cc6ea6 ExtUI parity with SPI LCDs (#14172) 2019-05-30 16:24:13 -05:00
Scott Lahteine
07021c85c8 Tweak timer16_Sequence_t 2019-05-30 16:09:37 -05:00
Roman Moravčík
d70929f7c0 Update Slovak language (#14179) 2019-05-30 15:57:14 -05:00
Tanguy Pruvot
e3a468f2cd STM32F1: FSMC only on chips with 100/144 pins (#14180) 2019-05-30 15:51:02 -05:00
Ludy
8e8e48f900 Fix links in templates, gcode.h (#14160) 2019-05-28 21:39:55 -05:00
InsanityAutomation
34ae76025e Clear Pausing message after M600 park (#14171) 2019-05-28 21:36:14 -05:00
Ludy
bd494a6bd6 Update defines for patched temperature macros (#14161) 2019-05-28 17:43:31 -05:00
doggyfan
e09d8811c1 Apply grace period to thermistor failure testing (#14167) 2019-05-28 15:36:03 -05:00
InsanityAutomation
0f04ba016f Adjust tool offset menus (#14153) 2019-05-27 21:29:08 -05:00
teemuatlut
bf4a0db97f TMC LCD followup (#14134) 2019-05-27 21:24:20 -05:00
Minims
32afe1d102 Fix TOOLCHANGE_ZRAISE warning (#14156) 2019-05-27 19:51:29 -05:00
Robby Candra
5515f88452 Clarify SD longname string size (#14148) 2019-05-27 19:50:48 -05:00
Tanguy Pruvot
5f42d3a8b4 BLTouch French updates (#14137) 2019-05-27 01:02:35 -05:00
Scott Lahteine
d3bb5b69ba Apply NOLESS/NOMORE 2019-05-26 20:55:00 -05:00
Scott Lahteine
b315157053 Apply const to mcp4728 2019-05-26 20:54:24 -05:00
Scott Lahteine
3c179bbd47 Simpler G28 home axis conditions 2019-05-26 16:26:55 -05:00
Scott Lahteine
352734494b Reduce some M43 strings 2019-05-26 16:21:28 -05:00
Scott Lahteine
b14cc0d7c5 Remove extra gcode. prefix 2019-05-26 16:18:45 -05:00
Scott Lahteine
c6d39319de Fix some whitespace 2019-05-26 16:18:43 -05:00
InsanityAutomation
212860f090 Always change to Tool 0 on G29 (#14146) 2019-05-26 14:53:21 -05:00
Giuliano Zaro
7b838f31be DUE HAL cleanup (#14126) 2019-05-26 14:51:32 -05:00
Chris
36a0376c36
fix TMC2208 boot loop with SW UART 
Need stepper .begin() before calling susbequent .push()
 2019-05-26 13:07:12 +02:00
Robby Candra
df7733425c Shorten pause message for 4 line LCD (#14097) 2019-05-26 02:33:52 -05:00
Scott Lahteine
605ec0a478 Fix thermistor table warning 2019-05-26 01:30:20 -05:00
doggyfan
90121047d9 Fix thermal protection with user thermistor (#14130) 2019-05-25 23:37:08 -05:00
Scott Lahteine
81cee05476 Update some env in pins.h 2019-05-25 23:17:50 -05:00
Scott Lahteine
47fd74a98d Clean up fast_pwm.cpp 2019-05-25 23:05:01 -05:00
Scott Lahteine
49229d97db Consistent _useTimerX tests 2019-05-25 23:05:01 -05:00
Scott Lahteine
8924389dfc Tweak servo µs macros 2019-05-25 22:33:51 -05:00
InsanityAutomation
49e83dd7c8 BLTouch V3.1 changes (#14104) 2019-05-25 21:56:47 -05:00
Scott Lahteine
14fe41f6b2 Update Z probe offset comment 2019-05-25 19:41:15 -05:00
Scott Lahteine
f8bede6b5e Fix some HAL includes 2019-05-25 19:20:17 -05:00
Bryan
0ef5d667b6 Fixed M43 parameter bug (#14099) 2019-05-25 18:23:25 -05:00
teemuatlut
1c86fbc60b TMC updates, capture LCD changes (#14074) 2019-05-25 18:22:12 -05:00
felixstorm
74f44783ac ESP32 servo support (#14109) 2019-05-25 18:12:24 -05:00
felixstorm
bc5a1fe562 Various fixes for ESP32 (#14102) 2019-05-25 17:06:00 -05:00
Giuliano Zaro
e1bf34bdc9 Ruramps4d typo fix (#14096) 2019-05-25 16:41:08 -05:00
Scott Lahteine
7cce6b8d68 Bring configs up to date (MANUAL_FEEDRATE) 2019-05-25 16:31:13 -05:00
Scott Lahteine
44caf70917 Improve editing, fix some small value editing 2019-05-25 15:29:00 -05:00
Scott Lahteine
612eaa87bd Fix "back" items in some sub-menus 2019-05-25 15:28:52 -05:00
Scott Lahteine
c5dc2e5a71 Update advanced BLTouch menu items 2019-05-25 15:26:25 -05:00
Scott Lahteine
48d1bd29cb Shift m before compare to 0 2019-05-25 15:22:15 -05:00
InsanityAutomation
9f69fbe5ee Move some menu items (#14118) 2019-05-25 15:16:00 -05:00
Scott Lahteine
fc52c43a26 Some documentation updates 2019-05-24 16:30:44 -05:00
Tanguy Pruvot
24b1818245 Secure STM32F1 servo code and M280 detach (#14085) 2019-05-22 16:57:19 -05:00
Scott Lahteine
a49919396a LPC1768 MarlinServo => libServo 2019-05-22 16:54:52 -05:00
Scott Lahteine
2b5046659a Tweak Marlin headers, comments 2019-05-22 16:54:52 -05:00
Scott Lahteine
cc862a8213 Replace some functions with lambdas 2019-05-22 16:54:35 -05:00
Ludy
fafd73a3af Update copyright in headers (#14092) 2019-05-22 16:24:13 -05:00
Giuliano Zaro
2298923a9b Update Italian language (#14095) 2019-05-22 16:23:41 -05:00
Ludy
41f61a12b8 Update German language (#14093) 2019-05-22 16:23:16 -05:00
doggyfan
594f6b14be Limit user thermistor to 999, fix thermistor table macro (#14080) 2019-05-21 21:31:05 -05:00
Giuliano Zaro
a74aad3b4a Clean up HALs / FastIO (#14082) 2019-05-21 18:28:12 -05:00
Scott Lahteine
4ef364a073 Sanity check probe offsets must be integers 2019-05-21 17:16:21 -05:00
Scott Lahteine
cfca07852a Backlash linker error workaround 
Fix #14045
 2019-05-20 21:52:56 -05:00
Scott Lahteine
aeec9ef76b Update backlash code 2019-05-20 21:34:08 -05:00
Scott Lahteine
7b4c3bd92a Fix call to synchronize in lcd_pause_job 2019-05-19 15:51:45 -05:00
Scott Lahteine
9bf65eacaa Remove old adv config heading 2019-05-19 15:24:01 -05:00
Pavel4e5
3cd19a8ec0 Improve Zonestar keypad responsiveness (#14056) 2019-05-18 20:52:55 -05:00
Tanguy Pruvot
402f1f7307 STM32F1: STM32_HIGH_DENSITY is auto defined in HAL (#14057) 
- Fix the `fsmc` and `sdio` units which required hard defines for use.
 2019-05-18 20:45:22 -05:00
Tanguy Pruvot
87e7193259 Fix M226 sign warning (for most platforms) (#14049) 2019-05-18 16:15:48 -05:00
Tanguy Pruvot
256f810df2 Add open-drain output mode to STM32F1 FastIO (#14050) 
- This mode is often used/preferred to drive printer boards' MOSFETs.
- Can generally boost the allowed output power (for hotbed,nozzle and fans).
 2019-05-18 16:12:00 -05:00
Bob Kuhn
1dad6e754b Neopixel background LED option (#14025) 2019-05-18 02:36:37 -05:00
InsanityAutomation
84ac5b360b Fix ExtUI mesh functions (#14027) 2019-05-17 20:37:23 -05:00
Scott Lahteine
9b5f9dda0e Update analog pins labels 2019-05-17 20:22:25 -05:00
FanDjango
85fb33a060 BLTOUCH tweaks, new v3.1 command (#14015) 2019-05-17 19:10:18 -05:00
GUEST.it
62ef54cb81 UBL: Log and display G29 progress (#14036) 2019-05-17 19:02:21 -05:00
GUEST.it
7907eec04c Fix power loss recovery with SINGLENOZZLE (#14033) 2019-05-17 18:47:15 -05:00
Scott Lahteine
efe651e749 Add THERMISTOR_NAME for 1000 2019-05-17 18:26:53 -05:00
Scott Lahteine
0b056970c6 Fix file.open in STM32 eeprom emu 2019-05-17 18:26:53 -05:00
InsanityAutomation
06f3273531 Fix DELTA pulse wait bug (#14028) 2019-05-17 16:16:56 -05:00
Marcio Teixeira
7ccbcf2eaa Fix TMC EEPROM regression (#14008) 
Partially undo 15357af to ensure TMC code is initialized in the proper order.
 2019-05-16 20:38:03 -05:00
Marcio Teixeira
9558962d59 Fix DUE HAL SW SPI compile error (#14005) 2019-05-16 20:36:19 -05:00
InsanityAutomation
07afe69cee Fix some bad AZTEEG_X5_MINI pins (#14011) 2019-05-16 20:33:00 -05:00
Chris Pepper
451ea996c9
[LPC176x] Fix switch fallthrough 2019-05-15 10:35:26 +01:00
Tanguy Pruvot
d7b0369e39 STM32: Fix SD EEPROM emulation conflict (#14012) 2019-05-15 02:42:10 -05:00
Scott Lahteine
785c01f2bc Use US spelling of 'behavior' 2019-05-15 01:49:17 -05:00
Sam Lane
7f1e0c5670 Update EXTRA_LINADV_K with Marlin bit macros (#13993) 2019-05-15 01:07:07 -05:00
Bob Kuhn
48bd8899bd Cohesion 3D Remix: Onboard SD card, Fysetc LCD (#13991) 2019-05-15 00:59:57 -05:00
FanDjango
dcaefc68a5 BLTouch.init should not deploy (#13988) 
Low or unknown probe clearance on init (even at powerup) is a risk and therefore, a deploy should be avoided because dragging the pin is possible: A deploy goes into alarm if it can't extend fully and then the subsequent stow will fail.
 2019-05-14 23:55:11 -05:00
Tanguy Pruvot
8075893352 STM32: fix sdcard filename conversion 2019-05-12 04:26:21 +02:00
chai-md
940ff8e7c8 Improve LV8729 stepping (#13776) 2019-05-11 19:02:19 -05:00
InsanityAutomation
991ee7552b Restore menu edit to 32bit value (#13976) 2019-05-11 18:44:35 -05:00
Tanguy Pruvot
93dd097b1c Use E2END, if defined, for STM32F1 (SD) (#13981) 2019-05-11 18:22:31 -05:00
InsanityAutomation
5108e4b6aa Cleaner EEPROM auto init (#13975) 2019-05-11 16:54:03 -05:00
Bob Kuhn
456a0ee76b Improve Due SW SPI, Fysetc sanity checks, &c. (#13939) 2019-05-11 16:51:39 -05:00
Robby Candra
7b78a20fb7 Fix: Debug Memory Dump size (#13957) 
* Fix Memory Dump size

* Fix Compile error on Memory Dump
 2019-05-11 11:44:39 -05:00
Scott Lahteine
a613bcad2d Fix some spelling 2019-05-10 20:39:19 -05:00
Tanguy Pruvot
62b36d1b98 Fix STM32 timer warnings (#13946) 2019-05-10 20:00:21 -05:00
Giuliano Zaro
f22c9a1ae1 Fix G-code parser with MMU2 (#13951) 2019-05-10 19:57:15 -05:00
Marcio Teixeira
746c38f4be Fix HAL_DUE multiple define error with graphical LCD (#13971) 2019-05-10 19:52:43 -05:00
Bob Kuhn
75eca5c4f8 Fysetc pins updates for RAMPS and SKR 1.3 (#13963) 2019-05-10 19:29:28 -05:00
Marcio Teixeira
227f29090d Add heater timeouts to ExtUI (#13970) 
- Add local UI methods to get heater timeout state.
- Add methods to resume timed-out heaters.
- Re-enable heaters on UI temperature request.
- Make `ExtUI` show a dialog box if pause needs a button press after reheat.
 2019-05-10 15:56:13 -05:00
Bob Kuhn
fa3739aa23 M100: LPC1768 and DUE compatibility (#13962) 2019-05-09 21:57:44 -05:00
InsanityAutomation
3f758d9e00 Fix some edit items for 16-bit encoder (#13948) 2019-05-09 18:28:47 -05:00
ManuelMcLure
51acbb2201 Prevent HOST_PROMPT_SUPPORT compile error (#13943) 2019-05-09 11:48:31 -05:00
Scott Lahteine
ad4ffa1d2f
Use C++ language supported 'nullptr' (#13944) 2019-05-09 11:45:55 -05:00
Tanguy Pruvot
e53d7e5517 STM32: ADC warning fix (#13933) 2019-05-09 00:33:38 -05:00
Scott Lahteine
23ec650410 Consolidate Malyan LCD and ExtUI 2019-05-07 21:31:30 -05:00
InsanityAutomation
6811e2921b BLTouch v3 / 3DTouch Interoperability & performance (#13814) 2019-05-07 21:25:54 -05:00
Giuliano Zaro
40aff7e1f2 Remove extra MMU (non-12V) code (#13938) 
`check_version` in state -5 should not be needed since it has already been called in state -4 and the tested build nr is only updated in state -4.
 2019-05-07 21:02:08 -05:00
Tanguy Pruvot
11adcf1ce3 Add'l PLR options, AVR strstr_P compat (#13880) 2019-05-07 20:38:40 -05:00
InsanityAutomation
5dcb25664f Option to Auto-Initialize EEPROM (#13935) 2019-05-07 16:30:31 -05:00
Ludy
a504366138 Fix probe fan compiling error (#13930) 2019-05-07 14:14:12 -05:00
Tanguy Pruvot
24e956d168 Avoid int8_t underflow on filament runout (#13895) 2019-05-07 13:58:10 -05:00
Stephan
483822f3aa Fix some THERMAL_PROTECTION_CHAMBER issues (#13678) 2019-05-06 19:55:01 -05:00
doggyfan
23a8707ef1 Configurable Thermistor (#13888) 2019-05-06 18:51:06 -05:00
J.C. Nelson
172abc305b Malyan M200 core fixes (#13927) 2019-05-06 18:07:13 -05:00
Scott Lahteine
a36782ac1d Define more u8g command macros 2019-05-06 17:26:34 -05:00
Scott Lahteine
f9a50f451d Serial out cleanup 2019-05-06 17:26:34 -05:00
Scott Lahteine
9853331b34 Fix temp init, loosen ADC grace period 2019-05-05 22:55:03 -05:00
Tanguy Pruvot
a4c24511f7 STM32: Fix Marduino SBI/CBI redefine (#13912) 2019-05-05 22:06:30 -05:00
Ludy
c837e9250c Define tmc variables where needed (#13918) 2019-05-05 22:04:47 -05:00
Ludy
f96eaad1ea Unused variable cleanup (#13917) 2019-05-05 22:01:04 -05:00
Ludy
421d526ba7 Update German language (#13915) 2019-05-05 22:00:19 -05:00
Giuliano Zaro
b07360f32a Update Italian language (#13916) 2019-05-05 21:59:34 -05:00
Robby Candra
79955f0c89 Fix PLR file delete bug (#13860) 2019-05-04 23:30:47 -05:00
ManuelMcLure
09f1b58146 Fix HOST_PROMPT_SUPPORT compile issue (#13847) 2019-05-04 22:55:51 -05:00
Giuliano Zaro
e2a77ed881 Bring chamber temp to completion (#13837) 2019-05-04 22:51:47 -05:00
Robert Mendon
24177954dd Add missing AZSMZ Mini SPI pins (#13824) 2019-05-04 22:04:01 -05:00
kAdonis
ee73e17c9b Hide 'vsense' report row if not used (#13884) 2019-05-04 22:00:24 -05:00
jmdearras
68004174d9 Fix thermistor 501 name (#13839) 2019-05-04 21:40:41 -05:00
Bob Kuhn
c48e6be366 Fysetc panel, RUMBA and ReARM pins, SPI mode 3 (#13900) 2019-05-04 17:59:36 -05:00
Chris
fd9d3ae181 Re-Arm 4x TMC2208 stepper improvement (#13819) 2019-05-04 17:26:13 -05:00
Tanguy Pruvot
e7b3720b81 Menu edit accel in increments of 25 (#13850) 2019-05-04 17:21:58 -05:00
Tanguy Pruvot
7da63fa03f Fix NOMORE() sign warning in stepper (#13894) 2019-05-04 15:59:38 -05:00
Roman Moravčík
6d0ce033c2 Update Slovak language. (#13840) 2019-05-04 15:58:01 -05:00
InsanityAutomation
3fcab8dbf1 Option to disable fans during pause (#13820) 2019-05-04 15:50:44 -05:00
Chris Pepper
66f7065248
[LPC176x] Update extra script to support Python3 (#13908) 2019-05-04 20:52:28 +01:00
Scott Lahteine
2f32a6612d Clean up Temperature::set_fans_paused 2019-05-04 14:36:59 -05:00
Marcio Teixeira
15357af67c Backlash cleanup (#13659) 
…And save backlash, fil. sensor, ExtUI userdata to EEPROM.
 2019-05-03 23:53:15 -05:00
Robby Candra
0181e57417 Add a minimum Z change option to power-loss recovery (#13859) 2019-05-02 22:29:05 -05:00
Robby Candra
c369477cb0 Fix bug: diveToFile breaks M23 (#13865) 2019-05-02 15:54:24 -05:00
Tanguy Pruvot
e5438a9a03 settings: store runout sensor on/off (#13876) 2019-05-02 00:47:26 -05:00
Scott Lahteine
e7682eea42
Use Arduino.h include wrapper (#13877) 2019-05-02 00:45:50 -05:00
Tanguy Pruvot
51d1e0f1dd Auto-mount the SDIO SD card (#13879) 2019-05-02 00:45:21 -05:00
Thomas Moore
ee243e4edf Fix mixing extruder filament change (#13803) 2019-05-01 21:55:58 -05:00
Scott Lahteine
bf54251a10
Finish, improve, clean up FYSETC_MINI_12864 revisions (#13871) 2019-05-01 20:05:29 -05:00
Scott Lahteine
9372e2603c Simpler neopixel comment 2019-05-01 13:55:51 -05:00
Tanguy Pruvot
3272d0db01 Update French language (#13866) 2019-05-01 13:00:07 -05:00
Chris Pepper
95beafa9a2
Fix typo 2019-05-01 16:30:21 +01:00
Ludy
408a5f08dc Update German language (#13853) 2019-05-01 01:25:57 -05:00
Tanguy Pruvot
cf3c746029 Improve French language (#13851) 2019-05-01 01:12:25 -05:00
Clinton James
2740cc64d8 Add SD Release when no SD_DETECT_PIN exists (#13857) 2019-05-01 01:00:21 -05:00
Luu Lac
39ebca6b5f Fix FYSETC, MINIPANEL, MKS_MINI_12864 display (#13864) 2019-05-01 00:37:52 -05:00
Giuliano Zaro
93dcb537ef Update Italian language (#13809) 2019-04-30 20:31:40 -05:00
Roxy-3D
142c8e2fed
Remove redundant Frivolous Game Options 2019-04-28 14:03:53 -05:00
Scott Lahteine
e43afb1a58 Clean up SKR pins 2019-04-27 14:56:12 +02:00
Scott Lahteine
9ccbd382e7 Update Watchdog description 2019-04-27 14:56:12 +02:00
Scott Lahteine
b6279abd30 Better THERMAL_PROTECTION_GRACE_PERIOD 
See #13783
 2019-04-27 14:40:09 +02:00
chai-md
ed9eaa1942 Fix a comment in fwretract.cpp (#13802) 2019-04-26 09:36:29 +02:00
InsanityAutomation
610fb46683 Fix some ExtUI issues (#13799) 2019-04-26 09:32:01 +02:00
Bob-the-Kuhn
db89fc0304 Revert "bring my copy up to date" 
This reverts commit 503905c628.
 2019-04-25 17:38:41 -05:00
Bob-the-Kuhn
503905c628 bring my copy up to date 2019-04-25 12:08:49 -05:00
Bob-the-Kuhn
73726d56b3 Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x 2019-04-25 12:06:01 -05:00
Scott Lahteine
5051909c3c
Update do_select_screen for general use (#13800) 2019-04-24 10:13:44 -05:00
Scott Lahteine
63f6ad3fd2 Basic RAMPS SD_DETECT_PIN override 2019-04-23 18:10:21 -05:00
InsanityAutomation
c6632925e3 Force no move on IDEX full control mode (#13797) 2019-04-23 15:20:59 -05:00
Giuliano Zaro
e2dd2268e8 Add a Z raise-between-probes to G34 (#13791) 2019-04-23 13:40:55 -05:00
Giuliano Zaro
0f9c49ccba Update Italian language (#13790) 2019-04-23 13:36:05 -05:00
Giuliano Zaro
d77ef437db Fix warning for redefined DEBUG_PRINT_P (#13789) 2019-04-23 13:35:02 -05:00
Marcio Teixeira
ca7f6ff287 Fix MSG_En messages for consistency (#13788) 2019-04-23 13:31:51 -05:00
Scott Lahteine
6ff81a33c1 Provide JSON values for SOFT_PWM_SCALE 2019-04-22 14:06:14 -05:00
Scott Lahteine
0c4d3e6622 Improve M906 description 2019-04-22 13:48:02 -05:00
Tanguy Pruvot
04ae3ba1fd Major update to French language (#13784) 2019-04-22 13:31:04 -05:00
chai-md
78d7349fd7 Remove extra Z raises in tool change (#13782) 2019-04-21 21:06:46 -05:00
Kajetan Rzepecki
875e673a8c Add HAL-based thermal protection grace period for all heaters (#13778) 2019-04-21 20:50:32 -05:00
Bob Kuhn
81ca5a4cd4 Fix and improve FYSETC LCD support (#13767) 2019-04-21 20:48:53 -05:00
felixstorm
4e35e6c705 Fix SS pin in ESP32 HW SPI (#13781) 2019-04-21 17:15:15 -05:00
felixstorm
4a48b70c0b Fix (re-)defines in HAL_ESP32 (#13780) 2019-04-21 17:14:38 -05:00
Ludy
4228fd3e03 Update German language (#13769) 2019-04-20 15:01:56 -05:00
Kajetan Rzepecki
5f70c876ae Fix _temp_error-related compile error (#13768) 2019-04-20 13:57:38 -05:00
Kajetan Rzepecki
ea1ee02b53 Disable hardware PWM on ESP32 I2S expander (#13762) 2019-04-20 13:41:17 -05:00
Scott Lahteine
bddb776ddb Add chamber max-temp check 
Followup to #13756
 2019-04-19 22:18:55 -05:00
Marcio Teixeira
d0c1eee53b Add extra max-temp safety checks (#13756) 2019-04-19 21:37:12 -05:00
Marcio Teixeira
4ac28ba6b3 Add missing file (#13754) 2019-04-19 20:20:45 -05:00
jmdearras
b65cb5704d Fix, improve FYSETC_MINI_12864 support (#13730) 2019-04-19 20:11:51 -05:00
Scott Lahteine
69c333ead9 More universal Formbot pins 
Replace `ROXYs_TRex` with pre-defines of the relevant pins at the configuration level.
 2019-04-18 21:09:34 -05:00
Scott Lahteine
0a6835fbea More robust HAS_LCD_CONTRAST 2019-04-18 21:09:34 -05:00
Marcio Teixeira
2e3d121ac4 Squelch compiler warning (#13739) 2019-04-18 13:18:49 -05:00
Kajetan Rzepecki
d83a7924e6 Fix ESP32 TOGGLE() with I2S expander (#13743) 2019-04-18 13:15:35 -05:00
Jimmy Wennlund
e6f6ed76c8 Show UBL Activate/Deactivate menu for current state (#13744) 2019-04-18 13:13:05 -05:00
Marcio Teixeira
08f21335a6 Fix bad opcode in LIGHTWEIGHT_UI; add 32-bit HAL and Due compatibility (#13751) 2019-04-18 13:10:58 -05:00
Kajetan Rzepecki
7c8ee0cd5b Enable more ADC1 channels (pins 32-39) (#13742) 2019-04-18 13:01:24 -05:00
Bob-the-Kuhn
520585c5ed Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x 2019-04-17 15:34:29 -05:00
Kajetan Rzepecki
e1acc09c6e Fix LPC1768 HAL SSD* screen init (#13741) 2019-04-17 14:57:50 -05:00
Marcio Teixeira
836435c5ef Fix action_edit int range bug (#13737) 2019-04-17 14:55:31 -05:00
Antonio Pérez
bf28ad4b6c Fix clear of Z position last digit (#13731) 2019-04-17 14:52:20 -05:00
Marcio Teixeira
866e2d41dc Correct range of LCD axis step editing (#13727) 2019-04-16 15:45:31 -05:00
Scott Lahteine
ab8052887f Add missing MSG_PAUSE_PRINT_INIT_1 for en 2019-04-16 13:54:20 -05:00
petrzjunior
12d340cf2a Update Czech language (#13729) 2019-04-16 13:53:14 -05:00
Robby Candra
e8dc87a2b7 Fix updated Allen Key pause probe logic (#13723) 2019-04-16 12:35:58 -05:00
Robby Candra
7ca1fea22b Option to pause probe deployment only when triggered, for manually-deployed allen-key probe (#13698) 2019-04-16 01:32:43 -05:00
Robby Candra
35160dfb7a Simplify PLR homing when Z homes to max (#13718) 2019-04-16 00:17:27 -05:00
Scott Lahteine
92ed9a2bb6 Fix is_M29 
Followup for #13013
 2019-04-15 23:47:06 -05:00
jmdearras
5f49b65c1f Move LPC SD options to configs, add MKS_MINI_DISPLAY to SKR boards (#13712) 2019-04-15 22:55:33 -05:00
Bob Kuhn
9b578ca343 Support FYSETC_MINI_12864 on Re-ARM, RAMPS_FD, MKS SBASE (#13717) 2019-04-15 22:54:11 -05:00
Scott Lahteine
9992c424f5 Patch G92.9 flags 
Followup to #13703
 2019-04-15 20:26:40 -05:00
ManuelMcLure
b1c13bce58 Fix EEPROM_CHITCHAT (and debug_out.h) (#13716) 2019-04-15 20:21:26 -05:00
Msq001
455ee23499 Fix, improve Power Loss Recovery (#13703) 
- Save and restore workspace offsets
- Add retract and purge (hidden) options
- Always restore axis relative modes
- Use added `G92.9` to do position restores
 2019-04-15 18:53:39 -05:00
Laurent
df75a606ff Support MKS SGen board (#13694) 2019-04-15 17:03:10 -05:00
Kajetan Rzepecki
20dc45bca7 Refactor, fix ESP32 WebSocketSerial (#13689) 2019-04-15 16:32:20 -05:00
Roman Moravčík
db373f130c Update Slovak language (#13692) 2019-04-15 16:14:49 -05:00
Kajetan Rzepecki
6fe90f0324 Define I2S pins for ESP32 (#13714) 2019-04-15 16:13:59 -05:00
InsanityAutomation
aa0f7afbe6 Fix call to uninitialized PWM pin, heater 2 overlap (#13674) 2019-04-15 15:57:34 -05:00
Bob-the-Kuhn
57aaa9110b Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x 2019-04-13 21:14:52 -05:00
Scott Lahteine
6a71df2925 Tweak babystep add_steps 2019-04-13 14:14:26 -05:00
Bob-the-Kuhn
9dd4252b39 Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x 2019-04-12 22:07:12 -05:00
Marcio Teixeira
bdfffee037 Modify Z-offset overlay for clarity (#13660) 2019-04-12 15:43:29 -05:00
Stephan
84273557f9 Move and update heated chamber settings (#13671) 
Co-Authored-By: the-real-orca <stephan.veigl@gmail.com>
 2019-04-12 15:38:10 -05:00
Ludy
62b4265410 Update German language (#13665) 2019-04-12 14:48:13 -05:00
Scott Lahteine
b18316dd37 Fix some spacing 2019-04-12 13:35:42 -05:00
Scott Lahteine
f2ba0a5ae7 Tweak some formatting 2019-04-12 13:15:37 -05:00
Scott Lahteine
7e58d33a2e Update some headers 2019-04-12 13:04:04 -05:00
Giuliano Zaro
64ee064ded Update Italian language (#13661) 2019-04-12 12:22:43 -05:00
Scott Lahteine
14b561f182 Extra AxisEnum values for E0-E5 2019-04-12 12:13:48 -05:00
Robby Candra
9e86fc3831 Require homing to toggle leveling (#13652) 2019-04-11 14:09:41 -05:00
Ludy
9fd3e64ba8 Fix compile error with EXTRUDER>1 (#13651) 2019-04-11 13:58:50 -05:00
Jamie
509dc283f2 Restore declarations of G53-G59 (#13654) 2019-04-11 13:51:05 -05:00
chai-md
2adc37becc MAGNETIC_SWITCHING_TOOLHEAD (#13629) 2019-04-11 13:29:17 -05:00
ManuelMcLure
492883859e Don't protect unused CS pins (#13647) 2019-04-10 21:57:57 -05:00
Scott Lahteine
9898f53361 Fix missing IS_SD_PRINTING 2019-04-10 21:48:16 -05:00
Scott Lahteine
1e59a2ac73 Hide pause/stop unless active printing 2019-04-10 19:46:59 -05:00
Scott Lahteine
ae42206500 Fix SD_REPRINT_LAST_SELECTED_FILE 2019-04-10 17:43:08 -05:00
Scott Lahteine
d72946a8d7 Fix LPC1768 build with no watchdog 
Fix issue mentioned at https://github.com/MarlinFirmware/Marlin/pull/13587#issuecomment-481737509
 2019-04-10 17:34:15 -05:00
Scott Lahteine
cee3b172b9
Fix Marlin splash screen logic (#13646) 2019-04-10 17:14:57 -05:00
ANMay-ru
052f2ac352 Fix RURAMPS4D baud rate (#13644) 2019-04-10 15:53:21 -05:00
Marcio Teixeira
e6ebd30f60 Fix LCD issue on stepper timeout (#13630) 
- Remove a re-paint of the status screen on stepper timeout, which would cause a garbled LCD with `LIGHTWEIGHT_UI` and could interrupt whatever else the user might be doing in a submenu (such as playing games!)
- Use the helper function to reset stepper timeout.
 2019-04-10 15:51:48 -05:00
klcjr89
a8edd4f6d4 Fix Azteeg X5 MINI BOARD_NAME (#13632) 
Co-Authored-By: klcjr89 <klcjr89@users.noreply.github.com>
 2019-04-10 15:46:12 -05:00
Scott Lahteine
5018fdacbe
Support FYSETC_MINI_12864_PANEL (#13365) 2019-04-09 18:34:29 -05:00
InsanityAutomation
4900c28bf6 Fix IDEX tool-change, and more (#13614) 2019-04-09 18:33:40 -05:00
InsanityAutomation
ba31d39f6d Azteeg X5 Mini support (#13425) 2019-04-08 23:10:45 -05:00
Scott Lahteine
9cb5c57b84 Adjustments to ui8tostr_percent 2019-04-08 21:47:50 -05:00
Scott Lahteine
321a5e6580
Fix SD card reselect when scrolled (#13624) 
- Change encoder position to 16-bit integer.
- Fix `SD_REPRINT_LAST_SELECTED_FILE` when the screen is scrolled.
 2019-04-08 21:10:41 -05:00
Scott Lahteine
0e3c9e726d Set default Raptor runout/caselight pins 2019-04-08 18:18:08 -05:00
Scott Lahteine
5e38d70697 Fix M217 report label, general cleanup 2019-04-08 18:18:08 -05:00
Scott Lahteine
fae2b7edc3 Update MMU2 code style 2019-04-08 18:13:42 -05:00
Scott Lahteine
c8a83fb122 SPINDLE_LASER_ENABLE => SPINDLE_LASER_ENA 2019-04-08 18:13:41 -05:00
Scott Lahteine
9abe9aff56
Confirm before starting SD print (#13616) 2019-04-08 13:44:35 -05:00
Scott Lahteine
7e0008f5b3 Fix SETCURSOR_RJ 2019-04-07 20:25:54 -05:00
Robby Candra
81c2c3ec11 Continuous filename scrolling (#13609) 2019-04-07 16:58:32 -05:00
Ludy
c29820f649 Suppress compile warning (#13612) 2019-04-07 16:53:30 -05:00
Scott Lahteine
a2b3ad6d0a Don't override RGB LED pins, by default 2019-04-07 16:42:26 -05:00
Bob Kuhn
9a56d90150 Fix M43 on LPC176x (#13587) 
The real fix. PR #13568 was wrong.
 2019-04-06 18:06:07 -05:00
Roxy-3D
9cee81d47e Option to show babysteps total since G28 (#13580) 2019-04-06 18:04:34 -05:00
Scott Lahteine
3221658a78 Adjust park position description 2019-04-05 20:40:50 -05:00
Scott Lahteine
028b78f623 Suppress a compile warning 2019-04-05 20:06:19 -05:00
Scott Lahteine
cf12fc8366
Expand on serial debugging (#13577) 2019-04-05 20:02:46 -05:00
Marcio Teixeira
bf7b28b456 Fix incorrect variable name (#13585) 2019-04-05 19:04:46 -05:00
Kajetan Rzepecki
27693cec29 Extend ESP32 HardwareSerial with flushTX. (#13588) 2019-04-05 19:04:02 -05:00
Alexander Gavrilenko
3c47e1b4d1 Support Black STM32F407VET6 with RAMPS-like shield (#13524) 2019-04-05 15:30:19 -05:00
VBen
0dfd76ba55 Fix Z hotend offset broken by parking extruder tool change (#13582) 2019-04-05 15:28:32 -05:00
Scott Lahteine
027a901bec Trim whitespace 2019-04-05 15:04:23 -05:00
Kajetan Rzepecki
692a0198f9 Fix SPISettings frequency parameters in ESP32 HW SPI (#13573) 2019-04-04 23:17:14 -05:00
Kajetan Rzepecki
63d95862fa Add FastIO TOGGLE for ESP32 (#13574) 2019-04-04 23:15:17 -05:00
drzejkopf
0992d1a4c8 Fix Invaders game compile error (#13575) 2019-04-04 23:13:11 -05:00
Robby Candra
cd1ef33c8c Drop extra PLR save test (#13554) 2019-04-04 22:47:00 -05:00
Scott Lahteine
72c7751768 Fix SERIAL_POS in use with DEBUG_OUT 2019-04-04 22:12:03 -05:00
Scott Lahteine
cacec5764a Clean up whitespace 2019-04-04 22:12:02 -05:00
Scott Lahteine
83e214478e Click-hold to exit Invaders, fix Brickout compile 2019-04-04 17:07:50 -05:00
Scott Lahteine
240ea1bbb3 Split up games into separate files 2019-04-04 03:06:19 -05:00
Marcio Teixeira
27a4927ed1 Add option to move away from endstop after homing. (#13557) 
Add option to move away from endstop after homing.
- Add `ENDSTOP_BACKOFF` for printers with a recessed Z home button (Lulzbot TAZ 6).
- Also prevents chattering when sensorless homing with axes against bumpers.
 2019-04-04 02:47:19 -05:00
InsanityAutomation
d44e5b1fde Fix stepper direction macros, multi-nozzle scope (#13569) 2019-04-04 02:44:07 -05:00
Scott Lahteine
10b9632bed Fix menu history item selection 2019-04-04 02:41:23 -05:00
Scott Lahteine
f1810689ff Fix bootscreen condition 2019-04-04 00:19:47 -05:00
Kajetan Rzepecki
b21ca53dfc SPIFFS-backed PersistentStore for ESP32 (#13566) 2019-04-03 20:28:26 -05:00
Scott Lahteine
af92ee9dd6 No PLR include needed in queue.cpp 2019-04-03 18:26:31 -05:00
Scott Lahteine
5d2c5877f7 DOGM bootscreen cleanup 2019-04-03 18:10:50 -05:00
Scott Lahteine
2aa35e95af More G26 arc cleanup 
Followup to #13531
 2019-04-03 16:03:21 -05:00
Scott Lahteine
20a41e2f7b SDCARD_RATHERRECENTFIRST with SDCARD_SORT_ALPHA 2019-04-02 22:25:18 -05:00
Robby Candra
46445a5a16 Event G-code for Stop SD Print (#13547) 
Co-Authored-By: 7eggert <7eggert@gmx.de>
Co-Authored-By: robbycandra <robbycandra.mail@gmail.com>
 2019-04-02 22:09:30 -05:00
Kajetan Rzepecki
2cfa9e9008 Fixed chamber-related compile error (#13552) 2019-04-01 17:53:56 -05:00
Scott Lahteine
a0a5c31c05
Power-Loss initialization fix (#13553) 
- Only save to PLR file on moves with E and X or Y
- Save to PLR after any long-ish Z downward move
 2019-04-01 17:52:45 -05:00
Scott Lahteine
8b7c3eec83 Games, for fun (and stress-testing) (#13464) 2019-04-01 17:48:54 -05:00
InsanityAutomation
fbc7b51a24 Use NO_FETCH for Dual X G28 (#13539) 2019-04-01 17:48:21 -05:00
Scott Lahteine
5de7b5b35e
Games, for fun (and stress-testing) (#13464) 2019-04-01 15:43:48 -05:00
InsanityAutomation
4961d8aa3e Update G28.cpp (#13539) 2019-03-31 19:50:40 -05:00
Scott Lahteine
de0046fc8b Fix empty HAS_TIMER macros 2019-03-30 23:04:40 -05:00
Kajetan Rzepecki
c9079165ee Fix MAX6675 readout with Hardware SPI (#13530) 2019-03-30 22:31:49 -05:00
ManuelMcLure
04086fc455 Minor optimization to ARC_SUPPORT code (#13531) 2019-03-30 22:29:37 -05:00
Robby Candra
a3f67acd6d Fix Power Loss Recovery file delete (#13522) 2019-03-30 13:14:58 -05:00
Marcio Teixeira
d992dfe7d5 Use the percent util func in the string func. (#13523) 2019-03-30 13:00:31 -05:00
drzejkopf
b1f739e27b CR10_STOCKDISPLAY support in Bigtreetech SKR (#13516) 2019-03-29 14:19:18 -05:00
Marcio Teixeira
5679fae11e UltraLCD enhancements (lower fan resolution, backlash menu) (#13519) 2019-03-29 14:07:43 -05:00
Msq001
f0d14b83bc Save/restore Relative modes in Power-Loss Recovery (#13501) 2019-03-29 13:40:42 -05:00
Marcio Teixeira
c6466c23fe Silence signed/unsigned comparison warning. (#13508) 2019-03-29 13:33:45 -05:00
InsanityAutomation
7240e3a68f Allow G26 with no heated bed (#13511) 2019-03-29 13:32:43 -05:00
Alexander Gavrilenko
6d9aaca082 Fix compilation error for MKS Robin (#13506) 2019-03-29 12:40:24 -05:00
Scott Alfter
c6dbe6e9d6 Fix Teensy 3.5/3.6 __get_primask (#13514) 2019-03-29 12:23:09 -05:00
Alexander Amelkin
e40636a7c1 Replace digitalPinHasPWM with HAS_TIMER (#13520) 2019-03-29 12:21:14 -05:00
Scott Lahteine
b46ca9aa94 Less timely comment, tweak conditions 2019-03-26 19:20:13 -05:00
InsanityAutomation
eb91f08725 Update descriptions and dont call unneeded functions 2019-03-26 11:24:52 -04:00
Ludy
fe346cd4d1 Fix DEBUG_EEPROM_READWRITE compile error (#13492) 2019-03-26 04:12:22 -05:00
Sam Lane
e3ab54753b Add extra Linear Advance factors (#13490) 2019-03-26 04:02:27 -05:00
Chris Pepper
ffc2c2d7c5 Move FAST_PWM_FAN code to HALs (#13491) 2019-03-26 01:03:23 -05:00
Thomas Moore
263f8edff8 Disable volumetric extrusion during G26 (#13479) 2019-03-25 22:41:52 -05:00
Bob Kuhn
6bd0a0be97 Relocate DUE Stepper ISR to TC0,2 (#13481) 2019-03-25 22:39:51 -05:00
Thomas Moore
13a12f8a87 Fix UBL mesh editor on delta (#13478) 2019-03-25 22:04:57 -05:00
Scott Lahteine
d2e0c03afb Remove trailing whitespace 2019-03-25 20:51:38 -05:00
Marcio Teixeira
7462fe3068 Fix compile error, squelch warnings (#13487) 
- Fix path to `bedlevel.h` include file
- Add default to `case` statements to suppress warnings
 2019-03-25 20:41:38 -05:00
Yannik Sembritzki
0d3ea59bcf Add pins for Dual Z UART on SKR 1.3 (#13474) 
Fix #13470
 2019-03-24 20:09:00 -05:00
pinchies
ef3b93daa1 Fix STM32F1 SD-based EEPROM emulation (#13475) 
If `openFile` is given `true`, then it has read-only access. Because all the writing occurs on the next line, this breaks SD card as EEPROM.
 2019-03-24 20:07:31 -05:00
Chris Pepper
aacc1148b0 Fix M106 for index > extruders (#13473) 2019-03-24 20:03:53 -05:00
Thomas Moore
c5e96544b5 Fix vtool compiler warning (#13476) 2019-03-24 20:02:28 -05:00
Thomas Moore
02dc72acb6 Disable ABL when leveling corners (#13471) 2019-03-24 20:01:18 -05:00
7eggert
d96f7d6068 Minimum segments for G2/G3. Better for small arcs. (#13466) 2019-03-24 19:53:47 -05:00
Scott Lahteine
380c771988 Handle word-padded flash-based eeprom (STM32F1) 
Fix #13445
 2019-03-24 19:14:04 -05:00
Scott Alfter
32332bcd03 Proceed with Teensy 3.5/3.6 HAL (#13450) 2019-03-24 00:08:32 -05:00
Scott Alfter
407202cc0f Fix BLTouch pre-3.0 compatibility (#13454) 2019-03-23 23:28:15 -05:00
Marcio Teixeira
a0ca98f699 Additional ExtUI features (#13449) 2019-03-23 23:09:18 -05:00
Sam Lane
a8fa275dc6 Fix Fan 0 responding to all fan speeds (#13444) 2019-03-23 23:00:31 -05:00
InsanityAutomation
5eeffab5e5 Fix BLTouch Menus (#13441) 2019-03-23 22:58:34 -05:00
Scott Lahteine
d8329d858d Default argument to defer_status_screen 2019-03-23 16:33:37 -05:00
Giuliano Zaro
9562a02c5a Update Italian language (#13440) 2019-03-20 18:26:55 -05:00
drzejkopf
70e6a3db8a Add LEVEL_CORNERS_HEIGHT to LEVEL_BED_CORNERS (#13439) 2019-03-20 18:26:12 -05:00
Roman Moravčík
f3cf95a937 Update Slovak language. (#13435) 2019-03-20 16:37:34 -05:00
Scott Lahteine
144018736a Use USES_Z_MIN_PROBE_ENDSTOP 2019-03-18 16:58:31 -05:00
InsanityAutomation
5b2c37d6c1 Followup to BLTouch (#13422) 2019-03-18 16:31:11 -05:00
InsanityAutomation
3fb8489ae3 EXTUI and UBL compilation fixes (#13420) 2019-03-17 07:57:54 -05:00
Scott Lahteine
b376c7e374 Group DISABLED items 2019-03-17 07:56:35 -05:00
Scott Lahteine
58bca67883 Unify status scrolling further 2019-03-17 07:56:35 -05:00
Scott Lahteine
c4443f885e finishstatus => finish_status 2019-03-17 07:56:35 -05:00
InsanityAutomation
691e5c3bb8 BLTouch V3.0 support (#13406) 2019-03-17 05:57:25 -05:00
Scott Lahteine
49cf92dc36
Extended condition macros (#13419) 
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
 2019-03-16 23:43:06 -05:00
Tobias Frost
d20eab4f83 Fix macro in set_color() (#13417) 2019-03-16 19:05:59 -05:00
Ludy
59353546e8 Fix BUTTON_EXISTS and misplaced comma (#13411) 
Fixes #13410 and redeclaration of `BUTTON_EXISTS`
 2019-03-16 11:59:12 -05:00
InsanityAutomation
09eb30dc05 IDEX Mirror mode based on Formbot / Vivedino Symmetric mode (#13404) 2019-03-15 22:46:27 -05:00
Scott Lahteine
5c1aa5162d Adjust M206 output in M503 for DELTA 2019-03-15 19:20:40 -05:00
Scott Lahteine
ad8b82d054 Fix KILL_PIN assignment for MKS_MINI_12864 
According to #13397
 2019-03-15 19:20:40 -05:00
Scott Lahteine
3a916b4ef2 Create bresenham.h 2019-03-15 19:20:39 -05:00
Karl Andersson
5d3928cb01 PWM is not defined on Arduino Core STM32 (#13405) 2019-03-15 19:14:06 -05:00
Scott Lahteine
9a515cbd32
Fix Pause Print message and behavior (#13394) 2019-03-14 02:26:07 -05:00
Scott Lahteine
f5bcc00570
Unify debugging output with debug_out.h (#13388) 2019-03-14 02:25:42 -05:00
Andrei Pozolotin
cc8a871705 Add capability string CHAMBER_TEMPERATURE (#13391) 
Reference: #13380
 2019-03-13 18:09:22 -05:00