🔨 Consolidate STM32 extra_scripts (#22365)
This commit is contained in:
Scott Lahteine
committed by
Scott Lahteine
Scott Lahteine
parent
a5459a68a6
commit
fef76a76a3
@ -29,6 +29,11 @@ board = armed_v1
|
||||
build_flags = ${common_stm32.build_flags}
|
||||
-O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing
|
||||
|
||||
[stm32f4_variant]
|
||||
extra_scripts = ${common.extra_scripts}
|
||||
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
|
||||
buildroot/share/PlatformIO/scripts/offset_and_rename.py
|
||||
|
||||
#
|
||||
# STM32F401VE
|
||||
# 'STEVAL-3DP001V1' STM32F401VE board - https://www.st.com/en/evaluation-tools/steval-3dp001v1.html
|
||||
@ -40,8 +45,7 @@ board = marlin_STEVAL_STM32F401VE
|
||||
build_flags = ${common_stm32.build_flags}
|
||||
-DARDUINO_STEVAL -DSTM32F401xE
|
||||
-DDISABLE_GENERIC_SERIALUSB -DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS
|
||||
extra_scripts = ${common.extra_scripts}
|
||||
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
|
||||
extra_scripts = ${stm32f4_variant.extra_scripts}
|
||||
|
||||
#
|
||||
# STM32F401RC
|
||||
@ -51,8 +55,7 @@ platform = ${common_stm32.platform}
|
||||
extends = common_stm32
|
||||
board = marlin_FYSETC_CHEETAH_V20
|
||||
build_flags = ${common_stm32.build_flags} -DSTM32F401xC -DVECT_TAB_OFFSET=0xC000
|
||||
extra_scripts = ${common.extra_scripts}
|
||||
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
|
||||
extra_scripts = ${stm32f4_variant.extra_scripts}
|
||||
|
||||
#
|
||||
# FLYF407ZG
|
||||
@ -65,8 +68,7 @@ board_build.variant = MARLIN_FLY_F407ZG
|
||||
upload_protocol = dfu
|
||||
build_flags = ${common_stm32.build_flags}
|
||||
-DVECT_TAB_OFFSET=0x8000
|
||||
extra_scripts = ${common.extra_scripts}
|
||||
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
|
||||
extra_scripts = ${stm32f4_variant.extra_scripts}
|
||||
|
||||
#
|
||||
# FYSETC S6 (STM32F446RET6 ARM Cortex-M4)
|
||||
@ -77,8 +79,7 @@ extends = common_stm32
|
||||
platform_packages = tool-stm32duino
|
||||
board = marlin_fysetc_s6
|
||||
build_flags = ${common_stm32.build_flags} -DVECT_TAB_OFFSET=0x10000 -DHAL_PCD_MODULE_ENABLED
|
||||
extra_scripts = ${common.extra_scripts}
|
||||
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
|
||||
extra_scripts = ${stm32f4_variant.extra_scripts}
|
||||
debug_tool = stlink
|
||||
upload_protocol = dfu
|
||||
upload_command = dfu-util -a 0 -s 0x08010000:leave -D "$SOURCE"
|
||||
@ -93,9 +94,7 @@ board = marlin_fysetc_s6_8000
|
||||
board_build.offset = 0x8000
|
||||
board_upload.offset_address = 0x08008000
|
||||
build_flags = ${common_stm32.build_flags} -DHAL_PCD_MODULE_ENABLED
|
||||
extra_scripts = ${common.extra_scripts}
|
||||
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
|
||||
buildroot/share/PlatformIO/scripts/stm32_bootloader.py
|
||||
extra_scripts = ${stm32f4_variant.extra_scripts}
|
||||
upload_command = dfu-util -a 0 -s 0x08008000:leave -D "$SOURCE"
|
||||
|
||||
#
|
||||
@ -110,8 +109,7 @@ board = marlin_blackSTM32F407VET6
|
||||
build_flags = ${common_stm32.build_flags}
|
||||
-DARDUINO_BLACK_F407VE
|
||||
-DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS
|
||||
extra_scripts = ${common.extra_scripts}
|
||||
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
|
||||
extra_scripts = ${stm32f4_variant.extra_scripts}
|
||||
|
||||
#
|
||||
# Anet ET4-MB_V1.x/ET4P-MB_V1.x (STM32F407VGT6 ARM Cortex-M4)
|
||||
@ -126,15 +124,12 @@ board = marlin_STM32F407VGT6_CCM
|
||||
board_build.core = stm32
|
||||
board_build.variant = MARLIN_F4x7Vx
|
||||
board_build.encrypt = firmware.srec
|
||||
# Just openblt.py (not stm32_bootloader.py) generates the file
|
||||
board_build.offset = 0x10000
|
||||
board_upload.offset_address = 0x08010000
|
||||
build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483
|
||||
debug_tool = jlink
|
||||
upload_protocol = jlink
|
||||
extra_scripts = ${common.extra_scripts}
|
||||
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
|
||||
buildroot/share/PlatformIO/scripts/stm32_bootloader.py
|
||||
extra_scripts = ${stm32f4_variant.extra_scripts}
|
||||
buildroot/share/PlatformIO/scripts/openblt.py
|
||||
|
||||
#
|
||||
@ -146,8 +141,7 @@ extends = common_stm32
|
||||
board = marlin_BigTree_SKR_Pro
|
||||
build_flags = ${common_stm32.build_flags}
|
||||
-DSTM32F407_5ZX -DVECT_TAB_OFFSET=0x8000
|
||||
extra_scripts = ${common.extra_scripts}
|
||||
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
|
||||
extra_scripts = ${stm32f4_variant.extra_scripts}
|
||||
#upload_protocol = stlink
|
||||
#upload_command = "$PROJECT_PACKAGES_DIR/tool-stm32duino/stlink/ST-LINK_CLI.exe" -c SWD -P "$BUILD_DIR/firmware.bin" 0x8008000 -Rst -Run
|
||||
debug_tool = stlink
|
||||
@ -183,8 +177,7 @@ board_build.variant = MARLIN_BIGTREE_E3_RRF
|
||||
build_flags = ${common_stm32.build_flags}
|
||||
-DSTM32F407_5VX -DVECT_TAB_OFFSET=0x8000
|
||||
-DSERIAL_RX_BUFFER_SIZE=255 -DSERIAL_TX_BUFFER_SIZE=255
|
||||
extra_scripts = ${common.extra_scripts}
|
||||
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
|
||||
extra_scripts = ${stm32f4_variant.extra_scripts}
|
||||
|
||||
#
|
||||
# Bigtreetech GTR V1.0 (STM32F407IGT6 ARM Cortex-M4)
|
||||
@ -193,8 +186,7 @@ extra_scripts = ${common.extra_scripts}
|
||||
platform = ${common_stm32.platform}
|
||||
extends = common_stm32
|
||||
board = marlin_BigTree_GTR_v1
|
||||
extra_scripts = ${common.extra_scripts}
|
||||
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
|
||||
extra_scripts = ${stm32f4_variant.extra_scripts}
|
||||
build_flags = ${common_stm32.build_flags}
|
||||
-DSTM32F407IX -DVECT_TAB_OFFSET=0x8000
|
||||
|
||||
@ -221,8 +213,7 @@ build_flags = ${common_stm32.build_flags}
|
||||
-DHAVE_HWSERIAL3
|
||||
-DPIN_SERIAL2_RX=PD_6
|
||||
-DPIN_SERIAL2_TX=PD_5
|
||||
extra_scripts = ${common.extra_scripts}
|
||||
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
|
||||
extra_scripts = ${stm32f4_variant.extra_scripts}
|
||||
|
||||
#
|
||||
# BigTreeTech SKR V2.0 (STM32F407VGT6 ARM Cortex-M4) with USB Flash Drive Support
|
||||
@ -236,10 +227,8 @@ board_build.core = stm32
|
||||
board_build.variant = MARLIN_F4x7Vx
|
||||
board_build.offset = 0x8000
|
||||
board_upload.offset_address = 0x08008000
|
||||
extra_scripts = ${common.extra_scripts}
|
||||
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
|
||||
buildroot/share/PlatformIO/scripts/stm32_bootloader.py
|
||||
build_flags = ${stm_flash_drive.build_flags}
|
||||
extra_scripts = ${stm32f4_variant.extra_scripts}
|
||||
build_flags = ${stm_flash_drive.build_flags}
|
||||
-DUSE_USBHOST_HS -DUSE_USB_HS_IN_FS -DUSBD_IRQ_PRIO=5 -DUSBD_IRQ_SUBPRIO=6
|
||||
-DHSE_VALUE=8000000U -DHAL_SD_MODULE_ENABLED
|
||||
|
||||
@ -260,8 +249,7 @@ build_flags = ${env:BIGTREE_SKR_2.build_flags} -DUSBD_USE_CDC_MSC
|
||||
platform = ${common_stm32.platform}
|
||||
extends = common_stm32
|
||||
board = marlin_BigTree_Octopus_v1
|
||||
extra_scripts = ${common.extra_scripts}
|
||||
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
|
||||
extra_scripts = ${stm32f4_variant.extra_scripts}
|
||||
build_flags = ${common_stm32.build_flags}
|
||||
-DSTM32F446_5VX -DVECT_TAB_OFFSET=0x8000 -DUSE_USB_HS_IN_FS
|
||||
|
||||
@ -286,9 +274,7 @@ board = marlin_STM32F407ZGT6
|
||||
board_build.variant = MARLIN_LERDGE
|
||||
board_build.offset = 0x10000
|
||||
board_build.encrypt = firmware.bin
|
||||
extra_scripts = ${common.extra_scripts}
|
||||
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
|
||||
buildroot/share/PlatformIO/scripts/stm32_bootloader.py
|
||||
extra_scripts = ${stm32f4_variant.extra_scripts}
|
||||
buildroot/share/PlatformIO/scripts/lerdge.py
|
||||
build_flags = ${common_stm32.build_flags}
|
||||
-DSTM32F4 -DSTM32F4xx -DTARGET_STM32F4
|
||||
@ -366,9 +352,7 @@ monitor_speed = 500000
|
||||
board_build.core = stm32
|
||||
board_build.variant = MARLIN_F446VE
|
||||
board_build.offset = 0x0000
|
||||
extra_scripts = ${common.extra_scripts}
|
||||
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
|
||||
buildroot/share/PlatformIO/scripts/stm32_bootloader.py
|
||||
extra_scripts = ${stm32f4_variant.extra_scripts}
|
||||
|
||||
#
|
||||
# MKS Robin Pro V2
|
||||
@ -386,9 +370,7 @@ board_upload.offset_address = 0x08000000
|
||||
build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC
|
||||
debug_tool = jlink
|
||||
upload_protocol = jlink
|
||||
extra_scripts = ${common.extra_scripts}
|
||||
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
|
||||
buildroot/share/PlatformIO/scripts/stm32_bootloader.py
|
||||
extra_scripts = ${stm32f4_variant.extra_scripts}
|
||||
|
||||
#
|
||||
# This SPI is used by Robin Nano V3
|
||||
@ -412,9 +394,7 @@ board_upload.offset_address = 0x0800C000
|
||||
build_unflags = ${common_stm32.build_unflags}
|
||||
debug_tool = jlink
|
||||
upload_protocol = jlink
|
||||
extra_scripts = ${common.extra_scripts}
|
||||
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
|
||||
buildroot/share/PlatformIO/scripts/stm32_bootloader.py
|
||||
extra_scripts = ${stm32f4_variant.extra_scripts}
|
||||
|
||||
#
|
||||
# MKS Robin Nano V3 with USB Flash Drive Support
|
||||
|
||||
Reference in New Issue
Block a user