14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) ( #10069 )
...
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
2018-03-13 01:15:22 -05:00
28f1276286
[2.0.x] Add Z_AFTER_PROBING option ( #10058 )
...
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
2018-03-11 13:07:55 -05:00
79e6d890d5
Add UNKNOWN_Z_NO_RAISE to example configs
2018-03-10 00:17:34 -06:00
6b4a928145
2uS default step pulse ( #9989 )
2018-03-07 21:11:01 -06:00
94f5204629
Move AUTO_REPORT_SD_STATUS to SDSUPPORT block
2018-03-07 01:50:30 -06:00
a2a672449a
Updated boot screen description
2018-03-03 20:04:17 -06:00
eb079959fb
Report sd card progress [FR] #9751 ( #9832 )
...
* SD Status auto-report feature
Feature Request #9751
2018-02-26 15:38:27 -06:00
4953fb1c88
Standardize encoder defaults
2018-02-24 22:34:45 -06:00
5684beae90
Bring some configs up to speed
2018-02-24 21:56:27 -06:00
92c8efdc96
Change Folger Tech i3-2020 defaults
2018-02-24 10:29:24 -06:00
2024775e07
Spanish (UTF8) Language ( #9786 )
...
From #7314 by @MrAmericanMike
2018-02-23 20:24:02 -06:00
b8485528b2
Prettify LCD_PROGRESS_BAR options
2018-02-23 19:19:57 -06:00
e65a853c59
Fix LCD_PROGRESS_BAR
...
Fix #9208
2018-02-23 14:05:10 -06:00
17d984eab3
Add RESTORE_LEVELING_AFTER_G28 to example configs
2018-02-23 13:38:54 -06:00
2bd252b501
[2.0.x] LIN_ADVANCE v1.5 ( #9712 )
2018-02-23 00:53:29 -06:00
13176dfe2f
Merge remote-tracking branch 'origin/pr-lite-st7920-status' into pr-lite-st7920-status
2018-02-22 08:02:31 -07:00
556abc0888
Add LIGHTWEIGHT_UI to example configs
2018-02-22 00:10:43 -06:00
59c98d6fd5
Hephestos2 heated bed kit for all ( #9757 )
2018-02-21 22:27:09 -06:00
7d8c6b3f3c
Add 20x4 option for Sainsmart LCD ( #9740 )
2018-02-21 00:46:25 -06:00
aada1e698f
Removed unused configuration options.
2018-02-19 16:14:33 -07:00
c7513eb032
Merge branch 'pr-lite-st7920-status' of github.com:marcio-ao/Marlin into pr-lite-st7920-status
2018-02-19 15:38:13 -07:00
8733d5a296
Add NUM_RUNOUT_SENSORS to example configs
2018-02-19 07:02:50 -06:00
ca55f2927a
Pulldown pin mode support ( #9701 )
...
Implemented for LPC1768.
2018-02-18 19:26:23 -06:00
79272f98fc
Proposed changes to ST7920 lightweight status screen
2018-02-18 02:47:31 -06:00
24eb275b99
Added a light-weight status screen for the ST7920
...
- The status screen uses the ST7920 character generator to greatly
reduce SPI traffic and MCU load when updating the status screen.
- Has been tested with the RepRapDiscount Full Graphics Smart Controller
but should work with any LCD that uses an ST7920 or fully compatible
controller.
2018-02-18 02:29:45 -06:00
60fc372211
Add CODEPENDENT_XY_HOMING to example configs
2018-02-18 00:46:04 -06:00
330437ad7c
Update LCD_SET_PROGRESS_MANUALLY in configs
2018-02-17 08:12:10 -06:00
349dafa728
config update (set to -1)
2018-02-15 21:42:54 -06:00
21e60fd3ed
Allow user to control Z-Height correction for off mesh movements ( #9661 )
2018-02-15 15:07:42 -06:00
c78e1c0f23
Fix G26 Circles... ( #9641 )
...
* Fix G26 Circles...
2018-02-15 11:15:15 -06:00
4880ac6533
Added a light-weight status screen for the ST7920
...
- The status screen uses the ST7920 character generator to greatly
reduce SPI traffic and MCU load when updating the status screen.
- Has been tested with the RepRapDiscount Full Graphics Smart Controller
but should work with any LCD that uses an ST7920 or fully compatible
controller.
2018-02-14 14:43:54 -07:00
5b70d3da1c
Update DIGIPOT_I2C_MOTOR_CURRENTS comments
2018-02-13 22:54:12 -06:00
2ec65051fd
Fix serial comment sp.
2018-02-13 22:40:56 -06:00
38c7d53bf7
Repair some spacing
2018-02-10 19:33:26 -06:00
694d2ebec0
TMC SW SPI pins in Configuration_adv.h
...
Counterpart to #9632
2018-02-08 18:49:38 -06:00
1541224a81
Enable Z axis and delta sensorless homing ( #9516 )
2018-02-08 04:20:44 -06:00
b2f8b4ada5
I2C position encoders update ( #9533 )
...
Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.
2018-02-08 03:57:11 -06:00
b5e92f4f90
[2.0.x] Enable / disable PSU automatically ( #9503 )
2018-02-06 00:22:30 -06:00
eecb0188c0
Add ULTI_CONTROLLER to example configs
2018-02-05 22:30:03 -06:00
4925f60cff
Add MALYAN_LCD to configs
2018-02-04 18:52:44 -06:00
374f2a5e16
[2.0.x] Fixed wrong information about TMC2208 wiring ( #9335 )
2018-02-02 04:45:55 -06:00
5c69d45f5b
[2.0.x] TMC2130 support for LPC platform ( #9114 )
2018-02-01 21:49:40 -06:00
7d6c009104
Add thermistor 15 tuned for JGAurora A5
2018-01-22 01:27:11 -06:00
f9dbd4d9f4
Updated FolgerTech i3-2020 config
2018-01-22 01:05:12 -06:00
8190fdb260
[2.0.x] Option to use Neopixel as case light ( #9270 )
...
* Add option to use Neopixel as case light
* Apply CASE_LIGHT_USE_NEOPIXEL to example configs
2018-01-20 16:58:41 -06:00
bfd9728cf4
Serial buffer over run work around for v2.0.0 ( #9236 )
...
* Work around for serial buffer over run
PronterFace sends a lot of M105 commands. During long operations such
as UBL's G29 P1, G29 P2, G29 P4 and G26 this can over run the serial
buffer. This results (very often) in a M1 (actually a M1M105) ending
up in the command queue.
Until we figure out a better way to resolve this issue, this will keep
the UBL commands from experiencing bogus commands at thier completion.
2018-01-18 19:57:18 -06:00
9dacd54a50
Get FT-i3-2020 configuration files into compliance with ?_BED_SIZE
2018-01-15 15:33:51 -06:00
fa432508b0
Followup to Ender config
2018-01-15 06:00:21 -06:00
02ff12d491
More up front option to show SD percentage
2018-01-14 23:32:39 -06:00
77c2d810f9
Bring configs up to date
2018-01-14 22:52:06 -06:00
