075a86b076
Update LCD timing on Formbot T-Rex 2+ machines
...
The code is slightly more optimized than it used to be and this has caused the setup and hold times on the Formbot T-Rex 2+ machines to be insufficient. This change gives sufficient margin and the LCD Display is clean again.
2020-03-24 17:15:03 -05:00
7455bb09b3
Add SoftwareSerialM for MKS Robin ( #17207 )
2020-03-24 16:14:30 -05:00
717c216851
Fix Copymaster Y_MAX pin ( #17267 )
2020-03-23 17:34:38 -05:00
2c325c2a7d
Format some pins files
2020-03-21 21:18:46 -05:00
e62b52da99
Use pin/port names for CHITU pins
2020-03-21 21:18:46 -05:00
04cea864bc
Split up STM32 pins files ( #17212 )
2020-03-20 23:45:00 -05:00
c768605bde
Add Copymaster3D board ( #17188 )
2020-03-17 15:25:10 -05:00
e8205af6fb
Apply HAS_TMC_UART to pins files
2020-03-17 15:06:01 -05:00
e5dcab8fd2
ARMED support for TMC UART, probe temp ( #17186 )
2020-03-17 15:05:12 -05:00
40922c7da7
Fix MKS SBASE 1.6 E1 heater pin ( #17191 )
2020-03-17 14:51:57 -05:00
f6e80d576d
Fix Z_MIN_PROBE_PIN on SKR 1.4 ( #17187 )
2020-03-16 17:49:33 -05:00
b14c933171
LPC1768 EEPROM fallback to flash, add overrides ( #17184 )
2020-03-16 15:59:05 -05:00
118bd2f8b2
Apply loop shorthand macros ( #17159 )
2020-03-13 23:18:16 -05:00
f29d6f802f
Revert Anet 1.x envs change ( #17120 )
2020-03-11 15:08:47 -05:00
d78fbce827
Fix pio environments for Anet 1.x ( #17109 )
2020-03-10 20:04:44 -05:00
8f66dbfcd5
SD_DETECT_INVERTED => SD_DETECT_STATE ( #17112 )
2020-03-10 15:43:06 -05:00
982197b162
Fixes for Z4 axis, CS pins ( #17097 )
2020-03-08 16:31:37 -05:00
20f93404a7
Add / correct comments
2020-03-07 02:16:17 -06:00
3db784f3c7
More pins debugging cleanup
2020-03-07 02:15:05 -06:00
e9f451bffe
Pins debug followup
2020-03-06 21:59:20 -06:00
ca4423ed2a
Clean up pins debugging
2020-03-06 13:14:22 -06:00
6cd99e6a77
Add pins to the pins debug list
2020-03-06 13:14:22 -06:00
c0801e900d
Define Z_MIN_PROBE_PIN for Cohesion 3D Remix
2020-03-05 15:10:46 -06:00
e3da86fb45
Fix SKR test for ONBOARD SD
2020-03-05 13:37:09 -06:00
d4ac78535c
Allow Z_STOP_PIN override on SKR 1.4 ( #17063 )
2020-03-04 13:12:48 -06:00
72b63e9520
Fix TEMP_PROBE_PIN for SKR 1.4
...
Co-Authored-By: Anthrix <anthrix@users.noreply.github.com >
2020-03-03 14:53:22 -06:00
a698bfdc2a
Update FYSETC S6 pins/variants ( #17056 )
2020-03-03 14:30:09 -06:00
b1a50d54e2
HAS_TRINAMIC => HAS_TRINAMIC_CONFIG
2020-03-02 12:04:36 -06:00
736521a3f1
Balance mega tests, shorten some env names
2020-03-01 21:20:22 -06:00
cc822bf70f
Fix some 8 extruders issues, GTR build ( #17043 )
2020-03-01 21:19:02 -06:00
5da6819277
Fix build issues with REPRAPWORLD_KEYPAD ( #17038 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com >
2020-03-01 19:54:22 -06:00
4b256a6fa8
Revert FYSETC Mini encoder change ( #17040 )
...
Reverting #17010
2020-03-01 17:59:00 -06:00
6c9ca1bec2
Clarify GT2560 common pins ( #17021 )
2020-02-29 04:35:10 -06:00
9b145c7c73
Reverse encoder for FYSETC Mini 12864 2.1 + SKR 1.3 ( #17010 )
2020-02-28 12:26:54 -06:00
633b716a3a
Define DIAG pins for MKS SGen-L
2020-02-26 11:35:07 -06:00
28008aced0
Correct SKR expansion port pins ( #16974 )
2020-02-26 04:18:34 -06:00
70af080813
Add LPC1768 Serial ports for pinsDebug ( #16980 )
2020-02-26 04:12:53 -06:00
5b438fb20d
HAS_SDCARD_CONNECTION is more obsolete
2020-02-25 22:30:30 -06:00
6bfae5de6f
Fix SKR 1.4 Turbo SD_DETECT_PIN ( #16955 )
2020-02-25 03:17:08 -06:00
5e197df89a
Fix Babystepping loop (again)
2020-02-24 05:48:42 -06:00
2471a8bb91
Define ANET_FULL_GRAPHICS_LCD pins for SKR 1.4 ( #16928 )
2020-02-22 18:45:10 -06:00
eeec4c27e7
[ESP32] Allow user to define pins for hardware Serial1 and Serial2 ( #16918 )
2020-02-22 04:00:10 -06:00
5d16497bed
Tweak pins spacing, comments
2020-02-21 08:33:11 -06:00
9f53bbd791
Add PICA shields support ( #16891 )
2020-02-21 08:27:32 -06:00
2b788e9aa6
Single envs for specific boards
2020-02-20 20:20:15 -06:00
1087e318e5
Fix a BORG compile warning
2020-02-15 01:47:15 -06:00
63dd0f249d
Fysetc S6 pins / LCD updates ( #16830 )
2020-02-14 07:18:57 -06:00
ff0c931e47
Add RAMPS 1.4.4 to AGCM4 ( #16606 )
2020-02-13 23:28:18 -06:00
71539bcbeb
Undo driver type auto-assignment for now
...
Good general concept but needs more time to develop and group with a stepper suite.
2020-02-11 02:32:01 -06:00
e561f744fa
Update MKS BASE and v1.6 pins ( #16806 )
2020-02-10 14:12:11 -06:00
