Add RAMPS 1.4.4 to AGCM4 (#16606)
This commit is contained in:
Giuliano Zaro
GitHub
611
Marlin/src/pins/samd/pins_RAMPS_144.h
Normal file
611
Marlin/src/pins/samd/pins_RAMPS_144.h
Normal file
@@ -0,0 +1,611 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* AGCM4 with RAMPS v1.4.4 pin assignments
|
||||
*/
|
||||
|
||||
#ifndef ARDUINO_GRAND_CENTRAL_M4
|
||||
#error "Oops! Select 'Adafruit Grand Central M4' in 'Tools > Board.'"
|
||||
#endif
|
||||
|
||||
#ifndef BOARD_INFO_NAME
|
||||
#define BOARD_INFO_NAME "AGCM4 RAMPS 1.4.4"
|
||||
#endif
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#define SERVO0_PIN 11
|
||||
#define SERVO1_PIN 6
|
||||
#define SERVO2_PIN 5
|
||||
#define SERVO3_PIN 4
|
||||
|
||||
//
|
||||
// EEPROM
|
||||
//
|
||||
#define E2END 0x7FFF // 32Kb (24lc256)
|
||||
#define I2C_EEPROM // EEPROM on I2C-0
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_MIN_PIN 3
|
||||
#define X_MAX_PIN 2
|
||||
#define Y_MIN_PIN 14
|
||||
#define Y_MAX_PIN 15
|
||||
#define Z_MIN_PIN 18
|
||||
#define Z_MAX_PIN 19
|
||||
|
||||
//
|
||||
// Z Probe (when not Z_MIN_PIN)
|
||||
//
|
||||
#ifndef Z_MIN_PROBE_PIN
|
||||
#define Z_MIN_PROBE_PIN 18
|
||||
#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN 67 // Mega/Due:54 - AGCM4:67
|
||||
#define X_DIR_PIN 68 // Mega/Due:55 - AGCM4:68
|
||||
#define X_ENABLE_PIN 38
|
||||
#ifndef X_CS_PIN
|
||||
#define X_CS_PIN 47
|
||||
#endif
|
||||
|
||||
#define Y_STEP_PIN 73 // Mega/Due:60 - AGCM4:73
|
||||
#define Y_DIR_PIN 74 // Mega/Due:61 - AGCM4:74
|
||||
#define Y_ENABLE_PIN 69 // Mega/Due:56 - AGCM4:69
|
||||
#ifndef Y_CS_PIN
|
||||
#define Y_CS_PIN 45
|
||||
#endif
|
||||
|
||||
#define Z_STEP_PIN 46
|
||||
#define Z_DIR_PIN 48
|
||||
#define Z_ENABLE_PIN 54 // Mega/Due:62 - AGCM4:54
|
||||
#ifndef Z_CS_PIN
|
||||
#define Z_CS_PIN 32
|
||||
#endif
|
||||
|
||||
#define Z2_STEP_PIN 36
|
||||
#define Z2_DIR_PIN 34
|
||||
#define Z2_ENABLE_PIN 30
|
||||
#ifndef Z2_CS_PIN
|
||||
#define Z2_CS_PIN 22
|
||||
#endif
|
||||
|
||||
#define E0_STEP_PIN 26
|
||||
#define E0_DIR_PIN 28
|
||||
#define E0_ENABLE_PIN 24
|
||||
#ifndef E0_CS_PIN
|
||||
#define E0_CS_PIN 43
|
||||
#endif
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN 13
|
||||
#define TEMP_BED_PIN 14
|
||||
#define TEMP_CHAMBER_PIN 15
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN 10
|
||||
#define HEATER_BED_PIN 8
|
||||
#define FAN_PIN 9
|
||||
#define FAN1_PIN 7
|
||||
#define FAN2_PIN 12
|
||||
|
||||
//
|
||||
// Misc. Functions
|
||||
//
|
||||
#define SDSS 53
|
||||
#define LED_PIN 13
|
||||
|
||||
#ifndef FILWIDTH_PIN
|
||||
#define FILWIDTH_PIN 5 // Analog Input on AUX2
|
||||
#endif
|
||||
|
||||
// RAMPS 1.4 DIO 4 on the servos connector
|
||||
#ifndef FIL_RUNOUT_PIN
|
||||
#define FIL_RUNOUT_PIN 4
|
||||
#endif
|
||||
|
||||
#ifndef PS_ON_PIN
|
||||
#define PS_ON_PIN 39
|
||||
#endif
|
||||
|
||||
#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN)
|
||||
#if NUM_SERVOS <= 1 // Prefer the servo connector
|
||||
#define CASE_LIGHT_PIN 6 // Hardware PWM
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// M3/M4/M5 - Spindle/Laser Control
|
||||
//
|
||||
#if HAS_CUTTER && !defined(SPINDLE_LASER_ENA_PIN)
|
||||
#if !NUM_SERVOS // Use servo connector if possible
|
||||
#define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown!
|
||||
#define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM
|
||||
#define SPINDLE_DIR_PIN 5
|
||||
#else
|
||||
#error "No auto-assignable Spindle/Laser pins available."
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// TMC software SPI
|
||||
//
|
||||
#if ENABLED(TMC_USE_SW_SPI)
|
||||
#ifndef TMC_SW_MOSI
|
||||
#define TMC_SW_MOSI 58 // Mega/Due:66 - AGCM4:58
|
||||
#endif
|
||||
#ifndef TMC_SW_MISO
|
||||
#define TMC_SW_MISO 44
|
||||
#endif
|
||||
#ifndef TMC_SW_SCK
|
||||
#define TMC_SW_SCK 56 // Mega/Due:64 - AGCM4:56
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if HAS_TMC220x
|
||||
/**
|
||||
* TMC2208/TMC2209 stepper drivers
|
||||
*
|
||||
* Hardware serial communication ports.
|
||||
* If undefined software serial is used according to the pins below
|
||||
*/
|
||||
//#define X_HARDWARE_SERIAL Serial1
|
||||
//#define X2_HARDWARE_SERIAL Serial1
|
||||
//#define Y_HARDWARE_SERIAL Serial1
|
||||
//#define Y2_HARDWARE_SERIAL Serial1
|
||||
//#define Z_HARDWARE_SERIAL Serial1
|
||||
//#define Z2_HARDWARE_SERIAL Serial1
|
||||
//#define E0_HARDWARE_SERIAL Serial1
|
||||
//#define E1_HARDWARE_SERIAL Serial1
|
||||
//#define E2_HARDWARE_SERIAL Serial1
|
||||
//#define E3_HARDWARE_SERIAL Serial1
|
||||
//#define E4_HARDWARE_SERIAL Serial1
|
||||
|
||||
//
|
||||
// Software serial
|
||||
//
|
||||
|
||||
#ifndef X_SERIAL_TX_PIN
|
||||
#define X_SERIAL_TX_PIN 47
|
||||
#endif
|
||||
#ifndef X_SERIAL_RX_PIN
|
||||
#define X_SERIAL_RX_PIN 47
|
||||
#endif
|
||||
#ifndef X2_SERIAL_TX_PIN
|
||||
#define X2_SERIAL_TX_PIN -1
|
||||
#endif
|
||||
#ifndef X2_SERIAL_RX_PIN
|
||||
#define X2_SERIAL_RX_PIN -1
|
||||
#endif
|
||||
|
||||
#ifndef Y_SERIAL_TX_PIN
|
||||
#define Y_SERIAL_TX_PIN 45
|
||||
#endif
|
||||
#ifndef Y_SERIAL_RX_PIN
|
||||
#define Y_SERIAL_RX_PIN 45
|
||||
#endif
|
||||
#ifndef Y2_SERIAL_TX_PIN
|
||||
#define Y2_SERIAL_TX_PIN -1
|
||||
#endif
|
||||
#ifndef Y2_SERIAL_RX_PIN
|
||||
#define Y2_SERIAL_RX_PIN -1
|
||||
#endif
|
||||
|
||||
#ifndef Z_SERIAL_TX_PIN
|
||||
#define Z_SERIAL_TX_PIN 32
|
||||
#endif
|
||||
#ifndef Z_SERIAL_RX_PIN
|
||||
#define Z_SERIAL_RX_PIN 32
|
||||
#endif
|
||||
#ifndef Z2_SERIAL_TX_PIN
|
||||
#define Z2_SERIAL_TX_PIN 22
|
||||
#endif
|
||||
#ifndef Z2_SERIAL_RX_PIN
|
||||
#define Z2_SERIAL_RX_PIN 22
|
||||
#endif
|
||||
|
||||
#ifndef E0_SERIAL_TX_PIN
|
||||
#define E0_SERIAL_TX_PIN 43
|
||||
#endif
|
||||
#ifndef E0_SERIAL_RX_PIN
|
||||
#define E0_SERIAL_RX_PIN 43
|
||||
#endif
|
||||
#ifndef E1_SERIAL_TX_PIN
|
||||
#define E1_SERIAL_TX_PIN -1
|
||||
#endif
|
||||
#ifndef E1_SERIAL_RX_PIN
|
||||
#define E1_SERIAL_RX_PIN -1
|
||||
#endif
|
||||
#ifndef E2_SERIAL_TX_PIN
|
||||
#define E2_SERIAL_TX_PIN -1
|
||||
#endif
|
||||
#ifndef E2_SERIAL_RX_PIN
|
||||
#define E2_SERIAL_RX_PIN -1
|
||||
#endif
|
||||
#ifndef E3_SERIAL_TX_PIN
|
||||
#define E3_SERIAL_TX_PIN -1
|
||||
#endif
|
||||
#ifndef E3_SERIAL_RX_PIN
|
||||
#define E3_SERIAL_RX_PIN -1
|
||||
#endif
|
||||
#ifndef E4_SERIAL_TX_PIN
|
||||
#define E4_SERIAL_TX_PIN -1
|
||||
#endif
|
||||
#ifndef E4_SERIAL_RX_PIN
|
||||
#define E4_SERIAL_RX_PIN -1
|
||||
#endif
|
||||
#ifndef E5_SERIAL_TX_PIN
|
||||
#define E5_SERIAL_TX_PIN -1
|
||||
#endif
|
||||
#ifndef E5_SERIAL_RX_PIN
|
||||
#define E5_SERIAL_RX_PIN -1
|
||||
#endif
|
||||
#ifndef E6_SERIAL_TX_PIN
|
||||
#define E6_SERIAL_TX_PIN -1
|
||||
#endif
|
||||
#ifndef E6_SERIAL_RX_PIN
|
||||
#define E6_SERIAL_RX_PIN -1
|
||||
#endif
|
||||
#ifndef E7_SERIAL_TX_PIN
|
||||
#define E7_SERIAL_TX_PIN -1
|
||||
#endif
|
||||
#ifndef E7_SERIAL_RX_PIN
|
||||
#define E7_SERIAL_RX_PIN -1
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//////////////////////////
|
||||
// LCDs and Controllers //
|
||||
//////////////////////////
|
||||
|
||||
#if HAS_SPI_LCD
|
||||
|
||||
//
|
||||
// LCD Display output pins
|
||||
//
|
||||
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
|
||||
|
||||
// TO TEST
|
||||
// #define LCD_PINS_RS 49 // CS chip select /SS chip slave select
|
||||
// #define LCD_PINS_ENABLE 51 // SID (MOSI)
|
||||
// #define LCD_PINS_D4 52 // SCK (CLK) clock
|
||||
|
||||
#elif BOTH(NEWPANEL, PANEL_ONE)
|
||||
|
||||
// TO TEST
|
||||
// #define LCD_PINS_RS 40
|
||||
// #define LCD_PINS_ENABLE 42
|
||||
// #define LCD_PINS_D4 57 // Mega/Due:65 - AGCM4:57
|
||||
// #define LCD_PINS_D5 58 // Mega/Due:66 - AGCM4:58
|
||||
// #define LCD_PINS_D6 44
|
||||
// #define LCD_PINS_D7 56 // Mega/Due:64 - AGCM4:56
|
||||
|
||||
#else
|
||||
|
||||
#if ENABLED(CR10_STOCKDISPLAY)
|
||||
|
||||
// TO TEST
|
||||
// #define LCD_PINS_RS 27
|
||||
// #define LCD_PINS_ENABLE 29
|
||||
// #define LCD_PINS_D4 25
|
||||
|
||||
#if DISABLED(NEWPANEL)
|
||||
// TO TEST
|
||||
// #define BEEPER_PIN 37
|
||||
#endif
|
||||
|
||||
#elif ENABLED(ZONESTAR_LCD)
|
||||
|
||||
// TO TEST
|
||||
// #define LCD_PINS_RS 56 // Mega/Due:64 - AGCM4:56
|
||||
// #define LCD_PINS_ENABLE 44
|
||||
// #define LCD_PINS_D4 55 // Mega/Due:63 - AGCM4:55
|
||||
// #define LCD_PINS_D5 40
|
||||
// #define LCD_PINS_D6 42
|
||||
// #define LCD_PINS_D7 57 // Mega/Due:65 - AGCM4:57
|
||||
|
||||
#else
|
||||
|
||||
#if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306)
|
||||
// TO TEST
|
||||
// #define LCD_PINS_DC 25 // Set as output on init
|
||||
// #define LCD_PINS_RS 27 // Pull low for 1s to init
|
||||
// DOGM SPI LCD Support
|
||||
// #define DOGLCD_CS 16
|
||||
// #define DOGLCD_MOSI 17
|
||||
// #define DOGLCD_SCK 23
|
||||
// #define DOGLCD_A0 LCD_PINS_DC
|
||||
#else
|
||||
#define LCD_PINS_RS 16
|
||||
#define LCD_PINS_ENABLE 17
|
||||
#define LCD_PINS_D4 23
|
||||
#define LCD_PINS_D5 25
|
||||
#define LCD_PINS_D6 27
|
||||
#endif
|
||||
|
||||
#define LCD_PINS_D7 29
|
||||
|
||||
#if DISABLED(NEWPANEL)
|
||||
#define BEEPER_PIN 33
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
#if DISABLED(NEWPANEL)
|
||||
// Buttons attached to a shift register
|
||||
// Not wired yet
|
||||
//#define SHIFT_CLK 38
|
||||
//#define SHIFT_LD 42
|
||||
//#define SHIFT_OUT 40
|
||||
//#define SHIFT_EN 17
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
//
|
||||
// LCD Display input pins
|
||||
//
|
||||
#if ENABLED(NEWPANEL)
|
||||
|
||||
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
|
||||
|
||||
#define BEEPER_PIN 37
|
||||
|
||||
#if ENABLED(CR10_STOCKDISPLAY)
|
||||
// TO TEST
|
||||
// #define BTN_EN1 17
|
||||
// #define BTN_EN2 23
|
||||
#else
|
||||
#define BTN_EN1 31
|
||||
#define BTN_EN2 33
|
||||
#endif
|
||||
|
||||
#define BTN_ENC 35
|
||||
#ifndef SD_DETECT_PIN
|
||||
#define SD_DETECT_PIN 49
|
||||
#endif
|
||||
#define KILL_PIN 41
|
||||
|
||||
#if ENABLED(BQ_LCD_SMART_CONTROLLER)
|
||||
// TO TEST
|
||||
// #define LCD_BACKLIGHT_PIN 39
|
||||
#endif
|
||||
|
||||
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
|
||||
|
||||
// TO TEST
|
||||
// #define BTN_EN1 56 // Mega/Due:64 - AGCM4:56
|
||||
// #define BTN_EN2 72 // Mega/Due:59 - AGCM4:72
|
||||
// #define BTN_ENC 55
|
||||
// #define SD_DETECT_PIN 42
|
||||
|
||||
#elif ENABLED(LCD_I2C_PANELOLU2)
|
||||
|
||||
// TO TEST
|
||||
// #define BTN_EN1 47
|
||||
// #define BTN_EN2 43
|
||||
// #define BTN_ENC 32
|
||||
// #define LCD_SDSS SDSS
|
||||
// #define KILL_PIN 41
|
||||
|
||||
#elif ENABLED(LCD_I2C_VIKI)
|
||||
|
||||
// TO TEST
|
||||
// #define BTN_EN1 40 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
|
||||
// #define BTN_EN2 42
|
||||
// #define BTN_ENC -1
|
||||
|
||||
// #define LCD_SDSS SDSS
|
||||
// #define SD_DETECT_PIN 49
|
||||
|
||||
#elif ANY(VIKI2, miniVIKI)
|
||||
|
||||
// TO TEST
|
||||
// #define DOGLCD_CS 45
|
||||
// #define DOGLCD_A0 44
|
||||
// #define LCD_SCREEN_ROT_180
|
||||
|
||||
// #define BEEPER_PIN 33
|
||||
// #define STAT_LED_RED_PIN 32
|
||||
// #define STAT_LED_BLUE_PIN 35
|
||||
|
||||
// #define BTN_EN1 22
|
||||
// #define BTN_EN2 7
|
||||
// #define BTN_ENC 39
|
||||
|
||||
// #define SD_DETECT_PIN -1 // Pin 49 for display SD interface, 72 for easy adapter board
|
||||
// #define KILL_PIN 31
|
||||
|
||||
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
|
||||
|
||||
// TO TEST
|
||||
// #define DOGLCD_CS 29
|
||||
// #define DOGLCD_A0 27
|
||||
|
||||
// #define BEEPER_PIN 23
|
||||
// #define LCD_BACKLIGHT_PIN 33
|
||||
|
||||
// #define BTN_EN1 35
|
||||
// #define BTN_EN2 37
|
||||
// #define BTN_ENC 31
|
||||
|
||||
// #define LCD_SDSS SDSS
|
||||
// #define SD_DETECT_PIN 49
|
||||
// #define KILL_PIN 41
|
||||
|
||||
#elif EITHER(MKS_MINI_12864, FYSETC_MINI_12864)
|
||||
|
||||
// TO TEST
|
||||
//#define BEEPER_PIN 37
|
||||
//#define BTN_ENC 35
|
||||
//#define SD_DETECT_PIN 49
|
||||
|
||||
//#ifndef KILL_PIN
|
||||
// #define KILL_PIN 41
|
||||
//#endif
|
||||
|
||||
#if ENABLED(MKS_MINI_12864) // Added in Marlin 1.1.6
|
||||
|
||||
// TO TEST
|
||||
// #define DOGLCD_A0 27
|
||||
// #define DOGLCD_CS 25
|
||||
|
||||
// GLCD features
|
||||
// Uncomment screen orientation
|
||||
// #define LCD_SCREEN_ROT_90
|
||||
// #define LCD_SCREEN_ROT_180
|
||||
// #define LCD_SCREEN_ROT_270
|
||||
|
||||
// not connected to a pin
|
||||
// #define LCD_BACKLIGHT_PIN 57 // backlight LED on A11/D? (Mega/Due:65 - AGCM4:57)
|
||||
|
||||
// #define BTN_EN1 31
|
||||
// #define BTN_EN2 33
|
||||
|
||||
#elif ENABLED(FYSETC_MINI_12864)
|
||||
|
||||
// From https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8
|
||||
|
||||
// TO TEST
|
||||
// #define DOGLCD_A0 16
|
||||
// #define DOGLCD_CS 17
|
||||
|
||||
// #define BTN_EN1 33
|
||||
// #define BTN_EN2 31
|
||||
|
||||
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
|
||||
// results in LCD soft SPI mode 3, SD soft SPI mode 0
|
||||
|
||||
// #define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally.
|
||||
|
||||
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
|
||||
#ifndef RGB_LED_R_PIN
|
||||
// TO TEST
|
||||
// #define RGB_LED_R_PIN 25
|
||||
#endif
|
||||
#ifndef RGB_LED_G_PIN
|
||||
// TO TEST
|
||||
// #define RGB_LED_G_PIN 27
|
||||
#endif
|
||||
#ifndef RGB_LED_B_PIN
|
||||
// TO TEST
|
||||
// #define RGB_LED_B_PIN 29
|
||||
#endif
|
||||
#elif ENABLED(FYSETC_MINI_12864_2_1)
|
||||
// TO TEST
|
||||
// #define NEOPIXEL_PIN 25
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
#elif ENABLED(MINIPANEL)
|
||||
|
||||
// TO TEST
|
||||
// #define BEEPER_PIN 42
|
||||
// not connected to a pin
|
||||
// #define LCD_BACKLIGHT_PIN 57 // backlight LED on A11/D? (Mega/Due:65 - AGCM4:57)
|
||||
|
||||
// #define DOGLCD_A0 44
|
||||
// #define DOGLCD_CS 58 // Mega/Due:66 - AGCM4:58
|
||||
|
||||
// GLCD features
|
||||
// Uncomment screen orientation
|
||||
// #define LCD_SCREEN_ROT_90
|
||||
// #define LCD_SCREEN_ROT_180
|
||||
// #define LCD_SCREEN_ROT_270
|
||||
|
||||
// #define BTN_EN1 40
|
||||
// #define BTN_EN2 55 // Mega/Due:63 - AGCM4:55
|
||||
// #define BTN_ENC 72 // Mega/Due:59 - AGCM4:72
|
||||
|
||||
// #define SD_DETECT_PIN 49
|
||||
// #define KILL_PIN 56 // Mega/Due:64 - AGCM4:56
|
||||
|
||||
#elif ENABLED(ZONESTAR_LCD)
|
||||
|
||||
// TO TEST
|
||||
// #define ADC_KEYPAD_PIN 12
|
||||
|
||||
#elif ENABLED(AZSMZ_12864)
|
||||
|
||||
// TO TEST
|
||||
|
||||
#else
|
||||
|
||||
// Beeper on AUX-4
|
||||
// #define BEEPER_PIN 33
|
||||
|
||||
// Buttons are directly attached to AUX-2
|
||||
#if ENABLED(REPRAPWORLD_KEYPAD)
|
||||
// TO TEST
|
||||
// #define SHIFT_OUT 40
|
||||
// #define SHIFT_CLK 44
|
||||
// #define SHIFT_LD 42
|
||||
// #define BTN_EN1 56 // Mega/Due:64 - AGCM4:56
|
||||
// #define BTN_EN2 72 // Mega/Due:59 - AGCM4:72
|
||||
// #define BTN_ENC 55 // Mega/Due:63 - AGCM4:55
|
||||
#elif ENABLED(PANEL_ONE)
|
||||
// TO TEST
|
||||
// #define BTN_EN1 72 // AUX2 PIN 3 (Mega/Due:59 - AGCM4:72)
|
||||
// #define BTN_EN2 55 // AUX2 PIN 4 (Mega/Due:63 - AGCM4:55)
|
||||
// #define BTN_ENC 49 // AUX3 PIN 7
|
||||
#else
|
||||
// TO TEST
|
||||
// #define BTN_EN1 37
|
||||
// #define BTN_EN2 35
|
||||
// #define BTN_ENC 31
|
||||
#endif
|
||||
|
||||
#if ENABLED(G3D_PANEL)
|
||||
// TO TEST
|
||||
// #define SD_DETECT_PIN 49
|
||||
// #define KILL_PIN 41
|
||||
#endif
|
||||
|
||||
#endif
|
||||
#endif // NEWPANEL
|
||||
|
||||
#endif // HAS_SPI_LCD
|
||||
|
||||
//
|
||||
// SD Support
|
||||
//
|
||||
#ifndef SDCARD_CONNECTION
|
||||
#define SDCARD_CONNECTION ONBOARD
|
||||
#endif
|
||||
|
||||
#if SD_CONNECTION_IS(ONBOARD)
|
||||
#undef SDSS
|
||||
#define SDSS 83
|
||||
#undef SD_DETECT_PIN
|
||||
#define SD_DETECT_PIN 95
|
||||
#endif
|
||||
Reference in New Issue
Block a user