bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
13,548 Commits 1 Branch 4 Tags 151 MiB
0550f30790
Commit Graph

303 Commits

Author SHA1 Message Date
Dirk O. Kaar
0550f30790 Renkforce configuration updates (#16017) 2019-11-26 20:22:17 -06:00
George Fu
cf1e19d167 Fysetc S6 support (#15850) 2019-11-26 16:15:03 -06:00
Dirk O. Kaar
1cea1687f3 Renkforce RF100 (V1), V2, XL, and XL Plus (#15695) 2019-11-26 14:06:23 -06:00
haschtl
ff6518c0a8 Add PID_FAN_SCALING option (#15585) 2019-11-26 03:34:43 -06:00
Scott Lahteine
441e822fb3 LULZBOT_TOUCH_UI => TOUCH_UI_FTDI_EVE 2019-11-23 17:04:17 -06:00
Scott Lahteine
bdd366b97c Update sensor -5 label 2019-11-21 04:57:57 -06:00
Scott Lahteine
20964ca7dc Bring configs up to date 2019-11-21 04:48:18 -06:00
Jason Smith
b904ba0f29 Improve Delta probing / calibration (#15887) 2019-11-21 03:26:00 -06:00
Bob
751cd1f533 MAX31865 temperature sensor (#15930) 2019-11-21 03:15:10 -06:00
Scott Lahteine
4cffee3ca3 Drop obsolete setting 2019-11-20 23:57:13 -06:00
Scott Lahteine
47e4e5f1db Update thermocouple comments 2019-11-20 23:51:51 -06:00
BigTreeTech
ab8b24fdba Power Loss Recovery with a UPS (#15943) 2019-11-20 17:40:21 -06:00
thisiskeithb
967f951789 SKR Mini E3 1.0/1.2 configs (#15941) 2019-11-20 00:12:57 -06:00
Jason Smith
2dab109baa Update Anycubic Kossel config (#15935) 2019-11-19 23:23:25 -06:00
Scott Lahteine
aa93e1f21a Update TMC_ADV examples 2019-11-15 02:15:10 -06:00
Scott Lahteine
7e9c846ec3 Modify comment for unlimited E steppers 2019-11-13 01:45:50 -06:00
Roman Moravčík
e110f5abce M73 R : Set Remaining Time (#15549) 2019-11-12 19:36:54 -06:00
Scott Lahteine
5e5045c4ee Touch UI finishing touches 2019-11-10 18:52:53 -06:00
danym21
28e1614c2e Add Sensorless Homing current (#15690) 2019-11-10 18:45:06 -06:00
LinFor
48b7a1e66e Allow non-zero "fan off" PWM value (#15709) 2019-11-10 16:33:56 -06:00
Scott Lahteine
328ddda654 Clean up whitespace 2019-11-04 13:23:26 -06:00
studiodyne
f139642e0f XY/Z Babystep Multiplicators (#15691) 2019-10-28 16:44:17 -05:00
thisiskeithb
abb44cf564 No boot-screen on Sidewinder X1 TFT28 (#15706) 2019-10-28 16:33:44 -05:00
Scott Lahteine
7a342ecb93
Show Total E during print (#15703) 2019-10-27 17:49:27 -05:00
Scott Lahteine
9720d21301 Clean up trailing whitespace 2019-10-27 15:32:29 -05:00
Scott Lahteine
c2cec563dc Followup to Cancel Objects 2019-10-27 15:26:24 -05:00
thisiskeithb
5d4e309dd3 CR-10/S/Mini & Ender-5 default TMC RMS currents (#15666) 2019-10-26 13:13:08 -05:00
Scott Lahteine
f8ad15fde8 Rename BOARD_STM32F4 to fix use with MB() 2019-10-25 18:12:29 -05:00
Scott Lahteine
93f0012959
Cancel Objects - As seen at ERRF2019 (#15590) 2019-10-24 15:35:40 -05:00
Scott Lahteine
2a7e1d459f
Option to rotate Percent, (E)lapsed, and (R)emaining time (#15578) 2019-10-24 14:00:59 -05:00
Scott Lahteine
ccf61eca84 Fix diplay elaspsed 2019-10-24 13:48:27 -05:00
Luu Lac
0b0b822671 Add note: TMC2209 requires stealthChop for Sensorless Homing (#15658) 2019-10-24 11:58:37 -05:00
Scott Lahteine
7aaa8bc8bd Bring WDi3 example up to date 2019-10-21 13:33:40 -05:00
Robby Candra
16ae9ee88b Update Configuration_adv 2019-10-17 05:37:22 +07:00
Jason Smith
832cb7e1ac Z_STEPPER_AUTO_ALIGN — To align with Z stepper points (#15195) 2019-10-16 13:39:58 -05:00
InsanityAutomation
b2eda1af2f Fix typo in G34 configuration (#15572) 2019-10-15 17:22:13 -05:00
Tanguy Pruvot
93097af0ed U20: update config, ts, serial, jerk, limited edit values... (#15524) 2019-10-15 12:35:53 -05:00
InsanityAutomation
0074d63962 Vendor version override (#14189) 
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
 2019-10-15 12:32:44 -05:00
Roxy-3D
59378db7de
Eliminate clutter in Formbot T-Rex 3 Configuration.h file 
The extra clutter was making the Junction Deviation patch script calculate the wrong value.
(The script wasn't smart enough to see the extra lines were commented out and used the wrong values in the calculation.)

All fixed now with a JUNCTION_DEVIATION_MM calculated at .017
 2019-10-11 17:11:24 -05:00
Roxy-3D
c8e348731f
Correct Junction Deviation value for Formbot Raptors 
Re-apply the formula .4 * V^2 / Default_Acceleration to work correctly in Raptor configuration.h file.
(The problem is there are multiple XJerk and YJerk values declared based on the step sticks used on the printer.)
This change should provide correct values for all setups.
 2019-10-11 16:52:47 -05:00
Roxy-3D
7a1fa2177c
Eliminate multiple DEFAULT_ACCELERATION declarations. 
Re-calculate and fix the Junction Deviation value using correct DEFAULT_ACCELERATION number.
 2019-10-11 16:31:24 -05:00
Matthew Piercey
ac8083588b Add config for Wanhao Duplicator i3 v2.1 2019-10-11 00:59:58 -05:00
LinFor
b20d5a7cc6 Estimate Remaining Time (graphical display) (#15497) 2019-10-10 21:03:33 -05:00
Roxy-3D
2cf35267c4 Set Junction Deviation value from Jerk and Default Acceleration (#15509) 
Formula: `0.4 * sq(min(xjerk, yjerk)) / (default accel)`
 2019-10-10 19:44:15 -05:00
Scott Lahteine
89490171ef Use "concatenatable" language codes 2019-10-08 20:17:23 -05:00
Scott Lahteine
c0005e939c
Enable junction deviation by default (#15481) 2019-10-08 19:42:18 -05:00
Luu Lac
e34aa1ff8f Add A8, A8 Plus, A6 logos to configs (#15489) 
Co-Authored-By: Leo <leo@nutz.de>
 2019-10-08 15:33:24 -05:00
Me No Dev
fc6a0937b8 Improve Malyan M200 integration (#15462) 2019-10-05 22:37:22 -05:00
Giuliano Zaro
a1ad01e4ab Limit Case Light PWM (#15459) 2019-10-05 22:32:50 -05:00
Scott Lahteine
1952982c01 Rearrange configs for export 2019-10-01 22:20:32 -05:00